diff options
| author | wdenk <wdenk> | 2003-10-08 22:45:44 +0000 |
|---|---|---|
| committer | wdenk <wdenk> | 2003-10-08 22:45:44 +0000 |
| commit | 54387ac931fa7cc92cd45c53798379af1f9adc44 (patch) | |
| tree | 95fe2f39a2a798e880b5bebc96a71576d9c9cd43 /README | |
| parent | fc3e2165efda62670d447617a7d44c5666178ea4 (diff) | |
* Patch by Yuli Barcohen, 25 Sep 2003:
add support for Zephyr Engineering ZPC.1900 board
* Patch by Anders Larsen, 23 Sep 2003:
add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
implemented for the x86 architecture)
Diffstat (limited to 'README')
| -rw-r--r-- | README | 8 |
1 files changed, 5 insertions, 3 deletions
@@ -239,6 +239,7 @@ Directory Hierarchy: - board/westel/ Files specific to boards manufactured by Westel Wireless - board/westel/amx860 Files specific to AMX860 boards - board/utx8245 Files specific to UTX8245 boards +- board/zpc1900 Files specific to Zephyr Engineering ZPC.1900 board Software Configuration: ======================= @@ -355,7 +356,7 @@ The following options need to be configured: CONFIG_IAD210, CONFIG_RPXlite, CONFIG_sbc8260, CONFIG_EBONY, CONFIG_sacsng, CONFIG_FPS860L, CONFIG_V37, CONFIG_ELPT860, CONFIG_CMI, - CONFIG_NETVIA, CONFIG_RBC823 + CONFIG_NETVIA, CONFIG_RBC823, CONFIG_ZPC1900 ARM based boards: ----------------- @@ -393,7 +394,7 @@ The following options need to be configured: Possible values are: CFG_8260ADS - original MPC8260ADS CFG_8266ADS - MPC8266ADS (untested) - CFG_PQ2FADS - PQ2FADS-ZU + CFG_PQ2FADS - PQ2FADS-ZU or PQ2FADS-VR - MPC824X Family Member (if CONFIG_MPC824X is defined) @@ -1943,7 +1944,8 @@ configurations; the following names are supported: GEN860T_config EBONY_config FPS860L_config ELPT860_config cmi_mpc5xx_config NETVIA_config at91rm9200dk_config omap1510inn_config MPC8260ADS_config - omap1610inn_config + omap1610inn_config ZPC1900_config + Note: for some board special configuration names may exist; check if additional information is available from the board vendor; for instance, the TQM8xxL systems run normally at 50 MHz and use a |