ppc4xx: Big cleanup of PPC4xx defines

This patch cleans up multiple issues of the 4xx register (mostly
DCR, SDR, CPR, etc) definitions:

- Change lower case defines to upper case (plb4_acr -> PLB4_ACR)
- Change the defines to better match the names from the
  user's manuals (e.g. cprpllc -> CPR0_PLLC)
- Removal of some unused defines

Please test this patch intensive on your PPC4xx platform. Even though
I tried not to break anything and tested successfully on multiple
4xx AMCC platforms, testing on custom platforms is recommended.

Signed-off-by: Stefan Roese <sr@denx.de>

2 files changed, 34 insertions, 34 deletions

diff --git a/board/csb272/csb272.c b/board/csb272/csb272.c
index 11596d2b7e9..cb24cd4ffeb 100644
--- a/board/csb272/csb272.c
+++ b/board/csb272/csb272.c
@@ -95,7 +95,7 @@ int board_early_init_f(void)
 	mtdcr (uicvcr, 0x00000001);  /* set vect base=0,INT0 highest priority */
 	mtdcr (uicsr, 0xFFFFFFFF);   /* clear all ints */
 
-	mtebc (epcr, 0xa8400000);   /* EBC always driven */
+	mtebc (EBC0_CFG, 0xa8400000);   /* EBC always driven */
 
 	return 0; /* success */
 }
@@ -135,29 +135,29 @@ phys_size_t initdram (int board_type)
 
 	tot_size = 0;
 
-	mtdcr (memcfga, mem_mb0cf);
-	tmp = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+	tmp = mfdcr (SDRAM0_CFGDATA);
 	if (tmp & 0x00000001) {
 		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
 		tot_size += bank_size;
 	}
 
-	mtdcr (memcfga, mem_mb1cf);
-	tmp = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+	tmp = mfdcr (SDRAM0_CFGDATA);
 	if (tmp & 0x00000001) {
 		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
 		tot_size += bank_size;
 	}
 
-	mtdcr (memcfga, mem_mb2cf);
-	tmp = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb2cf);
+	tmp = mfdcr (SDRAM0_CFGDATA);
 	if (tmp & 0x00000001) {
 		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
 		tot_size += bank_size;
 	}
 
-	mtdcr (memcfga, mem_mb3cf);
-	tmp = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb3cf);
+	tmp = mfdcr (SDRAM0_CFGDATA);
 	if (tmp & 0x00000001) {
 		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
 		tot_size += bank_size;
diff --git a/board/csb272/init.S b/board/csb272/init.S
index 1cfef376a69..15b26f8bf86 100644
--- a/board/csb272/init.S
+++ b/board/csb272/init.S
@@ -38,17 +38,17 @@
 
 #define WDCR_EBC(reg,val) \
 	addi    r4,0,reg;\
-	mtdcr   ebccfga,r4;\
+	mtdcr   EBC0_CFGADDR,r4;\
 	addis   r4,0,val@h;\
 	ori     r4,r4,val@l;\
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
 #define WDCR_SDRAM(reg,val) \
 	addi    r4,0,reg;\
-	mtdcr   memcfga,r4;\
+	mtdcr   SDRAM0_CFGADDR,r4;\
 	addis   r4,0,val@h;\
 	ori     r4,r4,val@l;\
-	mtdcr   memcfgd,r4
+	mtdcr   SDRAM0_CFGDATA,r4
 
 /******************************************************************************
  * Function:	ext_bus_cntlr_init
@@ -106,51 +106,51 @@ ext_bus_cntlr_init:
 	 * SETUP CPC0_CR0
 	 *******************************************************************/
 	LI32(r4, 0x007000c0)
-	mtdcr	cntrl0, r4
+	mtdcr	CPC0_CR0, r4
 
 	/********************************************************************
 	 * Setup CPC0_CR1: Change PCIINT signal to PerWE
 	 *******************************************************************/
-	mfdcr	r4, cntrl1
+	mfdcr	r4, CPC0_CR1
 	ori	r4, r4, 0x4000
-	mtdcr	cntrl1, r4
+	mtdcr	CPC0_CR1, r4
 
 	/********************************************************************
 	 * Setup External Bus Controller (EBC).
 	 *******************************************************************/
-	WDCR_EBC(epcr, 0xd84c0000)
+	WDCR_EBC(EBC0_CFG, 0xd84c0000)
 	/********************************************************************
 	 * Memory Bank 0 (Intel 28F128J3 Flash) initialization
 	 *******************************************************************/
-	/*WDCR_EBC(pb0ap, 0x02869200)*/
-	WDCR_EBC(pb0ap, 0x07869200)
-	WDCR_EBC(pb0cr, 0xfe0bc000)
+	/*WDCR_EBC(PB1AP, 0x02869200)*/
+	WDCR_EBC(PB1AP, 0x07869200)
+	WDCR_EBC(PB0CR, 0xfe0bc000)
 	/********************************************************************
 	 * Memory Bank 1 (Holtek HT6542B PS/2) initialization
 	 *******************************************************************/
-	WDCR_EBC(pb1ap, 0x1f869200)
-	WDCR_EBC(pb1cr, 0xf0818000)
+	WDCR_EBC(PB1AP, 0x1f869200)
+	WDCR_EBC(PB1CR, 0xf0818000)
 	/********************************************************************
 	 * Memory Bank 2 (Epson S1D13506) initialization
 	 *******************************************************************/
-	WDCR_EBC(pb2ap, 0x05860300)
-	WDCR_EBC(pb2cr, 0xf045a000)
+	WDCR_EBC(PB2AP, 0x05860300)
+	WDCR_EBC(PB2CR, 0xf045a000)
 	/********************************************************************
 	 * Memory Bank 3 (Philips SJA1000 CAN Controllers) initialization
 	 *******************************************************************/
-	WDCR_EBC(pb3ap, 0x0387d200)
-	WDCR_EBC(pb3cr, 0xf021c000)
+	WDCR_EBC(PB3AP, 0x0387d200)
+	WDCR_EBC(PB3CR, 0xf021c000)
 	/********************************************************************
 	 * Memory Bank 4-7 (Unused) initialization
 	 *******************************************************************/
-	WDCR_EBC(pb4ap, 0)
-	WDCR_EBC(pb4cr, 0)
-	WDCR_EBC(pb5ap, 0)
-	WDCR_EBC(pb5cr, 0)
-	WDCR_EBC(pb6ap, 0)
-	WDCR_EBC(pb6cr, 0)
-	WDCR_EBC(pb7ap, 0)
-	WDCR_EBC(pb7cr, 0)
+	WDCR_EBC(PB4AP, 0)
+	WDCR_EBC(PB4CR, 0)
+	WDCR_EBC(PB5AP, 0)
+	WDCR_EBC(PB5CR, 0)
+	WDCR_EBC(PB6AP, 0)
+	WDCR_EBC(PB6CR, 0)
+	WDCR_EBC(PB7AP, 0)
+	WDCR_EBC(PB7CR, 0)
 
 	/* We are all done */
 	mtlr	r0			/* Restore link register */