Merge branch 'iu-boot/master' into 'u-boot-arm/master'

Conflicts:
	arch/arm/cpu/arm926ejs/mxs/Makefile
	board/compulab/cm_t35/Makefile
	board/corscience/tricorder/Makefile
	board/ppcag/bg0900/Makefile
	drivers/bootcount/Makefile
	include/configs/omap4_common.h
	include/configs/pdnb3.h

Makefile conflicts are due to additions/removals of
object files on the ARM branch vs KBuild introduction
on the main branch. Resolution consists in adjusting
the list of object files in the main branch version.
This also applies to two files which are not listed
as conflicting but had to be modified:

	board/compulab/common/Makefile
	board/udoo/Makefile

include/configs/omap4_common.h conflicts are due to
the OMAP4 conversion to ti_armv7_common.h on the ARM
side, and CONFIG_SYS_HZ removal on the main side.
Resolution is to convert as this icludes removal of
CONFIG_SYS_HZ.

include/configs/pdnb3.h is due to a removal on ARM side.
Trivial resolution is to remove the file.

Note: 'git show' will also list two files just because
they are new:

	include/configs/am335x_igep0033.h
	include/configs/omap3_igep00x0.h

20 files changed, 149 insertions, 93 deletions

diff --git a/arch/arm/cpu/arm926ejs/mxs/Makefile b/arch/arm/cpu/arm926ejs/mxs/Makefile
index 13b5a545226..152546eb417 100644
--- a/arch/arm/cpu/arm926ejs/mxs/Makefile
+++ b/arch/arm/cpu/arm926ejs/mxs/Makefile
@@ -14,11 +14,11 @@ obj-y	+= spl_boot.o spl_lradc_init.o spl_mem_init.o spl_power_init.o
 endif
 
 # Specify the target for use in elftosb call
-ELFTOSB_TARGET-$(CONFIG_MX23) = imx23
-ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
+MKIMAGE_TARGET-$(CONFIG_MX23) = mx23
+MKIMAGE_TARGET-$(CONFIG_MX28) = mx28
 
-$(OBJTREE)/u-boot.bd: $(SRCTREE)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd
+$(OBJTREE)/mxsimage.cfg: $(SRCTREE)/$(CPUDIR)/$(SOC)/mxsimage.$(MKIMAGE_TARGET-y).cfg
 	sed "s@OBJTREE@$(OBJTREE)@g" $^ > $@
 
-$(OBJTREE)/u-boot.sb: $(OBJTREE)/u-boot.bin $(OBJTREE)/spl/u-boot-spl.bin $(OBJTREE)/u-boot.bd
-		elftosb -zf $(ELFTOSB_TARGET-y) -c $(OBJTREE)/u-boot.bd -o $(OBJTREE)/u-boot.sb
+$(OBJTREE)/u-boot.sb: $(OBJTREE)/u-boot.bin $(OBJTREE)/spl/u-boot-spl.bin $(OBJTREE)/mxsimage.cfg
+	$(OBJTREE)/tools/mkimage -n $(OBJTREE)/mxsimage.cfg -T mxsimage $@
diff --git a/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg b/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg
index 811876736c2..c9cf4b36294 100644
--- a/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg
+++ b/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg
@@ -1,6 +1,6 @@
 SECTION 0x0 BOOTABLE
  TAG LAST
- LOAD     0x0        spl/u-boot-spl.bin
+ LOAD     0x0        OBJTREE/spl/u-boot-spl.bin
  CALL     0x14       0x0
- LOAD     0x40000100 u-boot.bin
+ LOAD     0x40000100 OBJTREE/u-boot.bin
  CALL     0x40000100 0x0
diff --git a/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg b/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg
index ea772f0c869..676f5c8f77e 100644
--- a/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg
+++ b/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg
@@ -1,8 +1,8 @@
 SECTION 0x0 BOOTABLE
  TAG LAST
- LOAD     0x0        spl/u-boot-spl.bin
+ LOAD     0x0        OBJTREE/spl/u-boot-spl.bin
  LOAD IVT 0x8000     0x14
  CALL HAB 0x8000     0x0
- LOAD     0x40000100 u-boot.bin
+ LOAD     0x40000100 OBJTREE/u-boot.bin
  LOAD IVT 0x8000     0x40000100
  CALL HAB 0x8000     0x0
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
index 8ea45be1d25..d25019a51ef 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
@@ -654,6 +654,8 @@ static void mxs_batt_boot(void)
 	clrsetbits_le32(&power_regs->hw_power_5vctrl,
 		POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
 		0x8 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
+
+	mxs_power_enable_4p2();
 }
 
 /**
diff --git a/arch/arm/cpu/arm926ejs/mxs/start.S b/arch/arm/cpu/arm926ejs/mxs/start.S
index 3e454ae1bca..5de2bad5844 100644
--- a/arch/arm/cpu/arm926ejs/mxs/start.S
+++ b/arch/arm/cpu/arm926ejs/mxs/start.S
@@ -150,6 +150,15 @@ IRQ_STACK_START_IN:
 
 _reset:
 	/*
+	 * If the CPU is configured in "Wait JTAG connection mode", the stack
+	 * pointer is not configured and is zero. This will cause crash when
+	 * trying to push data onto stack right below here. Load the SP and make
+	 * it point to the end of OCRAM if the SP is zero.
+	 */
+	cmp	sp, #0x00000000
+	ldreq	sp, =CONFIG_SYS_INIT_SP_ADDR
+
+	/*
 	 * Store all registers on old stack pointer, this will allow us later to
 	 * return to the BootROM and let the BootROM load U-Boot into RAM.
 	 *
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index a31bf40e5b3..453effa541a 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -32,6 +32,7 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/musb.h>
 #include <asm/omap_musb.h>
+#include <asm/davinci_rtc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -150,15 +151,15 @@ __weak void am33xx_spl_board_init(void)
 
 static void rtc32k_enable(void)
 {
-	struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
+	struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
 
 	/*
 	 * Unlock the RTC's registers.  For more details please see the
 	 * RTC_SS section of the TRM.  In order to unlock we need to
 	 * write these specific values (keys) in this order.
 	 */
-	writel(0x83e70b13, &rtc->kick0r);
-	writel(0x95a4f1e0, &rtc->kick1r);
+	writel(RTC_KICK0R_WE, &rtc->kick0r);
+	writel(RTC_KICK1R_WE, &rtc->kick1r);
 
 	/* Enable the RTC 32K OSC by setting bits 3 and 6. */
 	writel((1 << 3) | (1 << 6), &rtc->osc);
diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
index 25fadf64875..f5bc6728b7c 100644
--- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
@@ -45,6 +45,12 @@
 #endif
 
 	mcr 15, 1, r0, c9, c0, 2
+
+	/* enable L2 cache */
+	mrc 15, 0, r0, c1, c0, 1
+	orr r0, r0, #2
+	mcr 15, 0, r0, c1, c0, 1
+
 .endm /* init_l2cc */
 
 /* AIPS setup - Only setup MPROTx registers.
@@ -369,12 +375,6 @@ setup_pll_func:
 #endif	/* CONFIG_MX53 */
 .endm
 
-.macro setup_wdog
-	ldr r0, =WDOG1_BASE_ADDR
-	mov r1, #0x30
-	strh r1, [r0]
-.endm
-
 ENTRY(lowlevel_init)
 	mov r10, lr
 	mov r4, #0	/* Fix R4 to 0 */
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index cf3a38e8139..873d9d0fd87 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -100,6 +100,32 @@ static u32 decode_pll(enum pll_clocks pll, u32 infreq)
 	}
 	/* NOTREACHED */
 }
+static u32 mxc_get_pll_pfd(enum pll_clocks pll, int pfd_num)
+{
+	u32 div;
+	u64 freq;
+
+	switch (pll) {
+	case PLL_BUS:
+		if (pfd_num == 3) {
+			/* No PFD3 on PPL2 */
+			return 0;
+		}
+		div = __raw_readl(&imx_ccm->analog_pfd_528);
+		freq = (u64)decode_pll(PLL_BUS, MXC_HCLK);
+		break;
+	case PLL_USBOTG:
+		div = __raw_readl(&imx_ccm->analog_pfd_480);
+		freq = (u64)decode_pll(PLL_USBOTG, MXC_HCLK);
+		break;
+	default:
+		/* No PFD on other PLL					     */
+		return 0;
+	}
+
+	return (freq * 18) / ((div & ANATOP_PFD_FRAC_MASK(pfd_num)) >>
+			      ANATOP_PFD_FRAC_SHIFT(pfd_num));
+}
 
 static u32 get_mcu_main_clk(void)
 {
@@ -144,13 +170,14 @@ u32 get_periph_clk(void)
 			freq = decode_pll(PLL_BUS, MXC_HCLK);
 			break;
 		case 1:
-			freq = PLL2_PFD2_FREQ;
+			freq = mxc_get_pll_pfd(PLL_BUS, 2);
 			break;
 		case 2:
-			freq = PLL2_PFD0_FREQ;
+			freq = mxc_get_pll_pfd(PLL_BUS, 0);
 			break;
 		case 3:
-			freq = PLL2_PFD2_DIV_FREQ;
+			/* static / 2 divider */
+			freq = mxc_get_pll_pfd(PLL_BUS, 2) / 2;
 			break;
 		default:
 			break;
@@ -184,7 +211,7 @@ static u32 get_ipg_per_clk(void)
 static u32 get_uart_clk(void)
 {
 	u32 reg, uart_podf;
-	u32 freq = PLL3_80M;
+	u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */
 	reg = __raw_readl(&imx_ccm->cscdr1);
 #ifdef CONFIG_MX6SL
 	if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
@@ -204,7 +231,7 @@ static u32 get_cspi_clk(void)
 	reg &= MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK;
 	cspi_podf = reg >> MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
 
-	return	PLL3_60M / (cspi_podf + 1);
+	return	decode_pll(PLL_USBOTG, MXC_HCLK) / (8 * (cspi_podf + 1));
 }
 
 static u32 get_axi_clk(void)
@@ -217,9 +244,9 @@ static u32 get_axi_clk(void)
 
 	if (cbcdr & MXC_CCM_CBCDR_AXI_SEL) {
 		if (cbcdr & MXC_CCM_CBCDR_AXI_ALT_SEL)
-			root_freq = PLL2_PFD2_FREQ;
+			root_freq = mxc_get_pll_pfd(PLL_BUS, 2);
 		else
-			root_freq = PLL3_PFD1_FREQ;
+			root_freq = mxc_get_pll_pfd(PLL_USBOTG, 1);
 	} else
 		root_freq = get_periph_clk();
 
@@ -244,10 +271,10 @@ static u32 get_emi_slow_clk(void)
 		root_freq = decode_pll(PLL_USBOTG, MXC_HCLK);
 		break;
 	case 2:
-		root_freq = PLL2_PFD2_FREQ;
+		root_freq =  mxc_get_pll_pfd(PLL_BUS, 2);
 		break;
 	case 3:
-		root_freq = PLL2_PFD0_FREQ;
+		root_freq =  mxc_get_pll_pfd(PLL_BUS, 0);
 		break;
 	}
 
@@ -270,13 +297,14 @@ static u32 get_mmdc_ch0_clk(void)
 		freq = decode_pll(PLL_BUS, MXC_HCLK);
 		break;
 	case 1:
-		freq = PLL2_PFD2_FREQ;
+		freq = mxc_get_pll_pfd(PLL_BUS, 2);
 		break;
 	case 2:
-		freq = PLL2_PFD0_FREQ;
+		freq = mxc_get_pll_pfd(PLL_BUS, 0);
 		break;
 	case 3:
-		freq = PLL2_PFD2_DIV_FREQ;
+		/* static / 2 divider */
+		freq =  mxc_get_pll_pfd(PLL_BUS, 2) / 2;
 	}
 
 	return freq / (podf + 1);
@@ -359,9 +387,9 @@ static u32 get_usdhc_clk(u32 port)
 	}
 
 	if (clk_sel)
-		root_freq = PLL2_PFD0_FREQ;
+		root_freq = mxc_get_pll_pfd(PLL_BUS, 0);
 	else
-		root_freq = PLL2_PFD2_FREQ;
+		root_freq = mxc_get_pll_pfd(PLL_BUS, 2);
 
 	return root_freq / (usdhc_podf + 1);
 }
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index 0ffa03ac01a..69fff323d36 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -14,6 +14,7 @@
 #include <asm/arch/omap.h>
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/sys_proto.h>
+#include <watchdog.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -76,6 +77,9 @@ void spl_board_init(void)
 #if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT)
 	arch_misc_init();
 #endif
+#if defined(CONFIG_HW_WATCHDOG)
+	hw_watchdog_init();
+#endif
 #ifdef CONFIG_AM33XX
 	am33xx_spl_board_init();
 #endif
diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c
index 49149861f87..2bb38438ae4 100644
--- a/arch/arm/cpu/armv7/zynq/cpu.c
+++ b/arch/arm/cpu/armv7/zynq/cpu.c
@@ -11,6 +11,10 @@
 
 void lowlevel_init(void)
 {
+}
+
+int arch_cpu_init(void)
+{
 	zynq_slcr_unlock();
 	/* remap DDR to zero, FILTERSTART */
 	writel(0, &scu_base->filter_start);
@@ -31,6 +35,8 @@ void lowlevel_init(void)
 	writel(0xC, &slcr_base->ddr_urgent);
 
 	zynq_slcr_lock();
+
+	return 0;
 }
 
 void reset_cpu(ulong addr)
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
index 52fa128af90..05752ce689c 100644
--- a/arch/arm/include/asm/arch-am33xx/cpu.h
+++ b/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -457,15 +457,6 @@ struct gptimer {
 	unsigned int tcar2;		/* offset 0x58 */
 };
 
-/* RTC Registers */
-struct rtc_regs {
-	unsigned int res[21];
-	unsigned int osc;		/* offset 0x54 */
-	unsigned int res2[5];
-	unsigned int kick0r;		/* offset 0x6c */
-	unsigned int kick1r;		/* offset 0x70 */
-};
-
 /* UART Registers */
 struct uart_sys {
 	unsigned int resv1[21];
diff --git a/arch/arm/include/asm/arch-at91/at91_pmc.h b/arch/arm/include/asm/arch-at91/at91_pmc.h
index 003920cd84b..7b36f74f831 100644
--- a/arch/arm/include/asm/arch-at91/at91_pmc.h
+++ b/arch/arm/include/asm/arch-at91/at91_pmc.h
@@ -233,6 +233,8 @@ typedef struct at91_pmc {
 #endif
 #define		AT91_PMC_USBS_USB_PLLA		(0x0)		/* USB Clock Input is PLLA */
 #define		AT91_PMC_USBS_USB_UPLL		(0x1)		/* USB Clock Input is UPLL */
+#define		AT91_PMC_USBS_USB_PLLB		(0x1)		/* USB Clock Input is PLLB, AT91SAM9N12 only */
+#define		AT91_PMC_USB_DIV_2		(0x1 <<  8)	/* USB Clock divided by 2 */
 #define		AT91_PMC_USBDIV_8		(0x7 <<  8)	/* USB Clock divided by 8 */
 #define		AT91_PMC_USBDIV_10		(0x9 <<  8)	/* USB Clock divided by 10 */
 
diff --git a/arch/arm/include/asm/arch-at91/at91_rstc.h b/arch/arm/include/asm/arch-at91/at91_rstc.h
index 423cf515d97..a9423428e75 100644
--- a/arch/arm/include/asm/arch-at91/at91_rstc.h
+++ b/arch/arm/include/asm/arch-at91/at91_rstc.h
@@ -38,4 +38,11 @@ typedef struct at91_rstc {
 
 #define AT91_RSTC_SR_NRSTL	0x00010000
 
+#define AT91_RSTC_RSTTYP		(7 << 8)	/* Reset Type */
+#define AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
+#define AT91_RSTC_RSTTYP_WAKEUP	(1 << 8)
+#define AT91_RSTC_RSTTYP_WATCHDOG	(2 << 8)
+#define AT91_RSTC_RSTTYP_SOFTWARE	(3 << 8)
+#define AT91_RSTC_RSTTYP_USER		(4 << 8)
+
 #endif
diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h
index 05ecc787685..7aaf4bff851 100644
--- a/arch/arm/include/asm/arch-davinci/hardware.h
+++ b/arch/arm/include/asm/arch-davinci/hardware.h
@@ -613,42 +613,4 @@ static inline enum davinci_clk_ids get_async3_src(void)
 
 #endif
 
-struct davinci_rtc {
-	dv_reg	second;
-	dv_reg	minutes;
-	dv_reg	hours;
-	dv_reg	day;
-	dv_reg	month; /* 0x10 */
-	dv_reg	year;
-	dv_reg	dotw;
-	dv_reg	resv1;
-	dv_reg	alarmsecond; /* 0x20 */
-	dv_reg	alarmminute;
-	dv_reg	alarmhour;
-	dv_reg	alarmday;
-	dv_reg	alarmmonth; /* 0x30 */
-	dv_reg	alarmyear;
-	dv_reg	resv2[2];
-	dv_reg	ctrl; /* 0x40 */
-	dv_reg	status;
-	dv_reg	irq;
-	dv_reg	complsb;
-	dv_reg	compmsb; /* 0x50 */
-	dv_reg	osc;
-	dv_reg	resv3[2];
-	dv_reg	scratch0; /* 0x60 */
-	dv_reg	scratch1;
-	dv_reg	scratch2;
-	dv_reg	kick0r;
-	dv_reg	kick1r; /* 0x70 */
-};
-
-#define RTC_STATE_BUSY	0x01
-#define RTC_STATE_RUN	0x02
-
-#define RTC_KICK0R_WE	0x83e70b13
-#define RTC_KICK1R_WE	0x95a4f1e0
-
-#define davinci_rtc_base ((struct davinci_rtc *)DAVINCI_RTC_BASE)
-
 #endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h
index 2813593e25b..720207303b0 100644
--- a/arch/arm/include/asm/arch-mx6/crm_regs.h
+++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
@@ -890,15 +890,4 @@ struct mxc_ccm_reg {
 #define BF_ANADIG_PFD_528_PFD0_FRAC(v)  \
 	(((v) << 0) & BM_ANADIG_PFD_528_PFD0_FRAC)
 
-#define PLL2_PFD0_FREQ		352000000
-#define PLL2_PFD1_FREQ		594000000
-#define PLL2_PFD2_FREQ		396000000
-#define PLL2_PFD2_DIV_FREQ	200000000
-#define PLL3_PFD0_FREQ		720000000
-#define PLL3_PFD1_FREQ		540000000
-#define PLL3_PFD2_FREQ		508200000
-#define PLL3_PFD3_FREQ		454700000
-#define PLL3_80M		80000000
-#define PLL3_60M		60000000
-
 #endif /*__ARCH_ARM_MACH_MX6_CCM_REGS_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
index b5df68afc62..73734078e99 100644
--- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
@@ -210,7 +210,7 @@ enum {
 	MX6_PAD_DI0_PIN3__MMDC_MMDC_DEBUG_3	= IOMUX_PAD(0x03BC, 0x00A8, 6, 0x0000, 0, 0),
 	MX6_PAD_DI0_PIN3__PL301_SIM_MX6DL_PER1_HADDR_10	= IOMUX_PAD(0x03BC, 0x00A8, 7, 0x0000, 0, 0),
 	MX6_PAD_DI0_PIN3__LCDIF_CS		= IOMUX_PAD(0x03BC, 0x00A8, 8, 0x0000, 0, 0),
-	MX6_PAD_DI0_PIN4__IPU1_DI0_PIN4		= IOMUX_PAD(0x03C0, 0x00AC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+	MX6_PAD_DI0_PIN4__IPU1_DI0_PIN4		= IOMUX_PAD(0x03C0, 0x00AC, 0, 0x0000, 0, 0),
 	MX6_PAD_DI0_PIN4__LCDIF_BUSY		= IOMUX_PAD(0x03C0, 0x00AC, 1, 0x08D8, 1, 0),
 	MX6_PAD_DI0_PIN4__AUDMUX_AUD6_RXD	= IOMUX_PAD(0x03C0, 0x00AC, 2, 0x0000, 0, 0),
 	MX6_PAD_DI0_PIN4__USDHC1_WP		= IOMUX_PAD(0x03C0, 0x00AC, 3, 0x092C, 0, 0),
diff --git a/arch/arm/include/asm/arch-mxs/sys_proto.h b/arch/arm/include/asm/arch-mxs/sys_proto.h
index 43c7dd6bf10..09dfc90a9b0 100644
--- a/arch/arm/include/asm/arch-mxs/sys_proto.h
+++ b/arch/arm/include/asm/arch-mxs/sys_proto.h
@@ -46,6 +46,7 @@ static const struct mxs_pair mxs_boot_modes[] = {
 	{ 0x02, 0x1f, "SSP SPI #1, master, NOR" },
 	{ 0x03, 0x1f, "SSP SPI #2, master, NOR" },
 	{ 0x04, 0x1f, "NAND" },
+	{ 0x06, 0x1f, "JTAG" },
 	{ 0x08, 0x1f, "SSP SPI #3, master, EEPROM" },
 	{ 0x09, 0x1f, "SSP SD/MMC #0" },
 	{ 0x0a, 0x1f, "SSP SD/MMC #1" },
@@ -60,6 +61,7 @@ static const struct mxs_pair mxs_boot_modes[] = {
 	{ 0x13, 0x1f, "SSP SPI #3, master, 1V8 NOR" },
 	{ 0x04, 0x1f, "NAND, 3V3" },
 	{ 0x14, 0x1f, "NAND, 1V8" },
+	{ 0x06, 0x1f, "JTAG" },
 	{ 0x08, 0x1f, "SSP SPI #3, master, 3V3 EEPROM" },
 	{ 0x18, 0x1f, "SSP SPI #3, master, 1V8 EEPROM" },
 	{ 0x09, 0x1f, "SSP SD/MMC #0, 3V3" },
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index 414d37a5a7e..3c2306fe37a 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -145,9 +145,9 @@ struct s32ktimer {
 #define DDR_IO_2_VREF_CELLS_DDR3_VALUE				0x0
 
 #define DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x7C7C7C7C
-#define DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x64656465
+#define DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x64646464
 #define DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2 0xBAE8C631
-#define DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2 0xB46318D8
+#define DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2 0xBC6318DC
 #define DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2 0x84210000
 
 #define EFUSE_1 0x45145100
diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h
index 57f0de5ffe4..2d5a62e6603 100644
--- a/arch/arm/include/asm/arch-omap5/spl.h
+++ b/arch/arm/include/asm/arch-omap5/spl.h
@@ -16,6 +16,7 @@
 #define BOOT_DEVICE_MMC2        6
 #define BOOT_DEVICE_MMC2_2	7
 #define BOOT_DEVICE_SPI		10
+#define BOOT_DEVICE_UART	0x43
 
 #define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
 #define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2_2
diff --git a/arch/arm/include/asm/davinci_rtc.h b/arch/arm/include/asm/davinci_rtc.h
new file mode 100644
index 00000000000..575b5908886
--- /dev/null
+++ b/arch/arm/include/asm/davinci_rtc.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Based on:
+ *
+ * -------------------------------------------------------------------------
+ *
+ *  linux/include/asm-arm/arch-davinci/hardware.h
+ *
+ *  Copyright (C) 2006 Texas Instruments.
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+#ifndef __ASM_DAVINCI_RTC_H
+#define __ASM_DAVINCI_RTC_H
+
+struct davinci_rtc {
+	unsigned int	second;
+	unsigned int	minutes;
+	unsigned int	hours;
+	unsigned int	day;
+	unsigned int	month; /* 0x10 */
+	unsigned int	year;
+	unsigned int	dotw;
+	unsigned int	resv1;
+	unsigned int	alarmsecond; /* 0x20 */
+	unsigned int	alarmminute;
+	unsigned int	alarmhour;
+	unsigned int	alarmday;
+	unsigned int	alarmmonth; /* 0x30 */
+	unsigned int	alarmyear;
+	unsigned int	resv2[2];
+	unsigned int	ctrl; /* 0x40 */
+	unsigned int	status;
+	unsigned int	irq;
+	unsigned int	complsb;
+	unsigned int	compmsb; /* 0x50 */
+	unsigned int	osc;
+	unsigned int	resv3[2];
+	unsigned int	scratch0; /* 0x60 */
+	unsigned int	scratch1;
+	unsigned int	scratch2;
+	unsigned int	kick0r;
+	unsigned int	kick1r; /* 0x70 */
+};
+
+#define RTC_STATE_BUSY	0x01
+#define RTC_STATE_RUN	0x02
+
+#define RTC_KICK0R_WE	0x83e70b13
+#define RTC_KICK1R_WE	0x95a4f1e0
+#endif