Initial revision

6 files changed, 1405 insertions, 0 deletions

diff --git a/board/esd/common/fpga.c b/board/esd/common/fpga.c
new file mode 100644
index 00000000000..666b4908e0f
--- /dev/null
+++ b/board/esd/common/fpga.c
@@ -0,0 +1,262 @@
+/*
+ * (C) Copyright 2001
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef FPGA_DEBUG
+#define DBG(x...) printf(x)
+#else
+#define DBG(x...)
+#endif /* DEBUG */
+
+#define MAX_ONES               226
+
+#define IBM405GP_GPIO0_OR      0xef600700  /* GPIO Output */
+#define IBM405GP_GPIO0_TCR     0xef600704  /* GPIO Three-State Control */
+#define IBM405GP_GPIO0_ODR     0xef600718  /* GPIO Open Drain */
+#define IBM405GP_GPIO0_IR      0xef60071c  /* GPIO Input */
+
+#ifdef CFG_FPGA_PRG
+# define FPGA_PRG              CFG_FPGA_PRG /* FPGA program pin (ppc output)*/
+# define FPGA_CLK              CFG_FPGA_CLK /* FPGA clk pin (ppc output)    */
+# define FPGA_DATA             CFG_FPGA_DATA /* FPGA data pin (ppc output)  */
+# define FPGA_DONE             CFG_FPGA_DONE /* FPGA done pin (ppc input)   */
+# define FPGA_INIT             CFG_FPGA_INIT /* FPGA init pin (ppc input)   */
+#else
+# define FPGA_PRG              0x04000000  /* FPGA program pin (ppc output) */
+# define FPGA_CLK              0x02000000  /* FPGA clk pin (ppc output)     */
+# define FPGA_DATA             0x01000000  /* FPGA data pin (ppc output)    */
+# define FPGA_DONE             0x00800000  /* FPGA done pin (ppc input)     */
+# define FPGA_INIT             0x00400000  /* FPGA init pin (ppc input)     */
+#endif
+
+#define ERROR_FPGA_PRG_INIT_LOW  -1        /* Timeout after PRG* asserted   */
+#define ERROR_FPGA_PRG_INIT_HIGH -2        /* Timeout after PRG* deasserted */
+#define ERROR_FPGA_PRG_DONE      -3        /* Timeout after programming     */
+
+#define SET_FPGA(data)         out32(IBM405GP_GPIO0_OR, data)
+
+#define FPGA_WRITE_1 {                                                    \
+        SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set clock to 0 */  \
+        SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set data to 1  */  \
+        SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);  /* set clock to 1 */  \
+        SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1  */
+
+#define FPGA_WRITE_0 {                                                    \
+        SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set clock to 0 */  \
+        SET_FPGA(FPGA_PRG);                         /* set data to 0  */  \
+        SET_FPGA(FPGA_PRG | FPGA_CLK);              /* set clock to 1 */  \
+        SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1  */
+
+
+static int fpga_boot(unsigned char *fpgadata, int size)
+{
+  int i,index,len;
+  int count;
+#ifdef CFG_FPGA_SPARTAN2
+  int j;
+#else
+  unsigned char b;
+  int bit;
+#endif
+
+  /* display infos on fpgaimage */
+  index = 15;
+  for (i=0; i<4; i++)
+    {
+      len = fpgadata[index];
+      DBG("FPGA: %s\n", &(fpgadata[index+1]));
+      index += len+3;
+    }
+
+#ifdef CFG_FPGA_SPARTAN2
+  /* search for preamble 0xFFFFFFFF */
+  while (1)
+    {
+      if ((fpgadata[index] == 0xff) && (fpgadata[index+1] == 0xff) &&
+          (fpgadata[index+2] == 0xff) && (fpgadata[index+3] == 0xff))
+        break; /* preamble found */
+      else
+        index++;
+    }
+#else
+  /* search for preamble 0xFF2X */
+  for (index = 0; index < size-1 ; index++)
+    {
+      if ((fpgadata[index] == 0xff) && ((fpgadata[index+1] & 0xf0) == 0x30))
+	break;
+    }
+  index += 2;
+#endif
+
+  DBG("FPGA: configdata starts at position 0x%x\n",index);
+  DBG("FPGA: length of fpga-data %d\n", size-index);
+
+  /*
+   * Setup port pins for fpga programming
+   */
+  out32(IBM405GP_GPIO0_ODR, 0x00000000);                       /* no open drain pins      */
+  out32(IBM405GP_GPIO0_TCR, FPGA_PRG | FPGA_CLK | FPGA_DATA);  /* setup for output        */
+  out32(IBM405GP_GPIO0_OR,  FPGA_PRG | FPGA_CLK | FPGA_DATA);  /* set output pins to high */
+
+  DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
+  DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
+
+  /*
+   * Init fpga by asserting and deasserting PROGRAM*
+   */
+  SET_FPGA(FPGA_CLK | FPGA_DATA);
+
+  /* Wait for FPGA init line low */
+  count = 0;
+  while (in32(IBM405GP_GPIO0_IR) & FPGA_INIT)
+    {
+      udelay(1000); /* wait 1ms */
+      /* Check for timeout - 100us max, so use 3ms */
+      if (count++ > 3)
+        {
+          DBG("FPGA: Booting failed!\n");
+          return ERROR_FPGA_PRG_INIT_LOW;
+        }
+    }
+
+  DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
+  DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
+
+  /* deassert PROGRAM* */
+  SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
+
+  /* Wait for FPGA end of init period .  */
+  count = 0;
+  while (!(in32(IBM405GP_GPIO0_IR) & FPGA_INIT))
+    {
+      udelay(1000); /* wait 1ms */
+      /* Check for timeout */
+      if (count++ > 3)
+        {
+          DBG("FPGA: Booting failed!\n");
+          return ERROR_FPGA_PRG_INIT_HIGH;
+        }
+    }
+
+  DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
+  DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
+
+  DBG("write configuration data into fpga\n");
+  /* write configuration-data into fpga... */
+
+#ifdef CFG_FPGA_SPARTAN2
+  /*
+   * Load uncompressed image into fpga
+   */
+  for (i=index; i<size; i++)
+    {
+      for (j=0; j<8; j++)
+        {
+          if ((fpgadata[i] & 0x80) == 0x80)
+	    {
+              FPGA_WRITE_1;
+	    }
+          else
+	    {
+              FPGA_WRITE_0;
+	    }
+          fpgadata[i] <<= 1;
+        }
+    }
+#else
+  /* send 0xff 0x20 */
+  FPGA_WRITE_1; FPGA_WRITE_1; FPGA_WRITE_1; FPGA_WRITE_1;
+  FPGA_WRITE_1; FPGA_WRITE_1; FPGA_WRITE_1; FPGA_WRITE_1;
+  FPGA_WRITE_0; FPGA_WRITE_0; FPGA_WRITE_1; FPGA_WRITE_0;
+  FPGA_WRITE_0; FPGA_WRITE_0; FPGA_WRITE_0; FPGA_WRITE_0;
+
+  /*
+  ** Bit_DeCompression
+  **   Code 1           .. maxOnes     : n                 '1's followed by '0'
+  **        maxOnes + 1 .. maxOnes + 1 : n - 1             '1's no '0'
+  **        maxOnes + 2 .. 254         : n - (maxOnes + 2) '0's followed by '1'
+  **        255                        :                   '1'
+  */
+
+  for (i=index; i<size; i++)
+    {
+      b = fpgadata[i];
+      if ((b >= 1) && (b <= MAX_ONES))
+	{
+	  for(bit=0; bit<b; bit++)
+            {
+              FPGA_WRITE_1;
+            }
+	  FPGA_WRITE_0;
+	}
+      else if (b == (MAX_ONES+1))
+	{
+	  for(bit=1; bit<b; bit++)
+            {
+              FPGA_WRITE_1;
+            }
+	}
+      else if ((b >= (MAX_ONES+2)) && (b <= 254))
+	{
+	  for(bit=0; bit<(b-(MAX_ONES+2)); bit++)
+            {
+              FPGA_WRITE_0;
+            }
+          FPGA_WRITE_1;
+	}
+      else if (b == 255)
+        {
+          FPGA_WRITE_1;
+        }
+    }
+#endif
+
+  DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
+  DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
+
+  /*
+   * Check if fpga's DONE signal - correctly booted ?
+   */
+
+  /* Wait for FPGA end of programming period .  */
+  count = 0;
+  while (!(in32(IBM405GP_GPIO0_IR) & FPGA_DONE))
+    {
+      udelay(1000); /* wait 1ms */
+      /* Check for timeout */
+      if (count++ > 3)
+        {
+          DBG("FPGA: Booting failed!\n");
+          return ERROR_FPGA_PRG_DONE;
+        }
+    }
+
+  DBG("FPGA: Booting successful!\n");
+  return 0;
+}
diff --git a/board/esd/common/pci.c b/board/esd/common/pci.c
new file mode 100644
index 00000000000..f8f180c6c4f
--- /dev/null
+++ b/board/esd/common/pci.c
@@ -0,0 +1,202 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include <pci.h>
+
+
+u_long pci9054_iobase;
+
+
+#define PCI_PRIMARY_CAR	(0x500000dc) /* PCI config address reg */
+#define PCI_PRIMARY_CDR	(0x80000000) /* PCI config data    reg */
+
+
+/*-----------------------------------------------------------------------------+
+|  Subroutine:  pci9054_read_config_dword
+|  Description: Read a PCI configuration register
+|  Inputs:
+|               hose            PCI Controller
+|               dev             PCI Bus+Device+Function number
+|               offset          Configuration register number
+|               value           Address of the configuration register value
+|  Return value:
+|               0               Successful
++-----------------------------------------------------------------------------*/
+int pci9054_read_config_dword(struct pci_controller *hose,
+			      pci_dev_t dev, int offset, u32* value)
+{
+  unsigned long      conAdrVal;
+  unsigned long      val;
+
+  /* generate coded value for CON_ADR register */
+  conAdrVal = dev | (offset & 0xfc) | 0x80000000;
+
+  /* Load the CON_ADR (CAR) value first, then read from CON_DATA (CDR) */
+  *(unsigned long *)PCI_PRIMARY_CAR = conAdrVal;
+
+  /* Note: *pResult comes back as -1 if machine check happened */
+  val = in32r(PCI_PRIMARY_CDR);
+
+  *value = (unsigned long) val;
+
+  out32r(PCI_PRIMARY_CAR, 0);
+
+  if ((*(unsigned long *)0x50000304) & 0x60000000)
+    {
+      /* clear pci master/target abort bits */
+      *(unsigned long *)0x50000304 = *(unsigned long *)0x50000304;
+    }
+
+  return 0;
+}
+
+/*-----------------------------------------------------------------------------+
+|  Subroutine:  pci9054_write_config_dword
+|  Description: Write a PCI configuration register.
+|  Inputs:
+|               hose            PCI Controller
+|               dev             PCI Bus+Device+Function number
+|               offset          Configuration register number
+|               Value           Configuration register value
+|  Return value:
+|               0               Successful
+| Updated for pass2 errata #6. Need to disable interrupts and clear the
+| PCICFGADR reg after writing the PCICFGDATA reg.
++-----------------------------------------------------------------------------*/
+int pci9054_write_config_dword(struct pci_controller *hose,
+			       pci_dev_t dev, int offset, u32 value)
+{
+  unsigned long      conAdrVal;
+
+  conAdrVal = dev | (offset & 0xfc) | 0x80000000;
+
+  *(unsigned long *)PCI_PRIMARY_CAR = conAdrVal;
+
+  out32r(PCI_PRIMARY_CDR, value);
+
+  out32r(PCI_PRIMARY_CAR, 0);
+
+  /* clear pci master/target abort bits */
+  *(unsigned long *)0x50000304 = *(unsigned long *)0x50000304;
+
+  return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+#ifdef CONFIG_DASA_SIM
+static void pci_dasa_sim_config_pci9054(struct pci_controller *hose, pci_dev_t dev,
+					struct pci_config_table *_)
+{
+  unsigned int iobase;
+  unsigned short status = 0;
+  unsigned char timer;
+
+  /*
+   * Configure PLX PCI9054
+   */
+  pci_read_config_word(CFG_PCI9054_DEV_FN, PCI_COMMAND, &status);
+  status |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+  pci_write_config_word(CFG_PCI9054_DEV_FN, PCI_COMMAND, status);
+
+  /* Check the latency timer for values >= 0x60.
+   */
+  pci_read_config_byte(CFG_PCI9054_DEV_FN, PCI_LATENCY_TIMER, &timer);
+  if (timer < 0x60)
+    {
+      pci_write_config_byte(CFG_PCI9054_DEV_FN, PCI_LATENCY_TIMER, 0x60);
+    }
+
+  /* Set I/O base register.
+   */
+  pci_write_config_dword(CFG_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, CFG_PCI9054_IOBASE);
+  pci_read_config_dword(CFG_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, &iobase);
+
+  pci9054_iobase = pci_mem_to_phys(CFG_PCI9054_DEV_FN, iobase & PCI_BASE_ADDRESS_MEM_MASK);
+
+  if (pci9054_iobase == 0xffffffff)
+    {
+      printf("Error: Can not set I/O base register.\n");
+      return;
+    }
+}
+#endif
+
+static struct pci_config_table pci9054_config_table[] = {
+#ifndef CONFIG_PCI_PNP
+  { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+    PCI_BUS(CFG_ETH_DEV_FN), PCI_DEV(CFG_ETH_DEV_FN), PCI_FUNC(CFG_ETH_DEV_FN),
+    pci_cfgfunc_config_device, { CFG_ETH_IOBASE,
+				 CFG_ETH_IOBASE,
+				 PCI_COMMAND_IO | PCI_COMMAND_MASTER }},
+#ifdef CONFIG_DASA_SIM
+  { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+    PCI_BUS(CFG_PCI9054_DEV_FN), PCI_DEV(CFG_PCI9054_DEV_FN), PCI_FUNC(CFG_PCI9054_DEV_FN),
+    pci_dasa_sim_config_pci9054 },
+#endif
+#endif
+  { }
+};
+
+static struct pci_controller pci9054_hose = {
+  config_table: pci9054_config_table,
+};
+
+void pci_init(void)
+{
+  struct pci_controller *hose = &pci9054_hose;
+
+  /*
+   * Register the hose
+   */
+  hose->first_busno = 0;
+  hose->last_busno = 0xff;
+
+  /* System memory space */
+  pci_set_region(hose->regions + 0,
+		 0x00000000, 0x00000000, 0x01000000,
+		 PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+  /* PCI Memory space */
+  pci_set_region(hose->regions + 1,
+		 0x00000000, 0xc0000000, 0x10000000,
+		 PCI_REGION_MEM);
+
+  pci_set_ops(hose,
+	      pci_hose_read_config_byte_via_dword,
+	      pci_hose_read_config_word_via_dword,
+	      pci9054_read_config_dword,
+	      pci_hose_write_config_byte_via_dword,
+	      pci_hose_write_config_word_via_dword,
+	      pci9054_write_config_dword);
+
+  hose->region_count = 2;
+
+  pci_register_hose(hose);
+
+  hose->last_busno = pci_hose_scan(hose);
+}
diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c
new file mode 100644
index 00000000000..2dda8fabbd8
--- /dev/null
+++ b/board/esd/cpci405/cpci405.c
@@ -0,0 +1,451 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+#include <cmd_boot.h>
+#include <malloc.h>
+
+/* ------------------------------------------------------------------------- */
+
+#if 0
+#define FPGA_DEBUG
+#endif
+
+/* fpga configuration data - generated by bin2cc */
+const unsigned char fpgadata[] =
+{
+#ifdef CONFIG_CPCI405_VER2
+# include "fpgadata_cpci4052.c"
+#else
+# include "fpgadata_cpci405.c"
+#endif
+};
+
+/*
+ * include common fpga code (for esd boards)
+ */
+#include "../common/fpga.c"
+
+
+/* Prototypes */
+int version2(void);
+int gunzip(void *, int, unsigned char *, int *);
+
+
+int board_pre_init (void)
+{
+#ifndef CONFIG_CPCI405_VER2
+	int index, len, i;
+	int status;
+#endif
+
+#ifdef FPGA_DEBUG
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* set up serial port with default baudrate */
+	(void) get_clocks ();
+	gd->baudrate = CONFIG_BAUDRATE;
+	serial_init ();
+	console_init_f();
+#endif
+
+	/*
+	 * First pull fpga-prg pin low, to disable fpga logic (on version 2 board)
+	 */
+	out32(IBM405GP_GPIO0_ODR, 0x00000000);        /* no open drain pins      */
+	out32(IBM405GP_GPIO0_TCR, CFG_FPGA_PRG);      /* setup for output        */
+	out32(IBM405GP_GPIO0_OR,  CFG_FPGA_PRG);      /* set output pins to high */
+	out32(IBM405GP_GPIO0_OR, 0);                  /* pull prg low            */
+
+	/*
+	 * Boot onboard FPGA
+	 */
+#ifndef CONFIG_CPCI405_VER2
+	if (!version2()) {
+		status = fpga_boot((unsigned char *)fpgadata, sizeof(fpgadata));
+		if (status != 0) {
+			/* booting FPGA failed */
+#ifndef FPGA_DEBUG
+			DECLARE_GLOBAL_DATA_PTR;
+
+			/* set up serial port with default baudrate */
+			(void) get_clocks ();
+			gd->baudrate = CONFIG_BAUDRATE;
+			serial_init ();
+			console_init_f();
+#endif
+			printf("\nFPGA: Booting failed ");
+			switch (status) {
+			case ERROR_FPGA_PRG_INIT_LOW:
+				printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+				break;
+			case ERROR_FPGA_PRG_INIT_HIGH:
+				printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+				break;
+			case ERROR_FPGA_PRG_DONE:
+				printf("(Timeout: DONE not high after programming FPGA)\n ");
+				break;
+			}
+
+			/* display infos on fpgaimage */
+			index = 15;
+			for (i=0; i<4; i++) {
+				len = fpgadata[index];
+				printf("FPGA: %s\n", &(fpgadata[index+1]));
+				index += len+3;
+			}
+			putc ('\n');
+			/* delayed reboot */
+			for (i=20; i>0; i--) {
+				printf("Rebooting in %2d seconds \r",i);
+				for (index=0;index<1000;index++)
+					udelay(1000);
+			}
+			putc ('\n');
+			do_reset(NULL, 0, 0, NULL);
+		}
+	}
+#endif /* !CONFIG_CPCI405_VER2 */
+
+	/*
+	 * IRQ 0-15  405GP internally generated; active high; level sensitive
+	 * IRQ 16    405GP internally generated; active low; level sensitive
+	 * IRQ 17-24 RESERVED
+	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+	 * IRQ 26 (EXT IRQ 1) CAN1 (+FPGA on CPCI4052) ; active low; level sensitive
+	 * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive
+	 * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive
+	 * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
+	 * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
+	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+	 */
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+	mtdcr(uicer, 0x00000000);       /* disable all ints */
+	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
+	mtdcr(uicpr, 0xFFFFFF81);       /* set int polarities */
+	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+int ctermm2(void)
+{
+#ifdef CONFIG_CPCI405_VER2
+	return 0;                       /* no, board is cpci405 */
+#else
+	if ((*(unsigned char *)0xf0000400 == 0x00) &&
+	    (*(unsigned char *)0xf0000401 == 0x01))
+		return 0;               /* no, board is cpci405 */
+	else
+		return -1;              /* yes, board is cterm-m2 */
+#endif
+}
+
+
+int cpci405_host(void)
+{
+	if (mfdcr(strap) & PSR_PCI_ARBIT_EN)
+		return -1;              /* yes, board is cpci405 host */
+	else
+		return 0;               /* no, board is cpci405 adapter */
+}
+
+
+int version2(void)
+{
+	unsigned long cntrl0Reg;
+	unsigned long value;
+
+	/*
+	 * Setup GPIO pins (CS2/GPIO11 as GPIO)
+	 */
+	cntrl0Reg = mfdcr(cntrl0);
+	mtdcr(cntrl0, cntrl0Reg | 0x02000000);
+
+	udelay(1000);                   /* wait some time before reading input */
+	value = in32(IBM405GP_GPIO0_IR) & 0x00100000; /* test GPIO11 */
+
+	/*
+	 * Setup GPIO pins (CS2/GPIO11 as CS again)
+	 */
+	mtdcr(cntrl0, cntrl0Reg);
+
+	if (value)
+		return 0;               /* no, board is version 1.x */
+	else
+		return -1;              /* yes, board is version 2.x */
+}
+
+
+int misc_init_f (void)
+{
+	return 0;  /* dummy implementation */
+}
+
+
+int misc_init_r (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	bd_t *bd = gd->bd;
+	char *	tmp;                    /* Temporary char pointer      */
+
+#ifdef CONFIG_CPCI405_VER2
+	unsigned char *dst;
+	ulong len = sizeof(fpgadata);
+	int status;
+	int index;
+	int i;
+	unsigned long cntrl0Reg;
+
+	/*
+	 * On CPCI-405 version 2 the environment is saved in eeprom!
+	 * FPGA can be gzip compressed (malloc) and booted this late.
+	 */
+
+	if (version2()) {
+		/*
+		 * Setup GPIO pins (CS6+CS7 as GPIO)
+		 */
+		cntrl0Reg = mfdcr(cntrl0);
+		mtdcr(cntrl0, cntrl0Reg | 0x00300000);
+
+		dst = malloc(CFG_FPGA_MAX_SIZE);
+		if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, (int *)&len) != 0) {
+			printf ("GUNZIP ERROR - must RESET board to recover\n");
+			do_reset (NULL, 0, 0, NULL);
+		}
+
+		status = fpga_boot(dst, len);
+		if (status != 0) {
+			printf("\nFPGA: Booting failed ");
+			switch (status) {
+			case ERROR_FPGA_PRG_INIT_LOW:
+				printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+				break;
+			case ERROR_FPGA_PRG_INIT_HIGH:
+				printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+				break;
+			case ERROR_FPGA_PRG_DONE:
+				printf("(Timeout: DONE not high after programming FPGA)\n ");
+				break;
+			}
+
+			/* display infos on fpgaimage */
+			index = 15;
+			for (i=0; i<4; i++) {
+				len = dst[index];
+				printf("FPGA: %s\n", &(dst[index+1]));
+				index += len+3;
+			}
+			putc ('\n');
+			/* delayed reboot */
+			for (i=20; i>0; i--) {
+				printf("Rebooting in %2d seconds \r",i);
+				for (index=0;index<1000;index++)
+					udelay(1000);
+			}
+			putc ('\n');
+			do_reset(NULL, 0, 0, NULL);
+		}
+
+		/* restore gpio/cs settings */
+		mtdcr(cntrl0, cntrl0Reg);
+
+		puts("FPGA:  ");
+
+		/* display infos on fpgaimage */
+		index = 15;
+		for (i=0; i<4; i++) {
+			len = dst[index];
+			printf("%s ", &(dst[index+1]));
+			index += len+3;
+		}
+		putc ('\n');
+
+		free(dst);
+	}
+	else {
+		printf("\n*** U-Boot Version does not match Board Version!\n");
+		printf("*** CPCI-405 Version 2.x detected!\n");
+		printf("*** Please use correct U-Boot version (CPCI4052)!\n\n");
+	}
+
+#else /* CONFIG_CPCI405_VER2 */
+
+	/*
+	 * Generate last byte of ip-addr from code-plug @ 0xf0000400
+	 */
+	if (ctermm2()) {
+		char str[32];
+		unsigned char ipbyte = *(unsigned char *)0xf0000400;
+
+		/*
+		 * Only overwrite ip-addr with allowed values
+		 */
+		if ((ipbyte != 0x00) && (ipbyte != 0xff)) {
+			bd->bi_ip_addr = (bd->bi_ip_addr & 0xffffff00) | ipbyte;
+			sprintf(str, "%ld.%ld.%ld.%ld",
+				(bd->bi_ip_addr & 0xff000000) >> 24,
+				(bd->bi_ip_addr & 0x00ff0000) >> 16,
+				(bd->bi_ip_addr & 0x0000ff00) >> 8,
+				(bd->bi_ip_addr & 0x000000ff));
+			setenv("ipaddr", str);
+		}
+	}
+
+	if (version2()) {
+		printf("\n*** U-Boot Version does not match Board Version!\n");
+		printf("*** CPCI-405 Board Version 1.x detected!\n");
+		printf("*** Please use correct U-Boot version (CPCI405)!\n\n");
+	}
+
+#endif /* CONFIG_CPCI405_VER2 */
+
+	/*
+	 * Write ethernet addr in NVRAM for VxWorks
+	 */
+	tmp = (char *)CFG_NVRAM_BASE_ADDR + CFG_NVRAM_VXWORKS_OFFS;
+	memcpy( (char *)tmp, (char *)&bd->bi_enetaddr[0], 6 );
+	return (0);
+}
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+#ifndef CONFIG_CPCI405_VER2
+	int index;
+	int len;
+#endif
+	unsigned char str[64];
+	int i = getenv_r ("serial#", str, sizeof(str));
+
+	puts ("Board: ");
+
+	if (i == -1) {
+		puts ("### No HW ID - assuming CPCI405");
+	} else {
+		puts(str);
+	}
+
+	if (version2())
+		puts (" (Ver 2.x, ");
+	else
+		puts (" (Ver 1.x, ");
+
+#if 0
+	if ((*(unsigned short *)((unsigned long)CFG_FPGA_BASE_ADDR) + CFG_FPGA_STATUS)
+	    & CFG_FPGA_STATUS_FLASH)
+		puts ("FLASH Bank A, ");
+	else
+		puts ("FLASH Bank B, ");
+#endif
+
+	if (ctermm2()) {
+		printf("CTERM-M2 - Id=0x%02x)", *(unsigned char *)0xf0000400);
+	} else {
+		if (cpci405_host()) {
+			puts ("PCI Host Version)");
+		} else {
+			puts ("PCI Adapter Version)");
+		}
+	}
+
+#ifndef CONFIG_CPCI405_VER2
+	puts ("\nFPGA:  ");
+
+	/* display infos on fpgaimage */
+	index = 15;
+	for (i=0; i<4; i++) {
+		len = fpgadata[index];
+		printf("%s ", &(fpgadata[index+1]));
+		index += len+3;
+	}
+#endif
+
+	putc ('\n');
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	unsigned long val;
+
+	mtdcr(memcfga, mem_mb0cf);
+	val = mfdcr(memcfgd);
+
+#if 0
+	printf("\nmb0cf=%x\n", val); /* test-only */
+	printf("strap=%x\n", mfdcr(strap)); /* test-only */
+#endif
+
+	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("test: 16 MB - ok\n");
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_CPCI405_VER2
+#ifdef CONFIG_IDE_RESET
+
+void ide_set_reset(int on)
+{
+	volatile unsigned short *fpga_mode = (unsigned short *)CFG_FPGA_BASE_ADDR;
+
+	/*
+	 * Assert or deassert CompactFlash Reset Pin
+	 */
+	if (on) {		/* assert RESET */
+		*fpga_mode &= ~(CFG_FPGA_MODE_CF_RESET);
+	} else {		/* release RESET */
+		*fpga_mode |= CFG_FPGA_MODE_CF_RESET;
+	}
+}
+
+#endif /* CONFIG_IDE_RESET */
+#endif /* CONFIG_CPCI405_VER2 */
+
+/* ------------------------------------------------------------------------- */
diff --git a/board/esd/cpci440/cpci440.c b/board/esd/cpci440/cpci440.c
new file mode 100644
index 00000000000..51a5edd20af
--- /dev/null
+++ b/board/esd/cpci440/cpci440.c
@@ -0,0 +1,140 @@
+/*
+ * (C) Copyright 2002
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <asm/processor.h>
+
+
+long int fixed_sdram( void );
+
+int board_pre_init (void)
+{
+	uint reg;
+
+	/*--------------------------------------------------------------------
+	 * Setup the external bus controller/chip selects
+	 *-------------------------------------------------------------------*/
+	mtdcr( ebccfga, xbcfg );
+	reg = mfdcr( ebccfgd );
+	mtdcr( ebccfgd, reg | 0x04000000 );	/* Set ATC */
+
+	mtebc( pb0ap, 0x92015480 );	/* FLASH/SRAM */
+	mtebc( pb0cr, 0xFF87A000 ); /* BAS=0xff8 8MB R/W 16-bit */
+	/* test-only: other regs still missing... */
+
+	/*--------------------------------------------------------------------
+	 * Setup the interrupt controller polarities, triggers, etc.
+	 *-------------------------------------------------------------------*/
+	mtdcr( uic0sr, 0xffffffff );    /* clear all */
+	mtdcr( uic0er, 0x00000000 );    /* disable all */
+	mtdcr( uic0cr, 0x00000009 );    /* SMI & UIC1 crit are critical */
+	mtdcr( uic0pr, 0xfffffe13 );    /* per ref-board manual */
+	mtdcr( uic0tr, 0x01c00008 );    /* per ref-board manual */
+	mtdcr( uic0vr, 0x00000001 );    /* int31 highest, base=0x000 */
+	mtdcr( uic0sr, 0xffffffff );    /* clear all */
+
+	mtdcr( uic1sr, 0xffffffff );    /* clear all */
+	mtdcr( uic1er, 0x00000000 );    /* disable all */
+	mtdcr( uic1cr, 0x00000000 );    /* all non-critical */
+	mtdcr( uic1pr, 0xffffe0ff );    /* per ref-board manual */
+	mtdcr( uic1tr, 0x00ffc000 );    /* per ref-board manual */
+	mtdcr( uic1vr, 0x00000001 );    /* int31 highest, base=0x000 */
+	mtdcr( uic1sr, 0xffffffff );    /* clear all */
+
+	return 0;
+}
+
+
+
+int checkboard (void)
+{
+	sys_info_t sysinfo;
+	get_sys_info(&sysinfo);
+
+	printf("Board: esd CPCI-440\n");
+	printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz/1000000);
+	printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor/1000000);
+	printf("\tPLB: %lu MHz\n", sysinfo.freqPLB/1000000);
+	printf("\tOPB: %lu MHz\n", sysinfo.freqOPB/1000000);
+	printf("\tEPB: %lu MHz\n", sysinfo.freqEPB/1000000);
+	return (0);
+}
+
+
+long int initdram (int board_type)
+{
+	long    dram_size = 0;
+
+	dram_size = fixed_sdram();
+	return dram_size;
+}
+
+
+/*************************************************************************
+ *  fixed sdram init -- doesn't use serial presence detect.
+ *
+ *  Assumes:    64 MB, non-ECC, non-registered
+ *              PLB @ 133 MHz
+ *
+ ************************************************************************/
+long int fixed_sdram( void )
+{
+	uint    reg;
+
+	/*--------------------------------------------------------------------
+	 * Setup some default
+	 *------------------------------------------------------------------*/
+	mtsdram( mem_uabba, 0x00000000 );   /* ubba=0 (default)             */
+	mtsdram( mem_slio,  0x00000000 );   /* rdre=0 wrre=0 rarw=0         */
+	mtsdram( mem_devopt,0x00000000 );   /* dll=0 ds=0 (normal)          */
+	mtsdram( mem_wddctr,0x40000000 );   /* wrcp=0 dcd=0                 */
+	mtsdram( mem_clktr, 0x40000000 );   /* clkp=1 (90 deg wr) dcdt=0    */
+
+	/*--------------------------------------------------------------------
+	 * Setup for board-specific specific mem
+	 *------------------------------------------------------------------*/
+	/*
+	 * Following for CAS Latency = 2.5 @ 133 MHz PLB
+	 */
+	mtsdram( mem_b0cr, 0x00082001 );/* SDBA=0x000, 64MB, Mode 2, enabled*/
+	mtsdram( mem_tr0,  0x410a4012 );/* WR=2  WD=1 CL=2.5 PA=3 CP=4 LD=2 */
+	/* RA=10 RD=3                       */
+	mtsdram( mem_tr1,  0x8080082f );/* SS=T2 SL=STAGE 3 CD=1 CT=0x02f   */
+	mtsdram( mem_rtr,  0x08200000 );/* Rate 15.625 ns @ 133 MHz PLB     */
+	mtsdram( mem_cfg1, 0x00000000 );/* Self-refresh exit, disable PM    */
+	udelay( 400 );                  /* Delay 200 usecs (min)            */
+
+	/*--------------------------------------------------------------------
+	 * Enable the controller, then wait for DCEN to complete
+	 *------------------------------------------------------------------*/
+	mtsdram( mem_cfg0, 0x86000000 );/* DCEN=1, PMUD=1, 64-bit           */
+	for(;;)
+	{
+		mfsdram( mem_mcsts, reg );
+		if( reg & 0x80000000 )
+			break;
+	}
+
+	return( 64 * 1024 * 1024 );      /* 64 MB                           */
+}
diff --git a/board/esd/cpci440/init.S b/board/esd/cpci440/init.S
new file mode 100644
index 00000000000..2dab9f9a298
--- /dev/null
+++ b/board/esd/cpci440/init.S
@@ -0,0 +1,96 @@
+/*
+*  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID   0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K	    0x00000000
+#define SZ_4K	    0x00000010
+#define SZ_16K	    0x00000020
+#define SZ_64K	    0x00000030
+#define SZ_256K	    0x00000040
+#define SZ_1M	    0x00000050
+#define SZ_16M	    0x00000070
+#define SZ_256M	    0x00000090
+
+/* Storage attributes */
+#define SA_W	    0x00000800	    /* Write-through */
+#define SA_I	    0x00000400	    /* Caching inhibited */
+#define SA_M	    0x00000200	    /* Memory coherence */
+#define SA_G	    0x00000100	    /* Guarded */
+#define SA_E	    0x00000080	    /* Endian */
+
+/* Access control */
+#define AC_X	    0x00000024	    /* Execute */
+#define AC_W	    0x00000012	    /* Write */
+#define AC_R	    0x00000009	    /* Read */
+
+/* Some handy macros */
+
+#define EPN(e)		((e) & 0xfffffc00)
+#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a)		( (a)&0x00000fbf )
+
+#define tlbtab_start\
+	mflr    r1  ;\
+	bl 0f	    ;
+
+#define tlbtab_end\
+	.long 0, 0, 0	;   \
+0:	mflr    r0	;   \
+	mtlr    r1	;   \
+	blr		;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ *  Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+    .section .bootpg,"ax"
+    .globl tlbtab
+
+tlbtab:
+    tlbtab_start
+    tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+    tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+    tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
+    tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
+    tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X )
+    tlbtab_end
+
+
diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c
new file mode 100644
index 00000000000..ed86c025f68
--- /dev/null
+++ b/board/esd/pci405/pci405.c
@@ -0,0 +1,254 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+#include <cmd_boot.h>
+#include <malloc.h>
+#include <pci.h>
+#include <405gp_pci.h>
+
+/* ------------------------------------------------------------------------- */
+
+#if 0
+#define FPGA_DEBUG
+#endif
+
+#define PCI_RECONFIG_MAGIC       0x07081967
+
+
+struct pci_config_regs {
+	unsigned short  command;
+	unsigned char   latency_timer;
+	unsigned char   int_line;
+	unsigned long   bar1;
+	unsigned long   bar2;
+	unsigned long   magic;
+};
+
+
+/* fpga configuration data - generated by bin2cc */
+const unsigned char fpgadata[] =
+{
+#include "fpgadata.c"
+};
+
+/*
+ * include common fpga code (for esd boards)
+ */
+#include "../common/fpga.c"
+
+
+/* Prototypes */
+int gunzip(void *, int, unsigned char *, int *);
+
+
+int board_pre_init (void)
+{
+	unsigned long cntrl0Reg;
+
+	/*
+	 * IRQ 0-15  405GP internally generated; active high; level sensitive
+	 * IRQ 16    405GP internally generated; active low; level sensitive
+	 * IRQ 17-24 RESERVED
+	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+	 * IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive
+	 * IRQ 27 (EXT IRQ 2) CAN2; active low; level sensitive
+	 * IRQ 28 (EXT IRQ 3) CAN3; active low; level sensitive
+	 * IRQ 29 (EXT IRQ 4) unused; active low; level sensitive
+	 * IRQ 30 (EXT IRQ 5) FPGA Timestamp; active low; level sensitive
+	 * IRQ 31 (EXT IRQ 6) PCI Reset; active low; level sensitive
+	 */
+	mtdcr(uicsr, 0xFFFFFFFF);        /* clear all ints */
+	mtdcr(uicer, 0x00000000);        /* disable all ints */
+	mtdcr(uiccr, 0x00000000);        /* set all to be non-critical*/
+	mtdcr(uicpr, 0xFFFFFF80);        /* set int polarities */
+	mtdcr(uictr, 0x10000000);        /* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);       /* set vect base=0,INT0 highest priority*/
+	mtdcr(uicsr, 0xFFFFFFFF);        /* clear all ints */
+
+	/*
+	 * Setup GPIO pins (IRQ4/GPIO21 as GPIO)
+	 */
+	cntrl0Reg = mfdcr(cntrl0);
+	mtdcr(cntrl0, cntrl0Reg | 0x00008000);
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+int misc_init_f (void)
+{
+	return 0;  /* dummy implementation */
+}
+
+
+int misc_init_r (void)
+{
+	unsigned char *dst;
+	ulong len = sizeof(fpgadata);
+	int status;
+	int index;
+	int i;
+	struct pci_config_regs *pci_regs;
+
+	/*
+	 * On PCI-405 the environment is saved in eeprom!
+	 * FPGA can be gzip compressed (malloc) and booted this late.
+	 */
+
+	dst = malloc(CFG_FPGA_MAX_SIZE);
+	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, (int *)&len) != 0) {
+		printf ("GUNZIP ERROR - must RESET board to recover\n");
+		do_reset (NULL, 0, 0, NULL);
+	}
+
+	status = fpga_boot(dst, len);
+	if (status != 0) {
+		printf("\nFPGA: Booting failed ");
+		switch (status) {
+		case ERROR_FPGA_PRG_INIT_LOW:
+			printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+			break;
+		case ERROR_FPGA_PRG_INIT_HIGH:
+			printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+			break;
+		case ERROR_FPGA_PRG_DONE:
+			printf("(Timeout: DONE not high after programming FPGA)\n ");
+			break;
+		}
+
+		/* display infos on fpgaimage */
+		index = 15;
+		for (i=0; i<4; i++) {
+			len = dst[index];
+			printf("FPGA: %s\n", &(dst[index+1]));
+			index += len+3;
+		}
+		putc ('\n');
+		/* delayed reboot */
+		for (i=20; i>0; i--) {
+			printf("Rebooting in %2d seconds \r",i);
+			for (index=0;index<1000;index++)
+				udelay(1000);
+		}
+		putc ('\n');
+		do_reset(NULL, 0, 0, NULL);
+	}
+
+	puts("FPGA:  ");
+
+	/* display infos on fpgaimage */
+	index = 15;
+	for (i=0; i<4; i++) {
+		len = dst[index];
+		printf("%s ", &(dst[index+1]));
+		index += len+3;
+	}
+	putc ('\n');
+
+	/*
+	 * Rewrite pci config regs (only after soft-reset with magic set)
+	 */
+	pci_regs = (struct pci_config_regs *)0x10;
+	if (pci_regs->magic == PCI_RECONFIG_MAGIC) {
+		puts("PCI:   Found magic, rewriting config regs...\n");
+		pci_write_config_word(PCIDEVID_405GP, PCI_COMMAND,
+				      pci_regs->command);
+		pci_write_config_byte(PCIDEVID_405GP, PCI_LATENCY_TIMER,
+				      pci_regs->latency_timer);
+		pci_write_config_byte(PCIDEVID_405GP, PCI_INTERRUPT_LINE,
+				      pci_regs->int_line);
+		pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_1,
+				       pci_regs->bar1);
+		pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_2,
+				       pci_regs->bar2);
+	}
+	pci_regs->magic = 0; /* clear magic again */
+
+#if 0 /* test-only */
+	pci_read_config_word(PCIDEVID_405GP, PCI_COMMAND, &(pci_regs->command));
+	pci_read_config_byte(PCIDEVID_405GP, PCI_LATENCY_TIMER, &(pci_regs->latency_timer));
+	pci_read_config_byte(PCIDEVID_405GP, PCI_INTERRUPT_LINE, &(pci_regs->int_line));
+	pci_read_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_1, &(pci_regs->bar1));
+	pci_read_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_2, &(pci_regs->bar2));
+	pci_regs->magic = PCI_RECONFIG_MAGIC; /* set magic */
+#endif
+
+	free(dst);
+	return (0);
+}
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	unsigned char str[64];
+	int i = getenv_r ("serial#", str, sizeof(str));
+
+	puts ("Board: ");
+
+	if (i == -1) {
+		puts ("### No HW ID - assuming CPCI405");
+	} else {
+		puts (str);
+	}
+	putc ('\n');
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	unsigned long val;
+
+	mtdcr(memcfga, mem_mb0cf);
+	val = mfdcr(memcfgd);
+
+#if 0
+	printf("\nmb0cf=%x\n", val); /* test-only */
+	printf("strap=%x\n", mfdcr(strap)); /* test-only */
+#endif
+
+	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("test: 16 MB - ok\n");
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */