* Patches by Reinhard Meyer, 14 Feb 2004:

  - update board/emk tree; use common flash driver
  - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
    [adapted for other PPC CPUs -- wd]
  - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c

* Patch by Jon Diekema, 13 Feb 2004:
  Call show_boot_progress() whenever POST "FAILED" is printed.

* Patch by Nishant Kamat, 13 Feb 2004:
  Add support for TI OMAP1610 H2 Board
  Fixes for cpu/arm926ejs/interrupt.c
       (based on Richard Woodruff's patch for arm925, 16 Oct 03)
  Fix for a timer bug in OMAP1610 Innovator
  Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2

* Patches by Stephan Linz, 12 Feb 2004:
  - add support for NIOS timer with variable period preload counter value
  - prepare POST framework support for NIOS targets

* Patch by Denis Peter, 11 Feb 2004:
  add POST support for the MIP405 board

7 files changed, 74 insertions, 1099 deletions

diff --git a/board/emk/common/flash.c b/board/emk/common/flash.c
index b2a21382e52..adfa9a0fb27 100644
--- a/board/emk/common/flash.c
+++ b/board/emk/common/flash.c
@@ -28,15 +28,33 @@
 
 flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
-typedef unsigned char FLASH_PORT_WIDTH;
-typedef volatile unsigned char FLASH_PORT_WIDTHV;
-#define	FLASH_ID_MASK	0xFF
+#if defined (CONFIG_TOP860)
+  typedef unsigned short FLASH_PORT_WIDTH;
+  typedef volatile unsigned short FLASH_PORT_WIDTHV;
+  #define	FLASH_ID_MASK	0xFF
+
+  #define FPW	FLASH_PORT_WIDTH
+  #define FPWV	FLASH_PORT_WIDTHV
+
+  #define FLASH_CYCLE1	0x0555
+  #define FLASH_CYCLE2	0x02aa
+  #define FLASH_ID1		0
+  #define FLASH_ID2		1
+#endif
+
+#if defined (CONFIG_TOP5200)
+  typedef unsigned char FLASH_PORT_WIDTH;
+  typedef volatile unsigned char FLASH_PORT_WIDTHV;
+  #define	FLASH_ID_MASK	0xFF
 
-#define FPW	FLASH_PORT_WIDTH
-#define FPWV	FLASH_PORT_WIDTHV
+  #define FPW	FLASH_PORT_WIDTH
+  #define FPWV	FLASH_PORT_WIDTHV
 
-#define FLASH_CYCLE1	0x0aaa
-#define FLASH_CYCLE2	0x0555
+  #define FLASH_CYCLE1	0x0aaa
+  #define FLASH_CYCLE2	0x0555
+  #define FLASH_ID1		0
+  #define FLASH_ID2		2
+#endif
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -179,12 +197,33 @@ void flash_print_info (flash_info_t *info)
 	printf ("  Sector Start Addresses:");
 
 	for (i=0; i<info->sector_count; ++i) {
+		ulong	size;
+		int		erased;
+		ulong	*flash = (unsigned long *) info->start[i];
+
 		if ((i % 5) == 0) {
 			printf ("\n   ");
 		}
 
-		printf (" %08lX%s", info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
+		/*
+		 * Check if whole sector is erased
+		 */
+		size =
+			(i != (info->sector_count - 1)) ?
+			(info->start[i + 1] - info->start[i]) >> 2 :
+		(info->start[0] + info->size - info->start[i]) >> 2;
+
+		for (
+			flash = (unsigned long *) info->start[i], erased = 1;
+				(flash != (unsigned long *) info->start[i] + size) && erased;
+					flash++
+			)
+			erased = *flash == ~0x0UL;
+
+		printf (" %08lX %s %s",
+			info->start[i],
+			erased ? "E": " ",
+			info->protect[i] ? "(RO)" : "    ");
 	}
 
 	printf ("\n");
@@ -212,7 +251,7 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info)
 	 * This works for any bus width and any FLASH device width.
 	 */
 	udelay(100);
-	switch (addr[0] & 0xff) {
+	switch (addr[FLASH_ID1] & 0xff) {
 
 	case (uchar)AMD_MANUFACT:
 		info->flash_id = FLASH_MAN_AMD;
@@ -225,7 +264,7 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info)
 #endif
 
 	default:
-		printf ("unknown vendor=%x ", addr[0] & 0xff);
+		printf ("unknown vendor=%x ", addr[FLASH_ID1] & 0xff);
 		info->flash_id = FLASH_UNKNOWN;
 		info->sector_count = 0;
 		info->size = 0;
@@ -233,7 +272,7 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info)
 	}
 
 	/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
-	if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[2]) {
+	if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[FLASH_ID2]) {
 
 	case (FPW)AMD_ID_LV160B:
 		info->flash_id += FLASH_AM160B;
@@ -255,7 +294,7 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info)
 		break;
 
 	default:
-		printf ("unknown AMD device=%x ", (FPW)addr[2]);
+		printf ("unknown AMD device=%x ", (FPW)addr[FLASH_ID2]);
 		info->flash_id = FLASH_UNKNOWN;
 		info->sector_count = 0;
 		info->size = 0;
diff --git a/board/emk/top5200/Makefile b/board/emk/top5200/Makefile
index eb5ed591a97..986608bb111 100644
--- a/board/emk/top5200/Makefile
+++ b/board/emk/top5200/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	:= $(BOARD).o flash.o
+OBJS	:= $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/emk/top5200/flash.c b/board/emk/top5200/flash.c
deleted file mode 100644
index 216bce3a884..00000000000
--- a/board/emk/top5200/flash.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2003
- * Reinhard Meyer, EMK Elektronik GmbH, r.meyer@emk-elektronik.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-typedef unsigned char FLASH_PORT_WIDTH;
-typedef volatile unsigned char FLASH_PORT_WIDTHV;
-#define	FLASH_ID_MASK	0xFF
-
-#define FPW	FLASH_PORT_WIDTH
-#define FPWV	FLASH_PORT_WIDTHV
-
-#define FLASH_CYCLE1	0x0aaa
-#define FLASH_CYCLE2	0x0555
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(FPWV *addr, flash_info_t *info);
-static void flash_reset(flash_info_t *info);
-static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
-static flash_info_t *flash_get_info(ulong base);
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-unsigned long flash_init (void)
-{
-	unsigned long size = 0;
-	int i = 0;
-	extern void flash_preinit(void);
-	extern void flash_afterinit(uint, ulong, ulong);
-	ulong flashbase = CFG_FLASH_BASE;
-
-	flash_preinit();
-
-	/* There is only ONE FLASH device */
-	memset(&flash_info[i], 0, sizeof(flash_info_t));
-	flash_info[i].size =
-			flash_get_size((FPW *)flashbase, &flash_info[i]);
-	size += flash_info[i].size;
-
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
-		      flash_get_info(CFG_MONITOR_BASE));
-#endif
-
-#ifdef	CFG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
-		      flash_get_info(CFG_ENV_ADDR));
-#endif
-
-
-	flash_afterinit(i, flash_info[i].start[0], flash_info[i].size);
-	return size ? size : 1;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_reset(flash_info_t *info)
-{
-	FPWV *base = (FPWV *)(info->start[0]);
-
-	/* Put FLASH back in read mode */
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
-		*base = (FPW)0x00FF00FF;	/* Intel Read Mode */
-	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
-		*base = (FPW)0x00F000F0;	/* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-
-static flash_info_t *flash_get_info(ulong base)
-{
-	int i;
-	flash_info_t * info;
-
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
-		info = & flash_info[i];
-		if (info->size &&
-			info->start[0] <= base && base <= info->start[0] + info->size - 1)
-			break;
-	}
-
-	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t *info)
-{
-	int i;
-	uchar *boottype;
-	uchar *bootletter;
-	uchar *fmt;
-	uchar botbootletter[] = "B";
-	uchar topbootletter[] = "T";
-	uchar botboottype[] = "bottom boot sector";
-	uchar topboottype[] = "top boot sector";
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-#if 0
-	case FLASH_MAN_BM:	printf ("BRIGHT MICRO ");	break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_SST:	printf ("SST ");		break;
-	case FLASH_MAN_STM:	printf ("STM ");		break;
-	case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
-#endif
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	/* check for top or bottom boot, if it applies */
-	if (info->flash_id & FLASH_BTYPE) {
-		boottype = botboottype;
-		bootletter = botbootletter;
-	}
-	else {
-		boottype = topboottype;
-		bootletter = topbootletter;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM160T:
-	case FLASH_AM160B:
-		fmt = "29LV160%s (16 Mbit, %s)\n";
-		break;
-	case FLASH_AMDLV065D:
-		fmt = "29LV065 (64 Mbit, uniform sectors)\n";
-		break;
-	default:
-		fmt = "Unknown Chip Type\n";
-		break;
-	}
-
-	printf (fmt, bootletter, boottype);
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20,
-		info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0) {
-			printf ("\n   ");
-		}
-
-		printf (" %08lX%s", info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-
-	printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size (FPWV *addr, flash_info_t *info)
-{
-	int		i;
-	ulong	offset;
-
-	/* Write auto select command: read Manufacturer ID */
-	/* Write auto select command sequence and test FLASH answer */
-	addr[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* for AMD, Intel ignores this */
-	addr[FLASH_CYCLE2] = (FPW)0x00550055;	/* for AMD, Intel ignores this */
-	addr[FLASH_CYCLE1] = (FPW)0x00900090;	/* selects Intel or AMD */
-
-	/* The manufacturer codes are only 1 byte, so just use 1 byte.
-	 * This works for any bus width and any FLASH device width.
-	 */
-	udelay(100);
-	switch (addr[0] & 0xff) {
-
-	case (uchar)AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-
-#if 0
-	case (uchar)INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-#endif
-
-	default:
-		printf ("unknown vendor=%x ", addr[0] & 0xff);
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		break;
-	}
-
-	/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
-	if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[2]) {
-
-	case (FPW)AMD_ID_LV160B:
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-#ifdef CFG_LOWBOOT
-		offset = 0;
-#else
-		offset = 0x00e00000;
-#endif
-		info->start[0] = (ulong)addr + offset;
-		info->start[1] = (ulong)addr + offset + 0x4000;
-		info->start[2] = (ulong)addr + offset + 0x6000;
-		info->start[3] = (ulong)addr + offset + 0x8000;
-		for (i = 4; i < info->sector_count; i++)
-		{
-			info->start[i] = (ulong)addr + offset + 0x10000 * (i-3);
-		}
-		break;
-
-	case (FPW)AMD_ID_LV065D:
-		info->flash_id += FLASH_AMDLV065D;
-		info->sector_count = 128;
-		info->size = 0x00800000;
-#ifdef CFG_LOWBOOT
-		offset = 0;
-#else
-		offset = 0x00800000;
-#endif
-		for( i = 0; i < info->sector_count; i++ )
-			info->start[i] = (ulong)addr + offset + (i * 0x10000);
-		break;				/* => 8 or 16 MB	*/
-
-	default:
-		printf ("unknown AMD device=%x ", (FPW)addr[2]);
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* => no or unknown flash */
-	}
-
-	/* Put FLASH back in read mode */
-	flash_reset(info);
-
-	return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	FPWV *addr;
-	int flag, prot, sect;
-	int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
-	ulong start, now, last;
-	int rcode = 0;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AMDLV065D:
-		break;
-	case FLASH_UNKNOWN:
-	default:
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	last  = get_timer(0);
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last && rcode == 0; sect++) {
-
-		if (info->protect[sect] != 0)	/* protected, skip it */
-			continue;
-
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-		addr = (FPWV *)(info->start[sect]);
-		if (intel) {
-			*addr = (FPW)0x00500050; /* clear status register */
-			*addr = (FPW)0x00200020; /* erase setup */
-			*addr = (FPW)0x00D000D0; /* erase confirm */
-		}
-		else {
-			/* must be AMD style if not Intel */
-			FPWV *base;		/* first address in bank */
-
-			base = (FPWV *)(info->start[0]);
-			base[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* unlock */
-			base[FLASH_CYCLE2] = (FPW)0x00550055;	/* unlock */
-			base[FLASH_CYCLE1] = (FPW)0x00800080;	/* erase mode */
-			base[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* unlock */
-			base[FLASH_CYCLE2] = (FPW)0x00550055;	/* unlock */
-			*addr = (FPW)0x00300030;	/* erase sector */
-		}
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		start = get_timer(0);
-
-		/* wait at least 50us for AMD, 80us for Intel.
-		 * Let's wait 1 ms.
-		 */
-		udelay (1000);
-
-		while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
-			if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
-				printf ("Timeout\n");
-
-				if (intel) {
-					/* suspend erase	*/
-					*addr = (FPW)0x00B000B0;
-				}
-
-				flash_reset(info);	/* reset to read mode */
-				rcode = 1;		/* failed */
-				break;
-			}
-
-			/* show that we're waiting */
-			if ((get_timer(last)) > CFG_HZ) {/* every second */
-				putc ('.');
-				last = get_timer(0);
-			}
-		}
-
-		/* show that we're waiting */
-		if ((get_timer(last)) > CFG_HZ) {	/* every second */
-			putc ('.');
-			last = get_timer(0);
-		}
-
-		flash_reset(info);	/* reset to read mode	*/
-	}
-
-	printf (" done\n");
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
-	int bytes;	  /* number of bytes to program in current word		*/
-	int left;	  /* number of bytes left to program			*/
-	int i, res;
-
-	for (left = cnt, res = 0;
-		 left > 0 && res == 0;
-		 addr += sizeof(data), left -= sizeof(data) - bytes) {
-
-		bytes = addr & (sizeof(data) - 1);
-		addr &= ~(sizeof(data) - 1);
-
-		/* combine source and destination data so can program
-		 * an entire word of 16 or 32 bits
-		 */
-		for (i = 0; i < sizeof(data); i++) {
-			data <<= 8;
-			if (i < bytes || i - bytes >= left )
-				data += *((uchar *)addr + i);
-			else
-				data += *src++;
-		}
-
-		/* write one word to the flash */
-		switch (info->flash_id & FLASH_VENDMASK) {
-		case FLASH_MAN_AMD:
-			res = write_word_amd(info, (FPWV *)addr, data);
-			break;
-		default:
-			/* unknown flash type, error! */
-			printf ("missing or unknown FLASH type\n");
-			res = 1;	/* not really a timeout, but gives error */
-			break;
-		}
-	}
-
-	return (res);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
-{
-	ulong start;
-	int flag;
-	int res = 0;	/* result, assume success	*/
-	FPWV *base;		/* first address in flash bank	*/
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*dest & data) != data) {
-		return (2);
-	}
-
-
-	base = (FPWV *)(info->start[0]);
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	base[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* unlock */
-	base[FLASH_CYCLE2] = (FPW)0x00550055;	/* unlock */
-	base[FLASH_CYCLE1] = (FPW)0x00A000A0;	/* selects program mode */
-
-	*dest = data;		/* start programming the data	*/
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	start = get_timer (0);
-
-	/* data polling for D7 */
-	while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
-			*dest = (FPW)0x00F000F0;	/* reset bank */
-			res = 1;
-		}
-	}
-
-	return (res);
-}
diff --git a/board/emk/top5200/top5200.c b/board/emk/top5200/top5200.c
index 3969e2aa12a..b65d2d0d0d2 100644
--- a/board/emk/top5200/top5200.c
+++ b/board/emk/top5200/top5200.c
@@ -156,53 +156,9 @@ void flash_afterinit(uint bank, ulong start, ulong size)
 int misc_init_r (void)
 {
 	/* read 'factory' part of EEPROM */
-	uchar buf[81];
-	uchar *p;
-	uint length;
-	uint addr;
-	uint len;
-
-	/* get length first */
-	addr = CFG_FACT_OFFSET;
-	if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, 2)) {
-bailout:
-		printf ("cannot read factory configuration\n");
-		printf ("be sure to set ethaddr	yourself!\n");
-		return 0;
-	}
-	length = buf[0] + (buf[1] << 8);
-	addr += 2;
-
-	/* sanity check */
-	if (length < 20 || length > CFG_FACT_SIZE - 2)
-		goto bailout;
-
-	/* read lines */
-	while (length > 0) {
-		/* read one line */
-		len = length > 80 ? 80 : length;
-		if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, len))
-			goto bailout;
-		/* mark end of buffer */
-		buf[len] = 0;
-		/* search end of line */
-		for (p = buf; *p && *p != 0x0a; p++);
-		if (!*p)
-			goto bailout;
-		*p++ = 0;
-		/* advance to next line start */
-		length -= p - buf;
-		addr += p - buf;
-		/*printf ("%s\n", buf); */
-		/* search for our specific entry */
-		if (!strncmp ((char *) buf, "[RLA/lan/Ethernet] ", 19)) {
-			setenv ("ethaddr", buf + 19);
-		} else if (!strncmp ((char *) buf, "[BOARD/SERIAL] ", 15)) {
-			setenv ("serial#", buf + 15);
-		} else if (!strncmp ((char *) buf, "[BOARD/TYPE] ", 13)) {
-			setenv ("board_id", buf + 13);
-		}
-	}
+	extern void read_factory_r (void);
+	read_factory_r ();
+
 	return (0);
 }
 
diff --git a/board/emk/top860/Makefile b/board/emk/top860/Makefile
index 13ce9fc9d28..a74dd2fa2be 100644
--- a/board/emk/top860/Makefile
+++ b/board/emk/top860/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o flash.o
+OBJS	= $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o
 
 $(LIB):	.depend $(OBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/emk/top860/flash.c b/board/emk/top860/flash.c
deleted file mode 100644
index 0f827df06da..00000000000
--- a/board/emk/top860/flash.c
+++ /dev/null
@@ -1,489 +0,0 @@
-/*
- * (C) Copyright 2003
- * EMK Elektronik GmbH <www.emk-elektronik.de>
- * Reinhard Meyer <r.meyer@emk-elektronik.de>
- *
- * copied from the BMW Port - seems that its similiar enough
- * to be easily adaped ;) --- Well, it turned out to become a
- * merger between parts of the EMKstax Flash routines and the
- * BMW funtion frames...
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-#define	FLASH_WORD_SIZE		unsigned short
-#define FLASH_WORD_WIDTH	(sizeof (FLASH_WORD_SIZE))
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips    */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-
-
-/*****************************************************************************
- * software product ID entry/exit
- *****************************************************************************/
-static void FlashProductIdMode (
-	volatile FLASH_WORD_SIZE *b,
-	int on_off)
-{
-	b[0x5555] = 0xaa;
-	b[0x2aaa] = 0x55;
-	b[0x5555] = on_off ? 0x90 : 0xf0;
-}
-
-/*****************************************************************************
- * sector erase start
- *****************************************************************************/
-static void FlashSectorErase (
-	volatile FLASH_WORD_SIZE *b,
-	volatile FLASH_WORD_SIZE *a)
-{
-	b[0x5555] = 0xaa;
-	b[0x2aaa] = 0x55;
-	b[0x5555] = 0x80;
-	b[0x5555] = 0xaa;
-	b[0x2aaa] = 0x55;
-	a[0] = 0x30;
-}
-
-/*****************************************************************************
- * program a word
- *****************************************************************************/
-static void FlashProgWord (
-	volatile FLASH_WORD_SIZE *b,
-	volatile FLASH_WORD_SIZE *a,
-	FLASH_WORD_SIZE v)
-{
-	b[0x5555] = 0xaa;
-	b[0x2aaa] = 0x55;
-	b[0x5555] = 0xa0;
-	a[0] = v;
-}
-
-/*****************************************************************************
- * reset bank, back to read mode
- *****************************************************************************/
-static void FlashReset (volatile FLASH_WORD_SIZE *b)
-{
-	b[0] = 0xf0;
-}
-
-/*****************************************************************************
- * identify FLASH chip
- * this code is a stripped version of the FlashGetType() function in EMKstax
- *****************************************************************************/
-unsigned long flash_init (void)
-{
-	volatile FLASH_WORD_SIZE * const flash = (volatile FLASH_WORD_SIZE *) CFG_FLASH_BASE;
-	FLASH_WORD_SIZE	manu, dev;
-	flash_info_t * const pflinfo = &flash_info[0];
-	int j;
-
-	/* get Id Bytes */
-	FlashProductIdMode (flash, 1);
-	manu = flash[0];
-	dev  = flash[1];
-	FlashProductIdMode (flash, 0);
-
-	pflinfo->size = 0;
-	pflinfo->sector_count = 0;
-	pflinfo->flash_id = 0xffffffff;
-	pflinfo->portwidth = FLASH_CFI_16BIT;
-	pflinfo->chipwidth = FLASH_CFI_BY16;
-
-	switch (manu&0xff)
-	{
-	case 0x01:	/* AMD */
-		pflinfo->flash_id = FLASH_MAN_AMD;
-		switch (dev&0xff)
-		{
-		case 0x49:
-			pflinfo->size = 0x00200000;
-			pflinfo->sector_count = 35;
-			pflinfo->flash_id |= FLASH_AM160B;
-			pflinfo->start[0] = CFG_FLASH_BASE;
-			pflinfo->start[1] = CFG_FLASH_BASE + 0x4000;
-			pflinfo->start[2] = CFG_FLASH_BASE + 0x6000;
-			pflinfo->start[3] = CFG_FLASH_BASE + 0x8000;
-			for (j = 4; j < 35; j++)
-			{
-				pflinfo->start[j] = CFG_FLASH_BASE + 0x00010000 * (j-3);
-			}
-			break;
-
-		case 0xf9:
-			pflinfo->size = 0x00400000;
-			pflinfo->sector_count = 71;
-			pflinfo->flash_id |= FLASH_AM320B;
-			pflinfo->start[0] = CFG_FLASH_BASE;
-			pflinfo->start[1] = CFG_FLASH_BASE + 0x4000;
-			pflinfo->start[2] = CFG_FLASH_BASE + 0x6000;
-			pflinfo->start[3] = CFG_FLASH_BASE + 0x8000;
-			for (j = 0; j < 8; j++)
-			{
-				pflinfo->start[j] = CFG_FLASH_BASE + 0x00002000 * (j);
-			}
-			for (j = 8; j < 71; j++)
-			{
-				pflinfo->start[j] = CFG_FLASH_BASE + 0x00010000 * (j-7);
-			}
-			break;
-
-		default:
-			printf ("unknown AMD dev=%x ", dev);
-			pflinfo->flash_id |= FLASH_UNKNOWN;
-		}
-		break;
-
-	default:
-		printf ("unknown manu=%x ", manu);
-	}
-	return pflinfo->size;
-}
-
-/*****************************************************************************
- * print info about a FLASH
- *****************************************************************************/
-void flash_print_info (flash_info_t *info)
-{
-	static const char	unk[] = "Unknown";
-	unsigned int		i;
-	const char			*mfct=unk,
-						*type=unk;
-
-	if(info->flash_id != FLASH_UNKNOWN)
-	{
-		switch (info->flash_id & FLASH_VENDMASK)
-		{
-		case FLASH_MAN_AMD:
-			mfct = "AMD";
-			break;
-		}
-
-		switch (info->flash_id & FLASH_TYPEMASK)
-		{
-		case FLASH_AM160B:
-			type = "AM29LV160B (16 Mbit, bottom boot sect)";
-			break;
-		case FLASH_AM320B:
-			type = "AM29LV320B (32 Mbit, bottom boot sect)";
-			break;
-		}
-	}
-
-	printf (
-		"\n  Brand: %s Type: %s\n"
-		"  Size: %lu KB in %d Sectors\n",
-		mfct,
-		type,
-		info->size >> 10,
-		info->sector_count
-		);
-
-	printf ("  Sector Start Addresses:");
-
-	for (i = 0; i < info->sector_count; i++)
-	{
-		unsigned long	size;
-		unsigned int	erased;
-		unsigned long	*flash = (unsigned long *) info->start[i];
-
-		/*
-		 * Check if whole sector is erased
-		 */
-		size =
-			(i != (info->sector_count - 1)) ?
-			(info->start[i + 1] - info->start[i]) >> 2 :
-		(info->start[0] + info->size - info->start[i]) >> 2;
-
-		for (
-			flash = (unsigned long *) info->start[i], erased = 1;
-				(flash != (unsigned long *) info->start[i] + size) && erased;
-					flash++
-			)
-			erased = *flash == ~0x0UL;
-
-		printf (
-			"%s %08lX %s %s",
-			(i % 5) ? "" : "\n   ",
-			info->start[i],
-			erased ? "E" : " ",
-			info->protect[i] ? "RO" : "  "
-			);
-	}
-
-	puts ("\n");
-	return;
-}
-
-/*****************************************************************************
- * erase one or more sectors
- *****************************************************************************/
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	volatile FLASH_WORD_SIZE	*addr = (FLASH_WORD_SIZE *)(info->start[0]);
-	int							flag,
-								prot,
-								sect,
-								l_sect;
-	ulong						start,
-								now,
-								last;
-
-	if ((s_first < 0) || (s_first > s_last))
-	{
-		if (info->flash_id == FLASH_UNKNOWN)
-		{
-			printf ("- missing\n");
-		}
-		else
-		{
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-		(info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP)))
-	{
-		printf ("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect)
-	{
-		if (info->protect[sect])
-		{
-			prot++;
-		}
-	}
-
-	if (prot)
-	{
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	}
-	else
-	{
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++)
-	{
-		if (info->protect[sect] == 0)
-		{ /* not protected */
-			FlashSectorErase ((FLASH_WORD_SIZE *)info->start[0], (FLASH_WORD_SIZE *)info->start[sect]);
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	* We wait for the last triggered sector
-	*/
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last  = start;
-	addr = (FLASH_WORD_SIZE *)info->start[l_sect];
-	while ((addr[0] & 0x0080) != 0x0080)
-	{
-		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT)
-		{
-			printf ("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000)
-		{  /* every second */
-			serial_putc ('.');
-			last = now;
-		}
-	}
-
-	DONE:
-	/* reset to read mode */
-	FlashReset ((FLASH_WORD_SIZE *)info->start[0]);
-
-	printf (" done\n");
-	return 0;
-}
-
-/*****************************************************************************
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- *****************************************************************************/
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong		cp,
-				wp,
-				data;
-	int			i,
-				l,
-				rc;
-
-	wp = (addr & ~(FLASH_WORD_WIDTH-1));   /* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes, if there are...
-	 */
-	if ((l = addr - wp) != 0)
-	{
-		data = 0;
-
-		/* get the current before the new data into our data word */
-		for (i=0, cp=wp; i<l; ++i, ++cp)
-		{
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		/* now merge the to be programmed values */
-		for (; i<4 && cnt>0; ++i, ++cp, --cnt)
-		{
-			data = (data << 8) | *src++;
-		}
-
-		/* get the current after the new data into our data word */
-		for (; cnt==0 && i<FLASH_WORD_WIDTH; ++i, ++cp)
-		{
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		/* now write the combined word */
-		if ((rc = write_word (info, wp, data)) != 0)
-		{
-			return (rc);
-		}
-		wp += FLASH_WORD_WIDTH;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= FLASH_WORD_WIDTH)
-	{
-		data = 0;
-		for (i=0; i<FLASH_WORD_WIDTH; ++i)
-		{
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word (info, wp, data)) != 0)
-		{
-			return (rc);
-		}
-		wp  += FLASH_WORD_WIDTH;
-		cnt -= FLASH_WORD_WIDTH;
-	}
-
-	if (cnt == 0)
-	{
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes, if there are...
-	 */
-	data = 0;
-
-	/* now merge the to be programmed values */
-	for (i=0, cp=wp; i<FLASH_WORD_WIDTH && cnt>0; ++i, ++cp)
-	{
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-
-	/* get the current after the new data into our data word */
-	for (; i<FLASH_WORD_WIDTH; ++i, ++cp)
-	{
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	/* now write the combined word */
-	return (write_word (info, wp, data));
-}
-
-/*****************************************************************************
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- *****************************************************************************/
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	volatile FLASH_WORD_SIZE	*addr2 = (FLASH_WORD_SIZE *)info->start[0];
-	volatile FLASH_WORD_SIZE	*dest2 = (FLASH_WORD_SIZE *)dest;
-	FLASH_WORD_SIZE				data2 = data;
-	ulong						start;
-	int							flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*dest2 & data2) != data2)
-	{
-		return (2);
-	}
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	FlashProgWord (addr2, dest2, data2);
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts ();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-	while ((*dest2 & 0x0080) != (data2 & 0x0080))
-	{
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT)
-		{
-			return (1);
-		}
-	}
-
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/emk/top860/top860.c b/board/emk/top860/top860.c
index d13be98e9eb..931c0d1b675 100644
--- a/board/emk/top860/top860.c
+++ b/board/emk/top860/top860.c
@@ -120,58 +120,29 @@ long int initdram (int board_type)
 }
 
 /*****************************************************************************
+ * prepare for FLASH detection
+ *****************************************************************************/
+void flash_preinit(void)
+{
+}
+
+/*****************************************************************************
+ * finalize FLASH setup
+ *****************************************************************************/
+void flash_afterinit(uint bank, ulong start, ulong size)
+{
+}
+
+/*****************************************************************************
  * otherinits after RAM is there and we are relocated to RAM
  * note: though this is an int function, nobody cares for the result!
  *****************************************************************************/
 int misc_init_r (void)
 {
 	/* read 'factory' part of EEPROM */
-	uchar buf[81];
-	uchar *p;
-	uint length;
-	uint addr;
-	uint len;
-
-	/* get length first */
-	addr = CFG_FACT_OFFSET;
-	if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, 2)) {
-	  bailout:
-		printf ("cannot read factory configuration\n");
-		printf ("be sure to set ethaddr	yourself!\n");
-		return 0;
-	}
-	length = buf[0] + (buf[1] << 8);
-	addr += 2;
+	extern void read_factory_r (void);
+	read_factory_r ();
 
-	/* sanity check */
-	if (length < 20 || length > CFG_FACT_SIZE - 2)
-		goto bailout;
-
-	/* read lines */
-	while (length > 0) {
-		/* read one line */
-		len = length > 80 ? 80 : length;
-		if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, len))
-			goto bailout;
-		/* mark end of buffer */
-		buf[len] = 0;
-		/* search end of line */
-		for (p = buf; *p && *p != 0x0a; p++);
-		if (!*p)
-			goto bailout;
-		*p++ = 0;
-		/* advance to next line start */
-		length -= p - buf;
-		addr += p - buf;
-		/*printf ("%s\n", buf); */
-		/* search for our specific entry */
-		if (!strncmp ((char *) buf, "[RLA/lan/Ethernet] ", 19)) {
-			setenv ("ethaddr", buf + 19);
-		} else if (!strncmp ((char *) buf, "[BOARD/SERIAL] ", 15)) {
-			setenv ("serial#", buf + 15);
-		} else if (!strncmp ((char *) buf, "[BOARD/TYPE] ", 13)) {
-			setenv ("board_id", buf + 13);
-		}
-	}
 	return (0);
 }
+