Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

3 files changed, 233 insertions, 3 deletions

diff --git a/board/freescale/mx28evk/README b/board/freescale/mx28evk/README
index 0389a1d86c7..958ebc67910 100644
--- a/board/freescale/mx28evk/README
+++ b/board/freescale/mx28evk/README
@@ -23,11 +23,19 @@ To boot MX28EVK from an SD card, set the boot mode DIP switches as:
    * VDD 5V: To the left (off)
    * Hold Button: Down (off)
 
+To boot MX28EVK from SPI NOR flash, set the boot mode DIP switches as:
+
+   * Boot Mode Select: 0 0 1 0 (Boot from SSP2)
+   * JTAG PSWITCH RESET: To the right (reset disabled)
+   * Battery Source: Down
+   * Wall 5V: Up
+   * VDD 5V: To the left (off)
+   * Hold Button: Down (off)
 
 Environment Storage
 -------------------
 
-There are two targets for mx28evk:
+There are three targets for mx28evk:
 
 "make mx28evk_config"		- store environment variables into MMC
 
@@ -35,12 +43,20 @@ or
 
 "make mx28evk_nand_config"	- store environment variables into NAND flash
 
+or
+
+"make mx28evk_spi_config"       - store enviroment variables into SPI NOR flash
+
 Choose the target accordingly.
 
 Note: The mx28evk board does not come with a NAND flash populated from the
 factory. It comes with an empty slot (U23), which allows the insertion of a
 48-pin TSOP flash device.
 
-Follow the instructions from doc/README.mxs to generate a bootable SD card.
+mx28evk does not come with SPI NOR flash populated from the factory either.
+It is possible to solder a SOIC memory on U49 or use a DIP8 on J89.
+To get SPI communication to work R320, R321,R322 and C178 need to be populated.
+Look in the schematics for the proper component values.
 
-Insert the SD card in slot 0, power up the board and U-boot will boot.
+Follow the instructions from doc/README.mxs to generate a bootable SD card or
+to generate a binary to be flashed into SPI NOR.
diff --git a/board/freescale/mx6qsabreauto/mx6dl.cfg b/board/freescale/mx6qsabreauto/mx6dl.cfg
new file mode 100644
index 00000000000..89078e56532
--- /dev/null
+++ b/board/freescale/mx6qsabreauto/mx6dl.cfg
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ * Jason Liu <r64343@freescale.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM	sd
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+DATA 4 0x020e0774 0x000C0000
+DATA 4 0x020e0754 0x00000000
+DATA 4 0x020e04ac 0x00000030
+DATA 4 0x020e04b0 0x00000030
+DATA 4 0x020e0464 0x00000030
+DATA 4 0x020e0490 0x00000030
+DATA 4 0x020e074c 0x00000030
+DATA 4 0x020e0494 0x00000030
+DATA 4 0x020e04a0 0x00000000
+DATA 4 0x020e04b4 0x00000030
+DATA 4 0x020e04b8 0x00000030
+DATA 4 0x020e076c 0x00000030
+DATA 4 0x020e0750 0x00020000
+DATA 4 0x020e04bc 0x00000028
+DATA 4 0x020e04c0 0x00000028
+DATA 4 0x020e04c4 0x00000028
+DATA 4 0x020e04c8 0x00000028
+DATA 4 0x020e04cc 0x00000028
+DATA 4 0x020e04d0 0x00000028
+DATA 4 0x020e04d4 0x00000028
+DATA 4 0x020e04d8 0x00000028
+DATA 4 0x020e0760 0x00020000
+DATA 4 0x020e0764 0x00000028
+DATA 4 0x020e0770 0x00000028
+DATA 4 0x020e0778 0x00000028
+DATA 4 0x020e077c 0x00000028
+DATA 4 0x020e0780 0x00000028
+DATA 4 0x020e0784 0x00000028
+DATA 4 0x020e078c 0x00000028
+DATA 4 0x020e0748 0x00000028
+DATA 4 0x020e0470 0x00000028
+DATA 4 0x020e0474 0x00000028
+DATA 4 0x020e0478 0x00000028
+DATA 4 0x020e047c 0x00000028
+DATA 4 0x020e0480 0x00000028
+DATA 4 0x020e0484 0x00000028
+DATA 4 0x020e0488 0x00000028
+DATA 4 0x020e048c 0x00000028
+DATA 4 0x021b0800 0xa1390003
+DATA 4 0x021b080c 0x001F001F
+DATA 4 0x021b0810 0x001F001F
+DATA 4 0x021b480c 0x001F001F
+DATA 4 0x021b4810 0x001F001F
+DATA 4 0x021b083c 0x42190217
+DATA 4 0x021b0840 0x017B017B
+DATA 4 0x021b483c 0x4176017B
+DATA 4 0x021b4840 0x015F016C
+DATA 4 0x021b0848 0x4C4C4D4C
+DATA 4 0x021b4848 0x4A4D4C48
+DATA 4 0x021b0850 0x3F3F3F40
+DATA 4 0x021b4850 0x3538382E
+DATA 4 0x021b081c 0x33333333
+DATA 4 0x021b0820 0x33333333
+DATA 4 0x021b0824 0x33333333
+DATA 4 0x021b0828 0x33333333
+DATA 4 0x021b481c 0x33333333
+DATA 4 0x021b4820 0x33333333
+DATA 4 0x021b4824 0x33333333
+DATA 4 0x021b4828 0x33333333
+DATA 4 0x021b08b8 0x00000800
+DATA 4 0x021b48b8 0x00000800
+DATA 4 0x021b0004 0x00020025
+DATA 4 0x021b0008 0x00333030
+DATA 4 0x021b000c 0x676B5313
+DATA 4 0x021b0010 0xB66E8B63
+DATA 4 0x021b0014 0x01FF00DB
+DATA 4 0x021b0018 0x00001740
+DATA 4 0x021b001c 0x00008000
+DATA 4 0x021b002c 0x000026d2
+DATA 4 0x021b0030 0x006B1023
+DATA 4 0x021b0040 0x00000047
+DATA 4 0x021b0000 0x841A0000
+DATA 4 0x021b001c 0x04008032
+DATA 4 0x021b001c 0x00008033
+DATA 4 0x021b001c 0x00048031
+DATA 4 0x021b001c 0x05208030
+DATA 4 0x021b001c 0x04008040
+DATA 4 0x021b0020 0x00005800
+DATA 4 0x021b0818 0x00011117
+DATA 4 0x021b4818 0x00011117
+DATA 4 0x021b0004 0x00025565
+DATA 4 0x021b0404 0x00011006
+DATA 4 0x021b001c 0x00000000
+
+/* set the default clock gate to save power */
+DATA 4 0x020c4068 0x00C03F3F
+DATA 4 0x020c406c 0x0030FC03
+DATA 4 0x020c4070 0x0FFFC000
+DATA 4 0x020c4074 0x3FF00000
+DATA 4 0x020c4078 0xFFFFF300
+DATA 4 0x020c407c 0x0F0000C3
+DATA 4 0x020c4080 0x00000FFF
+
+/* enable AXI cache for VDOA/VPU/IPU */
+DATA 4 0x020e0010 0xF00000CF
+/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+DATA 4 0x020e0018 0x007F007F
+DATA 4 0x020e001c 0x007F007F
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 3e314daec2f..d7c4b4f148c 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -12,6 +12,7 @@
 #include <asm/arch/mx6-pins.h>
 #include <asm/errno.h>
 #include <asm/gpio.h>
+#include <asm/imx-common/mxc_i2c.h>
 #include <asm/imx-common/iomux-v3.h>
 #include <asm/imx-common/boot_mode.h>
 #include <asm/imx-common/video.h>
@@ -23,6 +24,9 @@
 #include <asm/arch/crm_regs.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
+#include <i2c.h>
+#include <power/pmic.h>
+#include <power/pfuze100_pmic.h>
 DECLARE_GLOBAL_DATA_PTR;
 
 #define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
@@ -39,6 +43,14 @@ DECLARE_GLOBAL_DATA_PTR;
 #define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
 		      PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
 
+#define I2C_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
+	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |	\
+	PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+#define I2C_PMIC	1
+
+#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)
+
 int dram_init(void)
 {
 	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
@@ -129,6 +141,19 @@ iomux_v3_cfg_t const ecspi1_pads[] = {
 	MX6_PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 
+static struct i2c_pads_info i2c_pad_info1 = {
+	.scl = {
+		.i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | I2C_PAD,
+		.gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD,
+		.gp = IMX_GPIO_NR(4, 12)
+	},
+	.sda = {
+		.i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD,
+		.gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD,
+		.gp = IMX_GPIO_NR(4, 13)
+	}
+};
+
 static void setup_spi(void)
 {
 	imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
@@ -426,6 +451,64 @@ int board_init(void)
 #ifdef CONFIG_MXC_SPI
 	setup_spi();
 #endif
+	setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+
+	return 0;
+}
+
+static int pfuze_init(void)
+{
+	struct pmic *p;
+	int ret;
+	unsigned int reg;
+
+	ret = power_pfuze100_init(I2C_PMIC);
+	if (ret)
+		return ret;
+
+	p = pmic_get("PFUZE100_PMIC");
+	ret = pmic_probe(p);
+	if (ret)
+		return ret;
+
+	pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
+	printf("PMIC:  PFUZE100 ID=0x%02x\n", reg);
+
+	/* Increase VGEN3 from 2.5 to 2.8V */
+	pmic_reg_read(p, PFUZE100_VGEN3VOL, &reg);
+	reg &= ~0xf;
+	reg |= 0xa;
+	pmic_reg_write(p, PFUZE100_VGEN3VOL, reg);
+
+	/* Increase VGEN5 from 2.8 to 3V */
+	pmic_reg_read(p, PFUZE100_VGEN5VOL, &reg);
+	reg &= ~0xf;
+	reg |= 0xc;
+	pmic_reg_write(p, PFUZE100_VGEN5VOL, reg);
+
+	/* Set SW1AB stanby volage to 0.975V */
+	pmic_reg_read(p, PFUZE100_SW1ABSTBY, &reg);
+	reg &= ~0x3f;
+	reg |= 0x1b;
+	pmic_reg_write(p, PFUZE100_SW1ABSTBY, reg);
+
+	/* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+	pmic_reg_read(p, PUZE_100_SW1ABCONF, &reg);
+	reg &= ~0xc0;
+	reg |= 0x40;
+	pmic_reg_write(p, PUZE_100_SW1ABCONF, reg);
+
+	/* Set SW1C standby voltage to 0.975V */
+	pmic_reg_read(p, PFUZE100_SW1CSTBY, &reg);
+	reg &= ~0x3f;
+	reg |= 0x1b;
+	pmic_reg_write(p, PFUZE100_SW1CSTBY, reg);
+
+	/* Set SW1C/VDDSOC step ramp up time from 16us to 4us/25mV */
+	pmic_reg_read(p, PFUZE100_SW1CCONF, &reg);
+	reg &= ~0xc0;
+	reg |= 0x40;
+	pmic_reg_write(p, PFUZE100_SW1CCONF, reg);
 
 	return 0;
 }
@@ -446,6 +529,7 @@ int board_late_init(void)
 #ifdef CONFIG_CMD_BMODE
 	add_board_boot_modes(board_boot_modes);
 #endif
+	pfuze_init();
 
 	return 0;
 }