Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

18 files changed, 59 insertions, 12 deletions

diff --git a/README b/README
index 895fef37e81..a0646c36657 100644
--- a/README
+++ b/README
@@ -423,6 +423,11 @@ The following options need to be configured:
 		CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 		This value denotes start offset of DSP CCSR space.
 
+		CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+		Single Source Clock is clocking mode present in some of FSL SoC's.
+		In this mode, a single differential clock is used to supply
+		clocks to the sysclock, ddrclock and usbclock.
+
 - Generic CPU options:
 		CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
 
@@ -3267,6 +3272,9 @@ FIT uImage format:
 		Defines the size and behavior of the NAND that SPL uses
 		to read U-Boot
 
+		CONFIG_SPL_NAND_BOOT
+		Add support NAND boot
+
 		CONFIG_SYS_NAND_U_BOOT_OFFS
 		Location in NAND to read U-Boot from
 
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 7c7467f7bfc..35867dffdd7 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -74,12 +74,33 @@ void get_sys_info(sys_info_t *sys_info)
 	uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
 	unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
 	uint mem_pll_rat;
+#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+	uint single_src;
+#endif
 
 	sys_info->freq_systembus = sysclk;
+#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+	/*
+	 * DDR_REFCLK_SEL rcw bit is used to determine if DDR PLLS
+	 * are driven by separate DDR Refclock or single source
+	 * differential clock.
+	 */
+	single_src = (in_be32(&gur->rcwsr[5]) >>
+		      FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_SHIFT) &
+		      FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_MASK;
+	/*
+	 * For single source clocking, both ddrclock and syclock
+	 * are driven by differential sysclock.
+	 */
+	if (single_src == FSL_CORENET2_RCWSR5_DDR_REFCLK_SINGLE_CLK) {
+		printf("Single Source Clock Configuration\n");
+		sys_info->freq_ddrbus = CONFIG_SYS_CLK_FREQ;
+	} else
+#endif
 #ifdef CONFIG_DDR_CLK_FREQ
-	sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
+		sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
 #else
-	sys_info->freq_ddrbus = sysclk;
+		sys_info->freq_ddrbus = sysclk;
 #endif
 
 	sys_info->freq_systembus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 244ccbf24fc..54ce2f053cc 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -711,6 +711,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define CONFIG_FM_PLAT_CLK_DIV	1
 #define CONFIG_SYS_FM1_CLK		CONFIG_FM_PLAT_CLK_DIV
 #define CONFIG_SYS_FM_MURAM_SIZE	0x30000
+#define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
 #define CONFIG_SYS_FSL_TBCLK_DIV	16
 #define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v2.4"
 #define CONFIG_SYS_FSL_USB1_PHY_ENABLE
@@ -745,7 +746,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define CONFIG_SYS_NUM_FM1_DTSEC	6
 #define CONFIG_SYS_NUM_FM1_10GEC	2
 #endif
-#define CONFIG_SYS_FSL_NUM_USB_CTRLS	2
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_PME_PLAT_CLK_DIV		1
 #define CONFIG_SYS_PME_CLK		CONFIG_PME_PLAT_CLK_DIV
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 672e8c6650c..68c3c824533 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1774,6 +1774,9 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S3_PLL2	0x00040000
 #define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL1	0x00020000
 #define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL2	0x00010000
+#define FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_SHIFT 4
+#define FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_MASK	0x00000011
+#define FSL_CORENET2_RCWSR5_DDR_REFCLK_SINGLE_CLK	1
 
 #else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
 #define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT	17
diff --git a/board/freescale/b4860qds/b4_rcw.cfg b/board/freescale/b4860qds/b4_rcw.cfg
index 577dabf1d28..597d3914ca4 100644
--- a/board/freescale/b4860qds/b4_rcw.cfg
+++ b/board/freescale/b4860qds/b4_rcw.cfg
@@ -2,6 +2,6 @@
 aa55aa55 010e0100
 # serdes protocol 0x2A_0x98
 140e0018 0f001218 00000000 00000000
-54980000 9000a000 f8025000 a9000000
+54980000 9000a000 e8104000 a9000000
 01000000 00000000 00000000 0001b1f8
 00000000 14000020 00000000 00000011
diff --git a/board/freescale/bsc9131rdb/tlb.c b/board/freescale/bsc9131rdb/tlb.c
index 669fe8ad32c..c8ecf5de591 100644
--- a/board/freescale/bsc9131rdb/tlb.c
+++ b/board/freescale/bsc9131rdb/tlb.c
@@ -30,7 +30,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_4K, 1),
-#ifdef CONFIG_SPL_NAND_MINIMAL
+#ifdef CONFIG_SPL_NAND_BOOT
 	SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 10, BOOKE_PAGESZ_4K, 1),
diff --git a/board/freescale/bsc9132qds/tlb.c b/board/freescale/bsc9132qds/tlb.c
index 02655e9bafd..07febc2b375 100644
--- a/board/freescale/bsc9132qds/tlb.c
+++ b/board/freescale/bsc9132qds/tlb.c
@@ -30,7 +30,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_4K, 1),
-#ifdef CONFIG_SPL_NAND_MINIMAL
+#ifdef CONFIG_SPL_NAND_BOOT
 	SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 10, BOOKE_PAGESZ_4K, 1),
diff --git a/board/freescale/p1010rdb/tlb.c b/board/freescale/p1010rdb/tlb.c
index a7af0f67566..a3d36b35d56 100644
--- a/board/freescale/p1010rdb/tlb.c
+++ b/board/freescale/p1010rdb/tlb.c
@@ -30,7 +30,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_4K, 1),
-#ifdef CONFIG_SPL_NAND_MINIMAL
+#ifdef CONFIG_SPL_NAND_BOOT
 	SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 10, BOOKE_PAGESZ_4K, 1),
diff --git a/board/freescale/t1040qds/t1040_pbi.cfg b/board/freescale/t1040qds/t1040_pbi.cfg
index 624398a25df..10b1a6d179f 100644
--- a/board/freescale/t1040qds/t1040_pbi.cfg
+++ b/board/freescale/t1040qds/t1040_pbi.cfg
@@ -3,7 +3,7 @@
 09010000 00200400
 09138000 00000000
 091380c0 00000100
-#Configure CPC1 as 512KB SRAM
+#Configure CPC1 as 256KB SRAM
 09010100 00000000
 09010104 fffc0007
 09010f00 08000000
diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c
index 2aa176c7a29..de3ea5c2aa2 100644
--- a/board/freescale/t1040qds/t1040qds.c
+++ b/board/freescale/t1040qds/t1040qds.c
@@ -239,3 +239,8 @@ void qixis_dump_switch(void)
 		printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
 	}
 }
+
+int board_need_mem_reset(void)
+{
+	return 1;
+}
diff --git a/boards.cfg b/boards.cfg
index 8951bb18eca..18faf09a15f 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -965,6 +965,7 @@ Active  powerpc     mpc85xx        -           freescale       t4qds
 Active  powerpc     mpc85xx        -           freescale       t4qds               T4160QDS_SPIFLASH                    T4240QDS:PPC_T4160,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000                                                                  -
 Active  powerpc     mpc85xx        -           freescale       t4qds               T4240EMU                             T4240EMU:PPC_T4240                                                                                                                York Sun <yorksun@freescale.com>
 Active  powerpc     mpc85xx        -           freescale       t4qds               T4240QDS                             T4240QDS:PPC_T4240                                                                                                                -
+Active  powerpc     mpc85xx        -           freescale       t4qds               T4240QDS_NAND	                T4240QDS:PPC_T4240,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000                                                                      -
 Active  powerpc     mpc85xx        -           freescale       t4qds               T4240QDS_SDCARD                      T4240QDS:PPC_T4240,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000                                                                    -
 Active  powerpc     mpc85xx        -           freescale       t4qds               T4240QDS_SPIFLASH                    T4240QDS:PPC_T4240,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000                                                                  -
 Active  powerpc     mpc85xx        -           freescale       t4qds               T4240QDS_SRIO_PCIE_BOOT              T4240QDS:PPC_T4240,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000                                                                  -
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index 3c6cd61342d..c182158be4a 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -289,6 +289,8 @@ unsigned long get_board_ddr_clk(void);
 
 /* NAND Flash on IFC */
 #define CONFIG_NAND_FSL_IFC
+#define CONFIG_SYS_NAND_MAX_ECCPOS	256
+#define CONFIG_SYS_NAND_MAX_OOBFREE	2
 #define CONFIG_SYS_NAND_BASE		0xff800000
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_NAND_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_NAND_BASE)
diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index 4aed5afa379..584aba8d0e4 100644
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -29,7 +29,7 @@
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index f025e3197ba..6170cbc81f9 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -38,7 +38,7 @@
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 
diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index 4a5fc864a65..0bb22be9f3c 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -149,6 +149,9 @@
 #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
 #define CONFIG_SYS_NAND_QUIET          1
 
+#define CONFIG_SYS_NAND_MAX_OOBFREE	2
+#define CONFIG_SYS_NAND_MAX_ECCPOS	48
+
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index fe5309a227f..ea5cb6501b6 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -37,7 +37,7 @@
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index ba43ccec60f..934a6cb7a6a 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -75,6 +75,8 @@
 #endif
 
 #define CONFIG_NAND_FSL_ELBC
+#define CONFIG_SYS_NAND_MAX_ECCPOS	56
+#define CONFIG_SYS_NAND_MAX_OOBFREE	5
 
 #ifdef CONFIG_NAND
 #define CONFIG_SPL
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index d0ebd6aba8b..7d0bc043f99 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -233,6 +233,7 @@ unsigned long get_board_ddr_clk(void);
 #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
 #define QIXIS_RCFG_CTL_RECONFIG_START	0x21
 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
+#define	QIXIS_RST_FORCE_MEM		0x01
 
 #define CONFIG_SYS_CSPR3_EXT	(0xf)
 #define CONFIG_SYS_CSPR3	(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
@@ -248,7 +249,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_CS3_FTIM1		(FTIM1_GPCM_TACO(0xff) | \
 					FTIM1_GPCM_TRAD(0x3f))
 #define CONFIG_SYS_CS3_FTIM2		(FTIM2_GPCM_TCS(0x0e) | \
-					FTIM2_GPCM_TCH(0x0) | \
+					FTIM2_GPCM_TCH(0x8) | \
 					FTIM2_GPCM_TWP(0x1f))
 #define CONFIG_SYS_CS3_FTIM3		0x0