* Patch by Tolunay Orkun, 5 Mar 2004:

  Fix early board initialization for Cogent CSB272 board

* Patch by Ed Okerson, 3 Mar 2004:
  fix CFI flash writes for little endian systems

* Patch by Reinhard Meyer, 01 Mar 2004:
  generalize USB and IDE support for MPC5200 with according
  changes to IceCube.h and TOP5200.h
  add Am29LV256 256 MBit FLASH support for TOP5200 boards
  add info about USB and IDE to README

1 files changed, 14 insertions, 4 deletions

diff --git a/README b/README
index 5bf0ead2459..1df1ef0639e 100644
--- a/README
+++ b/README
@@ -660,10 +660,13 @@ The following options need to be configured:
 		one partition type as well.
 
 - IDE Reset method:
-		CONFIG_IDE_RESET_ROUTINE
+		CONFIG_IDE_RESET_ROUTINE - this is defined in several
+		board configurations files but used nowhere!
 
-		Set this to define that instead of a reset Pin, the
-		routine ide_set_reset(int idereset) will be used.
+		CONFIG_IDE_RESET - is this is defined, IDE Reset will
+		be performed by calling the function
+			ide_set_reset(int reset)
+		which has to be defined in a board specific file
 
 - ATAPI Support:
 		CONFIG_ATAPI
@@ -728,7 +731,7 @@ The following options need to be configured:
 
 - USB Support:
 		At the moment only the UHCI host controller is
-		supported (PIP405, MIP405); define
+		supported (PIP405, MIP405, MPC5200); define
 		CONFIG_USB_UHCI to enable it.
 		define CONFIG_USB_KEYBOARD to enable the USB Keyboard
 		end define CONFIG_USB_STORAGE to enable the USB
@@ -736,6 +739,13 @@ The following options need to be configured:
 		Note:
 		Supported are USB Keyboards and USB Floppy drives
 		(TEAC FD-05PUB).
+		MPC5200 USB requires additional defines:
+			CONFIG_USB_CLOCK
+				for 528 MHz Clock: 0x0001bbbb
+			CONFIG_USB_CONFIG
+				for differential drivers: 0x00001000
+				for single ended drivers: 0x00005000
+
 
 - MMC Support:
 		The MMC controller on the Intel PXA is supported. To