diff options
| author | Valentin Longchamp <valentin.longchamp@keymile.com> | 2012-07-05 05:05:07 +0000 |
|---|---|---|
| committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2012-07-07 14:07:37 +0200 |
| commit | c1b8514a7a94b6b7e4e2bd779ecda16c86248299 (patch) | |
| tree | 406c19cde3de3f37c298c01de910017f7ac9bb40 /board/keymile | |
| parent | 48ced62cfb1722c97b6e598036b4e204980c4c47 (diff) | |
arm/km: redefine piggy 4 reg names to avoid conflicts
Some very similar #defines for reg addresses are used in a later patch
(managed_switch support for km_arm).
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Holger Brunck <holger.brunck@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
Diffstat (limited to 'board/keymile')
| -rw-r--r-- | board/keymile/km_arm/km_arm.c | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index c8da823cb28..ed2454ff0c0 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -328,13 +328,13 @@ void dram_init_banksize(void) #if (defined(CONFIG_KM_PIGGY4_88E6061)) -#define PHY_LED_SEL 0x18 -#define PHY_LED0_LINK (0x5) -#define PHY_LED1_ACT (0x8<<4) -#define PHY_LED2_INT (0xe<<8) -#define PHY_SPEC_CTRL 0x1c +#define PHY_LED_SEL_REG 0x18 +#define PHY_LED0_LINK (0x5) +#define PHY_LED1_ACT (0x8<<4) +#define PHY_LED2_INT (0xe<<8) +#define PHY_SPEC_CTRL_REG 0x1c #define PHY_RGMII_CLK_STABLE (0x1<<10) -#define PHY_CLSA (0x1<<1) +#define PHY_CLSA (0x1<<1) /* Configure and enable MV88E3018 PHY */ void reset_phy(void) @@ -346,15 +346,15 @@ void reset_phy(void) return; /* RGMII clk transition on data stable */ - if (miiphy_read(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL, ®) != 0) + if (!miiphy_read(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG, ®)) printf("Error reading PHY spec ctrl reg\n"); - if (miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL, - reg | PHY_RGMII_CLK_STABLE | PHY_CLSA) != 0) + if (!miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG, + reg | PHY_RGMII_CLK_STABLE | PHY_CLSA)) printf("Error writing PHY spec ctrl reg\n"); /* leds setup */ - if (miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_LED_SEL, - PHY_LED0_LINK | PHY_LED1_ACT | PHY_LED2_INT) != 0) + if (!miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_LED_SEL_REG, + PHY_LED0_LINK | PHY_LED1_ACT | PHY_LED2_INT)) printf("Error writing PHY LED reg\n"); /* reset the phy */ |