Prepare for SoC rework of ARM code:

- rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL - rename memsetup into lowlevel_init (function name and source files)
author: wdenk <wdenk> 2005-04-02 23:52:25 +0000
committer: wdenk <wdenk> 2005-04-02 23:52:25 +0000
commit: 400558b561e2bdb47f87b96b3510dda0881a3662 (patch)
tree: 479fa3918e0031a95cdac9468cb8396e1f1a9b60
parent: 414eec35e3832f4f9ce8a25ace7ead638be1f76f (diff)
115 files changed, 208 insertions, 210 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 5ccee97257b..1136f11f7ac 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,10 @@
 Changes for U-Boot 1.1.3:
 ======================================================================
 
+* Prepare for SoC rework of ARM code:
+  - rename CONFIG_BOOTBINFUNC into  CONFIG_INIT_CRITICAL
+  - rename memsetup into lowlevel_init (function name and source files)
+
 * Fix problems with SNTP support;
   enable SNTP support in some boards.
 
diff --git a/README b/README
index a9c052c0592..6cc7405512e 100644
--- a/README
+++ b/README
@@ -2128,6 +2128,15 @@ Low Level (hardware related) configuration options:
 		This only takes effect if the memory commands are activated
 		globally (CFG_CMD_MEM).
 
+- CONFIG_INIT_CRITICAL
+                [ARM only] If this variable is NOT defined, then
+                certain critical initializations (like setting up the
+                memory controller) are omitted. Normally this
+                variable MUST be defined for all boards. The only
+                exception is when U-Boot is loaded (to RAM) by some
+                other boot loader or by a debugger which performs
+                these intializations itself.
+
 Building the Software:
 ======================
 
diff --git a/board/assabet/setup.S b/board/assabet/setup.S
index fefb431af20..56ea0dd9284 100644
--- a/board/assabet/setup.S
+++ b/board/assabet/setup.S
@@ -80,8 +80,8 @@ BCR_DB1110:	.long	ASSABET_BCR_DB1110
 LEDS:		.long	NEPONSET_LEDS
 
 
-	.globl memsetup
-memsetup:
+	.globl lowlevel_init
+lowlevel_init:
 
 	/* Setting up the memory and stuff */
 
diff --git a/board/cerf250/Makefile b/board/cerf250/Makefile
index 3ab97dfdc0c..83e3ba458ad 100644
--- a/board/cerf250/Makefile
+++ b/board/cerf250/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= cerf250.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/cerf250/memsetup.S b/board/cerf250/lowlevel_init.S
index f3d373a8a24..c9b68d7ff39 100644
--- a/board/cerf250/memsetup.S
+++ b/board/cerf250/lowlevel_init.S
@@ -3,7 +3,7 @@
  *
  * NOTE: I haven't clean this up considerably, just enough to get it
  * running. See hal_platform_setup.h for the source. See
- * board/cradle/memsetup.S for another PXA250 setup that is
+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
  * much cleaner.
  *
  * See file CREDITS for list of people who contributed to this
@@ -43,8 +43,8 @@ DRAM_SIZE:  .long   CFG_DRAM_SIZE
  * 	Memory setup
  */
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 
 	/* Set up GPIO pins first ----------------------------------------- */
 
@@ -403,9 +403,9 @@ initclks:
 #endif
 
 	/* ---------------------------------------------------------------- */
-	/* End memsetup                                                     */
+	/* End lowlevel_init                                                     */
 	/* ---------------------------------------------------------------- */
 
-endmemsetup:
+endlowlevel_init:
 
     mov     pc,	lr
diff --git a/board/cradle/Makefile b/board/cradle/Makefile
index 5a321eb3939..265d50043ca 100644
--- a/board/cradle/Makefile
+++ b/board/cradle/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= cradle.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/cradle/memsetup.S b/board/cradle/lowlevel_init.S
index 8800cb0cb72..2fd307f1d0e 100644
--- a/board/cradle/memsetup.S
+++ b/board/cradle/lowlevel_init.S
@@ -43,8 +43,8 @@ DRAM_SIZE:  .long   CFG_DRAM_SIZE
    .endm
 
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 
     mov      r10, lr
 
@@ -512,4 +512,4 @@ mem_init:
 
    mov   pc, r10
 
-@ End memsetup
+@ End lowlevel_init
diff --git a/board/csb226/Makefile b/board/csb226/Makefile
index ac94642453d..5b311a9450d 100644
--- a/board/csb226/Makefile
+++ b/board/csb226/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= csb226.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/logodl/memsetup.S b/board/csb226/lowlevel_init.S
index 68577ca0699..aa9dcba6fc4 100644
--- a/board/logodl/memsetup.S
+++ b/board/csb226/lowlevel_init.S
@@ -3,7 +3,7 @@
  *
  * NOTE: I haven't clean this up considerably, just enough to get it
  * running. See hal_platform_setup.h for the source. See
- * board/cradle/memsetup.S for another PXA250 setup that is
+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
  * much cleaner.
  *
  * See file CREDITS for list of people who contributed to this
@@ -46,8 +46,8 @@ _TEXT_BASE:
  * 	Memory setup
  */
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 
     mov      r10, lr
 
@@ -429,9 +429,9 @@ initclks:
 #endif
 
 	/* ---------------------------------------------------------------- */
-	/* End memsetup                                                     */
+	/* End lowlevel_init                                                     */
 	/* ---------------------------------------------------------------- */
 
-endmemsetup:
+endlowlevel_init:
 
     mov     pc, lr
diff --git a/board/dave/B2/Makefile b/board/dave/B2/Makefile
index c0c3f6785b4..548fd528ba1 100644
--- a/board/dave/B2/Makefile
+++ b/board/dave/B2/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= B2.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/dave/B2/memsetup.S b/board/dave/B2/lowlevel_init.S
index 3f64cb3749b..2f3a3645ed6 100644
--- a/board/dave/B2/memsetup.S
+++ b/board/dave/B2/lowlevel_init.S
@@ -149,8 +149,8 @@ MEMORY_CONFIG:
   .word 0x20      /*MRSR7*/
 
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 
 	/*
 		the next instruction fail due memory relocation...
diff --git a/board/dbau1x00/Makefile b/board/dbau1x00/Makefile
index d1cdc6b9244..d9b0e2d258a 100644
--- a/board/dbau1x00/Makefile
+++ b/board/dbau1x00/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	= $(BOARD).o flash.o
-SOBJS	= memsetup.o
+SOBJS	= lowlevel_init.o
 
 $(LIB):	.depend $(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/dbau1x00/memsetup.S b/board/dbau1x00/lowlevel_init.S
index c96d8a50996..7afd5840c86 100644
--- a/board/dbau1x00/memsetup.S
+++ b/board/dbau1x00/lowlevel_init.S
@@ -16,8 +16,8 @@
 	.set noreorder
 	.set mips32
 
-	.globl	memsetup
-memsetup:
+	.globl	lowlevel_init
+lowlevel_init:
 	/*
 	 * Step 1) Establish CPU endian mode.
 	 * Db1500-specific:
diff --git a/board/dnp1110/Makefile b/board/dnp1110/Makefile
index 31ef6954cdc..eaa38bc3c13 100644
--- a/board/dnp1110/Makefile
+++ b/board/dnp1110/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= dnp1110.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/dnp1110/memsetup.S b/board/dnp1110/lowlevel_init.S
index 1622aea5044..7730be34379 100644
--- a/board/dnp1110/memsetup.S
+++ b/board/dnp1110/lowlevel_init.S
@@ -63,8 +63,8 @@ smcnfg:		.long	0x00000000
 
 /* setting up the memory */
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 
 	ldr	r0, MEM_BASE
 
diff --git a/board/ep7312/Makefile b/board/ep7312/Makefile
index 2b4c975b8e8..c53a3c7a0d6 100644
--- a/board/ep7312/Makefile
+++ b/board/ep7312/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= ep7312.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/ep7312/memsetup.S b/board/ep7312/lowlevel_init.S
index 6078937b4cd..5dadb313b1b 100644
--- a/board/ep7312/memsetup.S
+++ b/board/ep7312/lowlevel_init.S
@@ -45,8 +45,8 @@ sdrfpr_val:	.long	0x00000240
 sdconf_val:	.long	0x00000522
 /* setting up the memory */
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 	/*
 	 * SYSCON1-3
 	 */
diff --git a/board/evb4510/Makefile b/board/evb4510/Makefile
index 1ab4dfb368c..10850a95e47 100644
--- a/board/evb4510/Makefile
+++ b/board/evb4510/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= evb4510.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $^
diff --git a/board/evb4510/memsetup.S b/board/evb4510/lowlevel_init.S
index 915af1e9e60..7184d7259a5 100644
--- a/board/evb4510/memsetup.S
+++ b/board/evb4510/lowlevel_init.S
@@ -31,7 +31,7 @@
  *
  * This memory map allows us to relocate from FLASH to SRAM.  After
  * power-on reset the CPU only knows about the FLASH memory at address
- * 0x00000000.	After memsetup completes the memory map will be:
+ * 0x00000000.	After lowlevel_init completes the memory map will be:
  *
  * Memory Addr
  * 0x00000000
@@ -54,8 +54,8 @@
  *
  ***********************************************************************/
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 
 	/* preserve the temp register (r12 AKA ip) and remap it. */
 	ldr r1, =SRAM_BASE+0xC
diff --git a/board/gcplus/Makefile b/board/gcplus/Makefile
index d0f7d1cffaf..1954d661c3d 100644
--- a/board/gcplus/Makefile
+++ b/board/gcplus/Makefile
@@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= gcplus.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/gcplus/memsetup.S b/board/gcplus/lowlevel_init.S
index 02f56858244..f292c4d28ab 100644
--- a/board/gcplus/memsetup.S
+++ b/board/gcplus/lowlevel_init.S
@@ -29,11 +29,11 @@
 #include "version.h"
 
 
-	.globl	memsetup
-memsetup:
+	.globl	lowlevel_init
+lowlevel_init:
 	/* The ADS GC+ for Linux Boot Rom Ver. 1.73 does memory init for us.
 	 * However the darn thing leaves the MMU enabled before handing control
-	 * over to us. So we need to disable the MMU and we use memsetup
+	 * over to us. So we need to disable the MMU and we use lowlevel_init
 	 * to do it.
 	 */
 
diff --git a/board/impa7/Makefile b/board/impa7/Makefile
index f8323e0b97f..08543f94f22 100644
--- a/board/impa7/Makefile
+++ b/board/impa7/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= impa7.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/impa7/memsetup.S b/board/impa7/lowlevel_init.S
index 5cb5fa899d2..7ce10a20195 100644
--- a/board/impa7/memsetup.S
+++ b/board/impa7/lowlevel_init.S
@@ -39,8 +39,8 @@ memcfg2_val:	.long	0x00000000 @ upper 16 bits are reserved for CS7 + CS6
 drfpr_val:	.long	0x00000081
 /* setting up the memory */
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 	/*
 	 * DRFPR
 	 * 64kHz DRAM refresh
diff --git a/board/incaip/Makefile b/board/incaip/Makefile
index d1cdc6b9244..d9b0e2d258a 100644
--- a/board/incaip/Makefile
+++ b/board/incaip/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	= $(BOARD).o flash.o
-SOBJS	= memsetup.o
+SOBJS	= lowlevel_init.o
 
 $(LIB):	.depend $(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/incaip/memsetup.S b/board/incaip/lowlevel_init.S
index 3f883c110a0..fb64ef419de 100644
--- a/board/incaip/memsetup.S
+++ b/board/incaip/lowlevel_init.S
@@ -269,9 +269,9 @@ sdram_init:
 	.end	sdram_init
 
 
-	.globl	memsetup
-	.ent	memsetup
-memsetup:
+	.globl	lowlevel_init
+	.ent	lowlevel_init
+lowlevel_init:
 
 	/* EBU, CGU and SDRAM Initialization.
 	 */
@@ -292,4 +292,4 @@ memsetup:
 	j	ra
 	nop
 
-	.end	memsetup
+	.end	lowlevel_init
diff --git a/board/innokom/Makefile b/board/innokom/Makefile
index 59eaee58b1c..73f6a744279 100644
--- a/board/innokom/Makefile
+++ b/board/innokom/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= innokom.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/csb226/memsetup.S b/board/innokom/lowlevel_init.S
index 68577ca0699..aa9dcba6fc4 100644
--- a/board/csb226/memsetup.S
+++ b/board/innokom/lowlevel_init.S
@@ -3,7 +3,7 @@
  *
  * NOTE: I haven't clean this up considerably, just enough to get it
  * running. See hal_platform_setup.h for the source. See
- * board/cradle/memsetup.S for another PXA250 setup that is
+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
  * much cleaner.
  *
  * See file CREDITS for list of people who contributed to this
@@ -46,8 +46,8 @@ _TEXT_BASE:
  * 	Memory setup
  */
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 
     mov      r10, lr
 
@@ -429,9 +429,9 @@ initclks:
 #endif
 
 	/* ---------------------------------------------------------------- */
-	/* End memsetup                                                     */
+	/* End lowlevel_init                                                     */
 	/* ---------------------------------------------------------------- */
 
-endmemsetup:
+endlowlevel_init:
 
     mov     pc, lr
diff --git a/board/lart/Makefile b/board/lart/Makefile
index 42ceb03b7af..550aa1dac3b 100644
--- a/board/lart/Makefile
+++ b/board/lart/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= lart.o flash.o
-SOBJS	:= flashasm.o memsetup.o
+SOBJS	:= flashasm.o lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/lart/memsetup.S b/board/lart/lowlevel_init.S
index 635f2a001a5..db9fd63defc 100644
--- a/board/lart/memsetup.S
+++ b/board/lart/lowlevel_init.S
@@ -53,8 +53,8 @@ mecr:		.long	0x00060006
 
 /* setting up the memory */
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 	ldr	r0, MEM_BASE
 
 	/* Setup the flash memory */
diff --git a/board/logodl/Makefile b/board/logodl/Makefile
index b635322a810..c7cde7d5790 100644
--- a/board/logodl/Makefile
+++ b/board/logodl/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= logodl.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $^
diff --git a/board/innokom/memsetup.S b/board/logodl/lowlevel_init.S
index 68577ca0699..aa9dcba6fc4 100644
--- a/board/innokom/memsetup.S
+++ b/board/logodl/lowlevel_init.S
@@ -3,7 +3,7 @@
  *
  * NOTE: I haven't clean this up considerably, just enough to get it
  * running. See hal_platform_setup.h for the source. See
- * board/cradle/memsetup.S for another PXA250 setup that is
+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
  * much cleaner.
  *
  * See file CREDITS for list of people who contributed to this
@@ -46,8 +46,8 @@ _TEXT_BASE:
  * 	Memory setup
  */
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 
     mov      r10, lr
 
@@ -429,9 +429,9 @@ initclks:
 #endif
 
 	/* ---------------------------------------------------------------- */
-	/* End memsetup                                                     */
+	/* End lowlevel_init                                                     */
 	/* ---------------------------------------------------------------- */
 
-endmemsetup:
+endlowlevel_init:
 
     mov     pc, lr
diff --git a/board/lpd7a40x/Makefile b/board/lpd7a40x/Makefile
index f0999d17381..ebe14df1b61 100644
--- a/board/lpd7a40x/Makefile
+++ b/board/lpd7a40x/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= lpd7a40x.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/lpd7a40x/memsetup.S b/board/lpd7a40x/lowlevel_init.S
index d4e6c6a0e1d..b3ed55ce35e 100644
--- a/board/lpd7a40x/memsetup.S
+++ b/board/lpd7a40x/lowlevel_init.S
@@ -131,8 +131,8 @@
 _TEXT_BASE:
 	.word	TEXT_BASE
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 	mov	r9, lr	@ save return address
 
 	/* memory control configuration */
diff --git a/board/lubbock/Makefile b/board/lubbock/Makefile
index 0e29e7be7aa..106622cf587 100644
--- a/board/lubbock/Makefile
+++ b/board/lubbock/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= lubbock.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/lubbock/memsetup.S b/board/lubbock/lowlevel_init.S
index dc0b7be024b..15276e89d01 100644
--- a/board/lubbock/memsetup.S
+++ b/board/lubbock/lowlevel_init.S
@@ -3,7 +3,7 @@
  *
  * NOTE: I haven't clean this up considerably, just enough to get it
  * running. See hal_platform_setup.h for the source. See
- * board/cradle/memsetup.S for another PXA250 setup that is
+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
  * much cleaner.
  *
  * See file CREDITS for list of people who contributed to this
@@ -43,8 +43,8 @@ DRAM_SIZE:  .long   CFG_DRAM_SIZE
  * 	Memory setup
  */
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 
     mov      r10, lr
 
@@ -403,9 +403,9 @@ initclks:
 #endif
 
 	/* ---------------------------------------------------------------- */
-	/* End memsetup                                                     */
+	/* End lowlevel_init                                                     */
 	/* ---------------------------------------------------------------- */
 
-endmemsetup:
+endlowlevel_init:
 
     mov     pc, lr
diff --git a/board/modnet50/Makefile b/board/modnet50/Makefile
index 7dbcc1c9378..ab2c376ff46 100644
--- a/board/modnet50/Makefile
+++ b/board/modnet50/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= modnet50.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $^
diff --git a/board/modnet50/memsetup.S b/board/modnet50/lowlevel_init.S
index 674b1d2e058..c98c1554582 100644
--- a/board/modnet50/memsetup.S
+++ b/board/modnet50/lowlevel_init.S
@@ -51,8 +51,8 @@
 #define NETARM_MMAP_CS4_MASK	(~(PHYS_EXT_SIZE - 1))
 
 /* setting up the memory */
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 
 #if defined(CONFIG_MODNET50)
 	ldr	pc, =(_jump_to_high + NETARM_MMAP_CS0_BASE - TEXT_BASE)
@@ -187,7 +187,7 @@ memsetup_cs3:
 #endif /* CONFIG_MODNET50 */
 
 
-memsetup_end:
+lowlevel_init_end:
 	/*
 	 * manipulate address in lr and ip to match new
 	 * address space
diff --git a/board/mpl/vcma9/Makefile b/board/mpl/vcma9/Makefile
index f9b78f947d9..304c965d12b 100644
--- a/board/mpl/vcma9/Makefile
+++ b/board/mpl/vcma9/Makefile
@@ -28,7 +28,7 @@ LIB	= lib$(BOARD).a
 OBJS	:= vcma9.o flash.o cmd_vcma9.o
 OBJS	+= ../common/common_util.o ../common/memtst.o
 
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/mpl/vcma9/memsetup.S b/board/mpl/vcma9/lowlevel_init.S
index 98aec3db4df..a02335314bb 100644
--- a/board/mpl/vcma9/memsetup.S
+++ b/board/mpl/vcma9/lowlevel_init.S
@@ -130,8 +130,8 @@
 _TEXT_BASE:
 	.word	TEXT_BASE
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 	/* memory control configuration */
 	/* make r0 relative the current location so that it */
 	/* reads SMRDATA out of FLASH rather than memory ! */
diff --git a/board/mx1ads/Makefile b/board/mx1ads/Makefile
index 72f850d9cec..3e805feb404 100644
--- a/board/mx1ads/Makefile
+++ b/board/mx1ads/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= mx1ads.o syncflash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/mx1ads/memsetup.S b/board/mx1ads/lowlevel_init.S
index 1b06fa3c4d4..09c260d64dc 100644
--- a/board/mx1ads/memsetup.S
+++ b/board/mx1ads/lowlevel_init.S
@@ -1,5 +1,5 @@
 /*
- * board/mx1ads/memsetup.S
+ * board/mx1ads/lowlevel_init.S
  *
  * (c) Copyright 2004
  * Techware Information Technology, Inc.
@@ -33,8 +33,8 @@
 _TEXT_BASE:
 	.word	TEXT_BASE
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 /* memory controller init	 	*/
 
 	ldr  r1, =SDCTL0
diff --git a/board/mx1fs2/Makefile b/board/mx1fs2/Makefile
index 86aef5c3da8..9e3bca14cd9 100644
--- a/board/mx1fs2/Makefile
+++ b/board/mx1fs2/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= mx1fs2.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $^
diff --git a/board/mx1fs2/memsetup.S b/board/mx1fs2/lowlevel_init.S
index 5ec751b73dd..8211beb3f88 100644
--- a/board/mx1fs2/memsetup.S
+++ b/board/mx1fs2/lowlevel_init.S
@@ -22,8 +22,8 @@
 #include <version.h>
 #include <asm/arch/imx-regs.h>
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 
 	mov	r10, lr
 
diff --git a/board/pleb2/Makefile b/board/pleb2/Makefile
index 5fdc874dfe2..95d9170b240 100644
--- a/board/pleb2/Makefile
+++ b/board/pleb2/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= pleb2.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/pleb2/memsetup.S b/board/pleb2/lowlevel_init.S
index f2e1ce9d431..add2c531ab2 100644
--- a/board/pleb2/memsetup.S
+++ b/board/pleb2/lowlevel_init.S
@@ -33,8 +33,8 @@ DRAM_SIZE:  .long   CFG_DRAM_SIZE
 	sub	pc,pc,#4
 	.endm
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 
 	mov	r10, lr
 
@@ -485,4 +485,4 @@ mem_init:
 
 	mov	pc, r10
 
-@ End memsetup
+@ End lowlevel_init
diff --git a/board/purple/Makefile b/board/purple/Makefile
index a9463b62157..b2f2fc0fd35 100644
--- a/board/purple/Makefile
+++ b/board/purple/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	= $(BOARD).o flash.o sconsole.o
-SOBJS	= memsetup.o
+SOBJS	= lowlevel_init.o
 
 $(LIB):	.depend $(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/purple/memsetup.S b/board/purple/lowlevel_init.S
index d532ceba827..668124a784d 100644
--- a/board/purple/memsetup.S
+++ b/board/purple/lowlevel_init.S
@@ -28,8 +28,8 @@
 
 #define MC_IOGP	0xBF800800
 
-	.globl	memsetup
-memsetup:
+	.globl	lowlevel_init
+lowlevel_init:
 	li	t0, MC_IOGP
 	li	t1, 0xf24
 	sw	t1, 0(t0)
diff --git a/board/purple/u-boot.lds b/board/purple/u-boot.lds
index 6263dd00529..aeea5d475e4 100644
--- a/board/purple/u-boot.lds
+++ b/board/purple/u-boot.lds
@@ -35,7 +35,7 @@ SECTIONS
 	.text       :
 	{
 	  cpu/mips/start.o		(.text)
-	  board/purple/memsetup.o	(.text)
+	  board/purple/lowlevel_init.o	(.text)
 	  cpu/mips/cache.o		(.text)
 	  common/main.o			(.text)
 	  common/dlmalloc.o		(.text)
diff --git a/board/scb9328/Makefile b/board/scb9328/Makefile
index 212efcc4e55..5dc3fd4e476 100644
--- a/board/scb9328/Makefile
+++ b/board/scb9328/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= scb9328.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $^
diff --git a/board/scb9328/memsetup.S b/board/scb9328/lowlevel_init.S
index be5650a45f7..ba3b6d24183 100644
--- a/board/scb9328/memsetup.S
+++ b/board/scb9328/lowlevel_init.S
@@ -22,8 +22,8 @@
 #include <version.h>
 #include <asm/arch/imx-regs.h>
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 
 	mov	r10, lr
 
diff --git a/board/shannon/Makefile b/board/shannon/Makefile
index 86098a3053a..f66b096a4f7 100644
--- a/board/shannon/Makefile
+++ b/board/shannon/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= shannon.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/shannon/memsetup.S b/board/shannon/lowlevel_init.S
index a9a8777d372..0655c42d3be 100644
--- a/board/shannon/memsetup.S
+++ b/board/shannon/lowlevel_init.S
@@ -51,8 +51,8 @@ mecr:		.long	0x7fff7fff @ 01000000
 
 /* setting up the memory */
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 	ldr	r0, MEM_BASE
 
 	/* Setup the flash memory */
diff --git a/board/smdk2400/Makefile b/board/smdk2400/Makefile
index 367eabddbfe..fc3d48faeea 100644
--- a/board/smdk2400/Makefile
+++ b/board/smdk2400/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= smdk2400.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/smdk2400/memsetup.S b/board/smdk2400/lowlevel_init.S
index b507d812595..a5de806af55 100644
--- a/board/smdk2400/memsetup.S
+++ b/board/smdk2400/lowlevel_init.S
@@ -125,8 +125,8 @@
 _TEXT_BASE:
 	.word	TEXT_BASE
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 	/* memory control configuration */
 	/* make r0 relative the current location so that it */
 	/* reads SMRDATA out of FLASH rather than memory ! */
diff --git a/board/smdk2410/Makefile b/board/smdk2410/Makefile
index af1e6e677e8..4ee21f5977a 100644
--- a/board/smdk2410/Makefile
+++ b/board/smdk2410/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= smdk2410.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/smdk2410/memsetup.S b/board/smdk2410/lowlevel_init.S
index c00e772ff89..310f2a0a94a 100644
--- a/board/smdk2410/memsetup.S
+++ b/board/smdk2410/lowlevel_init.S
@@ -129,8 +129,8 @@
 _TEXT_BASE:
 	.word	TEXT_BASE
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 	/* memory control configuration */
 	/* make r0 relative the current location so that it */
 	/* reads SMRDATA out of FLASH rather than memory ! */
diff --git a/board/tb0229/Makefile b/board/tb0229/Makefile
index e7bb8cbe50d..4375073af9b 100644
--- a/board/tb0229/Makefile
+++ b/board/tb0229/Makefile
@@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	= $(BOARD).o flash.o vr4131-pci.o
-SOBJS	= memsetup.o
+SOBJS	= lowlevel_init.o
 
 $(LIB):	.depend $(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/tb0229/memsetup.S b/board/tb0229/lowlevel_init.S
index 0eaf45dd59f..df318067b93 100644
--- a/board/tb0229/memsetup.S
+++ b/board/tb0229/lowlevel_init.S
@@ -14,8 +14,8 @@
 #include <asm/regdef.h>
 
 
-	.globl  memsetup
-memsetup:
+	.globl  lowlevel_init
+lowlevel_init:
 
 	/* BCUCNTREG1 = 0x0040 */
 	la	t0, 0xaf000000
diff --git a/board/trab/Makefile b/board/trab/Makefile
index 4e6e9d68cb1..ced9bc5bc8f 100644
--- a/board/trab/Makefile
+++ b/board/trab/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= trab.o flash.o vfd.o cmd_trab.o memory.o tsc2000.o auto_update.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
 
diff --git a/board/trab/memsetup.S b/board/trab/lowlevel_init.S
index c93dff67062..128ae7e4aa5 100644
--- a/board/trab/memsetup.S
+++ b/board/trab/lowlevel_init.S
@@ -140,8 +140,8 @@
 _TEXT_BASE:
 	.word	TEXT_BASE
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 	/* memory control configuration */
 	/* make r0 relative the current location so that it */
 	/* reads SMRDATA out of FLASH rather than memory ! */
diff --git a/board/wepep250/Makefile b/board/wepep250/Makefile
index 802ccb950fb..11ad8fbeccd 100644
--- a/board/wepep250/Makefile
+++ b/board/wepep250/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= wepep250.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/wepep250/memsetup.S b/board/wepep250/lowlevel_init.S
index 26fc0eaf254..b172ceaa614 100644
--- a/board/wepep250/memsetup.S
+++ b/board/wepep250/lowlevel_init.S
@@ -35,8 +35,8 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 
 	mov	r10, lr
 
diff --git a/board/xaeniax/Makefile b/board/xaeniax/Makefile
index da5a5bad3be..7c5f0cd1a1f 100644
--- a/board/xaeniax/Makefile
+++ b/board/xaeniax/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= xaeniax.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/xaeniax/memsetup.S b/board/xaeniax/lowlevel_init.S
index 5c43b85ad41..fe3e7128a4b 100644
--- a/board/xaeniax/memsetup.S
+++ b/board/xaeniax/lowlevel_init.S
@@ -3,7 +3,7 @@
  *
  * NOTE: I haven't clean this up considerably, just enough to get it
  * running. See hal_platform_setup.h for the source. See
- * board/cradle/memsetup.S for another PXA250 setup that is
+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
  * much cleaner.
  *
  * See file CREDITS for list of people who contributed to this
@@ -39,8 +39,8 @@ DRAM_SIZE:  .long   CFG_DRAM_SIZE
 	.endm
 
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 
 	mov	 r10, lr
 
@@ -416,9 +416,9 @@ test:
 #endif
 
 	/* ---------------------------------------------------------------- */
-	/* End memsetup                                                     */
+	/* End lowlevel_init                                                     */
 	/* ---------------------------------------------------------------- */
 
-endmemsetup:
+endlowlevel_init:
 
 	mov     pc, lr
diff --git a/board/xm250/Makefile b/board/xm250/Makefile
index 3572f726837..1b0a3f0178f 100644
--- a/board/xm250/Makefile
+++ b/board/xm250/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= xm250.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $^
diff --git a/board/xm250/memsetup.S b/board/xm250/lowlevel_init.S
index f68e8433930..2ebd39554a1 100644
--- a/board/xm250/memsetup.S
+++ b/board/xm250/lowlevel_init.S
@@ -43,8 +43,8 @@ DRAM_SIZE:  .long   CFG_DRAM_SIZE
 	.endm
 */
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 
 	mov	r10, lr
 
@@ -516,4 +516,4 @@ mem_init:
 
 	mov	pc, r10
 
-@ End memsetup
+@ End lowlevel_init
diff --git a/board/xsengine/Makefile b/board/xsengine/Makefile
index 591b728de15..ed1464af3e9 100644
--- a/board/xsengine/Makefile
+++ b/board/xsengine/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	:= xsengine.o flash.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS) $(SOBJS)
diff --git a/board/xsengine/memsetup.S b/board/xsengine/lowlevel_init.S
index b94711846e0..309faabd921 100644
--- a/board/xsengine/memsetup.S
+++ b/board/xsengine/lowlevel_init.S
@@ -4,8 +4,8 @@
 
 DRAM_SIZE:  .long   CFG_DRAM_SIZE
 
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 
    mov      r10, lr
 
diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S
index bde936a7517..0e15965df6b 100644
--- a/cpu/arm720t/start.S
+++ b/cpu/arm720t/start.S
@@ -316,10 +316,10 @@ cpu_init_crit:
 	/*
 	 * before relocating, we have to setup RAM timing
 	 * because memory timing is board-dependent, you will
-	 * find a memsetup.S in your board directory.
+	 * find a lowlevel_init.S in your board directory.
 	 */
 	mov	ip, lr
-	bl	memsetup
+	bl	lowlevel_init
 	mov	lr, ip
 
 	mov	pc, lr
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index f3481936425..a7cabf8f321 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -257,10 +257,10 @@ cpu_init_crit:
 	/*
 	 * before relocating, we have to setup RAM timing
 	 * because memory timing is board-dependend, you will
-	 * find a memsetup.S in your board directory.
+	 * find a lowlevel_init.S in your board directory.
 	 */
 	mov	ip, lr
-	bl	memsetup
+	bl	lowlevel_init
 	mov	lr, ip
 
 	mov	pc, lr
diff --git a/cpu/at91rm9200/lowlevel.S b/cpu/at91rm9200/lowlevel.S
index 030f9e194a8..c8af7a602aa 100644
--- a/cpu/at91rm9200/lowlevel.S
+++ b/cpu/at91rm9200/lowlevel.S
@@ -30,7 +30,7 @@
 #include <config.h>
 #include <version.h>
 
-#ifdef CONFIG_BOOTBINFUNC
+#ifdef CONFIG_INIT_CRITICAL
 /*
  * some parameters for the board
  *
@@ -197,4 +197,4 @@ SMRDATA1:
 	.word SDRAM
 	.word SDRAM_VAL
 	/* SMRDATA1 is 176 bytes long */
-#endif /* CONFIG_BOOTBINFUNC */
+#endif /* CONFIG_INIT_CRITICAL */
diff --git a/cpu/at91rm9200/start.S b/cpu/at91rm9200/start.S
index 0dbc0094a4a..e897e6b9c90 100644
--- a/cpu/at91rm9200/start.S
+++ b/cpu/at91rm9200/start.S
@@ -115,7 +115,7 @@ reset:
 	orr     r0,r0,#0xd3 /* was 13 */
 	msr     cpsr,r0
 
-#ifdef CONFIG_BOOTBINFUNC
+#ifdef CONFIG_INIT_CRITICAL
 	/* scratch stack */
 	ldr 	r1, =0x00204000
 	/* Insure word alignment */
@@ -141,7 +141,7 @@ reset:
 	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
 	orr	r0, r0, #0xC0000000	@ set bits 31:30 (iA, nF)
 	mcr     p15, 0, r0, c1, c0, 0	@ write r0 in cp15 control register (cp15 r1)
-#endif /* CONFIG_BOOTBINFUNC */
+#endif /* CONFIG_INIT_CRITICAL */
 	/*
 	 * relocate exeception table
 	 */
@@ -160,9 +160,7 @@ copyex:
 	 */
 #ifdef CONFIG_INIT_CRITICAL
 	bl      cpu_init_crit
-#endif
 
-#ifdef CONFIG_BOOTBINFUNC
 relocate:				/* relocate U-Boot to RAM	    */
 	adr	r0, _start		/* r0 <- current position of code   */
 	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
@@ -179,7 +177,7 @@ copy_loop:
 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end addreee [r2]    */
 	ble	copy_loop
-#endif /* CONFIG_BOOTBINFUNC */
+#endif /* CONFIG_INIT_CRITICAL */
 
 	/* Set up the stack						    */
 stack_setup:
diff --git a/cpu/lh7a40x/start.S b/cpu/lh7a40x/start.S
index 4f023a59fe9..5dca77363f9 100644
--- a/cpu/lh7a40x/start.S
+++ b/cpu/lh7a40x/start.S
@@ -229,10 +229,10 @@ cpu_init_crit:
 	/*
 	 * before relocating, we have to setup RAM timing
 	 * because memory timing is board-dependend, you will
-	 * find a memsetup.S in your board directory.
+	 * find a lowlevel_init.S in your board directory.
 	 */
 	mov	ip, lr
-	bl	memsetup
+	bl	lowlevel_init
 	mov	lr, ip
 
 	mov	pc, lr
diff --git a/cpu/mips/start.S b/cpu/mips/start.S
index 45a90a80fae..ff105a41840 100644
--- a/cpu/mips/start.S
+++ b/cpu/mips/start.S
@@ -243,7 +243,7 @@ reset:
 
 	/* Initialize any external memory.
 	 */
-	bal	memsetup
+	bal	lowlevel_init
 	nop
 
 	/* Initialize caches...
diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S
index d74f41ff383..da753a18dac 100644
--- a/cpu/pxa/start.S
+++ b/cpu/pxa/start.S
@@ -218,10 +218,10 @@ setspeed_done:
 	/*
 	 * before relocating, we have to setup RAM timing
 	 * because memory timing is board-dependend, you will
-	 * find a memsetup.S in your board directory.
+	 * find a lowlevel_init.S in your board directory.
 	 */
 	mov	ip,	lr
-	bl	memsetup
+	bl	lowlevel_init
 	mov	lr,	ip
 
 	/* Memory interfaces are working. Disable MMU and enable I-cache.   */
diff --git a/cpu/s3c44b0/start.S b/cpu/s3c44b0/start.S
index b4b7c3f62ce..fc7f59228ad 100644
--- a/cpu/s3c44b0/start.S
+++ b/cpu/s3c44b0/start.S
@@ -117,9 +117,9 @@ reset:
 	/*
 	 * before relocating, we have to setup RAM timing
 	 * because memory timing is board-dependend, you will
-	 * find a memsetup.S in your board directory.
+	 * find a lowlevel_init.S in your board directory.
 	 */
-	bl	memsetup
+	bl	lowlevel_init
 #endif
 
 relocate:				/* relocate U-Boot to RAM	    */
diff --git a/cpu/sa1100/start.S b/cpu/sa1100/start.S
index 79743440705..08e41c7d793 100644
--- a/cpu/sa1100/start.S
+++ b/cpu/sa1100/start.S
@@ -213,10 +213,10 @@ cpu_init_crit:
 	/*
 	 * before relocating, we have to setup RAM timing
 	 * because memory timing is board-dependend, you will
-	 * find a memsetup.S in your board directory.
+	 * find a lowlevel_init.S in your board directory.
 	 */
 	mov	ip,	lr
-	bl	memsetup
+	bl	lowlevel_init
 	mov	lr,	ip
 
 	/*
diff --git a/doc/README.modnet50 b/doc/README.modnet50
index d8d9c9d8210..30338ce8cc7 100644
--- a/doc/README.modnet50
+++ b/doc/README.modnet50
@@ -47,7 +47,7 @@ Files:
 
 cpu/arm720t/serial_netarm.c .. serial I/O for the cpu
 
-board/modnet50/memsetup.S   .. memory setup for ModNET50
+board/modnet50/lowlevel_init.S   .. memory setup for ModNET50
 board/modnet50/flash.c	    .. flash routines
 board/modnet50/modnet50.c   .. some board init stuff
 
diff --git a/include/configs/B2.h b/include/configs/B2.h
index 2fc97b27c2e..b031826f3f9 100644
--- a/include/configs/B2.h
+++ b/include/configs/B2.h
@@ -34,7 +34,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL            /* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/SX1.h b/include/configs/SX1.h
index de7f387817f..7c51a1b040f 100644
--- a/include/configs/SX1.h
+++ b/include/configs/SX1.h
@@ -27,7 +27,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 9ca80ab6707..2c664d59366 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -33,7 +33,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index 8146fe723d6..d32ec34fc2a 100644
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -29,7 +29,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /* ARM asynchronous clock */
 #define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
@@ -44,10 +44,7 @@
 #define CONFIG_SETUP_MEMORY_TAGS 1
 #define CONFIG_INITRD_TAG	1
 
-/* define this to include the functionality of boot.bin in u-boot */
-#undef CONFIG_BOOTBINFUNC
-
-#ifdef CONFIG_BOOTBINFUNC
+#ifdef CONFIG_INIT_CRITICAL
 #define CFG_USE_MAIN_OSCILLATOR		1
 /* flash */
 #define MC_PUIA_VAL	0x00000000
@@ -77,7 +74,7 @@
 #define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
 #define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
 #define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
-#endif
+#endif	/* CONFIG_INIT_CRITICAL */
 /*
  * Size of malloc() pool
  */
@@ -180,19 +177,19 @@
 #define CFG_ENV_SIZE			0x2000  /* 0x8000 */
 #else
 #define CFG_ENV_IS_IN_FLASH		1
-#ifdef CONFIG_BOOTBINFUNC
+#ifdef CONFIG_INIT_CRITICAL
 #define CFG_ENV_ADDR			(PHYS_FLASH_1 + 0x60000)  /* after u-boot.bin */
 #define CFG_ENV_SIZE			0x10000 /* sectors are 64K here */
 #else
 #define CFG_ENV_ADDR			(PHYS_FLASH_1 + 0xe000)  /* between boot.bin and u-boot.bin.gz */
 #define CFG_ENV_SIZE			0x2000  /* 0x8000 */
-#endif
-#endif
+#endif	/* CONFIG_INIT_CRITICAL */
+#endif	/* CFG_ENV_IS_IN_DATAFLASH */
 
 
 #define CFG_LOAD_ADDR		0x21000000  /* default load address */
 
-#ifdef CONFIG_BOOTBINFUNC
+#ifdef CONFIG_INIT_CRITICAL
 #define CFG_BOOT_SIZE		0x00 /* 0 KBytes */
 #define CFG_U_BOOT_BASE		PHYS_FLASH_1
 #define CFG_U_BOOT_SIZE		0x60000 /* 384 KBytes */
@@ -200,7 +197,7 @@
 #define CFG_BOOT_SIZE		0x6000 /* 24 KBytes */
 #define CFG_U_BOOT_BASE		(PHYS_FLASH_1 + 0x10000)
 #define CFG_U_BOOT_SIZE		0x10000 /* 64 KBytes */
-#endif
+#endif	/* CONFIG_INIT_CRITICAL */
 
 #define CFG_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
 
diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
index 34efc384b91..5a0f460e68b 100644
--- a/include/configs/cmc_pu2.h
+++ b/include/configs/cmc_pu2.h
@@ -29,7 +29,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /* ARM asynchronous clock */
 #define AT91C_MAIN_CLOCK	207360000	/* from 18.432 MHz crystal (18432000 / 4 * 45) */
@@ -44,15 +44,7 @@
 #define CONFIG_SETUP_MEMORY_TAGS 1
 #define CONFIG_INITRD_TAG	1
 
-/* define this to include the functionality of boot.bin in u-boot */
-#define CONFIG_BOOTBINFUNC
-
-/* just to make sure */
-#ifndef CONFIG_BOOTBINFUNC
-#define CONFIG_BOOTBINFUNC
-#endif
-
-#ifdef CONFIG_BOOTBINFUNC
+#ifdef CONFIG_INIT_CRITICAL
 #define CFG_USE_MAIN_OSCILLATOR		1
 /* flash */
 #define MC_PUIA_VAL	0x00000000
@@ -82,7 +74,7 @@
 #define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
 #define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
 #define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
-#endif
+#endif	/* CONFIG_INIT_CRITICAL */
 
 /*
  * Size of malloc() pool
diff --git a/include/configs/cradle.h b/include/configs/cradle.h
index 2cec4c7c513..ca7a97b5628 100644
--- a/include/configs/cradle.h
+++ b/include/configs/cradle.h
@@ -32,7 +32,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL            /* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
@@ -306,7 +306,7 @@
 #else
 #define CFG_MDCNFG_VAL      0x00001aa1  /* FIXME can DTC be 01?     */
 #define CFG_MDMRS_VAL       0x00000000
-#define CFG_MDREFR_VAL      0x00403018  /* Initial setting, individual bits set in memsetup.S */
+#define CFG_MDREFR_VAL      0x00403018  /* Initial setting, individual bits set in lowlevel_init.S */
 #endif
 
 /*
diff --git a/include/configs/csb226.h b/include/configs/csb226.h
index 1b39d23c884..0b2b251baeb 100644
--- a/include/configs/csb226.h
+++ b/include/configs/csb226.h
@@ -37,7 +37,7 @@
  * If we are developing, we might want to start U-Boot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h
index f3a871bda3f..b14e35b6288 100644
--- a/include/configs/dnp1110.h
+++ b/include/configs/dnp1110.h
@@ -31,8 +31,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
-#undef CONFIG_INIT_CRITICAL		/* undef for developing */
+#undef CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h
index d9dd620c1ca..41ad3943e1c 100644
--- a/include/configs/ep7312.h
+++ b/include/configs/ep7312.h
@@ -31,7 +31,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL            /* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h
index 24b1779b4cd..9e0ed51fa48 100644
--- a/include/configs/evb4510.h
+++ b/include/configs/evb4510.h
@@ -33,7 +33,7 @@
  * Also swap the flash1 and flash2 addresses during debug.
  *
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h
index 618b25ae2df..dbb8dec85dc 100644
--- a/include/configs/gcplus.h
+++ b/include/configs/gcplus.h
@@ -38,7 +38,7 @@
  * e.g. bootp/tftp download of the kernel is a far more convenient
  * when testing new kernels on this target. However the ADS GCPlus Linux
  * boot ROM leaves the MMU enabled when it passes control to U-Boot. So
- * we use memsetup (CONFIG_INIT_CRITICAL) to remedy that problem.
+ * we use lowlevel_init (CONFIG_INIT_CRITICAL) to remedy that problem.
  */
 #define CONFIG_INIT_CRITICAL
 
diff --git a/include/configs/impa7.h b/include/configs/impa7.h
index b4c1edfa3dc..dbc951de65e 100644
--- a/include/configs/impa7.h
+++ b/include/configs/impa7.h
@@ -31,7 +31,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL            /* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index f8845192218..a3d36a0d8f0 100644
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -34,7 +34,7 @@
  * If we are developing, we might want to start U-Boot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h
index 1add778e5fe..a8067f6ef2a 100644
--- a/include/configs/ixdp425.h
+++ b/include/configs/ixdp425.h
@@ -41,7 +41,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL            /* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 #undef CONFIG_USE_IRQ                   /* we don't need IRQ/FIQ stuff */
 
diff --git a/include/configs/lart.h b/include/configs/lart.h
index c98f3777ca2..3c9895ab27e 100644
--- a/include/configs/lart.h
+++ b/include/configs/lart.h
@@ -31,7 +31,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/logodl.h b/include/configs/logodl.h
index 2aee461fdd8..b320a4050df 100644
--- a/include/configs/logodl.h
+++ b/include/configs/logodl.h
@@ -34,7 +34,7 @@
  * If we are developing, we might want to start U-Boot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h
index 808fe1c7b09..6f2c32c5469 100644
--- a/include/configs/lpd7a400.h
+++ b/include/configs/lpd7a400.h
@@ -27,7 +27,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL	/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 #undef CONFIG_USE_IRQ
 
diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h
index de465ea368c..e6855fb1ef3 100644
--- a/include/configs/lpd7a404.h
+++ b/include/configs/lpd7a404.h
@@ -27,7 +27,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL	/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 #undef CONFIG_USE_IRQ
 
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index efe205de4ca..536a175bd65 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -34,7 +34,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h
index fd1b47c4fc4..166aa1180cf 100644
--- a/include/configs/modnet50.h
+++ b/include/configs/modnet50.h
@@ -31,7 +31,7 @@
  * If we are developing, we might want to start u-boot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL            /* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index 3f1419e5ab5..f7ccea3d45e 100644
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -32,7 +32,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h
index 11d21b20d19..af39e2e88d4 100644
--- a/include/configs/ns9750dev.h
+++ b/include/configs/ns9750dev.h
@@ -31,7 +31,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h
index 88d6c462b43..552beedc5cf 100644
--- a/include/configs/omap1510inn.h
+++ b/include/configs/omap1510inn.h
@@ -30,7 +30,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL            /* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h
index beff6d89d71..9b822152c24 100644
--- a/include/configs/omap1610h2.h
+++ b/include/configs/omap1610h2.h
@@ -30,7 +30,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL            /* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h
index d0608ddef94..c00976efd14 100644
--- a/include/configs/omap1610inn.h
+++ b/include/configs/omap1610inn.h
@@ -30,7 +30,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL            /* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index 43be807f6a5..cd2dbf18b82 100644
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -30,8 +30,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-
-#define CONFIG_INIT_CRITICAL		/*undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h
index ace380fe2f0..1bdea6c5ab7 100644
--- a/include/configs/omap730p2.h
+++ b/include/configs/omap730p2.h
@@ -32,7 +32,7 @@
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
 
-#define CONFIG_INIT_CRITICAL		     /* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h
index f7338034b74..9ba19c85068 100644
--- a/include/configs/pleb2.h
+++ b/include/configs/pleb2.h
@@ -34,7 +34,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
@@ -208,8 +208,8 @@
 #define CFG_MDCNFG_VAL		0x00000aC9 /* Memory timings for the SDRAM.
 					      tRP=2, CL=2, tRCD=2, tRAS=5, tRC=8 */
 
-#define CFG_MDREFR_VAL		0x00403018 /* Initial setting, individual
-					      bits set in memsetup.S	  */
+#define CFG_MDREFR_VAL		0x00403018 /* Initial setting, individual	*/
+					   /* bits set in lowlevel_init.S	*/
 #define CFG_MDMRS_VAL		0x00000000
 
 /*
diff --git a/include/configs/shannon.h b/include/configs/shannon.h
index 7afe62d7cc1..8a4e3709b14 100644
--- a/include/configs/shannon.h
+++ b/include/configs/shannon.h
@@ -37,7 +37,7 @@
  * bring us to live
  */
 #define CONFIG_INFERNO			/* we are using the inferno bootldr */
-#undef CONFIG_INIT_CRITICAL		/* undef for developing */
+#undef CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h
index b95b8c073c8..f477575be8d 100644
--- a/include/configs/smdk2400.h
+++ b/include/configs/smdk2400.h
@@ -34,7 +34,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index 7e3a02d29ba..2a1cd7707a5 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -33,7 +33,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
index e8c437364fc..6fda7b96fd5 100644
--- a/include/configs/suzaku.h
+++ b/include/configs/suzaku.h
@@ -29,7 +29,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/trab.h b/include/configs/trab.h
index 137d9346773..2f592605644 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -40,7 +40,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h
index a8a8ee535cd..ca32efb3c45 100644
--- a/include/configs/wepep250.h
+++ b/include/configs/wepep250.h
@@ -27,7 +27,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL            /* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 #define CONFIG_PXA250          1        /* this is an PXA250 CPU     */
 #define CONFIG_WEPEP250        1        /* config for wepep250 board */
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index fc3739f41d5..1177003c801 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -40,7 +40,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
 #undef CONFIG_INIT_CRITICAL
diff --git a/include/configs/xm250.h b/include/configs/xm250.h
index 10f69d998e0..1be7dd46a7d 100644
--- a/include/configs/xm250.h
+++ b/include/configs/xm250.h
@@ -32,7 +32,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /*
  * High Level Configuration Options
@@ -330,7 +330,7 @@
 #define CFG_MSC2_VAL	    0x35f435fc	/* IDE	   / BCR + WatchDog (cs4)/(cS5)	  */
 #define CFG_MDCNFG_VAL	    0x000009c9
 #define CFG_MDMRS_VAL	    0x00220022
-#define CFG_MDREFR_VAL	    0x000da018	/* Initial setting, individual bits set in memsetup.S */
+#define CFG_MDREFR_VAL	    0x000da018	/* Initial setting, individual bits set in lowlevel_init.S */
 
 /*
  * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init)
diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h
index 87d2c942d76..6b15766daa2 100644
--- a/include/configs/xsengine.h
+++ b/include/configs/xsengine.h
@@ -32,7 +32,7 @@
  * If we are developing, we might want to start armboot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
-#define CONFIG_INIT_CRITICAL				/* undef for developing */
+#define CONFIG_INIT_CRITICAL
 
 /* High Level Configuration Options */
 #define CONFIG_PXA250			1		/* This is an PXA250 CPU    */
author	wdenk <wdenk>	2005-04-02 23:52:25 +0000
committer	wdenk <wdenk>	2005-04-02 23:52:25 +0000
commit	400558b561e2bdb47f87b96b3510dda0881a3662 (patch)
tree	479fa3918e0031a95cdac9468cb8396e1f1a9b60
parent	414eec35e3832f4f9ce8a25ace7ead638be1f76f (diff)