diff options
| author | Lokesh Vutla <lokeshvutla@ti.com> | 2017-05-03 16:58:26 +0530 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2017-05-08 12:34:29 -0400 |
| commit | ee3c6532be343e495d11adfe15a457d24d9747d9 (patch) | |
| tree | 202b389517d50e835d6ce1e1a79d7ec2db979e67 /arch/arm/mach-keystone/clock.c | |
| parent | c5f177debc8b430c0a0038a9d8f6309eb3bd6299 (diff) | |
ARM: keystone2: Add support for getting external clock dynamically
One some keystone2 platforms like K2G ICE, there is an option
to switch between 24MHz or 25MHz as sysclk. But the existing
driver assumes it is always 24MHz. Add support for getting
all reference clocks dynamically by reading boot pins.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'arch/arm/mach-keystone/clock.c')
| -rw-r--r-- | arch/arm/mach-keystone/clock.c | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/arch/arm/mach-keystone/clock.c b/arch/arm/mach-keystone/clock.c index 68f898036ff..645bd9629e8 100644 --- a/arch/arm/mach-keystone/clock.c +++ b/arch/arm/mach-keystone/clock.c @@ -284,7 +284,7 @@ static unsigned long pll_freq_get(int pll) u32 tmp, reg; if (pll == MAIN_PLL) { - ret = external_clk[sys_clk]; + ret = get_external_clk(sys_clk); if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN_MASK) { /* PLL mode */ tmp = __raw_readl(KS2_MAINPLLCTL0); @@ -302,23 +302,23 @@ static unsigned long pll_freq_get(int pll) } else { switch (pll) { case PASS_PLL: - ret = external_clk[pa_clk]; + ret = get_external_clk(pa_clk); reg = KS2_PASSPLLCTL0; break; case TETRIS_PLL: - ret = external_clk[tetris_clk]; + ret = get_external_clk(tetris_clk); reg = KS2_ARMPLLCTL0; break; case DDR3A_PLL: - ret = external_clk[ddr3a_clk]; + ret = get_external_clk(ddr3a_clk); reg = KS2_DDR3APLLCTL0; break; case DDR3B_PLL: - ret = external_clk[ddr3b_clk]; + ret = get_external_clk(ddr3b_clk); reg = KS2_DDR3BPLLCTL0; break; case UART_PLL: - ret = external_clk[uart_clk]; + ret = get_external_clk(uart_clk); reg = KS2_UARTPLLCTL0; break; default: |