ppc4xx: remove PMC405 board

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>

4 files changed, 0 insertions, 173 deletions

diff --git a/board/esd/pmc405/Kconfig b/board/esd/pmc405/Kconfig
deleted file mode 100644
index 3738c68c9c1..00000000000
--- a/board/esd/pmc405/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_PMC405
-
-config SYS_BOARD
-	default "pmc405"
-
-config SYS_VENDOR
-	default "esd"
-
-config SYS_CONFIG_NAME
-	default "PMC405"
-
-endif
diff --git a/board/esd/pmc405/MAINTAINERS b/board/esd/pmc405/MAINTAINERS
deleted file mode 100644
index 148a596e359..00000000000
--- a/board/esd/pmc405/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-PMC405 BOARD
-M:	Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-S:	Maintained
-F:	board/esd/pmc405/
-F:	include/configs/PMC405.h
-F:	configs/PMC405_defconfig
diff --git a/board/esd/pmc405/Makefile b/board/esd/pmc405/Makefile
deleted file mode 100644
index ad98207f3ee..00000000000
--- a/board/esd/pmc405/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-# Objects for Xilinx JTAG programming (CPLD)
-CPLD    = ../common/xilinx_jtag/lenval.o \
-	  ../common/xilinx_jtag/micro.o \
-	  ../common/xilinx_jtag/ports.o
-
-obj-y	= pmc405.o ../common/misc.o ../common/cmd_loadpci.o $(CPLD)
diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c
deleted file mode 100644
index e67ff309dff..00000000000
--- a/board/esd/pmc405/pmc405.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * (C) Copyright 2001-2003
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2005-2009
- * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <command.h>
-#include <malloc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void lxt971_no_sleep(void);
-
-int board_early_init_f (void)
-{
-	/*
-	 * IRQ 0-15  405GP internally generated; active high; level sensitive
-	 * IRQ 16    405GP internally generated; active low; level sensitive
-	 * IRQ 17-24 RESERVED
-	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
-	 * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
-	 * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
-	 * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
-	 * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
-	 * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
-	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
-	 */
-	mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
-	mtdcr(UIC0ER, 0x00000000); /* disable all ints */
-	mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
-	mtdcr(UIC0PR, 0xFFFFFF81); /* set int polarities */
-	mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
-	mtdcr(UIC0VCR, 0x00000001); /* set vect base=0, INT0 highest priority */
-	mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
-
-	/*
-	 * EBC Configuration Register:
-	 * set ready timeout to 512 ebc-clks -> ca. 15 us
-	 */
-	mtebc (EBC0_CFG, 0xa8400000);
-
-	/*
-	 * Setup GPIO pins
-	 */
-	mtdcr(CPC0_CR0, mfdcr(CPC0_CR0) | ((CONFIG_SYS_FPGA_INIT |
-					CONFIG_SYS_FPGA_DONE |
-					CONFIG_SYS_XEREADY |
-					CONFIG_SYS_NONMONARCH |
-					CONFIG_SYS_REV1_2) << 5));
-
-	if (!(in_be32((void *)GPIO0_IR) & CONFIG_SYS_REV1_2)) {
-		/* rev 1.2 boards */
-		mtdcr(CPC0_CR0, mfdcr(CPC0_CR0) | ((CONFIG_SYS_INTA_FAKE |
-						CONFIG_SYS_SELF_RST) << 5));
-	}
-
-	out_be32((void *)GPIO0_OR, CONFIG_SYS_VPEN);
-	/* setup for output */
-	out_be32((void *)GPIO0_TCR, CONFIG_SYS_FPGA_PRG | CONFIG_SYS_FPGA_CLK |
-		 CONFIG_SYS_FPGA_DATA | CONFIG_SYS_XEREADY | CONFIG_SYS_VPEN);
-
-	/*
-	 * - check if rev1_2 is low, then:
-	 * - set/reset CONFIG_SYS_INTA_FAKE/CONFIG_SYS_SELF_RST
-	 *   in TCR to assert INTA# or SELFRST#
-	 */
-	return 0;
-}
-
-int misc_init_r (void)
-{
-	/* adjust flash start and offset */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	/* deassert EREADY# */
-	out_be32((void *)GPIO0_OR,
-		 in_be32((void *)GPIO0_OR) | CONFIG_SYS_XEREADY);
-	return (0);
-}
-
-ushort pmc405_pci_subsys_deviceid(void)
-{
-	ulong val;
-
-	val = in_be32((void *)GPIO0_IR);
-	if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */
-		/* check monarch# signal */
-		if (val & CONFIG_SYS_NONMONARCH)
-			return CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH;
-		return CONFIG_SYS_PCI_SUBSYS_DEVICEID_MONARCH;
-	}
-	return CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH;
-}
-
-/*
- * Check Board Identity
- */
-int checkboard (void)
-{
-	ulong val;
-	char str[64];
-	int i = getenv_f("serial#", str, sizeof(str));
-
-	puts ("Board: ");
-
-	if (i == -1)
-		puts ("### No HW ID - assuming PMC405");
-	else
-		puts(str);
-
-	val = in_be32((void *)GPIO0_IR);
-	if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */
-		puts(" rev1.2 (");
-		if (val & CONFIG_SYS_NONMONARCH) /* monarch# signal */
-			puts("non-");
-		puts("monarch)");
-	} else
-		puts(" <=rev1.1");
-
-	putc ('\n');
-
-	return 0;
-}
-
-void reset_phy(void)
-{
-#ifdef CONFIG_LXT971_NO_SLEEP
-
-	/*
-	 * Disable sleep mode in LXT971
-	 */
-	lxt971_no_sleep();
-#endif
-}