Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'

18 files changed, 987 insertions, 869 deletions

diff --git a/arch/arm/cpu/arm720t/tegra114/cpu.c b/arch/arm/cpu/arm720t/tegra114/cpu.c
index 5962e15b4f3..6a94179d4aa 100644
--- a/arch/arm/cpu/arm720t/tegra114/cpu.c
+++ b/arch/arm/cpu/arm720t/tegra114/cpu.c
@@ -201,6 +201,7 @@ void t114_init_clocks(void)
 	reset_set_enable(PERIPH_ID_MSELECT, 0);
 	reset_set_enable(PERIPH_ID_EMC1, 0);
 	reset_set_enable(PERIPH_ID_MC1, 0);
+	reset_set_enable(PERIPH_ID_DVFS, 0);
 
 	debug("t114_init_clocks exit\n");
 }
@@ -269,6 +270,8 @@ void powerup_cpus(void)
 
 void start_cpu(u32 reset_vector)
 {
+	u32 imme, inst;
+
 	debug("start_cpu entry, reset_vector = %x\n", reset_vector);
 
 	t114_init_clocks();
@@ -285,12 +288,38 @@ void start_cpu(u32 reset_vector)
 	/* Take CPU(s) out of reset */
 	remove_cpu_resets();
 
+	/* Set the entry point for CPU execution from reset */
+
 	/*
-	 * Set the entry point for CPU execution from reset,
-	 *  if it's a non-zero value.
+	 * A01P with patched boot ROM; vector hard-coded to 0x4003fffc.
+	 * See nvbug 1193357 for details.
 	 */
-	if (reset_vector)
-		writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
+
+	/* mov r0, #lsb(reset_vector) */
+	imme = reset_vector & 0xffff;
+	inst = imme & 0xfff;
+	inst |= ((imme >> 12) << 16);
+	inst |= 0xe3000000;
+	writel(inst, 0x4003fff0);
+
+	/* movt r0, #msb(reset_vector) */
+	imme = (reset_vector >> 16) & 0xffff;
+	inst = imme & 0xfff;
+	inst |= ((imme >> 12) << 16);
+	inst |= 0xe3400000;
+	writel(inst, 0x4003fff4);
+
+	/* bx r0 */
+	writel(0xe12fff10, 0x4003fff8);
+
+	/* b -12 */
+	imme = (u32)-20;
+	inst = (imme >> 2) & 0xffffff;
+	inst |= 0xea000000;
+	writel(inst, 0x4003fffc);
+
+	/* Write to orignal location for compatibility */
+	writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
 
 	/* If the CPU(s) don't already have power, power 'em up */
 	powerup_cpus();
diff --git a/arch/arm/cpu/armv7/tegra20/Makefile b/arch/arm/cpu/armv7/tegra20/Makefile
index 54ed8c48b40..c8a8504e16a 100644
--- a/arch/arm/cpu/armv7/tegra20/Makefile
+++ b/arch/arm/cpu/armv7/tegra20/Makefile
@@ -27,7 +27,6 @@ include $(TOPDIR)/config.mk
 
 LIB	=  $(obj)lib$(SOC).o
 
-COBJS-$(CONFIG_USB_EHCI_TEGRA) += usb.o
 COBJS-$(CONFIG_PWM_TEGRA) += pwm.o
 COBJS-$(CONFIG_VIDEO_TEGRA) += display.o
 
diff --git a/arch/arm/cpu/armv7/tegra20/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c
deleted file mode 100644
index 1bccf2b0b2c..00000000000
--- a/arch/arm/cpu/armv7/tegra20/usb.c
+++ /dev/null
@@ -1,567 +0,0 @@
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm-generic/gpio.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/tegra.h>
-#include <asm/arch/usb.h>
-#include <usb/ulpi.h>
-#include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/sys_proto.h>
-#include <asm/arch-tegra/uart.h>
-#include <libfdt.h>
-#include <fdtdec.h>
-
-#ifdef CONFIG_USB_ULPI
-	#ifndef CONFIG_USB_ULPI_VIEWPORT
-	#error	"To use CONFIG_USB_ULPI on Tegra Boards you have to also \
-			define CONFIG_USB_ULPI_VIEWPORT"
-	#endif
-#endif
-
-enum {
-	USB_PORTS_MAX	= 4,			/* Maximum ports we allow */
-};
-
-/* Parameters we need for USB */
-enum {
-	PARAM_DIVN,                     /* PLL FEEDBACK DIVIDer */
-	PARAM_DIVM,                     /* PLL INPUT DIVIDER */
-	PARAM_DIVP,                     /* POST DIVIDER (2^N) */
-	PARAM_CPCON,                    /* BASE PLLC CHARGE Pump setup ctrl */
-	PARAM_LFCON,                    /* BASE PLLC LOOP FILter setup ctrl */
-	PARAM_ENABLE_DELAY_COUNT,       /* PLL-U Enable Delay Count */
-	PARAM_STABLE_COUNT,             /* PLL-U STABLE count */
-	PARAM_ACTIVE_DELAY_COUNT,       /* PLL-U Active delay count */
-	PARAM_XTAL_FREQ_COUNT,          /* PLL-U XTAL frequency count */
-	PARAM_DEBOUNCE_A_TIME,          /* 10MS DELAY for BIAS_DEBOUNCE_A */
-	PARAM_BIAS_TIME,                /* 20US DELAY AFter bias cell op */
-
-	PARAM_COUNT
-};
-
-/* Possible port types (dual role mode) */
-enum dr_mode {
-	DR_MODE_NONE = 0,
-	DR_MODE_HOST,		/* supports host operation */
-	DR_MODE_DEVICE,		/* supports device operation */
-	DR_MODE_OTG,		/* supports both */
-};
-
-/* Information about a USB port */
-struct fdt_usb {
-	struct usb_ctlr *reg;	/* address of registers in physical memory */
-	unsigned utmi:1;	/* 1 if port has external tranceiver, else 0 */
-	unsigned ulpi:1;	/* 1 if port has external ULPI transceiver */
-	unsigned enabled:1;	/* 1 to enable, 0 to disable */
-	unsigned has_legacy_mode:1; /* 1 if this port has legacy mode */
-	enum dr_mode dr_mode;	/* dual role mode */
-	enum periph_id periph_id;/* peripheral id */
-	struct fdt_gpio_state vbus_gpio;	/* GPIO for vbus enable */
-	struct fdt_gpio_state phy_reset_gpio; /* GPIO to reset ULPI phy */
-};
-
-static struct fdt_usb port[USB_PORTS_MAX];	/* List of valid USB ports */
-static unsigned port_count;			/* Number of available ports */
-
-/*
- * This table has USB timing parameters for each Oscillator frequency we
- * support. There are four sets of values:
- *
- * 1. PLLU configuration information (reference clock is osc/clk_m and
- * PLLU-FOs are fixed at 12MHz/60MHz/480MHz).
- *
- *  Reference frequency     13.0MHz      19.2MHz      12.0MHz      26.0MHz
- *  ----------------------------------------------------------------------
- *      DIVN                960 (0x3c0)  200 (0c8)    960 (3c0h)   960 (3c0)
- *      DIVM                13 (0d)      4 (04)       12 (0c)      26 (1a)
- * Filter frequency (MHz)   1            4.8          6            2
- * CPCON                    1100b        0011b        1100b        1100b
- * LFCON0                   0            0            0            0
- *
- * 2. PLL CONFIGURATION & PARAMETERS for different clock generators:
- *
- * Reference frequency     13.0MHz         19.2MHz         12.0MHz     26.0MHz
- * ---------------------------------------------------------------------------
- * PLLU_ENABLE_DLY_COUNT   02 (0x02)       03 (03)         02 (02)     04 (04)
- * PLLU_STABLE_COUNT       51 (33)         75 (4B)         47 (2F)    102 (66)
- * PLL_ACTIVE_DLY_COUNT    05 (05)         06 (06)         04 (04)     09 (09)
- * XTAL_FREQ_COUNT        127 (7F)        187 (BB)        118 (76)    254 (FE)
- *
- * 3. Debounce values IdDig, Avalid, Bvalid, VbusValid, VbusWakeUp, and
- * SessEnd. Each of these signals have their own debouncer and for each of
- * those one out of two debouncing times can be chosen (BIAS_DEBOUNCE_A or
- * BIAS_DEBOUNCE_B).
- *
- * The values of DEBOUNCE_A and DEBOUNCE_B are calculated as follows:
- *    0xffff -> No debouncing at all
- *    <n> ms = <n> *1000 / (1/19.2MHz) / 4
- *
- * So to program a 1 ms debounce for BIAS_DEBOUNCE_A, we have:
- * BIAS_DEBOUNCE_A[15:0] = 1000 * 19.2 / 4  = 4800 = 0x12c0
- *
- * We need to use only DebounceA for BOOTROM. We don't need the DebounceB
- * values, so we can keep those to default.
- *
- * 4. The 20 microsecond delay after bias cell operation.
- */
-static const unsigned usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
-	/* DivN, DivM, DivP, CPCON, LFCON, Delays             Debounce, Bias */
-	{ 0x3C0, 0x0D, 0x00, 0xC,   0,  0x02, 0x33, 0x05, 0x7F, 0x7EF4, 5 },
-	{ 0x0C8, 0x04, 0x00, 0x3,   0,  0x03, 0x4B, 0x06, 0xBB, 0xBB80, 7 },
-	{ 0x3C0, 0x0C, 0x00, 0xC,   0,  0x02, 0x2F, 0x04, 0x76, 0x7530, 5 },
-	{ 0x3C0, 0x1A, 0x00, 0xC,   0,  0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 }
-};
-
-/* UTMIP Idle Wait Delay */
-static const u8 utmip_idle_wait_delay = 17;
-
-/* UTMIP Elastic limit */
-static const u8 utmip_elastic_limit = 16;
-
-/* UTMIP High Speed Sync Start Delay */
-static const u8 utmip_hs_sync_start_delay = 9;
-
-/* Put the port into host mode */
-static void set_host_mode(struct fdt_usb *config)
-{
-	/*
-	 * If we are an OTG port, check if remote host is driving VBus and
-	 * bail out in this case.
-	 */
-	if (config->dr_mode == DR_MODE_OTG &&
-		(readl(&config->reg->phy_vbus_sensors) & VBUS_VLD_STS))
-		return;
-
-	/*
-	 * If not driving, we set the GPIO to enable VBUS. We assume
-	 * that the pinmux is set up correctly for this.
-	 */
-	if (fdt_gpio_isvalid(&config->vbus_gpio)) {
-		fdtdec_setup_gpio(&config->vbus_gpio);
-		gpio_direction_output(config->vbus_gpio.gpio,
-			(config->vbus_gpio.flags & FDT_GPIO_ACTIVE_LOW) ?
-				 0 : 1);
-		debug("set_host_mode: GPIO %d %s\n", config->vbus_gpio.gpio,
-			(config->vbus_gpio.flags & FDT_GPIO_ACTIVE_LOW) ?
-				"low" : "high");
-	}
-}
-
-void usbf_reset_controller(struct fdt_usb *config, struct usb_ctlr *usbctlr)
-{
-	/* Reset the USB controller with 2us delay */
-	reset_periph(config->periph_id, 2);
-
-	/*
-	 * Set USB1_NO_LEGACY_MODE to 1, Registers are accessible under
-	 * base address
-	 */
-	if (config->has_legacy_mode)
-		setbits_le32(&usbctlr->usb1_legacy_ctrl, USB1_NO_LEGACY_MODE);
-
-	/* Put UTMIP1/3 in reset */
-	setbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET);
-
-	/* Enable the UTMIP PHY */
-	if (config->utmi)
-		setbits_le32(&usbctlr->susp_ctrl, UTMIP_PHY_ENB);
-
-	/*
-	 * TODO: where do we take the USB1 out of reset? The old code would
-	 * take USB3 out of reset, but not USB1. This code doesn't do either.
-	 */
-}
-
-/* set up the UTMI USB controller with the parameters provided */
-static int init_utmi_usb_controller(struct fdt_usb *config,
-				struct usb_ctlr *usbctlr, const u32 timing[])
-{
-	u32 val;
-	int loop_count;
-
-	clock_enable(config->periph_id);
-
-	/* Reset the usb controller */
-	usbf_reset_controller(config, usbctlr);
-
-	/* Stop crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN low */
-	clrbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN);
-
-	/* Follow the crystal clock disable by >100ns delay */
-	udelay(1);
-
-	/*
-	 * To Use the A Session Valid for cable detection logic, VBUS_WAKEUP
-	 * mux must be switched to actually use a_sess_vld threshold.
-	 */
-	if (fdt_gpio_isvalid(&config->vbus_gpio)) {
-		clrsetbits_le32(&usbctlr->usb1_legacy_ctrl,
-			VBUS_SENSE_CTL_MASK,
-			VBUS_SENSE_CTL_A_SESS_VLD << VBUS_SENSE_CTL_SHIFT);
-	}
-
-	/*
-	 * PLL Delay CONFIGURATION settings. The following parameters control
-	 * the bring up of the plls.
-	 */
-	val = readl(&usbctlr->utmip_misc_cfg1);
-	clrsetbits_le32(&val, UTMIP_PLLU_STABLE_COUNT_MASK,
-		timing[PARAM_STABLE_COUNT] << UTMIP_PLLU_STABLE_COUNT_SHIFT);
-	clrsetbits_le32(&val, UTMIP_PLL_ACTIVE_DLY_COUNT_MASK,
-		timing[PARAM_ACTIVE_DELAY_COUNT] <<
-			UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT);
-	writel(val, &usbctlr->utmip_misc_cfg1);
-
-	/* Set PLL enable delay count and crystal frequency count */
-	val = readl(&usbctlr->utmip_pll_cfg1);
-	clrsetbits_le32(&val, UTMIP_PLLU_ENABLE_DLY_COUNT_MASK,
-		timing[PARAM_ENABLE_DELAY_COUNT] <<
-			UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT);
-	clrsetbits_le32(&val, UTMIP_XTAL_FREQ_COUNT_MASK,
-		timing[PARAM_XTAL_FREQ_COUNT] <<
-			UTMIP_XTAL_FREQ_COUNT_SHIFT);
-	writel(val, &usbctlr->utmip_pll_cfg1);
-
-	/* Setting the tracking length time */
-	clrsetbits_le32(&usbctlr->utmip_bias_cfg1,
-		UTMIP_BIAS_PDTRK_COUNT_MASK,
-		timing[PARAM_BIAS_TIME] << UTMIP_BIAS_PDTRK_COUNT_SHIFT);
-
-	/* Program debounce time for VBUS to become valid */
-	clrsetbits_le32(&usbctlr->utmip_debounce_cfg0,
-		UTMIP_DEBOUNCE_CFG0_MASK,
-		timing[PARAM_DEBOUNCE_A_TIME] << UTMIP_DEBOUNCE_CFG0_SHIFT);
-
-	setbits_le32(&usbctlr->utmip_tx_cfg0, UTMIP_FS_PREAMBLE_J);
-
-	/* Disable battery charge enabling bit */
-	setbits_le32(&usbctlr->utmip_bat_chrg_cfg0, UTMIP_PD_CHRG);
-
-	clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_XCVR_LSBIAS_SE);
-	setbits_le32(&usbctlr->utmip_spare_cfg0, FUSE_SETUP_SEL);
-
-	/*
-	 * Configure the UTMIP_IDLE_WAIT and UTMIP_ELASTIC_LIMIT
-	 * Setting these fields, together with default values of the
-	 * other fields, results in programming the registers below as
-	 * follows:
-	 *         UTMIP_HSRX_CFG0 = 0x9168c000
-	 *         UTMIP_HSRX_CFG1 = 0x13
-	 */
-
-	/* Set PLL enable delay count and Crystal frequency count */
-	val = readl(&usbctlr->utmip_hsrx_cfg0);
-	clrsetbits_le32(&val, UTMIP_IDLE_WAIT_MASK,
-		utmip_idle_wait_delay << UTMIP_IDLE_WAIT_SHIFT);
-	clrsetbits_le32(&val, UTMIP_ELASTIC_LIMIT_MASK,
-		utmip_elastic_limit << UTMIP_ELASTIC_LIMIT_SHIFT);
-	writel(val, &usbctlr->utmip_hsrx_cfg0);
-
-	/* Configure the UTMIP_HS_SYNC_START_DLY */
-	clrsetbits_le32(&usbctlr->utmip_hsrx_cfg1,
-		UTMIP_HS_SYNC_START_DLY_MASK,
-		utmip_hs_sync_start_delay << UTMIP_HS_SYNC_START_DLY_SHIFT);
-
-	/* Preceed the crystal clock disable by >100ns delay. */
-	udelay(1);
-
-	/* Resuscitate crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN */
-	setbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN);
-
-	/* Finished the per-controller init. */
-
-	/* De-assert UTMIP_RESET to bring out of reset. */
-	clrbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET);
-
-	/* Wait for the phy clock to become valid in 100 ms */
-	for (loop_count = 100000; loop_count != 0; loop_count--) {
-		if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID)
-			break;
-		udelay(1);
-	}
-	if (!loop_count)
-		return -1;
-
-	/* Disable ICUSB FS/LS transceiver */
-	clrbits_le32(&usbctlr->icusb_ctrl, IC_ENB1);
-
-	/* Select UTMI parallel interface */
-	clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK,
-			PTS_UTMI << PTS_SHIFT);
-	clrbits_le32(&usbctlr->port_sc1, STS);
-
-	/* Deassert power down state */
-	clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_FORCE_PD_POWERDOWN |
-		UTMIP_FORCE_PD2_POWERDOWN | UTMIP_FORCE_PDZI_POWERDOWN);
-	clrbits_le32(&usbctlr->utmip_xcvr_cfg1, UTMIP_FORCE_PDDISC_POWERDOWN |
-		UTMIP_FORCE_PDCHRP_POWERDOWN | UTMIP_FORCE_PDDR_POWERDOWN);
-
-	return 0;
-}
-
-#ifdef CONFIG_USB_ULPI
-/* if board file does not set a ULPI reference frequency we default to 24MHz */
-#ifndef CONFIG_ULPI_REF_CLK
-#define CONFIG_ULPI_REF_CLK 24000000
-#endif
-
-/* set up the ULPI USB controller with the parameters provided */
-static int init_ulpi_usb_controller(struct fdt_usb *config,
-				struct usb_ctlr *usbctlr)
-{
-	u32 val;
-	int loop_count;
-	struct ulpi_viewport ulpi_vp;
-
-	/* set up ULPI reference clock on pllp_out4 */
-	clock_enable(PERIPH_ID_DEV2_OUT);
-	clock_set_pllout(CLOCK_ID_PERIPH, PLL_OUT4, CONFIG_ULPI_REF_CLK);
-
-	/* reset ULPI phy */
-	if (fdt_gpio_isvalid(&config->phy_reset_gpio)) {
-		fdtdec_setup_gpio(&config->phy_reset_gpio);
-		gpio_direction_output(config->phy_reset_gpio.gpio, 0);
-		mdelay(5);
-		gpio_set_value(config->phy_reset_gpio.gpio, 1);
-	}
-
-	/* Reset the usb controller */
-	clock_enable(config->periph_id);
-	usbf_reset_controller(config, usbctlr);
-
-	/* enable pinmux bypass */
-	setbits_le32(&usbctlr->ulpi_timing_ctrl_0,
-			ULPI_CLKOUT_PINMUX_BYP | ULPI_OUTPUT_PINMUX_BYP);
-
-	/* Select ULPI parallel interface */
-	clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, PTS_ULPI << PTS_SHIFT);
-
-	/* enable ULPI transceiver */
-	setbits_le32(&usbctlr->susp_ctrl, ULPI_PHY_ENB);
-
-	/* configure ULPI transceiver timings */
-	val = 0;
-	writel(val, &usbctlr->ulpi_timing_ctrl_1);
-
-	val |= ULPI_DATA_TRIMMER_SEL(4);
-	val |= ULPI_STPDIRNXT_TRIMMER_SEL(4);
-	val |= ULPI_DIR_TRIMMER_SEL(4);
-	writel(val, &usbctlr->ulpi_timing_ctrl_1);
-	udelay(10);
-
-	val |= ULPI_DATA_TRIMMER_LOAD;
-	val |= ULPI_STPDIRNXT_TRIMMER_LOAD;
-	val |= ULPI_DIR_TRIMMER_LOAD;
-	writel(val, &usbctlr->ulpi_timing_ctrl_1);
-
-	/* set up phy for host operation with external vbus supply */
-	ulpi_vp.port_num = 0;
-	ulpi_vp.viewport_addr = (u32)&usbctlr->ulpi_viewport;
-
-	if (ulpi_init(&ulpi_vp)) {
-		printf("Tegra ULPI viewport init failed\n");
-		return -1;
-	}
-
-	ulpi_set_vbus(&ulpi_vp, 1, 1);
-	ulpi_set_vbus_indicator(&ulpi_vp, 1, 1, 0);
-
-	/* enable wakeup events */
-	setbits_le32(&usbctlr->port_sc1, WKCN | WKDS | WKOC);
-
-	/* Enable and wait for the phy clock to become valid in 100 ms */
-	setbits_le32(&usbctlr->susp_ctrl, USB_SUSP_CLR);
-	for (loop_count = 100000; loop_count != 0; loop_count--) {
-		if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID)
-			break;
-		udelay(1);
-	}
-	if (!loop_count)
-		return -1;
-	clrbits_le32(&usbctlr->susp_ctrl, USB_SUSP_CLR);
-
-	return 0;
-}
-#else
-static int init_ulpi_usb_controller(struct fdt_usb *config,
-				struct usb_ctlr *usbctlr)
-{
-	printf("No code to set up ULPI controller, please enable"
-			"CONFIG_USB_ULPI and CONFIG_USB_ULPI_VIEWPORT");
-	return -1;
-}
-#endif
-
-static void config_clock(const u32 timing[])
-{
-	clock_start_pll(CLOCK_ID_USB,
-		timing[PARAM_DIVM], timing[PARAM_DIVN], timing[PARAM_DIVP],
-		timing[PARAM_CPCON], timing[PARAM_LFCON]);
-}
-
-/**
- * Add a new USB port to the list of available ports.
- *
- * @param config	USB port configuration
- * @return 0 if ok, -1 if error (too many ports)
- */
-static int add_port(struct fdt_usb *config, const u32 timing[])
-{
-	struct usb_ctlr *usbctlr = config->reg;
-
-	if (port_count == USB_PORTS_MAX) {
-		printf("tegrausb: Cannot register more than %d ports\n",
-		      USB_PORTS_MAX);
-		return -1;
-	}
-
-	if (config->utmi && init_utmi_usb_controller(config, usbctlr, timing)) {
-		printf("tegrausb: Cannot init port\n");
-		return -1;
-	}
-
-	if (config->ulpi && init_ulpi_usb_controller(config, usbctlr)) {
-		printf("tegrausb: Cannot init port\n");
-		return -1;
-	}
-
-	port[port_count++] = *config;
-
-	return 0;
-}
-
-int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor)
-{
-	struct usb_ctlr *usbctlr;
-
-	if (portnum >= port_count)
-		return -1;
-	set_host_mode(&port[portnum]);
-
-	usbctlr = port[portnum].reg;
-	*hccr = (u32)&usbctlr->cap_length;
-	*hcor = (u32)&usbctlr->usb_cmd;
-	return 0;
-}
-
-int tegrausb_stop_port(int portnum)
-{
-	struct usb_ctlr *usbctlr;
-
-	usbctlr = port[portnum].reg;
-
-	/* Stop controller */
-	writel(0, &usbctlr->usb_cmd);
-	udelay(1000);
-
-	/* Initiate controller reset */
-	writel(2, &usbctlr->usb_cmd);
-	udelay(1000);
-
-	return 0;
-}
-
-int fdt_decode_usb(const void *blob, int node, unsigned osc_frequency_mhz,
-		   struct fdt_usb *config)
-{
-	const char *phy, *mode;
-
-	config->reg = (struct usb_ctlr *)fdtdec_get_addr(blob, node, "reg");
-	mode = fdt_getprop(blob, node, "dr_mode", NULL);
-	if (mode) {
-		if (0 == strcmp(mode, "host"))
-			config->dr_mode = DR_MODE_HOST;
-		else if (0 == strcmp(mode, "peripheral"))
-			config->dr_mode = DR_MODE_DEVICE;
-		else if (0 == strcmp(mode, "otg"))
-			config->dr_mode = DR_MODE_OTG;
-		else {
-			debug("%s: Cannot decode dr_mode '%s'\n", __func__,
-			      mode);
-			return -FDT_ERR_NOTFOUND;
-		}
-	} else {
-		config->dr_mode = DR_MODE_HOST;
-	}
-
-	phy = fdt_getprop(blob, node, "phy_type", NULL);
-	config->utmi = phy && 0 == strcmp("utmi", phy);
-	config->ulpi = phy && 0 == strcmp("ulpi", phy);
-	config->enabled = fdtdec_get_is_enabled(blob, node);
-	config->has_legacy_mode = fdtdec_get_bool(blob, node,
-						  "nvidia,has-legacy-mode");
-	config->periph_id = clock_decode_periph_id(blob, node);
-	if (config->periph_id == PERIPH_ID_NONE) {
-		debug("%s: Missing/invalid peripheral ID\n", __func__);
-		return -FDT_ERR_NOTFOUND;
-	}
-	fdtdec_decode_gpio(blob, node, "nvidia,vbus-gpio", &config->vbus_gpio);
-	fdtdec_decode_gpio(blob, node, "nvidia,phy-reset-gpio",
-			&config->phy_reset_gpio);
-	debug("enabled=%d, legacy_mode=%d, utmi=%d, ulpi=%d, periph_id=%d, "
-		"vbus=%d, phy_reset=%d, dr_mode=%d\n",
-		config->enabled, config->has_legacy_mode, config->utmi,
-		config->ulpi, config->periph_id, config->vbus_gpio.gpio,
-		config->phy_reset_gpio.gpio, config->dr_mode);
-
-	return 0;
-}
-
-int board_usb_init(const void *blob)
-{
-	struct fdt_usb config;
-	unsigned osc_freq = clock_get_rate(CLOCK_ID_OSC);
-	enum clock_osc_freq freq;
-	int node_list[USB_PORTS_MAX];
-	int node, count, i;
-
-	/* Set up the USB clocks correctly based on our oscillator frequency */
-	freq = clock_get_osc_freq();
-	config_clock(usb_pll[freq]);
-
-	/* count may return <0 on error */
-	count = fdtdec_find_aliases_for_id(blob, "usb",
-			COMPAT_NVIDIA_TEGRA20_USB, node_list, USB_PORTS_MAX);
-	for (i = 0; i < count; i++) {
-		debug("USB %d: ", i);
-		node = node_list[i];
-		if (!node)
-			continue;
-		if (fdt_decode_usb(blob, node, osc_freq, &config)) {
-			debug("Cannot decode USB node %s\n",
-			      fdt_get_name(blob, node, NULL));
-			return -1;
-		}
-
-		if (add_port(&config, usb_pll[freq]))
-			return -1;
-		set_host_mode(&config);
-	}
-
-	return 0;
-}
diff --git a/arch/arm/cpu/tegra114-common/pinmux.c b/arch/arm/cpu/tegra114-common/pinmux.c
index 52b3ec47aab..4983a05090a 100644
--- a/arch/arm/cpu/tegra114-common/pinmux.c
+++ b/arch/arm/cpu/tegra114-common/pinmux.c
@@ -37,6 +37,20 @@ struct tegra_pingroup_desc {
 #define PMUX_OD_SHIFT		6
 #define PMUX_LOCK_SHIFT		7
 #define PMUX_IO_RESET_SHIFT	8
+#define PMUX_RCV_SEL_SHIFT	9
+
+#define PGRP_HSM_SHIFT		2
+#define PGRP_SCHMT_SHIFT	3
+#define PGRP_LPMD_SHIFT		4
+#define PGRP_LPMD_MASK		(3 << PGRP_LPMD_SHIFT)
+#define PGRP_DRVDN_SHIFT	12
+#define PGRP_DRVDN_MASK		(0x7F << PGRP_DRVDN_SHIFT)
+#define PGRP_DRVUP_SHIFT	20
+#define PGRP_DRVUP_MASK		(0x7F << PGRP_DRVUP_SHIFT)
+#define PGRP_SLWR_SHIFT		28
+#define PGRP_SLWR_MASK		(3 << PGRP_SLWR_SHIFT)
+#define PGRP_SLWF_SHIFT		30
+#define PGRP_SLWF_MASK		(3 << PGRP_SLWF_SHIFT)
 
 /* Convenient macro for defining pin group properties */
 #define PIN(pg_name, vdd, f0, f1, f2, f3, iod)	\
@@ -58,6 +72,10 @@ struct tegra_pingroup_desc {
 #define PINO(pg_name, vdd, f0, f1, f2, f3) \
 	PIN(pg_name, vdd, f0, f1, f2, f3, OUTPUT)
 
+/* A pin group number which is not used */
+#define PIN_RESERVED \
+	PIN(NONE, NONE, INVALID, INVALID, INVALID, INVALID, NONE)
+
 const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
 	/*	NAME	  VDD	   f0		f1	   f2	    f3  */
 	PINI(ULPI_DATA0,  BB,	   SPI3,       HSI,	   UARTA,   ULPI),
@@ -84,71 +102,71 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
 	PINI(SDMMC1_DAT2, SDMMC1,  SDMMC1,     PWM0,       SPI4,    UARTA),
 	PINI(SDMMC1_DAT1, SDMMC1,  SDMMC1,     PWM1,       SPI4,    UARTA),
 	PINI(SDMMC1_DAT0, SDMMC1,  SDMMC1,     RSVD2,      SPI4,    UARTA),
-	PINI(GPIO_PV2,    BB,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(GPIO_PV3,    BB,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PIN_RESERVED,	/* Reserved by t114: 0x3060 - 0x3064 */
+	PIN_RESERVED,
 	PINI(CLK2_OUT,    SDMMC1,  EXTPERIPH2, RSVD2,      RSVD3,   RSVD4),
 	PINI(CLK2_REQ,    SDMMC1,  DAP,        RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_PWR1,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_PWR2,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_SDIN,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_SDOUT,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_WR_N,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_CS0_N,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_DC0,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_SCK,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_PWR0,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_PCLK,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_DE,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_HSYNC,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_VSYNC,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D0,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D1,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D2,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D3,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D4,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D5,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D6,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D7,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D8,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D9,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D10,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D11,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D12,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D13,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D14,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D15,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D16,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D17,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D18,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D19,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D20,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D21,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D22,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_D23,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_CS1_N,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_M1,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINO(LCD_DC1,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PIN_RESERVED,	/* Reserved by t114: 0x3070 - 0x310c */
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
 	PINI(HDMI_INT,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
 	PINI(DDC_SCL,     LCD,     I2C4,       RSVD2,      RSVD3,   RSVD4),
 	PINI(DDC_SDA,     LCD,     I2C4,       RSVD2,      RSVD3,   RSVD4),
-	PINI(CRT_HSYNC,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(CRT_VSYNC,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D0,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D1,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D2,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D3,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D4,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D5,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D6,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D7,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D8,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D9,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D10,      VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_D11,      VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_PCLK,     VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_MCLK,     VI,      RSVD1,      RSVD3,      RSVD3,   RSVD4),
-	PINI(VI_VSYNC,    VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(VI_HSYNC,    VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PIN_RESERVED,	/* Reserved by t114: 0x311c - 0x3160 */
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
 	PINI(UART2_RXD,   UART,    UARTB,      SPDIF,      UARTA,   SPI4),
 	PINI(UART2_TXD,   UART,    UARTB,      SPDIF,      UARTA,   SPI4),
 	PINI(UART2_RTS_N, UART,    UARTA,      UARTB,      RSVD3,   SPI4),
@@ -220,8 +238,8 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
 	PINI(SDMMC4_DAT5, SDMMC4,  SDMMC4,     SPI3,       GMI,     RSVD4),
 	PINI(SDMMC4_DAT6, SDMMC4,  SDMMC4,     SPI3,       GMI,     RSVD4),
 	PINI(SDMMC4_DAT7, SDMMC4,  SDMMC4,     RSVD2,      GMI,     RSVD4),
-	PINI(SDMMC4_RST_N, SDMMC4, RSVD1,      RSVD2,      RSVD3,   SDMMC4),
-	PINI(CAM_MCLK,    CAM,     VI,         VI_ALT1,    VI_ALT2, RSVD4),
+	PIN_RESERVED,	/* Reserved by t114: 0x3280 */
+	PINI(CAM_MCLK,    CAM,     VI,         VI_ALT1,    VI_ALT3, RSVD4),
 	PINI(GPIO_PCC1,   CAM,     I2S4,       RSVD2,      RSVD3,   RSVD4),
 	PINI(GPIO_PBB0,   CAM,     I2S4,       VI,         VI_ALT1, VI_ALT3),
 	PINI(CAM_I2C_SCL, CAM,     VGP1,       I2C3,       RSVD3,   RSVD4),
@@ -246,11 +264,11 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
 	PINI(KB_ROW8,     SYS,     KBC,        RSVD2,      RSVD3,   UARTA),
 	PINI(KB_ROW9,     SYS,     KBC,        RSVD2,      RSVD3,   UARTA),
 	PINI(KB_ROW10,    SYS,     KBC,        RSVD2,      RSVD3,   UARTA),
-	PINI(KB_ROW11,    SYS,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(KB_ROW12,    SYS,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(KB_ROW13,    SYS,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(KB_ROW14,    SYS,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(KB_ROW15,    SYS,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PIN_RESERVED,	/* Reserved by t114: 0x32e8 - 0x32f8 */
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
 	PINI(KB_COL0,     SYS,     KBC,        USB,        SPI2,    EMC_DLL),
 	PINI(KB_COL1,     SYS,     KBC,        RSVD2,      SPI2,    EMC_DLL),
 	PINI(KB_COL2,     SYS,     KBC,        RSVD2,      SPI2,    RSVD4),
@@ -278,36 +296,46 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
 	PINI(DAP2_DIN,    AUDIO,   I2S1,       HDA,        RSVD3,   RSVD4),
 	PINI(DAP2_DOUT,   AUDIO,   I2S1,       HDA,        RSVD3,   RSVD4),
 	PINI(DAP2_SCLK,   AUDIO,   I2S1,       HDA,        RSVD3,   RSVD4),
-	PINI(SPI2_MOSI,   AUDIO,   SPI6,       CLDVFS,     RSVD3,   RSVD4),
-	PINI(SPI2_MISO,   AUDIO,   SPI6,       RSVD2,      RSVD3,   RSVD4),
-	PINI(SPI2_CS0_N,  AUDIO,   SPI6,       SPI1,       RSVD3,   RSVD4),
-	PINI(SPI2_SCK,    AUDIO,   SPI6,       CLDVFS,     RSVD3,   RSVD4),
-	PINI(SPI1_MOSI,   AUDIO,   RSVD1,      SPI1,       SPI2,    DAP2),
-	PINI(SPI1_SCK,    AUDIO,   RSVD1,      SPI1,       SPI2,    RSVD4),
-	PINI(SPI1_CS0_N,  AUDIO,   SPI6,       SPI1,       SPI2,    RSVD4),
-	PINI(SPI1_MISO,   AUDIO,   RSVD1,      SPI1,       SPI2,    RSVD4),
-	PINI(SPI2_CS1_N,  AUDIO,   RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(SPI2_CS2_N,  AUDIO,   RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(DVFS_PWM,    AUDIO,   SPI6,       CLDVFS,     RSVD3,   RSVD4),
+	PINI(GPIO_X1_AUD, AUDIO,   SPI6,       RSVD2,      RSVD3,   RSVD4),
+	PINI(GPIO_X3_AUD, AUDIO,   SPI6,       SPI1,       RSVD3,   RSVD4),
+	PINI(DVFS_CLK,    AUDIO,   SPI6,       CLDVFS,     RSVD3,   RSVD4),
+	PINI(GPIO_X4_AUD, AUDIO,   RSVD1,      SPI1,       SPI2,    DAP2),
+	PINI(GPIO_X5_AUD, AUDIO,   RSVD1,      SPI1,       SPI2,    RSVD4),
+	PINI(GPIO_X6_AUD, AUDIO,   SPI6,       SPI1,       SPI2,    RSVD4),
+	PINI(GPIO_X7_AUD, AUDIO,   RSVD1,      SPI1,       SPI2,    RSVD4),
+	PIN_RESERVED,   /* Reserved by t114: 0x3388 - 0x338c */
+	PIN_RESERVED,
 	PINI(SDMMC3_CLK,  SDMMC3,  SDMMC3,     RSVD2,      RSVD3,   SPI3),
 	PINI(SDMMC3_CMD,  SDMMC3,  SDMMC3,     PWM3,       UARTA,   SPI3),
 	PINI(SDMMC3_DAT0, SDMMC3,  SDMMC3,     RSVD2,      RSVD3,   SPI3),
 	PINI(SDMMC3_DAT1, SDMMC3,  SDMMC3,     PWM2,       UARTA,   SPI3),
 	PINI(SDMMC3_DAT2, SDMMC3,  SDMMC3,     PWM1,       DISPA,   SPI3),
 	PINI(SDMMC3_DAT3, SDMMC3,  SDMMC3,     PWM0,       DISPB,   SPI3),
-	PINI(SDMMC3_DAT4, SDMMC3,  RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(SDMMC3_DAT5, SDMMC3,  RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(SDMMC3_DAT6, SDMMC3,  RSVD1,      RSVD2,      RSVD3,   RSVD4),
-	PINI(SDMMC3_DAT7, SDMMC3,  RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PIN_RESERVED,   /* Reserved by t114: 0x33a8 - 0x33dc */
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
+	PIN_RESERVED,
 	PINI(HDMI_CEC,    SYS,     CEC,        SDMMC3,     RSVD3,   SOC),
 	PINI(SDMMC1_WP_N, SDMMC1,  SDMMC1,     CLK12,      SPI4,    UARTA),
-	PINI(SDMMC3_CD_N, SDMMC3,  SDMMC3,     OWR,        RSVD3,   RSVD4),
-	PINI(SPI1_CS1_N,  AUDIO,   SPI6,       RSVD2,      SPI2,    I2C1),
-	PINI(SPI1_CS2_N,  AUDIO,   SPI6,       SPI1,       SPI2,    I2C1),
-	PINI(USB_VBUS_EN0, SYS,    USB,        RSVD2,      RSVD3,   RSVD4),
-	PINI(USB_VBUS_EN1, SYS,    USB,        RSVD2,      RSVD3,   RSVD4),
+	PINI(SDMMC3_CD_N, SYS,  SDMMC3,     OWR,        RSVD3,   RSVD4),
+	PINI(GPIO_W2_AUD, AUDIO,   SPI6,       RSVD2,      SPI2,    I2C1),
+	PINI(GPIO_W3_AUD, AUDIO,   SPI6,       SPI1,       SPI2,    I2C1),
+	PINI(USB_VBUS_EN0, LCD,    USB,        RSVD2,      RSVD3,   RSVD4),
+	PINI(USB_VBUS_EN1, LCD,    USB,        RSVD2,      RSVD3,   RSVD4),
 	PINI(SDMMC3_CLK_LB_IN,  SDMMC3, SDMMC3, RSVD2,     RSVD3,   RSVD4),
-	PINO(SDMMC3_CLK_LB_OUT, SDMMC3, SDMMC3, RSVD2,     RSVD3,   RSVD4),
-	PINO(NAND_GMI_CLK_LB,   GMI,    SDMMC2, NAND,      GMI,     RSVD4),
+	PINI(SDMMC3_CLK_LB_OUT, SDMMC3, SDMMC3, RSVD2,     RSVD3,   RSVD4),
+	PIN_RESERVED,	/* Reserved by t114: 0x3404 */
 	PINO(RESET_OUT_N, SYS,     RSVD1,      RSVD2,      RSVD3, RESET_OUT_N),
 };
 
@@ -484,6 +512,30 @@ static int pinmux_set_ioreset(enum pmux_pingrp pin,
 	return 0;
 }
 
+static int pinmux_set_rcv_sel(enum pmux_pingrp pin,
+				enum pmux_pin_rcv_sel rcv_sel)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pin_rcv_sel = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin and rcv_sel */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_rcv_sel_isvalid(rcv_sel));
+
+	if (rcv_sel == PMUX_PIN_RCV_SEL_DEFAULT)
+		return 0;
+
+	reg = readl(pin_rcv_sel);
+	reg &= ~(0x1 << PMUX_RCV_SEL_SHIFT);
+	if (rcv_sel == PMUX_PIN_RCV_SEL_HIGH)
+		reg |= (0x1 << PMUX_RCV_SEL_SHIFT);
+	writel(reg, pin_rcv_sel);
+
+	return 0;
+}
+
 void pinmux_config_pingroup(struct pingroup_config *config)
 {
 	enum pmux_pingrp pin = config->pingroup;
@@ -495,6 +547,7 @@ void pinmux_config_pingroup(struct pingroup_config *config)
 	pinmux_set_lock(pin, config->lock);
 	pinmux_set_od(pin, config->od);
 	pinmux_set_ioreset(pin, config->ioreset);
+	pinmux_set_rcv_sel(pin, config->rcv_sel);
 }
 
 void pinmux_config_table(struct pingroup_config *config, int len)
@@ -504,3 +557,184 @@ void pinmux_config_table(struct pingroup_config *config, int len)
 	for (i = 0; i < len; i++)
 		pinmux_config_pingroup(&config[i]);
 }
+
+static int padgrp_set_drvup_slwf(enum pdrive_pingrp pad, int slwf)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_slwf = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and slwf */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_slw_isvalid(slwf));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (slwf == PGRP_SLWF_NONE)
+		return 0;
+
+	reg = readl(pad_slwf);
+	reg &= ~PGRP_SLWF_MASK;
+	reg |= (slwf << PGRP_SLWF_SHIFT);
+	writel(reg, pad_slwf);
+
+	return 0;
+}
+
+static int padgrp_set_drvdn_slwr(enum pdrive_pingrp pad, int slwr)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_slwr = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and slwr */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_slw_isvalid(slwr));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (slwr == PGRP_SLWR_NONE)
+		return 0;
+
+	reg = readl(pad_slwr);
+	reg &= ~PGRP_SLWR_MASK;
+	reg |= (slwr << PGRP_SLWR_SHIFT);
+	writel(reg, pad_slwr);
+
+	return 0;
+}
+
+static int padgrp_set_drvup(enum pdrive_pingrp pad, int drvup)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_drvup = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and drvup */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_drv_isvalid(drvup));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (drvup == PGRP_DRVUP_NONE)
+		return 0;
+
+	reg = readl(pad_drvup);
+	reg &= ~PGRP_DRVUP_MASK;
+	reg |= (drvup << PGRP_DRVUP_SHIFT);
+	writel(reg, pad_drvup);
+
+	return 0;
+}
+
+static int padgrp_set_drvdn(enum pdrive_pingrp pad, int drvdn)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_drvdn = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and drvdn */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_drv_isvalid(drvdn));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (drvdn == PGRP_DRVDN_NONE)
+		return 0;
+
+	reg = readl(pad_drvdn);
+	reg &= ~PGRP_DRVDN_MASK;
+	reg |= (drvdn << PGRP_DRVDN_SHIFT);
+	writel(reg, pad_drvdn);
+
+	return 0;
+}
+
+static int padgrp_set_lpmd(enum pdrive_pingrp pad, enum pgrp_lpmd lpmd)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_lpmd = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check pad and lpmd value */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_lpmd_isvalid(lpmd));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (lpmd == PGRP_LPMD_NONE)
+		return 0;
+
+	reg = readl(pad_lpmd);
+	reg &= ~PGRP_LPMD_MASK;
+	reg |= (lpmd << PGRP_LPMD_SHIFT);
+	writel(reg, pad_lpmd);
+
+	return 0;
+}
+
+static int padgrp_set_schmt(enum pdrive_pingrp pad, enum pgrp_schmt schmt)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_schmt = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check pad */
+	assert(pmux_padgrp_isvalid(pad));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (schmt == PGRP_SCHMT_NONE)
+		return 0;
+
+	reg = readl(pad_schmt);
+	reg &= ~(1 << PGRP_SCHMT_SHIFT);
+	if (schmt == PGRP_SCHMT_ENABLE)
+		reg |= (0x1 << PGRP_SCHMT_SHIFT);
+	writel(reg, pad_schmt);
+
+	return 0;
+}
+static int padgrp_set_hsm(enum pdrive_pingrp pad, enum pgrp_hsm hsm)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_hsm = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check pad */
+	assert(pmux_padgrp_isvalid(pad));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (hsm == PGRP_HSM_NONE)
+		return 0;
+
+	reg = readl(pad_hsm);
+	reg &= ~(1 << PGRP_HSM_SHIFT);
+	if (hsm == PGRP_HSM_ENABLE)
+		reg |= (0x1 << PGRP_HSM_SHIFT);
+	writel(reg, pad_hsm);
+
+	return 0;
+}
+
+void padctrl_config_pingroup(struct padctrl_config *config)
+{
+	enum pdrive_pingrp pad = config->padgrp;
+
+	padgrp_set_drvup_slwf(pad, config->slwf);
+	padgrp_set_drvdn_slwr(pad, config->slwr);
+	padgrp_set_drvup(pad, config->drvup);
+	padgrp_set_drvdn(pad, config->drvdn);
+	padgrp_set_lpmd(pad, config->lpmd);
+	padgrp_set_schmt(pad, config->schmt);
+	padgrp_set_hsm(pad, config->hsm);
+}
+
+void padgrp_config_table(struct padctrl_config *config, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		padctrl_config_pingroup(&config[i]);
+}
diff --git a/arch/arm/cpu/tegra30-common/pinmux.c b/arch/arm/cpu/tegra30-common/pinmux.c
index 122665fd3c6..eecf0580bc9 100644
--- a/arch/arm/cpu/tegra30-common/pinmux.c
+++ b/arch/arm/cpu/tegra30-common/pinmux.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -38,6 +38,19 @@ struct tegra_pingroup_desc {
 #define PMUX_LOCK_SHIFT		7
 #define PMUX_IO_RESET_SHIFT	8
 
+#define PGRP_HSM_SHIFT		2
+#define PGRP_SCHMT_SHIFT	3
+#define PGRP_LPMD_SHIFT		4
+#define PGRP_LPMD_MASK		(3 << PGRP_LPMD_SHIFT)
+#define PGRP_DRVDN_SHIFT	12
+#define PGRP_DRVDN_MASK		(0x7F << PGRP_DRVDN_SHIFT)
+#define PGRP_DRVUP_SHIFT	20
+#define PGRP_DRVUP_MASK		(0x7F << PGRP_DRVUP_SHIFT)
+#define PGRP_SLWR_SHIFT		28
+#define PGRP_SLWR_MASK		(3 << PGRP_SLWR_SHIFT)
+#define PGRP_SLWF_SHIFT		30
+#define PGRP_SLWF_MASK		(3 << PGRP_SLWF_SHIFT)
+
 /* Convenient macro for defining pin group properties */
 #define PIN(pg_name, vdd, f0, f1, f2, f3, iod)	\
 	{						\
@@ -504,3 +517,178 @@ void pinmux_config_table(struct pingroup_config *config, int len)
 	for (i = 0; i < len; i++)
 		pinmux_config_pingroup(&config[i]);
 }
+
+static int padgrp_set_drvup_slwf(enum pdrive_pingrp pad,
+				int slwf)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_slwf = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and slwf */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_slw_isvalid(slwf));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (slwf == PGRP_SLWF_NONE)
+		return 0;
+
+	reg = readl(pad_slwf);
+	reg &= ~PGRP_SLWF_MASK;
+	reg |= (slwf << PGRP_SLWF_SHIFT);
+	writel(reg, pad_slwf);
+
+	return 0;
+}
+
+static int padgrp_set_drvdn_slwr(enum pdrive_pingrp pad, int slwr)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_slwr = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and slwr */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_slw_isvalid(slwr));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (slwr == PGRP_SLWR_NONE)
+		return 0;
+
+	reg = readl(pad_slwr);
+	reg &= ~PGRP_SLWR_MASK;
+	reg |= (slwr << PGRP_SLWR_SHIFT);
+	writel(reg, pad_slwr);
+
+	return 0;
+}
+
+static int padgrp_set_drvup(enum pdrive_pingrp pad, int drvup)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_drvup = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and drvup */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_drv_isvalid(drvup));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (drvup == PGRP_DRVUP_NONE)
+		return 0;
+
+	reg = readl(pad_drvup);
+	reg &= ~PGRP_DRVUP_MASK;
+	reg |= (drvup << PGRP_DRVUP_SHIFT);
+	writel(reg, pad_drvup);
+
+	return 0;
+}
+
+static int padgrp_set_drvdn(enum pdrive_pingrp pad, int drvdn)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_drvdn = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check on pad and drvdn */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_drv_isvalid(drvdn));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (drvdn == PGRP_DRVDN_NONE)
+		return 0;
+
+	reg = readl(pad_drvdn);
+	reg &= ~PGRP_DRVDN_MASK;
+	reg |= (drvdn << PGRP_DRVDN_SHIFT);
+	writel(reg, pad_drvdn);
+
+	return 0;
+}
+
+static int padgrp_set_lpmd(enum pdrive_pingrp pad, enum pgrp_lpmd lpmd)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_lpmd = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check pad and lpmd value */
+	assert(pmux_padgrp_isvalid(pad));
+	assert(pmux_pad_lpmd_isvalid(lpmd));
+
+	/* NONE means unspecified/do not change/use POR value */
+	if (lpmd == PGRP_LPMD_NONE)
+		return 0;
+
+	reg = readl(pad_lpmd);
+	reg &= ~PGRP_LPMD_MASK;
+	reg |= (lpmd << PGRP_LPMD_SHIFT);
+	writel(reg, pad_lpmd);
+
+	return 0;
+}
+
+static int padgrp_set_schmt(enum pdrive_pingrp pad, enum pgrp_schmt schmt)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_schmt = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check pad */
+	assert(pmux_padgrp_isvalid(pad));
+
+	reg = readl(pad_schmt);
+	reg &= ~(1 << PGRP_SCHMT_SHIFT);
+	if (schmt == PGRP_SCHMT_ENABLE)
+		reg |= (0x1 << PGRP_SCHMT_SHIFT);
+	writel(reg, pad_schmt);
+
+	return 0;
+}
+static int padgrp_set_hsm(enum pdrive_pingrp pad,
+			enum pgrp_hsm hsm)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pad_hsm = &pmt->pmt_drive[pad];
+	u32 reg;
+
+	/* Error check pad */
+	assert(pmux_padgrp_isvalid(pad));
+
+	reg = readl(pad_hsm);
+	reg &= ~(1 << PGRP_HSM_SHIFT);
+	if (hsm == PGRP_HSM_ENABLE)
+		reg |= (0x1 << PGRP_HSM_SHIFT);
+	writel(reg, pad_hsm);
+
+	return 0;
+}
+
+void padctrl_config_pingroup(struct padctrl_config *config)
+{
+	enum pdrive_pingrp pad = config->padgrp;
+
+	padgrp_set_drvup_slwf(pad, config->slwf);
+	padgrp_set_drvdn_slwr(pad, config->slwr);
+	padgrp_set_drvup(pad, config->drvup);
+	padgrp_set_drvdn(pad, config->drvdn);
+	padgrp_set_lpmd(pad, config->lpmd);
+	padgrp_set_schmt(pad, config->schmt);
+	padgrp_set_hsm(pad, config->hsm);
+}
+
+void padgrp_config_table(struct padctrl_config *config, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		padctrl_config_pingroup(&config[i]);
+}
diff --git a/arch/arm/dts/tegra114.dtsi b/arch/arm/dts/tegra114.dtsi
index d06cd126dd8..701c0f9aff6 100644
--- a/arch/arm/dts/tegra114.dtsi
+++ b/arch/arm/dts/tegra114.dtsi
@@ -1,5 +1,78 @@
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
 
 / {
 	compatible = "nvidia,tegra114";
+
+	tegra_car: clock {
+		compatible = "nvidia,tegra114-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	gpio: gpio {
+		compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <0 32 0x04
+			      0 33 0x04
+			      0 34 0x04
+			      0 35 0x04
+			      0 55 0x04
+			      0 87 0x04
+			      0 89 0x04
+			      0 125 0x04>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <0 38 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 12>;
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c400 0x100>;
+		interrupts = <0 84 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 54>;
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c500 0x100>;
+		interrupts = <0 92 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 67>;
+		status = "disabled";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c700 0x100>;
+		interrupts = <0 120 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 103>;
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000d000 0x100>;
+		interrupts = <0 53 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 47>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
index 9a8968522e4..3805750581f 100644
--- a/arch/arm/dts/tegra20.dtsi
+++ b/arch/arm/dts/tegra20.dtsi
@@ -1,4 +1,4 @@
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
 
 / {
 	compatible = "nvidia,tegra20";
@@ -318,24 +318,32 @@
 	sdhci@c8000000 {
 		compatible = "nvidia,tegra20-sdhci";
 		reg = <0xc8000000 0x200>;
-		interrupts = < 46 >;
+		interrupts = <0 14 0x04>;
+		clocks = <&tegra_car 14>;
+		status = "disabled";
 	};
 
 	sdhci@c8000200 {
 		compatible = "nvidia,tegra20-sdhci";
 		reg = <0xc8000200 0x200>;
-		interrupts = < 47 >;
+		interrupts = <0 15 0x04>;
+		clocks = <&tegra_car 9>;
+		status = "disabled";
 	};
 
 	sdhci@c8000400 {
 		compatible = "nvidia,tegra20-sdhci";
 		reg = <0xc8000400 0x200>;
-		interrupts = < 51 >;
+		interrupts = <0 19 0x04>;
+		clocks = <&tegra_car 69>;
+		status = "disabled";
 	};
 
 	sdhci@c8000600 {
 		compatible = "nvidia,tegra20-sdhci";
 		reg = <0xc8000600 0x200>;
-		interrupts = < 63 >;
+		interrupts = <0 31 0x04>;
+		clocks = <&tegra_car 15>;
+		status = "disabled";
 	};
 };
diff --git a/arch/arm/dts/tegra30.dtsi b/arch/arm/dts/tegra30.dtsi
index 7b8126f7ccd..ccf154f1e76 100644
--- a/arch/arm/dts/tegra30.dtsi
+++ b/arch/arm/dts/tegra30.dtsi
@@ -1,10 +1,10 @@
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
 
 / {
 	compatible = "nvidia,tegra30";
 
-	tegra_car: clock@60006000 {
-		compatible = "nvidia,tegra30-car", "nvidia,tegra20-car";
+	tegra_car: clock {
+		compatible = "nvidia,tegra30-car";
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
 	};
@@ -44,51 +44,79 @@
 			      0 141 0x04
 			      0 142 0x04
 			      0 143 0x04>;
+		clocks = <&tegra_car 34>;
+	};
+
+	gpio: gpio {
+		compatible = "nvidia,tegra30-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <0 32 0x04
+			      0 33 0x04
+			      0 34 0x04
+			      0 35 0x04
+			      0 55 0x04
+			      0 87 0x04
+			      0 89 0x04
+			      0 125 0x04>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
 	};
 
 	i2c@7000c000 {
+		compatible =  "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <0 38 0x04>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000C000 0x100>;
-		/* PERIPH_ID_I2C1, CLK_M */
-		clocks = <&tegra_car 12>;
+		clocks = <&tegra_car 12>, <&tegra_car 182>;
+		clock-names = "div-clk", "fast-clk";
+		status = "disabled";
 	};
 
 	i2c@7000c400 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c400 0x100>;
+		interrupts = <0 84 0x04>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000C400 0x100>;
-		/* PERIPH_ID_I2C2, CLK_M */
-		clocks = <&tegra_car 54>;
+		clocks = <&tegra_car 54>, <&tegra_car 182>;
+		clock-names = "div-clk", "fast-clk";
+		status = "disabled";
 	};
 
 	i2c@7000c500 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c500 0x100>;
+		interrupts = <0 92 0x04>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000C500 0x100>;
-		/* PERIPH_ID_I2C3, CLK_M */
-		clocks = <&tegra_car 67>;
+		clocks = <&tegra_car 67>, <&tegra_car 182>;
+		clock-names = "div-clk", "fast-clk";
+		status = "disabled";
 	};
 
 	i2c@7000c700 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c700 0x100>;
+		interrupts = <0 120 0x04>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000C700 0x100>;
-		/* PERIPH_ID_I2C4, CLK_M */
-		clocks = <&tegra_car 103>;
+		clocks = <&tegra_car 103>, <&tegra_car 182>;
+		clock-names = "div-clk", "fast-clk";
+		status = "disabled";
 	};
 
 	i2c@7000d000 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000d000 0x100>;
+		interrupts = <0 53 0x04>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000D000 0x100>;
-		/* PERIPH_ID_I2C_DVC, CLK_M */
-		clocks = <&tegra_car 47>;
+		clocks = <&tegra_car 47>, <&tegra_car 182>;
+		clock-names = "div-clk", "fast-clk";
+		status = "disabled";
 	};
 
 	spi@7000d400 {
@@ -98,9 +126,8 @@
 		nvidia,dma-request-selector = <&apbdma 15>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		status = "disabled";
-		/* PERIPH_ID_SBC1, PLLP_OUT0 */
 		clocks = <&tegra_car 41>;
+		status = "disabled";
 	};
 
 	spi@7000d600 {
@@ -110,9 +137,8 @@
 		nvidia,dma-request-selector = <&apbdma 16>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		status = "disabled";
-		/* PERIPH_ID_SBC2, PLLP_OUT0 */
 		clocks = <&tegra_car 44>;
+		status = "disabled";
 	};
 
 	spi@7000d800 {
@@ -122,9 +148,8 @@
 		nvidia,dma-request-selector = <&apbdma 17>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		status = "disabled";
-		/* PERIPH_ID_SBC3, PLLP_OUT0 */
 		clocks = <&tegra_car 46>;
+		status = "disabled";
 	};
 
 	spi@7000da00 {
@@ -134,9 +159,8 @@
 		nvidia,dma-request-selector = <&apbdma 18>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		status = "disabled";
-		/* PERIPH_ID_SBC4, PLLP_OUT0 */
 		clocks = <&tegra_car 68>;
+		status = "disabled";
 	};
 
 	spi@7000dc00 {
@@ -146,9 +170,8 @@
 		nvidia,dma-request-selector = <&apbdma 27>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		status = "disabled";
-		/* PERIPH_ID_SBC5, PLLP_OUT0 */
 		clocks = <&tegra_car 104>;
+		status = "disabled";
 	};
 
 	spi@7000de00 {
@@ -158,8 +181,39 @@
 		nvidia,dma-request-selector = <&apbdma 28>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		status = "disabled";
-		/* PERIPH_ID_SBC6, PLLP_OUT0 */
 		clocks = <&tegra_car 105>;
+		status = "disabled";
+	};
+
+	sdhci@78000000 {
+		compatible = "nvidia,tegra30-sdhci";
+		reg = <0x78000000 0x200>;
+		interrupts = <0 14 0x04>;
+		clocks = <&tegra_car 14>;
+		status = "disabled";
+	};
+
+	sdhci@78000200 {
+		compatible = "nvidia,tegra30-sdhci";
+		reg = <0x78000200 0x200>;
+		interrupts = <0 15 0x04>;
+		clocks = <&tegra_car 9>;
+		status = "disabled";
+	};
+
+	sdhci@78000400 {
+		compatible = "nvidia,tegra30-sdhci";
+		reg = <0x78000400 0x200>;
+		interrupts = <0 19 0x04>;
+		clocks = <&tegra_car 69>;
+		status = "disabled";
+	};
+
+	sdhci@78000600 {
+		compatible = "nvidia,tegra30-sdhci";
+		reg = <0x78000600 0x200>;
+		interrupts = <0 31 0x04>;
+		clocks = <&tegra_car 15>;
+		status = "disabled";
 	};
 };
diff --git a/arch/arm/include/asm/arch-tegra/mmc.h b/arch/arm/include/asm/arch-tegra/mmc.h
index 5c95047998c..71ad407511a 100644
--- a/arch/arm/include/asm/arch-tegra/mmc.h
+++ b/arch/arm/include/asm/arch-tegra/mmc.h
@@ -22,6 +22,6 @@
 #ifndef _TEGRA_MMC_H_
 #define _TEGRA_MMC_H_
 
-int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio);
+void tegra_mmc_init(void);
 
 #endif /* _TEGRA_MMC_H_ */
diff --git a/arch/arm/include/asm/arch-tegra/tegra_i2c.h b/arch/arm/include/asm/arch-tegra/tegra_i2c.h
index 26507447185..853e59bb6e6 100644
--- a/arch/arm/include/asm/arch-tegra/tegra_i2c.h
+++ b/arch/arm/include/asm/arch-tegra/tegra_i2c.h
@@ -105,6 +105,7 @@ struct i2c_ctlr {
 	u32 sl_delay_count;		/* 3C: I2C_I2C_SL_DELAY_COUNT */
 	u32 reserved_2[4];		/* 40: */
 	struct i2c_control control;	/* 50 ~ 68 */
+	u32 clk_div;			/* 6C: I2C_I2C_CLOCK_DIVISOR */
 };
 
 /* bit fields definitions for IO Packet Header 1 format */
@@ -154,6 +155,11 @@ struct i2c_ctlr {
 #define I2C_INT_ARBITRATION_LOST_SHIFT	2
 #define I2C_INT_ARBITRATION_LOST_MASK	(1 << I2C_INT_ARBITRATION_LOST_SHIFT)
 
+/* I2C_CLK_DIVISOR_REGISTER */
+#define CLK_DIV_STD_FAST_MODE		0x19
+#define CLK_DIV_HS_MODE			1
+#define CLK_MULT_STD_FAST_MODE		8
+
 /**
  * Returns the bus number of the DVC controller
  *
diff --git a/arch/arm/include/asm/arch-tegra/tegra_mmc.h b/arch/arm/include/asm/arch-tegra/tegra_mmc.h
index dd746cae0d0..2a3f830cc58 100644
--- a/arch/arm/include/asm/arch-tegra/tegra_mmc.h
+++ b/arch/arm/include/asm/arch-tegra/tegra_mmc.h
@@ -22,10 +22,9 @@
 #ifndef __TEGRA_MMC_H_
 #define __TEGRA_MMC_H_
 
-#define TEGRA_SDMMC1_BASE	0xC8000000
-#define TEGRA_SDMMC2_BASE	0xC8000200
-#define TEGRA_SDMMC3_BASE	0xC8000400
-#define TEGRA_SDMMC4_BASE	0xC8000600
+#include <fdtdec.h>
+
+#define MAX_HOSTS		4	/* Max number of 'hosts'/controllers */
 
 #ifndef __ASSEMBLY__
 struct tegra_mmc {
@@ -62,12 +61,30 @@ struct tegra_mmc {
 	unsigned char	admaerr;	/* offset 54h */
 	unsigned char	res4[3];	/* RESERVED, offset 55h-57h */
 	unsigned long	admaaddr;	/* offset 58h-5Fh */
-	unsigned char	res5[0x9c];	/* RESERVED, offset 60h-FBh */
+	unsigned char	res5[0xa0];	/* RESERVED, offset 60h-FBh */
 	unsigned short	slotintstatus;	/* offset FCh */
 	unsigned short	hcver;		/* HOST Version */
-	unsigned char	res6[0x100];	/* RESERVED, offset 100h-1FFh */
+	unsigned int	venclkctl;	/* _VENDOR_CLOCK_CNTRL_0,    100h */
+	unsigned int	venspictl;	/* _VENDOR_SPI_CNTRL_0,      104h */
+	unsigned int	venspiintsts;	/* _VENDOR_SPI_INT_STATUS_0, 108h */
+	unsigned int	venceatactl;	/* _VENDOR_CEATA_CNTRL_0,    10Ch */
+	unsigned int	venbootctl;	/* _VENDOR_BOOT_CNTRL_0,     110h */
+	unsigned int	venbootacktout;	/* _VENDOR_BOOT_ACK_TIMEOUT, 114h */
+	unsigned int	venbootdattout;	/* _VENDOR_BOOT_DAT_TIMEOUT, 118h */
+	unsigned int	vendebouncecnt;	/* _VENDOR_DEBOUNCE_COUNT_0, 11Ch */
+	unsigned int	venmiscctl;	/* _VENDOR_MISC_CNTRL_0,     120h */
+	unsigned int	res6[47];	/* 0x124 ~ 0x1DC */
+	unsigned int	sdmemcmppadctl;	/* _SDMEMCOMPPADCTRL_0,      1E0h */
+	unsigned int	autocalcfg;	/* _AUTO_CAL_CONFIG_0,       1E4h */
+	unsigned int	autocalintval;	/* _AUTO_CAL_INTERVAL_0,     1E8h */
+	unsigned int	autocalsts;	/* _AUTO_CAL_STATUS_0,       1ECh */
 };
 
+#define TEGRA_MMC_PWRCTL_SD_BUS_POWER				(1 << 0)
+#define TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V1_8			(5 << 1)
+#define TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_0			(6 << 1)
+#define TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_3			(7 << 1)
+
 #define TEGRA_MMC_HOSTCTL_DMASEL_MASK				(3 << 3)
 #define TEGRA_MMC_HOSTCTL_DMASEL_SDMA				(0 << 3)
 #define TEGRA_MMC_HOSTCTL_DMASEL_ADMA2_32BIT			(2 << 3)
@@ -117,15 +134,26 @@ struct tegra_mmc {
 
 #define TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE			(1 << 1)
 
+/* SDMMC1/3 settings from section 24.6 of T30 TRM */
+#define MEMCOMP_PADCTRL_VREF	7
+#define AUTO_CAL_ENABLED	(1 << 29)
+#define AUTO_CAL_PD_OFFSET	(0x70 << 8)
+#define AUTO_CAL_PU_OFFSET	(0x62 << 0)
+
 struct mmc_host {
 	struct tegra_mmc *reg;
+	int id;			/* device id/number, 0-3 */
+	int enabled;		/* 1 to enable, 0 to disable */
+	int width;		/* Bus Width, 1, 4 or 8 */
+	enum periph_id mmc_id;	/* Peripheral ID: PERIPH_ID_... */
+	struct fdt_gpio_state cd_gpio;		/* Change Detect GPIO */
+	struct fdt_gpio_state pwr_gpio;		/* Power GPIO */
+	struct fdt_gpio_state wp_gpio;		/* Write Protect GPIO */
 	unsigned int version;	/* SDHCI spec. version */
 	unsigned int clock;	/* Current clock (MHz) */
-	unsigned int base;	/* Base address, SDMMC1/2/3/4 */
-	enum periph_id mmc_id;	/* Peripheral ID: PERIPH_ID_... */
-	int pwr_gpio;		/* Power GPIO */
-	int cd_gpio;		/* Change Detect GPIO */
 };
 
+void pad_init_mmc(struct mmc_host *host);
+
 #endif	/* __ASSEMBLY__ */
 #endif	/* __TEGRA_MMC_H_ */
diff --git a/arch/arm/include/asm/arch-tegra20/usb.h b/arch/arm/include/asm/arch-tegra/usb.h
index fdbd127e6c0..ef6c089be26 100644
--- a/arch/arm/include/asm/arch-tegra20/usb.h
+++ b/arch/arm/include/asm/arch-tegra/usb.h
@@ -243,29 +243,7 @@ struct usb_ctlr {
 #define VBUS_VLD_STS			(1 << 26)
 
 
-/* Change the USB host port into host mode */
-void usb_set_host_mode(void);
-
 /* Setup USB on the board */
 int board_usb_init(const void *blob);
 
-/**
- * Start up the given port number (ports are numbered from 0 on each board).
- * This returns values for the appropriate hccr and hcor addresses to use for
- * USB EHCI operations.
- *
- * @param portnum	port number to start
- * @param hccr		returns start address of EHCI HCCR registers
- * @param hcor		returns start address of EHCI HCOR registers
- * @return 0 if ok, -1 on error (generally invalid port number)
- */
-int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor);
-
-/**
- * Stop the current port
- *
- * @return 0 if ok, -1 if no port was active
- */
-int tegrausb_stop_port(int portnum);
-
 #endif	/* _TEGRA_USB_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/gp_padctrl.h b/arch/arm/include/asm/arch-tegra114/gp_padctrl.h
index c538bdd0522..1ef1a1484df 100644
--- a/arch/arm/include/asm/arch-tegra114/gp_padctrl.h
+++ b/arch/arm/include/asm/arch-tegra114/gp_padctrl.h
@@ -27,7 +27,7 @@ struct apb_misc_gp_ctlr {
 	u32	emu_revid;	/* 0x60: APB_MISC_GP_EMU_REVID */
 	u32	xactor_scratch;	/* 0x64: APB_MISC_GP_XACTOR_SCRATCH */
 	u32	aocfg1;		/* 0x68: APB_MISC_GP_AOCFG1PADCTRL */
-	u32	aocfg2;		/* 0x6c: APB_MISC_GP_AOCFG2PADCTRL */
+	u32	aocfg2;		/* 0x6C: APB_MISC_GP_AOCFG2PADCTRL */
 	u32	atcfg1;		/* 0x70: APB_MISC_GP_ATCFG1PADCTRL */
 	u32	atcfg2;		/* 0x74: APB_MISC_GP_ATCFG2PADCTRL */
 	u32	atcfg3;		/* 0x78: APB_MISC_GP_ATCFG3PADCTRL */
@@ -35,25 +35,43 @@ struct apb_misc_gp_ctlr {
 	u32	atcfg5;		/* 0x80: APB_MISC_GP_ATCFG5PADCTRL */
 	u32	cdev1cfg;	/* 0x84: APB_MISC_GP_CDEV1CFGPADCTRL */
 	u32	cdev2cfg;	/* 0x88: APB_MISC_GP_CDEV2CFGPADCTRL */
-	u32	csuscfg;	/* 0x8C: APB_MISC_GP_CSUSCFGPADCTRL */
+	u32	reserved1;	/* 0x8C: */
 	u32	dap1cfg;	/* 0x90: APB_MISC_GP_DAP1CFGPADCTRL */
 	u32	dap2cfg;	/* 0x94: APB_MISC_GP_DAP2CFGPADCTRL */
 	u32	dap3cfg;	/* 0x98: APB_MISC_GP_DAP3CFGPADCTRL */
 	u32	dap4cfg;	/* 0x9C: APB_MISC_GP_DAP4CFGPADCTRL */
 	u32	dbgcfg;		/* 0xA0: APB_MISC_GP_DBGCFGPADCTRL */
-	u32	lcdcfg1;	/* 0xA4: APB_MISC_GP_LCDCFG1PADCTRL */
-	u32	lcdcfg2;	/* 0xA8: APB_MISC_GP_LCDCFG2PADCTRL */
-	u32	sdio2cfg;	/* 0xAC: APB_MISC_GP_SDIO2CFGPADCTRL */
+	u32	reserved2[3];	/* 0xA4 - 0xAC: */
 	u32	sdio3cfg;	/* 0xB0: APB_MISC_GP_SDIO3CFGPADCTRL */
 	u32	spicfg;		/* 0xB4: APB_MISC_GP_SPICFGPADCTRL */
 	u32	uaacfg;		/* 0xB8: APB_MISC_GP_UAACFGPADCTRL */
 	u32	uabcfg;		/* 0xBC: APB_MISC_GP_UABCFGPADCTRL */
 	u32	uart2cfg;	/* 0xC0: APB_MISC_GP_UART2CFGPADCTRL */
 	u32	uart3cfg;	/* 0xC4: APB_MISC_GP_UART3CFGPADCTRL */
-	u32	vicfg1;		/* 0xC8: APB_MISC_GP_VICFG1PADCTRL */
-	u32	vivttgen;	/* 0xCC: APB_MISC_GP_VIVTTGENPADCTRL */
-	u32	reserved1[7];	/* 0xD0-0xE8: */
+	u32	reserved3[9];	/* 0xC8-0xE8: */
 	u32	sdio1cfg;	/* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */
+	u32	reserved4[3];	/* 0xF0-0xF8: */
+	u32	ddccfg;		/* 0xFC: APB_MISC_GP_DDCCFGPADCTRL */
+	u32	gmacfg;		/* 0x100: APB_MISC_GP_GMACFGPADCTRL */
+	u32	reserved5[3];	/* 0x104-0x10C: */
+	u32	gmecfg;		/* 0x110: APB_MISC_GP_GMECFGPADCTRL */
+	u32	gmfcfg;		/* 0x114: APB_MISC_GP_GMFCFGPADCTRL */
+	u32	gmgcfg;		/* 0x118: APB_MISC_GP_GMGCFGPADCTRL */
+	u32	gmhcfg;		/* 0x11C: APB_MISC_GP_GMHCFGPADCTRL */
+	u32	owrcfg;		/* 0x120: APB_MISC_GP_OWRCFGPADCTRL */
+	u32	uadcfg;		/* 0x124: APB_MISC_GP_UADCFGPADCTRL */
+	u32	reserved6;	/* 0x128: */
+	u32	dev3cfg;	/* 0x12C: APB_MISC_GP_DEV3CFGPADCTRL */
+	u32	reserved7[2];	/* 0x130 - 0x134: */
+	u32	ceccfg;		/* 0x138: APB_MISC_GP_CECCFGPADCTRL */
+	u32	reserved8[22];	/* 0x13C - 0x190: */
+	u32	atcfg6;		/* 0x194: APB_MISC_GP_ATCFG6PADCTRL */
+	u32	dap5cfg;	/* 0x198: APB_MISC_GP_DAP5CFGPADCTRL */
+	u32	vbuscfg;	/* 0x19C: APB_MISC_GP_USBVBUSENCFGPADCTRL */
+	u32	aocfg3;		/* 0x1A0: APB_MISC_GP_AOCFG3PADCTRL */
+	u32	hvccfg0;	/* 0x1A4: APB_MISC_GP_HVCCFG0PADCTRL */
+	u32	sdio4cfg;	/* 0x1A8: APB_MISC_GP_SDIO4CFGPADCTRL */
+	u32	aocfg0;		/* 0x1AC: APB_MISC_GP_AOCFG0PADCTRL */
 };
 
 #endif	/* _TEGRA114_GP_PADCTRL_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/pinmux.h b/arch/arm/include/asm/arch-tegra114/pinmux.h
index fd2293039d0..9c22c08b6e3 100644
--- a/arch/arm/include/asm/arch-tegra114/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra114/pinmux.h
@@ -50,72 +50,12 @@ enum pmux_pingrp {
 	PINGRP_SDMMC1_DAT2,
 	PINGRP_SDMMC1_DAT1,
 	PINGRP_SDMMC1_DAT0,
-	PINGRP_GPIO_PV2,
-	PINGRP_GPIO_PV3,
-	PINGRP_CLK2_OUT,
+	PINGRP_CLK2_OUT = PINGRP_SDMMC1_DAT0 + 3,
 	PINGRP_CLK2_REQ,
-	PINGRP_LCD_PWR1,
-	PINGRP_LCD_PWR2,
-	PINGRP_LCD_SDIN,
-	PINGRP_LCD_SDOUT,
-	PINGRP_LCD_WR_N,
-	PINGRP_LCD_CS0_N,
-	PINGRP_LCD_DC0,
-	PINGRP_LCD_SCK,
-	PINGRP_LCD_PWR0,
-	PINGRP_LCD_PCLK,
-	PINGRP_LCD_DE,
-	PINGRP_LCD_HSYNC,
-	PINGRP_LCD_VSYNC,
-	PINGRP_LCD_D0,
-	PINGRP_LCD_D1,
-	PINGRP_LCD_D2,
-	PINGRP_LCD_D3,
-	PINGRP_LCD_D4,
-	PINGRP_LCD_D5,
-	PINGRP_LCD_D6,
-	PINGRP_LCD_D7,
-	PINGRP_LCD_D8,
-	PINGRP_LCD_D9,
-	PINGRP_LCD_D10,
-	PINGRP_LCD_D11,
-	PINGRP_LCD_D12,
-	PINGRP_LCD_D13,
-	PINGRP_LCD_D14,
-	PINGRP_LCD_D15,
-	PINGRP_LCD_D16,
-	PINGRP_LCD_D17,
-	PINGRP_LCD_D18,
-	PINGRP_LCD_D19,
-	PINGRP_LCD_D20,
-	PINGRP_LCD_D21,
-	PINGRP_LCD_D22,
-	PINGRP_LCD_D23,
-	PINGRP_LCD_CS1_N,
-	PINGRP_LCD_M1,
-	PINGRP_LCD_DC1,
-	PINGRP_HDMI_INT,
+	PINGRP_HDMI_INT = PINGRP_CLK2_REQ + 41,
 	PINGRP_DDC_SCL,
 	PINGRP_DDC_SDA,
-	PINGRP_CRT_HSYNC,
-	PINGRP_CRT_VSYNC,
-	PINGRP_VI_D0,
-	PINGRP_VI_D1,
-	PINGRP_VI_D2,
-	PINGRP_VI_D3,
-	PINGRP_VI_D4,
-	PINGRP_VI_D5,
-	PINGRP_VI_D6,
-	PINGRP_VI_D7,
-	PINGRP_VI_D8,
-	PINGRP_VI_D9,
-	PINGRP_VI_D10,
-	PINGRP_VI_D11,
-	PINGRP_VI_PCLK,
-	PINGRP_VI_MCLK,
-	PINGRP_VI_VSYNC,
-	PINGRP_VI_HSYNC,
-	PINGRP_UART2_RXD,
+	PINGRP_UART2_RXD = PINGRP_DDC_SDA + 19,
 	PINGRP_UART2_TXD,
 	PINGRP_UART2_RTS_N,
 	PINGRP_UART2_CTS_N,
@@ -186,8 +126,7 @@ enum pmux_pingrp {
 	PINGRP_SDMMC4_DAT5,
 	PINGRP_SDMMC4_DAT6,
 	PINGRP_SDMMC4_DAT7,
-	PINGRP_SDMMC4_RST_N,
-	PINGRP_CAM_MCLK,
+	PINGRP_CAM_MCLK = PINGRP_SDMMC4_DAT7 + 2,
 	PINGRP_GPIO_PCC1,
 	PINGRP_GPIO_PBB0,
 	PINGRP_CAM_I2C_SCL,
@@ -212,12 +151,7 @@ enum pmux_pingrp {
 	PINGRP_KB_ROW8,
 	PINGRP_KB_ROW9,
 	PINGRP_KB_ROW10,
-	PINGRP_KB_ROW11,
-	PINGRP_KB_ROW12,
-	PINGRP_KB_ROW13,
-	PINGRP_KB_ROW14,
-	PINGRP_KB_ROW15,
-	PINGRP_KB_COL0,
+	PINGRP_KB_COL0 = PINGRP_KB_ROW10 + 6,
 	PINGRP_KB_COL1,
 	PINGRP_KB_COL2,
 	PINGRP_KB_COL3,
@@ -244,47 +178,30 @@ enum pmux_pingrp {
 	PINGRP_DAP2_DIN,
 	PINGRP_DAP2_DOUT,
 	PINGRP_DAP2_SCLK,
-	PINGRP_SPI2_MOSI,
-	PINGRP_SPI2_MISO,
-	PINGRP_SPI2_CS0_N,
-	PINGRP_SPI2_SCK,
-	PINGRP_SPI1_MOSI,
-	PINGRP_SPI1_SCK,
-	PINGRP_SPI1_CS0_N,
-	PINGRP_SPI1_MISO,
-	PINGRP_SPI2_CS1_N,
-	PINGRP_SPI2_CS2_N,
-	PINGRP_SDMMC3_CLK,
+	PINGRP_DVFS_PWM,
+	PINGRP_GPIO_X1_AUD,
+	PINGRP_GPIO_X3_AUD,
+	PINGRP_DVFS_CLK,
+	PINGRP_GPIO_X4_AUD,
+	PINGRP_GPIO_X5_AUD,
+	PINGRP_GPIO_X6_AUD,
+	PINGRP_GPIO_X7_AUD,
+	PINGRP_SDMMC3_CLK = PINGRP_GPIO_X7_AUD + 3,
 	PINGRP_SDMMC3_CMD,
 	PINGRP_SDMMC3_DAT0,
 	PINGRP_SDMMC3_DAT1,
 	PINGRP_SDMMC3_DAT2,
 	PINGRP_SDMMC3_DAT3,
-	PINGRP_SDMMC3_DAT4,
-	PINGRP_SDMMC3_DAT5,
-	PINGRP_SDMMC3_DAT6,
-	PINGRP_SDMMC3_DAT7,
-	PINGRP_PEX_L0_PRSNT_N,
-	PINGRP_PEX_L0_RST_N,
-	PINGRP_PEX_L0_CLKREQ_N,
-	PINGRP_PEX_WAKE_N,
-	PINGRP_PEX_L1_PRSNT_N,
-	PINGRP_PEX_L1_RST_N,
-	PINGRP_PEX_L1_CLKREQ_N,
-	PINGRP_PEX_L2_PRSNT_N,
-	PINGRP_PEX_L2_RST_N,
-	PINGRP_PEX_L2_CLKREQ_N,
-	PINGRP_HDMI_CEC,	/* offset 0x33e0 */
+	PINGRP_HDMI_CEC = PINGRP_SDMMC3_DAT3 + 15, /* offset 0x33e0 */
 	PINGRP_SDMMC1_WP_N,
 	PINGRP_SDMMC3_CD_N,
-	PINGRP_SPI1_CS1_N,
-	PINGRP_SPI1_CS2_N,
-	PINGRP_USB_VBUS_EN0,    /* offset 0x33f4 */
+	PINGRP_GPIO_W2_AUD,
+	PINGRP_GPIO_W3_AUD,
+	PINGRP_USB_VBUS_EN0,	/* offset 0x33f4 */
 	PINGRP_USB_VBUS_EN1,
 	PINGRP_SDMMC3_CLK_LB_IN,
 	PINGRP_SDMMC3_CLK_LB_OUT,
-	PINGRP_NAND_GMI_CLK_LB,
-	PINGRP_RESET_OUT_N,
+	PINGRP_RESET_OUT_N = PINGRP_SDMMC3_CLK_LB_OUT + 2,
 	PINGRP_COUNT,
 };
 
@@ -298,41 +215,35 @@ enum pdrive_pingrp {
 	PDRIVE_PINGROUP_AT5,
 	PDRIVE_PINGROUP_CDEV1,
 	PDRIVE_PINGROUP_CDEV2,
-	PDRIVE_PINGROUP_CSUS,
-	PDRIVE_PINGROUP_DAP1,
+	PDRIVE_PINGROUP_DAP1 = 10,	/* offset 0x890 */
 	PDRIVE_PINGROUP_DAP2,
 	PDRIVE_PINGROUP_DAP3,
 	PDRIVE_PINGROUP_DAP4,
 	PDRIVE_PINGROUP_DBG,
-	PDRIVE_PINGROUP_LCD1,
-	PDRIVE_PINGROUP_LCD2,
-	PDRIVE_PINGROUP_SDIO2,
-	PDRIVE_PINGROUP_SDIO3,
+	PDRIVE_PINGROUP_SDIO3 = 18,	/* offset 0x8B0 */
 	PDRIVE_PINGROUP_SPI,
 	PDRIVE_PINGROUP_UAA,
 	PDRIVE_PINGROUP_UAB,
 	PDRIVE_PINGROUP_UART2,
 	PDRIVE_PINGROUP_UART3,
-	PDRIVE_PINGROUP_VI1 = 24,       /* offset 0x8c8 */
-	PDRIVE_PINGROUP_SDIO1 = 33,     /* offset 0x8ec */
-	PDRIVE_PINGROUP_CRT = 36,       /* offset 0x8f8 */
-	PDRIVE_PINGROUP_DDC,
+	PDRIVE_PINGROUP_SDIO1 = 33,     /* offset 0x8EC */
+	PDRIVE_PINGROUP_DDC = 37,       /* offset 0x8FC */
 	PDRIVE_PINGROUP_GMA,
-	PDRIVE_PINGROUP_GMB,
-	PDRIVE_PINGROUP_GMC,
-	PDRIVE_PINGROUP_GMD,
-	PDRIVE_PINGROUP_GME,
+	PDRIVE_PINGROUP_GME = 42,	/* offset 0x910 */
 	PDRIVE_PINGROUP_GMF,
 	PDRIVE_PINGROUP_GMG,
 	PDRIVE_PINGROUP_GMH,
 	PDRIVE_PINGROUP_OWR,
 	PDRIVE_PINGROUP_UAD,
-	PDRIVE_PINGROUP_GPV,
 	PDRIVE_PINGROUP_DEV3 = 49,      /* offset 0x92c */
 	PDRIVE_PINGROUP_CEC = 52,       /* offset 0x938 */
-	PDRIVE_PINGROUP_AT6,
+	PDRIVE_PINGROUP_AT6 = 75,	/* offset 0x994 */
 	PDRIVE_PINGROUP_DAP5,
 	PDRIVE_PINGROUP_VBUS,
+	PDRIVE_PINGROUP_AO3,
+	PDRIVE_PINGROUP_HVC,
+	PDRIVE_PINGROUP_SDIO4,
+	PDRIVE_PINGROUP_AO0,
 	PDRIVE_PINGROUP_COUNT,
 };
 
@@ -401,6 +312,7 @@ enum pmux_func {
 	PMUX_FUNC_VI,
 	PMUX_FUNC_VI_SENSOR_CLK,
 	PMUX_FUNC_XIO,
+	/* End of Tegra2 MUX selectors */
 	PMUX_FUNC_BLINK,
 	PMUX_FUNC_CEC,
 	PMUX_FUNC_CLK12,
@@ -444,7 +356,7 @@ enum pmux_func {
 	PMUX_FUNC_VGP4,
 	PMUX_FUNC_VGP5,
 	PMUX_FUNC_VGP6,
-
+	/* End of Tegra3 MUX selectors */
 	PMUX_FUNC_USB,
 	PMUX_FUNC_SOC,
 	PMUX_FUNC_CPU,
@@ -453,10 +365,12 @@ enum pmux_func {
 	PMUX_FUNC_PMI,
 	PMUX_FUNC_CLDVFS,
 	PMUX_FUNC_RESET_OUT_N,
+	/* End of Tegra114 MUX selectors */
 
 	PMUX_FUNC_SAFE,
 	PMUX_FUNC_MAX,
 
+	PMUX_FUNC_INVALID = 0x4000,
 	PMUX_FUNC_RSVD1 = 0x8000,
 	PMUX_FUNC_RSVD2 = 0x8001,
 	PMUX_FUNC_RSVD3 = 0x8002,
@@ -492,6 +406,7 @@ enum pmux_tristate {
 enum pmux_pin_io {
 	PMUX_PIN_OUTPUT = 0,
 	PMUX_PIN_INPUT = 1,
+	PMUX_PIN_NONE,
 };
 /* return 1 if a pin_io_is in range */
 #define pmux_pin_io_isvalid(io) (((io) >= PMUX_PIN_OUTPUT) && \
@@ -525,6 +440,16 @@ enum pmux_pin_ioreset {
 				(((ioreset) >= PMUX_PIN_IO_RESET_DEFAULT) && \
 				((ioreset) <= PMUX_PIN_IO_RESET_ENABLE))
 
+enum pmux_pin_rcv_sel {
+	PMUX_PIN_RCV_SEL_DEFAULT = 0,
+	PMUX_PIN_RCV_SEL_NORMAL,
+	PMUX_PIN_RCV_SEL_HIGH,
+};
+/* return 1 if a pin_rcv_sel_is in range */
+#define pmux_pin_rcv_sel_isvalid(rcv_sel) \
+				(((rcv_sel) >= PMUX_PIN_RCV_SEL_DEFAULT) && \
+				((rcv_sel) <= PMUX_PIN_RCV_SEL_HIGH))
+
 /* Available power domains used by pin groups */
 enum pmux_vddio {
 	PMUX_VDDIO_BB = 0,
@@ -546,10 +471,73 @@ enum pmux_vddio {
 	PMUX_VDDIO_NONE
 };
 
-/* T114 pin drive group and pin mux registers */
-#define PDRIVE_PINGROUP_OFFSET  (0x868 >> 2)
-#define PMUX_OFFSET     ((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \
-			PDRIVE_PINGROUP_COUNT)
+#define PGRP_SLWF_NONE	-1
+#define PGRP_SLWF_MAX	3
+#define PGRP_SLWR_NONE	PGRP_SLWF_NONE
+#define PGRP_SLWR_MAX	PGRP_SLWF_MAX
+
+#define PGRP_DRVUP_NONE	-1
+#define PGRP_DRVUP_MAX	127
+#define PGRP_DRVDN_NONE	PGRP_DRVUP_NONE
+#define PGRP_DRVDN_MAX	PGRP_DRVUP_MAX
+
+#define PGRP_SCHMT_NONE	-1
+#define PGRP_HSM_NONE	PGRP_SCHMT_NONE
+
+/* return 1 if a padgrp is in range */
+#define pmux_padgrp_isvalid(pd) (((pd) >= 0) && ((pd) < PDRIVE_PINGROUP_COUNT))
+
+/* return 1 if a slew-rate rising/falling edge value is in range */
+#define pmux_pad_slw_isvalid(slw) (((slw) == PGRP_SLWF_NONE) || \
+				(((slw) >= 0) && ((slw) <= PGRP_SLWF_MAX)))
+
+/* return 1 if a driver output pull-up/down strength code value is in range */
+#define pmux_pad_drv_isvalid(drv) (((drv) == PGRP_DRVUP_NONE) || \
+				(((drv) >= 0) && ((drv) <= PGRP_DRVUP_MAX)))
+
+/* return 1 if a low-power mode value is in range */
+#define pmux_pad_lpmd_isvalid(lpm) (((lpm) == PGRP_LPMD_NONE) || \
+				(((lpm) >= 0) && ((lpm) <= PGRP_LPMD_X)))
+
+/* Defines a pin group cfg's low-power mode select */
+enum pgrp_lpmd {
+	PGRP_LPMD_X8 = 0,
+	PGRP_LPMD_X4,
+	PGRP_LPMD_X2,
+	PGRP_LPMD_X,
+	PGRP_LPMD_NONE = -1,
+};
+
+/* Defines whether a pin group cfg's schmidt is enabled or not */
+enum pgrp_schmt {
+	PGRP_SCHMT_DISABLE = 0,
+	PGRP_SCHMT_ENABLE = 1,
+};
+
+/* Defines whether a pin group cfg's high-speed mode is enabled or not */
+enum pgrp_hsm {
+	PGRP_HSM_DISABLE = 0,
+	PGRP_HSM_ENABLE = 1,
+};
+
+/*
+ * This defines the configuration for a pin group's pad control config
+ */
+struct padctrl_config {
+	enum pdrive_pingrp padgrp;	/* pin group PDRIVE_PINGRP_x */
+	int slwf;			/* falling edge slew         */
+	int slwr;			/* rising edge slew          */
+	int drvup;			/* pull-up drive strength    */
+	int drvdn;			/* pull-down drive strength  */
+	enum pgrp_lpmd lpmd;		/* low-power mode selection  */
+	enum pgrp_schmt schmt;		/* schmidt enable            */
+	enum pgrp_hsm hsm;		/* high-speed mode enable    */
+};
+
+/* t114 pin drive group and pin mux registers */
+#define PDRIVE_PINGROUP_OFFSET	(0x868 >> 2)
+#define PMUX_OFFSET	((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \
+				PDRIVE_PINGROUP_COUNT)
 struct pmux_tri_ctlr {
 	uint pmt_reserved0;		/* ABP_MISC_PP_ reserved offset 00 */
 	uint pmt_reserved1;		/* ABP_MISC_PP_ reserved offset 04 */
@@ -581,6 +569,8 @@ struct pingroup_config {
 	enum pmux_pin_lock lock;	/* lock enable/disable PMUX_PIN...  */
 	enum pmux_pin_od od;		/* open-drain or push-pull driver  */
 	enum pmux_pin_ioreset ioreset;	/* input/output reset PMUX_PIN...  */
+	enum pmux_pin_rcv_sel rcv_sel;	/* select between High and Normal  */
+					/* VIL/VIH receivers */
 };
 
 /* Set a pin group to tristate */
@@ -615,4 +605,12 @@ void pinmux_config_table(struct pingroup_config *config, int len);
 /* Set a group of pins from a table */
 void pinmux_init(void);
 
-#endif  /* _TEGRA114_PINMUX_H_ */
+/**
+ * Set the GP pad configs
+ *
+ * @param config	List of config items
+ * @param len		Number of config items in list
+ */
+void padgrp_config_table(struct padctrl_config *config, int len);
+
+#endif	/* _TEGRA114_PINMUX_H_ */
diff --git a/arch/arm/include/asm/arch-tegra20/tegra.h b/arch/arm/include/asm/arch-tegra20/tegra.h
index e1de0447ff6..ad5c01d1f4d 100644
--- a/arch/arm/include/asm/arch-tegra20/tegra.h
+++ b/arch/arm/include/asm/arch-tegra20/tegra.h
@@ -29,7 +29,6 @@
 #include <asm/arch-tegra/tegra.h>
 
 #define TEGRA_USB1_BASE		0xC5000000
-#define TEGRA_USB3_BASE		0xC5008000
 
 #define BCT_ODMDATA_OFFSET	4068	/* 12 bytes from end of BCT */
 
diff --git a/arch/arm/include/asm/arch-tegra30/gp_padctrl.h b/arch/arm/include/asm/arch-tegra30/gp_padctrl.h
index 9b383d0e746..23d184f2dd8 100644
--- a/arch/arm/include/asm/arch-tegra30/gp_padctrl.h
+++ b/arch/arm/include/asm/arch-tegra30/gp_padctrl.h
@@ -56,4 +56,10 @@ struct apb_misc_gp_ctlr {
 	u32	sdio1cfg;	/* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */
 };
 
+/* SDMMC1/3 settings from section 24.6 of T30 TRM */
+#define SDIOCFG_DRVUP_SLWF	1
+#define SDIOCFG_DRVDN_SLWR	1
+#define SDIOCFG_DRVUP		0x2E
+#define SDIOCFG_DRVDN		0x2A
+
 #endif	/* _TEGRA30_GP_PADCTRL_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/pinmux.h b/arch/arm/include/asm/arch-tegra30/pinmux.h
index 341951bfcb6..a9e1b462c4a 100644
--- a/arch/arm/include/asm/arch-tegra30/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra30/pinmux.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -531,6 +531,63 @@ enum pmux_vddio {
 	PMUX_VDDIO_NONE
 };
 
+#define PGRP_SLWF_NONE	-1
+#define PGRP_SLWF_MAX	3
+#define	PGRP_SLWR_NONE	PGRP_SLWF_NONE
+#define PGRP_SLWR_MAX	PGRP_SLWF_MAX
+
+#define PGRP_DRVUP_NONE	-1
+#define PGRP_DRVUP_MAX	127
+#define	PGRP_DRVDN_NONE	PGRP_DRVUP_NONE
+#define PGRP_DRVDN_MAX	PGRP_DRVUP_MAX
+
+/* return 1 if a padgrp is in range */
+#define pmux_padgrp_isvalid(pd) (((pd) >= 0) && ((pd) < PDRIVE_PINGROUP_COUNT))
+
+/* return 1 if a slew-rate rising/falling edge value is in range */
+#define pmux_pad_slw_isvalid(slw) (((slw) >= 0) && ((slw) <= PGRP_SLWF_MAX))
+
+/* return 1 if a driver output pull-up/down strength code value is in range */
+#define pmux_pad_drv_isvalid(drv) (((drv) >= 0) && ((drv) <= PGRP_DRVUP_MAX))
+
+/* return 1 if a low-power mode value is in range */
+#define pmux_pad_lpmd_isvalid(lpm) (((lpm) >= 0) && ((lpm) <= PGRP_LPMD_X))
+
+/* Defines a pin group cfg's low-power mode select */
+enum pgrp_lpmd {
+	PGRP_LPMD_X8 = 0,
+	PGRP_LPMD_X4,
+	PGRP_LPMD_X2,
+	PGRP_LPMD_X,
+	PGRP_LPMD_NONE = -1,
+};
+
+/* Defines whether a pin group cfg's schmidt is enabled or not */
+enum pgrp_schmt {
+	PGRP_SCHMT_DISABLE = 0,
+	PGRP_SCHMT_ENABLE = 1,
+};
+
+/* Defines whether a pin group cfg's high-speed mode is enabled or not */
+enum pgrp_hsm {
+	PGRP_HSM_DISABLE = 0,
+	PGRP_HSM_ENABLE = 1,
+};
+
+/*
+ * This defines the configuration for a pin group's pad control config
+ */
+struct padctrl_config {
+	enum pdrive_pingrp padgrp;	/* pin group PDRIVE_PINGRP_x */
+	int slwf;			/* falling edge slew         */
+	int slwr;			/* rising edge slew          */
+	int drvup;			/* pull-up drive strength    */
+	int drvdn;			/* pull-down drive strength  */
+	enum pgrp_lpmd lpmd;		/* low-power mode selection  */
+	enum pgrp_schmt schmt;		/* schmidt enable            */
+	enum pgrp_hsm hsm;		/* high-speed mode enable    */
+};
+
 /* t30 pin drive group and pin mux registers */
 #define PDRIVE_PINGROUP_OFFSET	(0x868 >> 2)
 #define PMUX_OFFSET	((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \
@@ -600,4 +657,12 @@ void pinmux_config_table(struct pingroup_config *config, int len);
 /* Set a group of pins from a table */
 void pinmux_init(void);
 
+/**
+ * Set the GP pad configs
+ *
+ * @param config	List of config items
+ * @param len		Number of config items in list
+ */
+void padgrp_config_table(struct padctrl_config *config, int len);
+
 #endif	/* _TEGRA30_PINMUX_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/tegra.h b/arch/arm/include/asm/arch-tegra30/tegra.h
index decf564d134..c02c5d85003 100644
--- a/arch/arm/include/asm/arch-tegra30/tegra.h
+++ b/arch/arm/include/asm/arch-tegra30/tegra.h
@@ -21,6 +21,8 @@
 
 #include <asm/arch-tegra/tegra.h>
 
+#define TEGRA_USB1_BASE		0x7D000000
+
 #define BCT_ODMDATA_OFFSET	6116	/* 12 bytes from end of BCT */
 
 #define MAX_NUM_CPU		4