rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

66 files changed, 680 insertions, 680 deletions

diff --git a/board/esd/adciop/flash.c b/board/esd/adciop/flash.c
index d9eccba1ea8..dd578c8939b 100644
--- a/board/esd/adciop/flash.c
+++ b/board/esd/adciop/flash.c
@@ -45,7 +45,7 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
diff --git a/board/esd/apc405/apc405.c b/board/esd/apc405/apc405.c
index e629fd94913..ac9bbb3f45e 100644
--- a/board/esd/apc405/apc405.c
+++ b/board/esd/apc405/apc405.c
@@ -41,7 +41,7 @@ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 extern void lxt971_no_sleep(void);
 extern ulong flash_get_size (ulong base, int banknum);
 
-int flash_banks = CFG_MAX_FLASH_BANKS_DETECT;
+int flash_banks = CONFIG_SYS_MAX_FLASH_BANKS_DETECT;
 
 /* fpga configuration data - gzip compressed and generated by bin2c */
 const unsigned char fpgadata[] =
@@ -140,7 +140,7 @@ int board_early_init_f (void)
 	 * First pull fpga-prg pin low, to disable fpga logic
 	 */
 	out_be32((void*)GPIO0_ODR, 0x00000000);        /* no open drain pins */
-	out_be32((void*)GPIO0_TCR, CFG_FPGA_PRG);      /* setup for output   */
+	out_be32((void*)GPIO0_TCR, CONFIG_SYS_FPGA_PRG);      /* setup for output   */
 	out_be32((void*)GPIO0_OR, 0);                  /* pull prg low       */
 
 	/*
@@ -178,8 +178,8 @@ int board_early_init_f (void)
 		mtebc(pb1cr, 0);
 
 		/* resize CS0 to 32MB */
-		mtebc(pb0ap, CFG_EBC_PB0AP_HWREV8);
-		mtebc(pb0cr, CFG_EBC_PB0CR_HWREV8);
+		mtebc(pb0ap, CONFIG_SYS_EBC_PB0AP_HWREV8);
+		mtebc(pb0cr, CONFIG_SYS_EBC_PB0CR_HWREV8);
 	}
 
 	return 0;
@@ -200,8 +200,8 @@ int board_early_init_r(void)
 
 int misc_init_r(void)
 {
-	u16 *fpga_mode = (u16 *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
-	u16 *fpga_ctrl2 =(u16 *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL2);
+	u16 *fpga_mode = (u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
+	u16 *fpga_ctrl2 =(u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL2);
 	u8 *duart0_mcr = (u8 *)(DUART0_BA + 4);
 	u8 *duart1_mcr = (u8 *)(DUART1_BA + 4);
 	unsigned char *dst;
@@ -222,8 +222,8 @@ int misc_init_r(void)
 	cntrl0Reg = mfdcr(cntrl0);
 	mtdcr(cntrl0, cntrl0Reg | 0x00300000);
 
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip(dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset(NULL, 0, 0, NULL);
 	}
@@ -297,11 +297,11 @@ int misc_init_r(void)
 	/*
 	 * Enable power on PS/2 interface (with reset)
 	 */
-	out_be16(fpga_mode, in_be16(fpga_mode) | CFG_FPGA_CTRL_PS2_RESET);
+	out_be16(fpga_mode, in_be16(fpga_mode) | CONFIG_SYS_FPGA_CTRL_PS2_RESET);
 	for (i=0;i<100;i++)
 		udelay(1000);
 	udelay(1000);
-	out_be16(fpga_mode, in_be16(fpga_mode) & ~CFG_FPGA_CTRL_PS2_RESET);
+	out_be16(fpga_mode, in_be16(fpga_mode) & ~CONFIG_SYS_FPGA_CTRL_PS2_RESET);
 
 	/*
 	 * Enable interrupts in exar duart mcr[3]
@@ -315,15 +315,15 @@ int misc_init_r(void)
 	str = getenv("splashimage");
 	if (str) {
 		logo_addr = (uchar *)simple_strtoul(str, NULL, 16);
-		logo_size = CFG_VIDEO_LOGO_MAX_SIZE;
+		logo_size = CONFIG_SYS_VIDEO_LOGO_MAX_SIZE;
 	} else {
 		logo_addr = logo_bmp;
 		logo_size = sizeof(logo_bmp);
 	}
 
 	if (gd->board_type >= 6) {
-		result = lcd_init((uchar *)CFG_LCD_BIG_REG,
-				  (uchar *)CFG_LCD_BIG_MEM,
+		result = lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG,
+				  (uchar *)CONFIG_SYS_LCD_BIG_MEM,
 				  regs_13505_640_480_16bpp,
 				  sizeof(regs_13505_640_480_16bpp) /
 				  sizeof(regs_13505_640_480_16bpp[0]),
@@ -332,16 +332,16 @@ int misc_init_r(void)
 			/* retry with internal image */
 			logo_addr = logo_bmp;
 			logo_size = sizeof(logo_bmp);
-			lcd_init((uchar *)CFG_LCD_BIG_REG,
-				 (uchar *)CFG_LCD_BIG_MEM,
+			lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG,
+				 (uchar *)CONFIG_SYS_LCD_BIG_MEM,
 				 regs_13505_640_480_16bpp,
 				 sizeof(regs_13505_640_480_16bpp) /
 				 sizeof(regs_13505_640_480_16bpp[0]),
 				 logo_addr, logo_size);
 		}
 	} else {
-		result = lcd_init((uchar *)CFG_LCD_BIG_REG,
-				  (uchar *)CFG_LCD_BIG_MEM,
+		result = lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG,
+				  (uchar *)CONFIG_SYS_LCD_BIG_MEM,
 				  regs_13806_640_480_16bpp,
 				  sizeof(regs_13806_640_480_16bpp) /
 				  sizeof(regs_13806_640_480_16bpp[0]),
@@ -350,8 +350,8 @@ int misc_init_r(void)
 			/* retry with internal image */
 			logo_addr = logo_bmp;
 			logo_size = sizeof(logo_bmp);
-			lcd_init((uchar *)CFG_LCD_BIG_REG,
-				 (uchar *)CFG_LCD_BIG_MEM,
+			lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG,
+				 (uchar *)CONFIG_SYS_LCD_BIG_MEM,
 				 regs_13806_640_480_16bpp,
 				 sizeof(regs_13806_640_480_16bpp) /
 				 sizeof(regs_13806_640_480_16bpp[0]),
@@ -389,12 +389,12 @@ int misc_init_r(void)
 	 * fix environment for field updated units
 	 */
 	if (getenv("altbootcmd") == NULL) {
-		setenv("usb_load", CFG_USB_LOAD_COMMAND);
-		setenv("usbargs", CFG_USB_ARGS);
+		setenv("usb_load", CONFIG_SYS_USB_LOAD_COMMAND);
+		setenv("usbargs", CONFIG_SYS_USB_ARGS);
 		setenv("bootcmd", CONFIG_BOOTCOMMAND);
-		setenv("usb_self", CFG_USB_SELF_COMMAND);
-		setenv("bootlimit", CFG_BOOTLIMIT);
-		setenv("altbootcmd", CFG_ALT_BOOTCOMMAND);
+		setenv("usb_self", CONFIG_SYS_USB_SELF_COMMAND);
+		setenv("bootlimit", CONFIG_SYS_BOOTLIMIT);
+		setenv("altbootcmd", CONFIG_SYS_ALT_BOOTCOMMAND);
 		saveenv();
 	}
 
@@ -426,17 +426,17 @@ int checkboard (void)
 #ifdef CONFIG_IDE_RESET
 void ide_set_reset(int on)
 {
-	u16 *fpga_mode = (u16 *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+	u16 *fpga_mode = (u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
 
 	/*
 	 * Assert or deassert CompactFlash Reset Pin
 	 */
 	if (on) {
 		out_be16(fpga_mode,
-			 in_be16(fpga_mode) & ~CFG_FPGA_CTRL_CF_RESET);
+			 in_be16(fpga_mode) & ~CONFIG_SYS_FPGA_CTRL_CF_RESET);
 	} else {
 		out_be16(fpga_mode,
-			 in_be16(fpga_mode) | CFG_FPGA_CTRL_CF_RESET);
+			 in_be16(fpga_mode) | CONFIG_SYS_FPGA_CTRL_CF_RESET);
 	}
 }
 #endif /* CONFIG_IDE_RESET */
@@ -449,7 +449,7 @@ void reset_phy(void)
 	lxt971_no_sleep();
 }
 
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_BOARD_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT)
 int usb_board_init(void)
 {
 	return 0;
@@ -480,4 +480,4 @@ int usb_board_init_fail(void)
 	usb_board_stop();
 	return 0;
 }
-#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_BOARD_INIT) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) */
diff --git a/board/esd/ar405/flash.c b/board/esd/ar405/flash.c
index 89af1190a8a..274ada9fe5c 100644
--- a/board/esd/ar405/flash.c
+++ b/board/esd/ar405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/ash405/ash405.c b/board/esd/ash405/ash405.c
index c3710ab4811..dd1e2ec2e22 100644
--- a/board/esd/ash405/ash405.c
+++ b/board/esd/ash405/ash405.c
@@ -94,8 +94,8 @@ int misc_init_r (void)
 	int index;
 	int i;
 
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf ("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset (NULL, 0, 0, NULL);
 	}
@@ -157,9 +157,9 @@ int misc_init_r (void)
 	/*
 	 * Reset external DUARTs
 	 */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST);
+	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_DUART_RST);
 	udelay(10); /* wait 10us */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST);
+	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_DUART_RST);
 	udelay(1000); /* wait 1ms */
 
 	/*
diff --git a/board/esd/ash405/flash.c b/board/esd/ash405/flash.c
index 89af1190a8a..274ada9fe5c 100644
--- a/board/esd/ash405/flash.c
+++ b/board/esd/ash405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/canbt/flash.c b/board/esd/canbt/flash.c
index de847f9beac..56c822ec97f 100644
--- a/board/esd/canbt/flash.c
+++ b/board/esd/canbt/flash.c
@@ -47,7 +47,7 @@ unsigned long flash_init (void)
 	unsigned long base_b0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c
index 806c755c6f6..5709d450471 100644
--- a/board/esd/cms700/cms700.c
+++ b/board/esd/cms700/cms700.c
@@ -69,9 +69,9 @@ int board_early_init_f (void)
 	/*
 	 * Reset CPLD via GPIO12 (CS3) pin
 	 */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_PLD_RESET);
+	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_PLD_RESET);
 	udelay(1000); /* wait 1ms */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_PLD_RESET);
+	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_PLD_RESET);
 	udelay(1000); /* wait 1ms */
 
 	return 0;
@@ -86,7 +86,7 @@ int misc_init_r (void)
 	/*
 	 * Setup and enable EEPROM write protection
 	 */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP);
+	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
 
 	return (0);
 }
@@ -101,8 +101,8 @@ int checkboard (void)
 	char str[64];
 	int flashcnt;
 	int delay;
-	volatile unsigned char *led_reg = (unsigned char *)((ulong)CFG_PLD_BASE + 0x1000);
-	volatile unsigned char *ver_reg = (unsigned char *)((ulong)CFG_PLD_BASE + 0x1001);
+	volatile unsigned char *led_reg = (unsigned char *)((ulong)CONFIG_SYS_PLD_BASE + 0x1000);
+	volatile unsigned char *ver_reg = (unsigned char *)((ulong)CONFIG_SYS_PLD_BASE + 0x1001);
 
 	puts ("Board: ");
 
@@ -132,7 +132,7 @@ int checkboard (void)
 
 /* ------------------------------------------------------------------------- */
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 /* Input: <dev_addr>  I2C address of EEPROM device to enable.
  *         <state>     -1: deliver current state
  *	               0: disable write
@@ -143,23 +143,23 @@ int checkboard (void)
  */
 int eeprom_write_enable (unsigned dev_addr, int state)
 {
-	if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+	if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
 		return -1;
 	} else {
 		switch (state) {
 		case 1:
 			/* Enable write access, clear bit GPIO_SINT2. */
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_EEPROM_WP);
+			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		case 0:
 			/* Disable write access, set bit GPIO_SINT2. */
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP);
+			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		default:
 			/* Read current status back. */
-			state = (0 == (in_be32((void *)GPIO0_OR) & CFG_EEPROM_WP));
+			state = (0 == (in_be32((void *)GPIO0_OR) & CONFIG_SYS_EEPROM_WP));
 			break;
 		}
 	}
@@ -173,21 +173,21 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (query) {
 		/* Query write access state. */
-		state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+		state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
 		if (state < 0) {
 			puts ("Query of write access state failed.\n");
 		} else {
 			printf ("Write access for device 0x%0x is %sabled.\n",
-				CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+				CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
 			state = 0;
 		}
 	} else {
 		if ('0' == argv[1][0]) {
 			/* Disable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
 		} else {
 			/* Enable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
 		}
 		if (state < 0) {
 			puts ("Setup of write access state failed.\n");
@@ -200,7 +200,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(eepwren,	2,	0,	do_eep_wren,
 	   "eepwren - Enable / disable / query EEPROM write access\n",
 	   NULL);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
 
 /* ------------------------------------------------------------------------- */
 
diff --git a/board/esd/cms700/flash.c b/board/esd/cms700/flash.c
index 89af1190a8a..274ada9fe5c 100644
--- a/board/esd/cms700/flash.c
+++ b/board/esd/cms700/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c
index a1e0ce5a271..633f64178e6 100644
--- a/board/esd/common/auto_update.c
+++ b/board/esd/common/auto_update.c
@@ -72,7 +72,7 @@ extern int nand_legacy_erase(struct nand_chip* nand, size_t ofs,
 			     size_t len, int clean);
 #endif
 
-extern block_dev_desc_t ide_dev_desc[CFG_IDE_MAXDEVICE];
+extern block_dev_desc_t ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE];
 
 int au_check_cksum_valid(int i, long nbytes)
 {
@@ -335,7 +335,7 @@ static void process_macros (const char *input, char *output)
 	char c, prev;
 	const char *varname_start = NULL;
 	int inputcnt  = strlen (input);
-	int outputcnt = CFG_CBSIZE;
+	int outputcnt = CONFIG_SYS_CBSIZE;
 	int state = 0;	/* 0 = waiting for '$'	*/
 			/* 1 = waiting for '(' or '{' */
 			/* 2 = waiting for ')' or '}' */
@@ -394,7 +394,7 @@ static void process_macros (const char *input, char *output)
 	    case 2:			/* Waiting for )	*/
 		if (c == ')' || c == '}') {
 			int i;
-			char envname[CFG_CBSIZE], *envval;
+			char envname[CONFIG_SYS_CBSIZE], *envval;
 			/* Varname # of chars */
 			int envcnt = input - varname_start - 1;
 
diff --git a/board/esd/common/esd405ep_nand.c b/board/esd/common/esd405ep_nand.c
index 40d1efb081b..736176f5db2 100644
--- a/board/esd/common/esd405ep_nand.c
+++ b/board/esd/common/esd405ep_nand.c
@@ -35,17 +35,17 @@ static void esd405ep_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int
 	struct nand_chip *this = mtd->priv;
 	if (ctrl & NAND_CTRL_CHANGE) {
 		if ( ctrl & NAND_CLE )
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CLE);
+			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_NAND_CLE);
 		else
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_CLE);
+			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_NAND_CLE);
 		if ( ctrl & NAND_ALE )
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_ALE);
+			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_NAND_ALE);
 		else
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_ALE);
+			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_NAND_ALE);
 		if ( ctrl & NAND_NCE )
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_CE);
+			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_NAND_CE);
 		else
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CE);
+			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_NAND_CE);
 	}
 
 	if (cmd != NAND_CMD_NONE)
@@ -58,7 +58,7 @@ static void esd405ep_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int
  */
 static int esd405ep_nand_device_ready(struct mtd_info *mtdinfo)
 {
-	if (in_be32((void *)GPIO0_IR) & CFG_NAND_RDY)
+	if (in_be32((void *)GPIO0_IR) & CONFIG_SYS_NAND_RDY)
 		return 1;
 	return 0;
 }
@@ -69,8 +69,8 @@ int board_nand_init(struct nand_chip *nand)
 	/*
 	 * Set NAND-FLASH GPIO signals to defaults
 	 */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CE);
+	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE));
+	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_NAND_CE);
 
 	/*
 	 * Initialize nand_chip structure
diff --git a/board/esd/common/flash.c b/board/esd/common/flash.c
index bda361ead94..3ea053b8cc4 100644
--- a/board/esd/common/flash.c
+++ b/board/esd/common/flash.c
@@ -27,7 +27,7 @@
 #endif
 #include <asm/processor.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -167,7 +167,7 @@ void flash_print_info  (flash_info_t *info)
 
 	printf ("  Sector Start Addresses:");
 	for (i=0; i<info->sector_count; ++i) {
-#ifdef CFG_FLASH_EMPTY_INFO
+#ifdef CONFIG_SYS_FLASH_EMPTY_INFO
 		/*
 		 * Check if whole sector is erased
 		 */
@@ -221,28 +221,28 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 {
 	short i;
 	short n;
-	CFG_FLASH_WORD_SIZE value;
+	CONFIG_SYS_FLASH_WORD_SIZE value;
 	ulong base = (ulong)addr;
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)addr;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)addr;
 
 	/* Write auto select command: read Manufacturer ID */
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00900090;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00900090;
 
-	value = addr2[CFG_FLASH_READ0];
+	value = addr2[CONFIG_SYS_FLASH_READ0];
 
 	switch (value) {
-	case (CFG_FLASH_WORD_SIZE)AMD_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_MANUFACT:
 		info->flash_id = FLASH_MAN_AMD;
 		break;
-	case (CFG_FLASH_WORD_SIZE)FUJ_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)FUJ_MANUFACT:
 		info->flash_id = FLASH_MAN_FUJ;
 		break;
-	case (CFG_FLASH_WORD_SIZE)SST_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_MANUFACT:
 		info->flash_id = FLASH_MAN_SST;
 		break;
-	case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)EXCEL_MANUFACT:
 		info->flash_id = FLASH_MAN_EXCEL;
 		break;
 	default:
@@ -252,104 +252,104 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 		return (0);			/* no or unknown flash	*/
 	}
 
-	value = addr2[CFG_FLASH_READ1];		/* device ID		*/
+	value = addr2[CONFIG_SYS_FLASH_READ1];		/* device ID		*/
 
 	switch (value) {
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV400T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV400T:
 		info->flash_id += FLASH_AM400T;
 		info->sector_count = 11;
 		info->size = 0x00080000;
 		break;				/* => 0.5 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV400B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV400B:
 		info->flash_id += FLASH_AM400B;
 		info->sector_count = 11;
 		info->size = 0x00080000;
 		break;				/* => 0.5 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV800T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV800T:
 		info->flash_id += FLASH_AM800T;
 		info->sector_count = 19;
 		info->size = 0x00100000;
 		break;				/* => 1 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV800B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV800B:
 		info->flash_id += FLASH_AM800B;
 		info->sector_count = 19;
 		info->size = 0x00100000;
 		break;				/* => 1 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV160T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV160T:
 		info->flash_id += FLASH_AM160T;
 		info->sector_count = 35;
 		info->size = 0x00200000;
 		break;				/* => 2 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV160B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV160B:
 		info->flash_id += FLASH_AM160B;
 		info->sector_count = 35;
 		info->size = 0x00200000;
 		break;				/* => 2 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320T:
 		info->flash_id += FLASH_AM320T;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320B:
 		info->flash_id += FLASH_AM320B;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL322T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL322T:
 		info->flash_id += FLASH_AMDL322T;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL322B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL322B:
 		info->flash_id += FLASH_AMDL322B;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL323T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL323T:
 		info->flash_id += FLASH_AMDL323T;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL323B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL323B:
 		info->flash_id += FLASH_AMDL323B;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV640U:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV640U:
 		info->flash_id += FLASH_AM640U;
 		info->sector_count = 128;
 		info->size = 0x00800000;  break;	/* => 8 MB	*/
 
 #if !(defined(CONFIG_ADCIOP) || defined(CONFIG_DASA_SIM))
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF800A:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF800A:
 		info->flash_id += FLASH_SST800A;
 		info->sector_count = 16;
 		info->size = 0x00100000;
 		break;				/* => 1 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF160A:
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF1601:
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF1602:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF160A:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF1601:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF1602:
 		info->flash_id += FLASH_SST160A;
 		info->sector_count = 32;
 		info->size = 0x00200000;
 		break;				/* => 2 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF3201:
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF3202:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF3201:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF3202:
 		info->flash_id += FLASH_SST320;
 		info->sector_count = 64;
 		info->size = 0x00400000;
 		break;				/* => 4 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF6401:
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF6402:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF6401:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF6402:
 		info->flash_id += FLASH_SST640;
 		info->sector_count = 128;
 		info->size = 0x00800000;
@@ -424,19 +424,19 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 	for (i = 0; i < info->sector_count; i++) {
 		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
 		/* D0 = 1 if protected */
-		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
 		if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_AMD)
 		  info->protect[i] = 0;
 		else
-		  info->protect[i] = addr2[CFG_FLASH_READ2] & 1;
+		  info->protect[i] = addr2[CONFIG_SYS_FLASH_READ2] & 1;
 	}
 
 	/*
 	 * Prevent writes to uninitialized FLASH.
 	 */
 	if (info->flash_id != FLASH_UNKNOWN) {
-		addr2 = (CFG_FLASH_WORD_SIZE *)info->start[0];
-		*addr2 = (CFG_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+		addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)info->start[0];
+		*addr2 = (CONFIG_SYS_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
 	}
 
 	return (info->size);
@@ -448,8 +448,8 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 
 int	flash_erase (flash_info_t *info, int s_first, int s_last)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *)(info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *addr2;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
 	int flag, prot, sect, l_sect;
 	ulong start, now, last;
 	int i;
@@ -490,25 +490,25 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect<=s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-		    addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[sect]);
+		    addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[sect]);
 		    if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-			addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
-			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-			addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-			addr2[0] = (CFG_FLASH_WORD_SIZE)0x00500050;  /* block erase */
+			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+			addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080;
+			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+			addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+			addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00500050;  /* block erase */
 			for (i=0; i<50; i++)
 			  udelay(1000);  /* wait 1 ms */
 		    } else {
 			if (sect == s_first) {
-			    addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-			    addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-			    addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
-			    addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-			    addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+			    addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+			    addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+			    addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080;
+			    addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+			    addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
 			}
-			addr2[0] = (CFG_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
+			addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
 		    }
 		    l_sect = sect;
 		}
@@ -529,9 +529,9 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 
 	start = get_timer (0);
 	last  = start;
-	addr = (CFG_FLASH_WORD_SIZE *)(info->start[l_sect]);
-	while ((addr[0] & (CFG_FLASH_WORD_SIZE)0x00800080) != (CFG_FLASH_WORD_SIZE)0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	addr = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[l_sect]);
+	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) != (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -544,8 +544,8 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 
 DONE:
 	/* reset to read mode */
-	addr = (CFG_FLASH_WORD_SIZE *)info->start[0];
-	addr[0] = (CFG_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+	addr = (CONFIG_SYS_FLASH_WORD_SIZE *)info->start[0];
+	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
 
 	printf (" done\n");
 	return 0;
@@ -630,9 +630,9 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
  */
 static int write_word (flash_info_t *info, ulong dest, ulong data)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *)dest;
-	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *)&data;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *)dest;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *)&data;
 	ulong start;
 	int flag;
 	int i;
@@ -645,11 +645,11 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();
 
-	for (i=0; i<4/sizeof(CFG_FLASH_WORD_SIZE); i++)
+	for (i=0; i<4/sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++)
 	  {
-	    addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-	    addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-	    addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00A000A0;
+	    addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+	    addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+	    addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00A000A0;
 
 	    dest2[i] = data2[i];
 
@@ -659,9 +659,9 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 
 	    /* data polling for D7 */
 	    start = get_timer (0);
-	    while ((dest2[i] & (CFG_FLASH_WORD_SIZE)0x00800080) !=
-		   (data2[i] & (CFG_FLASH_WORD_SIZE)0x00800080)) {
-	      if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	    while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) !=
+		   (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080)) {
+	      if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 		return (1);
 	      }
 	    }
diff --git a/board/esd/common/fpga.c b/board/esd/common/fpga.c
index 9e2be7eaf04..5232dddc9e8 100644
--- a/board/esd/common/fpga.c
+++ b/board/esd/common/fpga.c
@@ -36,12 +36,12 @@
 
 #define MAX_ONES               226
 
-#ifdef CFG_FPGA_PRG
-# define FPGA_PRG              CFG_FPGA_PRG	/* FPGA program pin (ppc output) */
-# define FPGA_CLK              CFG_FPGA_CLK	/* FPGA clk pin (ppc output)    */
-# define FPGA_DATA             CFG_FPGA_DATA	/* FPGA data pin (ppc output)  */
-# define FPGA_DONE             CFG_FPGA_DONE	/* FPGA done pin (ppc input)   */
-# define FPGA_INIT             CFG_FPGA_INIT	/* FPGA init pin (ppc input)   */
+#ifdef CONFIG_SYS_FPGA_PRG
+# define FPGA_PRG              CONFIG_SYS_FPGA_PRG	/* FPGA program pin (ppc output) */
+# define FPGA_CLK              CONFIG_SYS_FPGA_CLK	/* FPGA clk pin (ppc output)    */
+# define FPGA_DATA             CONFIG_SYS_FPGA_DATA	/* FPGA data pin (ppc output)  */
+# define FPGA_DONE             CONFIG_SYS_FPGA_DONE	/* FPGA done pin (ppc input)   */
+# define FPGA_INIT             CONFIG_SYS_FPGA_INIT	/* FPGA init pin (ppc input)   */
 #else
 # define FPGA_PRG              0x04000000	/* FPGA program pin (ppc output) */
 # define FPGA_CLK              0x02000000	/* FPGA clk pin (ppc output)     */
@@ -98,7 +98,7 @@ static int fpga_boot (const unsigned char *fpgadata, int size)
 	int count;
 	unsigned char b;
 
-#ifdef CFG_FPGA_SPARTAN2
+#ifdef CONFIG_SYS_FPGA_SPARTAN2
 	int j;
 #else
 	int bit;
@@ -112,7 +112,7 @@ static int fpga_boot (const unsigned char *fpgadata, int size)
 		index += len + 3;
 	}
 
-#ifdef CFG_FPGA_SPARTAN2
+#ifdef CONFIG_SYS_FPGA_SPARTAN2
 	/* search for preamble 0xFFFFFFFF */
 	while (1) {
 		if ((fpgadata[index] == 0xff) && (fpgadata[index + 1] == 0xff)
@@ -186,7 +186,7 @@ static int fpga_boot (const unsigned char *fpgadata, int size)
 	DBG ("write configuration data into fpga\n");
 	/* write configuration-data into fpga... */
 
-#ifdef CFG_FPGA_SPARTAN2
+#ifdef CONFIG_SYS_FPGA_SPARTAN2
 	/*
 	 * Load uncompressed image into fpga
 	 */
diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c
index c23dc81a266..1eea59ecb12 100644
--- a/board/esd/common/lcd.c
+++ b/board/esd/common/lcd.c
@@ -37,7 +37,7 @@ int lcd_depth;
 unsigned char *glob_lcd_reg;
 unsigned char *glob_lcd_mem;
 
-#if defined(CFG_LCD_ENDIAN)
+#if defined(CONFIG_SYS_LCD_ENDIAN)
 void lcd_setup(int lcd, int config)
 {
 	if (lcd == 0) {
@@ -47,21 +47,21 @@ void lcd_setup(int lcd, int config)
 
 		/* set reset to low */
 		out_be32((void*)GPIO0_OR,
-			 in_be32((void*)GPIO0_OR) & ~CFG_LCD0_RST);
+			 in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_LCD0_RST);
 		udelay(10); /* wait 10us */
 		if (config == 1) {
 			/* big-endian */
 			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) | CFG_LCD_ENDIAN);
+				 in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD_ENDIAN);
 		} else {
 			/* little-endian */
 			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) & ~CFG_LCD_ENDIAN);
+				 in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_LCD_ENDIAN);
 		}
 		udelay(10); /* wait 10us */
 		/* set reset to high */
 		out_be32((void*)GPIO0_OR,
-			 in_be32((void*)GPIO0_OR) | CFG_LCD0_RST);
+			 in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD0_RST);
 	} else {
 		/*
 		 * Set endianess and reset lcd controller 1 (big)
@@ -69,29 +69,29 @@ void lcd_setup(int lcd, int config)
 
 		/* set reset to low */
 		out_be32((void*)GPIO0_OR,
-			 in_be32((void*)GPIO0_OR) & ~CFG_LCD1_RST);
+			 in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_LCD1_RST);
 		udelay(10); /* wait 10us */
 		if (config == 1) {
 			/* big-endian */
 			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) | CFG_LCD_ENDIAN);
+				 in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD_ENDIAN);
 		} else {
 			/* little-endian */
 			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) & ~CFG_LCD_ENDIAN);
+				 in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_LCD_ENDIAN);
 		}
 		udelay(10); /* wait 10us */
 		/* set reset to high */
 		out_be32((void*)GPIO0_OR,
-			 in_be32((void*)GPIO0_OR) | CFG_LCD1_RST);
+			 in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD1_RST);
 	}
 
 	/*
-	 * CFG_LCD_ENDIAN may also be FPGA_RESET, so set inactive
+	 * CONFIG_SYS_LCD_ENDIAN may also be FPGA_RESET, so set inactive
 	 */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_LCD_ENDIAN);
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD_ENDIAN);
 }
-#endif /* CFG_LCD_ENDIAN */
+#endif /* CONFIG_SYS_LCD_ENDIAN */
 
 
 int lcd_bmp(uchar *logo_bmp)
@@ -116,20 +116,20 @@ int lcd_bmp(uchar *logo_bmp)
 		/*
 		 * Decompress bmp image
 		 */
-		len = CFG_VIDEO_LOGO_MAX_SIZE;
-		dst = malloc(CFG_VIDEO_LOGO_MAX_SIZE);
+		len = CONFIG_SYS_VIDEO_LOGO_MAX_SIZE;
+		dst = malloc(CONFIG_SYS_VIDEO_LOGO_MAX_SIZE);
 		if (dst == NULL) {
 			printf("Error: malloc for gunzip failed!\n");
 			return 1;
 		}
-		if (gunzip(dst, CFG_VIDEO_LOGO_MAX_SIZE,
+		if (gunzip(dst, CONFIG_SYS_VIDEO_LOGO_MAX_SIZE,
 			   (uchar *)logo_bmp, &len) != 0) {
 			free(dst);
 			return 1;
 		}
-		if (len == CFG_VIDEO_LOGO_MAX_SIZE) {
+		if (len == CONFIG_SYS_VIDEO_LOGO_MAX_SIZE) {
 			printf("Image could be truncated"
-			       " (increase CFG_VIDEO_LOGO_MAX_SIZE)!\n");
+			       " (increase CONFIG_SYS_VIDEO_LOGO_MAX_SIZE)!\n");
 		}
 
 		/*
diff --git a/board/esd/common/pci.c b/board/esd/common/pci.c
index f711205efe5..dcb764cd1f3 100644
--- a/board/esd/common/pci.c
+++ b/board/esd/common/pci.c
@@ -119,24 +119,24 @@ static void pci_dasa_sim_config_pci9054(struct pci_controller *hose, pci_dev_t d
   /*
    * Configure PLX PCI9054
    */
-  pci_read_config_word(CFG_PCI9054_DEV_FN, PCI_COMMAND, &status);
+  pci_read_config_word(CONFIG_SYS_PCI9054_DEV_FN, PCI_COMMAND, &status);
   status |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-  pci_write_config_word(CFG_PCI9054_DEV_FN, PCI_COMMAND, status);
+  pci_write_config_word(CONFIG_SYS_PCI9054_DEV_FN, PCI_COMMAND, status);
 
   /* Check the latency timer for values >= 0x60.
    */
-  pci_read_config_byte(CFG_PCI9054_DEV_FN, PCI_LATENCY_TIMER, &timer);
+  pci_read_config_byte(CONFIG_SYS_PCI9054_DEV_FN, PCI_LATENCY_TIMER, &timer);
   if (timer < 0x60)
     {
-      pci_write_config_byte(CFG_PCI9054_DEV_FN, PCI_LATENCY_TIMER, 0x60);
+      pci_write_config_byte(CONFIG_SYS_PCI9054_DEV_FN, PCI_LATENCY_TIMER, 0x60);
     }
 
   /* Set I/O base register.
    */
-  pci_write_config_dword(CFG_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, CFG_PCI9054_IOBASE);
-  pci_read_config_dword(CFG_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, &iobase);
+  pci_write_config_dword(CONFIG_SYS_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, CONFIG_SYS_PCI9054_IOBASE);
+  pci_read_config_dword(CONFIG_SYS_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, &iobase);
 
-  pci9054_iobase = pci_mem_to_phys(CFG_PCI9054_DEV_FN, iobase & PCI_BASE_ADDRESS_MEM_MASK);
+  pci9054_iobase = pci_mem_to_phys(CONFIG_SYS_PCI9054_DEV_FN, iobase & PCI_BASE_ADDRESS_MEM_MASK);
 
   if (pci9054_iobase == 0xffffffff)
     {
@@ -149,13 +149,13 @@ static void pci_dasa_sim_config_pci9054(struct pci_controller *hose, pci_dev_t d
 static struct pci_config_table pci9054_config_table[] = {
 #ifndef CONFIG_PCI_PNP
   { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-    PCI_BUS(CFG_ETH_DEV_FN), PCI_DEV(CFG_ETH_DEV_FN), PCI_FUNC(CFG_ETH_DEV_FN),
-    pci_cfgfunc_config_device, { CFG_ETH_IOBASE,
-				 CFG_ETH_IOBASE,
+    PCI_BUS(CONFIG_SYS_ETH_DEV_FN), PCI_DEV(CONFIG_SYS_ETH_DEV_FN), PCI_FUNC(CONFIG_SYS_ETH_DEV_FN),
+    pci_cfgfunc_config_device, { CONFIG_SYS_ETH_IOBASE,
+				 CONFIG_SYS_ETH_IOBASE,
 				 PCI_COMMAND_IO | PCI_COMMAND_MASTER }},
 #ifdef CONFIG_DASA_SIM
   { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-    PCI_BUS(CFG_PCI9054_DEV_FN), PCI_DEV(CFG_PCI9054_DEV_FN), PCI_FUNC(CFG_PCI9054_DEV_FN),
+    PCI_BUS(CONFIG_SYS_PCI9054_DEV_FN), PCI_DEV(CONFIG_SYS_PCI9054_DEV_FN), PCI_FUNC(CONFIG_SYS_PCI9054_DEV_FN),
     pci_dasa_sim_config_pci9054 },
 #endif
 #endif
diff --git a/board/esd/common/xilinx_jtag/ports.h b/board/esd/common/xilinx_jtag/ports.h
index 0e389907ff6..b702fdd9a78 100644
--- a/board/esd/common/xilinx_jtag/ports.h
+++ b/board/esd/common/xilinx_jtag/ports.h
@@ -38,12 +38,12 @@
 #define TDI (short) 2
 
 /*
- * Use CFG_FPGA_xxx defines from board include file.
+ * Use CONFIG_SYS_FPGA_xxx defines from board include file.
  */
-#define JTAG_TMS   CFG_FPGA_PRG     /* output */
-#define JTAG_TCK   CFG_FPGA_CLK     /* output */
-#define JTAG_TDI   CFG_FPGA_DATA    /* output */
-#define JTAG_TDO   CFG_FPGA_DONE    /* input */
+#define JTAG_TMS   CONFIG_SYS_FPGA_PRG     /* output */
+#define JTAG_TCK   CONFIG_SYS_FPGA_CLK     /* output */
+#define JTAG_TDI   CONFIG_SYS_FPGA_DATA    /* output */
+#define JTAG_TDO   CONFIG_SYS_FPGA_DONE    /* input */
 
 /* set the port "p" (TCK, TMS, or TDI) to val (0 or 1) */
 void setPort(short p, short val);
diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c
index 8bc40d5a2f0..dcab9060b66 100644
--- a/board/esd/cpci2dp/cpci2dp.c
+++ b/board/esd/cpci2dp/cpci2dp.c
@@ -36,12 +36,12 @@ int board_early_init_f (void)
 	 * Setup GPIO pins
 	 */
 	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | ((CFG_EEPROM_WP | CFG_PB_LED | CFG_SELF_RST | CFG_INTA_FAKE) << 5));
+	mtdcr(cntrl0, cntrl0Reg | ((CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED | CONFIG_SYS_SELF_RST | CONFIG_SYS_INTA_FAKE) << 5));
 
 	/* set output pins to high */
-	out32(GPIO0_OR,  CFG_EEPROM_WP);
+	out32(GPIO0_OR,  CONFIG_SYS_EEPROM_WP);
 	/* setup for output (LED=off) */
-	out32(GPIO0_TCR, CFG_EEPROM_WP | CFG_PB_LED);
+	out32(GPIO0_TCR, CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED);
 
 	/*
 	 * IRQ 0-15  405GP internally generated; active high; level sensitive
@@ -108,7 +108,7 @@ int checkboard (void)
 	return 0;
 }
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 /* Input: <dev_addr>  I2C address of EEPROM device to enable.
  *	   <state>     -1: deliver current state
  *		       0: disable write
@@ -118,23 +118,23 @@ int checkboard (void)
  *		     0/1: current state if <state> was -1.
  */
 int eeprom_write_enable (unsigned dev_addr, int state) {
-	if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+	if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
 		return -1;
 	} else {
 		switch (state) {
 		case 1:
 			/* Enable write access, clear bit GPIO_SINT2. */
-			out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_EEPROM_WP);
+			out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		case 0:
 			/* Disable write access, set bit GPIO_SINT2. */
-			out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
+			out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		default:
 			/* Read current status back. */
-			state = (0 == (in32(GPIO0_OR) & CFG_EEPROM_WP));
+			state = (0 == (in32(GPIO0_OR) & CONFIG_SYS_EEPROM_WP));
 			break;
 		}
 	}
@@ -142,7 +142,7 @@ int eeprom_write_enable (unsigned dev_addr, int state) {
 }
 #endif
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	int query = argc == 1;
@@ -150,21 +150,21 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (query) {
 		/* Query write access state. */
-		state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+		state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
 		if (state < 0) {
 			puts ("Query of write access state failed.\n");
 		} else {
 			printf ("Write access for device 0x%0x is %sabled.\n",
-				CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+				CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
 			state = 0;
 		}
 	} else {
 		if ('0' == argv[1][0]) {
 			/* Disable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
 		} else {
 			/* Enable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
 		}
 		if (state < 0) {
 			puts ("Setup of write access state failed.\n");
@@ -179,4 +179,4 @@ U_BOOT_CMD(
 	"eepwren - Enable / disable / query EEPROM write access\n",
 	NULL
 	);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/cpci2dp/flash.c b/board/esd/cpci2dp/flash.c
index de847f9beac..56c822ec97f 100644
--- a/board/esd/cpci2dp/flash.c
+++ b/board/esd/cpci2dp/flash.c
@@ -47,7 +47,7 @@ unsigned long flash_init (void)
 	unsigned long base_b0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c
index fb349576a84..c5ccb348a72 100644
--- a/board/esd/cpci405/cpci405.c
+++ b/board/esd/cpci405/cpci405.c
@@ -110,8 +110,8 @@ int board_early_init_f (void)
 	 * First pull fpga-prg pin low, to disable fpga logic (on version 2 board)
 	 */
 	out32(GPIO0_ODR, 0x00000000);	     /* no open drain pins	*/
-	out32(GPIO0_TCR, CFG_FPGA_PRG);      /* setup for output	*/
-	out32(GPIO0_OR,  CFG_FPGA_PRG);      /* set output pins to high */
+	out32(GPIO0_TCR, CONFIG_SYS_FPGA_PRG);      /* setup for output	*/
+	out32(GPIO0_OR,  CONFIG_SYS_FPGA_PRG);      /* set output pins to high */
 	out32(GPIO0_OR, 0);		     /* pull prg low		*/
 
 	/*
@@ -282,8 +282,8 @@ int misc_init_r (void)
 		cntrl0Reg = mfdcr(cntrl0);
 		mtdcr(cntrl0, cntrl0Reg | 0x00300000);
 
-		dst = malloc(CFG_FPGA_MAX_SIZE);
-		if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+		dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+		if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 			printf ("GUNZIP ERROR - must RESET board to recover\n");
 			do_reset (NULL, 0, 0, NULL);
 		}
@@ -347,13 +347,13 @@ int misc_init_r (void)
 
 #ifdef CONFIG_CPCI405_6U
 		if (cpci405_version() == 3) {
-			volatile unsigned short *fpga_mode = (unsigned short *)CFG_FPGA_BASE_ADDR;
-			volatile unsigned char *leds = (unsigned char *)CFG_LED_ADDR;
+			volatile unsigned short *fpga_mode = (unsigned short *)CONFIG_SYS_FPGA_BASE_ADDR;
+			volatile unsigned char *leds = (unsigned char *)CONFIG_SYS_LED_ADDR;
 
 			/*
 			 * Enable outputs in fpga on version 3 board
 			 */
-			*fpga_mode |= CFG_FPGA_MODE_ENABLE_OUTPUT;
+			*fpga_mode |= CONFIG_SYS_FPGA_MODE_ENABLE_OUTPUT;
 
 			/*
 			 * Set outputs to 0
@@ -363,9 +363,9 @@ int misc_init_r (void)
 			/*
 			 * Reset external DUART
 			 */
-			*fpga_mode |= CFG_FPGA_MODE_DUART_RESET;
+			*fpga_mode |= CONFIG_SYS_FPGA_MODE_DUART_RESET;
 			udelay(100);
-			*fpga_mode &= ~(CFG_FPGA_MODE_DUART_RESET);
+			*fpga_mode &= ~(CONFIG_SYS_FPGA_MODE_DUART_RESET);
 		}
 #endif
 	}
@@ -445,9 +445,9 @@ int checkboard (void)
 
 #if 0 /* test-only */
 	if (ver >= 2) {
-		volatile u16 *fpga_status = (u16 *)CFG_FPGA_BASE_ADDR + 1;
+		volatile u16 *fpga_status = (u16 *)CONFIG_SYS_FPGA_BASE_ADDR + 1;
 
-		if (*fpga_status & CFG_FPGA_STATUS_FLASH) {
+		if (*fpga_status & CONFIG_SYS_FPGA_STATUS_FLASH) {
 			puts ("FLASH Bank B, ");
 		} else {
 			puts ("FLASH Bank A, ");
@@ -504,15 +504,15 @@ void reset_phy(void)
 
 void ide_set_reset(int on)
 {
-	volatile unsigned short *fpga_mode = (unsigned short *)CFG_FPGA_BASE_ADDR;
+	volatile unsigned short *fpga_mode = (unsigned short *)CONFIG_SYS_FPGA_BASE_ADDR;
 
 	/*
 	 * Assert or deassert CompactFlash Reset Pin
 	 */
 	if (on) {		/* assert RESET */
-		*fpga_mode &= ~(CFG_FPGA_MODE_CF_RESET);
+		*fpga_mode &= ~(CONFIG_SYS_FPGA_MODE_CF_RESET);
 	} else {		/* release RESET */
-		*fpga_mode |= CFG_FPGA_MODE_CF_RESET;
+		*fpga_mode |= CONFIG_SYS_FPGA_MODE_CF_RESET;
 	}
 }
 
@@ -555,12 +555,12 @@ int pci_pre_init(struct pci_controller *hose)
 
 #ifdef CONFIG_CPCI405AB
 
-#define ONE_WIRE_CLEAR	 (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \
-			  |= CFG_FPGA_MODE_1WIRE_DIR)
-#define ONE_WIRE_SET	 (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \
-			  &= ~CFG_FPGA_MODE_1WIRE_DIR)
-#define ONE_WIRE_GET	 (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_STATUS) \
-			  & CFG_FPGA_MODE_1WIRE)
+#define ONE_WIRE_CLEAR	 (*(volatile unsigned short *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_MODE) \
+			  |= CONFIG_SYS_FPGA_MODE_1WIRE_DIR)
+#define ONE_WIRE_SET	 (*(volatile unsigned short *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_MODE) \
+			  &= ~CONFIG_SYS_FPGA_MODE_1WIRE_DIR)
+#define ONE_WIRE_GET	 (*(volatile unsigned short *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_STATUS) \
+			  & CONFIG_SYS_FPGA_MODE_1WIRE)
 
 /*
  * Generate a 1-wire reset, return 1 if no presence detect was found,
@@ -690,7 +690,7 @@ U_BOOT_CMD(
 	NULL
 	);
 
-#define CFG_I2C_EEPROM_ADDR_2	0x51	/* EEPROM CAT28WC32		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_2	0x51	/* EEPROM CAT28WC32		*/
 #define CONFIG_ENV_SIZE_2	0x800	/* 2048 bytes may be used for env vars*/
 
 /*
@@ -706,7 +706,7 @@ int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	IPaddr_t ipaddr;
 
 	buf = malloc(CONFIG_ENV_SIZE_2);
-	if (eeprom_read(CFG_I2C_EEPROM_ADDR_2, 0, (uchar *)buf, CONFIG_ENV_SIZE_2)) {
+	if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR_2, 0, (uchar *)buf, CONFIG_ENV_SIZE_2)) {
 		puts("\nError reading backplane EEPROM!\n");
 	} else {
 		crc = crc32(0, (uchar *)(buf+4), CONFIG_ENV_SIZE_2-4);
@@ -771,7 +771,7 @@ int do_set_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	crc = crc32(0, (uchar *)(buf+4), CONFIG_ENV_SIZE_2-4);
 	*(ulong *)buf = crc;
 
-	if (eeprom_write(CFG_I2C_EEPROM_ADDR_2, 0, (uchar *)buf, CONFIG_ENV_SIZE_2)) {
+	if (eeprom_write(CONFIG_SYS_I2C_EEPROM_ADDR_2, 0, (uchar *)buf, CONFIG_ENV_SIZE_2)) {
 		puts("\nError writing backplane EEPROM!\n");
 	}
 
diff --git a/board/esd/cpci405/flash.c b/board/esd/cpci405/flash.c
index e766895bb06..d535924f86f 100644
--- a/board/esd/cpci405/flash.c
+++ b/board/esd/cpci405/flash.c
@@ -66,7 +66,7 @@ unsigned long flash_init (void)
 	unsigned long base_b0, base_b1;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c
index 2a42e65de0d..6eedb83ff15 100644
--- a/board/esd/cpci5200/cpci5200.c
+++ b/board/esd/cpci5200/cpci5200.c
@@ -81,7 +81,7 @@ static void sdram_start(int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *            is something else than 0x00000000.
  */
 
@@ -106,9 +106,9 @@ phys_size_t initdram(int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size((long *) CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *) CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x80000000);
 
 	if (test1 > test2) {
 		sdram_start(0);
@@ -144,9 +144,9 @@ phys_size_t initdram(int board_type)
 #if 0
 	/* find RAM size using SDRAM CS1 only */
 	sdram_start(0);
-	get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	sdram_start(1);
-	get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	sdram_start(0);
 #endif
 	/* set SDRAM CS1 size according to the amount of RAM found */
@@ -180,10 +180,10 @@ void flash_afterinit(ulong size)
 		/* adjust mapping */
 		*(vu_long *) MPC5XXX_BOOTCS_START =
 		    *(vu_long *) MPC5XXX_CS0_START =
-		    START_REG(CFG_BOOTCS_START | size);
+		    START_REG(CONFIG_SYS_BOOTCS_START | size);
 		*(vu_long *) MPC5XXX_BOOTCS_STOP =
 		    *(vu_long *) MPC5XXX_CS0_STOP =
-		    STOP_REG(CFG_BOOTCS_START | size, size);
+		    STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
 	}
 }
 
diff --git a/board/esd/cpci5200/strataflash.c b/board/esd/cpci5200/strataflash.c
index d76af02dbef..9b578b5f5ec 100644
--- a/board/esd/cpci5200/strataflash.c
+++ b/board/esd/cpci5200/strataflash.c
@@ -102,7 +102,7 @@ typedef union {
 
 #define NUM_ERASE_REGIONS 4
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips        */
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -121,7 +121,7 @@ static int flash_write_cfiword(flash_info_t * info, ulong dest,
 			       cfiword_t cword);
 static int flash_full_status_check(flash_info_t * info, ulong sector,
 				   ulong tout, char *prompt);
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp,
 				 int len);
 #endif
@@ -185,14 +185,14 @@ unsigned long flash_init(void)
 	 *
 	 */
 
-	address = CFG_FLASH_BASE;
+	address = CONFIG_SYS_FLASH_BASE;
 	size = 0;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		size += flash_info[i].size = flash_get_size(address, i);
-		address += CFG_FLASH_INCREMENT;
+		address += CONFIG_SYS_FLASH_INCREMENT;
 		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
 			printf
 			    ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
@@ -202,9 +202,9 @@ unsigned long flash_init(void)
 
 #if 0				/* test-only */
 	/* Monitor protection ON by default */
-#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
+#if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
 	for (i = 0;
-	     flash_info[0].start[i] < CFG_MONITOR_BASE + monitor_flash_len - 1;
+	     flash_info[0].start[i] < CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1;
 	     i++)
 		(void)flash_real_protect(&flash_info[0], i, 1);
 #endif
@@ -326,7 +326,7 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 			return rc;
 		wp = cp;
 	}
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 	while (cnt >= info->portwidth) {
 		i = info->buffer_size > cnt ? cnt : info->buffer_size;
 		if ((rc = flash_write_cfibuffer(info, wp, src, i)) != ERR_OK)
@@ -347,7 +347,7 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 		wp += info->portwidth;
 		cnt -= info->portwidth;
 	}
-#endif				/* CFG_FLASH_USE_BUFFER_WRITE */
+#endif				/* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 	if (cnt == 0) {
 		return (0);
 	}
@@ -727,7 +727,7 @@ static int flash_write_cfiword(flash_info_t * info, ulong dest, cfiword_t cword)
 	return flash_full_status_check(info, 0, info->write_tout, "write");
 }
 
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 /* loop through the sectors from the highest address
  * when the passed address is greater or equal to the sector address
@@ -801,4 +801,4 @@ static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp,
 	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
 	return retcode;
 }
-#endif				/* CFG_USE_FLASH_BUFFER_WRITE */
+#endif				/* CONFIG_SYS_USE_FLASH_BUFFER_WRITE */
diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c
index 5ab76c6b872..70bae60c68d 100644
--- a/board/esd/cpci750/cpci750.c
+++ b/board/esd/cpci750/cpci750.c
@@ -125,7 +125,7 @@ extern flash_info_t flash_info[];
 /* ------------------------------------------------------------------------- */
 
 /* this is the current GT register space location */
-/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
+/* it starts at CONFIG_SYS_DFL_GT_REGS but moves later to CONFIG_SYS_GT_REGS */
 
 /* Unfortunately, we cant change it while we are in flash, so we initialize it
  * to the "final" value. This means that any debug_led calls before
@@ -134,7 +134,7 @@ extern flash_info_t flash_info[];
  */
 
 void board_prebootm_init (void);
-unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
+unsigned int INTERNAL_REG_BASE_ADDR = CONFIG_SYS_GT_REGS;
 int display_mem_map (void);
 
 /* ------------------------------------------------------------------------- */
@@ -197,7 +197,7 @@ static void gt_pci_config (void)
 
 		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
 		GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+			      (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
 
 	}
 	if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) {	/*if  PCI-X */
@@ -206,7 +206,7 @@ static void gt_pci_config (void)
 
 		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
 		GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+			      (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
 	}
 
 	/* Enable master */
@@ -224,21 +224,21 @@ static void gt_pci_config (void)
 	/* ronen- add write to pci remap registers for 64460.
 	   in 64360 when writing to pci base go and overide remap automaticaly,
 	   in 64460 it doesn't */
-	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_SPACE >> 16);
-	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_SPACE_PCI >> 16);
-	GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CONFIG_SYS_PCI0_IO_SPACE >> 16);
+	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CONFIG_SYS_PCI0_IO_SPACE_PCI >> 16);
+	GT_REG_WRITE (PCI_0_IO_SIZE, (CONFIG_SYS_PCI0_IO_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CONFIG_SYS_PCI0_MEM_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_SPACE >> 16);
-	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_SPACE_PCI >> 16);
-	GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CONFIG_SYS_PCI1_IO_SPACE >> 16);
+	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CONFIG_SYS_PCI1_IO_SPACE_PCI >> 16);
+	GT_REG_WRITE (PCI_1_IO_SIZE, (CONFIG_SYS_PCI1_IO_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CONFIG_SYS_PCI1_MEM_SIZE - 1) >> 16);
 
 	/* PCI interface settings */
 	/* Timeout set to retry forever */
@@ -254,7 +254,7 @@ static void gt_pci_config (void)
 	for (stat = 0; stat <= PCI_HOST1; stat++)
 		pciWriteConfigReg (stat,
 				   PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
-				   SELF, CFG_GT_REGS);
+				   SELF, CONFIG_SYS_GT_REGS);
 #endif
 
 }
@@ -270,7 +270,7 @@ static void gt_cpu_config (void)
 	tmp = GTREGREAD (CPU_CONFIGURATION);
 
 	/* set the SINGLE_CPU bit  see MV64360 P.399 */
-#ifndef CFG_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
+#ifndef CONFIG_SYS_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
 	tmp |= CPU_CONF_SINGLE_CPU;
 #endif
 
@@ -320,7 +320,7 @@ int board_early_init_f (void)
 	 * it last time. (huber)
 	 */
 
-	my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
+	my_remap_gt_regs (CONFIG_SYS_DFL_GT_REGS, CONFIG_SYS_GT_REGS);
 
 	/* No PCI in first release of Port To_do: enable it. */
 #ifdef CONFIG_PCI
@@ -364,45 +364,45 @@ int board_early_init_f (void)
 	 * registers to boot from the sram. (device0)
 	 */
 
-	memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
-	memoryMapDeviceSpace (DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
-	memoryMapDeviceSpace (DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
-	memoryMapDeviceSpace (DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
+	memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
+	memoryMapDeviceSpace (DEVICE1, CONFIG_SYS_DEV1_SPACE, CONFIG_SYS_DEV1_SIZE);
+	memoryMapDeviceSpace (DEVICE2, CONFIG_SYS_DEV2_SPACE, CONFIG_SYS_DEV2_SIZE);
+	memoryMapDeviceSpace (DEVICE3, CONFIG_SYS_DEV3_SPACE, CONFIG_SYS_DEV3_SIZE);
 
 
 	/* configure device timing */
-	GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
-	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
-	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
-	GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_DEV3_PAR);
+	GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CONFIG_SYS_DEV0_PAR);
+	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CONFIG_SYS_DEV1_PAR);
+	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CONFIG_SYS_DEV2_PAR);
+	GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_DEV3_PAR);
 
-#ifdef CFG_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
+#ifdef CONFIG_SYS_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
 	/* detect if we are booting from the 32 bit flash */
 	if (GTREGREAD (DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
 		/* 32 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
 		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS,
-			      CFG_32BIT_BOOT_PAR);
+			      CONFIG_SYS_32BIT_BOOT_PAR);
 	} else {
 		/* 8 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
-		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_32BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
 	}
 #else
 	/* 8 bit boot flash only */
-/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);*/
+/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);*/
 #endif
 
 
 	gt_cpu_config ();
 
 	/* MPP setup */
-	GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
-	GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
-	GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
-	GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
+	GT_REG_WRITE (MPP_CONTROL0, CONFIG_SYS_MPP_CONTROL_0);
+	GT_REG_WRITE (MPP_CONTROL1, CONFIG_SYS_MPP_CONTROL_1);
+	GT_REG_WRITE (MPP_CONTROL2, CONFIG_SYS_MPP_CONTROL_2);
+	GT_REG_WRITE (MPP_CONTROL3, CONFIG_SYS_MPP_CONTROL_3);
 
-	GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
+	GT_REG_WRITE (GPP_LEVEL_CONTROL, CONFIG_SYS_GPP_LEVEL_CONTROL);
 	DEBUG_LED0_ON ();
 	DEBUG_LED1_ON ();
 	DEBUG_LED2_ON ();
@@ -415,7 +415,7 @@ int board_early_init_f (void)
 int misc_init_r ()
 {
 	icache_enable ();
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
 	l2cache_enable ();
 #endif
 #ifdef CONFIG_MPSC
@@ -428,19 +428,19 @@ int misc_init_r ()
 	/* disable the dcache and MMU */
 	dcache_lock ();
 #endif
-	if (flash_info[3].size < CFG_FLASH_INCREMENT) {
+	if (flash_info[3].size < CONFIG_SYS_FLASH_INCREMENT) {
 		unsigned int flash_offset;
 		unsigned int l;
 
-		flash_offset =  CFG_FLASH_INCREMENT - flash_info[3].size;
-		for (l = 0; l < CFG_MAX_FLASH_SECT; l++) {
+		flash_offset =  CONFIG_SYS_FLASH_INCREMENT - flash_info[3].size;
+		for (l = 0; l < CONFIG_SYS_MAX_FLASH_SECT; l++) {
 			if (flash_info[3].start[l] != 0) {
 			      flash_info[3].start[l] += flash_offset;
 			}
 		}
 		flash_protect (FLAG_PROTECT_SET,
-			       CFG_MONITOR_BASE,
-			       CFG_MONITOR_BASE + monitor_flash_len  - 1,
+			       CONFIG_SYS_MONITOR_BASE,
+			       CONFIG_SYS_MONITOR_BASE + monitor_flash_len  - 1,
 			       &flash_info[3]);
 	}
 	return 0;
@@ -449,7 +449,7 @@ int misc_init_r ()
 void after_reloc (ulong dest_addr, gd_t * gd)
 {
 
-  memoryMapDeviceSpace (BOOT_DEVICE, CFG_BOOT_SPACE, CFG_BOOT_SIZE);
+  memoryMapDeviceSpace (BOOT_DEVICE, CONFIG_SYS_BOOT_SPACE, CONFIG_SYS_BOOT_SIZE);
 
   display_mem_map ();
   /* now, jump to the main ppcboot board init code */
@@ -469,7 +469,7 @@ int checkboard (void)
 {
 	int l_type = 0;
 
-	printf ("BOARD: %s\n", CFG_BOARD_NAME);
+	printf ("BOARD: %s\n", CONFIG_SYS_BOARD_NAME);
 	return (l_type);
 }
 
@@ -540,7 +540,7 @@ int display_mem_map (void)
 
 /* DRAM check routines copied from gw8260 */
 
-#if defined (CFG_DRAM_TEST)
+#if defined (CONFIG_SYS_DRAM_TEST)
 
 /*********************************************************************/
 /* NAME:  move64() -  moves a double word (64-bit)		     */
@@ -571,7 +571,7 @@ static void move64 (unsigned long long *src, unsigned long long *dest)
 }
 
 
-#if defined (CFG_DRAM_TEST_DATA)
+#if defined (CONFIG_SYS_DRAM_TEST_DATA)
 
 unsigned long long pattern[] = {
 	0xaaaaaaaaaaaaaaaaLL,
@@ -634,7 +634,7 @@ unsigned long long pattern[] = {
 /*********************************************************************/
 int mem_test_data (void)
 {
-	unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
+	unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_MEMTEST_START;
 	unsigned long long temp64 = 0;
 	int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
 	int i;
@@ -661,9 +661,9 @@ int mem_test_data (void)
 
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_DATA */
+#endif /* CONFIG_SYS_DRAM_TEST_DATA */
 
-#if defined (CFG_DRAM_TEST_ADDRESS)
+#if defined (CONFIG_SYS_DRAM_TEST_ADDRESS)
 /*********************************************************************/
 /* NAME:  mem_test_address() -	test address lines		     */
 /*								     */
@@ -688,8 +688,8 @@ int mem_test_data (void)
 int mem_test_address (void)
 {
 	volatile unsigned int *pmem =
-		(volatile unsigned int *) CFG_MEMTEST_START;
-	const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
+		(volatile unsigned int *) CONFIG_SYS_MEMTEST_START;
+	const unsigned int size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 4;
 	unsigned int i;
 
 	/* write address to each location */
@@ -706,9 +706,9 @@ int mem_test_address (void)
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_ADDRESS */
+#endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */
 
-#if defined (CFG_DRAM_TEST_WALK)
+#if defined (CONFIG_SYS_DRAM_TEST_WALK)
 /*********************************************************************/
 /* NAME:   mem_march() -  memory march				     */
 /*								     */
@@ -766,7 +766,7 @@ int mem_march (volatile unsigned long long *base,
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_WALK */
+#endif /* CONFIG_SYS_DRAM_TEST_WALK */
 
 /*********************************************************************/
 /* NAME:   mem_test_walk() -  a simple walking ones test	     */
@@ -798,8 +798,8 @@ int mem_test_walk (void)
 {
 	unsigned long long mask;
 	volatile unsigned long long *pmem =
-		(volatile unsigned long long *) CFG_MEMTEST_START;
-	const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
+		(volatile unsigned long long *) CONFIG_SYS_MEMTEST_START;
+	const unsigned long size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 8;
 
 	unsigned int i;
 
@@ -865,23 +865,23 @@ int testdram (void)
 	int runaddress = 0;
 	int runwalk    = 0;
 
-#ifdef CFG_DRAM_TEST_DATA
+#ifdef CONFIG_SYS_DRAM_TEST_DATA
 	s = getenv ("testdramdata");
 	rundata = (s && (*s == 'y')) ? 1 : 0;
 #endif
-#ifdef CFG_DRAM_TEST_ADDRESS
+#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
 	s = getenv ("testdramaddress");
 	runaddress = (s && (*s == 'y')) ? 1 : 0;
 #endif
-#ifdef CFG_DRAM_TEST_WALK
+#ifdef CONFIG_SYS_DRAM_TEST_WALK
 	s = getenv ("testdramwalk");
 	runwalk = (s && (*s == 'y')) ? 1 : 0;
 #endif
 
 	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
-		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CFG_MEMTEST_START, CFG_MEMTEST_END);
+		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END);
 	}
-#ifdef CFG_DRAM_TEST_DATA
+#ifdef CONFIG_SYS_DRAM_TEST_DATA
 	if (rundata == 1) {
 		printf ("Test DATA ...  ");
 		if (mem_test_data () == 1) {
@@ -891,7 +891,7 @@ int testdram (void)
 			printf ("ok \n");
 	}
 #endif
-#ifdef CFG_DRAM_TEST_ADDRESS
+#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
 	if (runaddress == 1) {
 		printf ("Test ADDRESS ...  ");
 		if (mem_test_address () == 1) {
@@ -901,7 +901,7 @@ int testdram (void)
 			printf ("ok \n");
 	}
 #endif
-#ifdef CFG_DRAM_TEST_WALK
+#ifdef CONFIG_SYS_DRAM_TEST_WALK
 	if (runwalk == 1) {
 		printf ("Test WALKING ONEs ...  ");
 		if (mem_test_walk () == 1) {
@@ -917,7 +917,7 @@ int testdram (void)
 	return 0;
 
 }
-#endif /* CFG_DRAM_TEST */
+#endif /* CONFIG_SYS_DRAM_TEST */
 
 /* ronen - the below functions are used by the bootm function		*/
 /*  - we map the base register to fbe00000 (same mapping as in the LSP) */
@@ -956,7 +956,7 @@ void board_prebootm_init ()
 /*      GV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (2), 0x0000ff00); */
 
 /* Relocate MV64360 internal regs */
-	my_remap_gt_regs_bootm (CFG_GT_REGS, CFG_DFL_GT_REGS);
+	my_remap_gt_regs_bootm (CONFIG_SYS_GT_REGS, CONFIG_SYS_DFL_GT_REGS);
 
 	icache_disable ();
 	dcache_disable ();
diff --git a/board/esd/cpci750/i2c.c b/board/esd/cpci750/i2c.c
index 5b1bc01c21e..d95567f7df9 100644
--- a/board/esd/cpci750/i2c.c
+++ b/board/esd/cpci750/i2c.c
@@ -46,7 +46,7 @@ static void i2c_init (int speed, int slaveaddr)
 	unsigned int n, m, freq, margin, power;
 	unsigned int actualN = 0, actualM = 0;
 	unsigned int minMargin = 0xffffffff;
-	unsigned int tclk = CFG_TCLK;
+	unsigned int tclk = CONFIG_SYS_TCLK;
 	unsigned int i2cFreq = speed;	/* 100000 max. Fast mode not supported */
 
 	DP (puts ("i2c_init\n"));
@@ -380,7 +380,7 @@ i2c_read (uchar dev_addr, unsigned int offset, int alen, uchar * data,
 	  int len)
 {
 	uchar status = 0;
-	unsigned int i2cFreq = CFG_I2C_SPEED;
+	unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
 
 	DP (puts ("i2c_read\n"));
 
@@ -428,7 +428,7 @@ i2c_write (uchar dev_addr, unsigned int offset, int alen, uchar * data,
 	   int len)
 {
 	uchar status = 0;
-	unsigned int i2cFreq = CFG_I2C_SPEED;
+	unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
 
 	DP (puts ("i2c_write\n"));
 
@@ -464,7 +464,7 @@ int i2c_probe (uchar chip)
 	unsigned int i2c_status;
 #endif
 	uchar status = 0;
-	unsigned int i2cFreq = CFG_I2C_SPEED;
+	unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
 
 	DP (puts ("i2c_probe\n"));
 
diff --git a/board/esd/cpci750/ide.c b/board/esd/cpci750/ide.c
index 0adafe2d085..9bdc5234534 100644
--- a/board/esd/cpci750/ide.c
+++ b/board/esd/cpci750/ide.c
@@ -30,7 +30,7 @@
 #include <ide.h>
 #include <pci.h>
 
-extern ulong ide_bus_offset[CFG_IDE_MAXBUS];
+extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
 
 int ide_preinit (void)
 {
@@ -39,7 +39,7 @@ int ide_preinit (void)
 	int l;
 
 	status = 1;
-	for (l = 0; l < CFG_IDE_MAXBUS; l++) {
+	for (l = 0; l < CONFIG_SYS_IDE_MAXBUS; l++) {
 		ide_bus_offset[l] = -ATA_STATUS;
 	}
 	devbusfn = pci_find_device (0x1103, 0x0004, 0);
@@ -51,11 +51,11 @@ int ide_preinit (void)
 		pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
 				       (u32 *) & ide_bus_offset[0]);
 		ide_bus_offset[0] &= 0xfffffffe;
-		ide_bus_offset[0] += CFG_PCI0_IO_SPACE;
+		ide_bus_offset[0] += CONFIG_SYS_PCI0_IO_SPACE;
 		pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_2,
 				       (u32 *) & ide_bus_offset[1]);
 		ide_bus_offset[1] &= 0xfffffffe;
-		ide_bus_offset[1] += CFG_PCI0_IO_SPACE;
+		ide_bus_offset[1] += CONFIG_SYS_PCI0_IO_SPACE;
 	}
 	return (status);
 }
diff --git a/board/esd/cpci750/local.h b/board/esd/cpci750/local.h
index bca0e1ff506..de3758a5136 100644
--- a/board/esd/cpci750/local.h
+++ b/board/esd/cpci750/local.h
@@ -48,7 +48,7 @@
 /* #define CONFIG_BOOTCOMMAND */
 /* #define CONFIG_RAMBOOTCOMMAND */
 /* #define CONFIG_NFSBOOTCOMMAND */
-/* #define CFG_AUTOLOAD */
+/* #define CONFIG_SYS_AUTOLOAD */
 /* #define CONFIG_PREBOOT */
 
 /* These don't */
diff --git a/board/esd/cpci750/misc.S b/board/esd/cpci750/misc.S
index 160b1d31f76..233fd83bcca 100644
--- a/board/esd/cpci750/misc.S
+++ b/board/esd/cpci750/misc.S
@@ -16,7 +16,7 @@
 board_relocate_rom:
 	mflr	r7
 	/* update the location of the GT registers */
-	lis	r11, CFG_GT_REGS@h
+	lis	r11, CONFIG_SYS_GT_REGS@h
 	/* if we're using ECC, we must use the DMA engine to copy ourselves */
 	bl	start_idma_transfer_0
 	bl	wait_for_idma_0
@@ -29,12 +29,12 @@ board_relocate_rom:
 board_init_ecc:
 	mflr	r7
 	/* NOTE: r10 still contains the location we've been relocated to
-	 * which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */
+	 * which happens to be TOP_OF_RAM - CONFIG_SYS_MONITOR_LEN */
 
 	/* now that we're running from ram, init the rest of main memory
 	 * for ECC use */
-	lis	r8, CFG_MONITOR_LEN@h
-	ori	r8, r8, CFG_MONITOR_LEN@l
+	lis	r8, CONFIG_SYS_MONITOR_LEN@h
+	ori	r8, r8, CONFIG_SYS_MONITOR_LEN@l
 
 	divw	r3, r10, r8
 
@@ -120,15 +120,15 @@ stop_idma_engine_0:
 	blr
 #endif
 
-#ifdef CFG_BOARD_ASM_INIT
+#ifdef CONFIG_SYS_BOARD_ASM_INIT
 	/* NOTE: trashes r3-r7 */
 	.globl board_asm_init
 board_asm_init:
 	/* just move the GT registers to where they belong */
-	lis	r3, CFG_DFL_GT_REGS@h
-	ori	r3, r3, CFG_DFL_GT_REGS@l
-	lis	r4, CFG_GT_REGS@h
-	ori	r4, r4, CFG_GT_REGS@l
+	lis	r3, CONFIG_SYS_DFL_GT_REGS@h
+	ori	r3, r3, CONFIG_SYS_DFL_GT_REGS@l
+	lis	r4, CONFIG_SYS_GT_REGS@h
+	ori	r4, r4, CONFIG_SYS_GT_REGS@l
 	li	r5, INTERNAL_SPACE_DECODE
 
 	/* test to see if we've already moved */
@@ -153,11 +153,11 @@ board_asm_init:
 	cmp	cr0, r7, r6
 	bne	1b
 
-	lis	r3, CFG_INT_SRAM_BASE@h
-	ori	r3, r3, CFG_INT_SRAM_BASE@l
+	lis	r3, CONFIG_SYS_INT_SRAM_BASE@h
+	ori	r3, r3, CONFIG_SYS_INT_SRAM_BASE@l
 	rlwinm  r3, r3, 16, 16, 31
-	lis	r4, CFG_GT_REGS@h
-	ori	r4, r4, CFG_GT_REGS@l
+	lis	r4, CONFIG_SYS_GT_REGS@h
+	ori	r4, r4, CONFIG_SYS_GT_REGS@l
 	li	r5, INTEGRATED_SRAM_BASE_ADDR
 	stwbrx  r3, r5, r4
 
diff --git a/board/esd/cpci750/mpsc.c b/board/esd/cpci750/mpsc.c
index fa8d3bda964..c89426d0858 100644
--- a/board/esd/cpci750/mpsc.c
+++ b/board/esd/cpci750/mpsc.c
@@ -427,7 +427,7 @@ void mpsc_sdma_init (void)
 			  (MV64360_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
 
 /* Setup MPSC internal address space base address	*/
-	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
+	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CONFIG_SYS_GT_REGS);
 
 /* no high address remap*/
 	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
@@ -517,9 +517,9 @@ int galbrg_set_baudrate (int channel, int rate)
 
 #ifdef ZUMA_NTL
 	/* from tclk */
-	clock = (CFG_TCLK / (16 * rate)) - 1;
+	clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
 #else
-	clock = (CFG_TCLK / (16 * rate)) - 1;
+	clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
 #endif
 
 	galbrg_set_CDV (channel, clock);	/* set timer Reg. for BRG */
diff --git a/board/esd/cpci750/pci.c b/board/esd/cpci750/pci.c
index c335ebf0bf8..cbe766ffd23 100644
--- a/board/esd/cpci750/pci.c
+++ b/board/esd/cpci750/pci.c
@@ -932,14 +932,14 @@ void pci_init_board (void)
 
 	/* PCI memory space */
 	pci_set_region (pci0_hose.regions + 0,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_MEM_SIZE, PCI_REGION_MEM);
 
 	/* PCI I/O space */
 	pci_set_region (pci0_hose.regions + 1,
-			CFG_PCI0_IO_SPACE_PCI,
-			CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI0_IO_SPACE_PCI,
+			CONFIG_SYS_PCI0_IO_SPACE, CONFIG_SYS_PCI0_IO_SIZE, PCI_REGION_IO);
 
 	pci_set_ops (&pci0_hose,
 		     pci_hose_read_config_byte_via_dword,
@@ -981,14 +981,14 @@ void pci_init_board (void)
 
 	/* PCI memory space */
 	pci_set_region (pci1_hose.regions + 0,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM);
 
 	/* PCI I/O space */
 	pci_set_region (pci1_hose.regions + 1,
-			CFG_PCI1_IO_SPACE_PCI,
-			CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI1_IO_SPACE_PCI,
+			CONFIG_SYS_PCI1_IO_SPACE, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO);
 
 	pci_set_ops (&pci1_hose,
 		     pci_hose_read_config_byte_via_dword,
diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c
index 0291937e0b3..4c03630fb57 100644
--- a/board/esd/cpci750/sdram_init.c
+++ b/board/esd/cpci750/sdram_init.c
@@ -350,7 +350,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
 	} else
 		dimmInfo->slot = slot;	/* start to fill up dimminfo for this "slot" */
 
-#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
+#ifdef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT
 
 	for (i = 0; i <= 127; i++) {
 		printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
@@ -1656,13 +1656,13 @@ initdram(int board_type)
 	if (dimmInfo2.numOfModuleBanks > 2)
 		printf("Error, SPD claims DIMM2 has >2 banks\n");
 
-	for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
+	for (bank_no = 0; bank_no < CONFIG_SYS_DRAM_BANKS; bank_no++) {
 		/* skip over banks that are not populated */
 		if (! checkbank[bank_no])
 			continue;
 
-		if ((total + check) > CFG_GT_REGS)
-			check = CFG_GT_REGS - total;
+		if ((total + check) > CONFIG_SYS_GT_REGS)
+			check = CONFIG_SYS_GT_REGS - total;
 
 		memory_map_bank(bank_no, total, check);
 		realsize = dram_size((long int *)total, check);
diff --git a/board/esd/cpciiser4/flash.c b/board/esd/cpciiser4/flash.c
index de847f9beac..56c822ec97f 100644
--- a/board/esd/cpciiser4/flash.c
+++ b/board/esd/cpciiser4/flash.c
@@ -47,7 +47,7 @@ unsigned long flash_init (void)
 	unsigned long base_b0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
diff --git a/board/esd/dasa_sim/cmd_dasa_sim.c b/board/esd/dasa_sim/cmd_dasa_sim.c
index 89a4aaf80a5..36dd58c3e4b 100644
--- a/board/esd/dasa_sim/cmd_dasa_sim.c
+++ b/board/esd/dasa_sim/cmd_dasa_sim.c
@@ -48,13 +48,13 @@ static unsigned int PciEepromReadLongVPD (int offs)
 	unsigned int ret;
 	int count;
 
-	pci_write_config_dword (CFG_PCI9054_DEV_FN, 0x4c,
+	pci_write_config_dword (CONFIG_SYS_PCI9054_DEV_FN, 0x4c,
 				(offs << 16) | 0x0003);
 	count = 0;
 
 	for (;;) {
 		udelay (10 * 1000);
-		pci_read_config_dword (CFG_PCI9054_DEV_FN, 0x4c, &ret);
+		pci_read_config_dword (CONFIG_SYS_PCI9054_DEV_FN, 0x4c, &ret);
 		if ((ret & 0x80000000) != 0) {
 			break;
 		} else {
@@ -66,7 +66,7 @@ static unsigned int PciEepromReadLongVPD (int offs)
 		}
 	}
 
-	pci_read_config_dword (CFG_PCI9054_DEV_FN, 0x50, &value);
+	pci_read_config_dword (CONFIG_SYS_PCI9054_DEV_FN, 0x50, &value);
 
 	return value;
 }
@@ -77,14 +77,14 @@ static int PciEepromWriteLongVPD (int offs, unsigned int value)
 	unsigned int ret;
 	int count;
 
-	pci_write_config_dword (CFG_PCI9054_DEV_FN, 0x50, value);
-	pci_write_config_dword (CFG_PCI9054_DEV_FN, 0x4c,
+	pci_write_config_dword (CONFIG_SYS_PCI9054_DEV_FN, 0x50, value);
+	pci_write_config_dword (CONFIG_SYS_PCI9054_DEV_FN, 0x4c,
 				(offs << 16) | 0x80000003);
 	count = 0;
 
 	for (;;) {
 		udelay (10 * 1000);
-		pci_read_config_dword (CFG_PCI9054_DEV_FN, 0x4c, &ret);
+		pci_read_config_dword (CONFIG_SYS_PCI9054_DEV_FN, 0x4c, &ret);
 		if ((ret & 0x80000000) == 0) {
 			break;
 		} else {
@@ -109,7 +109,7 @@ static void showPci9054 (void)
 	for (l = 0; l < 6; l++) {
 		printf ("%02x: ", l * 0x10);
 		for (i = 0; i < 4; i++) {
-			pci_read_config_dword (CFG_PCI9054_DEV_FN,
+			pci_read_config_dword (CONFIG_SYS_PCI9054_DEV_FN,
 						l * 16 + i * 4,
 						(unsigned int *)&val);
 			printf ("%08x ", val);
diff --git a/board/esd/dasa_sim/flash.c b/board/esd/dasa_sim/flash.c
index d2ac13fcd8d..9c71b043cbf 100644
--- a/board/esd/dasa_sim/flash.c
+++ b/board/esd/dasa_sim/flash.c
@@ -47,7 +47,7 @@ unsigned long flash_init (void)
 	unsigned long base_b0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
diff --git a/board/esd/dp405/flash.c b/board/esd/dp405/flash.c
index 89af1190a8a..274ada9fe5c 100644
--- a/board/esd/dp405/flash.c
+++ b/board/esd/dp405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/du405/flash.c b/board/esd/du405/flash.c
index 14549c0147e..240aa09f5b4 100644
--- a/board/esd/du405/flash.c
+++ b/board/esd/du405/flash.c
@@ -47,7 +47,7 @@ unsigned long flash_init (void)
 	unsigned long base_b0, base_b1;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
diff --git a/board/esd/du440/config.mk b/board/esd/du440/config.mk
index 51643345005..91e65ec8a98 100644
--- a/board/esd/du440/config.mk
+++ b/board/esd/du440/config.mk
@@ -33,5 +33,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c
index 6dca35d6267..2f97a1262a3 100644
--- a/board/esd/du440/du440.c
+++ b/board/esd/du440/du440.c
@@ -29,7 +29,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 extern ulong flash_get_size (ulong base, int banknum);
 
 int usbhub_init(void);
@@ -51,8 +51,8 @@ int board_early_init_f(void)
 	/*
 	 * Setup the GPIO pins
 	 */
-	out_be32((void*)GPIO0_OR, 0x00000000 | CFG_GPIO0_EP_EEP);
-	out_be32((void*)GPIO0_TCR, 0x0000001f | CFG_GPIO0_EP_EEP);
+	out_be32((void*)GPIO0_OR, 0x00000000 | CONFIG_SYS_GPIO0_EP_EEP);
+	out_be32((void*)GPIO0_TCR, 0x0000001f | CONFIG_SYS_GPIO0_EP_EEP);
 	out_be32((void*)GPIO0_OSRL, 0x50055400);
 	out_be32((void*)GPIO0_OSRH, 0x55005000);
 	out_be32((void*)GPIO0_TSRL, 0x50055400);
@@ -66,13 +66,13 @@ int board_early_init_f(void)
 
 	out_be32((void*)GPIO1_OR, 0x00000000);
 	out_be32((void*)GPIO1_TCR, 0xc2000000 |
-		 CFG_GPIO1_IORSTN |
-		 CFG_GPIO1_IORST2N |
-		 CFG_GPIO1_LEDUSR1 |
-		 CFG_GPIO1_LEDUSR2 |
-		 CFG_GPIO1_LEDPOST |
-		 CFG_GPIO1_LEDDU);
-	out_be32((void*)GPIO1_ODR, CFG_GPIO1_LEDDU);
+		 CONFIG_SYS_GPIO1_IORSTN |
+		 CONFIG_SYS_GPIO1_IORST2N |
+		 CONFIG_SYS_GPIO1_LEDUSR1 |
+		 CONFIG_SYS_GPIO1_LEDUSR2 |
+		 CONFIG_SYS_GPIO1_LEDPOST |
+		 CONFIG_SYS_GPIO1_LEDDU);
+	out_be32((void*)GPIO1_ODR, CONFIG_SYS_GPIO1_LEDDU);
 	out_be32((void*)GPIO1_OSRL, 0x0c280000);
 	out_be32((void*)GPIO1_OSRH, 0x00000000);
 	out_be32((void*)GPIO1_TSRL, 0xcc000000);
@@ -154,8 +154,8 @@ int board_early_init_f(void)
 		SDR0_CUST0_NDFC_ENABLE		|
 		SDR0_CUST0_NDFC_BW_8_BIT	|
 		SDR0_CUST0_NDFC_ARE_MASK	|
-		(0x80000000 >> (28 + CFG_NAND0_CS)) |
-		(0x80000000 >> (28 + CFG_NAND1_CS));
+		(0x80000000 >> (28 + CONFIG_SYS_NAND0_CS)) |
+		(0x80000000 >> (28 + CONFIG_SYS_NAND1_CS));
 	mtsdr(SDR0_CUST0, sdr0_cust0);
 
 	return 0;
@@ -273,7 +273,7 @@ int misc_init_r(void)
 	 * We have to wait at least 560ms until we may call usbhub_init
 	 */
 	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) |
-		 CFG_GPIO1_IORSTN | CFG_GPIO1_IORST2N);
+		 CONFIG_SYS_GPIO1_IORSTN | CONFIG_SYS_GPIO1_IORST2N);
 
 	/*
 	 * flash USR1/2 LEDs (600ms)
@@ -282,22 +282,22 @@ int misc_init_r(void)
 	 */
 	for (j = 0; j < 3; j++) {
 		out_be32((void*)GPIO1_OR,
-			 (in_be32((void*)GPIO1_OR) & ~CFG_GPIO1_LEDUSR2) |
-			 CFG_GPIO1_LEDUSR1);
+			 (in_be32((void*)GPIO1_OR) & ~CONFIG_SYS_GPIO1_LEDUSR2) |
+			 CONFIG_SYS_GPIO1_LEDUSR1);
 
 		for (i = 0; i < 100; i++)
 			udelay(1000);
 
 		out_be32((void*)GPIO1_OR,
-			 (in_be32((void*)GPIO1_OR) & ~CFG_GPIO1_LEDUSR1) |
-			 CFG_GPIO1_LEDUSR2);
+			 (in_be32((void*)GPIO1_OR) & ~CONFIG_SYS_GPIO1_LEDUSR1) |
+			 CONFIG_SYS_GPIO1_LEDUSR2);
 
 		for (i = 0; i < 100; i++)
 			udelay(1000);
 	}
 
 	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) &
-		 ~(CFG_GPIO1_LEDUSR1 | CFG_GPIO1_LEDUSR2));
+		 ~(CONFIG_SYS_GPIO1_LEDUSR1 | CONFIG_SYS_GPIO1_LEDUSR2));
 
 	if (usbhub_init())
 		du440_post_errors++;
@@ -310,14 +310,14 @@ int misc_init_r(void)
 
 int pld_revision(void)
 {
-	out8(CFG_CPLD_BASE, 0x00);
-	return (int)(in8(CFG_CPLD_BASE) & CPLD_VERSION_MASK);
+	out8(CONFIG_SYS_CPLD_BASE, 0x00);
+	return (int)(in8(CONFIG_SYS_CPLD_BASE) & CPLD_VERSION_MASK);
 }
 
 int board_revision(void)
 {
-	int rpins = (int)((in_be32((void*)GPIO1_IR) & CFG_GPIO1_HWVER_MASK)
-			  >> CFG_GPIO1_HWVER_SHIFT);
+	int rpins = (int)((in_be32((void*)GPIO1_IR) & CONFIG_SYS_GPIO1_HWVER_MASK)
+			  >> CONFIG_SYS_GPIO1_HWVER_SHIFT);
 
 	return ((rpins & 1) << 3) | ((rpins & 2) << 1) |
 		((rpins & 4) >> 1) | ((rpins & 8) >> 3);
@@ -328,7 +328,7 @@ void board_show_activity (ulong timestamp)
 {
 	if ((timestamp % 100) == 0)
 		out_be32((void*)GPIO1_OR,
-			 in_be32((void*)GPIO1_OR) ^ CFG_GPIO1_LEDUSR1);
+			 in_be32((void*)GPIO1_OR) ^ CONFIG_SYS_GPIO1_LEDUSR1);
 }
 
 void show_activity(int arg)
@@ -421,7 +421,7 @@ int pci_pre_init(struct pci_controller *hose)
  * inbound map (PIM). But the bootstrap config choices are limited and
  * may not be sufficient for a given board.
  */
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
 	/*
@@ -437,16 +437,16 @@ void pci_target_init(struct pci_controller *hose)
 	 */
 	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute */
 						/* - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, */
 						/* and enable region */
 
 	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute */
 						/* - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */
+	out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, */
 						/* and enable region */
@@ -479,9 +479,9 @@ void pci_target_init(struct pci_controller *hose)
 	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
 
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
 void pci_master_init(struct pci_controller *hose)
 {
 	unsigned short temp_short;
@@ -496,7 +496,7 @@ void pci_master_init(struct pci_controller *hose)
 			      temp_short | PCI_COMMAND_MASTER |
 			      PCI_COMMAND_MEMORY);
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */
 
 /*
  * is_pci_host
@@ -524,18 +524,18 @@ int last_stage_init(void)
 	int e, i;
 
 	/* everyting is ok: turn on POST-LED */
-	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | CFG_GPIO1_LEDPOST);
+	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | CONFIG_SYS_GPIO1_LEDPOST);
 
 	/* slowly blink on errors and finally keep LED off */
 	for (e = 0; e < du440_post_errors; e++) {
 		out_be32((void*)GPIO1_OR,
-			 in_be32((void*)GPIO1_OR) | CFG_GPIO1_LEDPOST);
+			 in_be32((void*)GPIO1_OR) | CONFIG_SYS_GPIO1_LEDPOST);
 
 		for (i = 0; i < 500; i++)
 			udelay(1000);
 
 		out_be32((void*)GPIO1_OR,
-			 in_be32((void*)GPIO1_OR) & ~CFG_GPIO1_LEDPOST);
+			 in_be32((void*)GPIO1_OR) & ~CONFIG_SYS_GPIO1_LEDPOST);
 
 		for (i = 0; i < 500; i++)
 			udelay(1000);
@@ -583,9 +583,9 @@ int do_dcf77(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		printf("ERROR - no signal\n");
 
 	t1 = t2 = 0;
-	pinold = in_be32((void*)GPIO1_IR) & CFG_GPIO1_DCF77;
+	pinold = in_be32((void*)GPIO1_IR) & CONFIG_SYS_GPIO1_DCF77;
 	while (!ctrlc()) {
-		pin = in_be32((void*)GPIO1_IR) & CFG_GPIO1_DCF77;
+		pin = in_be32((void*)GPIO1_IR) & CONFIG_SYS_GPIO1_DCF77;
 		if (pin && !pinold) { /* bit start */
 			t1 = get_ticks();
 			if (t2 && ((unsigned int)(t1 - t2) /
@@ -661,7 +661,7 @@ U_BOOT_CMD(
 	);
 #endif /* CONFIG_I2C_MULTI_BUS */
 
-#define CFG_BOOT_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS 3
 int boot_eeprom_write (unsigned dev_addr,
 		       unsigned offset,
 		       uchar *buffer,
@@ -671,7 +671,7 @@ int boot_eeprom_write (unsigned dev_addr,
 	unsigned blk_off;
 	int rcode = 0;
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 	eeprom_write_enable(dev_addr, 1);
 #endif
 	/*
@@ -700,9 +700,9 @@ int boot_eeprom_write (unsigned dev_addr,
 		 * bytes that can be ccessed with the single read or write
 		 * operation.
 		 */
-#if defined(CFG_BOOT_EEPROM_PAGE_WRITE_BITS)
+#if defined(CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS)
 
-#define	BOOT_EEPROM_PAGE_SIZE (1 << CFG_BOOT_EEPROM_PAGE_WRITE_BITS)
+#define	BOOT_EEPROM_PAGE_SIZE (1 << CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS)
 #define BOOT_EEPROM_PAGE_OFFSET(x) ((x) & (BOOT_EEPROM_PAGE_SIZE - 1))
 
 		maxlen = BOOT_EEPROM_PAGE_SIZE -
@@ -722,11 +722,11 @@ int boot_eeprom_write (unsigned dev_addr,
 		buffer += len;
 		offset += len;
 
-#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
-		udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
+		udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 #endif
 	}
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 	eeprom_write_enable(dev_addr, 0);
 #endif
 	return rcode;
@@ -779,7 +779,7 @@ int do_setup_boot_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	printf("Writing boot EEPROM ...\n");
-	if (boot_eeprom_write(CFG_I2C_BOOT_EEPROM_ADDR,
+	if (boot_eeprom_write(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR,
 			      0, (uchar*)sdsdp, 16) != 0)
 		printf("boot_eeprom_write failed\n");
 	else
@@ -793,7 +793,7 @@ U_BOOT_CMD(
 	NULL
 	);
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 /*
  * Input: <dev_addr>  I2C address of EEPROM device to enable.
  *         <state>     -1: deliver current state
@@ -805,27 +805,27 @@ U_BOOT_CMD(
  */
 int eeprom_write_enable (unsigned dev_addr, int state)
 {
-	if ((CFG_I2C_EEPROM_ADDR != dev_addr) &&
-	    (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr))
+	if ((CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) &&
+	    (CONFIG_SYS_I2C_BOOT_EEPROM_ADDR != dev_addr))
 		return -1;
 	else {
 		switch (state) {
 		case 1:
 			/* Enable write access, clear bit GPIO_SINT2. */
 			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) & ~CFG_GPIO0_EP_EEP);
+				 in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_GPIO0_EP_EEP);
 			state = 0;
 			break;
 		case 0:
 			/* Disable write access, set bit GPIO_SINT2. */
 			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) | CFG_GPIO0_EP_EEP);
+				 in_be32((void*)GPIO0_OR) | CONFIG_SYS_GPIO0_EP_EEP);
 			state = 0;
 			break;
 		default:
 			/* Read current status back. */
 			state = (0 == (in_be32((void*)GPIO0_OR) &
-				       CFG_GPIO0_EP_EEP));
+				       CONFIG_SYS_GPIO0_EP_EEP));
 			break;
 		}
 	}
@@ -839,21 +839,21 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (query) {
 		/* Query write access state. */
-		state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, -1);
+		state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, -1);
 		if (state < 0)
 			puts ("Query of write access state failed.\n");
 		else {
 			printf ("Write access for device 0x%0x is %sabled.\n",
-				CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+				CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
 			state = 0;
 		}
 	} else {
 		if ('0' == argv[1][0]) {
 			/* Disable write access. */
-			state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 0);
+			state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 0);
 		} else {
 			/* Enable write access. */
-			state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 1);
+			state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 1);
 		}
 		if (state < 0)
 			puts ("Setup of write access state failed.\n");
@@ -865,19 +865,19 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
 	   "eepwren - Enable / disable / query EEPROM write access\n",
 	   NULL);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
 
 static int got_pldirq;
 
 static int pld_interrupt(u32 arg)
 {
 	int rc = -1; /* not for us */
-	u8 status = in8(CFG_CPLD_BASE);
+	u8 status = in8(CONFIG_SYS_CPLD_BASE);
 
 	/* check for PLD interrupt */
 	if (status & PWR_INT_FLAG) {
 		/* reset this int */
-		out8(CFG_CPLD_BASE, 0);
+		out8(CONFIG_SYS_CPLD_BASE, 0);
 		rc = 0;
 		got_pldirq = 1; /* trigger backend */
 	}
@@ -890,7 +890,7 @@ int do_waitpwrirq(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	got_pldirq = 0;
 
 	/* clear any pending interrupt */
-	out8(CFG_CPLD_BASE, 0);
+	out8(CONFIG_SYS_CPLD_BASE, 0);
 
 	irq_install_handler(CPLD_IRQ,
 			    (interrupt_handler_t *)pld_interrupt, 0);
@@ -906,7 +906,7 @@ int do_waitpwrirq(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	if (got_pldirq) {
 		printf("Got interrupt!\n");
 		printf("Power %sready!\n",
-		       in8(CFG_CPLD_BASE) & PWR_RDY ? "":"NOT ");
+		       in8(CONFIG_SYS_CPLD_BASE) & PWR_RDY ? "":"NOT ");
 	}
 
 	irq_free_handler(CPLD_IRQ);
@@ -970,7 +970,7 @@ U_BOOT_CMD(
 int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	unsigned long long start, end;
-	char c, cmd[CFG_CBSIZE];
+	char c, cmd[CONFIG_SYS_CBSIZE];
 	char *p, *d = cmd;
 	int ret, i;
 	ulong us;
@@ -998,7 +998,7 @@ int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return ret;
 }
 U_BOOT_CMD(
-	time,	CFG_MAXARGS,	1,	do_time,
+	time,	CONFIG_SYS_MAXARGS,	1,	do_time,
 	"time    - run command and output execution time\n",
 	NULL
 	);
@@ -1048,7 +1048,7 @@ int do_gfxdemo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return 0;
 }
 U_BOOT_CMD(
-	gfxdemo,	CFG_MAXARGS,	1,	do_gfxdemo,
+	gfxdemo,	CONFIG_SYS_MAXARGS,	1,	do_gfxdemo,
 	"gfxdemo - demo\n",
 	NULL
 	);
diff --git a/board/esd/du440/du440.h b/board/esd/du440/du440.h
index 83fdac7c63f..a124a7ee9b5 100644
--- a/board/esd/du440/du440.h
+++ b/board/esd/du440/du440.h
@@ -20,18 +20,18 @@
 
 #define SDR0_USB0		0x0320     /* USB Control Register */
 
-#define CFG_GPIO0_EP_EEP	(0x80000000 >> 23)       /* GPIO0_23 */
-#define CFG_GPIO1_DCF77		(0x80000000 >> (42-32))  /* GPIO1_42 */
+#define CONFIG_SYS_GPIO0_EP_EEP	(0x80000000 >> 23)       /* GPIO0_23 */
+#define CONFIG_SYS_GPIO1_DCF77		(0x80000000 >> (42-32))  /* GPIO1_42 */
 
-#define CFG_GPIO1_IORSTN	(0x80000000 >> (55-32))  /* GPIO1_55 */
-#define CFG_GPIO1_IORST2N	(0x80000000 >> (47-32))  /* GPIO1_47 */
+#define CONFIG_SYS_GPIO1_IORSTN	(0x80000000 >> (55-32))  /* GPIO1_55 */
+#define CONFIG_SYS_GPIO1_IORST2N	(0x80000000 >> (47-32))  /* GPIO1_47 */
 
-#define CFG_GPIO1_HWVER_MASK	0x000000f0 /* GPIO1_56-59 */
-#define CFG_GPIO1_HWVER_SHIFT	4
-#define CFG_GPIO1_LEDUSR1	0x00000008 /* GPIO1_60 */
-#define CFG_GPIO1_LEDUSR2	0x00000004 /* GPIO1_61 */
-#define CFG_GPIO1_LEDPOST	0x00000002 /* GPIO1_62 */
-#define CFG_GPIO1_LEDDU		0x00000001 /* GPIO1_63 */
+#define CONFIG_SYS_GPIO1_HWVER_MASK	0x000000f0 /* GPIO1_56-59 */
+#define CONFIG_SYS_GPIO1_HWVER_SHIFT	4
+#define CONFIG_SYS_GPIO1_LEDUSR1	0x00000008 /* GPIO1_60 */
+#define CONFIG_SYS_GPIO1_LEDUSR2	0x00000004 /* GPIO1_61 */
+#define CONFIG_SYS_GPIO1_LEDPOST	0x00000002 /* GPIO1_62 */
+#define CONFIG_SYS_GPIO1_LEDDU		0x00000001 /* GPIO1_63 */
 
 #define CPLD_VERSION_MASK	0x0f
 #define PWR_INT_FLAG		0x80
diff --git a/board/esd/du440/init.S b/board/esd/du440/init.S
index 4390b507448..3cac6b11bb0 100644
--- a/board/esd/du440/init.S
+++ b/board/esd/du440/init.S
@@ -44,30 +44,30 @@ tlbtab:
 	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
 	 * speed up boot process. It is patched after relocation to enable SA_I
 	 */
-	tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
+	tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
 
-#ifdef CFG_INIT_RAM_DCACHE
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+	tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
 #endif
 
 	/* TLB-entry for PCI Memory */
-	tlbentry( CFG_PCI_MEMBASE, SZ_256M,  CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M,  CONFIG_SYS_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
 
 	/* TLB-entry for PCI IO */
-	tlbentry( CFG_PCI_IOBASE, SZ_64K, CFG_PCI_IOBASE, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_IOBASE, SZ_64K, CONFIG_SYS_PCI_IOBASE, 1, AC_R|AC_W|SA_G|SA_I )
 
 	/* TLB-entries for EBC:	 CPLD, DUMEM, DUIO */
-	tlbentry( CFG_CPLD_BASE, SZ_1K, CFG_CPLD_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_DUMEM_BASE, SZ_1M, CFG_DUMEM_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_DUIO_BASE, SZ_64K, CFG_DUIO_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_CPLD_BASE, SZ_1K, CONFIG_SYS_CPLD_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_DUMEM_BASE, SZ_1M, CONFIG_SYS_DUMEM_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_DUIO_BASE, SZ_64K, CONFIG_SYS_DUIO_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
 
 	/* TLB-entry for NAND */
-	tlbentry( CFG_NAND0_ADDR, SZ_1K, CFG_NAND0_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_NAND1_ADDR, SZ_1K, CFG_NAND1_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_NAND0_ADDR, SZ_1K, CONFIG_SYS_NAND0_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_NAND1_ADDR, SZ_1K, CONFIG_SYS_NAND1_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
 
 	/* TLB-entry for Internal Registers & OCM */
 	tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0,  AC_R|AC_W|AC_X|SA_I )
diff --git a/board/esd/du440/u-boot.lds b/board/esd/du440/u-boot.lds
index b20fb1c0a28..3cfec834e2d 100644
--- a/board/esd/du440/u-boot.lds
+++ b/board/esd/du440/u-boot.lds
@@ -137,7 +137,7 @@ SECTIONS
    *(COMMON)
   }
 
-  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
 
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/hh405/flash.c b/board/esd/hh405/flash.c
index 89af1190a8a..274ada9fe5c 100644
--- a/board/esd/hh405/flash.c
+++ b/board/esd/hh405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c
index 9fc41c879c4..efadf164602 100644
--- a/board/esd/hh405/hh405.c
+++ b/board/esd/hh405/hh405.c
@@ -345,7 +345,7 @@ int board_early_init_f (void)
 	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
 	mtdcr(uicer, 0x00000000);       /* disable all ints */
 	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
-	mtdcr(uicpr, CFG_UIC0_POLARITY);/* set int polarities */
+	mtdcr(uicpr, CONFIG_SYS_UIC0_POLARITY);/* set int polarities */
 	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
 	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
 	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
@@ -363,26 +363,26 @@ int cf_enable(void)
 	int i;
 
 	volatile unsigned short *fpga_ctrl =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
 	volatile unsigned short *fpga_status =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 2);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 2);
 
 	if (gd->board_type >= 2) {
-		if (*fpga_status & CFG_FPGA_STATUS_CF_DETECT) {
-			if (!(*fpga_ctrl & CFG_FPGA_CTRL_CF_BUS_EN)) {
-				*fpga_ctrl &= ~CFG_FPGA_CTRL_CF_PWRN;
+		if (*fpga_status & CONFIG_SYS_FPGA_STATUS_CF_DETECT) {
+			if (!(*fpga_ctrl & CONFIG_SYS_FPGA_CTRL_CF_BUS_EN)) {
+				*fpga_ctrl &= ~CONFIG_SYS_FPGA_CTRL_CF_PWRN;
 
 				for (i=0; i<300; i++)
 					udelay(1000);
 
-				*fpga_ctrl |= CFG_FPGA_CTRL_CF_BUS_EN;
+				*fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_CF_BUS_EN;
 
 				for (i=0; i<20; i++)
 					udelay(1000);
 			}
 		} else {
-			*fpga_ctrl &= ~CFG_FPGA_CTRL_CF_BUS_EN;
-			*fpga_ctrl |= CFG_FPGA_CTRL_CF_PWRN;
+			*fpga_ctrl &= ~CONFIG_SYS_FPGA_CTRL_CF_BUS_EN;
+			*fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_CF_PWRN;
 		}
 	}
 
@@ -392,11 +392,11 @@ int cf_enable(void)
 int misc_init_r (void)
 {
 	volatile unsigned short *fpga_ctrl =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
 	volatile unsigned short *lcd_contrast =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 4);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 4);
 	volatile unsigned short *lcd_backlight =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 6);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 6);
 	unsigned char *dst;
 	ulong len = sizeof(fpgadata);
 	int status;
@@ -405,8 +405,8 @@ int misc_init_r (void)
 	char *str;
 	unsigned long contrast0 = 0xffffffff;
 
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf ("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset (NULL, 0, 0, NULL);
 	}
@@ -474,22 +474,22 @@ int misc_init_r (void)
 	/*
 	 * Setup and enable EEPROM write protection
 	 */
-	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
+	out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
 
 	/*
 	 * Reset touch-screen controller
 	 */
-	out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_TOUCH_RST);
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_TOUCH_RST);
 	udelay(1000);
-	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_TOUCH_RST);
+	out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_TOUCH_RST);
 
 	/*
 	 * Enable power on PS/2 interface (with reset)
 	 */
-	*fpga_ctrl &= ~(CFG_FPGA_CTRL_PS2_PWR);
+	*fpga_ctrl &= ~(CONFIG_SYS_FPGA_CTRL_PS2_PWR);
 	for (i=0;i<500;i++)
 		udelay(1000);
-	*fpga_ctrl |= (CFG_FPGA_CTRL_PS2_PWR);
+	*fpga_ctrl |= (CONFIG_SYS_FPGA_CTRL_PS2_PWR);
 
 	/*
 	 * Get contrast value from environment variable
@@ -512,11 +512,11 @@ int misc_init_r (void)
 		/*
 		 * Switch backlight on
 		 */
-		*fpga_ctrl |= CFG_FPGA_CTRL_VGA0_BL;
+		*fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_VGA0_BL;
 		*lcd_backlight = 0x0000;
 
 		lcd_setup(1, 0);
-		lcd_init((uchar *)CFG_LCD_BIG_REG, (uchar *)CFG_LCD_BIG_MEM,
+		lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
 			 regs_13806_1024_768_8bpp,
 			 sizeof(regs_13806_1024_768_8bpp)/sizeof(regs_13806_1024_768_8bpp[0]),
 			 logo_bmp_1024, sizeof(logo_bmp_1024));
@@ -524,11 +524,11 @@ int misc_init_r (void)
 		/*
 		 * Switch backlight on
 		 */
-		*fpga_ctrl &= ~CFG_FPGA_CTRL_VGA0_BL;
+		*fpga_ctrl &= ~CONFIG_SYS_FPGA_CTRL_VGA0_BL;
 		*lcd_backlight = 0x0000;
 
 		lcd_setup(1, 0);
-		lcd_init((uchar *)CFG_LCD_BIG_REG, (uchar *)CFG_LCD_BIG_MEM,
+		lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
 			 regs_13806_640_480_16bpp,
 			 sizeof(regs_13806_640_480_16bpp)/sizeof(regs_13806_640_480_16bpp[0]),
 			 logo_bmp_640, sizeof(logo_bmp_640));
@@ -545,7 +545,7 @@ int misc_init_r (void)
 		/*
 		 * Switch backlight on
 		 */
-		*fpga_ctrl |= CFG_FPGA_CTRL_VGA0_BL | CFG_FPGA_CTRL_VGA0_BL_MODE;
+		*fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_VGA0_BL | CONFIG_SYS_FPGA_CTRL_VGA0_BL_MODE;
 		/*
 		 * Set lcd clock (small epson)
 		 */
@@ -553,7 +553,7 @@ int misc_init_r (void)
 		udelay(100);               /* wait for 100 us */
 
 		lcd_setup(0, 1);
-		lcd_init((uchar *)CFG_LCD_SMALL_REG, (uchar *)CFG_LCD_SMALL_MEM,
+		lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
 			 regs_13705_320_240_8bpp,
 			 sizeof(regs_13705_320_240_8bpp)/sizeof(regs_13705_320_240_8bpp[0]),
 			 logo_bmp_320_8bpp, sizeof(logo_bmp_320_8bpp));
@@ -570,14 +570,14 @@ int misc_init_r (void)
 		/*
 		 * Switch backlight on
 		 */
-		*fpga_ctrl |= CFG_FPGA_CTRL_VGA0_BL | CFG_FPGA_CTRL_VGA0_BL_MODE;
+		*fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_VGA0_BL | CONFIG_SYS_FPGA_CTRL_VGA0_BL_MODE;
 		/*
 		 * Set lcd clock (small epson), enable 1-wire interface
 		 */
-		*fpga_ctrl |= LCD_CLK_08330 | CFG_FPGA_CTRL_OW_ENABLE;
+		*fpga_ctrl |= LCD_CLK_08330 | CONFIG_SYS_FPGA_CTRL_OW_ENABLE;
 
 		lcd_setup(0, 1);
-		lcd_init((uchar *)CFG_LCD_SMALL_REG, (uchar *)CFG_LCD_SMALL_MEM,
+		lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
 			 regs_13704_320_240_4bpp,
 			 sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
 			 logo_bmp_320, sizeof(logo_bmp_320));
@@ -647,27 +647,27 @@ int checkboard (void)
 void ide_set_reset(int on)
 {
 	volatile unsigned short *fpga_mode =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
 	volatile unsigned short *fpga_status =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 2);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 2);
 
-	if (((gd->board_type >= 2) && (*fpga_status & CFG_FPGA_STATUS_CF_DETECT)) ||
+	if (((gd->board_type >= 2) && (*fpga_status & CONFIG_SYS_FPGA_STATUS_CF_DETECT)) ||
 	    (gd->board_type < 2)) {
 		/*
 		 * Assert or deassert CompactFlash Reset Pin
 		 */
 		if (on) {		/* assert RESET */
 			cf_enable();
-			*fpga_mode &= ~(CFG_FPGA_CTRL_CF_RESET);
+			*fpga_mode &= ~(CONFIG_SYS_FPGA_CTRL_CF_RESET);
 		} else {		/* release RESET */
-			*fpga_mode |= CFG_FPGA_CTRL_CF_RESET;
+			*fpga_mode |= CONFIG_SYS_FPGA_CTRL_CF_RESET;
 		}
 	}
 }
 #endif /* CONFIG_IDE_RESET */
 
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 /* Input: <dev_addr>  I2C address of EEPROM device to enable.
  *         <state>     -1: deliver current state
  *	               0: disable write
@@ -678,23 +678,23 @@ void ide_set_reset(int on)
  */
 int eeprom_write_enable (unsigned dev_addr, int state)
 {
-	if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+	if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
 		return -1;
 	} else {
 		switch (state) {
 		case 1:
 			/* Enable write access, clear bit GPIO_SINT2. */
-			out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_EEPROM_WP);
+			out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		case 0:
 			/* Disable write access, set bit GPIO_SINT2. */
-			out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
+			out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		default:
 			/* Read current status back. */
-			state = (0 == (in32(GPIO0_OR) & CFG_EEPROM_WP));
+			state = (0 == (in32(GPIO0_OR) & CONFIG_SYS_EEPROM_WP));
 			break;
 		}
 	}
@@ -708,21 +708,21 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (query) {
 		/* Query write access state. */
-		state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+		state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
 		if (state < 0) {
 			puts ("Query of write access state failed.\n");
 		} else {
 			printf ("Write access for device 0x%0x is %sabled.\n",
-				CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+				CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
 			state = 0;
 		}
 	} else {
 		if ('0' == argv[1][0]) {
 			/* Disable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
 		} else {
 			/* Enable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
 		}
 		if (state < 0) {
 			puts ("Setup of write access state failed.\n");
@@ -735,7 +735,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(eepwren,	2,	0,	do_eep_wren,
 	   "eepwren - Enable / disable / query EEPROM write access\n",
 	   NULL);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
 
 
 #ifdef CONFIG_VIDEO_SM501
diff --git a/board/esd/hub405/flash.c b/board/esd/hub405/flash.c
index 89af1190a8a..274ada9fe5c 100644
--- a/board/esd/hub405/flash.c
+++ b/board/esd/hub405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/hub405/hub405.c b/board/esd/hub405/hub405.c
index 38a6f7a4e10..8785e6c84f3 100644
--- a/board/esd/hub405/hub405.c
+++ b/board/esd/hub405/hub405.c
@@ -125,23 +125,23 @@ int misc_init_r (void)
 	 * Set RS232/RS422 control (RS232 = high on GPIO)
 	 */
 	val = in32(GPIO0_OR);
-	val &= ~(CFG_UART2_RS232 | CFG_UART3_RS232 | CFG_UART4_RS232 | CFG_UART5_RS232);
+	val &= ~(CONFIG_SYS_UART2_RS232 | CONFIG_SYS_UART3_RS232 | CONFIG_SYS_UART4_RS232 | CONFIG_SYS_UART5_RS232);
 
 	str = getenv("phys0");
 	if (!str || (str && (str[0] == '0')))
-		val |= CFG_UART2_RS232;
+		val |= CONFIG_SYS_UART2_RS232;
 
 	str = getenv("phys1");
 	if (!str || (str && (str[0] == '0')))
-		val |= CFG_UART3_RS232;
+		val |= CONFIG_SYS_UART3_RS232;
 
 	str = getenv("phys2");
 	if (!str || (str && (str[0] == '0')))
-		val |= CFG_UART4_RS232;
+		val |= CONFIG_SYS_UART4_RS232;
 
 	str = getenv("phys3");
 	if (!str || (str && (str[0] == '0')))
-		val |= CFG_UART5_RS232;
+		val |= CONFIG_SYS_UART5_RS232;
 
 	out32(GPIO0_OR, val);
 
@@ -174,9 +174,9 @@ int misc_init_r (void)
 	/*
 	 * Reset external DUARTs
 	 */
-	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
+	out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_DUART_RST); /* set reset to high */
 	udelay(10); /* wait 10us */
-	out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_DUART_RST); /* set reset to low */
 	udelay(1000); /* wait 1ms */
 
 	/*
diff --git a/board/esd/mecp5200/mecp5200.c b/board/esd/mecp5200/mecp5200.c
index ff44abdac5b..31924502e41 100644
--- a/board/esd/mecp5200/mecp5200.c
+++ b/board/esd/mecp5200/mecp5200.c
@@ -81,7 +81,7 @@ static void sdram_start(int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *            is something else than 0x00000000.
  */
 
@@ -106,9 +106,9 @@ phys_size_t initdram(int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size(CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size(CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x80000000);
 
 	if (test1 > test2) {
 		sdram_start(0);
@@ -143,9 +143,9 @@ phys_size_t initdram(int board_type)
 #if 0
 	/* find RAM size using SDRAM CS1 only */
 	sdram_start(0);
-	get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	sdram_start(1);
-	get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	sdram_start(0);
 #endif
 	/* set SDRAM CS1 size according to the amount of RAM found */
@@ -175,14 +175,14 @@ void flash_preinit(void)
 
 void flash_afterinit(ulong size)
 {
-	if (size == CFG_FLASH_SIZE) {
+	if (size == CONFIG_SYS_FLASH_SIZE) {
 		/* adjust mapping */
 		*(vu_long *) MPC5XXX_BOOTCS_START =
 		    *(vu_long *) MPC5XXX_CS0_START =
-		    START_REG(CFG_BOOTCS_START | size);
+		    START_REG(CONFIG_SYS_BOOTCS_START | size);
 		*(vu_long *) MPC5XXX_BOOTCS_STOP =
 		    *(vu_long *) MPC5XXX_CS0_STOP =
-		    STOP_REG(CFG_BOOTCS_START | size, size);
+		    STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
 	}
 }
 
diff --git a/board/esd/ocrtc/flash.c b/board/esd/ocrtc/flash.c
index c3d8bec9137..e763a895ea4 100644
--- a/board/esd/ocrtc/flash.c
+++ b/board/esd/ocrtc/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
diff --git a/board/esd/pci405/flash.c b/board/esd/pci405/flash.c
index 3b21781d7df..90584838008 100644
--- a/board/esd/pci405/flash.c
+++ b/board/esd/pci405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c
index f8d7c28b839..4db70521b8e 100644
--- a/board/esd/pci405/pci405.c
+++ b/board/esd/pci405/pci405.c
@@ -57,11 +57,11 @@ const unsigned char fpgadata[] =
  */
 #include "../common/fpga.c"
 
-#define FPGA_DONE_STATE_V11 (in32(GPIO0_IR) & CFG_FPGA_DONE)
-#define FPGA_DONE_STATE_V12 (in32(GPIO0_IR) & CFG_FPGA_DONE_V12)
+#define FPGA_DONE_STATE_V11 (in32(GPIO0_IR) & CONFIG_SYS_FPGA_DONE)
+#define FPGA_DONE_STATE_V12 (in32(GPIO0_IR) & CONFIG_SYS_FPGA_DONE_V12)
 
-#define FPGA_INIT_STATE_V11 (in32(GPIO0_IR) & CFG_FPGA_INIT)
-#define FPGA_INIT_STATE_V12 (in32(GPIO0_IR) & CFG_FPGA_INIT_V12)
+#define FPGA_INIT_STATE_V11 (in32(GPIO0_IR) & CONFIG_SYS_FPGA_INIT)
+#define FPGA_INIT_STATE_V12 (in32(GPIO0_IR) & CONFIG_SYS_FPGA_INIT_V12)
 
 
 int board_revision(void)
@@ -138,8 +138,8 @@ int board_early_init_f (void)
 	 * First pull fpga-prg pin low, to disable fpga logic (on version 1.2 board)
 	 */
 	out32(GPIO0_ODR, 0x00000000);        /* no open drain pins      */
-	out32(GPIO0_TCR, CFG_FPGA_PRG);      /* setup for output        */
-	out32(GPIO0_OR,  CFG_FPGA_PRG);      /* set output pins to high */
+	out32(GPIO0_TCR, CONFIG_SYS_FPGA_PRG);      /* setup for output        */
+	out32(GPIO0_OR,  CONFIG_SYS_FPGA_PRG);      /* set output pins to high */
 	out32(GPIO0_OR, 0);                  /* pull prg low            */
 
 	/*
@@ -205,8 +205,8 @@ int misc_init_r (void)
 	 * FPGA can be gzip compressed (malloc) and booted this late.
 	 */
 
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf ("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset (NULL, 0, 0, NULL);
 	}
diff --git a/board/esd/pf5200/flash.c b/board/esd/pf5200/flash.c
index 8178b56ce74..9850445465c 100644
--- a/board/esd/pf5200/flash.c
+++ b/board/esd/pf5200/flash.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
 
 typedef unsigned short FLASH_PORT_WIDTH;
 typedef volatile unsigned short FLASH_PORT_WIDTHV;
@@ -60,7 +60,7 @@ unsigned long flash_init(void)
 	extern void flash_preinit(void);
 	extern void flash_afterinit(uint, ulong, ulong);
 
-	ulong flashbase = CFG_FLASH_BASE;
+	ulong flashbase = CONFIG_SYS_FLASH_BASE;
 
 	flash_preinit();
 
@@ -69,11 +69,11 @@ unsigned long flash_init(void)
 	flash_info[i].size = flash_get_size((FPW *) flashbase, &flash_info[i]);
 	size += flash_info[i].size;
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE + monitor_flash_len - 1,
-		      flash_get_info(CFG_MONITOR_BASE));
+	flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
+		      flash_get_info(CONFIG_SYS_MONITOR_BASE));
 #endif
 
 #ifdef  CONFIG_ENV_IS_IN_FLASH
@@ -107,14 +107,14 @@ static flash_info_t *flash_get_info(ulong base) {
 	int i;
 	flash_info_t *info;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		info = &flash_info[i];
 		if ((info->size) && (info->start[0] <= base)
 		    && (base <= info->start[0] + info->size - 1)) {
 			break;
 		}
 	}
-	return (i == CFG_MAX_FLASH_BANKS ? 0 : info);
+	return (i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info);
 }
 
 /*-----------------------------------------------------------------------
@@ -336,7 +336,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) {
 		udelay(1000);
 
 		while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
-			if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf("Timeout\n");
 				if (intel) {
 					/* suspend erase        */
@@ -347,14 +347,14 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) {
 				break;
 			}
 			/* show that we're waiting */
-			if ((get_timer(last)) > CFG_HZ) {
+			if ((get_timer(last)) > CONFIG_SYS_HZ) {
 				/* every second */
 				putc('.');
 				last = get_timer(0);
 			}
 		}
 		/* show that we're waiting */
-		if ((get_timer(last)) > CFG_HZ) {
+		if ((get_timer(last)) > CONFIG_SYS_HZ) {
 			/* every second */
 			putc('.');
 			last = get_timer(0);
@@ -452,7 +452,7 @@ static int write_word_amd(flash_info_t * info, FPWV * dest, FPW data) {
 	/* data polling for D7 */
 	while (res == 0
 	       && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dest = (FPW) 0x00F000F0;	/* reset bank */
 			res = 1;
 		}
diff --git a/board/esd/pf5200/pf5200.c b/board/esd/pf5200/pf5200.c
index c4c0221d02f..f7962afa5c3 100644
--- a/board/esd/pf5200/pf5200.c
+++ b/board/esd/pf5200/pf5200.c
@@ -81,7 +81,7 @@ static void sdram_start(int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *            is something else than 0x00000000.
  */
 
@@ -106,9 +106,9 @@ phys_size_t initdram(int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size((long *) CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *) CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x80000000);
 
 	if (test1 > test2) {
 		sdram_start(0);
@@ -144,9 +144,9 @@ phys_size_t initdram(int board_type)
 #if 0
 	/* find RAM size using SDRAM CS1 only */
 	sdram_start(0);
-	get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	sdram_start(1);
-	get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	sdram_start(0);
 #endif
 	/* set SDRAM CS1 size according to the amount of RAM found */
@@ -180,10 +180,10 @@ void flash_afterinit(ulong size)
 		/* adjust mapping */
 		*(vu_long *) MPC5XXX_BOOTCS_START =
 		    *(vu_long *) MPC5XXX_CS0_START =
-		    START_REG(CFG_BOOTCS_START | size);
+		    START_REG(CONFIG_SYS_BOOTCS_START | size);
 		*(vu_long *) MPC5XXX_BOOTCS_STOP =
 		    *(vu_long *) MPC5XXX_CS0_STOP =
-		    STOP_REG(CFG_BOOTCS_START | size, size);
+		    STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
 	}
 }
 
@@ -258,10 +258,10 @@ void init_power_switch(void)
 		*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT |= GPIO_USB0;
 		__asm__ volatile ("sync");
 	}
-	*(vu_char *) CFG_CS1_START = 0x02;	/* Red Power LED on */
+	*(vu_char *) CONFIG_SYS_CS1_START = 0x02;	/* Red Power LED on */
 	__asm__ volatile ("sync");
 
-	*(vu_char *) (CFG_CS1_START + 1) = 0x02;	/* Disable driver for KB11 */
+	*(vu_char *) (CONFIG_SYS_CS1_START + 1) = 0x02;	/* Disable driver for KB11 */
 	__asm__ volatile ("sync");
 }
 
diff --git a/board/esd/plu405/flash.c b/board/esd/plu405/flash.c
index 89af1190a8a..274ada9fe5c 100644
--- a/board/esd/plu405/flash.c
+++ b/board/esd/plu405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c
index 3db9c0ad100..61186a8d7c3 100644
--- a/board/esd/plu405/plu405.c
+++ b/board/esd/plu405/plu405.c
@@ -113,8 +113,8 @@ int misc_init_r (void)
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
 	gd->bd->bi_flashoffset = 0;
 
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf ("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset (NULL, 0, 0, NULL);
 	}
@@ -179,23 +179,23 @@ int misc_init_r (void)
 	/*
 	 * Reset external DUARTs
 	 */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_DUART_RST);
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_DUART_RST);
 	udelay(10);
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_DUART_RST);
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_DUART_RST);
 	udelay(1000);
 
 	/*
 	 * Set NAND-FLASH GPIO signals to default
 	 */
 	out_be32((void*)GPIO0_OR,
-		 in_be32((void*)GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_NAND_CE);
+		 in_be32((void*)GPIO0_OR) & ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE));
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_NAND_CE);
 
 	/*
 	 * Setup EEPROM write protection
 	 */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
-	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CFG_EEPROM_WP);
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
+	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CONFIG_SYS_EEPROM_WP);
 
 	/*
 	 * Enable interrupts in exar duart mcr[3]
@@ -230,15 +230,15 @@ int checkboard (void)
 void ide_set_reset(int on)
 {
 	volatile unsigned short *fpga_mode =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
 
 	/*
 	 * Assert or deassert CompactFlash Reset Pin
 	 */
 	if (on) {		/* assert RESET */
-		*fpga_mode &= ~(CFG_FPGA_CTRL_CF_RESET);
+		*fpga_mode &= ~(CONFIG_SYS_FPGA_CTRL_CF_RESET);
 	} else {		/* release RESET */
-		*fpga_mode |= CFG_FPGA_CTRL_CF_RESET;
+		*fpga_mode |= CONFIG_SYS_FPGA_CTRL_CF_RESET;
 	}
 }
 #endif /* CONFIG_IDE_RESET */
@@ -254,7 +254,7 @@ void reset_phy(void)
 #endif
 }
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 /* Input: <dev_addr>  I2C address of EEPROM device to enable.
  *         <state>     -1: deliver current state
  *	               0: disable write
@@ -265,26 +265,26 @@ void reset_phy(void)
  */
 int eeprom_write_enable (unsigned dev_addr, int state)
 {
-	if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+	if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
 		return -1;
 	} else {
 		switch (state) {
 		case 1:
 			/* Enable write access, clear bit GPIO0. */
 			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) & ~CFG_EEPROM_WP);
+				 in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		case 0:
 			/* Disable write access, set bit GPIO0. */
 			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
+				 in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		default:
 			/* Read current status back. */
 			state = (0 == (in_be32((void*)GPIO0_OR) &
-				       CFG_EEPROM_WP));
+				       CONFIG_SYS_EEPROM_WP));
 			break;
 		}
 	}
@@ -298,21 +298,21 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (query) {
 		/* Query write access state. */
-		state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+		state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
 		if (state < 0) {
 			puts ("Query of write access state failed.\n");
 		} else {
 			printf ("Write access for device 0x%0x is %sabled.\n",
-				CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+				CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
 			state = 0;
 		}
 	} else {
 		if ('0' == argv[1][0]) {
 			/* Disable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
 		} else {
 			/* Enable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
 		}
 		if (state < 0) {
 			puts ("Setup of write access state failed.\n");
@@ -325,4 +325,4 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(eepwren,	2,	0,	do_eep_wren,
 	   "eepwren - Enable / disable / query EEPROM write access\n",
 	   NULL);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c
index 90a212b8c43..c0781dc950e 100644
--- a/board/esd/pmc405/pmc405.c
+++ b/board/esd/pmc405/pmc405.c
@@ -72,23 +72,23 @@ int board_early_init_f (void)
 	 * Setup GPIO pins
 	 */
 
-	mtdcr(cntrl0, mfdcr(cntrl0) | ((CFG_FPGA_INIT | \
-					CFG_FPGA_DONE | \
-					CFG_XEREADY | \
-					CFG_NONMONARCH | \
-					CFG_REV1_2) << 5));
+	mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_FPGA_INIT | \
+					CONFIG_SYS_FPGA_DONE | \
+					CONFIG_SYS_XEREADY | \
+					CONFIG_SYS_NONMONARCH | \
+					CONFIG_SYS_REV1_2) << 5));
 
-	if (!(in32(GPIO0_IR) & CFG_REV1_2)) {
+	if (!(in32(GPIO0_IR) & CONFIG_SYS_REV1_2)) {
 		/* rev 1.2 boards */
-		mtdcr(cntrl0, mfdcr(cntrl0) | ((CFG_INTA_FAKE | \
-						CFG_SELF_RST) << 5));
+		mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_INTA_FAKE | \
+						CONFIG_SYS_SELF_RST) << 5));
 	}
 
 	out32(GPIO0_OR, 0);
-	out32(GPIO0_TCR, CFG_FPGA_PRG | CFG_FPGA_CLK | CFG_FPGA_DATA | CFG_XEREADY); /* setup for output */
+	out32(GPIO0_TCR, CONFIG_SYS_FPGA_PRG | CONFIG_SYS_FPGA_CLK | CONFIG_SYS_FPGA_DATA | CONFIG_SYS_XEREADY); /* setup for output */
 
 	/* - check if rev1_2 is low, then:
-	 * - set/reset CFG_INTA_FAKE/CFG_SELF_RST in TCR to assert INTA# or SELFRST#
+	 * - set/reset CONFIG_SYS_INTA_FAKE/CONFIG_SYS_SELF_RST in TCR to assert INTA# or SELFRST#
 	 */
 
 	return 0;
@@ -104,7 +104,7 @@ int misc_init_r (void)
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
 	gd->bd->bi_flashoffset = 0;
 
-	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_XEREADY); /* deassert EREADY# */
+	out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_XEREADY); /* deassert EREADY# */
 	return (0);
 }
 
@@ -112,13 +112,13 @@ ushort pmc405_pci_subsys_deviceid(void)
 {
 	ulong val;
 	val = in32(GPIO0_IR);
-	if (!(val & CFG_REV1_2)) { /* low=rev1.2 */
-		if (val & CFG_NONMONARCH) { /* monarch# signal */
-			return CFG_PCI_SUBSYS_DEVICEID_NONMONARCH;
+	if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */
+		if (val & CONFIG_SYS_NONMONARCH) { /* monarch# signal */
+			return CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH;
 		}
-		return CFG_PCI_SUBSYS_DEVICEID_MONARCH;
+		return CONFIG_SYS_PCI_SUBSYS_DEVICEID_MONARCH;
 	}
-	return CFG_PCI_SUBSYS_DEVICEID_NONMONARCH;
+	return CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH;
 }
 
 /*
@@ -140,9 +140,9 @@ int checkboard (void)
 	}
 
 	val = in32(GPIO0_IR);
-	if (!(val & CFG_REV1_2)) { /* low=rev1.2 */
+	if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */
 		puts(" rev1.2 (");
-		if (val & CFG_NONMONARCH) { /* monarch# signal */
+		if (val & CONFIG_SYS_NONMONARCH) { /* monarch# signal */
 			puts("non-");
 		}
 		puts("monarch)");
diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c
index 74cf4c3e15b..38ee74eb4bc 100644
--- a/board/esd/pmc440/cmd_pmc440.c
+++ b/board/esd/pmc440/cmd_pmc440.c
@@ -323,7 +323,7 @@ int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]
 	}
 
 	printf("Writing boot EEPROM ...\n");
-	if (bootstrap_eeprom_write(CFG_I2C_BOOT_EEPROM_ADDR,
+	if (bootstrap_eeprom_write(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR,
 				   0, (uchar*)sdsdp, count) != 0)
 		printf("bootstrap_eeprom_write failed\n");
 	else
@@ -513,7 +513,7 @@ U_BOOT_CMD(
 	"<pciaddr> (pciaddr will be aligned to 256MB)\n"
 	);
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	int query = argc == 1;
@@ -521,21 +521,21 @@ int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (query) {
 		/* Query write access state. */
-		state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, -1);
+		state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, -1);
 		if (state < 0) {
 			puts("Query of write access state failed.\n");
 		} else {
 			printf("Write access for device 0x%0x is %sabled.\n",
-			       CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+			       CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
 			state = 0;
 		}
 	} else {
 		if ('0' == argv[1][0]) {
 			/* Disable write access. */
-			state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 0);
+			state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 0);
 		} else {
 			/* Enable write access. */
-			state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 1);
+			state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 1);
 		}
 		if (state < 0) {
 			puts("Setup of write access state failed.\n");
@@ -547,6 +547,6 @@ int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
 	   "eepwren - Enable / disable / query EEPROM write access\n",
 	   NULL);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
 
 #endif /* CONFIG_CMD_BSP */
diff --git a/board/esd/pmc440/config.mk b/board/esd/pmc440/config.mk
index e62b8d30e41..0c4d58282e7 100644
--- a/board/esd/pmc440/config.mk
+++ b/board/esd/pmc440/config.mk
@@ -37,5 +37,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/esd/pmc440/init.S b/board/esd/pmc440/init.S
index 148af71bb53..26a8282cec0 100644
--- a/board/esd/pmc440/init.S
+++ b/board/esd/pmc440/init.S
@@ -44,28 +44,28 @@ tlbtab:
 	 * speed up boot process. It is patched after relocation to enable SA_I
 	 */
 #ifndef CONFIG_NAND_SPL
-	tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
+	tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
 #else
-	tlbentry( CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
+	tlbentry( CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
 #endif
 
 	/* TLB-entry for DDR SDRAM (Up to 2GB) */
 #ifdef CONFIG_4xx_DCACHE
-	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G)
+	tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G)
 #else
-	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
 #endif
 
-#ifdef CFG_INIT_RAM_DCACHE
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+	tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
 #endif
 
 	/* TLB-entry for PCI Memory */
-	tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
 
 	/* TLB-entries for EBC */
 	/* PMC440 maps EBC to 0xef000000 which is handled by the peripheral
@@ -76,7 +76,7 @@ tlbtab:
 	tlbentry( 0xc0000000, SZ_256M, 0xc0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
 
 	/* TLB-entry for NAND */
-	tlbentry( CFG_NAND_ADDR, SZ_1K, CFG_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_NAND_ADDR, SZ_1K, CONFIG_SYS_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
 
 	/* TLB-entry for Internal Registers & OCM */
 	tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0,  AC_R|AC_W|AC_X|SA_I )
@@ -98,8 +98,8 @@ tlbtab:
 	 * For NAND booting the first TLB has to be reconfigured to full size
 	 * and with caching disabled after running from RAM!
 	 */
-#define TLB00	TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
-#define TLB01	TLB1(CFG_BOOT_BASE_ADDR, 1)
+#define TLB00	TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M)
+#define TLB01	TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 1)
 #define TLB02	TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
 
 	.globl	reconfig_tlb0
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
index 85ef26f67be..013815e2659 100644
--- a/board/esd/pmc440/pmc440.c
+++ b/board/esd/pmc440/pmc440.c
@@ -44,7 +44,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 ulong flash_get_size(ulong base, int banknum);
 int pci_is_66mhz(void);
@@ -71,7 +71,7 @@ struct serial_device *default_serial_console(void)
 		/* mark scratchreg valid */
 		scratchreg = (scratchreg & 0xffffff00) | 0x80;
 
-		i = bootstrap_eeprom_read(CFG_I2C_BOOT_EEPROM_ADDR,
+		i = bootstrap_eeprom_read(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR,
 					  0x10, buf, 4);
 		if ((i != -1) && (buf[0] == 0x19) && (buf[1] == 0x75)) {
 			scratchreg |= buf[2];
@@ -103,7 +103,7 @@ int board_early_init_f(void)
 
 	/*
 	 * Setup the GPIO pins
-	 * TODO: setup GPIOs via CFG_4xx_GPIO_TABLE in board's config file
+	 * TODO: setup GPIOs via CONFIG_SYS_4xx_GPIO_TABLE in board's config file
 	 */
 	out32(GPIO0_OR,    0x40000002);
 	out32(GPIO0_TCR,   0x4c90011f);
@@ -190,7 +190,7 @@ int board_early_init_f(void)
 		SDR0_CUST0_NDFC_ENABLE		|
 		SDR0_CUST0_NDFC_BW_8_BIT	|
 		SDR0_CUST0_NDFC_ARE_MASK	|
-		(0x80000000 >> (28 + CFG_NAND_CS));
+		(0x80000000 >> (28 + CONFIG_SYS_NAND_CS));
 	mtsdr(SDR0_CUST0, sdr0_cust0);
 
 	return 0;
@@ -242,7 +242,7 @@ int misc_init_r(void)
 #ifdef CONFIG_ENV_IS_IN_FLASH
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
@@ -498,7 +498,7 @@ int pci_pre_init(struct pci_controller *hose)
  * inbound map (PIM). But the bootstrap config choices are limited and
  * may not be sufficient for a given board.
  */
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
 	char *ptmla_str, *ptmms_str;
@@ -516,8 +516,8 @@ void pci_target_init(struct pci_controller *hose)
 	 */
 	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute */
 						/* - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM0MA, 0xc0000001);	/* 1G + No prefetching, */
 						/* and enable region */
@@ -563,7 +563,7 @@ void pci_target_init(struct pci_controller *hose)
 
 	/* Program the board's vendor id */
 	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
-			      CFG_PCI_SUBSYS_VENDORID);
+			      CONFIG_SYS_PCI_SUBSYS_VENDORID);
 
 	/* disabled for PMC405 backward compatibility */
 	/* Configure command register as bus master */
@@ -581,9 +581,9 @@ void pci_target_init(struct pci_controller *hose)
 	if (!is_monarch()) {
 		/* Program the board's subsystem id/classcode */
 		pci_write_config_word(0, PCI_SUBSYSTEM_ID,
-				      CFG_PCI_SUBSYS_ID_NONMONARCH);
+				      CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH);
 		pci_write_config_word(0, PCI_CLASS_SUB_CODE,
-				      CFG_PCI_CLASSCODE_NONMONARCH);
+				      CONFIG_SYS_PCI_CLASSCODE_NONMONARCH);
 
 		/* PCI configuration done: release ERREADY */
 		out_be32((void*)GPIO1_OR,
@@ -593,17 +593,17 @@ void pci_target_init(struct pci_controller *hose)
 	} else {
 		/* Program the board's subsystem id/classcode */
 		pci_write_config_word(0, PCI_SUBSYSTEM_ID,
-				      CFG_PCI_SUBSYS_ID_MONARCH);
+				      CONFIG_SYS_PCI_SUBSYS_ID_MONARCH);
 		pci_write_config_word(0, PCI_CLASS_SUB_CODE,
-				      CFG_PCI_CLASSCODE_MONARCH);
+				      CONFIG_SYS_PCI_CLASSCODE_MONARCH);
 	}
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
 /*
  * pci_master_init
  */
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
 void pci_master_init(struct pci_controller *hose)
 {
 	unsigned short temp_short;
@@ -620,7 +620,7 @@ void pci_master_init(struct pci_controller *hose)
 				      PCI_COMMAND_MEMORY);
 	}
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */
 
 static void wait_for_pci_ready(void)
 {
@@ -708,7 +708,7 @@ void reset_phy(void)
 }
 #endif
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 /*
  *  Input: <dev_addr> I2C address of EEPROM device to enable.
  *         <state>    -1: deliver current state
@@ -720,8 +720,8 @@ void reset_phy(void)
  */
 int eeprom_write_enable(unsigned dev_addr, int state)
 {
-	if ((CFG_I2C_EEPROM_ADDR != dev_addr) &&
-	    (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr)) {
+	if ((CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) &&
+	    (CONFIG_SYS_I2C_BOOT_EEPROM_ADDR != dev_addr)) {
 		return -1;
 	} else {
 		switch (state) {
@@ -743,9 +743,9 @@ int eeprom_write_enable(unsigned dev_addr, int state)
 	}
 	return state;
 }
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
 
-#define CFG_BOOT_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS 3
 int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
 			   uchar *buffer, unsigned cnt)
 {
@@ -753,7 +753,7 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
 	unsigned blk_off;
 	int rcode = 0;
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 	eeprom_write_enable(dev_addr, 1);
 #endif
 	/*
@@ -776,7 +776,7 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
 
 		len = end - offset;
 
-#define	BOOT_EEPROM_PAGE_SIZE	   (1 << CFG_BOOT_EEPROM_PAGE_WRITE_BITS)
+#define	BOOT_EEPROM_PAGE_SIZE	   (1 << CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS)
 #define	BOOT_EEPROM_PAGE_OFFSET(x) ((x) & (BOOT_EEPROM_PAGE_SIZE - 1))
 
 		maxlen = BOOT_EEPROM_PAGE_SIZE -
@@ -793,11 +793,11 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
 		buffer += len;
 		offset += len;
 
-#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
-		udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
+		udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 #endif
 	}
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 	eeprom_write_enable(dev_addr, 0);
 #endif
 	return rcode;
@@ -845,7 +845,7 @@ int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset,
 	return rcode;
 }
 
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_BOARD_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT)
 int usb_board_init(void)
 {
 	char *act = getenv("usbact");
@@ -875,4 +875,4 @@ int usb_board_init_fail(void)
 	usb_board_stop();
 	return 0;
 }
-#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_BOARD_INIT) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) */
diff --git a/board/esd/pmc440/pmc440.h b/board/esd/pmc440/pmc440.h
index 7e70fd1cb70..d834f258571 100644
--- a/board/esd/pmc440/pmc440.h
+++ b/board/esd/pmc440/pmc440.h
@@ -54,7 +54,7 @@
 /*-----------------------------------------------------------------------
  * FPGA interface
  */
-#define FPGA_BA CFG_FPGA_BASE0
+#define FPGA_BA CONFIG_SYS_FPGA_BASE0
 #define FPGA_OUT32(p,v) out_be32(((void*)(p)), (v))
 #define FPGA_IN32(p) in_be32((void*)(p))
 #define FPGA_SETBITS(p,v) out_be32(((void*)(p)), in_be32((void*)(p)) | (v))
@@ -134,7 +134,7 @@ typedef struct pmc440_fpga_s pmc440_fpga_t;
 #define HOSTCTRL_HCINT_GATE  (1 <<  1)
 #define HOSTCTRL_HCINT_FLAG  (1 <<  0)
 
-#define NGCC_CTRL_BASE         (CFG_FPGA_BASE0 + 0x80000)
+#define NGCC_CTRL_BASE         (CONFIG_SYS_FPGA_BASE0 + 0x80000)
 #define NGCC_CTRL_FPGARST_N    (1 <<  2)
 
 /*-----------------------------------------------------------------------
diff --git a/board/esd/pmc440/sdram.c b/board/esd/pmc440/sdram.c
index c7294c99459..197857ad097 100644
--- a/board/esd/pmc440/sdram.c
+++ b/board/esd/pmc440/sdram.c
@@ -111,5 +111,5 @@ phys_size_t initdram (int board_type)
 	 */
 	set_mcsr(get_mcsr());
 
-	return (CFG_MBYTES_SDRAM << 20);
+	return (CONFIG_SYS_MBYTES_SDRAM << 20);
 }
diff --git a/board/esd/pmc440/u-boot.lds b/board/esd/pmc440/u-boot.lds
index b20fb1c0a28..3cfec834e2d 100644
--- a/board/esd/pmc440/u-boot.lds
+++ b/board/esd/pmc440/u-boot.lds
@@ -137,7 +137,7 @@ SECTIONS
    *(COMMON)
   }
 
-  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
 
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/tasreg/flash.c b/board/esd/tasreg/flash.c
index 13c07d2d33f..ce905e94c0e 100644
--- a/board/esd/tasreg/flash.c
+++ b/board/esd/tasreg/flash.c
@@ -45,13 +45,13 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* Static FLASH Bank configuration here - FIXME XXX */
 
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
@@ -65,8 +65,8 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    CFG_FLASH_BASE,
-			    CFG_FLASH_BASE+CFG_MONITOR_LEN-1,
+			    CONFIG_SYS_FLASH_BASE,
+			    CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-1,
 			    &flash_info[0]);
 
 	flash_info[0].size = size_b0;
diff --git a/board/esd/tasreg/tasreg.c b/board/esd/tasreg/tasreg.c
index fabb7464fde..64e6d632962 100644
--- a/board/esd/tasreg/tasreg.c
+++ b/board/esd/tasreg/tasreg.c
@@ -40,8 +40,8 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len);
 
 /* predefine these here for FPGA programming (before including fpga.c) */
 #define SET_FPGA(data)  mbar2_writeLong(MCFSIM_GPIO1_OUT, data)
-#define FPGA_DONE_STATE (mbar2_readLong(MCFSIM_GPIO1_READ) & CFG_FPGA_DONE)
-#define FPGA_INIT_STATE (mbar2_readLong(MCFSIM_GPIO1_READ) & CFG_FPGA_INIT)
+#define FPGA_DONE_STATE (mbar2_readLong(MCFSIM_GPIO1_READ) & CONFIG_SYS_FPGA_DONE)
+#define FPGA_INIT_STATE (mbar2_readLong(MCFSIM_GPIO1_READ) & CONFIG_SYS_FPGA_INIT)
 #define FPGA_PROG_ACTIVE_HIGH          /* on this platform is PROG active high!   */
 #define out32(a,b)                     /* nothing to do (gpio already configured) */
 
@@ -70,7 +70,7 @@ int checkboard (void) {
 	/*
 	 * Set LED on
 	 */
-	val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CFG_GPIO1_LED;
+	val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CONFIG_SYS_GPIO1_LED;
 	mbar2_writeLong(MCFSIM_GPIO1_OUT, val);   /* Set LED on */
 
 	return 0;
@@ -85,13 +85,13 @@ phys_size_t initdram (int board_type) {
 	 *	RC = ([(RefreshTime/#rows) / (1/BusClk)] / 16) - 1
 	 */
 
-#ifdef CFG_FAST_CLK
+#ifdef CONFIG_SYS_FAST_CLK
 	/*
 	 * Busclk=70MHz, RefreshTime=64ms, #rows=4096 (4K)
 	 * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=39
 	 */
 	mbar_writeShort(MCFSIM_DCR, 0x8239);
-#elif CFG_PLL_BYPASS
+#elif CONFIG_SYS_PLL_BYPASS
 	/*
 	 * Busclk=5.6448MHz, RefreshTime=64ms, #rows=8192 (8K)
 	 * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=02
@@ -129,7 +129,7 @@ phys_size_t initdram (int board_type) {
 	mbar_writeLong(MCFSIM_DACR0, 0x0000b364);  /* Enable DACR0[IMRS] (bit 6); RE remains enabled */
 	*((volatile unsigned long *) 0x800) = junk; /* Access RAM to initialize the mode register */
 
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 };
 
 
@@ -150,8 +150,8 @@ int misc_init_r (void)
 	int i;
 	uchar buf[8];
 
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf ("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset (NULL, 0, 0, NULL);
 	}
diff --git a/board/esd/voh405/flash.c b/board/esd/voh405/flash.c
index 89af1190a8a..274ada9fe5c 100644
--- a/board/esd/voh405/flash.c
+++ b/board/esd/voh405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c
index 115f8b4abff..ec65ffd4346 100644
--- a/board/esd/voh405/voh405.c
+++ b/board/esd/voh405/voh405.c
@@ -109,9 +109,9 @@ int misc_init_r (void)
 	unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
 	unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
 	unsigned short *lcd_contrast =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 4);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 4);
 	unsigned short *lcd_backlight =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 6);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 6);
 	unsigned char *dst;
 	ulong len = sizeof(fpgadata);
 	int status;
@@ -119,8 +119,8 @@ int misc_init_r (void)
 	int i;
 	char *str;
 
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf ("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset (NULL, 0, 0, NULL);
 	}
@@ -183,22 +183,22 @@ int misc_init_r (void)
 	/*
 	 * Reset external DUARTs
 	 */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_DUART_RST); /* set reset to high */
 	udelay(10); /* wait 10us */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_DUART_RST); /* set reset to low */
 	udelay(1000); /* wait 1ms */
 
 	/*
 	 * Set NAND-FLASH GPIO signals to default
 	 */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_NAND_CE);
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE));
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_NAND_CE);
 
 	/*
 	 * Setup EEPROM write protection
 	 */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
-	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CFG_EEPROM_WP);
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
+	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CONFIG_SYS_EEPROM_WP);
 
 	/*
 	 * Enable interrupts in exar duart mcr[3]
@@ -212,29 +212,29 @@ int misc_init_r (void)
 	str = getenv("bd_type");
 	if (strcmp(str, "voh405_bw") == 0) {
 		lcd_setup(0, 1);
-		lcd_init((uchar *)CFG_LCD_SMALL_REG, (uchar *)CFG_LCD_SMALL_MEM,
+		lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
 			 regs_13704_320_240_4bpp,
 			 sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
 			 logo_bmp_320, sizeof(logo_bmp_320));
 	} else if (strcmp(str, "voh405_bwbw") == 0) {
 		lcd_setup(0, 1);
-		lcd_init((uchar *)CFG_LCD_SMALL_REG, (uchar *)CFG_LCD_SMALL_MEM,
+		lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
 			 regs_13704_320_240_4bpp,
 			 sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
 			 logo_bmp_320, sizeof(logo_bmp_320));
 		lcd_setup(1, 1);
-		lcd_init((uchar *)CFG_LCD_BIG_REG, (uchar *)CFG_LCD_BIG_MEM,
+		lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
 			 regs_13806_320_240_4bpp,
 			 sizeof(regs_13806_320_240_4bpp)/sizeof(regs_13806_320_240_4bpp[0]),
 			 logo_bmp_320, sizeof(logo_bmp_320));
 	} else if (strcmp(str, "voh405_bwc") == 0) {
 		lcd_setup(0, 1);
-		lcd_init((uchar *)CFG_LCD_SMALL_REG, (uchar *)CFG_LCD_SMALL_MEM,
+		lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
 			 regs_13704_320_240_4bpp,
 			 sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
 			 logo_bmp_320, sizeof(logo_bmp_320));
 		lcd_setup(1, 0);
-		lcd_init((uchar *)CFG_LCD_BIG_REG, (uchar *)CFG_LCD_BIG_MEM,
+		lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
 			 regs_13806_640_480_16bpp,
 			 sizeof(regs_13806_640_480_16bpp)/sizeof(regs_13806_640_480_16bpp[0]),
 			 logo_bmp_640, sizeof(logo_bmp_640));
@@ -246,8 +246,8 @@ int misc_init_r (void)
 	/*
 	 * Set invert bit in small lcd controller
 	 */
-	out_8((unsigned char *)(CFG_LCD_SMALL_REG + 2),
-	      in_8((unsigned char *)(CFG_LCD_SMALL_REG + 2)) | 0x01);
+	out_8((unsigned char *)(CONFIG_SYS_LCD_SMALL_REG + 2),
+	      in_8((unsigned char *)(CONFIG_SYS_LCD_SMALL_REG + 2)) | 0x01);
 
 	/*
 	 * Set default contrast voltage on epson vga controller
@@ -262,7 +262,7 @@ int misc_init_r (void)
 	/*
 	 * Enable external I2C bus
 	 */
-	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CFG_IIC_ON);
+	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CONFIG_SYS_IIC_ON);
 
 	return (0);
 }
@@ -300,15 +300,15 @@ int checkboard (void)
 void ide_set_reset(int on)
 {
 	volatile unsigned short *fpga_mode =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
 
 	/*
 	 * Assert or deassert CompactFlash Reset Pin
 	 */
 	if (on) {		/* assert RESET */
-		*fpga_mode &= ~(CFG_FPGA_CTRL_CF_RESET);
+		*fpga_mode &= ~(CONFIG_SYS_FPGA_CTRL_CF_RESET);
 	} else {		/* release RESET */
-		*fpga_mode |= CFG_FPGA_CTRL_CF_RESET;
+		*fpga_mode |= CONFIG_SYS_FPGA_CTRL_CF_RESET;
 	}
 }
 #endif /* CONFIG_IDE_RESET */
@@ -326,7 +326,7 @@ void reset_phy(void)
 }
 #endif
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 /* Input: <dev_addr>  I2C address of EEPROM device to enable.
  *         <state>     -1: deliver current state
  *	               0: disable write
@@ -337,23 +337,23 @@ void reset_phy(void)
  */
 int eeprom_write_enable (unsigned dev_addr, int state)
 {
-	if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+	if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
 		return -1;
 	} else {
 		switch (state) {
 		case 1:
 			/* Enable write access, clear bit GPIO0. */
-			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_EEPROM_WP);
+			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		case 0:
 			/* Disable write access, set bit GPIO0. */
-			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
+			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		default:
 			/* Read current status back. */
-			state = (0 == (in_be32((void*)GPIO0_OR) & CFG_EEPROM_WP));
+			state = (0 == (in_be32((void*)GPIO0_OR) & CONFIG_SYS_EEPROM_WP));
 			break;
 		}
 	}
@@ -367,21 +367,21 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (query) {
 		/* Query write access state. */
-		state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+		state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
 		if (state < 0) {
 			puts ("Query of write access state failed.\n");
 		} else {
 			printf ("Write access for device 0x%0x is %sabled.\n",
-				CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+				CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
 			state = 0;
 		}
 	} else {
 		if ('0' == argv[1][0]) {
 			/* Disable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
 		} else {
 			/* Enable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
 		}
 		if (state < 0) {
 			puts ("Setup of write access state failed.\n");
@@ -394,4 +394,4 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(eepwren,	2,	0,	do_eep_wren,
 	   "eepwren - Enable / disable / query EEPROM write access\n",
 	   NULL);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/vom405/flash.c b/board/esd/vom405/flash.c
index 89af1190a8a..274ada9fe5c 100644
--- a/board/esd/vom405/flash.c
+++ b/board/esd/vom405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/wuh405/flash.c b/board/esd/wuh405/flash.c
index 89af1190a8a..274ada9fe5c 100644
--- a/board/esd/wuh405/flash.c
+++ b/board/esd/wuh405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/wuh405/wuh405.c b/board/esd/wuh405/wuh405.c
index 3a94fd86b27..5eca3bd380d 100644
--- a/board/esd/wuh405/wuh405.c
+++ b/board/esd/wuh405/wuh405.c
@@ -92,8 +92,8 @@ int misc_init_r (void)
 	int index;
 	int i;
 
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf ("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset (NULL, 0, 0, NULL);
 	}
@@ -155,9 +155,9 @@ int misc_init_r (void)
 	/*
 	 * Reset external DUARTs
 	 */
-	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
+	out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_DUART_RST); /* set reset to high */
 	udelay(10); /* wait 10us */
-	out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_DUART_RST); /* set reset to low */
 	udelay(1000); /* wait 1ms */
 
 	/*