* Code cleanup, mostly for GCC-3.3.x

* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
  pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
  additional ethernet addresses.

* Cleanup drivers/i82365.c - avoid duplication of code

* Fix bogus "cannot span across banks" flash error message

* Add support for CompactFlash for the CPC45 Board.

3 files changed, 109 insertions, 1 deletions

diff --git a/board/cpc45/Makefile b/board/cpc45/Makefile
index db5a83b70d7..ccb811bd4d1 100644
--- a/board/cpc45/Makefile
+++ b/board/cpc45/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o flash.o plx9030.o
+OBJS	= $(BOARD).o flash.o plx9030.o pd67290.o
 
 $(LIB):	.depend $(OBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c
index 92ccd42e7f7..51b0085911b 100644
--- a/board/cpc45/cpc45.c
+++ b/board/cpc45/cpc45.c
@@ -24,11 +24,13 @@
 #include <common.h>
 #include <mpc824x.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <pci.h>
 #include <i2c.h>
 
 int sysControlDisplay(int digit, uchar ascii_code);
 extern void Plx9030Init(void);
+extern void SPD67290Init(void);
 
 	/* We have to clear the initial data area here. Couldn't have done it
 	 * earlier because DRAM had not been initialized.
@@ -180,6 +182,10 @@ static struct pci_config_table pci_cpc45_config_table[] = {
 	  pci_cfgfunc_config_device, { PCI_PLX9030_IOADDR,
 				       PCI_PLX9030_MEMADDR,
 				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0E, PCI_ANY_ID,
+	  pci_cfgfunc_config_device, { PCMCIA_IO_BASE,
+				       PCMCIA_IO_BASE,
+				       PCI_COMMAND_MEMORY | PCI_COMMAND_IO }},
 #endif /*CONFIG_PCI_PNP*/
 	{ }
 };
@@ -233,3 +239,37 @@ int sysControlDisplay (int digit,	/* number of digit 0..7 */
 
 	return (0);
 }
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+
+#ifdef CFG_PCMCIA_MEM_ADDR
+volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR;
+#endif
+
+int pcmcia_init(void)
+{
+	u_int rc;
+
+	debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+	rc = i82365_init();
+
+	return rc;
+}
+
+#endif	/* CFG_CMD_PCMCIA */
+
+# ifdef CONFIG_IDE_LED
+void ide_led (uchar led, uchar status)
+{
+	u_char  val;
+	/* We have one PCMCIA slot and use LED H4 for the IDE Interface */
+	val = readb(BCSR_BASE + 0x04);
+	if (status) {				/* led on */
+		val |= B_CTRL_LED0;
+	} else {
+		val &= ~B_CTRL_LED0;
+	}
+	writeb(val, BCSR_BASE + 0x04);
+}
+# endif
diff --git a/board/cpc45/pd67290.c b/board/cpc45/pd67290.c
new file mode 100644
index 00000000000..c84fbae918e
--- /dev/null
+++ b/board/cpc45/pd67290.c
@@ -0,0 +1,68 @@
+/* pd67290.c - system configuration module for SPD67290
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * (C) 2004 DENX Software Engineering, Heiko Schocher <hs@denx.de>
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+
+/* imports */
+#include <mpc824x.h>
+
+static struct pci_device_id supported[] = {
+	{PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_6729},
+	{}
+};
+
+/***************************************************************************
+*
+* SPD67290Init -
+*
+* RETURNS: -1 on error, 0 if OK
+*/
+
+int SPD67290Init (void)
+{
+	pci_dev_t devno;
+	int idx = 0;		/* general index */
+	ulong membaseCsr;	/* base address of device memory space */
+
+	/* find PD67290 device */
+	if ((devno = pci_find_devices (supported, idx++)) < 0) {
+		printf ("No PD67290 device found !!\n");
+		return -1;
+	}
+	/* - 0xfe000000 see MPC 8245 Users Manual Adress Map B */
+	membaseCsr = PCMCIA_IO_BASE - 0xfe000000;
+
+	/* set base address */
+	pci_write_config_dword (devno, PCI_BASE_ADDRESS_0, membaseCsr);
+
+	/* enable mapped memory and IO addresses */
+	pci_write_config_dword (devno,
+				PCI_COMMAND,
+				PCI_COMMAND_MEMORY |
+				PCI_COMMAND_IO | PCI_COMMAND_WAIT);
+	return 0;
+}