Tegra30: Add common CPU (shared) files

These files are used by both SPL and main U-Boot.
Also made minor changes to shared Tegra code to support
T30 differences.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>

9 files changed, 1768 insertions, 56 deletions

diff --git a/arch/arm/cpu/tegra-common/ap.c b/arch/arm/cpu/tegra-common/ap.c
index c4eb1374803..aebe29e4b79 100644
--- a/arch/arm/cpu/tegra-common/ap.c
+++ b/arch/arm/cpu/tegra-common/ap.c
@@ -20,10 +20,14 @@
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */
+
+/* Tegra AP (Application Processor) code */
+
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/gp_padctrl.h>
 #include <asm/arch-tegra/ap.h>
+#include <asm/arch-tegra/clock.h>
 #include <asm/arch-tegra/fuse.h>
 #include <asm/arch-tegra/pmc.h>
 #include <asm/arch-tegra/scu.h>
@@ -58,6 +62,12 @@ int tegra_get_chip_type(void)
 			return TEGRA_SOC_T25;
 		}
 		break;
+	case CHIPID_TEGRA30:
+		switch (tegra_sku_id) {
+		case SKU_ID_T30:
+			return TEGRA_SOC_T30;
+		}
+		break;
 	}
 	/* unknown sku id */
 	return TEGRA_SOC_UNKNOWN;
@@ -93,7 +103,7 @@ static u32 get_odmdata(void)
 
 	u32 bct_start, odmdata;
 
-	bct_start = readl(AP20_BASE_PA_SRAM + NVBOOTINFOTABLE_BCTPTR);
+	bct_start = readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BCTPTR);
 	odmdata = readl(bct_start + BCT_ODMDATA_OFFSET);
 
 	return odmdata;
@@ -127,5 +137,5 @@ void s_init(void)
 		"orr	r0, r0, #0x41\n"
 		"mcr	p15, 0, r0, c1, c0, 1\n");
 
-	/* FIXME: should have ap20's L2 disabled too? */
+	/* FIXME: should have SoC's L2 disabled too? */
 }
diff --git a/arch/arm/cpu/tegra-common/board.c b/arch/arm/cpu/tegra-common/board.c
index b2e10c6db87..af1879c5018 100644
--- a/arch/arm/cpu/tegra-common/board.c
+++ b/arch/arm/cpu/tegra-common/board.c
@@ -54,16 +54,37 @@ unsigned int query_sdram_size(void)
 	reg = readl(&pmc->pmc_scratch20);
 	debug("pmc->pmc_scratch20 (ODMData) = 0x%08x\n", reg);
 
-	/* bits 31:28 in OdmData are used for RAM size  */
+#if defined(CONFIG_TEGRA20)
+	/* bits 30:28 in OdmData are used for RAM size on T20  */
+	reg &= 0x70000000;
+
 	switch ((reg) >> 28) {
 	case 1:
 		return 0x10000000;	/* 256 MB */
+	case 0:
 	case 2:
 	default:
 		return 0x20000000;	/* 512 MB */
 	case 3:
 		return 0x40000000;	/* 1GB */
 	}
+#else	/* Tegra30 */
+	/* bits 31:28 in OdmData are used for RAM size on T30  */
+	switch ((reg) >> 28) {
+	case 0:
+	case 1:
+	default:
+		return 0x10000000;	/* 256 MB */
+	case 2:
+		return 0x20000000;	/* 512 MB */
+	case 3:
+		return 0x30000000;	/* 768 MB */
+	case 4:
+		return 0x40000000;	/* 1GB */
+	case 8:
+		return 0x7ff00000;	/* 2GB - 1MB */
+	}
+#endif
 }
 
 int dram_init(void)
@@ -82,19 +103,27 @@ int checkboard(void)
 #endif	/* CONFIG_DISPLAY_BOARDINFO */
 
 static int uart_configs[] = {
-#if defined(CONFIG_TEGRA_UARTA_UAA_UAB)
+#if defined(CONFIG_TEGRA20)
+ #if defined(CONFIG_TEGRA_UARTA_UAA_UAB)
 	FUNCMUX_UART1_UAA_UAB,
-#elif defined(CONFIG_TEGRA_UARTA_GPU)
+ #elif defined(CONFIG_TEGRA_UARTA_GPU)
 	FUNCMUX_UART1_GPU,
-#elif defined(CONFIG_TEGRA_UARTA_SDIO1)
+ #elif defined(CONFIG_TEGRA_UARTA_SDIO1)
 	FUNCMUX_UART1_SDIO1,
-#else
+ #else
 	FUNCMUX_UART1_IRRX_IRTX,
-#endif
+ #endif
 	FUNCMUX_UART2_IRDA,
 	-1,
 	FUNCMUX_UART4_GMC,
 	-1,
+#else	/* Tegra30 */
+	FUNCMUX_UART1_ULPI,	/* UARTA */
+	-1,
+	-1,
+	-1,
+	-1,
+#endif
 };
 
 /**
diff --git a/arch/arm/cpu/tegra-common/sys_info.c b/arch/arm/cpu/tegra-common/sys_info.c
index 1a0bb561a7f..4632f15d5b4 100644
--- a/arch/arm/cpu/tegra-common/sys_info.c
+++ b/arch/arm/cpu/tegra-common/sys_info.c
@@ -22,12 +22,26 @@
  */
 
 #include <common.h>
+#include <linux/ctype.h>
 
 #ifdef CONFIG_DISPLAY_CPUINFO
+void upstring(char *s)
+{
+	while (*s) {
+		*s = toupper(*s);
+		s++;
+	}
+}
+
 /* Print CPU information */
 int print_cpuinfo(void)
 {
-	puts("TEGRA20\n");
+	char soc_name[10];
+
+	strncpy(soc_name, CONFIG_SYS_SOC, 10);
+	upstring(soc_name);
+	puts(soc_name);
+	puts("\n");
 
 	/* TBD: Add printf of major/minor rev info, stepping, etc. */
 	return 0;
diff --git a/arch/arm/cpu/tegra20-common/warmboot.c b/arch/arm/cpu/tegra20-common/warmboot.c
index 157b9abc459..0d472cfe33c 100644
--- a/arch/arm/cpu/tegra20-common/warmboot.c
+++ b/arch/arm/cpu/tegra20-common/warmboot.c
@@ -46,7 +46,7 @@ DECLARE_GLOBAL_DATA_PTR;
  * This is the place in SRAM where the SDRAM parameters are stored. There
  * are 4 blocks, one for each RAM code
  */
-#define SDRAM_PARAMS_BASE	(AP20_BASE_PA_SRAM + 0x188)
+#define SDRAM_PARAMS_BASE	(NV_PA_BASE_SRAM + 0x188)
 
 /* TODO: If we later add support for the Misc GP controller, refactor this */
 union xm2cfga_reg {
diff --git a/arch/arm/cpu/tegra30-common/Makefile b/arch/arm/cpu/tegra30-common/Makefile
new file mode 100644
index 00000000000..75fef32b0dc
--- /dev/null
+++ b/arch/arm/cpu/tegra30-common/Makefile
@@ -0,0 +1,44 @@
+#
+# Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+include $(TOPDIR)/config.mk
+
+# The AVP is ARMv4T architecture so we must use special compiler
+# flags for any startup files it might use.
+
+LIB	= $(obj)lib$(SOC)-common.o
+
+COBJS-y	+= clock.o funcmux.o pinmux.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS-y))
+
+all:	$(obj).depend $(LIB)
+
+$(LIB):	$(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/tegra30-common/clock.c b/arch/arm/cpu/tegra30-common/clock.c
new file mode 100644
index 00000000000..5db9d207a2d
--- /dev/null
+++ b/arch/arm/cpu/tegra30-common/clock.c
@@ -0,0 +1,1092 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra30 Clock control functions */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/timer.h>
+#include <div64.h>
+#include <fdtdec.h>
+
+/*
+ * This is our record of the current clock rate of each clock. We don't
+ * fill all of these in since we are only really interested in clocks which
+ * we use as parents.
+ */
+static unsigned pll_rate[CLOCK_ID_COUNT];
+
+/*
+ * The oscillator frequency is fixed to one of four set values. Based on this
+ * the other clocks are set up appropriately.
+ */
+static unsigned osc_freq[CLOCK_OSC_FREQ_COUNT] = {
+	13000000,
+	19200000,
+	12000000,
+	26000000,
+};
+
+/*
+ * Clock types that we can use as a source. The Tegra3 has muxes for the
+ * peripheral clocks, and in most cases there are four options for the clock
+ * source. This gives us a clock 'type' and exploits what commonality exists
+ * in the device.
+ *
+ * Letters are obvious, except for T which means CLK_M, and S which means the
+ * clock derived from 32KHz. Beware that CLK_M (also called OSC in the
+ * datasheet) and PLL_M are different things. The former is the basic
+ * clock supplied to the SOC from an external oscillator. The latter is the
+ * memory clock PLL.
+ *
+ * See definitions in clock_id in the header file.
+ */
+enum clock_type_id {
+	CLOCK_TYPE_AXPT,	/* PLL_A, PLL_X, PLL_P, CLK_M */
+	CLOCK_TYPE_MCPA,	/* and so on */
+	CLOCK_TYPE_MCPT,
+	CLOCK_TYPE_PCM,
+	CLOCK_TYPE_PCMT,
+	CLOCK_TYPE_PDCT,
+	CLOCK_TYPE_ACPT,
+	CLOCK_TYPE_ASPTE,
+	CLOCK_TYPE_PMDACD2T,
+	CLOCK_TYPE_PCST,
+
+	CLOCK_TYPE_COUNT,
+	CLOCK_TYPE_NONE = -1,	/* invalid clock type */
+};
+
+/* return 1 if a peripheral ID is in range */
+#define clock_type_id_isvalid(id) ((id) >= 0 && \
+		(id) < CLOCK_TYPE_COUNT)
+
+char pllp_valid = 1;	/* PLLP is set up correctly */
+
+enum {
+	CLOCK_MAX_MUX	= 8	/* number of source options for each clock */
+};
+
+enum {
+	MASK_BITS_31_30	= 2,	/* num of bits used to specify clock source */
+	MASK_BITS_31_29,
+	MASK_BITS_29_28,
+};
+
+/*
+ * Clock source mux for each clock type. This just converts our enum into
+ * a list of mux sources for use by the code.
+ *
+ * Note:
+ *  The extra column in each clock source array is used to store the mask
+ *  bits in its register for the source.
+ */
+#define CLK(x) CLOCK_ID_ ## x
+static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
+	{ CLK(AUDIO),	CLK(XCPU),	CLK(PERIPH),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(AUDIO),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(NONE),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(DISPLAY),	CLK(CGENERAL),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(AUDIO),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(AUDIO),	CLK(SFROM32KHZ),	CLK(PERIPH),	CLK(OSC),
+		CLK(EPCI),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_29},
+	{ CLK(PERIPH),	CLK(MEMORY),	CLK(DISPLAY),	CLK(AUDIO),
+		CLK(CGENERAL),	CLK(DISPLAY2),	CLK(OSC),	CLK(NONE),
+		MASK_BITS_31_29},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(SFROM32KHZ),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_29_28}
+};
+
+/* return 1 if a periphc_internal_id is in range */
+#define periphc_internal_id_isvalid(id) ((id) >= 0 && \
+		(id) < PERIPHC_COUNT)
+
+/*
+ * Clock type for each peripheral clock source. We put the name in each
+ * record just so it is easy to match things up
+ */
+#define TYPE(name, type) type
+static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
+	/* 0x00 */
+	TYPE(PERIPHC_I2S1,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2S2,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_SPDIF_OUT,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_SPDIF_IN,	CLOCK_TYPE_PCM),
+	TYPE(PERIPHC_PWM,	CLOCK_TYPE_PCST),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC2,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SBC3,	CLOCK_TYPE_PCMT),
+
+	/* 0x08 */
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_I2C1,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_DVC_I2C,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC1,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_DISP1,	CLOCK_TYPE_PMDACD2T),
+	TYPE(PERIPHC_DISP2,	CLOCK_TYPE_PMDACD2T),
+
+	/* 0x10 */
+	TYPE(PERIPHC_CVE,	CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VI,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SDMMC1,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SDMMC2,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_G3D,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_G2D,	CLOCK_TYPE_MCPA),
+
+	/* 0x18 */
+	TYPE(PERIPHC_NDFLASH,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SDMMC4,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_VFIR,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_EPP,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_MPE,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_MIPI,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_UART1,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_UART2,	CLOCK_TYPE_PCMT),
+
+	/* 0x20 */
+	TYPE(PERIPHC_HOST1X,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_TVO,	CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_HDMI,	CLOCK_TYPE_PMDACD2T),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_TVDAC,	CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_I2C2,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_EMC,	CLOCK_TYPE_MCPT),
+
+	/* 0x28 */
+	TYPE(PERIPHC_UART3,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VI,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC4,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_I2C3,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SDMMC3,	CLOCK_TYPE_PCMT),
+
+	/* 0x30 */
+	TYPE(PERIPHC_UART4,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_UART5,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_VDE,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_OWR,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NOR,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_CSITE,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_I2S0,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+
+	/* 0x38h */
+	TYPE(PERIPHC_G3D2,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_MSELECT,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_TSENSOR,	CLOCK_TYPE_PCM),
+	TYPE(PERIPHC_I2S3,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2S4,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2C4,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SBC5,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SBC6,	CLOCK_TYPE_PCMT),
+
+	/* 0x40 */
+	TYPE(PERIPHC_AUDIO,	CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_DAM0,	CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_DAM1,	CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_DAM2,	CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_ACTMON,	CLOCK_TYPE_PCM),
+	TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE),
+
+	/* 0x48 */
+	TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE),
+	TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE),
+	TYPE(PERIPHC_NANDSPEED,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_I2CSLOW,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SYS,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SPEEDO,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+
+	/* 0x50 */
+	TYPE(PERIPHC_SATAOOB,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SATA,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_HDA,	CLOCK_TYPE_PCMT),
+};
+
+/*
+ * This array translates a periph_id to a periphc_internal_id
+ *
+ * Not present/matched up:
+ *	uint vi_sensor;	 _VI_SENSOR_0,		0x1A8
+ *	SPDIF - which is both 0x08 and 0x0c
+ *
+ */
+#define NONE(name) (-1)
+#define OFFSET(name, value) PERIPHC_ ## name
+static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
+	/* Low word: 31:0 */
+	NONE(CPU),
+	NONE(COP),
+	NONE(TRIGSYS),
+	NONE(RESERVED3),
+	NONE(RESERVED4),
+	NONE(TMR),
+	PERIPHC_UART1,
+	PERIPHC_UART2,	/* and vfir 0x68 */
+
+	/* 8 */
+	NONE(GPIO),
+	PERIPHC_SDMMC2,
+	NONE(SPDIF),		/* 0x08 and 0x0c, unclear which to use */
+	PERIPHC_I2S1,
+	PERIPHC_I2C1,
+	PERIPHC_NDFLASH,
+	PERIPHC_SDMMC1,
+	PERIPHC_SDMMC4,
+
+	/* 16 */
+	NONE(RESERVED16),
+	PERIPHC_PWM,
+	PERIPHC_I2S2,
+	PERIPHC_EPP,
+	PERIPHC_VI,
+	PERIPHC_G2D,
+	NONE(USBD),
+	NONE(ISP),
+
+	/* 24 */
+	PERIPHC_G3D,
+	NONE(RESERVED25),
+	PERIPHC_DISP2,
+	PERIPHC_DISP1,
+	PERIPHC_HOST1X,
+	NONE(VCP),
+	PERIPHC_I2S0,
+	NONE(CACHE2),
+
+	/* Middle word: 63:32 */
+	NONE(MEM),
+	NONE(AHBDMA),
+	NONE(APBDMA),
+	NONE(RESERVED35),
+	NONE(RESERVED36),
+	NONE(STAT_MON),
+	NONE(RESERVED38),
+	NONE(RESERVED39),
+
+	/* 40 */
+	NONE(KFUSE),
+	NONE(SBC1),	/* SBC1, 0x34, is this SPI1? */
+	PERIPHC_NOR,
+	NONE(RESERVED43),
+	PERIPHC_SBC2,
+	NONE(RESERVED45),
+	PERIPHC_SBC3,
+	PERIPHC_DVC_I2C,
+
+	/* 48 */
+	NONE(DSI),
+	PERIPHC_TVO,	/* also CVE 0x40 */
+	PERIPHC_MIPI,
+	PERIPHC_HDMI,
+	NONE(CSI),
+	PERIPHC_TVDAC,
+	PERIPHC_I2C2,
+	PERIPHC_UART3,
+
+	/* 56 */
+	NONE(RESERVED56),
+	PERIPHC_EMC,
+	NONE(USB2),
+	NONE(USB3),
+	PERIPHC_MPE,
+	PERIPHC_VDE,
+	NONE(BSEA),
+	NONE(BSEV),
+
+	/* Upper word 95:64 */
+	PERIPHC_SPEEDO,
+	PERIPHC_UART4,
+	PERIPHC_UART5,
+	PERIPHC_I2C3,
+	PERIPHC_SBC4,
+	PERIPHC_SDMMC3,
+	NONE(PCIE),
+	PERIPHC_OWR,
+
+	/* 72 */
+	NONE(AFI),
+	PERIPHC_CSITE,
+	NONE(PCIEXCLK),
+	NONE(AVPUCQ),
+	NONE(RESERVED76),
+	NONE(RESERVED77),
+	NONE(RESERVED78),
+	NONE(DTV),
+
+	/* 80 */
+	PERIPHC_NANDSPEED,
+	PERIPHC_I2CSLOW,
+	NONE(DSIB),
+	NONE(RESERVED83),
+	NONE(IRAMA),
+	NONE(IRAMB),
+	NONE(IRAMC),
+	NONE(IRAMD),
+
+	/* 88 */
+	NONE(CRAM2),
+	NONE(RESERVED89),
+	NONE(MDOUBLER),
+	NONE(RESERVED91),
+	NONE(SUSOUT),
+	NONE(RESERVED93),
+	NONE(RESERVED94),
+	NONE(RESERVED95),
+
+	/* V word: 31:0 */
+	NONE(CPUG),
+	NONE(CPULP),
+	PERIPHC_G3D2,
+	PERIPHC_MSELECT,
+	PERIPHC_TSENSOR,
+	PERIPHC_I2S3,
+	PERIPHC_I2S4,
+	PERIPHC_I2C4,
+
+	/* 08 */
+	PERIPHC_SBC5,
+	PERIPHC_SBC6,
+	PERIPHC_AUDIO,
+	NONE(APBIF),
+	PERIPHC_DAM0,
+	PERIPHC_DAM1,
+	PERIPHC_DAM2,
+	PERIPHC_HDA2CODEC2X,
+
+	/* 16 */
+	NONE(ATOMICS),
+	NONE(RESERVED17),
+	NONE(RESERVED18),
+	NONE(RESERVED19),
+	NONE(RESERVED20),
+	NONE(RESERVED21),
+	NONE(RESERVED22),
+	PERIPHC_ACTMON,
+
+	/* 24 */
+	NONE(RESERVED24),
+	NONE(RESERVED25),
+	NONE(RESERVED26),
+	NONE(RESERVED27),
+	PERIPHC_SATA,
+	PERIPHC_HDA,
+	NONE(RESERVED30),
+	NONE(RESERVED31),
+
+	/* W word: 31:0 */
+	NONE(HDA2HDMICODEC),
+	NONE(SATACOLD),
+	NONE(RESERVED0_PCIERX0),
+	NONE(RESERVED1_PCIERX1),
+	NONE(RESERVED2_PCIERX2),
+	NONE(RESERVED3_PCIERX3),
+	NONE(RESERVED4_PCIERX4),
+	NONE(RESERVED5_PCIERX5),
+
+	/* 40 */
+	NONE(CEC),
+	NONE(RESERVED6_PCIE2),
+	NONE(RESERVED7_EMC),
+	NONE(RESERVED8_HDMI),
+	NONE(RESERVED9_SATA),
+	NONE(RESERVED10_MIPI),
+	NONE(EX_RESERVED46),
+	NONE(EX_RESERVED47),
+};
+
+/*
+ * Get the oscillator frequency, from the corresponding hardware configuration
+ * field.
+ */
+enum clock_osc_freq clock_get_osc_freq(void)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+
+	reg = readl(&clkrst->crc_osc_ctrl);
+	return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
+}
+
+int clock_get_osc_bypass(void)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+
+	reg = readl(&clkrst->crc_osc_ctrl);
+	return (reg & OSC_XOBP_MASK) >> OSC_XOBP_SHIFT;
+}
+
+/* Returns a pointer to the registers of the given pll */
+static struct clk_pll *get_pll(enum clock_id clkid)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+
+	assert(clock_id_is_pll(clkid));
+	return &clkrst->crc_pll[clkid];
+}
+
+int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,
+		u32 *divp, u32 *cpcon, u32 *lfcon)
+{
+	struct clk_pll *pll = get_pll(clkid);
+	u32 data;
+
+	assert(clkid != CLOCK_ID_USB);
+
+	/* Safety check, adds to code size but is small */
+	if (!clock_id_is_pll(clkid) || clkid == CLOCK_ID_USB)
+		return -1;
+	data = readl(&pll->pll_base);
+	*divm = (data & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
+	*divn = (data & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT;
+	*divp = (data & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
+	data = readl(&pll->pll_misc);
+	*cpcon = (data & PLL_CPCON_MASK) >> PLL_CPCON_SHIFT;
+	*lfcon = (data & PLL_LFCON_MASK) >> PLL_LFCON_SHIFT;
+	return 0;
+}
+
+unsigned long clock_start_pll(enum clock_id clkid, u32 divm, u32 divn,
+		u32 divp, u32 cpcon, u32 lfcon)
+{
+	struct clk_pll *pll = get_pll(clkid);
+	u32 data;
+
+	/*
+	 * We cheat by treating all PLL (except PLLU) in the same fashion.
+	 * This works only because:
+	 * - same fields are always mapped at same offsets, except DCCON
+	 * - DCCON is always 0, doesn't conflict
+	 * - M,N, P of PLLP values are ignored for PLLP
+	 */
+	data = (cpcon << PLL_CPCON_SHIFT) | (lfcon << PLL_LFCON_SHIFT);
+	writel(data, &pll->pll_misc);
+
+	data = (divm << PLL_DIVM_SHIFT) | (divn << PLL_DIVN_SHIFT) |
+			(0 << PLL_BYPASS_SHIFT) | (1 << PLL_ENABLE_SHIFT);
+
+	if (clkid == CLOCK_ID_USB)
+		data |= divp << PLLU_VCO_FREQ_SHIFT;
+	else
+		data |= divp << PLL_DIVP_SHIFT;
+	writel(data, &pll->pll_base);
+
+	/* calculate the stable time */
+	return timer_get_us() + CLOCK_PLL_STABLE_DELAY_US;
+}
+
+/* Returns a pointer to the clock source register for a peripheral */
+static u32 *get_periph_source_reg(enum periph_id periph_id)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	enum periphc_internal_id internal_id;
+
+	/* Coresight is a special case */
+	if (periph_id == PERIPH_ID_CSI)
+		return &clkrst->crc_clk_src[PERIPH_ID_CSI+1];
+
+	assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT);
+	internal_id = periph_id_to_internal_id[periph_id];
+	assert(internal_id != -1);
+	if (internal_id >= PERIPHC_VW_FIRST) {
+		internal_id -= PERIPHC_VW_FIRST;
+		return &clkrst->crc_clk_src_vw[internal_id];
+	} else
+		return &clkrst->crc_clk_src[internal_id];
+}
+
+void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
+			      unsigned divisor)
+{
+	u32 *reg = get_periph_source_reg(periph_id);
+	u32 value;
+
+	value = readl(reg);
+
+	value &= ~OUT_CLK_SOURCE_MASK;
+	value |= source << OUT_CLK_SOURCE_SHIFT;
+
+	value &= ~OUT_CLK_DIVISOR_MASK;
+	value |= divisor << OUT_CLK_DIVISOR_SHIFT;
+
+	writel(value, reg);
+}
+
+void clock_ll_set_source(enum periph_id periph_id, unsigned source)
+{
+	u32 *reg = get_periph_source_reg(periph_id);
+
+	clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
+			source << OUT_CLK_SOURCE_SHIFT);
+}
+
+/**
+ * Given the parent's rate and the required rate for the children, this works
+ * out the peripheral clock divider to use, in 7.1 binary format.
+ *
+ * @param divider_bits	number of divider bits (8 or 16)
+ * @param parent_rate	clock rate of parent clock in Hz
+ * @param rate		required clock rate for this clock
+ * @return divider which should be used
+ */
+static int clk_get_divider(unsigned divider_bits, unsigned long parent_rate,
+			   unsigned long rate)
+{
+	u64 divider = parent_rate * 2;
+	unsigned max_divider = 1 << divider_bits;
+
+	divider += rate - 1;
+	do_div(divider, rate);
+
+	if ((s64)divider - 2 < 0)
+		return 0;
+
+	if ((s64)divider - 2 >= max_divider)
+		return -1;
+
+	return divider - 2;
+}
+
+/**
+ * Given the parent's rate and the divider in 7.1 format, this works out the
+ * resulting peripheral clock rate.
+ *
+ * @param parent_rate	clock rate of parent clock in Hz
+ * @param divider which should be used in 7.1 format
+ * @return effective clock rate of peripheral
+ */
+static unsigned long get_rate_from_divider(unsigned long parent_rate,
+					   int divider)
+{
+	u64 rate;
+
+	rate = (u64)parent_rate * 2;
+	do_div(rate, divider + 2);
+	return rate;
+}
+
+unsigned long clock_get_periph_rate(enum periph_id periph_id,
+		enum clock_id parent)
+{
+	u32 *reg = get_periph_source_reg(periph_id);
+
+	return get_rate_from_divider(pll_rate[parent],
+		(readl(reg) & OUT_CLK_DIVISOR_MASK) >> OUT_CLK_DIVISOR_SHIFT);
+}
+
+/**
+ * Find the best available 7.1 format divisor given a parent clock rate and
+ * required child clock rate. This function assumes that a second-stage
+ * divisor is available which can divide by powers of 2 from 1 to 256.
+ *
+ * @param divider_bits	number of divider bits (8 or 16)
+ * @param parent_rate	clock rate of parent clock in Hz
+ * @param rate		required clock rate for this clock
+ * @param extra_div	value for the second-stage divisor (not set if this
+ *			function returns -1.
+ * @return divider which should be used, or -1 if nothing is valid
+ *
+ */
+static int find_best_divider(unsigned divider_bits, unsigned long parent_rate,
+			     unsigned long rate, int *extra_div)
+{
+	int shift;
+	int best_divider = -1;
+	int best_error = rate;
+
+	/* try dividers from 1 to 256 and find closest match */
+	for (shift = 0; shift <= 8 && best_error > 0; shift++) {
+		unsigned divided_parent = parent_rate >> shift;
+		int divider = clk_get_divider(divider_bits, divided_parent,
+					      rate);
+		unsigned effective_rate = get_rate_from_divider(divided_parent,
+						       divider);
+		int error = rate - effective_rate;
+
+		/* Given a valid divider, look for the lowest error */
+		if (divider != -1 && error < best_error) {
+			best_error = error;
+			*extra_div = 1 << shift;
+			best_divider = divider;
+		}
+	}
+
+	/* return what we found - *extra_div will already be set */
+	return best_divider;
+}
+
+/**
+ * Given a peripheral ID and the required source clock, this returns which
+ * value should be programmed into the source mux for that peripheral.
+ *
+ * There is special code here to handle the one source type with 5 sources.
+ *
+ * @param periph_id	peripheral to start
+ * @param source	PLL id of required parent clock
+ * @param mux_bits	Set to number of bits in mux register: 2 or 4
+ * @param divider_bits	Set to number of divider bits (8 or 16)
+ * @return mux value (0-4, or -1 if not found)
+ */
+static int get_periph_clock_source(enum periph_id periph_id,
+		enum clock_id parent, int *mux_bits, int *divider_bits)
+{
+	enum clock_type_id type;
+	enum periphc_internal_id internal_id;
+	int mux;
+
+	assert(clock_periph_id_isvalid(periph_id));
+
+	internal_id = periph_id_to_internal_id[periph_id];
+	assert(periphc_internal_id_isvalid(internal_id));
+
+	type = clock_periph_type[internal_id];
+	assert(clock_type_id_isvalid(type));
+
+	*mux_bits = clock_source[type][CLOCK_MAX_MUX];
+
+	for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
+		if (clock_source[type][mux] == parent)
+			return mux;
+
+	/* if we get here, either us or the caller has made a mistake */
+	printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id,
+		parent);
+	return -1;
+}
+
+/**
+ * Adjust peripheral PLL to use the given divider and source.
+ *
+ * @param periph_id	peripheral to adjust
+ * @param source	Source number (0-3 or 0-7)
+ * @param mux_bits	Number of mux bits (2 or 4)
+ * @param divider	Required divider in 7.1 or 15.1 format
+ * @return 0 if ok, -1 on error (requesting a parent clock which is not valid
+ *		for this peripheral)
+ */
+static int adjust_periph_pll(enum periph_id periph_id, int source,
+			     int mux_bits, unsigned divider)
+{
+	u32 *reg = get_periph_source_reg(periph_id);
+
+	clrsetbits_le32(reg, OUT_CLK_DIVISOR_MASK,
+			divider << OUT_CLK_DIVISOR_SHIFT);
+	udelay(1);
+
+	/* work out the source clock and set it */
+	if (source < 0)
+		return -1;
+	if (mux_bits == 4) {
+		clrsetbits_le32(reg, OUT_CLK_SOURCE4_MASK,
+			source << OUT_CLK_SOURCE4_SHIFT);
+	} else {
+		clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
+			source << OUT_CLK_SOURCE_SHIFT);
+	}
+	udelay(2);
+	return 0;
+}
+
+unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
+		enum clock_id parent, unsigned rate, int *extra_div)
+{
+	unsigned effective_rate;
+	int mux_bits, source;
+	int divider, divider_bits = 0;
+
+	/* work out the source clock and set it */
+	source = get_periph_clock_source(periph_id, parent, &mux_bits,
+					 &divider_bits);
+
+	if (extra_div)
+		divider = find_best_divider(divider_bits, pll_rate[parent],
+					    rate, extra_div);
+	else
+		divider = clk_get_divider(divider_bits, pll_rate[parent],
+					  rate);
+	assert(divider >= 0);
+	if (adjust_periph_pll(periph_id, source, mux_bits, divider))
+		return -1U;
+	debug("periph %d, rate=%d, reg=%p = %x\n", periph_id, rate,
+		get_periph_source_reg(periph_id),
+		readl(get_periph_source_reg(periph_id)));
+
+	/* Check what we ended up with. This shouldn't matter though */
+	effective_rate = clock_get_periph_rate(periph_id, parent);
+	if (extra_div)
+		effective_rate /= *extra_div;
+	if (rate != effective_rate)
+		debug("Requested clock rate %u not honored (got %u)\n",
+		       rate, effective_rate);
+	return effective_rate;
+}
+
+unsigned clock_start_periph_pll(enum periph_id periph_id,
+		enum clock_id parent, unsigned rate)
+{
+	unsigned effective_rate;
+
+	reset_set_enable(periph_id, 1);
+	clock_enable(periph_id);
+
+	effective_rate = clock_adjust_periph_pll_div(periph_id, parent, rate,
+						 NULL);
+
+	reset_set_enable(periph_id, 0);
+	return effective_rate;
+}
+
+void clock_set_enable(enum periph_id periph_id, int enable)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 *clk;
+	u32 reg;
+
+	/* Enable/disable the clock to this peripheral */
+	assert(clock_periph_id_isvalid(periph_id));
+	if ((int)periph_id < (int)PERIPH_ID_VW_FIRST)
+		clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
+	else
+		clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)];
+	reg = readl(clk);
+	if (enable)
+		reg |= PERIPH_MASK(periph_id);
+	else
+		reg &= ~PERIPH_MASK(periph_id);
+	writel(reg, clk);
+}
+
+void clock_enable(enum periph_id clkid)
+{
+	clock_set_enable(clkid, 1);
+}
+
+void clock_disable(enum periph_id clkid)
+{
+	clock_set_enable(clkid, 0);
+}
+
+void reset_set_enable(enum periph_id periph_id, int enable)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 *reset;
+	u32 reg;
+
+	/* Enable/disable reset to the peripheral */
+	assert(clock_periph_id_isvalid(periph_id));
+	if (periph_id < PERIPH_ID_VW_FIRST)
+		reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
+	else
+		reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)];
+	reg = readl(reset);
+	if (enable)
+		reg |= PERIPH_MASK(periph_id);
+	else
+		reg &= ~PERIPH_MASK(periph_id);
+	writel(reg, reset);
+}
+
+void reset_periph(enum periph_id periph_id, int us_delay)
+{
+	/* Put peripheral into reset */
+	reset_set_enable(periph_id, 1);
+	udelay(us_delay);
+
+	/* Remove reset */
+	reset_set_enable(periph_id, 0);
+
+	udelay(us_delay);
+}
+
+void reset_cmplx_set_enable(int cpu, int which, int reset)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 mask;
+
+	/* Form the mask, which depends on the cpu chosen. Tegra3 has 4 */
+	assert(cpu >= 0 && cpu < 4);
+	mask = which << cpu;
+
+	/* either enable or disable those reset for that CPU */
+	if (reset)
+		writel(mask, &clkrst->crc_cpu_cmplx_set);
+	else
+		writel(mask, &clkrst->crc_cpu_cmplx_clr);
+}
+
+unsigned clock_get_rate(enum clock_id clkid)
+{
+	struct clk_pll *pll;
+	u32 base;
+	u32 divm;
+	u64 parent_rate;
+	u64 rate;
+
+	parent_rate = osc_freq[clock_get_osc_freq()];
+	if (clkid == CLOCK_ID_OSC)
+		return parent_rate;
+
+	pll = get_pll(clkid);
+	base = readl(&pll->pll_base);
+
+	/* Oh for bf_unpack()... */
+	rate = parent_rate * ((base & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT);
+	divm = (base & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
+	if (clkid == CLOCK_ID_USB)
+		divm <<= (base & PLLU_VCO_FREQ_MASK) >> PLLU_VCO_FREQ_SHIFT;
+	else
+		divm <<= (base & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
+	do_div(rate, divm);
+	return rate;
+}
+
+/**
+ * Set the output frequency you want for each PLL clock.
+ * PLL output frequencies are programmed by setting their N, M and P values.
+ * The governing equations are:
+ *     VCO = (Fi / m) * n, Fo = VCO / (2^p)
+ *     where Fo is the output frequency from the PLL.
+ * Example: Set the output frequency to 216Mhz(Fo) with 12Mhz OSC(Fi)
+ *     216Mhz = ((12Mhz / m) * n) / (2^p) so n=432,m=12,p=1
+ * Please see Tegra TRM section 5.3 to get the detail for PLL Programming
+ *
+ * @param n PLL feedback divider(DIVN)
+ * @param m PLL input divider(DIVN)
+ * @param p post divider(DIVP)
+ * @param cpcon base PLL charge pump(CPCON)
+ * @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
+ *		be overriden), 1 if PLL is already correct
+ */
+static int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon)
+{
+	u32 base_reg;
+	u32 misc_reg;
+	struct clk_pll *pll;
+
+	pll = get_pll(clkid);
+
+	base_reg = readl(&pll->pll_base);
+
+	/* Set BYPASS, m, n and p to PLL_BASE */
+	base_reg &= ~PLL_DIVM_MASK;
+	base_reg |= m << PLL_DIVM_SHIFT;
+
+	base_reg &= ~PLL_DIVN_MASK;
+	base_reg |= n << PLL_DIVN_SHIFT;
+
+	base_reg &= ~PLL_DIVP_MASK;
+	base_reg |= p << PLL_DIVP_SHIFT;
+
+	if (clkid == CLOCK_ID_PERIPH) {
+		/*
+		 * If the PLL is already set up, check that it is correct
+		 * and record this info for clock_verify() to check.
+		 */
+		if (base_reg & PLL_BASE_OVRRIDE_MASK) {
+			base_reg |= PLL_ENABLE_MASK;
+			if (base_reg != readl(&pll->pll_base))
+				pllp_valid = 0;
+			return pllp_valid ? 1 : -1;
+		}
+		base_reg |= PLL_BASE_OVRRIDE_MASK;
+	}
+
+	base_reg |= PLL_BYPASS_MASK;
+	writel(base_reg, &pll->pll_base);
+
+	/* Set cpcon to PLL_MISC */
+	misc_reg = readl(&pll->pll_misc);
+	misc_reg &= ~PLL_CPCON_MASK;
+	misc_reg |= cpcon << PLL_CPCON_SHIFT;
+	writel(misc_reg, &pll->pll_misc);
+
+	/* Enable PLL */
+	base_reg |= PLL_ENABLE_MASK;
+	writel(base_reg, &pll->pll_base);
+
+	/* Disable BYPASS */
+	base_reg &= ~PLL_BYPASS_MASK;
+	writel(base_reg, &pll->pll_base);
+
+	return 0;
+}
+
+void clock_ll_start_uart(enum periph_id periph_id)
+{
+	/* Assert UART reset and enable clock */
+	reset_set_enable(periph_id, 1);
+	clock_enable(periph_id);
+	clock_ll_set_source(periph_id, 0); /* UARTx_CLK_SRC = 00, PLLP_OUT0 */
+
+	/* wait for 2us */
+	udelay(2);
+
+	/* De-assert reset to UART */
+	reset_set_enable(periph_id, 0);
+}
+
+#ifdef CONFIG_OF_CONTROL
+/*
+ * Convert a device tree clock ID to our peripheral ID. They are mostly
+ * the same but we are very cautious so we check that a valid clock ID is
+ * provided.
+ *
+ * @param clk_id	Clock ID according to tegra20 device tree binding
+ * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
+ */
+static enum periph_id clk_id_to_periph_id(int clk_id)
+{
+	if (clk_id > 95)
+		return PERIPH_ID_NONE;
+
+	switch (clk_id) {
+	case 1:
+	case 2:
+	case 7:
+	case 10:
+	case 20:
+	case 30:
+	case 35:
+	case 49:
+	case 56:
+	case 74:
+	case 76:
+	case 77:
+	case 78:
+	case 79:
+	case 80:
+	case 81:
+	case 82:
+	case 83:
+	case 91:
+	case 95:
+		return PERIPH_ID_NONE;
+	default:
+		return clk_id;
+	}
+}
+
+int clock_decode_periph_id(const void *blob, int node)
+{
+	enum periph_id id;
+	u32 cell[2];
+	int err;
+
+	err = fdtdec_get_int_array(blob, node, "clocks", cell,
+				   ARRAY_SIZE(cell));
+	if (err)
+		return -1;
+	id = clk_id_to_periph_id(cell[1]);
+	assert(clock_periph_id_isvalid(id));
+	return id;
+}
+#endif /* CONFIG_OF_CONTROL */
+
+int clock_verify(void)
+{
+	struct clk_pll *pll = get_pll(CLOCK_ID_PERIPH);
+	u32 reg = readl(&pll->pll_base);
+
+	if (!pllp_valid) {
+		printf("Warning: PLLP %x is not correct\n", reg);
+		return -1;
+	}
+	debug("PLLP %x is correct\n", reg);
+	return 0;
+}
+
+void clock_early_init(void)
+{
+	/*
+	 * PLLP output frequency set to 408Mhz
+	 * PLLC output frequency set to 228Mhz
+	 */
+	switch (clock_get_osc_freq()) {
+	case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
+		clock_set_rate(CLOCK_ID_PERIPH, 408, 12, 0, 8);
+		clock_set_rate(CLOCK_ID_CGENERAL, 456, 12, 1, 8);
+		break;
+
+	case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
+		clock_set_rate(CLOCK_ID_PERIPH, 408, 26, 0, 8);
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
+		break;
+
+	case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
+		clock_set_rate(CLOCK_ID_PERIPH, 408, 13, 0, 8);
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
+		break;
+	case CLOCK_OSC_FREQ_19_2:
+	default:
+		/*
+		 * These are not supported. It is too early to print a
+		 * message and the UART likely won't work anyway due to the
+		 * oscillator being wrong.
+		 */
+		break;
+	}
+}
+
+void clock_init(void)
+{
+	pll_rate[CLOCK_ID_MEMORY] = clock_get_rate(CLOCK_ID_MEMORY);
+	pll_rate[CLOCK_ID_PERIPH] = clock_get_rate(CLOCK_ID_PERIPH);
+	pll_rate[CLOCK_ID_CGENERAL] = clock_get_rate(CLOCK_ID_CGENERAL);
+	pll_rate[CLOCK_ID_OSC] = clock_get_rate(CLOCK_ID_OSC);
+	pll_rate[CLOCK_ID_SFROM32KHZ] = 32768;
+	debug("Osc = %d\n", pll_rate[CLOCK_ID_OSC]);
+	debug("PLLM = %d\n", pll_rate[CLOCK_ID_MEMORY]);
+	debug("PLLP = %d\n", pll_rate[CLOCK_ID_PERIPH]);
+}
diff --git a/arch/arm/cpu/tegra30-common/funcmux.c b/arch/arm/cpu/tegra30-common/funcmux.c
new file mode 100644
index 00000000000..e24c57efbdd
--- /dev/null
+++ b/arch/arm/cpu/tegra30-common/funcmux.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra30 high-level function multiplexing */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+
+int funcmux_select(enum periph_id id, int config)
+{
+	int bad_config = config != FUNCMUX_DEFAULT;
+
+	switch (id) {
+	case PERIPH_ID_UART1:
+		switch (config) {
+		case FUNCMUX_UART1_ULPI:
+			pinmux_set_func(PINGRP_ULPI_DATA0, PMUX_FUNC_UARTA);
+			pinmux_set_func(PINGRP_ULPI_DATA1, PMUX_FUNC_UARTA);
+			pinmux_set_func(PINGRP_ULPI_DATA2, PMUX_FUNC_UARTA);
+			pinmux_set_func(PINGRP_ULPI_DATA3, PMUX_FUNC_UARTA);
+			pinmux_tristate_disable(PINGRP_ULPI_DATA0);
+			pinmux_tristate_disable(PINGRP_ULPI_DATA1);
+			pinmux_tristate_disable(PINGRP_ULPI_DATA2);
+			pinmux_tristate_disable(PINGRP_ULPI_DATA3);
+			break;
+		}
+		break;
+
+	/* Add other periph IDs here as needed */
+
+	default:
+		debug("%s: invalid periph_id %d", __func__, id);
+		return -1;
+	}
+
+	if (bad_config) {
+		debug("%s: invalid config %d for periph_id %d", __func__,
+		      config, id);
+		return -1;
+	}
+	return 0;
+}
diff --git a/arch/arm/cpu/tegra30-common/pinmux.c b/arch/arm/cpu/tegra30-common/pinmux.c
new file mode 100644
index 00000000000..122665fd3c6
--- /dev/null
+++ b/arch/arm/cpu/tegra30-common/pinmux.c
@@ -0,0 +1,506 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra30 pin multiplexing functions */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch/pinmux.h>
+
+struct tegra_pingroup_desc {
+	const char *name;
+	enum pmux_func funcs[4];
+	enum pmux_func func_safe;
+	enum pmux_vddio vddio;
+	enum pmux_pin_io io;
+};
+
+#define PMUX_MUXCTL_SHIFT	0
+#define PMUX_PULL_SHIFT		2
+#define PMUX_TRISTATE_SHIFT	4
+#define PMUX_TRISTATE_MASK	(1 << PMUX_TRISTATE_SHIFT)
+#define PMUX_IO_SHIFT		5
+#define PMUX_OD_SHIFT		6
+#define PMUX_LOCK_SHIFT		7
+#define PMUX_IO_RESET_SHIFT	8
+
+/* Convenient macro for defining pin group properties */
+#define PIN(pg_name, vdd, f0, f1, f2, f3, iod)	\
+	{						\
+		.vddio = PMUX_VDDIO_ ## vdd,		\
+		.funcs = {				\
+			PMUX_FUNC_ ## f0,		\
+			PMUX_FUNC_ ## f1,		\
+			PMUX_FUNC_ ## f2,		\
+			PMUX_FUNC_ ## f3,		\
+		},					\
+		.func_safe = PMUX_FUNC_RSVD1,		\
+		.io = PMUX_PIN_ ## iod,			\
+	}
+
+/* Input and output pins */
+#define PINI(pg_name, vdd, f0, f1, f2, f3) \
+	PIN(pg_name, vdd, f0, f1, f2, f3, INPUT)
+#define PINO(pg_name, vdd, f0, f1, f2, f3) \
+	PIN(pg_name, vdd, f0, f1, f2, f3, OUTPUT)
+
+const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
+	/*	NAME	  VDD	   f0		f1	   f2	    f3  */
+	PINI(ULPI_DATA0,  BB,	   SPI3,	HSI,	   UARTA,   ULPI),
+	PINI(ULPI_DATA1,  BB,	   SPI3,	HSI,	   UARTA,   ULPI),
+	PINI(ULPI_DATA2,  BB,	   SPI3,	HSI,	   UARTA,   ULPI),
+	PINI(ULPI_DATA3,  BB,	   SPI3,	HSI,	   UARTA,   ULPI),
+	PINI(ULPI_DATA4,  BB,	   SPI2,	HSI,	   UARTA,   ULPI),
+	PINI(ULPI_DATA5,  BB,	   SPI2,	HSI,	   UARTA,   ULPI),
+	PINI(ULPI_DATA6,  BB,	   SPI2,	HSI,	   UARTA,   ULPI),
+	PINI(ULPI_DATA7,  BB,	   SPI2,	HSI,	   UARTA,   ULPI),
+	PINI(ULPI_CLK,	  BB,	   SPI1,	RSVD2,	   UARTD,   ULPI),
+	PINI(ULPI_DIR,	  BB,	   SPI1,	RSVD2,	   UARTD,   ULPI),
+	PINI(ULPI_NXT,	  BB,	   SPI1,	RSVD2,	   UARTD,   ULPI),
+	PINI(ULPI_STP,	  BB,	   SPI1,	RSVD2,	   UARTD,   ULPI),
+	PINI(DAP3_FS,	  BB,	   I2S2,	RSVD2,	   DISPA,   DISPB),
+	PINI(DAP3_DIN,	  BB,	   I2S2,	RSVD2,	   DISPA,   DISPB),
+	PINI(DAP3_DOUT,	  BB,	   I2S2,	RSVD2,	   DISPA,   DISPB),
+	PINI(DAP3_SCLK,	  BB,	   I2S2,	RSVD2,	   DISPA,   DISPB),
+	PINI(GPIO_PV0,	  BB,	   RSVD1,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(GPIO_PV1,	  BB,	   RSVD1,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(SDMMC1_CLK,  SDMMC1,  SDMMC1,	RSVD2,	   RSVD3,   UARTA),
+	PINI(SDMMC1_CMD,  SDMMC1,  SDMMC1,	RSVD2,	   RSVD3,   UARTA),
+	PINI(SDMMC1_DAT3, SDMMC1,  SDMMC1,	RSVD2,	   UARTE,   UARTA),
+	PINI(SDMMC1_DAT2, SDMMC1,  SDMMC1,	RSVD2,	   UARTE,   UARTA),
+	PINI(SDMMC1_DAT1, SDMMC1,  SDMMC1,	RSVD2,	   UARTE,   UARTA),
+	PINI(SDMMC1_DAT0, SDMMC1,  SDMMC1,	RSVD2,	   UARTE,   UARTA),
+	PINI(GPIO_PV2,	  SDMMC1,  OWR,		RSVD2,	   RSVD3,   RSVD4),
+	PINI(GPIO_PV3,	  SDMMC1,  CLK_12M_OUT,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(CLK2_OUT,	  SDMMC1,  EXTPERIPH2,	RSVD2,     RSVD3,   RSVD4),
+	PINI(CLK2_REQ,	  SDMMC1,  DAP,		RSVD2,	   RSVD3,   RSVD4),
+	PINO(LCD_PWR1,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_PWR2,	  LCD,	   DISPA,	DISPB,	   SPI5,    HDCP),
+	PINO(LCD_SDIN,	  LCD,	   DISPA,	DISPB,	   SPI5,    RSVD4),
+	PINO(LCD_SDOUT,	  LCD,	   DISPA,	DISPB,	   SPI5,    HDCP),
+	PINO(LCD_WR_N,	  LCD,	   DISPA,	DISPB,	   SPI5,    HDCP),
+	PINO(LCD_CS0_N,	  LCD,	   DISPA,	DISPB,	   SPI5,    RSVD4),
+	PINO(LCD_DC0,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_SCK,	  LCD,	   DISPA,	DISPB,	   SPI5,    HDCP),
+	PINO(LCD_PWR0,	  LCD,	   DISPA,	DISPB,	   SPI5,    HDCP),
+	PINO(LCD_PCLK,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_DE,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_HSYNC,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_VSYNC,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D0,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D1,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D2,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D3,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D4,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D5,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D6,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D7,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D8,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D9,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D10,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D11,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D12,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D13,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D14,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D15,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D16,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D17,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D18,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D19,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D20,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D21,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D22,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_D23,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_CS1_N,	  LCD,	   DISPA,	DISPB,	   SPI5,    RSVD4),
+	PINO(LCD_M1,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINO(LCD_DC1,	  LCD,	   DISPA,	DISPB,	   RSVD3,   RSVD4),
+	PINI(HDMI_INT,	  LCD,	   HDMI,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(DDC_SCL,	  LCD,	   I2C4,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(DDC_SDA,	  LCD,	   I2C4,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(CRT_HSYNC,	  LCD,	   CRT,		RSVD2,	   RSVD3,   RSVD4),
+	PINI(CRT_VSYNC,	  LCD,	   CRT,		RSVD2,	   RSVD3,   RSVD4),
+	PINI(VI_D0,	  VI,	   DDR,		RSVD2,	   VI,      RSVD4),
+	PINI(VI_D1,	  VI,	   DDR,		SDMMC2,	   VI,      RSVD4),
+	PINI(VI_D2,	  VI,	   DDR,		SDMMC2,	   VI,      RSVD4),
+	PINI(VI_D3,	  VI,	   DDR,		SDMMC2,	   VI,      RSVD4),
+	PINI(VI_D4,	  VI,	   DDR,		SDMMC2,	   VI,      RSVD4),
+	PINI(VI_D5,	  VI,	   DDR,		SDMMC2,	   VI,      RSVD4),
+	PINI(VI_D6,	  VI,	   DDR,		SDMMC2,	   VI,      RSVD4),
+	PINI(VI_D7,	  VI,	   DDR,		SDMMC2,	   VI,      RSVD4),
+	PINI(VI_D8,	  VI,	   DDR,		SDMMC2,	   VI,      RSVD4),
+	PINI(VI_D9,	  VI,	   DDR,		SDMMC2,	   VI,      RSVD4),
+	PINI(VI_D10,	  VI,	   DDR,		RSVD2,	   VI,      RSVD4),
+	PINI(VI_D11,	  VI,	   DDR,		RSVD2,	   VI,      RSVD4),
+	PINI(VI_PCLK,	  VI,	   RSVD1,	SDMMC2,	   VI,      RSVD4),
+	PINI(VI_MCLK,	  VI,	   VI,		VI,	   VI,      VI),
+	PINI(VI_VSYNC,	  VI,	   DDR,		RSVD2,	   VI,      RSVD4),
+	PINI(VI_HSYNC,	  VI,	   DDR,		RSVD2,	   VI,      RSVD4),
+	PINI(UART2_RXD,	  UART,	   UARTB,	SPDIF,	   UARTA,   SPI4),
+	PINI(UART2_TXD,	  UART,	   UARTB,	SPDIF,	   UARTA,   SPI4),
+	PINI(UART2_RTS_N, UART,	   UARTA,	UARTB,	   GMI,     SPI4),
+	PINI(UART2_CTS_N, UART,	   UARTA,	UARTB,	   GMI,     SPI4),
+	PINI(UART3_TXD,	  UART,	   UARTC,	RSVD2,	   GMI,     RSVD4),
+	PINI(UART3_RXD,	  UART,	   UARTC,	RSVD2,	   GMI,     RSVD4),
+	PINI(UART3_CTS_N, UART,	   UARTC,	RSVD2,	   GMI,     RSVD4),
+	PINI(UART3_RTS_N, UART,	   UARTC,	PWM0,	   GMI,     RSVD4),
+	PINI(GPIO_PU0,	  UART,	   OWR,		UARTA,	   GMI,     RSVD4),
+	PINI(GPIO_PU1,	  UART,	   RSVD1,	UARTA,	   GMI,     RSVD4),
+	PINI(GPIO_PU2,	  UART,	   RSVD1,	UARTA,	   GMI,     RSVD4),
+	PINI(GPIO_PU3,	  UART,	   PWM0,	UARTA,	   GMI,     RSVD4),
+	PINI(GPIO_PU4,	  UART,	   PWM1,	UARTA,	   GMI,     RSVD4),
+	PINI(GPIO_PU5,	  UART,	   PWM2,	UARTA,	   GMI,     RSVD4),
+	PINI(GPIO_PU6,	  UART,	   PWM3,	UARTA,	   GMI,     RSVD4),
+	PINI(GEN1_I2C_SDA, UART,   I2C1,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(GEN1_I2C_SCL, UART,   I2C1,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(DAP4_FS,	  UART,	   I2S3,	RSVD2,	   GMI,     RSVD4),
+	PINI(DAP4_DIN,	  UART,	   I2S3,	RSVD2,	   GMI,     RSVD4),
+	PINI(DAP4_DOUT,	  UART,	   I2S3,	RSVD2,	   GMI,     RSVD4),
+	PINI(DAP4_SCLK,	  UART,	   I2S3,	RSVD2,	   GMI,     RSVD4),
+	PINI(CLK3_OUT,	  UART,	   EXTPERIPH3,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(CLK3_REQ,	  UART,	   DEV3,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(GMI_WP_N,	  GMI,	   RSVD1,	NAND,	   GMI,     GMI_ALT),
+	PINI(GMI_IORDY,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_WAIT,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_ADV_N,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_CLK,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_CS0_N,	  GMI,	   RSVD1,	NAND,	   GMI,     DTV),
+	PINI(GMI_CS1_N,	  GMI,	   RSVD1,	NAND,	   GMI,     DTV),
+	PINI(GMI_CS2_N,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_CS3_N,	  GMI,	   RSVD1,	NAND,	   GMI,     GMI_ALT),
+	PINI(GMI_CS4_N,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_CS6_N,	  GMI,	   NAND,	NAND_ALT,  GMI,     SATA),
+	PINI(GMI_CS7_N,	  GMI,	   NAND,	NAND_ALT,  GMI,     GMI_ALT),
+	PINI(GMI_AD0,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_AD1,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_AD2,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_AD3,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_AD4,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_AD5,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_AD6,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_AD7,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_AD8,	  GMI,	   PWM0,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_AD9,	  GMI,	   PWM1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_AD10,	  GMI,	   PWM2,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_AD11,	  GMI,	   PWM3,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_AD12,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_AD13,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_AD14,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_AD15,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_A16,	  GMI,	   UARTD,	SPI4,	   GMI,     GMI_ALT),
+	PINI(GMI_A17,	  GMI,	   UARTD,	SPI4,	   GMI,     DTV),
+	PINI(GMI_A18,	  GMI,	   UARTD,	SPI4,	   GMI,     DTV),
+	PINI(GMI_A19,	  GMI,	   UARTD,	SPI4,	   GMI,     RSVD4),
+	PINI(GMI_WR_N,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_OE_N,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_DQS,	  GMI,	   RSVD1,	NAND,	   GMI,     RSVD4),
+	PINI(GMI_RST_N,	  GMI,	   NAND,	NAND_ALT,  GMI,     RSVD4),
+	PINI(GEN2_I2C_SCL, GMI,	   I2C2,	HDCP,	   GMI,     RSVD4),
+	PINI(GEN2_I2C_SDA, GMI,    I2C2,	HDCP,	   GMI,     RSVD4),
+	PINI(SDMMC4_CLK,  SDMMC4,   RSVD1,	NAND,	   GMI,     SDMMC4),
+	PINI(SDMMC4_CMD,  SDMMC4,   I2C3,	NAND,	   GMI,     SDMMC4),
+	PINI(SDMMC4_DAT0, SDMMC4,   UARTE,	SPI3,	   GMI,     SDMMC4),
+	PINI(SDMMC4_DAT1, SDMMC4,   UARTE,	SPI3,	   GMI,     SDMMC4),
+	PINI(SDMMC4_DAT2, SDMMC4,   UARTE,	SPI3,	   GMI,     SDMMC4),
+	PINI(SDMMC4_DAT3, SDMMC4,   UARTE,	SPI3,	   GMI,     SDMMC4),
+	PINI(SDMMC4_DAT4, SDMMC4,   I2C3,	I2S4,	   GMI,     SDMMC4),
+	PINI(SDMMC4_DAT5, SDMMC4,   VGP3,	I2S4,	   GMI,     SDMMC4),
+	PINI(SDMMC4_DAT6, SDMMC4,   VGP4,	I2S4,	   GMI,     SDMMC4),
+	PINI(SDMMC4_DAT7, SDMMC4,   VGP5,	I2S4,	   GMI,     SDMMC4),
+	PINI(SDMMC4_RST_N, SDMMC4,  VGP6,	RSVD2,	   RSVD3,   SDMMC4),
+	PINI(CAM_MCLK,	  CAM,	   VI,		RSVD2,	   VI_ALT2, SDMMC4),
+	PINI(GPIO_PCC1,	  CAM,	   I2S4,	RSVD2,	   RSVD3,   SDMMC4),
+	PINI(GPIO_PBB0,	  CAM,	   I2S4,	RSVD2,	   RSVD3,   SDMMC4),
+	PINI(CAM_I2C_SCL, CAM,	   VGP1,	I2C3,	   RSVD3,   SDMMC4),
+	PINI(CAM_I2C_SDA, CAM,	   VGP2,	I2C3,	   RSVD3,   SDMMC4),
+	PINI(GPIO_PBB3,	  CAM,	   VGP3,	DISPA,	   DISPB,   SDMMC4),
+	PINI(GPIO_PBB4,	  CAM,	   VGP4,	DISPA,	   DISPB,   SDMMC4),
+	PINI(GPIO_PBB5,	  CAM,	   VGP5,	DISPA,	   DISPB,   SDMMC4),
+	PINI(GPIO_PBB6,	  CAM,	   VGP6,	DISPA,	   DISPB,   SDMMC4),
+	PINI(GPIO_PBB7,	  CAM,	   I2S4,	RSVD2,	   RSVD3,   SDMMC4),
+	PINI(GPIO_PCC2,	  CAM,	   I2S4,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(JTAG_RTCK,	  SYS,	   RTCK,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(PWR_I2C_SCL, SYS,	   I2CPWR,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(PWR_I2C_SDA, SYS,	   I2CPWR,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(KB_ROW0,	  SYS,	   KBC,		NAND,	   RSVD3,   RSVD4),
+	PINI(KB_ROW1,	  SYS,	   KBC,		NAND,	   RSVD3,   RSVD4),
+	PINI(KB_ROW2,	  SYS,	   KBC,		NAND,	   RSVD3,   RSVD4),
+	PINI(KB_ROW3,	  SYS,	   KBC,		NAND,	   RSVD3,   RSVD4),
+	PINI(KB_ROW4,	  SYS,	   KBC,		NAND,	   TRACE,   RSVD4),
+	PINI(KB_ROW5,	  SYS,	   KBC,		NAND,	   TRACE,   OWR),
+	PINI(KB_ROW6,	  SYS,	   KBC,		NAND,	   SDMMC2,  MIO),
+	PINI(KB_ROW7,	  SYS,	   KBC,		NAND,	   SDMMC2,  MIO),
+	PINI(KB_ROW8,	  SYS,	   KBC,		NAND,	   SDMMC2,  MIO),
+	PINI(KB_ROW9,	  SYS,	   KBC,		NAND,	   SDMMC2,  MIO),
+	PINI(KB_ROW10,	  SYS,	   KBC,		NAND,	   SDMMC2,  MIO),
+	PINI(KB_ROW11,	  SYS,	   KBC,		NAND,	   SDMMC2,  MIO),
+	PINI(KB_ROW12,	  SYS,	   KBC,		NAND,	   SDMMC2,  MIO),
+	PINI(KB_ROW13,	  SYS,	   KBC,		NAND,	   SDMMC2,  MIO),
+	PINI(KB_ROW14,	  SYS,	   KBC,		NAND,	   SDMMC2,  MIO),
+	PINI(KB_ROW15,	  SYS,	   KBC,		NAND,	   SDMMC2,  MIO),
+	PINI(KB_COL0,	  SYS,	   KBC,		NAND,	   TRACE,   TEST),
+	PINI(KB_COL1,	  SYS,	   KBC,		NAND,	   TRACE,   TEST),
+	PINI(KB_COL2,	  SYS,	   KBC,		NAND,	   TRACE,   RSVD4),
+	PINI(KB_COL3,	  SYS,	   KBC,		NAND,	   TRACE,   RSVD4),
+	PINI(KB_COL4,	  SYS,	   KBC,		NAND,	   TRACE,   RSVD4),
+	PINI(KB_COL5,	  SYS,	   KBC,		NAND,	   TRACE,   RSVD4),
+	PINI(KB_COL6,	  SYS,	   KBC,		NAND,	   TRACE,   MIO),
+	PINI(KB_COL7,	  SYS,	   KBC,		NAND,	   TRACE,   MIO),
+	PINI(CLK_32K_OUT, SYS,	   BLINK,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(SYS_CLK_REQ, SYS,	   SYSCLK,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(CORE_PWR_REQ, SYS,	   CORE_PWR_REQ, RSVD2,	   RSVD3,   RSVD4),
+	PINI(CPU_PWR_REQ, SYS,	   CPU_PWR_REQ,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(PWR_INT_N,	  SYS,	   PWR_INT_N,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(CLK_32K_IN,  SYS,	   CLK_32K_IN,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(OWR,	  SYS,	   OWR,		CEC,	   RSVD3,   RSVD4),
+	PINI(DAP1_FS,	  AUDIO,   I2S0,	HDA,	   GMI,     SDMMC2),
+	PINI(DAP1_DIN,	  AUDIO,   I2S0,	HDA,	   GMI,     SDMMC2),
+	PINI(DAP1_DOUT,	  AUDIO,   I2S0,	HDA,	   GMI,     SDMMC2),
+	PINI(DAP1_SCLK,	  AUDIO,   I2S0,	HDA,	   GMI,     SDMMC2),
+	PINI(CLK1_REQ,	  AUDIO,   DAP,		HDA,	   RSVD3,   RSVD4),
+	PINI(CLK1_OUT,	  AUDIO,   EXTPERIPH1,	RSVD2,	   RSVD3,   RSVD4),
+	PINI(SPDIF_IN,	  AUDIO,   SPDIF,	HDA,	   I2C1,    SDMMC2),
+	PINI(SPDIF_OUT,	  AUDIO,   SPDIF,	RSVD2,	   I2C1,    SDMMC2),
+	PINI(DAP2_FS,	  AUDIO,   I2S1,	HDA,	   RSVD3,   GMI),
+	PINI(DAP2_DIN,	  AUDIO,   I2S1,	HDA,	   RSVD3,   GMI),
+	PINI(DAP2_DOUT,	  AUDIO,   I2S1,	HDA,	   RSVD3,   GMI),
+	PINI(DAP2_SCLK,	  AUDIO,   I2S1,	HDA,	   RSVD3,   GMI),
+	PINI(SPI2_MOSI,	  AUDIO,   SPI6,	SPI2,	   GMI,     GMI),
+	PINI(SPI2_MISO,	  AUDIO,   SPI6,	SPI2,	   GMI,     GMI),
+	PINI(SPI2_CS0_N,  AUDIO,   SPI6,	SPI2,	   GMI,     GMI),
+	PINI(SPI2_SCK,	  AUDIO,   SPI6,	SPI2,	   GMI,     GMI),
+	PINI(SPI1_MOSI,	  AUDIO,   SPI2,	SPI1,	   SPI2_ALT, GMI),
+	PINI(SPI1_SCK,	  AUDIO,   SPI2,	SPI1,	   SPI2_ALT, GMI),
+	PINI(SPI1_CS0_N,  AUDIO,   SPI2,	SPI1,	   SPI2_ALT, GMI),
+	PINI(SPI1_MISO,	  AUDIO,   SPI3,	SPI1,	   SPI2_ALT, RSVD4),
+	PINI(SPI2_CS1_N,  AUDIO,   SPI3,	SPI2,	   SPI2_ALT, I2C1),
+	PINI(SPI2_CS2_N,  AUDIO,   SPI3,	SPI2,	   SPI2_ALT, I2C1),
+	PINI(SDMMC3_CLK,  SDMMC3,  UARTA,	PWM2,	   SDMMC3,  SPI3),
+	PINI(SDMMC3_CMD,  SDMMC3,  UARTA,	PWM3,	   SDMMC3,  SPI2),
+	PINI(SDMMC3_DAT0, SDMMC3,  RSVD1,	RSVD2,	   SDMMC3,  SPI3),
+	PINI(SDMMC3_DAT1, SDMMC3,  RSVD1,	RSVD2,	   SDMMC3,  SPI3),
+	PINI(SDMMC3_DAT2, SDMMC3,  RSVD1,	PWM1,	   SDMMC3,  SPI3),
+	PINI(SDMMC3_DAT3, SDMMC3,  RSVD1,	PWM0,	   SDMMC3,  SPI3),
+	PINI(SDMMC3_DAT4, SDMMC3,  PWM1,	SPI4,	   SDMMC3,  SPI2),
+	PINI(SDMMC3_DAT5, SDMMC3,  PWM0,	SPI4,	   SDMMC3,  SPI2),
+	PINI(SDMMC3_DAT6, SDMMC3,  SPDIF,	SPI4,	   SDMMC3,  SPI2),
+	PINI(SDMMC3_DAT7, SDMMC3,  SPDIF,	SPI4,	   SDMMC3,  SPI2),
+	PINI(PEX_L0_PRSNT_N,	PEXCTL,   PCIE,	HDA,	   RSVD3,   RSVD4),
+	PINI(PEX_L0_RST_N,	PEXCTL,   PCIE,	HDA,	   RSVD3,   RSVD4),
+	PINI(PEX_L0_CLKREQ_N,	PEXCTL,   PCIE,	HDA,	   RSVD3,   RSVD4),
+	PINI(PEX_WAKE_N,	PEXCTL,   PCIE,	HDA,	   RSVD3,   RSVD4),
+	PINI(PEX_L1_PRSNT_N,	PEXCTL,   PCIE,	HDA,	   RSVD3,   RSVD4),
+	PINI(PEX_L1_RST_N,	PEXCTL,   PCIE,	HDA,	   RSVD3,   RSVD4),
+	PINI(PEX_L1_CLKREQ_N,	PEXCTL,   PCIE,	HDA,	   RSVD3,   RSVD4),
+	PINI(PEX_L2_PRSNT_N,	PEXCTL,   PCIE,	HDA,	   RSVD3,   RSVD4),
+	PINI(PEX_L2_RST_N,	PEXCTL,   PCIE,	HDA,	   RSVD3,   RSVD4),
+	PINI(PEX_L2_CLKREQ_N,	PEXCTL,   PCIE,	HDA,	   RSVD3,   RSVD4),
+	PINI(HDMI_CEC,		SYS,      CEC,	RSVD2,	   RSVD3,   RSVD4),
+};
+
+void pinmux_set_tristate(enum pmux_pingrp pin, int enable)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *tri = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin */
+	assert(pmux_pingrp_isvalid(pin));
+
+	reg = readl(tri);
+	if (enable)
+		reg |= PMUX_TRISTATE_MASK;
+	else
+		reg &= ~PMUX_TRISTATE_MASK;
+	writel(reg, tri);
+}
+
+void pinmux_tristate_enable(enum pmux_pingrp pin)
+{
+	pinmux_set_tristate(pin, 1);
+}
+
+void pinmux_tristate_disable(enum pmux_pingrp pin)
+{
+	pinmux_set_tristate(pin, 0);
+}
+
+void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pull = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin and pupd */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_pupd_isvalid(pupd));
+
+	reg = readl(pull);
+	reg &= ~(0x3 << PMUX_PULL_SHIFT);
+	reg |= (pupd << PMUX_PULL_SHIFT);
+	writel(reg, pull);
+}
+
+void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *muxctl = &pmt->pmt_ctl[pin];
+	int i, mux = -1;
+	u32 reg;
+
+	/* Error check on pin and func */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_func_isvalid(func));
+
+	/* Handle special values */
+	if (func == PMUX_FUNC_SAFE)
+		func = tegra_soc_pingroups[pin].func_safe;
+
+	if (func & PMUX_FUNC_RSVD1) {
+		mux = func & 0x3;
+	} else {
+		/* Search for the appropriate function */
+		for (i = 0; i < 4; i++) {
+			if (tegra_soc_pingroups[pin].funcs[i] == func) {
+				mux = i;
+				break;
+			}
+		}
+	}
+	assert(mux != -1);
+
+	reg = readl(muxctl);
+	reg &= ~(0x3 << PMUX_MUXCTL_SHIFT);
+	reg |= (mux << PMUX_MUXCTL_SHIFT);
+	writel(reg, muxctl);
+
+}
+
+void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pin_io = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin and io */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_io_isvalid(io));
+
+	reg = readl(pin_io);
+	reg &= ~(0x1 << PMUX_IO_SHIFT);
+	reg |= (io & 0x1) << PMUX_IO_SHIFT;
+	writel(reg, pin_io);
+}
+
+static int pinmux_set_lock(enum pmux_pingrp pin, enum pmux_pin_lock lock)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pin_lock = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin and lock */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_lock_isvalid(lock));
+
+	if (lock == PMUX_PIN_LOCK_DEFAULT)
+		return 0;
+
+	reg = readl(pin_lock);
+	reg &= ~(0x1 << PMUX_LOCK_SHIFT);
+	if (lock == PMUX_PIN_LOCK_ENABLE)
+		reg |= (0x1 << PMUX_LOCK_SHIFT);
+	else {
+		/* lock == DISABLE, which isn't possible */
+		printf("%s: Warning: lock == %d, DISABLE is not allowed!\n",
+			__func__, lock);
+	}
+	writel(reg, pin_lock);
+
+	return 0;
+}
+
+static int pinmux_set_od(enum pmux_pingrp pin, enum pmux_pin_od od)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pin_od = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin and od */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_od_isvalid(od));
+
+	if (od == PMUX_PIN_OD_DEFAULT)
+		return 0;
+
+	reg = readl(pin_od);
+	reg &= ~(0x1 << PMUX_OD_SHIFT);
+	if (od == PMUX_PIN_OD_ENABLE)
+		reg |= (0x1 << PMUX_OD_SHIFT);
+	writel(reg, pin_od);
+
+	return 0;
+}
+
+static int pinmux_set_ioreset(enum pmux_pingrp pin,
+				enum pmux_pin_ioreset ioreset)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pin_ioreset = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin and ioreset */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_ioreset_isvalid(ioreset));
+
+	if (ioreset == PMUX_PIN_IO_RESET_DEFAULT)
+		return 0;
+
+	reg = readl(pin_ioreset);
+	reg &= ~(0x1 << PMUX_IO_RESET_SHIFT);
+	if (ioreset == PMUX_PIN_IO_RESET_ENABLE)
+		reg |= (0x1 << PMUX_IO_RESET_SHIFT);
+	writel(reg, pin_ioreset);
+
+	return 0;
+}
+
+void pinmux_config_pingroup(struct pingroup_config *config)
+{
+	enum pmux_pingrp pin = config->pingroup;
+
+	pinmux_set_func(pin, config->func);
+	pinmux_set_pullupdown(pin, config->pull);
+	pinmux_set_tristate(pin, config->tristate);
+	pinmux_set_io(pin, config->io);
+	pinmux_set_lock(pin, config->lock);
+	pinmux_set_od(pin, config->od);
+	pinmux_set_ioreset(pin, config->ioreset);
+}
+
+void pinmux_config_table(struct pingroup_config *config, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		pinmux_config_pingroup(&config[i]);
+}
diff --git a/arch/arm/include/asm/arch-tegra/ap.h b/arch/arm/include/asm/arch-tegra/ap.h
index 70d94c50417..73dfd394d82 100644
--- a/arch/arm/include/asm/arch-tegra/ap.h
+++ b/arch/arm/include/asm/arch-tegra/ap.h
@@ -23,67 +23,27 @@
 #include <asm/types.h>
 
 /* Stabilization delays, in usec */
-#define PLL_STABILIZATION_DELAY (300)
+#define PLL_STABILIZATION_DELAY	(300)
 #define IO_STABILIZATION_DELAY	(1000)
 
-#define NVBL_PLLP_KHZ	(216000)
-
 #define PLLX_ENABLED		(1 << 30)
 #define CCLK_BURST_POLICY	0x20008888
 #define SUPER_CCLK_DIVIDER	0x80000000
 
 /* Calculate clock fractional divider value from ref and target frequencies */
-#define CLK_DIVIDER(REF, FREQ)  ((((REF) * 2) / FREQ) - 2)
+#define CLK_DIVIDER(REF, FREQ)	((((REF) * 2) / FREQ) - 2)
 
 /* Calculate clock frequency value from reference and clock divider value */
-#define CLK_FREQUENCY(REF, REG)  (((REF) * 2) / (REG + 2))
+#define CLK_FREQUENCY(REF, REG)	(((REF) * 2) / (REG + 2))
 
 /* AVP/CPU ID */
 #define PG_UP_TAG_0_PID_CPU	0x55555555	/* CPU aka "a9" aka "mpcore" */
-#define PG_UP_TAG_0             0x0
+#define PG_UP_TAG_0		0x0
 
 #define CORESIGHT_UNLOCK	0xC5ACCE55;
 
-/* AP20-Specific Base Addresses */
-
-/* AP20 Base physical address of SDRAM. */
-#define AP20_BASE_PA_SDRAM      0x00000000
-/* AP20 Base physical address of internal SRAM. */
-#define AP20_BASE_PA_SRAM       0x40000000
-/* AP20 Size of internal SRAM (256KB). */
-#define AP20_BASE_PA_SRAM_SIZE  0x00040000
-/* AP20 Base physical address of flash. */
-#define AP20_BASE_PA_NOR_FLASH  0xD0000000
-/* AP20 Base physical address of boot information table. */
-#define AP20_BASE_PA_BOOT_INFO  AP20_BASE_PA_SRAM
-
-/*
- * Super-temporary stacks for EXTREMELY early startup. The values chosen for
- * these addresses must be valid on ALL SOCs because this value is used before
- * we are able to differentiate between the SOC types.
- *
- * NOTE: The since CPU's stack will eventually be moved from IRAM to SDRAM, its
- *       stack is placed below the AVP stack. Once the CPU stack has been moved,
- *       the AVP is free to use the IRAM the CPU stack previously occupied if
- *       it should need to do so.
- *
- * NOTE: In multi-processor CPU complex configurations, each processor will have
- *       its own stack of size CPU_EARLY_BOOT_STACK_SIZE. CPU 0 will have a
- *       limit of CPU_EARLY_BOOT_STACK_LIMIT. Each successive CPU will have a
- *       stack limit that is CPU_EARLY_BOOT_STACK_SIZE less then the previous
- *       CPU.
- */
-
-/* Common AVP early boot stack limit */
-#define AVP_EARLY_BOOT_STACK_LIMIT	\
-	(AP20_BASE_PA_SRAM + (AP20_BASE_PA_SRAM_SIZE/2))
-/* Common AVP early boot stack size */
-#define AVP_EARLY_BOOT_STACK_SIZE	0x1000
-/* Common CPU early boot stack limit */
-#define CPU_EARLY_BOOT_STACK_LIMIT	\
-	(AVP_EARLY_BOOT_STACK_LIMIT - AVP_EARLY_BOOT_STACK_SIZE)
-/* Common CPU early boot stack size */
-#define CPU_EARLY_BOOT_STACK_SIZE	0x1000
+/* AP base physical address of internal SRAM */
+#define NV_PA_BASE_SRAM		0x40000000
 
 #define EXCEP_VECTOR_CPU_RESET_VECTOR	(NV_PA_EVP_BASE + 0x100)
 #define CSITE_CPU_DBG0_LAR		(NV_PA_CSITE_BASE + 0x10FB0)