Merge with git://www.denx.de/git/u-boot.git

1 files changed, 555 insertions, 0 deletions

diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
new file mode 100644
index 00000000000..460cb1b2753
--- /dev/null
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -0,0 +1,555 @@
+/*
+ * Copyright 2007 Freescale Semiconductor.
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
+#include <spd.h>
+#include <i2c.h>
+#include <ioports.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+#include "bcsr.h"
+
+const qe_iop_conf_t qe_iop_conf_tab[] = {
+	/* GETH1 */
+	{4, 10, 1, 0, 2}, /* TxD0 */
+	{4,  9, 1, 0, 2}, /* TxD1 */
+	{4,  8, 1, 0, 2}, /* TxD2 */
+	{4,  7, 1, 0, 2}, /* TxD3 */
+	{4, 23, 1, 0, 2}, /* TxD4 */
+	{4, 22, 1, 0, 2}, /* TxD5 */
+	{4, 21, 1, 0, 2}, /* TxD6 */
+	{4, 20, 1, 0, 2}, /* TxD7 */
+	{4, 15, 2, 0, 2}, /* RxD0 */
+	{4, 14, 2, 0, 2}, /* RxD1 */
+	{4, 13, 2, 0, 2}, /* RxD2 */
+	{4, 12, 2, 0, 2}, /* RxD3 */
+	{4, 29, 2, 0, 2}, /* RxD4 */
+	{4, 28, 2, 0, 2}, /* RxD5 */
+	{4, 27, 2, 0, 2}, /* RxD6 */
+	{4, 26, 2, 0, 2}, /* RxD7 */
+	{4, 11, 1, 0, 2}, /* TX_EN */
+	{4, 24, 1, 0, 2}, /* TX_ER */
+	{4, 16, 2, 0, 2}, /* RX_DV */
+	{4, 30, 2, 0, 2}, /* RX_ER */
+	{4, 17, 2, 0, 2}, /* RX_CLK */
+	{4, 19, 1, 0, 2}, /* GTX_CLK */
+	{1, 31, 2, 0, 3}, /* GTX125 */
+
+	/* GETH2 */
+	{5, 10, 1, 0, 2}, /* TxD0 */
+	{5,  9, 1, 0, 2}, /* TxD1 */
+	{5,  8, 1, 0, 2}, /* TxD2 */
+	{5,  7, 1, 0, 2}, /* TxD3 */
+	{5, 23, 1, 0, 2}, /* TxD4 */
+	{5, 22, 1, 0, 2}, /* TxD5 */
+	{5, 21, 1, 0, 2}, /* TxD6 */
+	{5, 20, 1, 0, 2}, /* TxD7 */
+	{5, 15, 2, 0, 2}, /* RxD0 */
+	{5, 14, 2, 0, 2}, /* RxD1 */
+	{5, 13, 2, 0, 2}, /* RxD2 */
+	{5, 12, 2, 0, 2}, /* RxD3 */
+	{5, 29, 2, 0, 2}, /* RxD4 */
+	{5, 28, 2, 0, 2}, /* RxD5 */
+	{5, 27, 2, 0, 3}, /* RxD6 */
+	{5, 26, 2, 0, 2}, /* RxD7 */
+	{5, 11, 1, 0, 2}, /* TX_EN */
+	{5, 24, 1, 0, 2}, /* TX_ER */
+	{5, 16, 2, 0, 2}, /* RX_DV */
+	{5, 30, 2, 0, 2}, /* RX_ER */
+	{5, 17, 2, 0, 2}, /* RX_CLK */
+	{5, 19, 1, 0, 2}, /* GTX_CLK */
+	{1, 31, 2, 0, 3}, /* GTX125 */
+	{4,  6, 3, 0, 2}, /* MDIO */
+	{4,  5, 1, 0, 2}, /* MDC */
+	{0,  0, 0, 0, QE_IOP_TAB_END}, /* END of table */
+};
+
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+extern long int spd_sdram(void);
+
+void local_bus_init(void);
+void sdram_init(void);
+
+int board_early_init_f (void)
+{
+	/*
+	 * Initialize local bus.
+	 */
+	local_bus_init ();
+
+	enable_8568mds_duart();
+	enable_8568mds_flash_write();
+#if defined(CONFIG_QE) && !defined(CONFIG_eTSEC_MDIO_BUS)
+	enable_8568mds_qe_mdio();
+#endif
+
+#ifdef CFG_I2C2_OFFSET
+	/* Enable I2C2_SCL and I2C2_SDA */
+	volatile struct par_io *port_c;
+	port_c = (struct par_io*)(CFG_IMMR + 0xe0140);
+	port_c->cpdir2 |= 0x0f000000;
+	port_c->cppar2 &= ~0x0f000000;
+	port_c->cppar2 |= 0x0a000000;
+#endif
+
+	return 0;
+}
+
+int checkboard (void)
+{
+	printf ("Board: 8568 MDS\n");
+
+	return 0;
+}
+
+long int
+initdram(int board_type)
+{
+	long dram_size = 0;
+
+	puts("Initializing\n");
+
+#if defined(CONFIG_DDR_DLL)
+	{
+		/*
+		 * Work around to stabilize DDR DLL MSYNC_IN.
+		 * Errata DDR9 seems to have been fixed.
+		 * This is now the workaround for Errata DDR11:
+		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
+		 */
+
+		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+
+		gur->ddrdllcr = 0x81000000;
+		asm("sync;isync;msync");
+		udelay(200);
+	}
+#endif
+	dram_size = spd_sdram();
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	/*
+	 * Initialize and enable DDR ECC.
+	 */
+	ddr_enable_ecc(dram_size);
+#endif
+	/*
+	 * SDRAM Initialization
+	 */
+	sdram_init();
+
+	puts("    DDR: ");
+	return dram_size;
+}
+
+/*
+ * Initialize Local Bus
+ */
+void
+local_bus_init(void)
+{
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+
+	uint clkdiv;
+	uint lbc_hz;
+	sys_info_t sysinfo;
+
+	get_sys_info(&sysinfo);
+	clkdiv = (lbc->lcrr & 0x0f) * 2;
+	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+
+	gur->lbiuiplldcr1 = 0x00078080;
+	if (clkdiv == 16) {
+		gur->lbiuiplldcr0 = 0x7c0f1bf0;
+	} else if (clkdiv == 8) {
+		gur->lbiuiplldcr0 = 0x6c0f1bf0;
+	} else if (clkdiv == 4) {
+		gur->lbiuiplldcr0 = 0x5c0f1bf0;
+	}
+
+	lbc->lcrr |= 0x00030000;
+
+	asm("sync;isync;msync");
+}
+
+/*
+ * Initialize SDRAM memory on the Local Bus.
+ */
+void
+sdram_init(void)
+{
+#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
+
+	uint idx;
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	uint lsdmr_common;
+
+	puts("    SDRAM: ");
+
+	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+
+	/*
+	 * Setup SDRAM Base and Option Registers
+	 */
+	lbc->or2 = CFG_OR2_PRELIM;
+	asm("msync");
+
+	lbc->br2 = CFG_BR2_PRELIM;
+	asm("msync");
+
+	lbc->lbcr = CFG_LBC_LBCR;
+	asm("msync");
+
+
+	lbc->lsrt = CFG_LBC_LSRT;
+	lbc->mrtpr = CFG_LBC_MRTPR;
+	asm("msync");
+
+	/*
+	 * MPC8568 uses "new" 15-16 style addressing.
+	 */
+	lsdmr_common = CFG_LBC_LSDMR_COMMON;
+	lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
+
+	/*
+	 * Issue PRECHARGE ALL command.
+	 */
+	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
+	asm("sync;msync");
+	*sdram_addr = 0xff;
+	ppcDcbf((unsigned long) sdram_addr);
+	udelay(100);
+
+	/*
+	 * Issue 8 AUTO REFRESH commands.
+	 */
+	for (idx = 0; idx < 8; idx++) {
+		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
+		asm("sync;msync");
+		*sdram_addr = 0xff;
+		ppcDcbf((unsigned long) sdram_addr);
+		udelay(100);
+	}
+
+	/*
+	 * Issue 8 MODE-set command.
+	 */
+	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
+	asm("sync;msync");
+	*sdram_addr = 0xff;
+	ppcDcbf((unsigned long) sdram_addr);
+	udelay(100);
+
+	/*
+	 * Issue NORMAL OP command.
+	 */
+	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
+	asm("sync;msync");
+	*sdram_addr = 0xff;
+	ppcDcbf((unsigned long) sdram_addr);
+	udelay(200);    /* Overkill. Must wait > 200 bus cycles */
+
+#endif	/* enable SDRAM init */
+}
+
+#if defined(CFG_DRAM_TEST)
+int
+testdram(void)
+{
+	uint *pstart = (uint *) CFG_MEMTEST_START;
+	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *p;
+
+	printf("Testing DRAM from 0x%08x to 0x%08x\n",
+	       CFG_MEMTEST_START,
+	       CFG_MEMTEST_END);
+
+	printf("DRAM test phase 1:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf ("DRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("DRAM test phase 2:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf ("DRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("DRAM test passed.\n");
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_PCI)
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_mpc8568mds_config_table[] = {
+	{
+	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+	 pci_cfgfunc_config_device,
+	 {PCI_ENET0_IOADDR,
+	  PCI_ENET0_MEMADDR,
+	  PCI_COMMON_MEMORY | PCI_COMMAND_MASTER}
+	 },
+	{}
+};
+#endif
+
+static struct pci_controller pci1_hose = {
+#ifndef CONFIG_PCI_PNP
+	config_table: pci_mpc8568mds_config_table,
+#endif
+};
+#endif	/* CONFIG_PCI */
+
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif  /* CONFIG_PCIE1 */
+
+int first_free_busno = 0;
+
+/*
+ * pib_init() -- Initialize the PCA9555 IO expander on the PIB board
+ */
+void
+pib_init(void)
+{
+	u8 val8, orig_i2c_bus;
+	/*
+	 * Assign PIB PMC2/3 to PCI bus
+	 */
+
+	/*switch temporarily to I2C bus #2 */
+	orig_i2c_bus = i2c_get_bus_num();
+	i2c_set_bus_num(1);
+
+	val8 = 0x00;
+	i2c_write(0x23, 0x6, 1, &val8, 1);
+	i2c_write(0x23, 0x7, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x23, 0x2, 1, &val8, 1);
+	i2c_write(0x23, 0x3, 1, &val8, 1);
+
+	val8 = 0x00;
+	i2c_write(0x26, 0x6, 1, &val8, 1);
+	val8 = 0x34;
+	i2c_write(0x26, 0x7, 1, &val8, 1);
+	val8 = 0xf9;
+	i2c_write(0x26, 0x2, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x26, 0x3, 1, &val8, 1);
+
+	val8 = 0x00;
+	i2c_write(0x27, 0x6, 1, &val8, 1);
+	i2c_write(0x27, 0x7, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x27, 0x2, 1, &val8, 1);
+	val8 = 0xef;
+	i2c_write(0x27, 0x3, 1, &val8, 1);
+
+	asm("eieio");
+}
+
+#ifdef CONFIG_PCI
+void
+pci_init_board(void)
+{
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+
+#ifdef CONFIG_PCI1
+{
+	pib_init();
+
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pci1_hose;
+
+	uint pci_32 = 1;      /* PORDEVSR[15] */
+	uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;       /* PORDEVSR[14] */
+	uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;   /* PORPLLSR[16] */
+
+	uint pci_agent = (host_agent == 3) || (host_agent == 4 ) || (host_agent == 6);
+
+	uint pci_speed = 66666000;
+
+	if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) {
+		printf ("    PCI: %d bit, %s MHz, %s, %s, %s\n",
+			(pci_32) ? 32 : 64,
+			(pci_speed == 33333000) ? "33" :
+			(pci_speed == 66666000) ? "66" : "unknown",
+			pci_clk_sel ? "sync" : "async",
+			pci_agent ? "agent" : "host",
+			pci_arb ? "arbiter" : "external-arbiter"
+			);
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+				CFG_PCI_MEMORY_BUS,
+				CFG_PCI_MEMORY_PHYS,
+				CFG_PCI_MEMORY_SIZE,
+				PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+				CFG_PCI1_MEM_BASE,
+				CFG_PCI1_MEM_PHYS,
+				CFG_PCI1_MEM_SIZE,
+				PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+				CFG_PCI1_IO_BASE,
+				CFG_PCI1_IO_PHYS,
+				CFG_PCI1_IO_SIZE,
+				PCI_REGION_IO);
+
+		hose->region_count = 3;
+
+		hose->first_busno = first_free_busno;
+		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+		first_free_busno = hose->last_busno+1;
+		printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
+	} else {
+	printf ("    PCI: disabled\n");
+	}
+}
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+#endif
+
+#ifdef CONFIG_PCIE1
+{
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pcie1_hose;
+	int pcie_ep =  (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3);
+
+	int pcie_configured  = io_sel >= 1;
+
+	if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
+		printf ("\n    PCIE connected to slot as %s (base address %x)",
+			pcie_ep ? "End Point" : "Root Complex",
+			(uint)pci);
+
+		if (pci->pme_msg_det) {
+			pci->pme_msg_det = 0xffffffff;
+			debug (" with errors.  Clearing.  Now 0x%08x",pci->pme_msg_det);
+		}
+		printf ("\n");
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+				CFG_PCI_MEMORY_BUS,
+				CFG_PCI_MEMORY_PHYS,
+				CFG_PCI_MEMORY_SIZE,
+				PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+				CFG_PCIE1_MEM_BASE,
+				CFG_PCIE1_MEM_PHYS,
+				CFG_PCIE1_MEM_SIZE,
+				PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+				CFG_PCIE1_IO_BASE,
+				CFG_PCIE1_IO_PHYS,
+				CFG_PCIE1_IO_SIZE,
+				PCI_REGION_IO);
+
+		hose->region_count = 3;
+
+		hose->first_busno=first_free_busno;
+		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+		printf ("PCIE on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
+
+		first_free_busno=hose->last_busno+1;
+
+	} else {
+		printf ("    PCIE: disabled\n");
+	}
+}
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+#endif
+}
+#endif /* CONFIG_PCI */
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+	int node, tmp[2];
+	const char *path;
+
+	ft_cpu_setup(blob, bd);
+
+	node = fdt_path_offset(blob, "/aliases");
+	tmp[0] = 0;
+	if (node >= 0) {
+#ifdef CONFIG_PCI1
+		path = fdt_getprop(blob, node, "pci0", NULL);
+		if (path) {
+			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
+#endif
+#ifdef CONFIG_PCIE1
+		path = fdt_getprop(blob, node, "pci1", NULL);
+		if (path) {
+			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
+#endif
+	}
+}
+#endif