ARM: uniphier: create early page table at run-time

UniPhier SoCs are not equipped with dedicated on-chip SRAM.  Instead,
locked outer cache is used as RAM area during the early boot stage
where DRAM is not ready yet.  This effectively means MMU must be
always enabled while we are in SPL.

Currently, the SPL image for UniPhier SoCs contains the page table
statically defined at compile time.  It has been a burden because the
16KB page table occupies a quarter memory footprint of the 64KB SPL
image.

Finally, there is no more room to implement new features in SPL.
Setting aside the NOR boot mode, this issue can be solved by creating
the page table onto RAM at run time.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

3 files changed, 94 insertions, 38 deletions

diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile
index ea3ae5425e7..491e78e415e 100644
--- a/arch/arm/mach-uniphier/Makefile
+++ b/arch/arm/mach-uniphier/Makefile
@@ -5,7 +5,6 @@
 ifdef CONFIG_SPL_BUILD
 
 obj-y += lowlevel_init.o
-obj-y += init_page_table.o
 
 obj-y += init/ bcu/ memconf/ pll/ early-clk/ early-pinctrl/ dram/
 obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc/
diff --git a/arch/arm/mach-uniphier/init_page_table.S b/arch/arm/mach-uniphier/init_page_table.S
deleted file mode 100644
index 4ed2656ee97..00000000000
--- a/arch/arm/mach-uniphier/init_page_table.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-#include <linux/linkage.h>
-
-/* page table */
-#define NR_SECTIONS	4096
-#define SECTION_SHIFT	20
-#define DEVICE	0x00002002 /* Non-shareable Device */
-#define NORMAL	0x0000000e /* Normal Memory Write-Back, No Write-Allocate */
-
-	.section ".rodata"
-	.align 14
-ENTRY(init_page_table)
-	section = 0
-	.rept NR_SECTIONS
-	.if section == 0 || section == 1
-	attr = NORMAL
-	.else
-	attr = DEVICE
-	.endif
-	.word (section << SECTION_SHIFT) | attr
-	section = section + 1
-	.endr
-END(init_page_table)
diff --git a/arch/arm/mach-uniphier/lowlevel_init.S b/arch/arm/mach-uniphier/lowlevel_init.S
index 291337070e6..dd03ad8143d 100644
--- a/arch/arm/mach-uniphier/lowlevel_init.S
+++ b/arch/arm/mach-uniphier/lowlevel_init.S
@@ -29,12 +29,16 @@ ENTRY(lowlevel_init)
 	bl	debug_ll_init
 #endif
 
+	bl	setup_init_ram		@ RAM area for stack and page talbe
+
 	/*
 	 * Now we are using the page table embedded in the Boot ROM.
 	 * It is not handy since it is not a straight mapped table for sLD3.
-	 * What we need to do next is to switch over to the page table in SPL.
+	 * Also, the access to the external bus is prohibited.  What we need
+	 * to do next is to create a page table and switch over to it.
 	 */
-	ldr	r3, =init_page_table	@ page table must be 16KB aligned
+	bl	create_page_table
+	bl	v7_flush_dcache_all
 
 	/* Disable MMU and Dcache before switching Page Table */
 	mrc	p15, 0, r0, c1, c0, 0	@ SCTLR (System Control Register)
@@ -43,8 +47,6 @@ ENTRY(lowlevel_init)
 
 	bl	enable_mmu
 
-	bl	setup_init_ram		@ RAM area for temporary stack pointer
-
 	mov	lr, r8			@ restore link
 	mov	pc, lr			@ back to my caller
 ENDPROC(lowlevel_init)
@@ -55,7 +57,7 @@ ENTRY(enable_mmu)
 	orr	r0, r0, #0x20		@ disable TTBR1
 	mcr	p15, 0, r0, c2, c0, 2
 
-	orr	r0, r3, #0x8		@ Outer Cacheability for table walks: WBWA
+	orr	r0, r12, #0x8		@ Outer Cacheability for table walks: WBWA
 	mcr	p15, 0, r0, c2, c0, 0   @ TTBR0
 
 	mov	r0, #0
@@ -82,8 +84,9 @@ ENDPROC(enable_mmu)
  * For PH1-Pro4 or older SoCs, the size of WAY is 32KB.
  * It is large enough for tmp RAM.
  */
-#define BOOT_RAM_SIZE    (SZ_32K)
-#define BOOT_WAY_BITS    (0x00000100)   /* way 8 */
+#define BOOT_RAM_SIZE	(SZ_32K)
+#define BOOT_RAM_BASE	((CONFIG_SPL_STACK) - (BOOT_RAM_SIZE))
+#define BOOT_WAY_BITS	(0x00000100)   /* way 8 */
 
 ENTRY(setup_init_ram)
 	/*
@@ -96,7 +99,7 @@ ENTRY(setup_init_ram)
 	ldr	r0, = 0x00408006	@ touch to zero with address range
 	ldr	r1, = SSCOQM
 	str	r0, [r1]
-	ldr	r0, = (CONFIG_SPL_STACK - BOOT_RAM_SIZE)	@ base address
+	ldr	r0, = BOOT_RAM_BASE
 	ldr	r1, = SSCOQAD
 	str	r0, [r1]
 	ldr	r0, = BOOT_RAM_SIZE
@@ -119,3 +122,86 @@ ENTRY(setup_init_ram)
 
 	mov	pc, lr
 ENDPROC(setup_init_ram)
+
+#define DEVICE	0x00002002 /* Non-shareable Device */
+#define NORMAL	0x0000000e /* Normal Memory Write-Back, No Write-Allocate */
+
+ENTRY(create_page_table)
+	ldr	r0, = DEVICE
+	ldr	r1, = BOOT_RAM_BASE
+	mov	r12, r1			@ r12 is preserved during D-cache flush
+0:	str	r0, [r1], #4		@ specify all the sections as Device
+	adds	r0, r0, #0x00100000
+	bcc	0b
+
+	ldr	r0, = NORMAL
+	str	r0, [r12]		@ mark the first section as Normal
+	add	r0, r0, #0x00100000
+	str	r0, [r12, #4]		@ mark the second section as Normal
+	mov	pc, lr
+ENDPROC(create_page_table)
+
+/* We don't use Thumb instructions for now */
+#define ARM(x...)	x
+#define THUMB(x...)
+
+/*
+ *	v7_flush_dcache_all()
+ *
+ *	Flush the whole D-cache.
+ *
+ *	Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
+ *
+ *	- mm    - mm_struct describing address space
+ *
+ *	Note: copied from arch/arm/mm/cache-v7.S of Linux 4.4
+ */
+ENTRY(v7_flush_dcache_all)
+	dmb					@ ensure ordering with previous memory accesses
+	mrc	p15, 1, r0, c0, c0, 1		@ read clidr
+	mov	r3, r0, lsr #23			@ move LoC into position
+	ands	r3, r3, #7 << 1			@ extract LoC*2 from clidr
+	beq	finished			@ if loc is 0, then no need to clean
+start_flush_levels:
+	mov	r10, #0				@ start clean at cache level 0
+flush_levels:
+	add	r2, r10, r10, lsr #1		@ work out 3x current cache level
+	mov	r1, r0, lsr r2			@ extract cache type bits from clidr
+	and	r1, r1, #7			@ mask of the bits for current cache only
+	cmp	r1, #2				@ see what cache we have at this level
+	blt	skip				@ skip if no cache, or just i-cache
+	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
+	isb					@ isb to sych the new cssr&csidr
+	mrc	p15, 1, r1, c0, c0, 0		@ read the new csidr
+	and	r2, r1, #7			@ extract the length of the cache lines
+	add	r2, r2, #4			@ add 4 (line length offset)
+	movw	r4, #0x3ff
+	ands	r4, r4, r1, lsr #3		@ find maximum number on the way size
+	clz	r5, r4				@ find bit position of way size increment
+	movw	r7, #0x7fff
+	ands	r7, r7, r1, lsr #13		@ extract max number of the index size
+loop1:
+	mov	r9, r7				@ create working copy of max index
+loop2:
+ ARM(	orr	r11, r10, r4, lsl r5	)	@ factor way and cache number into r11
+ THUMB(	lsl	r6, r4, r5		)
+ THUMB(	orr	r11, r10, r6		)	@ factor way and cache number into r11
+ ARM(	orr	r11, r11, r9, lsl r2	)	@ factor index number into r11
+ THUMB(	lsl	r6, r9, r2		)
+ THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
+	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
+	subs	r9, r9, #1			@ decrement the index
+	bge	loop2
+	subs	r4, r4, #1			@ decrement the way
+	bge	loop1
+skip:
+	add	r10, r10, #2			@ increment cache number
+	cmp	r3, r10
+	bgt	flush_levels
+finished:
+	mov	r10, #0				@ swith back to cache level 0
+	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
+	dsb	st
+	isb
+	mov	pc, lr
+ENDPROC(v7_flush_dcache_all)