Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'

15 files changed, 40 insertions, 248 deletions

diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index dfa3760dfc5..8e7411d4378 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -418,55 +418,6 @@ static void setup_dplls(void)
 #endif
 }
 
-#ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL
-static void setup_non_essential_dplls(void)
-{
-	u32 abe_ref_clk;
-	const struct dpll_params *params;
-
-	/* IVA */
-	clrsetbits_le32((*prcm)->cm_bypclk_dpll_iva,
-		CM_BYPCLK_DPLL_IVA_CLKSEL_MASK, DPLL_IVA_CLKSEL_CORE_X2_DIV_2);
-
-	params = get_iva_dpll_params(*dplls_data);
-	do_setup_dpll((*prcm)->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva");
-
-	/* Configure ABE dpll */
-	params = get_abe_dpll_params(*dplls_data);
-#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
-	abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK;
-
-	if (omap_revision() == DRA752_ES1_0)
-		/* Select the sys clk for dpll_abe */
-		clrsetbits_le32((*prcm)->cm_abe_pll_sys_clksel,
-				CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK,
-				CM_ABE_PLL_SYS_CLKSEL_SYSCLK2);
-#else
-	abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK;
-	/*
-	 * We need to enable some additional options to achieve
-	 * 196.608MHz from 32768 Hz
-	 */
-	setbits_le32((*prcm)->cm_clkmode_dpll_abe,
-			CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK|
-			CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK|
-			CM_CLKMODE_DPLL_LPMODE_EN_MASK|
-			CM_CLKMODE_DPLL_REGM4XEN_MASK);
-	/* Spend 4 REFCLK cycles at each stage */
-	clrsetbits_le32((*prcm)->cm_clkmode_dpll_abe,
-			CM_CLKMODE_DPLL_RAMP_RATE_MASK,
-			1 << CM_CLKMODE_DPLL_RAMP_RATE_SHIFT);
-#endif
-
-	/* Select the right reference clk */
-	clrsetbits_le32((*prcm)->cm_abe_pll_ref_clksel,
-			CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK,
-			abe_ref_clk << CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT);
-	/* Lock the dpll */
-	do_setup_dpll((*prcm)->cm_clkmode_dpll_abe, params, DPLL_LOCK, "abe");
-}
-#endif
-
 u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic)
 {
 	u32 offset_code;
@@ -760,10 +711,6 @@ void prcm_init(void)
 		timer_init();
 		scale_vcores(*omap_vcores);
 		setup_dplls();
-#ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL
-		setup_non_essential_dplls();
-		enable_non_essential_clocks();
-#endif
 		setup_warmreset_time();
 		break;
 	default:
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index cd6289b4fca..429c4becf34 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -179,8 +179,7 @@ void emif_update_timings(u32 base, const struct emif_regs *regs)
 	writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
 	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
 
-	if ((omap_revision() >= OMAP5430_ES1_0) ||
-				(omap_revision() == DRA752_ES1_0)) {
+	if ((omap_revision() >= OMAP5430_ES1_0) || is_dra7xx()) {
 		writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0,
 			&emif->emif_l3_config);
 	} else if (omap_revision() >= OMAP4460_ES1_0) {
@@ -309,7 +308,7 @@ static void ddr3_init(u32 base, const struct emif_regs *regs)
 	 * The same sequence should work on OMAP5432 as well. But strange that
 	 * it is not working
 	 */
-	if (omap_revision() == DRA752_ES1_0) {
+	if (is_dra7xx()) {
 		do_ext_phy_settings(base, regs);
 		writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
 		writel(regs->sdram_config_init, &emif->emif_sdram_config);
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index 85d375432f9..bf2951031d9 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -43,16 +43,10 @@ static void set_mux_conf_regs(void)
 		set_muxconf_regs_essential();
 		break;
 	case OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL:
-#ifdef CONFIG_SYS_ENABLE_PADS_ALL
-		set_muxconf_regs_non_essential();
-#endif
 		break;
 	case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
 	case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
 		set_muxconf_regs_essential();
-#ifdef CONFIG_SYS_ENABLE_PADS_ALL
-		set_muxconf_regs_non_essential();
-#endif
 		break;
 	}
 }
diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
index 1b2f439241d..4dec73e9ec2 100644
--- a/arch/arm/cpu/armv7/omap4/hw_data.c
+++ b/arch/arm/cpu/armv7/omap4/hw_data.c
@@ -399,91 +399,6 @@ void enable_basic_uboot_clocks(void)
 			 1);
 }
 
-/*
- * Enable non-essential clock domains, modules and
- * do some additional special settings needed
- */
-void enable_non_essential_clocks(void)
-{
-	u32 const clk_domains_non_essential[] = {
-		(*prcm)->cm_mpu_m3_clkstctrl,
-		(*prcm)->cm_ivahd_clkstctrl,
-		(*prcm)->cm_dsp_clkstctrl,
-		(*prcm)->cm_dss_clkstctrl,
-		(*prcm)->cm_sgx_clkstctrl,
-		(*prcm)->cm1_abe_clkstctrl,
-		(*prcm)->cm_c2c_clkstctrl,
-		(*prcm)->cm_cam_clkstctrl,
-		(*prcm)->cm_dss_clkstctrl,
-		(*prcm)->cm_sdma_clkstctrl,
-		0
-	};
-
-	u32 const clk_modules_hw_auto_non_essential[] = {
-		(*prcm)->cm_l3instr_l3_3_clkctrl,
-		(*prcm)->cm_l3instr_l3_instr_clkctrl,
-		(*prcm)->cm_l3instr_intrconn_wp1_clkctrl,
-		(*prcm)->cm_l3init_hsi_clkctrl,
-		0
-	};
-
-	u32 const clk_modules_explicit_en_non_essential[] = {
-		(*prcm)->cm1_abe_aess_clkctrl,
-		(*prcm)->cm1_abe_pdm_clkctrl,
-		(*prcm)->cm1_abe_dmic_clkctrl,
-		(*prcm)->cm1_abe_mcasp_clkctrl,
-		(*prcm)->cm1_abe_mcbsp1_clkctrl,
-		(*prcm)->cm1_abe_mcbsp2_clkctrl,
-		(*prcm)->cm1_abe_mcbsp3_clkctrl,
-		(*prcm)->cm1_abe_slimbus_clkctrl,
-		(*prcm)->cm1_abe_timer5_clkctrl,
-		(*prcm)->cm1_abe_timer6_clkctrl,
-		(*prcm)->cm1_abe_timer7_clkctrl,
-		(*prcm)->cm1_abe_timer8_clkctrl,
-		(*prcm)->cm1_abe_wdt3_clkctrl,
-		(*prcm)->cm_l4per_gptimer9_clkctrl,
-		(*prcm)->cm_l4per_gptimer10_clkctrl,
-		(*prcm)->cm_l4per_gptimer11_clkctrl,
-		(*prcm)->cm_l4per_gptimer3_clkctrl,
-		(*prcm)->cm_l4per_gptimer4_clkctrl,
-		(*prcm)->cm_l4per_hdq1w_clkctrl,
-		(*prcm)->cm_l4per_mcbsp4_clkctrl,
-		(*prcm)->cm_l4per_mcspi2_clkctrl,
-		(*prcm)->cm_l4per_mcspi3_clkctrl,
-		(*prcm)->cm_l4per_mcspi4_clkctrl,
-		(*prcm)->cm_l4per_mmcsd3_clkctrl,
-		(*prcm)->cm_l4per_mmcsd4_clkctrl,
-		(*prcm)->cm_l4per_mmcsd5_clkctrl,
-		(*prcm)->cm_l4per_uart1_clkctrl,
-		(*prcm)->cm_l4per_uart2_clkctrl,
-		(*prcm)->cm_l4per_uart4_clkctrl,
-		(*prcm)->cm_wkup_keyboard_clkctrl,
-		(*prcm)->cm_wkup_wdtimer2_clkctrl,
-		(*prcm)->cm_cam_iss_clkctrl,
-		(*prcm)->cm_cam_fdif_clkctrl,
-		(*prcm)->cm_dss_dss_clkctrl,
-		(*prcm)->cm_sgx_sgx_clkctrl,
-		0
-	};
-
-	/* Enable optional functional clock for ISS */
-	setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
-
-	/* Enable all optional functional clocks of DSS */
-	setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
-
-	do_enable_clocks(clk_domains_non_essential,
-			 clk_modules_hw_auto_non_essential,
-			 clk_modules_explicit_en_non_essential,
-			 0);
-
-	/* Put camera module in no sleep mode */
-	clrsetbits_le32((*prcm)->cm_cam_clkstctrl,
-			MODULE_CLKCTRL_MODULEMODE_MASK,
-			CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
-			MODULE_CLKCTRL_MODULEMODE_SHIFT);
-}
-
 void hw_data_init(void)
 {
 	u32 omap_rev = omap_revision();
diff --git a/arch/arm/cpu/armv7/omap5/abb.c b/arch/arm/cpu/armv7/omap5/abb.c
index 31b679516ff..3bf88979e5d 100644
--- a/arch/arm/cpu/armv7/omap5/abb.c
+++ b/arch/arm/cpu/armv7/omap5/abb.c
@@ -28,18 +28,25 @@
 s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb)
 {
 	u32 vset;
+	u32 fuse_enable_mask = OMAP5_ABB_FUSE_ENABLE_MASK;
+	u32 fuse_vset_mask = OMAP5_ABB_FUSE_VSET_MASK;
 
+	if (!is_omap54xx()) {
+		/* DRA7 */
+		fuse_enable_mask = DRA7_ABB_FUSE_ENABLE_MASK;
+		fuse_vset_mask = DRA7_ABB_FUSE_VSET_MASK;
+	}
 	/*
 	 * ABB parameters must be properly fused
 	 * otherwise ABB should be disabled
 	 */
 	vset = readl(fuse);
-	if (!(vset & OMAP5_ABB_FUSE_ENABLE_MASK))
+	if (!(vset & fuse_enable_mask))
 		return -1;
 
 	/* prepare VSET value for LDOVBB mux register */
-	vset &= OMAP5_ABB_FUSE_VSET_MASK;
-	vset >>= ffs(OMAP5_ABB_FUSE_VSET_MASK) - 1;
+	vset &= fuse_vset_mask;
+	vset >>= ffs(fuse_vset_mask) - 1;
 	vset <<= ffs(OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK) - 1;
 	vset |= OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK;
 
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index 5268a1fca56..ad971327bf2 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -486,94 +486,6 @@ void enable_basic_uboot_clocks(void)
 			 1);
 }
 
-/*
- * Enable non-essential clock domains, modules and
- * do some additional special settings needed
- */
-void enable_non_essential_clocks(void)
-{
-	u32 const clk_domains_non_essential[] = {
-		(*prcm)->cm_mpu_m3_clkstctrl,
-		(*prcm)->cm_ivahd_clkstctrl,
-		(*prcm)->cm_dsp_clkstctrl,
-		(*prcm)->cm_dss_clkstctrl,
-		(*prcm)->cm_sgx_clkstctrl,
-		(*prcm)->cm1_abe_clkstctrl,
-		(*prcm)->cm_c2c_clkstctrl,
-		(*prcm)->cm_cam_clkstctrl,
-		(*prcm)->cm_dss_clkstctrl,
-		(*prcm)->cm_sdma_clkstctrl,
-		0
-	};
-
-	u32 const clk_modules_hw_auto_non_essential[] = {
-		(*prcm)->cm_mpu_m3_mpu_m3_clkctrl,
-		(*prcm)->cm_ivahd_ivahd_clkctrl,
-		(*prcm)->cm_ivahd_sl2_clkctrl,
-		(*prcm)->cm_dsp_dsp_clkctrl,
-		(*prcm)->cm_l3instr_l3_3_clkctrl,
-		(*prcm)->cm_l3instr_l3_instr_clkctrl,
-		(*prcm)->cm_l3instr_intrconn_wp1_clkctrl,
-		(*prcm)->cm_l3init_hsi_clkctrl,
-		(*prcm)->cm_l4per_hdq1w_clkctrl,
-		0
-	};
-
-	u32 const clk_modules_explicit_en_non_essential[] = {
-		(*prcm)->cm1_abe_aess_clkctrl,
-		(*prcm)->cm1_abe_pdm_clkctrl,
-		(*prcm)->cm1_abe_dmic_clkctrl,
-		(*prcm)->cm1_abe_mcasp_clkctrl,
-		(*prcm)->cm1_abe_mcbsp1_clkctrl,
-		(*prcm)->cm1_abe_mcbsp2_clkctrl,
-		(*prcm)->cm1_abe_mcbsp3_clkctrl,
-		(*prcm)->cm1_abe_slimbus_clkctrl,
-		(*prcm)->cm1_abe_timer5_clkctrl,
-		(*prcm)->cm1_abe_timer6_clkctrl,
-		(*prcm)->cm1_abe_timer7_clkctrl,
-		(*prcm)->cm1_abe_timer8_clkctrl,
-		(*prcm)->cm1_abe_wdt3_clkctrl,
-		(*prcm)->cm_l4per_gptimer9_clkctrl,
-		(*prcm)->cm_l4per_gptimer10_clkctrl,
-		(*prcm)->cm_l4per_gptimer11_clkctrl,
-		(*prcm)->cm_l4per_gptimer3_clkctrl,
-		(*prcm)->cm_l4per_gptimer4_clkctrl,
-		(*prcm)->cm_l4per_mcspi2_clkctrl,
-		(*prcm)->cm_l4per_mcspi3_clkctrl,
-		(*prcm)->cm_l4per_mcspi4_clkctrl,
-		(*prcm)->cm_l4per_mmcsd3_clkctrl,
-		(*prcm)->cm_l4per_mmcsd4_clkctrl,
-		(*prcm)->cm_l4per_mmcsd5_clkctrl,
-		(*prcm)->cm_l4per_uart1_clkctrl,
-		(*prcm)->cm_l4per_uart2_clkctrl,
-		(*prcm)->cm_l4per_uart4_clkctrl,
-		(*prcm)->cm_wkup_keyboard_clkctrl,
-		(*prcm)->cm_wkup_wdtimer2_clkctrl,
-		(*prcm)->cm_cam_iss_clkctrl,
-		(*prcm)->cm_cam_fdif_clkctrl,
-		(*prcm)->cm_dss_dss_clkctrl,
-		(*prcm)->cm_sgx_sgx_clkctrl,
-		0
-	};
-
-	/* Enable optional functional clock for ISS */
-	setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
-
-	/* Enable all optional functional clocks of DSS */
-	setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
-
-	do_enable_clocks(clk_domains_non_essential,
-			 clk_modules_hw_auto_non_essential,
-			 clk_modules_explicit_en_non_essential,
-			 0);
-
-	/* Put camera module in no sleep mode */
-	clrsetbits_le32((*prcm)->cm_cam_clkstctrl,
-			MODULE_CLKCTRL_MODULEMODE_MASK,
-			CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
-			MODULE_CLKCTRL_MODULEMODE_SHIFT);
-}
-
 const struct ctrl_ioregs ioregs_omap5430 = {
 	.ctrl_ddrch = DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
 	.ctrl_lpddr2ch = DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
@@ -639,6 +551,7 @@ void hw_data_init(void)
 	break;
 
 	case DRA752_ES1_0:
+	case DRA752_ES1_1:
 	*prcm = &dra7xx_prcm;
 	*dplls_data = &dra7xx_dplls;
 	*omap_vcores = &dra752_volts;
@@ -666,6 +579,7 @@ void get_ioregs(const struct ctrl_ioregs **regs)
 		*regs = &ioregs_omap5432_es2;
 		break;
 	case DRA752_ES1_0:
+	case DRA752_ES1_1:
 		*regs = &ioregs_dra7xx_es1;
 		break;
 
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
index 5386ae0568b..737d23ccb43 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -333,6 +333,9 @@ void init_omap_revision(void)
 	case DRA752_CONTROL_ID_CODE_ES1_0:
 		*omap_si_rev = DRA752_ES1_0;
 		break;
+	case DRA752_CONTROL_ID_CODE_ES1_1:
+		*omap_si_rev = DRA752_ES1_1;
+		break;
 	default:
 		*omap_si_rev = OMAP5430_SILICON_ID_INVALID;
 	}
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index 77c428b5353..ff328070f77 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -432,11 +432,13 @@ struct omap_sys_ctrl_regs const dra7xx_ctrl = {
 	.control_srcomp_code_latch		= 0x4A002E84,
 	.control_ddr_control_ext_0		= 0x4A002E88,
 	.control_padconf_core_base		= 0x4A003400,
+	.control_std_fuse_opp_vdd_mpu_2		= 0x4A003B24,
 	.control_port_emif1_sdram_config	= 0x4AE0C110,
 	.control_port_emif1_lpddr2_nvm_config	= 0x4AE0C114,
 	.control_port_emif2_sdram_config	= 0x4AE0C118,
 	.control_emif1_sdram_config_ext		= 0x4AE0C144,
 	.control_emif2_sdram_config_ext		= 0x4AE0C148,
+	.control_wkup_ldovbb_mpu_voltage_ctrl	= 0x4AE0C158,
 	.control_padconf_mode			= 0x4AE0C5A0,
 	.control_xtal_oscillator		= 0x4AE0C5A4,
 	.control_i2c_2				= 0x4AE0C5A8,
@@ -807,6 +809,9 @@ struct prcm_regs const dra7xx_prcm = {
 	.cm_dsp_clkstctrl			= 0x4a005400,
 	.cm_dsp_dsp_clkctrl			= 0x4a005420,
 
+	/* prm irqstatus regs */
+	.prm_irqstatus_mpu_2			= 0x4ae06014,
+
 	/* cm2.ckgen */
 	.cm_clksel_usb_60mhz			= 0x4a008104,
 	.cm_clkmode_dpll_per			= 0x4a008140,
@@ -967,4 +972,7 @@ struct prcm_regs const dra7xx_prcm = {
 	.prm_vc_val_bypass			= 0x4ae07da0,
 	.prm_vc_cfg_i2c_mode			= 0x4ae07db4,
 	.prm_vc_cfg_i2c_clk			= 0x4ae07db8,
+
+	.prm_abbldo_mpu_setup			= 0x4AE07DDC,
+	.prm_abbldo_mpu_ctrl			= 0x4AE07DE0,
 };
diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c
index 2e1870609a4..16a91f911a0 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/cpu/armv7/omap5/sdram.c
@@ -245,6 +245,7 @@ static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
 		*regs = &emif_regs_ddr3_532_mhz_1cs_es2;
 		break;
 	case DRA752_ES1_0:
+	case DRA752_ES1_1:
 		switch (emif_nr) {
 		case 1:
 			*regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1;
@@ -273,6 +274,7 @@ static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
 		*dmm_lisa_regs = &lisa_map_4G_x_2_x_2;
 		break;
 	case DRA752_ES1_0:
+	case DRA752_ES1_1:
 	default:
 		*dmm_lisa_regs = &lisa_map_2G_x_2_x_2_2G_x_1_x_2;
 	}
@@ -460,6 +462,7 @@ static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr,
 		*size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es2);
 		break;
 	case DRA752_ES1_0:
+	case DRA752_ES1_1:
 		if (emif_nr == 1) {
 			*regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif1;
 			*size =
@@ -626,6 +629,7 @@ const struct read_write_regs *get_bug_regs(u32 *iterations)
 			     sizeof(omap5_bug_00339_regs[0]);
 		break;
 	case DRA752_ES1_0:
+	case DRA752_ES1_1:
 		bug_00339_regs_ptr = dra_bug_00339_regs;
 		*iterations = sizeof(dra_bug_00339_regs)/
 			     sizeof(dra_bug_00339_regs[0]);
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index c1777dfdc96..fbe599d1ab3 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -43,7 +43,7 @@
 #define MT47H128M16RT25E_IOCTRL_VALUE		0x18B
 
 /* Micron MT41J128M16JT-125 */
-#define MT41J128MJT125_EMIF_READ_LATENCY	0x06
+#define MT41J128MJT125_EMIF_READ_LATENCY	0x100006
 #define MT41J128MJT125_EMIF_TIM1		0x0888A39B
 #define MT41J128MJT125_EMIF_TIM2		0x26337FDA
 #define MT41J128MJT125_EMIF_TIM3		0x501F830F
@@ -65,7 +65,7 @@
 #define MT41J256MJT125_EMIF_SDCFG		0x61C04B32
 
 /* Micron MT41J256M8HX-15E */
-#define MT41J256M8HX15E_EMIF_READ_LATENCY	0x06
+#define MT41J256M8HX15E_EMIF_READ_LATENCY	0x100006
 #define MT41J256M8HX15E_EMIF_TIM1		0x0888A39B
 #define MT41J256M8HX15E_EMIF_TIM2		0x26337FDA
 #define MT41J256M8HX15E_EMIF_TIM3		0x501F830F
@@ -97,7 +97,7 @@
 #define MT41K256M16HA125E_IOCTRL_VALUE		0x18B
 
 /* Micron MT41J512M8RH-125 on EVM v1.5 */
-#define MT41J512M8RH125_EMIF_READ_LATENCY	0x06
+#define MT41J512M8RH125_EMIF_READ_LATENCY	0x100006
 #define MT41J512M8RH125_EMIF_TIM1		0x0888A39B
 #define MT41J512M8RH125_EMIF_TIM2		0x26517FDA
 #define MT41J512M8RH125_EMIF_TIM3		0x501F84EF
@@ -113,7 +113,7 @@
 #define MT41J512M8RH125_IOCTRL_VALUE		0x18B
 
 /* Samsung K4B2G1646E-BIH9 */
-#define K4B2G1646EBIH9_EMIF_READ_LATENCY	0x07
+#define K4B2G1646EBIH9_EMIF_READ_LATENCY	0x100007
 #define K4B2G1646EBIH9_EMIF_TIM1		0x0AAAE51B
 #define K4B2G1646EBIH9_EMIF_TIM2		0x2A1D7FDA
 #define K4B2G1646EBIH9_EMIF_TIM3		0x501F83FF
diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h
index 65a5995020f..194b93bf56d 100644
--- a/arch/arm/include/asm/arch-omap3/omap3.h
+++ b/arch/arm/include/asm/arch-omap3/omap3.h
@@ -140,13 +140,13 @@ struct gpio {
 					 SRAM_OFFSET2)
 #define SRAM_CLK_CODE			(SRAM_VECT_CODE + 64)
 
-#define OMAP3_PUBLIC_SRAM_BASE		0x40208000 /* Works for GP & EMU */
-#define OMAP3_PUBLIC_SRAM_END		0x40210000
+#define NON_SECURE_SRAM_START		0x40208000 /* Works for GP & EMU */
+#define NON_SECURE_SRAM_END		0x40210000
 
 #define LOW_LEVEL_SRAM_STACK		0x4020FFFC
 
 /* scratch area - accessible on both EMU and GP */
-#define OMAP3_PUBLIC_SRAM_SCRATCH_AREA	OMAP3_PUBLIC_SRAM_BASE
+#define OMAP3_PUBLIC_SRAM_SCRATCH_AREA	NON_SECURE_SRAM_START
 
 #define DEBUG_LED1			149	/* gpio */
 #define DEBUG_LED2			150	/* gpio */
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index ce8217f6979..fc9472544d4 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -30,7 +30,6 @@ void watchdog_init(void);
 u32 get_device_type(void);
 void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
 void set_muxconf_regs_essential(void);
-void set_muxconf_regs_non_essential(void);
 void sr32(void *, u32, u32, u32);
 u32 wait_on_value(u32, u32, void *, u32);
 void sdelay(unsigned long);
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index 590235be098..19fdecec01b 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -44,6 +44,7 @@
 #define OMAP5432_CONTROL_ID_CODE_ES1_0		0x0B99802F
 #define OMAP5432_CONTROL_ID_CODE_ES2_0          0x1B99802F
 #define DRA752_CONTROL_ID_CODE_ES1_0		0x0B99002F
+#define DRA752_CONTROL_ID_CODE_ES1_1		0x1B99002F
 
 /* UART */
 #define UART1_BASE		(OMAP54XX_L4_PER_BASE + 0x6a000)
@@ -204,6 +205,8 @@ struct s32ktimer {
 /* ABB efuse masks */
 #define OMAP5_ABB_FUSE_VSET_MASK		(0x1F << 24)
 #define OMAP5_ABB_FUSE_ENABLE_MASK		(0x1 << 29)
+#define DRA7_ABB_FUSE_VSET_MASK			(0x1F << 20)
+#define DRA7_ABB_FUSE_ENABLE_MASK		(0x1 << 25)
 #define OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK	(0x1 << 10)
 #define OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK	(0x1f << 0)
 
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index 9e70d48f430..43011a4acd4 100644
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -31,7 +31,6 @@ void watchdog_init(void);
 u32 get_device_type(void);
 void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
 void set_muxconf_regs_essential(void);
-void set_muxconf_regs_non_essential(void);
 void sr32(void *, u32, u32, u32);
 u32 wait_on_value(u32, u32, void *, u32);
 void sdelay(unsigned long);
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index a78f99079b6..04925bca1cd 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -567,7 +567,6 @@ u32 omap_ddr_clk(void);
 u32 get_sys_clk_index(void);
 void enable_basic_clocks(void);
 void enable_basic_uboot_clocks(void);
-void enable_non_essential_clocks(void);
 void scale_vcores(struct vcores_data const *);
 u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic);
 void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic);
@@ -643,6 +642,7 @@ static inline u8 is_dra7xx(void)
 
 /* DRA7XX */
 #define DRA752_ES1_0	0x07520100
+#define DRA752_ES1_1	0x07520110
 
 /*
  * SRAM scratch space entries