Initial revision

1 files changed, 749 insertions, 0 deletions

diff --git a/board/lubbock/memsetup.S b/board/lubbock/memsetup.S
new file mode 100644
index 00000000000..c0278340a82
--- /dev/null
+++ b/board/lubbock/memsetup.S
@@ -0,0 +1,749 @@
+/*
+ * Most of this taken from Redboot hal_platform_setup.h with cleanup
+ *
+ * NOTE: I haven't clean this up considerably, just enough to get it
+ * running. See hal_platform_setup.h for the source. See
+ * board/cradle/memsetup.S for another PXA250 setup that is
+ * much cleaner.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/pxa-regs.h>
+
+DRAM_SIZE:  .long   CFG_DRAM_SIZE
+
+/* wait for coprocessor write complete */
+   .macro CPWAIT reg
+   mrc  p15,0,\reg,c2,c0,0
+   mov  \reg,\reg
+   sub  pc,pc,#4
+   .endm
+
+
+.globl memsetup
+memsetup:
+
+    mov      r10, lr
+
+    /* Set up GPIO pins first */
+
+	ldr		r0,	=GPSR0
+	ldr		r1,	=CFG_GPSR0_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPSR1
+	ldr		r1,	=CFG_GPSR1_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPSR2
+	ldr		r1,	=CFG_GPSR2_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPCR0
+	ldr		r1,	=CFG_GPCR0_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPCR1
+	ldr		r1,	=CFG_GPCR1_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPCR2
+	ldr		r1,	=CFG_GPCR2_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPDR0
+	ldr		r1,	=CFG_GPDR0_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPDR1
+	ldr		r1,	=CFG_GPDR1_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPDR2
+	ldr		r1,	=CFG_GPDR2_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR0_L
+	ldr		r1,	=CFG_GAFR0_L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR0_U
+	ldr		r1,	=CFG_GAFR0_U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR1_L
+	ldr		r1,	=CFG_GAFR1_L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR1_U
+	ldr		r1,	=CFG_GAFR1_U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR2_L
+	ldr		r1,	=CFG_GAFR2_L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR2_U
+	ldr		r1,	=CFG_GAFR2_U_VAL
+	str		r1,   [r0]
+
+   /* enable GPIO pins */
+	ldr		r0,	=PSSR
+	ldr		r1,	=CFG_PSSR_VAL
+	str		r1,   [r0]
+
+   ldr    r3, =MSC1		    		/* low - bank 2 Lubbock Registers / SRAM */
+   ldr    r2, =CFG_MSC1_VAL			/* high - bank 3 Ethernet Controller */
+   str    r2, [r3]  				/* need to set MSC1 before trying to write to the HEX LEDs */
+   ldr    r2, [r3]  				/* need to read it back to make sure the value latches (see MSC section of manual) */
+
+   ldr    r1, =LED_BLANK
+   mov    r0, #0xFF
+   str    r0, [r1]    		/* turn on hex leds */
+
+loop:
+   ldr		r0, =0xB0070001
+   ldr    	r1, =_LED
+   str    	r0, [r1]    							/* hex display */
+
+/*********************************************************************
+    Initlialize Memory Controller
+	 The sequence below is based on the recommended init steps detailed
+	 in the EAS, chapter 5 (Chapter 10, Operating Systems Developers Guide)
+
+
+    pause for 200 uSecs- allow internal clocks to settle
+	 *Note: only need this if hard reset... doing it anyway for now
+*/
+
+	@ ---- Wait 200 usec
+	ldr r3, =OSCR       @ reset the OS Timer Count to zero
+	mov r2, #0
+	str r2, [r3]
+	ldr r4, =0x300			@ really 0x2E1 is about 200usec, so 0x300 should be plenty
+1:
+	ldr r2, [r3]
+	cmp r4, r2
+	bgt 1b
+
+mem_init:
+        @ get memory controller base address
+        ldr     r1,  =MEMC_BASE
+
+@****************************************************************************
+@  Step 1
+@
+
+        @ write msc0, read back to ensure data latches
+        @
+        ldr     r2,   =CFG_MSC0_VAL
+        str     r2,   [r1, #MSC0_OFFSET]
+        ldr     r2,   [r1, #MSC0_OFFSET]
+
+        @ write msc1
+        ldr     r2,  =CFG_MSC1_VAL
+        str     r2,  [r1, #MSC1_OFFSET]
+        ldr     r2,  [r1, #MSC1_OFFSET]
+
+        @ write msc2
+        ldr     r2,  =CFG_MSC2_VAL
+        str     r2,  [r1, #MSC2_OFFSET]
+        ldr     r2,  [r1, #MSC2_OFFSET]
+
+        @ write mecr
+        ldr     r2,  =CFG_MECR_VAL
+        str     r2,  [r1, #MECR_OFFSET]
+
+        @ write mcmem0
+        ldr     r2,  =CFG_MCMEM0_VAL
+        str     r2,  [r1, #MCMEM0_OFFSET]
+
+        @ write mcmem1
+        ldr     r2,  =CFG_MCMEM1_VAL
+        str     r2,  [r1, #MCMEM1_OFFSET]
+
+        @ write mcatt0
+        ldr     r2,  =CFG_MCATT0_VAL
+        str     r2,  [r1, #MCATT0_OFFSET]
+
+        @ write mcatt1
+        ldr     r2,  =CFG_MCATT1_VAL
+        str     r2,  [r1, #MCATT1_OFFSET]
+
+        @ write mcio0
+        ldr     r2,  =CFG_MCIO0_VAL
+        str     r2,  [r1, #MCIO0_OFFSET]
+
+        @ write mcio1
+        ldr     r2,  =CFG_MCIO1_VAL
+        str     r2,  [r1, #MCIO1_OFFSET]
+
+        @-------------------------------------------------------
+        @ 3rd bullet, Step 1
+        @
+
+        @ get the mdrefr settings
+        ldr     r3,  =CFG_MDREFR_VAL_100
+
+        @ extract DRI field (we need a valid DRI field)
+        @
+        ldr     r2,  =0xFFF
+
+        @ valid DRI field in r3
+        @
+        and     r3,  r3,  r2
+
+        @ get the reset state of MDREFR
+        @
+        ldr     r4,  [r1, #MDREFR_OFFSET]
+
+        @ clear the DRI field
+        @
+        bic     r4,  r4,  r2
+
+        @ insert the valid DRI field loaded above
+        @
+        orr     r4,  r4,  r3
+
+        @ write back mdrefr
+        @
+        str     r4,  [r1, #MDREFR_OFFSET]
+
+        @ *Note: preserve the mdrefr value in r4 *
+
+@****************************************************************************
+@  Step 2
+@
+        /* This should be for SRAM, why is it commented out??? */
+
+        @ fetch sxcnfg value
+        @
+        @ldr     r2,  =0
+        @ write back sxcnfg
+        @str     r2,  [r1, #SXCNFG_OFFSET]
+
+/*        @if sxcnfg=0, don't program for synch-static memory */
+        @cmp     r2,  #0
+        @beq     1f
+
+        @program sxmrs
+        @ldr     r2,  =SXMRS_SETTINGS
+        @str     r2,  [r1, #SXMRS_OFFSET]
+
+
+@****************************************************************************
+@  Step 3
+@
+
+        @ Assumes previous mdrefr value in r4, if not then read current mdrefr
+
+        @ clear the free-running clock bits
+        @ (clear K0Free, K1Free, K2Free
+        @
+        bic     r4,  r4,  #(0x00800000 | 0x01000000 | 0x02000000)
+
+        @ set K1RUN if bank 0 installed
+        @
+        orr   r4,  r4,  #0x00010000
+
+
+
+#ifdef THIS
+@<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
+@<!<!<!<!<!<!<!<!<!<!<!  Begin INSERT 1    <!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
+        @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+        @ Lubbock: Allow the user to select the {T/R/M} with predetermined
+        @   SDCLK.  Based on Table 3-1 in PXA250 and PXA210 Dev Man.
+        @
+        @  * = Must set MDREFR.K1DB2 to halve the MemClk for desired SDCLK[1]
+        @
+        @   S25, S26 used to provide all 400 MHz BIN values for Cotulla (0,0 - 1,3)
+        @   S25, S26 used to provide all 200 MHz BIN values for Sabinal
+        @
+        @   S23: Force the halving of MemClk when deriving SDCLK[1]
+        @        DOT: no override  !DOT: halve (if not already forced half)
+/*        @        *For certain MemClks, SDCLK's derivation is forced to be halved */
+        @
+        @   S24: Run/Turbo.
+        @        DOT: Run mode   !DOT: Turbo mode
+        @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+        @
+        @ Allow the user to control K1DB2 where applicable
+        @
+        @ Get the value of S23:          @ 1 = DOT (unity), 0 = !DOT (halve it)
+        @
+        @ DOT:   set K1DB2     (SDCLD = MemClk)
+        @ !DOT:  clear K1DB2   (SDCLK = MemClk/2)
+        @
+        @ldr r2, =FPGA_REGS_BASE_PHYSICAL
+
+        bl GET_S23                          @ r3, r2                    @ get the value of S23 in R0, i put the base adx of fpga in r3
+
+        cmp      r3, #0x0                 @ is !DOT?
+        orreq    r4, r4,  #0x00020000     @ SDClk[1] = MemClk/2
+        bicne    r4, r4,  #0x00020000     @ SDClk[1] = MemClk
+
+        @
+        @ Next, we need to look for S25,S26 selections that necessitate the
+        @  halving of MemClk to derive SDCLK[1]: (S25,S26)={03-0C, 10-13}
+        @ Override above S23-based selection accordingly.
+        @
+        ldr r2, =FPGA_REGS_BASE_PHYSICAL
+        bl  GET_S25                           @ r0, r2
+                                       @ get the value of S25 in R0, i put the base adx of fpga in r2
+
+
+
+        ldr r2, =FPGA_REGS_BASE_PHYSICAL
+        BL  GET_S26                              @ r3, r2
+                                      @ get the value of S26 in R1, i put the base adx of fpga in r2
+
+        orr     r0, r0, r3               @ concatenate S25 & S26 vals
+        and     r0, r0, #0xFF
+
+        @ Set K1DB2 for the frequencies that require it
+        @
+        cmp     r0, #0x03
+        cmpne   r0, #0x04
+        cmpne   r0, #0x05
+        cmpne   r0, #0x06
+        cmpne   r0, #0x07
+        cmpne   r0, #0x08
+        cmpne   r0, #0x09
+        cmpne   r0, #0x0A
+        cmpne   r0, #0x0B
+        cmpne   r0, #0x0C
+        cmpne   r0, #0x10
+        cmpne   r0, #0x11
+        cmpne   r0, #0x12
+        cmpne   r0, #0x13
+        orreq   r4, r4,  #0x00020000     @ SDCLK[1] = (MemClk)/2 for 03 - 0C @ 10 - 13
+
+        @
+        @ *Must make MSC0&1 adjustments now for MEMClks > 100MHz.
+        @
+        @ Adjust MSC0 for MemClks > 100 MHz
+        @
+        ldreq   r0,   [r1, #MSC0_OFFSET]
+        ldreq   r3,   =0x7F007F00
+        biceq   r0,   r0, r3                @ clear MSC0[14:12, 11:8] (RRR, RDN)
+        ldreq   r3,   =0x46004600
+        orreq   r0,   r0, r3                @ set   MSC0[14, 10:9]  (doubling RRR, RDN)
+        streq   r0,   [r1, #MSC0_OFFSET]
+        ldreq   r0,   [r1, #MSC0_OFFSET]    @ read it back to ensure that the data latches
+
+        @
+        @ Adjust MSC1.LH for MemClks > 100 MHz
+        @
+        ldreq   r0,   [r1, #MSC1_OFFSET]
+        ldreq   r3,   =0x7FF0
+        biceq   r0,   r0, r3               @ clear MSC1[14:12, 11:8, 7:4] (RRR, RDN, RDF)
+        ldreq   r3,   =0x4880
+        orreq   r0,   r0, r3               @ set   MSC1[14, 11, 7]  (doubling RRR, RDN, RDF)
+        streq   r0,   [r1, #MSC1_OFFSET]
+        ldreq   r0,   [r1, #MSC1_OFFSET]   @ read it back to ensure that the data latches
+
+        @                                                                   @
+        @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+#endif
+
+@<!<!<!<!<!<!<!<!<!<!<!    End INSERT 1    <!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
+@<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
+
+
+        @ write back mdrefr
+        @
+        str     r4,  [r1, #MDREFR_OFFSET]
+        ldr     r4,  [r1, #MDREFR_OFFSET]
+
+        @ deassert SLFRSH
+        @
+        bic     r4,  r4,  #0x00400000
+
+        @ write back mdrefr
+        @
+        str     r4,  [r1, #MDREFR_OFFSET]
+
+        @ assert E1PIN
+        @
+        orr     r4,  r4,  #0x00008000
+
+        @ write back mdrefr
+        @
+        str     r4,  [r1, #MDREFR_OFFSET]
+        ldr     r4,  [r1, #MDREFR_OFFSET]
+        nop
+        nop
+
+
+@****************************************************************************
+@  Step 4
+@
+
+        @ fetch platform value of mdcnfg
+        @
+        ldr     r2,  =CFG_MDCNFG_VAL
+
+        @ disable all sdram banks
+        @
+        bic     r2,  r2,  #(MDCNFG_DE0 | MDCNFG_DE1)
+        bic     r2,  r2,  #(MDCNFG_DE2 | MDCNFG_DE3)
+
+        @ program banks 0/1 for bus width
+        @
+        bic   r2,  r2,  #MDCNFG_DWID0      @0=32-bit
+
+
+        @ write initial value of mdcnfg, w/o enabling sdram banks
+        @
+        str     r2,  [r1, #MDCNFG_OFFSET]
+
+@ ****************************************************************************
+@  Step 5
+@
+
+        @ pause for 200 uSecs
+        @
+    	ldr r3, =OSCR   @reset the OS Timer Count to zero
+    	mov r2, #0
+	    str r2, [r3]
+	    ldr r4, =0x300			@really 0x2E1 is about 200usec, so 0x300 should be plenty
+1:
+	    ldr r2, [r3]
+	    cmp r4, r2
+	    bgt 1b
+
+
+@****************************************************************************
+@  Step 6
+@
+
+	    mov    r0, #0x78				    @turn everything off
+      mcr    p15, 0, r0, c1, c0, 0		@(caches off, MMU off, etc.)
+
+
+@ ****************************************************************************
+@  Step 7
+@
+        @ Access memory *not yet enabled* for CBR refresh cycles (8)
+        @ - CBR is generated for all banks
+
+	    ldr     r2, =CFG_DRAM_BASE
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+
+
+@ ****************************************************************************
+@  Step 8: NOP (enable dcache if you wanna... we dont)
+@
+
+
+@ ****************************************************************************
+@  Step 9
+@
+
+
+        @get memory controller base address
+        @
+        ldr     r1,  =MEMC_BASE
+
+        @fetch current mdcnfg value
+        @
+        ldr     r3,  [r1, #MDCNFG_OFFSET]
+
+        @enable sdram bank 0 if installed (must do for any populated bank)
+        @
+        orr     r3,  r3,  #MDCNFG_DE0
+
+        @write back mdcnfg, enabling the sdram bank(s)
+        @
+        str     r3,  [r1, #MDCNFG_OFFSET]
+
+
+@****************************************************************************
+@  Step 10
+@
+
+        @ write mdmrs
+        @
+        ldr     r2,  =CFG_MDMRS_VAL
+        str     r2,  [r1, #MDMRS_OFFSET]
+
+
+@****************************************************************************
+@  Step 11: Final Step
+@
+
+@INITINTC
+        @********************************************************************
+        @ Disable (mask) all interrupts at the interrupt controller
+        @
+
+        @ clear the interrupt level register (use IRQ, not FIQ)
+        @
+        mov     r1, #0
+        ldr     r2,  =ICLR
+        str     r1,  [r2]
+
+        @ mask all interrupts at the controller
+        @
+        ldr     r2,  =ICMR
+        str     r1,  [r2]
+
+
+@INITCLKS
+        @ ********************************************************************
+        @ Disable the peripheral clocks, and set the core clock
+        @ frequency (hard-coding at 398.12MHz for now).
+        @
+
+		@ Turn Off ALL on-chip peripheral clocks for re-configuration
+		@ *Note: See label 'ENABLECLKS' for the re-enabling
+		@
+        ldr     r1,  =CKEN
+        mov     r2,  #0
+        str     r2,  [r1]
+
+
+        @ default value in case no valid rotary switch setting is found
+        ldr     r2, =(CCCR_L27 | CCCR_M2 | CCCR_N10)        @ DEFAULT: {200/200/100}
+
+
+        @... and write the core clock config register
+        @
+        ldr     r1,  =CCCR
+        str     r2,  [r1]
+
+/*        @ enable the 32Khz oscillator for RTC and PowerManager
+        @
+        ldr     r1,  =OSCC
+        mov     r2,  #OSCC_OON
+        str     r2,  [r1]
+
+
+        @ NOTE:  spin here until OSCC.OOK get set,
+        @        meaning the PLL has settled.
+        @
+60:
+        ldr     r2, [r1]
+        ands    r2, r2, #1
+        beq     60b
+*/
+
+@OSCC_OON_DONE
+
+
+#ifdef  A0_COTULLA
+    @****************************************************************************
+    @ !!! Take care of A0 Errata Sighting #4 --
+    @ after a frequency change, the memory controller must be restarted
+    @
+
+        @ get memory controller base address
+        ldr     r1,  =MEMC_BASE
+
+        @ get the current state of MDREFR
+        @
+        ldr     r2,  [r1, #MDREFR_OFFSET]
+
+        @ clear E0PIN, E1PIN
+        @
+        bic     r3,  r2,  #(MDREFR_E0PIN | MDREFR_E1PIN)
+
+        @ write MDREFR with E0PIN, E1PIN cleared (disable sdclk[0,1])
+        @
+        str     r3,  [r1, #MDREFR_OFFSET]
+
+        @ then write MDREFR with E0PIN, E1PIN set (enable sdclk[0,1])
+        @
+        str     r2,  [r1, #MDREFR_OFFSET]
+
+        @ get the current state of MDCNFG
+        @
+        ldr     r3,  [r1, #MDCNFG_OFFSET]
+
+        @ disable all SDRAM banks
+        @
+        bic     r3,  r3,  #(MDCNFG_DE0 | MDCNFG_DE1)
+        bic     r3,  r3,  #(MDCNFG_DE2 |  MDCNFG_DE3)
+
+        @ write back MDCNFG
+        @
+        ldr     r3,  [r1, #MDCNFG_OFFSET]
+
+	    @ Access memory not yet enabled for CBR refresh cycles (8)
+        @ - CBR is generated for *all* banks
+	    ldr     r2, =CFG_DRAM_BASE
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+
+        @ fetch current mdcnfg value
+        @
+        ldr     r3,  [r1, #MDCNFG_OFFSET]
+
+        @ enable sdram bank 0 if installed
+        @
+        orr     r3,  r3,  #MDCNFG_DE0
+
+        @ write back mdcnfg, enabling the sdram bank(s)
+        @
+        str     r3,  [r1, #MDCNFG_OFFSET]
+
+        @ write mdmrs
+        @
+        ldr     r2,  =CFG_MDMRS_VAL
+        str     r2,  [r1, #MDMRS_OFFSET]
+
+
+
+    /*    @ errata: don't enable auto power-down */
+        @ get current value of mdrefr
+        @ldr     r3,  [r1, #MDREFR_OFFSET]
+        @ enable auto-power down
+        @orr     r3,  r3,  #MDREFR_APD
+        @write back mdrefr
+        @str     r3,  [r1, #MDREFR_OFFSET]
+
+#endif A0_Cotulla
+
+
+  ldr     r0, =0x000C0dE3
+  ldr    	r1, =_LED
+  str    	r0, [r1]    		/* hex display */
+
+@ ^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%
+@ ^%^%^%^%^%^%^%^%^%   above could be replaced by prememLLI ^%^%^%^%^%^%^%^%^%
+@ ^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%
+
+
+	/* Save SDRAM size */
+    ldr     r1, =DRAM_SIZE
+	 str	   r8, [r1]
+
+    ldr     r0, =0xC0DE0006
+    ldr    	r1, =_LED
+    str    	r0, [r1]    		/* hex display */
+
+	/* Interrupt init */
+	/* Mask all interrupts */
+    ldr	r0, =ICMR /* enable no sources */
+	mov r1, #0
+    str r1, [r0]
+
+#define NODEBUG
+#ifdef NODEBUG
+	/*Disable software and data breakpoints */
+	mov	r0,#0
+	mcr	p15,0,r0,c14,c8,0  /* ibcr0 */
+	mcr	p15,0,r0,c14,c9,0  /* ibcr1 */
+	mcr	p15,0,r0,c14,c4,0  /* dbcon */
+
+	/*Enable all debug functionality */
+	mov	r0,#0x80000000
+	mcr	p14,0,r0,c10,c0,0  /* dcsr */
+
+#endif
+
+	ldr     r0, =0xBEEF001D
+    ldr    	r1, =_LED
+    str    	r0, [r1]    		/* hex display */
+
+	mov	pc, r10
+
+@ End memsetup
+
+@ %%%%%%%%%%%   Useful subroutines
+GET_S23:
+    @ This macro will read S23 and return its value in r3
+    @ r2 contains the base address of the Lubbock user registers
+    ldr r2, =FPGA_REGS_BASE_PHYSICAL
+
+    /*@ read S23's value */
+    ldr     r3, [r2, #USER_SWITCHES_OFFSET]
+
+    @ mask out irrelevant bits
+    and     r3, r3, #0x200
+
+    @ get bit into position 0
+    mov     r3, r3, LSR #9
+
+    mov     pc, lr
+@ End GET_S23
+
+
+GET_S24:
+    @ This macro will read S24 and return its value in r0
+    @ r2 contains the base address of the Lubbock user registers
+    ldr r2, =FPGA_REGS_BASE_PHYSICAL
+
+    /*@ read S24's value */
+    ldr     r0, [r2, #USER_SWITCHES_OFFSET]
+
+    @ mask out irrelevant bits
+    and     r0, r0, #0x100
+
+    @ get bit into position 0
+    mov     r0, r0, LSR #8
+
+    mov     pc, lr
+@ End GET_S23
+
+
+GET_S25:
+    @ This macro will read rotary S25 and return its value in r0
+    @ r2 contains the base address of the Lubbock user registers
+    @ read the user switches register
+    ldr     r0, [r2, #USER_SWITCHES_OFFSET]
+
+    @ mask out irrelevant bits
+    and     r0, r0, #0xF0
+
+    mov     pc, lr
+@ End subroutine
+
+
+GET_S26:
+    @ This macro will read rotary S26 and return its value in r3
+    @ r2 contains the base address of the Lubbock user registers
+    @ read the user switches register
+    ldr     r3, [r2, #USER_SWITCHES_OFFSET]
+
+    @ mask out irrelevant bits
+    and     r3, r3, #0x0F
+
+    mov     pc, lr
+@ End subroutine GET_S26
+
+