ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode

This patch adds support for dynamic configuration of PCIe ports for the
AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
boards Yucca & Katmai and the 405EX board Kilauea.

This dynamic configuration is done via the "pcie_mode" environement
variable. This variable can be set to "EP" or "RP" for endpoint or
rootpoint mode. Multiple values can be joined via the ":" delimiter.
Here an example:

pcie_mode=RP:EP:EP

This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
as endpoint.

Per default Yucca will be configured as:
pcie_mode=RP:EP:EP

Per default Katmai will be configured as:
pcie_mode=RP:RP:REP

Per default Kilauea will be configured as:
pcie_mode=RP:RP

Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
Signed-off-by: Stefan Roese <sr@denx.de>

1 files changed, 36 insertions, 37 deletions

diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index c46721c9229..efdf814bf08 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -36,11 +36,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#undef PCIE_ENDPOINT
-/* #define PCIE_ENDPOINT 1 */
 
 void fpga_init (void);
-
 void get_sys_info(PPC440_SYS_INFO *board_cfg );
 int compare_to_true(char *str );
 char *remove_l_w_space(char *in_str );
@@ -847,6 +844,7 @@ void pcie_setup_hoses(int busno)
 {
 	struct pci_controller *hose;
 	int i, bus;
+	int ret = 0;
 	char *env;
 	unsigned int delay;
 
@@ -860,16 +858,19 @@ void pcie_setup_hoses(int busno)
 		if (!yucca_pcie_card_present(i))
 			continue;
 
-#ifdef PCIE_ENDPOINT
- 		yucca_setup_pcie_fpga_endpoint(i);
- 		if (ppc4xx_init_pcie_endport(i)) {
-#else
-		yucca_setup_pcie_fpga_rootpoint(i);
-		if (ppc4xx_init_pcie_rootport(i)) {
-#endif
-			printf("PCIE%d: initialization failed\n", i);
-			continue;
+		if (is_end_point(i)) {
+			printf("PCIE%d: will be configured as endpoint\n",i);
+			yucca_setup_pcie_fpga_endpoint(i);
+			ret = ppc4xx_init_pcie_endport(i);
+		} else {
+			printf("PCIE%d: will be configured as root-complex\n",i);
+			yucca_setup_pcie_fpga_rootpoint(i);
+			ret = ppc4xx_init_pcie_rootport(i);
 		}
+		if (ret) {
+ 			printf("PCIE%d: initialization failed\n", i);
+ 			continue;
+ 		}
 
 		hose = &pcie_hose[i];
 		hose->first_busno = bus;
@@ -881,35 +882,33 @@ void pcie_setup_hoses(int busno)
 			CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
 			CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
 			CFG_PCIE_MEMSIZE,
-			PCI_REGION_MEM
-			);
+			PCI_REGION_MEM);
 		hose->region_count = 1;
 		pci_register_hose(hose);
 
-#ifdef PCIE_ENDPOINT
-		ppc4xx_setup_pcie_endpoint(hose, i);
-		/*
-		 * Reson for no scanning is endpoint can not generate
-		 * upstream configuration accesses.
-		 */
-#else
-		ppc4xx_setup_pcie_rootpoint(hose, i);
-
-		env = getenv ("pciscandelay");
-		if (env != NULL) {
-			delay = simple_strtoul (env, NULL, 10);
-			if (delay > 5)
-				printf ("Warning, expect noticable delay before PCIe"
-					"scan due to 'pciscandelay' value!\n");
-			mdelay (delay * 1000);
-		}
+		if (is_end_point(i)) {
+			ppc4xx_setup_pcie_endpoint(hose, i);
+			/*
+			 * Reson for no scanning is endpoint can not generate
+			 * upstream configuration accesses.
+		 	 */
+		} else {
+			ppc4xx_setup_pcie_rootpoint(hose, i);
+			env = getenv("pciscandelay");
+			if (env != NULL) {
+				delay = simple_strtoul(env, NULL, 10);
+				if (delay > 5)
+				    	printf("Warning, expect noticable delay before "
+					       "PCIe scan due to 'pciscandelay' value!\n");
+				mdelay(delay * 1000);
+			}
 
-		/*
-		 * Config access can only go down stream
-		 */
-		hose->last_busno = pci_hose_scan(hose);
-		bus = hose->last_busno + 1;
-#endif
+			/*
+			 * Config access can only go down stream
+		 	 */
+			hose->last_busno = pci_hose_scan(hose);
+			bus = hose->last_busno + 1;
+		}
 	}
 }
 #endif	/* defined(CONFIG_PCI) */