diff options
| author | Graeme Russ <graeme.russ@gmail.com> | 2011-04-13 19:43:28 +1000 |
|---|---|---|
| committer | Graeme Russ <graeme.russ@gmail.com> | 2011-04-13 19:43:28 +1000 |
| commit | fea25720013f84427a0ba8833a38614fcaf488ba (patch) | |
| tree | 59399e99054261e245a1f2f2dbb478adad1d49ab /arch/x86/include/asm | |
| parent | dbf7115a326fa70ac3e4ca87497c7e21c6642b45 (diff) | |
x86: Rename i386 to x86
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Diffstat (limited to 'arch/x86/include/asm')
30 files changed, 2512 insertions, 0 deletions
diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h new file mode 100644 index 00000000000..c7a38f237a5 --- /dev/null +++ b/arch/x86/include/asm/bitops.h @@ -0,0 +1,384 @@ +#ifndef _I386_BITOPS_H +#define _I386_BITOPS_H + +/* + * Copyright 1992, Linus Torvalds. + */ + + +/* + * These have to be done with inline assembly: that way the bit-setting + * is guaranteed to be atomic. All bit operations return 0 if the bit + * was cleared before the operation and != 0 if it was not. + * + * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). + */ + +#ifdef CONFIG_SMP +#define LOCK_PREFIX "lock ; " +#else +#define LOCK_PREFIX "" +#endif + +#define ADDR (*(volatile long *) addr) + +/** + * set_bit - Atomically set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * This function is atomic and may not be reordered. See __set_bit() + * if you do not require the atomic guarantees. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static __inline__ void set_bit(int nr, volatile void * addr) +{ + __asm__ __volatile__( LOCK_PREFIX + "btsl %1,%0" + :"=m" (ADDR) + :"Ir" (nr)); +} + +/** + * __set_bit - Set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * Unlike set_bit(), this function is non-atomic and may be reordered. + * If it's called on the same region of memory simultaneously, the effect + * may be that only one operation succeeds. + */ +static __inline__ void __set_bit(int nr, volatile void * addr) +{ + __asm__( + "btsl %1,%0" + :"=m" (ADDR) + :"Ir" (nr)); +} + +/** + * clear_bit - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * clear_bit() is atomic and may not be reordered. However, it does + * not contain a memory barrier, so if it is used for locking purposes, + * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * in order to ensure changes are visible on other processors. + */ +static __inline__ void clear_bit(int nr, volatile void * addr) +{ + __asm__ __volatile__( LOCK_PREFIX + "btrl %1,%0" + :"=m" (ADDR) + :"Ir" (nr)); +} +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +/** + * __change_bit - Toggle a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * Unlike change_bit(), this function is non-atomic and may be reordered. + * If it's called on the same region of memory simultaneously, the effect + * may be that only one operation succeeds. + */ +static __inline__ void __change_bit(int nr, volatile void * addr) +{ + __asm__ __volatile__( + "btcl %1,%0" + :"=m" (ADDR) + :"Ir" (nr)); +} + +/** + * change_bit - Toggle a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * change_bit() is atomic and may not be reordered. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static __inline__ void change_bit(int nr, volatile void * addr) +{ + __asm__ __volatile__( LOCK_PREFIX + "btcl %1,%0" + :"=m" (ADDR) + :"Ir" (nr)); +} + +/** + * test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static __inline__ int test_and_set_bit(int nr, volatile void * addr) +{ + int oldbit; + + __asm__ __volatile__( LOCK_PREFIX + "btsl %2,%1\n\tsbbl %0,%0" + :"=r" (oldbit),"=m" (ADDR) + :"Ir" (nr) : "memory"); + return oldbit; +} + +/** + * __test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is non-atomic and can be reordered. + * If two examples of this operation race, one can appear to succeed + * but actually fail. You must protect multiple accesses with a lock. + */ +static __inline__ int __test_and_set_bit(int nr, volatile void * addr) +{ + int oldbit; + + __asm__( + "btsl %2,%1\n\tsbbl %0,%0" + :"=r" (oldbit),"=m" (ADDR) + :"Ir" (nr)); + return oldbit; +} + +/** + * test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static __inline__ int test_and_clear_bit(int nr, volatile void * addr) +{ + int oldbit; + + __asm__ __volatile__( LOCK_PREFIX + "btrl %2,%1\n\tsbbl %0,%0" + :"=r" (oldbit),"=m" (ADDR) + :"Ir" (nr) : "memory"); + return oldbit; +} + +/** + * __test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is non-atomic and can be reordered. + * If two examples of this operation race, one can appear to succeed + * but actually fail. You must protect multiple accesses with a lock. + */ +static __inline__ int __test_and_clear_bit(int nr, volatile void * addr) +{ + int oldbit; + + __asm__( + "btrl %2,%1\n\tsbbl %0,%0" + :"=r" (oldbit),"=m" (ADDR) + :"Ir" (nr)); + return oldbit; +} + +/* WARNING: non atomic and it can be reordered! */ +static __inline__ int __test_and_change_bit(int nr, volatile void * addr) +{ + int oldbit; + + __asm__ __volatile__( + "btcl %2,%1\n\tsbbl %0,%0" + :"=r" (oldbit),"=m" (ADDR) + :"Ir" (nr) : "memory"); + return oldbit; +} + +/** + * test_and_change_bit - Change a bit and return its new value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static __inline__ int test_and_change_bit(int nr, volatile void * addr) +{ + int oldbit; + + __asm__ __volatile__( LOCK_PREFIX + "btcl %2,%1\n\tsbbl %0,%0" + :"=r" (oldbit),"=m" (ADDR) + :"Ir" (nr) : "memory"); + return oldbit; +} + +#if 0 /* Fool kernel-doc since it doesn't do macros yet */ +/** + * test_bit - Determine whether a bit is set + * @nr: bit number to test + * @addr: Address to start counting from + */ +static int test_bit(int nr, const volatile void * addr); +#endif + +static __inline__ int constant_test_bit(int nr, const volatile void * addr) +{ + return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0; +} + +static __inline__ int variable_test_bit(int nr, volatile void * addr) +{ + int oldbit; + + __asm__ __volatile__( + "btl %2,%1\n\tsbbl %0,%0" + :"=r" (oldbit) + :"m" (ADDR),"Ir" (nr)); + return oldbit; +} + +#define test_bit(nr,addr) \ +(__builtin_constant_p(nr) ? \ + constant_test_bit((nr),(addr)) : \ + variable_test_bit((nr),(addr))) + +/** + * find_first_zero_bit - find the first zero bit in a memory region + * @addr: The address to start the search at + * @size: The maximum size to search + * + * Returns the bit-number of the first zero bit, not the number of the byte + * containing a bit. + */ +static __inline__ int find_first_zero_bit(void * addr, unsigned size) +{ + int d0, d1, d2; + int res; + + if (!size) + return 0; + /* This looks at memory. Mark it volatile to tell gcc not to move it around */ + __asm__ __volatile__( + "movl $-1,%%eax\n\t" + "xorl %%edx,%%edx\n\t" + "repe; scasl\n\t" + "je 1f\n\t" + "xorl -4(%%edi),%%eax\n\t" + "subl $4,%%edi\n\t" + "bsfl %%eax,%%edx\n" + "1:\tsubl %%ebx,%%edi\n\t" + "shll $3,%%edi\n\t" + "addl %%edi,%%edx" + :"=d" (res), "=&c" (d0), "=&D" (d1), "=&a" (d2) + :"1" ((size + 31) >> 5), "2" (addr), "b" (addr)); + return res; +} + +/** + * find_next_zero_bit - find the first zero bit in a memory region + * @addr: The address to base the search on + * @offset: The bitnumber to start searching at + * @size: The maximum size to search + */ +static __inline__ int find_next_zero_bit (void * addr, int size, int offset) +{ + unsigned long * p = ((unsigned long *) addr) + (offset >> 5); + int set = 0, bit = offset & 31, res; + + if (bit) { + /* + * Look for zero in first byte + */ + __asm__("bsfl %1,%0\n\t" + "jne 1f\n\t" + "movl $32, %0\n" + "1:" + : "=r" (set) + : "r" (~(*p >> bit))); + if (set < (32 - bit)) + return set + offset; + set = 32 - bit; + p++; + } + /* + * No zero yet, search remaining full bytes for a zero + */ + res = find_first_zero_bit (p, size - 32 * (p - (unsigned long *) addr)); + return (offset + set + res); +} + +/** + * ffz - find first zero in word. + * @word: The word to search + * + * Undefined if no zero exists, so code should check against ~0UL first. + */ +static __inline__ unsigned long ffz(unsigned long word) +{ + __asm__("bsfl %1,%0" + :"=r" (word) + :"r" (~word)); + return word; +} + +#ifdef __KERNEL__ + +/** + * ffs - find first bit set + * @x: the word to search + * + * This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ +static __inline__ int ffs(int x) +{ + int r; + + __asm__("bsfl %1,%0\n\t" + "jnz 1f\n\t" + "movl $-1,%0\n" + "1:" : "=r" (r) : "g" (x)); + return r+1; +} +#define PLATFORM_FFS + +/** + * hweightN - returns the hamming weight of a N-bit word + * @x: the word to weigh + * + * The Hamming Weight of a number is the total number of bits set in it. + */ + +#define hweight32(x) generic_hweight32(x) +#define hweight16(x) generic_hweight16(x) +#define hweight8(x) generic_hweight8(x) + +#endif /* __KERNEL__ */ + +#ifdef __KERNEL__ + +#define ext2_set_bit __test_and_set_bit +#define ext2_clear_bit __test_and_clear_bit +#define ext2_test_bit test_bit +#define ext2_find_first_zero_bit find_first_zero_bit +#define ext2_find_next_zero_bit find_next_zero_bit + +/* Bitmap functions for the minix filesystem. */ +#define minix_test_and_set_bit(nr,addr) __test_and_set_bit(nr,addr) +#define minix_set_bit(nr,addr) __set_bit(nr,addr) +#define minix_test_and_clear_bit(nr,addr) __test_and_clear_bit(nr,addr) +#define minix_test_bit(nr,addr) test_bit(nr,addr) +#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size) + +#endif /* __KERNEL__ */ + +#endif /* _I386_BITOPS_H */ diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h new file mode 100644 index 00000000000..140095117e5 --- /dev/null +++ b/arch/x86/include/asm/bootparam.h @@ -0,0 +1,120 @@ +#ifndef _ASM_X86_BOOTPARAM_H +#define _ASM_X86_BOOTPARAM_H + +#include <linux/types.h> +#include <linux/screen_info.h> +#include <linux/apm_bios.h> +#include <linux/edd.h> +#include <asm/e820.h> +#include <asm/ist.h> +#include <asm/video/edid.h> + +/* setup data types */ +#define SETUP_NONE 0 +#define SETUP_E820_EXT 1 + +/* extensible setup data list node */ +struct setup_data { + __u64 next; + __u32 type; + __u32 len; + __u8 data[0]; +}; + +struct setup_header { + __u8 setup_sects; + __u16 root_flags; + __u32 syssize; + __u16 ram_size; +#define RAMDISK_IMAGE_START_MASK 0x07FF +#define RAMDISK_PROMPT_FLAG 0x8000 +#define RAMDISK_LOAD_FLAG 0x4000 + __u16 vid_mode; + __u16 root_dev; + __u16 boot_flag; + __u16 jump; + __u32 header; + __u16 version; + __u32 realmode_swtch; + __u16 start_sys; + __u16 kernel_version; + __u8 type_of_loader; + __u8 loadflags; +#define LOADED_HIGH (1<<0) +#define QUIET_FLAG (1<<5) +#define KEEP_SEGMENTS (1<<6) +#define CAN_USE_HEAP (1<<7) + __u16 setup_move_size; + __u32 code32_start; + __u32 ramdisk_image; + __u32 ramdisk_size; + __u32 bootsect_kludge; + __u16 heap_end_ptr; + __u8 ext_loader_ver; + __u8 ext_loader_type; + __u32 cmd_line_ptr; + __u32 initrd_addr_max; + __u32 kernel_alignment; + __u8 relocatable_kernel; + __u8 _pad2[3]; + __u32 cmdline_size; + __u32 hardware_subarch; + __u64 hardware_subarch_data; + __u32 payload_offset; + __u32 payload_length; + __u64 setup_data; +} __attribute__((packed)); + +struct sys_desc_table { + __u16 length; + __u8 table[14]; +}; + +struct efi_info { + __u32 efi_loader_signature; + __u32 efi_systab; + __u32 efi_memdesc_size; + __u32 efi_memdesc_version; + __u32 efi_memmap; + __u32 efi_memmap_size; + __u32 efi_systab_hi; + __u32 efi_memmap_hi; +}; + +/* The so-called "zeropage" */ +struct boot_params { + struct screen_info screen_info; /* 0x000 */ + struct apm_bios_info apm_bios_info; /* 0x040 */ + __u8 _pad2[4]; /* 0x054 */ + __u64 tboot_addr; /* 0x058 */ + struct ist_info ist_info; /* 0x060 */ + __u8 _pad3[16]; /* 0x070 */ + __u8 hd0_info[16]; /* obsolete! */ /* 0x080 */ + __u8 hd1_info[16]; /* obsolete! */ /* 0x090 */ + struct sys_desc_table sys_desc_table; /* 0x0a0 */ + __u8 _pad4[144]; /* 0x0b0 */ + struct edid_info edid_info; /* 0x140 */ + struct efi_info efi_info; /* 0x1c0 */ + __u32 alt_mem_k; /* 0x1e0 */ + __u32 scratch; /* Scratch field! */ /* 0x1e4 */ + __u8 e820_entries; /* 0x1e8 */ + __u8 eddbuf_entries; /* 0x1e9 */ + __u8 edd_mbr_sig_buf_entries; /* 0x1ea */ + __u8 _pad6[6]; /* 0x1eb */ + struct setup_header hdr; /* setup header */ /* 0x1f1 */ + __u8 _pad7[0x290-0x1f1-sizeof(struct setup_header)]; + __u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX]; /* 0x290 */ + struct e820entry e820_map[E820MAX]; /* 0x2d0 */ + __u8 _pad8[48]; /* 0xcd0 */ + struct edd_info eddbuf[EDDMAXNR]; /* 0xd00 */ + __u8 _pad9[276]; /* 0xeec */ +} __attribute__((packed)); + +enum { + X86_SUBARCH_PC = 0, + X86_SUBARCH_LGUEST, + X86_SUBARCH_XEN, + X86_SUBARCH_MRST, + X86_NR_SUBARCHS, +}; +#endif /* _ASM_X86_BOOTPARAM_H */ diff --git a/arch/x86/include/asm/byteorder.h b/arch/x86/include/asm/byteorder.h new file mode 100644 index 00000000000..7dfeb8bbed2 --- /dev/null +++ b/arch/x86/include/asm/byteorder.h @@ -0,0 +1,43 @@ +#ifndef _I386_BYTEORDER_H +#define _I386_BYTEORDER_H + +#include <asm/types.h> + +#ifdef __GNUC__ + + +static __inline__ __u32 ___arch__swab32(__u32 x) +{ +#ifdef CONFIG_X86_BSWAP + __asm__("bswap %0" : "=r" (x) : "0" (x)); +#else + __asm__("xchgb %b0,%h0\n\t" /* swap lower bytes */ + "rorl $16,%0\n\t" /* swap words */ + "xchgb %b0,%h0" /* swap higher bytes */ + :"=q" (x) + : "0" (x)); +#endif + return x; +} + +static __inline__ __u16 ___arch__swab16(__u16 x) +{ + __asm__("xchgb %b0,%h0" /* swap bytes */ \ + : "=q" (x) \ + : "0" (x)); \ + return x; +} + +#define __arch__swab32(x) ___arch__swab32(x) +#define __arch__swab16(x) ___arch__swab16(x) + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#endif /* __GNUC__ */ + +#include <linux/byteorder/little_endian.h> + +#endif /* _I386_BYTEORDER_H */ diff --git a/arch/x86/include/asm/config.h b/arch/x86/include/asm/config.h new file mode 100644 index 00000000000..049c44eaf84 --- /dev/null +++ b/arch/x86/include/asm/config.h @@ -0,0 +1,24 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef _ASM_CONFIG_H_ +#define _ASM_CONFIG_H_ + +#endif diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h new file mode 100644 index 00000000000..d155ce9ceeb --- /dev/null +++ b/arch/x86/include/asm/e820.h @@ -0,0 +1,155 @@ +#ifndef _ASM_X86_E820_H +#define _ASM_X86_E820_H +#define E820MAP 0x2d0 /* our map */ +#define E820MAX 128 /* number of entries in E820MAP */ + +/* + * Legacy E820 BIOS limits us to 128 (E820MAX) nodes due to the + * constrained space in the zeropage. If we have more nodes than + * that, and if we've booted off EFI firmware, then the EFI tables + * passed us from the EFI firmware can list more nodes. Size our + * internal memory map tables to have room for these additional + * nodes, based on up to three entries per node for which the + * kernel was built: MAX_NUMNODES == (1 << CONFIG_NODES_SHIFT), + * plus E820MAX, allowing space for the possible duplicate E820 + * entries that might need room in the same arrays, prior to the + * call to sanitize_e820_map() to remove duplicates. The allowance + * of three memory map entries per node is "enough" entries for + * the initial hardware platform motivating this mechanism to make + * use of additional EFI map entries. Future platforms may want + * to allow more than three entries per node or otherwise refine + * this size. + */ + +/* + * Odd: 'make headers_check' complains about numa.h if I try + * to collapse the next two #ifdef lines to a single line: + * #if defined(__KERNEL__) && defined(CONFIG_EFI) + */ +#ifdef __KERNEL__ +#ifdef CONFIG_EFI +#include <linux/numa.h> +#define E820_X_MAX (E820MAX + 3 * MAX_NUMNODES) +#else /* ! CONFIG_EFI */ +#define E820_X_MAX E820MAX +#endif +#else /* ! __KERNEL__ */ +#define E820_X_MAX E820MAX +#endif + +#define E820NR 0x1e8 /* # entries in E820MAP */ + +#define E820_RAM 1 +#define E820_RESERVED 2 +#define E820_ACPI 3 +#define E820_NVS 4 +#define E820_UNUSABLE 5 + +/* reserved RAM used by kernel itself */ +#define E820_RESERVED_KERN 128 + +#ifndef __ASSEMBLY__ +#include <linux/types.h> +struct e820entry { + __u64 addr; /* start of memory segment */ + __u64 size; /* size of memory segment */ + __u32 type; /* type of memory segment */ +} __attribute__((packed)); + +struct e820map { + __u32 nr_map; + struct e820entry map[E820_X_MAX]; +}; + +#define ISA_START_ADDRESS 0xa0000 +#define ISA_END_ADDRESS 0x100000 + +#define BIOS_BEGIN 0x000a0000 +#define BIOS_END 0x00100000 + +#ifdef __KERNEL__ +/* see comment in arch/x86/kernel/e820.c */ +extern struct e820map e820; +extern struct e820map e820_saved; + +extern unsigned long pci_mem_start; +extern int e820_any_mapped(u64 start, u64 end, unsigned type); +extern int e820_all_mapped(u64 start, u64 end, unsigned type); +extern void e820_add_region(u64 start, u64 size, int type); +extern void e820_print_map(char *who); +extern int +sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, u32 *pnr_map); +extern u64 e820_update_range(u64 start, u64 size, unsigned old_type, + unsigned new_type); +extern u64 e820_remove_range(u64 start, u64 size, unsigned old_type, + int checktype); +extern void update_e820(void); +extern void e820_setup_gap(void); +extern int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize, + unsigned long start_addr, unsigned long long end_addr); +struct setup_data; +extern void parse_e820_ext(struct setup_data *data, unsigned long pa_data); + +#if defined(CONFIG_X86_64) || \ + (defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION)) +extern void e820_mark_nosave_regions(unsigned long limit_pfn); +#else +static inline void e820_mark_nosave_regions(unsigned long limit_pfn) +{ +} +#endif + +#ifdef CONFIG_MEMTEST +extern void early_memtest(unsigned long start, unsigned long end); +#else +static inline void early_memtest(unsigned long start, unsigned long end) +{ +} +#endif + +extern unsigned long end_user_pfn; + +extern u64 find_e820_area(u64 start, u64 end, u64 size, u64 align); +extern u64 find_e820_area_size(u64 start, u64 *sizep, u64 align); +extern void reserve_early(u64 start, u64 end, char *name); +extern void reserve_early_overlap_ok(u64 start, u64 end, char *name); +extern void free_early(u64 start, u64 end); +extern void early_res_to_bootmem(u64 start, u64 end); +extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align); + +extern unsigned long e820_end_of_ram_pfn(void); +extern unsigned long e820_end_of_low_ram_pfn(void); +extern int e820_find_active_region(const struct e820entry *ei, + unsigned long start_pfn, + unsigned long last_pfn, + unsigned long *ei_startpfn, + unsigned long *ei_endpfn); +extern void e820_register_active_regions(int nid, unsigned long start_pfn, + unsigned long end_pfn); +extern u64 e820_hole_size(u64 start, u64 end); +extern void finish_e820_parsing(void); +extern void e820_reserve_resources(void); +extern void e820_reserve_resources_late(void); +extern void setup_memory_map(void); +extern char *default_machine_specific_memory_setup(void); + +/* + * Returns true iff the specified range [s,e) is completely contained inside + * the ISA region. + */ +/* +static inline bool is_ISA_range(u64 s, u64 e) +{ + return s >= ISA_START_ADDRESS && e <= ISA_END_ADDRESS; +} +*/ +#endif /* __KERNEL__ */ +#endif /* __ASSEMBLY__ */ + +#ifdef __KERNEL__ +/* #include <linux/ioport.h> */ + +#define HIGH_MEMORY (1024*1024) +#endif /* __KERNEL__ */ + +#endif /* _ASM_X86_E820_H */ diff --git a/arch/x86/include/asm/errno.h b/arch/x86/include/asm/errno.h new file mode 100644 index 00000000000..4c82b503d92 --- /dev/null +++ b/arch/x86/include/asm/errno.h @@ -0,0 +1 @@ +#include <asm-generic/errno.h> diff --git a/arch/x86/include/asm/global_data.h b/arch/x86/include/asm/global_data.h new file mode 100644 index 00000000000..f8a16d646fd --- /dev/null +++ b/arch/x86/include/asm/global_data.h @@ -0,0 +1,102 @@ +/* + * (C) Copyright 2002-2010 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_GBL_DATA_H +#define __ASM_GBL_DATA_H +/* + * The following data structure is placed in some memory wich is + * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or + * some locked parts of the data cache) to allow for a minimum set of + * global variables during system initialization (until we have set + * up the memory controller so that we can use RAM). + * + * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t) + */ + +#ifndef __ASSEMBLY__ + +typedef struct global_data { + bd_t *bd; + unsigned long flags; + unsigned long baudrate; + unsigned long have_console; /* serial_init() was called */ + unsigned long reloc_off; /* Relocation Offset */ + unsigned long load_off; /* Load Offset */ + unsigned long env_addr; /* Address of Environment struct */ + unsigned long env_valid; /* Checksum of Environment valid? */ + unsigned long cpu_clk; /* CPU clock in Hz! */ + unsigned long bus_clk; + unsigned long relocaddr; /* Start address of U-Boot in RAM */ + unsigned long start_addr_sp; /* start_addr_stackpointer */ + phys_size_t ram_size; /* RAM size */ + unsigned long reset_status; /* reset status register at boot */ + void **jt; /* jump table */ + char env_buf[32]; /* buffer for getenv() before reloc. */ +} gd_t; + +extern gd_t *gd; + +#endif + +/* Word Offsets into Global Data - MUST match struct gd_t */ +#define GD_BD 0 +#define GD_FLAGS 1 +#define GD_BAUDRATE 2 +#define GD_HAVE_CONSOLE 3 +#define GD_RELOC_OFF 4 +#define GD_LOAD_OFF 5 +#define GD_ENV_ADDR 6 +#define GD_ENV_VALID 7 +#define GD_CPU_CLK 8 +#define GD_BUS_CLK 9 +#define GD_RELOC_ADDR 10 +#define GD_START_ADDR_SP 11 +#define GD_RAM_SIZE 12 +#define GD_RESET_STATUS 13 +#define GD_JT 14 + +#define GD_SIZE 15 + +/* + * Global Data Flags + */ +#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */ +#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ +#define GD_FLG_SILENT 0x00004 /* Silent mode */ +#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */ +#define GD_FLG_POSTSTOP 0x00010 /* POST seqeunce aborted */ +#define GD_FLG_LOGINIT 0x00020 /* Log Buffer has been initialized */ +#define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */ +#define GD_FLG_ENV_READY 0x00080 /* Environment imported into hash table */ +#define GD_FLG_COLD_BOOT 0x00100 /* Cold Boot */ +#define GD_FLG_WARM_BOOT 0x00200 /* Warm Boot */ + +#if 0 +#define DECLARE_GLOBAL_DATA_PTR +#else +#define XTRN_DECLARE_GLOBAL_DATA_PTR extern +#define DECLARE_GLOBAL_DATA_PTR XTRN_DECLARE_GLOBAL_DATA_PTR \ +gd_t *gd +#endif + +#endif /* __ASM_GBL_DATA_H */ diff --git a/arch/x86/include/asm/i8254.h b/arch/x86/include/asm/i8254.h new file mode 100644 index 00000000000..aafdfb8060d --- /dev/null +++ b/arch/x86/include/asm/i8254.h @@ -0,0 +1,55 @@ +/* + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB, daniel@omicron.se. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +/* i8254.h Intel 8254 PIT registers */ + + +#ifndef _ASMI386_I8254_H_ +#define _ASMI386_I8954_H_ 1 + + +#define PIT_T0 0x00 /* PIT channel 0 count/status */ +#define PIT_T1 0x01 /* PIT channel 1 count/status */ +#define PIT_T2 0x02 /* PIT channel 2 count/status */ +#define PIT_COMMAND 0x03 /* PIT mode control, latch and read back */ + +/* PIT Command Register Bit Definitions */ + +#define PIT_CMD_CTR0 0x00 /* Select PIT counter 0 */ +#define PIT_CMD_CTR1 0x40 /* Select PIT counter 1 */ +#define PIT_CMD_CTR2 0x80 /* Select PIT counter 2 */ + +#define PIT_CMD_LATCH 0x00 /* Counter Latch Command */ +#define PIT_CMD_LOW 0x10 /* Access counter bits 7-0 */ +#define PIT_CMD_HIGH 0x20 /* Access counter bits 15-8 */ +#define PIT_CMD_BOTH 0x30 /* Access counter bits 15-0 in two accesses */ + +#define PIT_CMD_MODE0 0x00 /* Select mode 0 */ +#define PIT_CMD_MODE1 0x02 /* Select mode 1 */ +#define PIT_CMD_MODE2 0x04 /* Select mode 2 */ +#define PIT_CMD_MODE3 0x06 /* Select mode 3 */ +#define PIT_CMD_MODE4 0x08 /* Select mode 4 */ +#define PIT_CMD_MODE5 0x0A /* Select mode 5 */ + +#endif diff --git a/arch/x86/include/asm/i8259.h b/arch/x86/include/asm/i8259.h new file mode 100644 index 00000000000..774d7a31e79 --- /dev/null +++ b/arch/x86/include/asm/i8259.h @@ -0,0 +1,88 @@ +/* + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB, daniel@omicron.se. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* i8259.h i8259 PIC Registers */ + +#ifndef _ASMI386_I8259_H_ +#define _ASMI386_I8959_H_ 1 + + +/* PIC I/O mapped registers */ + +#define IRR 0x0 /* Interrupt Request Register */ +#define ISR 0x0 /* In-Service Register */ +#define ICW1 0x0 /* Initialization Control Word 1 */ +#define OCW2 0x0 /* Operation Control Word 2 */ +#define OCW3 0x0 /* Operation Control Word 3 */ +#define ICW2 0x1 /* Initialization Control Word 2 */ +#define ICW3 0x1 /* Initialization Control Word 3 */ +#define ICW4 0x1 /* Initialization Control Word 4 */ +#define IMR 0x1 /* Interrupt Mask Register */ + +/* bits for IRR, IMR, ISR and ICW3 */ +#define IR7 0x80 /* IR7 */ +#define IR6 0x40 /* IR6 */ +#define IR5 0x20 /* IR5 */ +#define IR4 0x10 /* IR4 */ +#define IR3 0x08 /* IR3 */ +#define IR2 0x04 /* IR2 */ +#define IR1 0x02 /* IR1 */ +#define IR0 0x01 /* IR0 */ + +/* bits for SEOI */ +#define SEOI_IR7 0x07 /* IR7 */ +#define SEOI_IR6 0x06 /* IR6 */ +#define SEOI_IR5 0x05 /* IR5 */ +#define SEOI_IR4 0x04 /* IR4 */ +#define SEOI_IR3 0x03 /* IR3 */ +#define SEOI_IR2 0x02 /* IR2 */ +#define SEOI_IR1 0x01 /* IR1 */ +#define SEOI_IR0 0x00 /* IR0 */ + +/* OCW2 bits */ +#define OCW2_RCLR 0x00 /* Rotate/clear */ +#define OCW2_NEOI 0x20 /* Non specific EOI */ +#define OCW2_NOP 0x40 /* NOP */ +#define OCW2_SEOI 0x60 /* Specific EOI */ +#define OCW2_RSET 0x80 /* Rotate/set */ +#define OCW2_REOI 0xA0 /* Rotate on non specific EOI */ +#define OCW2_PSET 0xC0 /* Priority Set Command */ +#define OCW2_RSEOI 0xE0 /* Rotate on specific EOI */ + +/* ICW1 bits */ +#define ICW1_SEL 0x10 /* Select ICW1 */ +#define ICW1_LTIM 0x08 /* Level-Triggered Interrupt Mode */ +#define ICW1_ADI 0x04 /* Address Interval */ +#define ICW1_SNGL 0x02 /* Single PIC */ +#define ICW1_EICW4 0x01 /* Expect initilization ICW4 */ + +/* ICW2 is the starting vector number */ + +/* ICW2 is bit-mask of present slaves for a master device, + * or the slave ID for a slave device */ + +/* ICW4 bits */ +#define ICW4_AEOI 0x02 /* Automatic EOI Mode */ +#define ICW4_PM 0x01 /* Microprocessor Mode */ + +#endif diff --git a/arch/x86/include/asm/ibmpc.h b/arch/x86/include/asm/ibmpc.h new file mode 100644 index 00000000000..e35cbd887ad --- /dev/null +++ b/arch/x86/include/asm/ibmpc.h @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB, daniel@omicron.se + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_IBMPC_H_ +#define __ASM_IBMPC_H_ 1 + +/* misc ports in an ibm compatible pc */ + +#define MASTER_PIC 0x20 +#define PIT_BASE 0x40 +#define KBDDATA 0x60 +#define SYSCTLB 0x62 +#define KBDCMD 0x64 +#define SYSCTLA 0x92 +#define SLAVE_PIC 0xa0 + +#if 1 +#define UART0_BASE 0x3f8 +#define UART1_BASE 0x2f8 +#else +/* FixMe: uarts swapped */ +#define UART0_BASE 0x2f8 +#define UART1_BASE 0x3f8 +#endif + + +#endif diff --git a/arch/x86/include/asm/ic/pci.h b/arch/x86/include/asm/ic/pci.h new file mode 100644 index 00000000000..2e4376b9b03 --- /dev/null +++ b/arch/x86/include/asm/ic/pci.h @@ -0,0 +1,79 @@ +/* + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_IC_SC520_PCI_H_ +#define _ASM_IC_SC520_PCI_H_ 1 + +/* bus mapping constants (used for PCI core initialization) */ /* bus mapping constants */ +#define SC520_REG_ADDR 0x00000cf8 +#define SC520_REG_DATA 0x00000cfc + +#define SC520_ISA_MEM_PHYS 0x00000000 +#define SC520_ISA_MEM_BUS 0x00000000 +#define SC520_ISA_MEM_SIZE 0x01000000 + +#define SC520_ISA_IO_PHYS 0x00000000 +#define SC520_ISA_IO_BUS 0x00000000 +#define SC520_ISA_IO_SIZE 0x00001000 + +/* PCI I/O space from 0x1000 to 0xdfff + * (make 0xe000-0xfdff available for stuff like PCCard boot) */ +#define SC520_PCI_IO_PHYS 0x00001000 +#define SC520_PCI_IO_BUS 0x00001000 +#define SC520_PCI_IO_SIZE 0x0000d000 + +/* system memory from 0x00000000 to 0x0fffffff */ +#define SC520_PCI_MEMORY_PHYS 0x00000000 +#define SC520_PCI_MEMORY_BUS 0x00000000 +#define SC520_PCI_MEMORY_SIZE 0x10000000 + +/* PCI bus memory from 0x10000000 to 0x26ffffff + * (make 0x27000000 - 0x27ffffff available for stuff like PCCard boot) */ +#define SC520_PCI_MEM_PHYS 0x10000000 +#define SC520_PCI_MEM_BUS 0x10000000 +#define SC520_PCI_MEM_SIZE 0x17000000 + +/* pin number used for PCI interrupt mappings */ +#define SC520_PCI_INTA 0 +#define SC520_PCI_INTB 1 +#define SC520_PCI_INTC 2 +#define SC520_PCI_INTD 3 +#define SC520_PCI_GPIRQ0 4 +#define SC520_PCI_GPIRQ1 5 +#define SC520_PCI_GPIRQ2 6 +#define SC520_PCI_GPIRQ3 7 +#define SC520_PCI_GPIRQ4 8 +#define SC520_PCI_GPIRQ5 9 +#define SC520_PCI_GPIRQ6 10 +#define SC520_PCI_GPIRQ7 11 +#define SC520_PCI_GPIRQ8 12 +#define SC520_PCI_GPIRQ9 13 +#define SC520_PCI_GPIRQ10 14 + +extern int sc520_pci_ints[]; + +void pci_sc520_init(struct pci_controller *hose); +int pci_set_regions(struct pci_controller *hose); +int pci_sc520_set_irq(int pci_pin, int irq); + +#endif diff --git a/arch/x86/include/asm/ic/sc520.h b/arch/x86/include/asm/ic/sc520.h new file mode 100644 index 00000000000..956c1c26360 --- /dev/null +++ b/arch/x86/include/asm/ic/sc520.h @@ -0,0 +1,398 @@ +/* + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_IC_SC520_H_ +#define _ASM_IC_SC520_H_ 1 + +#ifndef __ASSEMBLY__ + +void init_sc520(void); +unsigned long init_sc520_dram(void); +void sc520_udelay(unsigned long usec); + +/* Memory mapped configuration registers */ +typedef struct sc520_mmcr { + u16 revid; /* ElanSC520 microcontroller revision id */ + u8 cpuctl; /* am5x86 CPU control */ + + u8 pad_0x003[0x0d]; + + u8 drcctl; /* SDRAM control */ + u8 pad_0x011[0x01]; + u8 drctmctl; /* SDRAM timing control */ + u8 pad_0x013[0x01]; + u16 drccfg; /* SDRAM bank configuration*/ + u8 pad_0x016[0x02]; + u32 drcbendadr; /* SDRAM bank 0-3 ending address*/ + u8 pad_0x01c[0x04]; + u8 eccctl; /* ECC control */ + u8 eccsta; /* ECC status */ + u8 eccckbpos; /* ECC check bit position */ + u8 ecccktest; /* ECC Check Code Test */ + u32 eccsbadd; /* ECC single-bit error address */ + u32 eccmbadd; /* ECC multi-bit error address */ + + u8 pad_0x02c[0x14]; + + u8 dbctl; /* SDRAM buffer control */ + + u8 pad_0x041[0x0f]; + + u16 bootcsctl; /* /BOOTCS control */ + u8 pad_0x052[0x02]; + u16 romcs1ctl; /* /ROMCS1 control */ + u16 romcs2ctl; /* /ROMCS2 control */ + + u8 pad_0x058[0x08]; + + u16 hbctl; /* host bridge control */ + u16 hbtgtirqctl; /* host bridge target interrupt control */ + u16 hbtgtirqsta; /* host bridge target interrupt status */ + u16 hbmstirqctl; /* host bridge target interrupt control */ + u16 hbmstirqsta; /* host bridge master interrupt status */ + u8 pad_0x06a[0x02]; + u32 mstintadd; /* host bridge master interrupt address */ + + u8 sysarbctl; /* system arbiter control */ + u8 pciarbsta; /* PCI bus arbiter status */ + u16 sysarbmenb; /* system arbiter master enable */ + u32 arbprictl; /* arbiter priority control */ + + u8 pad_0x078[0x08]; + + u8 adddecctl; /* address decode control */ + u8 pad_0x081[0x01]; + u16 wpvsta; /* write-protect violation status */ + u8 pad_0x084[0x04]; + u32 par[16]; /* programmable address regions */ + + u8 pad_0x0c8[0x0b38]; + + u8 gpecho; /* GP echo mode */ + u8 gpcsdw; /* GP chip select data width */ + u16 gpcsqual; /* GP chip select qualification */ + u8 pad_0xc04[0x4]; + u8 gpcsrt; /* GP chip select recovery time */ + u8 gpcspw; /* GP chip select pulse width */ + u8 gpcsoff; /* GP chip select offset */ + u8 gprdw; /* GP read pulse width */ + u8 gprdoff; /* GP read offset */ + u8 gpwrw; /* GP write pulse width */ + u8 gpwroff; /* GP write offset */ + u8 gpalew; /* GP ale pulse width */ + u8 gpaleoff; /* GP ale offset */ + + u8 pad_0xc11[0x0f]; + + u16 piopfs15_0; /* PIO15-PIO0 pin function select */ + u16 piopfs31_16; /* PIO31-PIO16 pin function select */ + u8 cspfs; /* chip select pin function select */ + u8 pad_0xc25[0x01]; + u8 clksel; /* clock select */ + u8 pad_0xc27[0x01]; + u16 dsctl; /* drive strength control */ + u16 piodir15_0; /* PIO15-PIO0 direction */ + u16 piodir31_16; /* PIO31-PIO16 direction */ + u8 pad_0xc2e[0x02]; + u16 piodata15_0 ; /* PIO15-PIO0 data */ + u16 piodata31_16; /* PIO31-PIO16 data */ + u16 pioset15_0; /* PIO15-PIO0 set */ + u16 pioset31_16; /* PIO31-PIO16 set */ + u16 pioclr15_0; /* PIO15-PIO0 clear */ + u16 pioclr31_16; /* PIO31-PIO16 clear */ + + u8 pad_0xc3c[0x24]; + + u16 swtmrmilli; /* software timer millisecond count */ + u16 swtmrmicro; /* software timer microsecond count */ + u8 swtmrcfg; /* software timer configuration */ + + u8 pad_0xc65[0x0b]; + + u8 gptmrsta; /* GP timers status register */ + u8 pad_0xc71; + u16 gptmr0ctl; /* GP timer 0 mode/control */ + u16 gptmr0cnt; /* GP timer 0 count */ + u16 gptmr0maxcmpa; /* GP timer 0 maxcount compare A */ + u16 gptmr0maxcmpb; /* GP timer 0 maxcount compare B */ + u16 gptmr1ctl; /* GP timer 1 mode/control */ + u16 gptmr1cnt; /* GP timer 1 count */ + u16 gptmr1maxcmpa; /* GP timer 1 maxcount compare A */ + u16 gptmr1maxcmpb; /* GP timer 1 maxcount compare B*/ + u16 gptmr2ctl; /* GP timer 2 mode/control */ + u16 gptmr2cnt; /* GP timer 2 count */ + u8 pad_0xc86[0x08]; + u16 gptmr2maxcmpa; /* GP timer 2 maxcount compare A */ + + u8 pad_0xc90[0x20]; + + u16 wdtmrctl; /* watchdog timer control */ + u16 wdtmrcntl; /* watchdog timer count low */ + u16 wdtmrcnth; /* watchdog timer count high */ + + u8 pad_0xcb6[0x0a]; + + u8 uart1ctl; /* UART 1 general control */ + u8 uart1sta; /* UART 1 general status */ + u8 uart1fcrshad; /* UART 1 FIFO control shadow */ + u8 pad_0xcc3[0x01]; + u8 uart2ctl; /* UART 2 general control */ + u8 uart2sta; /* UART 2 general status */ + u8 uart2fcrshad; /* UART 2 FIFO control shadow */ + + u8 pad_0xcc7[0x09]; + + u8 ssictl; /* SSI control */ + u8 ssixmit; /* SSI transmit */ + u8 ssicmd; /* SSI command */ + u8 ssista; /* SSI status */ + u8 ssircv; /* SSI receive */ + + u8 pad_0xcd5[0x2b]; + + u8 picicr; /* interrupt control */ + u8 pad_0xd01[0x01]; + u8 pic_mode[3]; /* PIC interrupt mode */ + u8 pad_0xd05[0x03]; + u16 swint16_1; /* software interrupt 16-1 control */ + u8 swint22_17; /* software interrupt 22-17/NMI control */ + u8 pad_0xd0b[0x05]; + u16 intpinpol; /* interrupt pin polarity */ + u8 pad_0xd12[0x02]; + u16 pcihostmap; /* PCI host bridge interrupt mapping */ + u8 pad_0xd16[0x02]; + u16 eccmap; /* ECC interrupt mapping */ + u8 gp_tmr_int_map[3]; /* GP timer interrupt mapping */ + u8 pad_0xd1d[0x03]; + u8 pit_int_map[3]; /* PIT interrupt mapping */ + u8 pad_0xd23[0x05]; + u8 uart_int_map[2]; /* UART interrupt mapping */ + u8 pad_0xd2a[0x06]; + u8 pci_int_map[4]; /* PCI interrupt mapping (A through D)*/ + u8 pad_0xd34[0x0c]; + u8 dmabcintmap; /* DMA buffer chaining interrupt mapping */ + u8 ssimap; /* SSI interrupt mapping register */ + u8 wdtmap; /* watchdog timer interrupt mapping */ + u8 rtcmap; /* RTC interrupt mapping register */ + u8 wpvmap; /* write-protect interrupt mapping */ + u8 icemap; /* AMDebug JTAG Rx/Tx interrupt mapping */ + u8 ferrmap; /* floating point error interrupt mapping */ + u8 pad_0xd47[0x09]; + u8 gp_int_map[11]; /* GP IRQ interrupt mapping */ + + u8 pad_0xd5b[0x15]; + + u8 sysinfo; /* system board information */ + u8 pad_0xd71[0x01]; + u8 rescfg; /* reset configuration */ + u8 pad_0xd73[0x01]; + u8 ressta; /* reset status */ + + u8 pad_0xd75[0x0b]; + + u8 gpdmactl; /* GP-DMA Control */ + u8 gpdmammio; /* GP-DMA memory-mapped I/O */ + u16 gpdmaextchmapa; /* GP-DMA resource channel map a */ + u16 gpdmaextchmapb; /* GP-DMA resource channel map b */ + u8 gp_dma_ext_pg_0; /* GP-DMA channel extended page 0 */ + u8 gp_dma_ext_pg_1; /* GP-DMA channel extended page 0 */ + u8 gp_dma_ext_pg_2; /* GP-DMA channel extended page 0 */ + u8 gp_dma_ext_pg_3; /* GP-DMA channel extended page 0 */ + u8 gp_dma_ext_pg_5; /* GP-DMA channel extended page 0 */ + u8 gp_dma_ext_pg_6; /* GP-DMA channel extended page 0 */ + u8 gp_dma_ext_pg_7; /* GP-DMA channel extended page 0 */ + u8 pad_0xd8d[0x03]; + u8 gpdmaexttc3; /* GP-DMA channel 3 extender transfer count */ + u8 gpdmaexttc5; /* GP-DMA channel 5 extender transfer count */ + u8 gpdmaexttc6; /* GP-DMA channel 6 extender transfer count */ + u8 gpdmaexttc7; /* GP-DMA channel 7 extender transfer count */ + u8 pad_0xd94[0x4]; + u8 gpdmabcctl; /* buffer chaining control */ + u8 gpdmabcsta; /* buffer chaining status */ + u8 gpdmabsintenb; /* buffer chaining interrupt enable */ + u8 gpdmabcval; /* buffer chaining valid */ + u8 pad_0xd9c[0x04]; + u16 gpdmanxtaddl3; /* GP-DMA channel 3 next address low */ + u16 gpdmanxtaddh3; /* GP-DMA channel 3 next address high */ + u16 gpdmanxtaddl5; /* GP-DMA channel 5 next address low */ + u16 gpdmanxtaddh5; /* GP-DMA channel 5 next address high */ + u16 gpdmanxtaddl6; /* GP-DMA channel 6 next address low */ + u16 gpdmanxtaddh6; /* GP-DMA channel 6 next address high */ + u16 gpdmanxtaddl7; /* GP-DMA channel 7 next address low */ + u16 gpdmanxtaddh7; /* GP-DMA channel 7 next address high */ + u16 gpdmanxttcl3; /* GP-DMA channel 3 next transfer count low */ + u16 gpdmanxttch3; /* GP-DMA channel 3 next transfer count high */ + u16 gpdmanxttcl5; /* GP-DMA channel 5 next transfer count low */ + u16 gpdmanxttch5; /* GP-DMA channel 5 next transfer count high */ + u16 gpdmanxttcl6; /* GP-DMA channel 6 next transfer count low */ + u16 gpdmanxttch6; /* GP-DMA channel 6 next transfer count high */ + u16 gpdmanxttcl7; /* GP-DMA channel 7 next transfer count low */ + u16 gpdmanxttch7; /* GP-DMA channel 7 next transfer count high */ + + u8 pad_0xdc0[0x0240]; +} sc520_mmcr_t; + +extern sc520_mmcr_t *sc520_mmcr; + +#endif + +/* Memory Mapped Control Registers (MMCR) Base Address */ +#define SC520_MMCR_BASE 0xfffef000 + +/* MMCR Addresses (required for assembler code) */ +#define SC520_DRCCTL (SC520_MMCR_BASE + 0x010) +#define SC520_DRCTMCTL (SC520_MMCR_BASE + 0x012) +#define SC520_DRCCFG (SC520_MMCR_BASE + 0x014) +#define SC520_DRCBENDADR (SC520_MMCR_BASE + 0x018) +#define SC520_ECCCTL (SC520_MMCR_BASE + 0x020) +#define SC520_DBCTL (SC520_MMCR_BASE + 0x040) +#define SC520_ECCINT (SC520_MMCR_BASE + 0xd18) + +#define SC520_PAR0 (SC520_MMCR_BASE + 0x088) +#define SC520_PAR1 (SC520_PAR0 + (0x04 * 1)) +#define SC520_PAR2 (SC520_PAR0 + (0x04 * 2)) +#define SC520_PAR3 (SC520_PAR0 + (0x04 * 3)) +#define SC520_PAR4 (SC520_PAR0 + (0x04 * 4)) +#define SC520_PAR5 (SC520_PAR0 + (0x04 * 5)) +#define SC520_PAR6 (SC520_PAR0 + (0x04 * 6)) +#define SC520_PAR7 (SC520_PAR0 + (0x04 * 7)) +#define SC520_PAR8 (SC520_PAR0 + (0x04 * 8)) +#define SC520_PAR9 (SC520_PAR0 + (0x04 * 9)) +#define SC520_PAR10 (SC520_PAR0 + (0x04 * 10)) +#define SC520_PAR11 (SC520_PAR0 + (0x04 * 11)) +#define SC520_PAR12 (SC520_PAR0 + (0x04 * 12)) +#define SC520_PAR13 (SC520_PAR0 + (0x04 * 13)) +#define SC520_PAR14 (SC520_PAR0 + (0x04 * 14)) +#define SC520_PAR15 (SC520_PAR0 + (0x04 * 15)) + +/* + * PARs for maximum allowable 256MB of SDRAM @ 0x00000000 + * Two PARs are required due to maximum PAR size of 128MB + * These are used in the SDRAM sizing code to disable caching + * + * 111 0 0 0 1 11111111111 00000000000000 }- 0xe3ffc000 + * 111 0 0 0 1 11111111111 00100000000000 }- 0xe3ffc800 + * \ / | | | | \----+----/ \-----+------/ + * | | | | | | +---------- Start at 0x00000000 + * | | | | | | 0x08000000 + * | | | | | +----------------------- 128MB Region Size + * | | | | | ((2047 + 1) * 64kB) + * | | | | +------------------------------ 64kB Page Size + * | | | +-------------------------------- Writes Enabled + * | | +---------------------------------- Caching Enabled + * | +------------------------------------ Execution Enabled + * +--------------------------------------- SDRAM + */ +#define SC520_SDRAM1_PAR 0xe3ffc000 +#define SC520_SDRAM2_PAR 0xe3ffc800 + +#define SC520_PAR_WRITE_DIS 0x04000000 +#define SC520_PAR_CACHE_DIS 0x08000000 +#define SC520_PAR_EXEC_DIS 0x10000000 + +/* + * Programmable Address Regions to cover 256MB SDRAM (Maximum supported) + * required for DRAM sizing code + */ + +/* MMCR Register bits (not all of them :) ) */ + +/* SSI Stuff */ +#define CTL_CLK_SEL_4 0x00 /* Nominal Bit Rate = 8 MHz */ +#define CTL_CLK_SEL_8 0x10 /* Nominal Bit Rate = 4 MHz */ +#define CTL_CLK_SEL_16 0x20 /* Nominal Bit Rate = 2 MHz */ +#define CTL_CLK_SEL_32 0x30 /* Nominal Bit Rate = 1 MHz */ +#define CTL_CLK_SEL_64 0x40 /* Nominal Bit Rate = 512 KHz */ +#define CTL_CLK_SEL_128 0x50 /* Nominal Bit Rate = 256 KHz */ +#define CTL_CLK_SEL_256 0x60 /* Nominal Bit Rate = 128 KHz */ +#define CTL_CLK_SEL_512 0x70 /* Nominal Bit Rate = 64 KHz */ + +#define TC_INT_ENB 0x08 /* Transaction Complete Interrupt Enable */ +#define PHS_INV_ENB 0x04 /* SSI Inverted Phase Mode Enable */ +#define CLK_INV_ENB 0x02 /* SSI Inverted Clock Mode Enable */ +#define MSBF_ENB 0x01 /* SSI Most Significant Bit First Mode Enable */ + +#define SSICMD_CMD_SEL_XMITRCV 0x03 /* Simultaneous Transmit / Receive Transaction */ +#define SSICMD_CMD_SEL_RCV 0x02 /* Receive Transaction */ +#define SSICMD_CMD_SEL_XMIT 0x01 /* Transmit Transaction */ +#define SSISTA_BSY 0x02 /* SSI Busy */ +#define SSISTA_TC_INT 0x01 /* SSI Transaction Complete Interrupt */ + +/* BITS for SC520_ADDDECCTL: */ +#define WPV_INT_ENB 0x80 /* Write-Protect Violation Interrupt Enable */ +#define IO_HOLE_DEST_PCI 0x10 /* I/O Hole Access Destination */ +#define RTC_DIS 0x04 /* RTC Disable */ +#define UART2_DIS 0x02 /* UART2 Disable */ +#define UART1_DIS 0x01 /* UART1 Disable */ + +/* + * Defines used for SDRAM Sizing (number of columns and rows) + * Refer to section 10.6.4 - SDRAM Sizing Algorithm in the + * Elan SC520 Microcontroller User's Manual (Order #22004B) + */ +#define CACHELINESZ 0x00000010 + +#define COL11_ADR 0x0e001e00 +#define COL10_ADR 0x0e000e00 +#define COL09_ADR 0x0e000600 +#define COL08_ADR 0x0e000200 +#define COL11_DATA 0x0b0b0b0b +#define COL10_DATA 0x0a0a0a0a +#define COL09_DATA 0x09090909 +#define COL08_DATA 0x08080808 + +#define ROW14_ADR 0x0f000000 +#define ROW13_ADR 0x07000000 +#define ROW12_ADR 0x03000000 +#define ROW11_ADR 0x01000000 +#define ROW10_ADR 0x00000000 +#define ROW14_DATA 0x3f3f3f3f +#define ROW13_DATA 0x1f1f1f1f +#define ROW12_DATA 0x0f0f0f0f +#define ROW11_DATA 0x07070707 +#define ROW10_DATA 0xaaaaaaaa + +/* 0x28000000 - 0x3fffffff is used by the flash banks */ + +/* 0x40000000 - 0xffffffff is not adressable by the SC520 */ + +/* priority numbers used for interrupt channel mappings */ +#define SC520_IRQ_DISABLED 0 +#define SC520_IRQ0 1 +#define SC520_IRQ1 2 +#define SC520_IRQ2 4 /* same as IRQ9 */ +#define SC520_IRQ3 11 +#define SC520_IRQ4 12 +#define SC520_IRQ5 13 +#define SC520_IRQ6 21 +#define SC520_IRQ7 22 +#define SC520_IRQ8 3 +#define SC520_IRQ9 4 +#define SC520_IRQ10 5 +#define SC520_IRQ11 6 +#define SC520_IRQ12 7 +#define SC520_IRQ13 8 +#define SC520_IRQ14 9 +#define SC520_IRQ15 10 + +#endif diff --git a/arch/x86/include/asm/ic/ssi.h b/arch/x86/include/asm/ic/ssi.h new file mode 100644 index 00000000000..bd48eab1610 --- /dev/null +++ b/arch/x86/include/asm/ic/ssi.h @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2008 + * Graeme Russ <graeme.russ@gmail.com>. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_IC_SSI_H_ +#define _ASM_IC_SSI_H_ 1 + +int ssi_set_interface(int, int, int, int); +void ssi_chip_select(int); +u8 ssi_txrx_byte(u8); +void ssi_tx_byte(u8); +u8 ssi_rx_byte(void); + + +#endif diff --git a/arch/x86/include/asm/interrupt.h b/arch/x86/include/asm/interrupt.h new file mode 100644 index 00000000000..be52fe40d07 --- /dev/null +++ b/arch/x86/include/asm/interrupt.h @@ -0,0 +1,46 @@ +/* + * (C) Copyright 2009 + * Graeme Russ, graeme.russ@gmail.com + * + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB, daniel@omicron.se + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_INTERRUPT_H_ +#define __ASM_INTERRUPT_H_ 1 + +#include <asm/types.h> + +/* arch/x86/cpu/interrupts.c */ +void set_vector(u8 intnum, void *routine); + +/* arch/x86/lib/interupts.c */ +void disable_irq(int irq); +void enable_irq(int irq); + +/* Architecture specific functions */ +void mask_irq(int irq); +void unmask_irq(int irq); +void specific_eoi(int irq); + +extern char exception_stack[]; + +#endif diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h new file mode 100644 index 00000000000..9b757d489e3 --- /dev/null +++ b/arch/x86/include/asm/io.h @@ -0,0 +1,237 @@ +#ifndef _ASM_IO_H +#define _ASM_IO_H + +/* + * This file contains the definitions for the x86 IO instructions + * inb/inw/inl/outb/outw/outl and the "string versions" of the same + * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" + * versions of the single-IO instructions (inb_p/inw_p/..). + * + * This file is not meant to be obfuscating: it's just complicated + * to (a) handle it all in a way that makes gcc able to optimize it + * as well as possible and (b) trying to avoid writing the same thing + * over and over again with slight variations and possibly making a + * mistake somewhere. + */ + +/* + * Thanks to James van Artsdalen for a better timing-fix than + * the two short jumps: using outb's to a nonexistent port seems + * to guarantee better timings even on fast machines. + * + * On the other hand, I'd like to be sure of a non-existent port: + * I feel a bit unsafe about using 0x80 (should be safe, though) + * + * Linus + */ + + /* + * Bit simplified and optimized by Jan Hubicka + * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999. + * + * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added, + * isa_read[wl] and isa_write[wl] fixed + * - Arnaldo Carvalho de Melo <acme@conectiva.com.br> + */ + +#define IO_SPACE_LIMIT 0xffff + + +#ifdef __KERNEL__ + + +/* + * readX/writeX() are used to access memory mapped devices. On some + * architectures the memory mapped IO stuff needs to be accessed + * differently. On the x86 architecture, we just read/write the + * memory location directly. + */ + +#define readb(addr) (*(volatile unsigned char *) (addr)) +#define readw(addr) (*(volatile unsigned short *) (addr)) +#define readl(addr) (*(volatile unsigned int *) (addr)) +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl + +#define writeb(b,addr) (*(volatile unsigned char *) (addr) = (b)) +#define writew(b,addr) (*(volatile unsigned short *) (addr) = (b)) +#define writel(b,addr) (*(volatile unsigned int *) (addr) = (b)) +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel + +#define memset_io(a,b,c) memset((a),(b),(c)) +#define memcpy_fromio(a,b,c) memcpy((a),(b),(c)) +#define memcpy_toio(a,b,c) memcpy((a),(b),(c)) + +/* + * ISA space is 'always mapped' on a typical x86 system, no need to + * explicitly ioremap() it. The fact that the ISA IO space is mapped + * to PAGE_OFFSET is pure coincidence - it does not mean ISA values + * are physical addresses. The following constant pointer can be + * used as the IO-area pointer (it can be iounmapped as well, so the + * analogy with PCI is quite large): + */ +#define isa_readb(a) readb((a)) +#define isa_readw(a) readw((a)) +#define isa_readl(a) readl((a)) +#define isa_writeb(b,a) writeb(b,(a)) +#define isa_writew(w,a) writew(w,(a)) +#define isa_writel(l,a) writel(l,(a)) +#define isa_memset_io(a,b,c) memset_io((a),(b),(c)) +#define isa_memcpy_fromio(a,b,c) memcpy_fromio((a),(b),(c)) +#define isa_memcpy_toio(a,b,c) memcpy_toio((a),(b),(c)) + + +static inline int check_signature(unsigned long io_addr, + const unsigned char *signature, int length) +{ + int retval = 0; + do { + if (readb(io_addr) != *signature) + goto out; + io_addr++; + signature++; + length--; + } while (length); + retval = 1; +out: + return retval; +} + +/** + * isa_check_signature - find BIOS signatures + * @io_addr: mmio address to check + * @signature: signature block + * @length: length of signature + * + * Perform a signature comparison with the ISA mmio address io_addr. + * Returns 1 on a match. + * + * This function is deprecated. New drivers should use ioremap and + * check_signature. + */ + + +static inline int isa_check_signature(unsigned long io_addr, + const unsigned char *signature, int length) +{ + int retval = 0; + do { + if (isa_readb(io_addr) != *signature) + goto out; + io_addr++; + signature++; + length--; + } while (length); + retval = 1; +out: + return retval; +} + +#endif /* __KERNEL__ */ + +#ifdef SLOW_IO_BY_JUMPING +#define __SLOW_DOWN_IO "\njmp 1f\n1:\tjmp 1f\n1:" +#else +#define __SLOW_DOWN_IO "\noutb %%al,$0x80" +#endif + +#ifdef REALLY_SLOW_IO +#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO +#else +#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO +#endif + + +/* + * Talk about misusing macros.. + */ +#define __OUT1(s,x) \ +static inline void out##s(unsigned x value, unsigned short port) { + +#define __OUT2(s,s1,s2) \ +__asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1" + + +#define __OUT(s,s1,x) \ +__OUT1(s,x) __OUT2(s,s1,"w") : : "a" (value), "Nd" (port)); } \ +__OUT1(s##_p,x) __OUT2(s,s1,"w") __FULL_SLOW_DOWN_IO : : "a" (value), "Nd" (port));} + +#define __IN1(s) \ +static inline RETURN_TYPE in##s(unsigned short port) { RETURN_TYPE _v; + +#define __IN2(s,s1,s2) \ +__asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0" + +#define __IN(s,s1,i...) \ +__IN1(s) __IN2(s,s1,"w") : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \ +__IN1(s##_p) __IN2(s,s1,"w") __FULL_SLOW_DOWN_IO : "=a" (_v) : "Nd" (port) ,##i ); return _v; } + +#define __INS(s) \ +static inline void ins##s(unsigned short port, void * addr, unsigned long count) \ +{ __asm__ __volatile__ ("rep ; ins" #s \ +: "=D" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); } + +#define __OUTS(s) \ +static inline void outs##s(unsigned short port, const void * addr, unsigned long count) \ +{ __asm__ __volatile__ ("rep ; outs" #s \ +: "=S" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); } + +#define RETURN_TYPE unsigned char +__IN(b,"") +#undef RETURN_TYPE +#define RETURN_TYPE unsigned short +__IN(w,"") +#undef RETURN_TYPE +#define RETURN_TYPE unsigned int +__IN(l,"") +#undef RETURN_TYPE + +__OUT(b,"b",char) +__OUT(w,"w",short) +__OUT(l,,int) + +__INS(b) +__INS(w) +__INS(l) + +__OUTS(b) +__OUTS(w) +__OUTS(l) + +static inline void sync(void) +{ +} + +/* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + +#endif diff --git a/arch/x86/include/asm/ioctl.h b/arch/x86/include/asm/ioctl.h new file mode 100644 index 00000000000..b279fe06dfe --- /dev/null +++ b/arch/x86/include/asm/ioctl.h @@ -0,0 +1 @@ +#include <asm-generic/ioctl.h> diff --git a/arch/x86/include/asm/ist.h b/arch/x86/include/asm/ist.h new file mode 100644 index 00000000000..7e5dff1de0e --- /dev/null +++ b/arch/x86/include/asm/ist.h @@ -0,0 +1,34 @@ +#ifndef _ASM_X86_IST_H +#define _ASM_X86_IST_H + +/* + * Include file for the interface to IST BIOS + * Copyright 2002 Andy Grover <andrew.grover@intel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + + +#include <linux/types.h> + +struct ist_info { + __u32 signature; + __u32 command; + __u32 event; + __u32 perf_level; +}; + +#ifdef __KERNEL__ + +extern struct ist_info ist_info; + +#endif /* __KERNEL__ */ +#endif /* _ASM_X86_IST_H */ diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h new file mode 100644 index 00000000000..050a2bb8683 --- /dev/null +++ b/arch/x86/include/asm/pci.h @@ -0,0 +1,34 @@ + + +/* + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB, daniel@omicron.se + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _PCI_I386_H_ +#define _PCI_I386_H_ 1 + +void pci_setup_type1(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data); +int pci_enable_legacy_video_ports(struct pci_controller* hose); +int pci_shadow_rom(pci_dev_t dev, unsigned char *dest); +void pci_remove_rom_window(struct pci_controller* hose, u32 addr); +u32 pci_get_rom_window(struct pci_controller* hose, int size); +#endif diff --git a/arch/x86/include/asm/posix_types.h b/arch/x86/include/asm/posix_types.h new file mode 100644 index 00000000000..5529f32702c --- /dev/null +++ b/arch/x86/include/asm/posix_types.h @@ -0,0 +1,80 @@ +#ifndef __ARCH_I386_POSIX_TYPES_H +#define __ARCH_I386_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned short __kernel_dev_t; +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +#define __FD_SET(fd,fdsetp) \ + __asm__ __volatile__("btsl %1,%0": \ + "=m" (*(__kernel_fd_set *) (fdsetp)):"r" ((int) (fd))) + +#undef __FD_CLR +#define __FD_CLR(fd,fdsetp) \ + __asm__ __volatile__("btrl %1,%0": \ + "=m" (*(__kernel_fd_set *) (fdsetp)):"r" ((int) (fd))) + +#undef __FD_ISSET +#define __FD_ISSET(fd,fdsetp) (__extension__ ({ \ + unsigned char __result; \ + __asm__ __volatile__("btl %1,%2 ; setb %0" \ + :"=q" (__result) :"r" ((int) (fd)), \ + "m" (*(__kernel_fd_set *) (fdsetp))); \ + __result; })) + +#undef __FD_ZERO +#define __FD_ZERO(fdsetp) \ +do { \ + int __d0, __d1; \ + __asm__ __volatile__("cld ; rep ; stosl" \ + :"=m" (*(__kernel_fd_set *) (fdsetp)), \ + "=&c" (__d0), "=&D" (__d1) \ + :"a" (0), "1" (__FDSET_LONGS), \ + "2" ((__kernel_fd_set *) (fdsetp)) : "memory"); \ +} while (0) + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif diff --git a/arch/x86/include/asm/processor-flags.h b/arch/x86/include/asm/processor-flags.h new file mode 100644 index 00000000000..7a3e836eb2a --- /dev/null +++ b/arch/x86/include/asm/processor-flags.h @@ -0,0 +1,100 @@ +#ifndef _ASM_X86_PROCESSOR_FLAGS_H +#define _ASM_X86_PROCESSOR_FLAGS_H +/* Various flags defined: can be included from assembler. */ + +/* + * EFLAGS bits + */ +#define X86_EFLAGS_CF 0x00000001 /* Carry Flag */ +#define X86_EFLAGS_PF 0x00000004 /* Parity Flag */ +#define X86_EFLAGS_AF 0x00000010 /* Auxillary carry Flag */ +#define X86_EFLAGS_ZF 0x00000040 /* Zero Flag */ +#define X86_EFLAGS_SF 0x00000080 /* Sign Flag */ +#define X86_EFLAGS_TF 0x00000100 /* Trap Flag */ +#define X86_EFLAGS_IF 0x00000200 /* Interrupt Flag */ +#define X86_EFLAGS_DF 0x00000400 /* Direction Flag */ +#define X86_EFLAGS_OF 0x00000800 /* Overflow Flag */ +#define X86_EFLAGS_IOPL 0x00003000 /* IOPL mask */ +#define X86_EFLAGS_NT 0x00004000 /* Nested Task */ +#define X86_EFLAGS_RF 0x00010000 /* Resume Flag */ +#define X86_EFLAGS_VM 0x00020000 /* Virtual Mode */ +#define X86_EFLAGS_AC 0x00040000 /* Alignment Check */ +#define X86_EFLAGS_VIF 0x00080000 /* Virtual Interrupt Flag */ +#define X86_EFLAGS_VIP 0x00100000 /* Virtual Interrupt Pending */ +#define X86_EFLAGS_ID 0x00200000 /* CPUID detection flag */ + +/* + * Basic CPU control in CR0 + */ +#define X86_CR0_PE 0x00000001 /* Protection Enable */ +#define X86_CR0_MP 0x00000002 /* Monitor Coprocessor */ +#define X86_CR0_EM 0x00000004 /* Emulation */ +#define X86_CR0_TS 0x00000008 /* Task Switched */ +#define X86_CR0_ET 0x00000010 /* Extension Type */ +#define X86_CR0_NE 0x00000020 /* Numeric Error */ +#define X86_CR0_WP 0x00010000 /* Write Protect */ +#define X86_CR0_AM 0x00040000 /* Alignment Mask */ +#define X86_CR0_NW 0x20000000 /* Not Write-through */ +#define X86_CR0_CD 0x40000000 /* Cache Disable */ +#define X86_CR0_PG 0x80000000 /* Paging */ + +/* + * Paging options in CR3 + */ +#define X86_CR3_PWT 0x00000008 /* Page Write Through */ +#define X86_CR3_PCD 0x00000010 /* Page Cache Disable */ + +/* + * Intel CPU features in CR4 + */ +#define X86_CR4_VME 0x00000001 /* enable vm86 extensions */ +#define X86_CR4_PVI 0x00000002 /* virtual interrupts flag enable */ +#define X86_CR4_TSD 0x00000004 /* disable time stamp at ipl 3 */ +#define X86_CR4_DE 0x00000008 /* enable debugging extensions */ +#define X86_CR4_PSE 0x00000010 /* enable page size extensions */ +#define X86_CR4_PAE 0x00000020 /* enable physical address extensions */ +#define X86_CR4_MCE 0x00000040 /* Machine check enable */ +#define X86_CR4_PGE 0x00000080 /* enable global pages */ +#define X86_CR4_PCE 0x00000100 /* enable performance counters at ipl 3 */ +#define X86_CR4_OSFXSR 0x00000200 /* enable fast FPU save and restore */ +#define X86_CR4_OSXMMEXCPT 0x00000400 /* enable unmasked SSE exceptions */ +#define X86_CR4_VMXE 0x00002000 /* enable VMX virtualization */ +#define X86_CR4_OSXSAVE 0x00040000 /* enable xsave and xrestore */ + +/* + * x86-64 Task Priority Register, CR8 + */ +#define X86_CR8_TPR 0x0000000F /* task priority register */ + +/* + * AMD and Transmeta use MSRs for configuration; see <asm/msr-index.h> + */ + +/* + * NSC/Cyrix CPU configuration register indexes + */ +#define CX86_PCR0 0x20 +#define CX86_GCR 0xb8 +#define CX86_CCR0 0xc0 +#define CX86_CCR1 0xc1 +#define CX86_CCR2 0xc2 +#define CX86_CCR3 0xc3 +#define CX86_CCR4 0xe8 +#define CX86_CCR5 0xe9 +#define CX86_CCR6 0xea +#define CX86_CCR7 0xeb +#define CX86_PCR1 0xf0 +#define CX86_DIR0 0xfe +#define CX86_DIR1 0xff +#define CX86_ARR_BASE 0xc4 +#define CX86_RCR_BASE 0xdc + +#ifdef __KERNEL__ +#ifdef CONFIG_VM86 +#define X86_VM_MASK X86_EFLAGS_VM +#else +#define X86_VM_MASK 0 /* No VM86 support */ +#endif +#endif + +#endif /* _ASM_X86_PROCESSOR_FLAGS_H */ diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h new file mode 100644 index 00000000000..22a129813cd --- /dev/null +++ b/arch/x86/include/asm/processor.h @@ -0,0 +1,32 @@ +/* + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB, daniel@omicron.se + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_PROCESSOR_H_ +#define __ASM_PROCESSOR_H_ 1 + +#define GDT_ENTRY_32BIT_CS 2 +#define GDT_ENTRY_32BIT_DS (GDT_ENTRY_32BIT_CS + 1) +#define GDT_ENTRY_16BIT_CS (GDT_ENTRY_32BIT_DS + 1) +#define GDT_ENTRY_16BIT_DS (GDT_ENTRY_16BIT_CS + 1) + +#endif diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h new file mode 100644 index 00000000000..a727dbfb057 --- /dev/null +++ b/arch/x86/include/asm/ptrace.h @@ -0,0 +1,90 @@ +#ifndef _I386_PTRACE_H +#define _I386_PTRACE_H + +#include <asm/types.h> + +#define EBX 0 +#define ECX 1 +#define EDX 2 +#define ESI 3 +#define EDI 4 +#define EBP 5 +#define EAX 6 +#define DS 7 +#define ES 8 +#define FS 9 +#define GS 10 +#define ORIG_EAX 11 +#define EIP 12 +#define CS 13 +#define EFL 14 +#define UESP 15 +#define SS 16 +#define FRAME_SIZE 17 + +/* this struct defines the way the registers are stored on the + stack during a system call. */ + +struct pt_regs { + long ebx; + long ecx; + long edx; + long esi; + long edi; + long ebp; + long eax; + int xds; + int xes; + int xfs; + int xgs; + long orig_eax; + long eip; + int xcs; + long eflags; + long esp; + int xss; +} __attribute__ ((packed)); + +struct irq_regs { + /* Pushed by irq_common_entry */ + long ebx; + long ecx; + long edx; + long esi; + long edi; + long ebp; + long esp; + long eax; + long xds; + long xes; + long xfs; + long xgs; + long xss; + /* Pushed by vector handler (irq_<num>) */ + long irq_id; + /* Pushed by cpu in response to interrupt */ + long eip; + long xcs; + long eflags; +} __attribute__ ((packed)); + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 +#define PTRACE_GETFPXREGS 18 +#define PTRACE_SETFPXREGS 19 + +#define PTRACE_SETOPTIONS 21 + +/* options set using PTRACE_SETOPTIONS */ +#define PTRACE_O_TRACESYSGOOD 0x00000001 + +#ifdef __KERNEL__ +#define user_mode(regs) ((VM_MASK & (regs)->eflags) || (3 & (regs)->xcs)) +#define instruction_pointer(regs) ((regs)->eip) +extern void show_regs(struct pt_regs *); +#endif + +#endif diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h new file mode 100644 index 00000000000..9177e4ec0d4 --- /dev/null +++ b/arch/x86/include/asm/realmode.h @@ -0,0 +1,32 @@ +/* + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB, daniel@omicron.se + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_REALMODE_H_ +#define __ASM_REALMODE_H_ +#include <asm/ptrace.h> + +int bios_setup(void); +int enter_realmode(u16 seg, u16 off, struct pt_regs *in, struct pt_regs *out); +int enter_realmode_int(u8 lvl, struct pt_regs *in, struct pt_regs *out); + +#endif diff --git a/arch/x86/include/asm/string.h b/arch/x86/include/asm/string.h new file mode 100644 index 00000000000..3643a79fdfc --- /dev/null +++ b/arch/x86/include/asm/string.h @@ -0,0 +1,32 @@ +#ifndef __ASM_I386_STRING_H +#define __ASM_I386_STRING_H + +/* + * We don't do inline string functions, since the + * optimised inline asm versions are not small. + */ +#undef __HAVE_ARCH_STRNCPY +extern char *strncpy(char *__dest, __const__ char *__src, __kernel_size_t __n); + +#undef __HAVE_ARCH_STRRCHR +extern char * strrchr(const char * s, int c); + +#undef __HAVE_ARCH_STRCHR +extern char * strchr(const char * s, int c); + +#undef __HAVE_ARCH_MEMCPY +extern void * memcpy(void *, const void *, __kernel_size_t); + +#undef __HAVE_ARCH_MEMMOVE +extern void * memmove(void *, const void *, __kernel_size_t); + +#undef __HAVE_ARCH_MEMCHR +extern void * memchr(const void *, int, __kernel_size_t); + +#undef __HAVE_ARCH_MEMSET +extern void * memset(void *, int, __kernel_size_t); + +#undef __HAVE_ARCH_MEMZERO +extern void memzero(void *ptr, __kernel_size_t n); + +#endif diff --git a/arch/x86/include/asm/types.h b/arch/x86/include/asm/types.h new file mode 100644 index 00000000000..9a40e383eb3 --- /dev/null +++ b/arch/x86/include/asm/types.h @@ -0,0 +1,53 @@ +#ifndef __ASM_I386_TYPES_H +#define __ASM_I386_TYPES_H + +typedef unsigned short umode_t; + +/* + * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the + * header files exported to user space + */ + +typedef __signed__ char __s8; +typedef unsigned char __u8; + +typedef __signed__ short __s16; +typedef unsigned short __u16; + +typedef __signed__ int __s32; +typedef unsigned int __u32; + +#if defined(__GNUC__) +__extension__ typedef __signed__ long long __s64; +__extension__ typedef unsigned long long __u64; +#endif + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +typedef signed char s8; +typedef unsigned char u8; + +typedef signed short s16; +typedef unsigned short u16; + +typedef signed int s32; +typedef unsigned int u32; + +typedef signed long long s64; +typedef unsigned long long u64; + +#define BITS_PER_LONG 32 + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; + +typedef unsigned long phys_addr_t; +typedef unsigned long phys_size_t; + +#endif /* __KERNEL__ */ + +#endif diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h new file mode 100644 index 00000000000..944e1a20057 --- /dev/null +++ b/arch/x86/include/asm/u-boot-x86.h @@ -0,0 +1,59 @@ +/* + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB, daniel@omicron.se. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _U_BOOT_I386_H_ +#define _U_BOOT_I386_H_ 1 + +/* cpu/.../cpu.c */ +int x86_cpu_init_r(void); +int cpu_init_r(void); +int x86_cpu_init_f(void); +int cpu_init_f(void); + +/* cpu/.../timer.c */ +void timer_isr(void *); +typedef void (timer_fnc_t) (void); +int register_timer_isr (timer_fnc_t *isr_func); + +/* Architecture specific - can be in arch/x86/cpu/, arch/x86/lib/, or $(BOARD)/ */ +int timer_init(void); +int dram_init_f(void); + +/* cpu/.../interrupts.c */ +int cpu_init_interrupts(void); + +/* board/.../... */ +int board_init(void); +int dram_init(void); + +void setup_pcat_compatibility(void); + +void isa_unmap_rom(u32 addr); +u32 isa_map_rom(u32 bus_addr, int size); + +/* arch/x86/lib/... */ +int video_bios_init(void); +int video_init(void); + + +#endif /* _U_BOOT_I386_H_ */ diff --git a/arch/x86/include/asm/u-boot.h b/arch/x86/include/asm/u-boot.h new file mode 100644 index 00000000000..a43b3aadedd --- /dev/null +++ b/arch/x86/include/asm/u-boot.h @@ -0,0 +1,61 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Alex Zuepke <azu@sysgo.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + ******************************************************************** + * NOTE: This header file defines an interface to U-Boot. Including + * this (unmodified) header file in another file is considered normal + * use of U-Boot, and does *not* fall under the heading of "derived + * work". + ******************************************************************** + */ + +#ifndef _U_BOOT_H_ +#define _U_BOOT_H_ 1 + +typedef struct bd_info { + unsigned long bi_memstart; /* start of DRAM memory */ + phys_size_t bi_memsize; /* size of DRAM memory in bytes */ + unsigned long bi_flashstart; /* start of FLASH memory */ + unsigned long bi_flashsize; /* size of FLASH memory */ + unsigned long bi_flashoffset; /* reserved area for startup monitor */ + unsigned long bi_sramstart; /* start of SRAM memory */ + unsigned long bi_sramsize; /* size of SRAM memory */ + unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ + unsigned long bi_ip_addr; /* IP Address */ + unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ + unsigned long bi_intfreq; /* Internal Freq, in MHz */ + unsigned long bi_busfreq; /* Bus Freq, in MHz */ + unsigned int bi_baudrate; /* Console Baudrate */ + unsigned long bi_boot_params; /* where this board expects params */ + struct /* RAM configuration */ + { + ulong start; + ulong size; + }bi_dram[CONFIG_NR_DRAM_BANKS]; +} bd_t; + +#endif /* _U_BOOT_H_ */ diff --git a/arch/x86/include/asm/unaligned.h b/arch/x86/include/asm/unaligned.h new file mode 100644 index 00000000000..6cecbbb2111 --- /dev/null +++ b/arch/x86/include/asm/unaligned.h @@ -0,0 +1 @@ +#include <asm-generic/unaligned.h> diff --git a/arch/x86/include/asm/video/edid.h b/arch/x86/include/asm/video/edid.h new file mode 100644 index 00000000000..928c342b33d --- /dev/null +++ b/arch/x86/include/asm/video/edid.h @@ -0,0 +1,16 @@ +#ifndef __linux_video_edid_h__ +#define __linux_video_edid_h__ + +#if !defined(__KERNEL__) || defined(CONFIG_X86) + +struct edid_info { + unsigned char dummy[128]; +}; + +#ifdef __KERNEL__ +extern struct edid_info edid_info; +#endif /* __KERNEL__ */ + +#endif + +#endif /* __linux_video_edid_h__ */ diff --git a/arch/x86/include/asm/zimage.h b/arch/x86/include/asm/zimage.h new file mode 100644 index 00000000000..b6266e456a5 --- /dev/null +++ b/arch/x86/include/asm/zimage.h @@ -0,0 +1,74 @@ +/* + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB, daniel@omicron.se + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_ZIMAGE_H_ +#define _ASM_ZIMAGE_H_ + +/* linux i386 zImage/bzImage header. Offsets relative to + * the start of the image */ + +#define CMD_LINE_MAGIC_OFF 0x020 /* Magic 0xa33f if the offset below is valid */ +#define CMD_LINE_OFFSET_OFF 0x022 /* Offset to comandline */ +#define SETUP_SECTS_OFF 0x1F1 /* The size of the setup in sectors */ +#define ROOT_FLAGS_OFF 0x1F2 /* If set, the root is mounted readonly */ +#define VID_MODE_OFF 0x1FA /* Video mode control */ +#define ROOT_DEV_OFF 0x1FC /* Default root device number */ +#define BOOT_FLAG_OFF 0x1FE /* 0xAA55 magic number */ +#define HEADER_OFF 0x202 /* Magic signature "HdrS" */ +#define VERSION_OFF 0x206 /* Boot protocol version supported */ +#define REALMODE_SWTCH_OFF 0x208 /* Boot loader hook (see below) */ +#define START_SYS_OFF 0x20C /* Points to kernel version string */ +#define TYPE_OF_LOADER_OFF 0x210 /* Boot loader identifier */ +#define LOADFLAGS_OFF 0x211 /* Boot protocol option flags */ +#define SETUP_MOVE_SIZE_OFF 0x212 /* Move to high memory size (used with hooks) */ +#define CODE32_START_OFF 0x214 /* Boot loader hook (see below) */ +#define RAMDISK_IMAGE_OFF 0x218 /* initrd load address (set by boot loader) */ +#define RAMDISK_SIZE_OFF 0x21C /* initrd size (set by boot loader) */ +#define HEAP_END_PTR_OFF 0x224 /* Free memory after setup end */ +#define CMD_LINE_PTR_OFF 0x228 /* 32-bit pointer to the kernel command line */ + + +#define HEAP_FLAG 0x80 +#define BIG_KERNEL_FLAG 0x01 + +/* magic numbers */ +#define KERNEL_MAGIC 0xaa55 +#define KERNEL_V2_MAGIC 0x53726448 +#define COMMAND_LINE_MAGIC 0xA33F + +/* limits */ +#define BZIMAGE_MAX_SIZE 15*1024*1024 /* 15MB */ +#define ZIMAGE_MAX_SIZE 512*1024 /* 512k */ +#define SETUP_MAX_SIZE 32768 + +#define SETUP_START_OFFSET 0x200 +#define BZIMAGE_LOAD_ADDR 0x100000 +#define ZIMAGE_LOAD_ADDR 0x10000 + +void *load_zimage(char *image, unsigned long kernel_size, + unsigned long initrd_addr, unsigned long initrd_size, + int auto_boot); + +void boot_zimage(void *setup_base); + +#endif |