i2c, fsl_i2c: switch to new multibus/multiadapter support

- added to fsl_i2c driver new multibus/multiadpater support
- adapted all config files, which uses this driver

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>

2 files changed, 0 insertions, 31 deletions

diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c
index 918a6ab6398..a14496f5fbf 100644
--- a/board/keymile/common/ivm.c
+++ b/board/keymile/common/ivm.c
@@ -314,29 +314,13 @@ int ivm_analyze_eeprom(unsigned char *buf, int len)
 
 int ivm_read_eeprom(void)
 {
-#if defined(CONFIG_I2C_MUX)
-	I2C_MUX_DEVICE *dev = NULL;
-#endif
 	uchar i2c_buffer[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
 	char	*buf;
 	unsigned long dev_addr = CONFIG_SYS_IVM_EEPROM_ADR;
 	int ret;
 
-#if defined(CONFIG_SYS_I2C)
 	buf = getenv("EEprom_ivm");
 	i2c_set_bus_num(buf ? (int)simple_strtol(buf, NULL, 10) : 0);
-#else
-#if defined(CONFIG_I2C_MUX)
-	/* First init the Bus, select the Bus */
-	buf = (unsigned char *) getenv("EEprom_ivm");
-	if (buf != NULL)
-		dev = i2c_mux_ident_muxstring(buf);
-	if (dev == NULL) {
-		printf("Error couldnt add Bus for IVM\n");
-		return -1;
-	}
-	i2c_set_bus_num(dev->busid);
-#endif
 	/* add deblocking here */
 	i2c_make_abort();
 
diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c
index faaa39bc201..6d458096143 100644
--- a/board/keymile/km83xx/km83xx.c
+++ b/board/keymile/km83xx/km83xx.c
@@ -95,19 +95,6 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
 	{0,  0, 0, 0, QE_IOP_TAB_END},
 };
 
-static int board_init_i2c_busses(void)
-{
-	I2C_MUX_DEVICE *dev = NULL;
-	uchar *dtt_bus = (uchar *)"pca9547:70:a";
-
-	/* Set up the Bus for the DTTs */
-	dev = i2c_mux_ident_muxstring(dtt_bus);
-	if (dev == NULL)
-		printf("Error couldn't add Bus for DTT\n");
-
-	return 0;
-}
-
 #if defined(CONFIG_SUVD3)
 const uint upma_table[] = {
 	0x1ffedc00, 0x0ffcdc80, 0x0ffcdc80, 0x0ffcdc04, /* Words 0 to 3 */
@@ -206,8 +193,6 @@ int board_early_init_r(void)
 
 int misc_init_r(void)
 {
-	/* add board specific i2c busses */
-	board_init_i2c_busses();
 	return 0;
 }