powerpc: remove MOUSSE board support

Enough time has passed since this board was moved to Orphan. Remove.

 - Remove board/mousse/*
 - Remove include/configs/MOUSSE.h
 - Clean-up defined(CONFIG_MOUSSE)
 - Move the entry from boards.cfg to doc/README.scrapyard

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

12 files changed, 0 insertions, 2559 deletions

diff --git a/board/mousse/Makefile b/board/mousse/Makefile
deleted file mode 100644
index e2951d54ad9..00000000000
--- a/board/mousse/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= mousse.o m48t59y.o pci.o flash.o
diff --git a/board/mousse/README b/board/mousse/README
deleted file mode 100644
index d5dda7a8e73..00000000000
--- a/board/mousse/README
+++ /dev/null
@@ -1,346 +0,0 @@
-
-U-Boot for MOUSSE/MPC8240 (KAHLUA)
-----------------------------------
-James Dougherty (jfd@broadcom.com), 09/10/01
-
-The Broadcom/Vooha Mousse board is a 3U Compact PCI system board
-which uses the MPC8240, a 64MB SDRAM SIMM, and has onboard
-DEC 21143, NS16550 UART, an SGS M48T59Y TOD, and 4MB FLASH.
-See also: http://www.vooha.com/
-
-* NVRAM setenv/printenv/savenv supported.
-* Date Command
-* Serial Console support
-* Network support
-* FLASH of kernel images is supported.
-* FLASH of U-Boot to onboard and PLCC boot region.
-* Kernel command line options from NVRAM is supported.
-* IP PNP options supported.
-
-U-Boot Loading...
-
-
-U-Boot 1.0.5 (Sep 10 2001 - 00:22:25)
-
-CPU:   MPC8240 Revision 1.1 at 198 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: MOUSSE MPC8240/KAHLUA - CHRP (MAP B)
-Built: Sep 10 2001 at 01:01:50
-MPLD:  Revision 127
-Local Bus:  33 MHz
-RTC:   M48T589 TOD/NVRAM (8176) bytes
-  Current date/time: 9/10/2001 0:18:52
-DRAM:  64 MB
-FLASH:  1.960 MB
-PCI:    scanning bus0 ...
-  bus dev fn venID devID class  rev MBAR0    MBAR1    IPIN ILINE
-  00  00  00 1057  0003  060000 11  00000008 00000000 01   00
-  00  0d  00 1011  0019  020000 41  80000001 80000000 01   01
-  00  0e  00 105a  4d38  018000 01  a0000001 a0001001 01   03
-In:    serial
-Out:   serial
-Err:   serial
-
-Hit any key to stop autoboot:  0
-=>
-
-I. Root FileSystem/IP Configuration
-
-bootcmd=tftp 100000 vmlinux.img;bootm
-bootdelay=3
-baudrate=9600
-ipaddr=<IP ADDRESS>
-netmask=<NETMASK>
-hostname=<NAME>
-serverip=<NFS SERVER IP ADDRESS>
-ethaddr=00:00:10:20:30:44
-nfsroot=<NFS SERVER IP ADDRESS>:/boot/root-fs
-gateway=<IP ADDRESS>
-root=/dev/nfs
-stdin=serial
-stdout=serial
-stderr=serial
-
-NVRAM environment variables.
-
-use the command:
-
-setenv <attribute> <value>
-
-type "saveenv" to write to NVRAM.
-
-
-II. To boot from a hard drive:
-
-setenv root /dev/hda1
-
-
-III. IP options which configure the network:
-
-ipaddr=<IP ADDRESS OF MACHINE>
-netmask=<NETMASK>
-hostname=mousse
-ethaddr=00:00:10:20:30:44
-gateway=<IP ADDRESS OF GATEWAY/ROUTER>
-
-
-IV. IP Options which configure NFS Root/Boot Support
-
-root=/dev/nfs
-serverip=<NFS SERVER IP ADDRESS>
-nfsroot=<NFS SERVER IP ADDRESS>:/boot/root-fs
-
-V. U-Boot Image Support
-
-The U-Boot boot loader assumes that after you build
-your kernel (vmlinux), you will create a U-Boot image
-using the following commands or script:
-
-#!/bin/csh
-/bin/touch vmlinux.img
-/bin/rm vmlinux.img
-set path=($TOOLBASE/bin $path)
-set path=($U_BOOT/tools $path)
-powerpc-linux-objcopy -S -O binary vmlinux vmlinux.bin
-gzip -vf vmlinux.bin
-mkimage -A ppc -O linux -T kernel -C gzip -a 0 -e 0 -n vmlinux.bin.gz -d vmlinux.bin.gz vmlinux.img
-ls -l vmlinux.img
-
-
-VI. ONBOARD FLASH Support
-
-FLASH support is provided for the onboard FLASH chip Bootrom area.
-U-Boot is loaded into either the ROM boot region of the FLASH chip,
-after first being boot-strapped from a pre-progammed AMD29F040 PLCC
-bootrom. The PLCC needs to be programmed with a ROM burner using
-AMD 29F040 ROM parts and the u-boot.bin or u-boot.hex (S-Record)
-images.
-
-The PLCC overlays this same region of flash as the onboard FLASH,
-the jumper J100 is a chip-select for which flash chip you want to
-progam. When jumper J100 is connected to pins 2-3, you boot from
-PLCC FLASH.
-
-To bringup a system, simply flash a flash an AMD29F040 PLCC
-bootrom, and put this in the PLCC socket. Move jumper J100 to
-pins 2-3 and boot from the PLCC.
-
-
-Now, while the system is running, move Jumper J100 to
-pins 1-2 and follow the procedure below to FLASH a bootrom
-(u-boot.bin) image into the onboard bootrom region (AMD29LV160DB):
-
-tftp 100000 u-boot.bin
-protect off FFF00000 FFF7FFFF
-erase FFF00000 FFF7FFFF
-cp.b 100000 FFF00000 \${filesize}\
-
-
-Here is an example:
-
-=>tftp 100000 u-boot.bin
-eth_halt
-eth0: DC21143 Ethernet adapter(bus=0, device=13, func=0)
-DEC Ethernet iobase=0x80000000
-ARP broadcast 1
-Filename 'u-boot.bin'.
-Load address: 0x100000
-Loading: #########################
-done
-Bytes transferred = 123220 (1e154 hex)
-eth_halt
-=>protect off FFF00000 FFF7FFFF
-Un-Protected 8 sectors
-=>erase FFF00000 FFF7FFFF
-Erase Flash from 0xfff00000 to 0xfff7ffff
-Erase FLASH[PLCC_BOOT] -8 sectors:........ done
-Erased 8 sectors
-=>cp.b 100000 FFF00000 1e154
-Copy to Flash... FLASH[PLCC_BOOT]:..done
-=>
-
-
-B. FLASH RAMDISK REGION
-
-FLASH support is provided for an Onboard 512K RAMDISK region.
-
-TThe following commands will FLASH a bootrom (u-boot.bin) image
-into the onboard FLASH region (AMD29LV160DB 2MB FLASH):
-
-tftp 100000 u-boot.bin
-protect off FFF80000 FFFFFFFF
-erase FFF80000 FFFFFFFF
-cp.b 100000 FFF80000 \${filesize}\
-
-
-C. FLASH KERNEL REGION (960KB)
-
-FLASH support is provided for the 960KB onboard FLASH1 segment.
-This allows flashing of kernel images which U-Boot can load
-and run (standalone) from the onboard FLASH chip. It also assumes
-
-The following commands will FLASH a kernel image to 0xffe10000
-
-tftp 100000 vmlinux.img
-protect off FFE10000 FFEFFFFF
-erase FFE10000 FFEFFFFF
-cp.b 100000 FFE10000 \${filesize}\
-reset
-
-Here is an example:
-
-
-=>tftp 100000 vmlinux.img
-eth_halt
-eth0: DC21143 Ethernet adapter(bus=0, device=13, func=0)
-DEC Ethernet iobase=0x80000000
-ARP broadcast 1
-TFTP from server 209.128.93.133; our IP address is 209.128.93.138
-Filename 'vmlinux.img'.
-Load address: 0x100000
-Loading: #####################################################################################################################################################
-done
-Bytes transferred = 760231 (b99a7 hex)
-eth_halt
-=>protect off FFE10000 FFEFFFFF
-Un-Protected 15 sectors
-=>erase FFE10000 FFEFFFFF
-Erase Flash from 0xffe10000 to 0xffefffff
-Erase FLASH[F0_SA3(KERNEL)] -15 sectors:............... done
-Erased 15 sectors
-=>cp.b 100000 FFE10000 b99a7
-Copy to Flash... FLASH[F0_SA3(KERNEL)]:............done
-=>
-
-
-When finished, use the command:
-
-bootm ffe10000
-
-to start the kernel.
-
-Finally, to make this the default boot command, use
-the following commands:
-
-setenv bootcmd bootm ffe10000
-savenv
-
-to make it automatically boot the kernel from FLASH.
-
-
-To go back to development mode (NFS boot)
-
-setenv bootcmd tftp 100000 vmlinux.img\;bootm
-savenv
-
-
-=>tftp 100000 vmlinux.img
-eth0: DC21143 Ethernet adapter(bus=0, device=13, func=0)
-DEC Ethernet iobase=0x80000000
-ARP broadcast 1
-Filename 'vmlinux.img'.
-Load address: 0x100000
-Loading: ####################################################################################################################################################
-done
-Bytes transferred = 752717 (b7c4d hex)
-eth_halt
-=>protect off FFE10000 FFEFFFFF
-Un-Protected 15 sectors
-=>erase FFE10000 FFEFFFFF
-Erase Flash from 0xffe10000 to 0xffefffff
-Erase FLASH[F0_SA3(KERNEL)] -15 sectors:............... done
-Erased 15 sectors
-=>cp.b 100000 FFE10000 b7c4d
-Copy to Flash... FLASH[F0_SA3(KERNEL)]:............done
-=>bootm ffe10000
-## Booting image at ffe10000 ...
-   Image Name:   vmlinux.bin.gz
-   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
-   Data Size:    752653 Bytes = 735 kB = 0 MB
-   Load Address: 00000000
-   Entry Point:  00000000
-   Verifying Checksum ... OK
-   Uncompressing Kernel Image ... OK
-Total memory = 64MB; using 0kB for hash table (at 00000000)
-Linux version 2.4.2_hhl20 (jfd@atlantis) (gcc version 2.95.2 19991024 (release)) #597 Wed Sep 5 23:23:23 PDT 2001
-cpu0: MPC8240/KAHLUA : MOUSSE Platform : 64MB RAM: MPLD Rev. 7f
-Sandpoint port (C) 2000, 2001 MontaVista Software, Inc. (source@mvista.com)
-IP PNP: 802.3 Ethernet Address=<0:0:10:20:30:44>
-NOTICE: mounting root file system via NFS
-On node 0 totalpages: 16384
-zone(0): 16384 pages.
-zone(1): 0 pages.
-zone(2): 0 pages.
-time_init: decrementer frequency = 16.665914 MHz
-time_init: MPC8240 PCI Bus frequency = 33.331828 MHz
-Calibrating delay loop... 133.12 BogoMIPS
-Memory: 62436k available (1336k kernel code, 500k data, 88k init, 0k highmem)
-Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
-Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
-Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
-Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
-POSIX conformance testing by UNIFIX
-PCI: Probing PCI hardware
-Linux NET4.0 for Linux 2.4
-Based upon Swansea University Computer Society NET3.039
-Initializing RT netlink socket
-Starting kswapd v1.8
-pty: 256 Unix98 ptys configured
-block: queued sectors max/low 41394kB/13798kB, 128 slots per queue
-Uniform Multi-Platform E-IDE driver Revision: 6.31
-ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
-PDC20262: IDE controller on PCI bus 00 dev 70
-PDC20262: chipset revision 1
-PDC20262: not 100% native mode: will probe irqs later
-PDC20262: ROM enabled at 0x000d0000
-PDC20262: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
-PDC20262: FORCING BURST BIT 0x00 -> 0x01 ACTIVE
-PDC20262: irq=3 dev->irq=3
-    ide0: BM-DMA at 0xbfff00-0xbfff07, BIOS settings: hda:DMA, hdb:DMA
-    ide1: BM-DMA at 0xbfff08-0xbfff0f, BIOS settings: hdc:pio, hdd:pio
-hda: WDC WD300AB-00BVA0, ATA DISK drive
-hdc: SONY CD-RW CRX160E, ATAPI CD/DVD-ROM drive
-ide0 at 0xbfff78-0xbfff7f,0xbfff76 on irq 3
-ide1 at 0xbfff68-0xbfff6f,0xbfff66 on irq 3
-hda: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=58168/16/63, UDMA(66)
-hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache
-Uniform CD-ROM driver Revision: 3.12
-Partition check:
- /dev/ide/host0/bus0/target0/lun0: p1 p2
-hd: unable to get major 3 for hard disk
-udf: registering filesystem
-loop: loaded (max 8 devices)
-Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
-ttyS00 at 0xffe08080 (irq = 4) is a ST16650
-Linux Tulip driver version 0.9.13a (January 20, 2001)
-eth0: Digital DS21143 Tulip rev 65 at 0xbfff80, EEPROM not present, 00:00:10:20:30:44, IRQ 1.
-eth0:  MII transceiver #0 config 3000 status 7829 advertising 01e1.
-NET4: Linux TCP/IP 1.0 for NET4.0
-IP Protocols: ICMP, UDP, TCP
-IP: routing cache hash table of 512 buckets, 4Kbytes
-TCP: Hash tables configured (established 4096 bind 4096)
-NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
-devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
-devfs: boot_options: 0x0
-VFS: Mounted root (nfs filesystem).
-Mounted devfs on /dev
-Freeing unused kernel memory: 88k init 4k openfirmware
-eth0: Setting full-duplex based on MII#0 link partner capability of 45e1.
-INIT: version 2.78 booting
-INIT: Entering runlevel: 2
-
-
-Welcome to Linux/PPC
-MPC8240/MOUSSE
-
-
-mousse login: root
-Password:
-PAM_unix[13]: (login) session opened for user root by LOGIN(uid=0)
-Last login: Thu Sep  6 00:16:51 2001 on console
-
-
-Welcome to Linux/PPC
-MPC8240/MOUSSE
-
-
-mousse#
diff --git a/board/mousse/flash.c b/board/mousse/flash.c
deleted file mode 100644
index acedcb1aa13..00000000000
--- a/board/mousse/flash.c
+++ /dev/null
@@ -1,917 +0,0 @@
-/*
- * MOUSSE/MPC8240 Board definitions.
- * Flash Routines for MOUSSE onboard AMD29LV106DB devices
- *
- * (C) Copyright 2000
- * Marius Groeger <mgroeger@sysgo.de>
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp.
- * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <malloc.h>
-#include "mousse.h"
-#include "flash.h"
-
-int flashLibDebug = 0;
-int flashLibInited = 0;
-
-#define OK  0
-#define ERROR -1
-#define STATUS int
-#define PRINTF			if (flashLibDebug) printf
-#if 0
-#define PRIVATE			static
-#else
-#define PRIVATE
-#endif
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-#define SLEEP_DELAY    166
-#define FLASH_SECTOR_SIZE   (64*1024)
-/***********************************************************************
- *
- * Virtual Flash Devices on Mousse board
- *
- * These must be kept in sync with the definitions in flashLib.h.
- *
- ***********************************************************************/
-
-PRIVATE flash_dev_t flashDev[] = {
-    /* Bank 0 sector SA0 (16 kB) */
-    {	"SA0",FLASH0_BANK, FLASH0_SEG0_START, 1, 14,
-	FLASH0_VENDOR_ID, FLASH0_DEVICE_ID
-    },
-    /* Bank 0 sector SA1 (8 kB) */
-    {	"SA1", FLASH0_BANK, FLASH0_SEG0_START + 0x4000, 1, 13,
-	FLASH0_VENDOR_ID, FLASH0_DEVICE_ID
-    },
-    /* Bank 0 sector SA2 (8 kB) */
-    {	"SA2", FLASH0_BANK, FLASH0_SEG0_START + 0x6000, 1, 13,
-	FLASH0_VENDOR_ID, FLASH0_DEVICE_ID
-    },
-    /* Bank 0 sector SA3 is occluded by Mousse I/O devices */
-    /* Bank 0 sectors SA4-SA18, after Mousse devices up to PLCC (960 kB)  */
-    {	"KERNEL", FLASH0_BANK, FLASH0_SEG1_START, 15, 16,
-	FLASH0_VENDOR_ID, FLASH0_DEVICE_ID
-    },
-    /* Bank 0 sectors SA19-SA26, jumper can occlude this by PLCC (512 kB) */
-    /* This is where the Kahlua boot vector and boot ROM code resides. */
-    {	"BOOT",FLASH0_BANK, FLASH0_SEG2_START, 8, 16,
-	FLASH0_VENDOR_ID, FLASH0_DEVICE_ID
-    },
-    /* Bank 0 sectors SA27-SA34 (512 kB) */
-    {	"RAMDISK",FLASH0_BANK, FLASH0_SEG3_START, 8, 16,
-	FLASH0_VENDOR_ID, FLASH0_DEVICE_ID
-    },
-};
-
-int flashDevCount = (sizeof (flashDev) / sizeof (flashDev[0]));
-
-#define DEV(no)			(&flashDev[no])
-#define DEV_NO(dev)		((dev) - flashDev)
-
-/***********************************************************************
- *
- * Private Flash Routines
- *
- ***********************************************************************/
-
-/*
- * The convention is:
- *
- * "addr" is always the PROM raw address, which is the address of an
- * 8-bit quantity for flash 0 and 16-bit quantity for flash 1.
- *
- * "pos" is always a logical byte position from the PROM beginning.
- */
-
-#define FLASH0_ADDR(dev, addr) \
-	((unsigned char *) ((dev)->base + (addr)))
-
-#define FLASH0_WRITE(dev, addr, value) \
-	(*FLASH0_ADDR(dev, addr) = (value))
-
-#define FLASH0_READ(dev, addr) \
-	(*FLASH0_ADDR(dev, addr))
-
-PRIVATE int flashCheck (flash_dev_t * dev)
-{
-	if (!flashLibInited) {
-		printf ("flashCheck: flashLib not initialized\n");
-		return ERROR;
-	}
-
-	if (dev < &flashDev[0] || dev >= &flashDev[flashDevCount]) {
-		printf ("flashCheck: Bad dev parameter\n");
-		return ERROR;
-	}
-
-	if (!dev->found) {
-		printf ("flashCheck: Device %d not available\n", DEV_NO (dev));
-		return ERROR;
-	}
-
-	return OK;
-}
-
-PRIVATE void flashReset (flash_dev_t * dev)
-{
-	PRINTF ("flashReset: dev=%d\n", DEV_NO (dev));
-
-	if (dev->bank == FLASH0_BANK) {
-		FLASH0_WRITE (dev, 0x555, 0xaa);
-		FLASH0_WRITE (dev, 0xaaa, 0x55);
-		FLASH0_WRITE (dev, 0x555, 0xf0);
-	}
-
-	udelay (SLEEP_DELAY);
-
-	PRINTF ("flashReset: done\n");
-}
-
-PRIVATE int flashProbe (flash_dev_t * dev)
-{
-	int rv, deviceID, vendorID;
-
-	PRINTF ("flashProbe: dev=%d\n", DEV_NO (dev));
-
-	if (dev->bank != FLASH0_BANK) {
-		rv = ERROR;
-		goto DONE;
-	}
-
-	FLASH0_WRITE (dev, 0xaaa, 0xaa);
-	FLASH0_WRITE (dev, 0x555, 0x55);
-	FLASH0_WRITE (dev, 0xaaa, 0x90);
-
-	udelay (SLEEP_DELAY);
-
-	vendorID = FLASH0_READ (dev, 0);
-	deviceID = FLASH0_READ (dev, 2);
-
-	FLASH0_WRITE (dev, 0, 0xf0);
-
-	PRINTF ("flashProbe: vendor=0x%x device=0x%x\n", vendorID, deviceID);
-
-	if (vendorID == dev->vendorID && deviceID == dev->deviceID)
-		rv = OK;
-	else
-		rv = ERROR;
-
-  DONE:
-	PRINTF ("flashProbe: rv=%d\n", rv);
-
-	return rv;
-}
-
-PRIVATE int flashWait (flash_dev_t * dev, int addr, int expect, int erase)
-{
-	int rv = ERROR;
-	int i, data;
-	int polls;
-
-#if 0
-	PRINTF ("flashWait: dev=%d addr=0x%x expect=0x%x erase=%d\n",
-		DEV_NO (dev), addr, expect, erase);
-#endif
-
-	if (dev->bank != FLASH0_BANK) {
-		rv = ERROR;
-		goto done;
-	}
-
-	if (erase)
-		polls = FLASH_ERASE_SECTOR_TIMEOUT;	/* Ticks */
-	else
-		polls = FLASH_PROGRAM_POLLS;	/* Loops */
-
-	for (i = 0; i < polls; i++) {
-		if (erase)
-			udelay (SLEEP_DELAY);
-
-		data = FLASH0_READ (dev, addr);
-
-		if (((data ^ expect) & 0x80) == 0) {
-			rv = OK;
-			goto done;
-		}
-
-		if (data & 0x20) {
-			/*
-			 * If the 0x20 bit has come on, it could actually be because
-			 * the operation succeeded, so check the done bit again.
-			 */
-
-			data = FLASH0_READ (dev, addr);
-
-			if (((data ^ expect) & 0x80) == 0) {
-				rv = OK;
-				goto done;
-			}
-
-			printf ("flashWait: Program error (dev: %d, addr: 0x%x)\n",
-					DEV_NO (dev), addr);
-
-			flashReset (dev);
-			rv = ERROR;
-			goto done;
-		}
-	}
-
-	printf ("flashWait: Timeout %s (dev: %d, addr: 0x%x)\n",
-		erase ? "erasing sector" : "programming byte",
-		DEV_NO (dev), addr);
-
-  done:
-
-#if 0
-	PRINTF ("flashWait: rv=%d\n", rv);
-#endif
-
-	return rv;
-}
-
-/***********************************************************************
- *
- * Public Flash Routines
- *
- ***********************************************************************/
-
-STATUS flashLibInit (void)
-{
-	int i;
-
-	PRINTF ("flashLibInit: devices=%d\n", flashDevCount);
-
-	for (i = 0; i < flashDevCount; i++) {
-		flash_dev_t *dev = &flashDev[i];
-
-		/*
-		 * For bank 1, probe both without and with byte swappage,
-		 * so that this module works on both old and new Mousse boards.
-		 */
-
-		flashReset (dev);
-
-		if (flashProbe (dev) != ERROR)
-			dev->found = 1;
-
-		flashReset (dev);
-
-		if (flashProbe (dev) != ERROR)
-			dev->found = 1;
-
-		dev->swap = 0;
-
-		if (dev->found) {
-			PRINTF ("\n  FLASH %s[%d]: iobase=0x%x - %d sectors %d KB",
-				flashDev[i].name, i, flashDev[i].base,
-				flashDev[i].sectors,
-				(flashDev[i].sectors * FLASH_SECTOR_SIZE) / 1024);
-
-		}
-	}
-
-	flashLibInited = 1;
-
-	PRINTF ("flashLibInit: done\n");
-
-	return OK;
-}
-
-STATUS flashEraseSector (flash_dev_t * dev, int sector)
-{
-	int pos, addr;
-
-	PRINTF ("flashErasesector: dev=%d sector=%d\n", DEV_NO (dev), sector);
-
-	if (flashCheck (dev) == ERROR)
-		return ERROR;
-
-	if (sector < 0 || sector >= dev->sectors) {
-		printf ("flashEraseSector: Sector out of range (dev: %d, sector: %d)\n", DEV_NO (dev), sector);
-		return ERROR;
-	}
-
-	pos = FLASH_SECTOR_POS (dev, sector);
-
-	if (dev->bank != FLASH0_BANK) {
-		return ERROR;
-	}
-
-	addr = pos;
-
-	FLASH0_WRITE (dev, 0xaaa, 0xaa);
-	FLASH0_WRITE (dev, 0x555, 0x55);
-	FLASH0_WRITE (dev, 0xaaa, 0x80);
-	FLASH0_WRITE (dev, 0xaaa, 0xaa);
-	FLASH0_WRITE (dev, 0x555, 0x55);
-	FLASH0_WRITE (dev, addr, 0x30);
-
-	return flashWait (dev, addr, 0xff, 1);
-}
-
-/*
- * Note: it takes about as long to flash all sectors together with Chip
- * Erase as it does to flash them one at a time (about 30 seconds for 2
- * MB).  Also since we want to be able to treat subsets of sectors as if
- * they were complete devices, we don't use Chip Erase.
- */
-
-STATUS flashErase (flash_dev_t * dev)
-{
-	int sector;
-
-	PRINTF ("flashErase: dev=%d sectors=%d\n", DEV_NO (dev), dev->sectors);
-
-	if (flashCheck (dev) == ERROR)
-		return ERROR;
-
-	for (sector = 0; sector < dev->sectors; sector++) {
-		if (flashEraseSector (dev, sector) == ERROR)
-			return ERROR;
-	}
-	return OK;
-}
-
-/*
- * Read and write bytes
- */
-
-STATUS flashRead (flash_dev_t * dev, int pos, char *buf, int len)
-{
-	int addr, words;
-
-	PRINTF ("flashRead: dev=%d pos=0x%x buf=0x%x len=0x%x\n",
-		DEV_NO (dev), pos, (int) buf, len);
-
-	if (flashCheck (dev) == ERROR)
-		return ERROR;
-
-	if (pos < 0 || len < 0 || pos + len > FLASH_MAX_POS (dev)) {
-		printf ("flashRead: Position out of range "
-			"(dev: %d, pos: 0x%x, len: 0x%x)\n",
-			DEV_NO (dev), pos, len);
-		return ERROR;
-	}
-
-	if (len == 0)
-		return OK;
-
-	if (dev->bank == FLASH0_BANK) {
-		addr = pos;
-		words = len;
-
-		PRINTF ("flashRead: memcpy(0x%x, 0x%x, 0x%x)\n",
-			(int) buf, (int) FLASH0_ADDR (dev, pos), len);
-
-		memcpy (buf, FLASH0_ADDR (dev, addr), words);
-
-	}
-	PRINTF ("flashRead: rv=OK\n");
-
-	return OK;
-}
-
-STATUS flashWrite (flash_dev_t * dev, int pos, char *buf, int len)
-{
-	int addr, words;
-
-	PRINTF ("flashWrite: dev=%d pos=0x%x buf=0x%x len=0x%x\n",
-		DEV_NO (dev), pos, (int) buf, len);
-
-	if (flashCheck (dev) == ERROR)
-		return ERROR;
-
-	if (pos < 0 || len < 0 || pos + len > FLASH_MAX_POS (dev)) {
-		printf ("flashWrite: Position out of range "
-			"(dev: %d, pos: 0x%x, len: 0x%x)\n",
-			DEV_NO (dev), pos, len);
-		return ERROR;
-	}
-
-	if (len == 0)
-		return OK;
-
-	if (dev->bank == FLASH0_BANK) {
-		unsigned char tmp;
-
-		addr = pos;
-		words = len;
-
-		while (words--) {
-			tmp = *buf;
-			if (~FLASH0_READ (dev, addr) & tmp) {
-				printf ("flashWrite: Attempt to program 0 to 1 "
-					"(dev: %d, addr: 0x%x, data: 0x%x)\n",
-					DEV_NO (dev), addr, tmp);
-				return ERROR;
-			}
-			FLASH0_WRITE (dev, 0xaaa, 0xaa);
-			FLASH0_WRITE (dev, 0x555, 0x55);
-			FLASH0_WRITE (dev, 0xaaa, 0xa0);
-			FLASH0_WRITE (dev, addr, tmp);
-			if (flashWait (dev, addr, tmp, 0) < 0)
-				return ERROR;
-			buf++;
-			addr++;
-		}
-	}
-
-	PRINTF ("flashWrite: rv=OK\n");
-
-	return OK;
-}
-
-/*
- * flashWritable returns true if a range contains all F's.
- */
-
-STATUS flashWritable (flash_dev_t * dev, int pos, int len)
-{
-	int addr, words;
-	int rv = ERROR;
-
-	PRINTF ("flashWritable: dev=%d pos=0x%x len=0x%x\n",
-			DEV_NO (dev), pos, len);
-
-	if (flashCheck (dev) == ERROR)
-		goto done;
-
-	if (pos < 0 || len < 0 || pos + len > FLASH_MAX_POS (dev)) {
-		printf ("flashWritable: Position out of range "
-			"(dev: %d, pos: 0x%x, len: 0x%x)\n",
-			DEV_NO (dev), pos, len);
-		goto done;
-	}
-
-	if (len == 0) {
-		rv = 1;
-		goto done;
-	}
-
-	if (dev->bank == FLASH0_BANK) {
-		addr = pos;
-		words = len;
-
-		while (words--) {
-			if (FLASH0_READ (dev, addr) != 0xff) {
-				rv = 0;
-				goto done;
-			}
-			addr++;
-		}
-	}
-
-	rv = 1;
-
-  done:
-	PRINTF ("flashWrite: rv=%d\n", rv);
-	return rv;
-}
-
-
-/*
- * NOTE: the below code cannot run from FLASH!!!
- */
-/***********************************************************************
- *
- * Flash Diagnostics
- *
- ***********************************************************************/
-
-STATUS flashDiag (flash_dev_t * dev)
-{
-	unsigned int *buf = 0;
-	int i, len, sector;
-	int rv = ERROR;
-
-	if (flashCheck (dev) == ERROR)
-		return ERROR;
-
-	printf ("flashDiag: Testing device %d, "
-		"base: 0x%x, %d sectors @ %d kB = %d kB\n",
-		DEV_NO (dev), dev->base,
-		dev->sectors,
-		1 << (dev->lgSectorSize - 10),
-		dev->sectors << (dev->lgSectorSize - 10));
-
-	len = 1 << dev->lgSectorSize;
-
-	printf ("flashDiag: Erasing\n");
-
-	if (flashErase (dev) == ERROR) {
-		printf ("flashDiag: Erase failed\n");
-		goto done;
-	}
-	printf ("%d bytes requested ...\n", len);
-	buf = malloc (len);
-	printf ("allocated %d bytes ...\n", len);
-	if (buf == 0) {
-		printf ("flashDiag: Out of memory\n");
-		goto done;
-	}
-
-	/*
-	 * Write unique counting pattern to each sector
-	 */
-
-	for (sector = 0; sector < dev->sectors; sector++) {
-		printf ("flashDiag: Write sector %d\n", sector);
-
-		for (i = 0; i < len / 4; i++)
-			buf[i] = sector << 24 | i;
-
-		if (flashWrite (dev,
-				sector << dev->lgSectorSize,
-				(char *) buf, len) == ERROR) {
-			printf ("flashDiag: Write failed (dev: %d, sector: %d)\n",
-				DEV_NO (dev), sector);
-			goto done;
-		}
-	}
-
-	/*
-	 * Verify
-	 */
-
-	for (sector = 0; sector < dev->sectors; sector++) {
-		printf ("flashDiag: Verify sector %d\n", sector);
-
-		if (flashRead (dev,
-				   sector << dev->lgSectorSize,
-				   (char *) buf, len) == ERROR) {
-			printf ("flashDiag: Read failed (dev: %d, sector: %d)\n",
-				DEV_NO (dev), sector);
-			goto done;
-		}
-
-		for (i = 0; i < len / 4; i++) {
-			if (buf[i] != (sector << 24 | i)) {
-				printf ("flashDiag: Verify error "
-					"(dev: %d, sector: %d, offset: 0x%x)\n",
-					DEV_NO (dev), sector, i);
-				printf ("flashDiag: Expected 0x%08x, got 0x%08x\n",
-					sector << 24 | i, buf[i]);
-
-				goto done;
-			}
-		}
-	}
-
-	printf ("flashDiag: Erasing\n");
-
-	if (flashErase (dev) == ERROR) {
-		printf ("flashDiag: Final erase failed\n");
-		goto done;
-	}
-
-	rv = OK;
-
-  done:
-	if (buf)
-		free (buf);
-
-	if (rv == OK)
-		printf ("flashDiag: Device %d passed\n", DEV_NO (dev));
-	else
-		printf ("flashDiag: Device %d failed\n", DEV_NO (dev));
-
-	return rv;
-}
-
-STATUS flashDiagAll (void)
-{
-	int i;
-	int rv = OK;
-
-	PRINTF ("flashDiagAll: devices=%d\n", flashDevCount);
-
-	for (i = 0; i < flashDevCount; i++) {
-		flash_dev_t *dev = &flashDev[i];
-
-		if (dev->found && flashDiag (dev) == ERROR)
-			rv = ERROR;
-	}
-
-	if (rv == OK)
-		printf ("flashDiagAll: Passed\n");
-	else
-		printf ("flashDiagAll: Failed because of earlier errors\n");
-
-	return OK;
-}
-
-
-/*-----------------------------------------------------------------------
- */
-unsigned long flash_init (void)
-{
-	unsigned long size = 0;
-	flash_dev_t *dev = NULL;
-
-	flashLibInit ();
-
-	/*
-	 * Provide info for FLASH (up to 960K) of Kernel Image data.
-	 */
-	dev = FLASH_DEV_BANK0_LOW;
-	flash_info[FLASH_BANK_KERNEL].flash_id =
-			(dev->vendorID << 16) | dev->deviceID;
-	flash_info[FLASH_BANK_KERNEL].sector_count = dev->sectors;
-	flash_info[FLASH_BANK_KERNEL].size =
-			flash_info[FLASH_BANK_KERNEL].sector_count * FLASH_SECTOR_SIZE;
-	flash_info[FLASH_BANK_KERNEL].start[FIRST_SECTOR] = dev->base;
-	size += flash_info[FLASH_BANK_KERNEL].size;
-
-	/*
-	 * Provide info for 512K PLCC FLASH ROM (U-Boot)
-	 */
-	dev = FLASH_DEV_BANK0_BOOT;
-	flash_info[FLASH_BANK_BOOT].flash_id =
-			(dev->vendorID << 16) | dev->deviceID;
-	flash_info[FLASH_BANK_BOOT].sector_count = dev->sectors;
-	flash_info[FLASH_BANK_BOOT].size =
-			flash_info[FLASH_BANK_BOOT].sector_count * FLASH_SECTOR_SIZE;
-	flash_info[FLASH_BANK_BOOT].start[FIRST_SECTOR] = dev->base;
-	size += flash_info[FLASH_BANK_BOOT].size;
-
-
-	/*
-	 * Provide info for 512K FLASH0 segment (U-Boot)
-	 */
-	dev = FLASH_DEV_BANK0_HIGH;
-	flash_info[FLASH_BANK_AUX].flash_id =
-			(dev->vendorID << 16) | dev->deviceID;
-	flash_info[FLASH_BANK_AUX].sector_count = dev->sectors;
-	flash_info[FLASH_BANK_AUX].size =
-			flash_info[FLASH_BANK_AUX].sector_count * FLASH_SECTOR_SIZE;
-	flash_info[FLASH_BANK_AUX].start[FIRST_SECTOR] = dev->base;
-	size += flash_info[FLASH_BANK_AUX].size;
-
-
-	return size;
-}
-
-/*
- * Get flash device from U-Boot flash info.
- */
-flash_dev_t *getFlashDevFromInfo (flash_info_t * info)
-{
-	int i;
-
-	if (!info)
-		return NULL;
-
-	for (i = 0; i < flashDevCount; i++) {
-		flash_dev_t *dev = &flashDev[i];
-
-		if (dev->found && (dev->base == info->start[0]))
-			return dev;
-	}
-	printf ("ERROR: notice, no FLASH mapped at address 0x%x\n",
-			(unsigned int) info->start[0]);
-	return NULL;
-}
-
-ulong flash_get_size (vu_long * addr, flash_info_t * info)
-{
-	int i;
-
-	for (i = 0; i < flashDevCount; i++) {
-		flash_dev_t *dev = &flashDev[i];
-
-		if (dev->found) {
-			if (dev->base == (unsigned int) addr) {
-				info->flash_id = (dev->vendorID << 16) | dev->deviceID;
-				info->sector_count = dev->sectors;
-				info->size = info->sector_count * FLASH_SECTOR_SIZE;
-				return dev->sectors * FLASH_SECTOR_SIZE;
-			}
-		}
-	}
-	return 0;
-}
-
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-	unsigned int chip;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch ((info->flash_id >> 16) & 0xff) {
-	case 0x1:
-		printf ("AMD ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-	chip = (unsigned int) info->flash_id & 0x000000ff;
-
-	switch (chip) {
-
-	case AMD_ID_F040B:
-		printf ("AM29F040B (4 Mbit)\n");
-		break;
-
-	case AMD_ID_LV160B:
-	case FLASH_AM160LV:
-	case 0x49:
-		printf ("AM29LV160B (16 Mbit / 2M x 8bit)\n");
-		break;
-
-	default:
-		printf ("Unknown Chip Type:0x%x\n", chip);
-		break;
-	}
-
-	printf ("  Size: %ld bytes in %d Sectors\n",
-		info->size, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[FIRST_SECTOR] + i * FLASH_SECTOR_SIZE,
-			info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-}
-
-
-/*
- * Erase a range of flash sectors.
- */
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int prot, sect;
-	flash_dev_t *dev = NULL;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	/* Start erase on unprotected sectors */
-	dev = getFlashDevFromInfo (info);
-	if (dev) {
-		printf ("Erase FLASH[%s] -%d sectors:", dev->name, dev->sectors);
-		for (sect = s_first; sect <= s_last; sect++) {
-			if (info->protect[sect] == 0) {	/* not protected */
-				printf (".");
-				if (ERROR == flashEraseSector (dev, sect)) {
-					printf ("ERROR: could not erase sector %d on FLASH[%s]\n", sect, dev->name);
-					return 1;
-				}
-			}
-		}
-	}
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
-
-	flash_dev_t *dev = getFlashDevFromInfo (info);
-	int addr = dest - info->start[0];
-
-	if (!dev)
-		return 1;
-
-	if (OK != flashWrite (dev, addr, (char *) &data, sizeof (ulong))) {
-		printf ("ERROR: could not write to addr=0x%x, data=0x%x\n",
-			(unsigned int) addr, (unsigned) data);
-		return 1;
-	}
-
-	if ((addr % FLASH_SECTOR_SIZE) == 0)
-		printf (".");
-
-
-	PRINTF ("write_word:0x%x, base=0x%x, addr=0x%x, data=0x%x\n",
-		(unsigned) info->start[0],
-		(unsigned) dest,
-		(unsigned) (dest - info->start[0]), (unsigned) data);
-
-	return (0);
-}
-
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-	flash_dev_t *dev = getFlashDevFromInfo (info);
-
-	if (dev) {
-		printf ("FLASH[%s]:", dev->name);
-		wp = (addr & ~3);	/* get lower word aligned address */
-
-		/*
-		 * handle unaligned start bytes
-		 */
-		if ((l = addr - wp) != 0) {
-			data = 0;
-			for (i = 0, cp = wp; i < l; ++i, ++cp) {
-				data = (data << 8) | (*(uchar *) cp);
-			}
-			for (; i < 4 && cnt > 0; ++i) {
-				data = (data << 8) | *src++;
-				--cnt;
-				++cp;
-			}
-			for (; cnt == 0 && i < 4; ++i, ++cp) {
-				data = (data << 8) | (*(uchar *) cp);
-			}
-			if ((rc = write_word (info, wp, data)) != 0) {
-				return (rc);
-			}
-			wp += 4;
-		}
-
-		/*
-		 * handle word aligned part
-		 */
-		while (cnt >= 4) {
-			data = 0;
-			for (i = 0; i < 4; ++i) {
-				data = (data << 8) | *src++;
-			}
-			if ((rc = write_word (info, wp, data)) != 0) {
-				return (rc);
-			}
-			wp += 4;
-			cnt -= 4;
-		}
-
-		if (cnt == 0) {
-			return (0);
-		}
-
-		/*
-		 * handle unaligned tail bytes
-		 */
-		data = 0;
-		for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
-			data = (data << 8) | *src++;
-			--cnt;
-		}
-		for (; i < 4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-
-		return (write_word (info, wp, data));
-	}
-	return 1;
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/mousse/flash.h b/board/mousse/flash.h
deleted file mode 100644
index b7e4619c01c..00000000000
--- a/board/mousse/flash.h
+++ /dev/null
@@ -1,78 +0,0 @@
-#ifndef	FLASH_LIB_H
-#define	FLASH_LIB_H
-
-#include <common.h>
-
-/* PIO operations max */
-#define	FLASH_PROGRAM_POLLS		100000
-
-/* 10 Seconds default */
-#define	FLASH_ERASE_SECTOR_TIMEOUT	(10*1000 /*SEC*/ )
-
-/* Flash device info structure */
-typedef struct flash_dev_s {
-    char        name[24];               /* Bank Name */
-    int		bank;			/* Bank 0 or 1 */
-    unsigned int base;			/* Base address */
-    int		sectors;		/* Sector count */
-    int		lgSectorSize;		/* Log2(usable bytes/sector) */
-    int		vendorID;		/* Expected vendor ID */
-    int		deviceID;		/* Expected device ID */
-    int		found;			/* Set if found by flashLibInit */
-    int		swap;			/* Set for bank 1 if byte swap req'd */
-} flash_dev_t;
-
-#define FLASH_MAX_POS(dev) \
-	((dev)->sectors << (dev)->lgSectorSize)
-
-#define FLASH_SECTOR_POS(dev, sector) \
-	((sector) << (dev)->lgSectorSize)
-
-/* AMD 29F040 */
-#define FLASH0_BANK			0
-#define FLASH0_VENDOR_ID		0x01
-#define FLASH0_DEVICE_ID		0x49
-
-/* AMD29LV160DB */
-#define FLASH1_BANK			1
-#define FLASH1_VENDOR_ID		0x0001
-#define FLASH1_DEVICE_ID		0x2249
-
-extern	flash_dev_t			flashDev[];
-extern	int				flashDevCount;
-
-/*
- * Device pointers
- *
- * These must be kept in sync with the table in flashLib.c.
- */
-#define FLASH_DEV_BANK0_SA0		(&flashDev[0])
-#define FLASH_DEV_BANK0_SA1		(&flashDev[1])
-#define FLASH_DEV_BANK0_SA2		(&flashDev[2])
-#define FLASH_DEV_BANK0_LOW		(&flashDev[3]) /* 960K */
-#define FLASH_DEV_BANK0_BOOT		(&flashDev[4]) /* PLCC */
-#define FLASH_DEV_BANK0_HIGH		(&flashDev[5]) /* 512K PLCC shadow */
-
-unsigned long flash_init(void);
-int flashEraseSector(flash_dev_t *dev, int sector);
-int flashErase(flash_dev_t *dev);
-int flashRead(flash_dev_t *dev, int pos, char *buf, int len);
-int flashWrite(flash_dev_t *dev, int pos, char *buf, int len);
-int flashWritable(flash_dev_t *dev, int pos, int len);
-int flashDiag(flash_dev_t *dev);
-int flashDiagAll(void);
-
-ulong flash_get_size (vu_long *addr, flash_info_t *info);
-void flash_print_info  (flash_info_t *info);
-int  flash_erase (flash_info_t *info, int s_first, int s_last);
-int  write_buff  (flash_info_t *info, uchar *src, ulong addr, ulong cnt);
-
-/*
- * Flash info indices.
- */
-#define FLASH_BANK_KERNEL 0
-#define FLASH_BANK_BOOT   1
-#define FLASH_BANK_AUX    2
-#define FIRST_SECTOR      0
-
-#endif	/* !FLASH_LIB_H */
diff --git a/board/mousse/m48t59y.c b/board/mousse/m48t59y.c
deleted file mode 100644
index 9a70dbeab16..00000000000
--- a/board/mousse/m48t59y.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * SGS M48-T59Y TOD/NVRAM Driver
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp.
- *
- * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * SGS M48-T59Y TOD/NVRAM Driver
- *
- * The SGS M48 an 8K NVRAM starting at offset M48_BASE_ADDR and
- * continuing for 8176 bytes. After that starts the Time-Of-Day (TOD)
- * registers which are used to set/get the internal date/time functions.
- *
- * This module implements Y2K compliance by taking full year numbers
- * and translating back and forth from the TOD 2-digit year.
- *
- * NOTE: for proper interaction with an operating system, the TOD should
- * be used to store Universal Coordinated Time (GMT) and timezone
- * conversions should be used.
- *
- * Here is a diagram of the memory layout:
- *
- * +---------------------------------------------+ 0xffe0a000
- * | Non-volatile memory                         | .
- * |                                             | .
- * | (8176 bytes of Non-volatile memory)         | .
- * |                                             | .
- * +---------------------------------------------+ 0xffe0bff0
- * | Flags                                       |
- * +---------------------------------------------+ 0xffe0bff1
- * | Unused                                      |
- * +---------------------------------------------+ 0xffe0bff2
- * | Alarm Seconds                               |
- * +---------------------------------------------+ 0xffe0bff3
- * | Alarm Minutes                               |
- * +---------------------------------------------+ 0xffe0bff4
- * | Alarm Date                                  |
- * +---------------------------------------------+ 0xffe0bff5
- * | Interrupts                                  |
- * +---------------------------------------------+ 0xffe0bff6
- * | WatchDog                                    |
- * +---------------------------------------------+ 0xffe0bff7
- * | Calibration                                 |
- * +---------------------------------------------+ 0xffe0bff8
- * | Seconds                                     |
- * +---------------------------------------------+ 0xffe0bff9
- * | Minutes                                     |
- * +---------------------------------------------+ 0xffe0bffa
- * | Hours                                       |
- * +---------------------------------------------+ 0xffe0bffb
- * | Day                                         |
- * +---------------------------------------------+ 0xffe0bffc
- * | Date                                        |
- * +---------------------------------------------+ 0xffe0bffd
- * | Month                                       |
- * +---------------------------------------------+ 0xffe0bffe
- * | Year (2 digits only)                        |
- * +---------------------------------------------+ 0xffe0bfff
- */
-#include <common.h>
-#include <rtc.h>
-#include "mousse.h"
-
-/*
- * Imported from mousse.h:
- *
- *   TOD_REG_BASE		Base of m48t59y TOD registers
- *   SYS_TOD_UNPROTECT()	Disable NVRAM write protect
- *   SYS_TOD_PROTECT()		Re-enable NVRAM write protect
- */
-
-#define YEAR		0xf
-#define MONTH		0xe
-#define DAY		0xd
-#define DAY_OF_WEEK	0xc
-#define HOUR		0xb
-#define MINUTE		0xa
-#define SECOND		0x9
-#define CONTROL		0x8
-#define WATCH		0x7
-#define INTCTL		0x6
-#define WD_DATE		0x5
-#define WD_HOUR		0x4
-#define WD_MIN		0x3
-#define WD_SEC		0x2
-#define _UNUSED		0x1
-#define FLAGS		0x0
-
-#define M48_ADDR	((volatile unsigned char *) TOD_REG_BASE)
-
-int m48_tod_init(void)
-{
-    SYS_TOD_UNPROTECT();
-
-    M48_ADDR[CONTROL] = 0;
-    M48_ADDR[WATCH] = 0;
-    M48_ADDR[INTCTL] = 0;
-
-    /*
-     * If the oscillator is currently stopped (as on a new part shipped
-     * from the factory), start it running.
-     *
-     * Here is an example of the TOD bytes on a brand new M48T59Y part:
-     *		00 00 00 00 00 00 00 00 00 88 8c c3 bf c8 f5 01
-     */
-
-    if (M48_ADDR[SECOND] & 0x80)
-	M48_ADDR[SECOND] = 0;
-
-    /* Is battery low */
-    if ( M48_ADDR[FLAGS] & 0x10) {
-	 printf("NOTICE: Battery low on Real-Time Clock (replace SNAPHAT).\n");
-    }
-
-    SYS_TOD_PROTECT();
-
-    return 0;
-}
-
-/*
- * m48_tod_set
- */
-
-static int to_bcd(int value)
-{
-    return value / 10 * 16 + value % 10;
-}
-
-static int from_bcd(int value)
-{
-    return value / 16 * 10 + value % 16;
-}
-
-static int day_of_week(int y, int m, int d)	/* 0-6 ==> Sun-Sat */
-{
-    static int t[] = {0, 3, 2, 5, 0, 3, 5, 1, 4, 6, 2, 4};
-    y -= m < 3;
-    return (y + y/4 - y/100 + y/400 + t[m-1] + d) % 7;
-}
-
-/*
- * Note: the TOD should store the current GMT
- */
-
-int m48_tod_set(int year,		/* 1980-2079 */
-		int month,		/* 01-12 */
-		int day,		/* 01-31 */
-		int hour,		/* 00-23 */
-		int minute,		/* 00-59 */
-		int second)		/* 00-59 */
-
-{
-    SYS_TOD_UNPROTECT();
-
-    M48_ADDR[CONTROL] |= 0x80;	/* Set WRITE bit */
-
-    M48_ADDR[YEAR] = to_bcd(year % 100);
-    M48_ADDR[MONTH] = to_bcd(month);
-    M48_ADDR[DAY] = to_bcd(day);
-    M48_ADDR[DAY_OF_WEEK] = day_of_week(year, month, day) + 1;
-    M48_ADDR[HOUR] = to_bcd(hour);
-    M48_ADDR[MINUTE] = to_bcd(minute);
-    M48_ADDR[SECOND] = to_bcd(second);
-
-    M48_ADDR[CONTROL] &= ~0x80;	/* Clear WRITE bit */
-
-    SYS_TOD_PROTECT();
-
-    return 0;
-}
-
-/*
- * Note: the TOD should store the current GMT
- */
-
-int m48_tod_get(int *year,		/* 1980-2079 */
-		int *month,		/* 01-12 */
-		int *day,		/* 01-31 */
-		int *hour,		/* 00-23 */
-		int *minute,		/* 00-59 */
-		int *second)		/* 00-59 */
-{
-    int y;
-
-    SYS_TOD_UNPROTECT();
-
-    M48_ADDR[CONTROL] |= 0x40;	/* Set READ bit */
-
-    y = from_bcd(M48_ADDR[YEAR]);
-    *year = y < 80 ? 2000 + y : 1900 + y;
-    *month = from_bcd(M48_ADDR[MONTH]);
-    *day = from_bcd(M48_ADDR[DAY]);
-    /* day_of_week = M48_ADDR[DAY_OF_WEEK] & 0xf; */
-    *hour = from_bcd(M48_ADDR[HOUR]);
-    *minute = from_bcd(M48_ADDR[MINUTE]);
-    *second = from_bcd(M48_ADDR[SECOND] & 0x7f);
-
-    M48_ADDR[CONTROL] &= ~0x40;	/* Clear READ bit */
-
-    SYS_TOD_PROTECT();
-
-    return 0;
-}
-
-int m48_tod_get_second(void)
-{
-    return from_bcd(M48_ADDR[SECOND] & 0x7f);
-}
-
-/*
- * Watchdog function
- *
- *  If usec is 0, the watchdog timer is disarmed.
- *
- *  If usec is non-zero, the watchdog timer is armed (or re-armed) for
- *    approximately usec microseconds (if the exact requested usec is
- *    not supported by the chip, the next higher available value is used).
- *
- *  Minimum watchdog timeout = 62500 usec
- *  Maximum watchdog timeout = 124 sec (124000000 usec)
- */
-
-void m48_watchdog_arm(int usec)
-{
-    int		mpy, res;
-
-    SYS_TOD_UNPROTECT();
-
-    if (usec == 0) {
-	res = 0;
-	mpy = 0;
-    } else if (usec < 2000000) {	/* Resolution: 1/16s if below 2s */
-	res = 0;
-	mpy = (usec + 62499) / 62500;
-    } else if (usec < 8000000) {	/* Resolution: 1/4s if below 8s */
-	res = 1;
-	mpy = (usec + 249999) / 250000;
-    } else if (usec < 32000000) {	/* Resolution: 1s if below 32s */
-	res = 2;
-	mpy = (usec + 999999) / 1000000;
-    } else {				/* Resolution: 4s up to 124s */
-	res = 3;
-	mpy = (usec + 3999999) / 4000000;
-	if (mpy > 31)
-	    mpy = 31;
-    }
-
-    M48_ADDR[WATCH] = (0x80 |		/* Steer to RST signal (IRQ = N/C) */
-		       mpy << 2 |
-		       res);
-
-    SYS_TOD_PROTECT();
-}
-
-/*
- * U-Boot RTC support.
- */
-int
-rtc_get( struct rtc_time *tmp )
-{
-	m48_tod_get(&tmp->tm_year,
-		    &tmp->tm_mon,
-		    &tmp->tm_mday,
-		    &tmp->tm_hour,
-		    &tmp->tm_min,
-		    &tmp->tm_sec);
-	tmp->tm_yday = 0;
-	tmp->tm_isdst= 0;
-
-#ifdef RTC_DEBUG
-	printf( "Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
-		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
-		tmp->tm_hour, tmp->tm_min, tmp->tm_sec );
-#endif
-
-	return 0;
-}
-
-int rtc_set( struct rtc_time *tmp )
-{
-	m48_tod_set(tmp->tm_year,		/* 1980-2079 */
-		    tmp->tm_mon,		/* 01-12 */
-		    tmp->tm_mday,              /* 01-31 */
-		    tmp->tm_hour,		/* 00-23 */
-		    tmp->tm_min,		/* 00-59 */
-		    tmp->tm_sec);		/* 00-59 */
-
-#ifdef RTC_DEBUG
-	printf( "Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
-		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
-		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-#endif
-
-	return 0;
-}
-
-void
-rtc_reset (void)
-{
-  m48_tod_init();
-}
diff --git a/board/mousse/m48t59y.h b/board/mousse/m48t59y.h
deleted file mode 100644
index 2c7c092d141..00000000000
--- a/board/mousse/m48t59y.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * SGS M48-T59Y TOD/NVRAM Driver
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp.
- *
- * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __M48_T59_Y_H
-#define __M48_T59_Y_H
-
-/*
- * M48 T59Y -Timekeeping Battery backed SRAM.
- */
-
-int m48_tod_init(void);
-
-int m48_tod_set(int year,
-		int month,
-		int day,
-		int hour,
-		int minute,
-		int second);
-
-int m48_tod_get(int *year,
-		int *month,
-		int *day,
-		int *hour,
-		int *minute,
-		int *second);
-
-int m48_tod_get_second(void);
-
-void m48_watchdog_arm(int usec);
-
-#endif /*!__M48_T59_Y_H */
diff --git a/board/mousse/mousse.c b/board/mousse/mousse.c
deleted file mode 100644
index e1724e657df..00000000000
--- a/board/mousse/mousse.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * MOUSSE Board Support
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2001
- * James Dougherty, jfd@cs.stanford.edu
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <netdev.h>
-#include <asm/processor.h>
-#include <timestamp.h>
-
-#include "mousse.h"
-#include "m48t59y.h"
-#include <pci.h>
-
-
-int checkboard (void)
-{
-	ulong busfreq = get_bus_freq (0);
-	char buf[32];
-
-	puts ("Board: MOUSSE MPC8240/KAHLUA - CHRP (MAP B)\n");
-	printf ("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
-	printf ("MPLD:  Revision %d\n", SYS_REVID_GET ());
-	printf ("Local Bus:  %s MHz\n", strmhz (buf, busfreq));
-
-	return 0;
-}
-
-int checkflash (void)
-{
-	printf ("checkflash\n");
-	flash_init ();
-	return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
-	return CONFIG_SYS_RAM_SIZE;
-}
-
-
-void get_tod (void)
-{
-	int year, month, day, hour, minute, second;
-
-	m48_tod_get (&year, &month, &day, &hour, &minute, &second);
-
-	printf ("  Current date/time: %d/%d/%d %d:%d:%d \n",
-		month, day, year, hour, minute, second);
-
-}
-
-/*
- * EPIC, PCI, and I/O devices.
- * Initialize Mousse Platform, probe for PCI devices,
- * Query configuration parameters if not set.
- */
-int misc_init_f (void)
-{
-	m48_tod_init ();	/* Init SGS M48T59Y TOD/NVRAM */
-	printf ("RTC:   M48T589 TOD/NVRAM (%d) bytes\n", TOD_NVRAM_SIZE);
-	get_tod ();
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	return pci_eth_init(bis);
-}
diff --git a/board/mousse/mousse.h b/board/mousse/mousse.h
deleted file mode 100644
index ce8a0541756..00000000000
--- a/board/mousse/mousse.h
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * MOUSSE/MPC8240 Board definitions.
- * For more info, see http://www.vooha.com/
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2001
- * James Dougherty (jfd@cs.stanford.edu)
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __MOUSSE_H
-#define __MOUSSE_H
-
-/* System addresses */
-
-#define PCI_SPECIAL_BASE	0xfe000000
-#define PCI_SPECIAL_SIZE	0x01000000
-
-/* PORTX Device Addresses for Mousse */
-
-#define PORTX_DEV_BASE		0xff000000
-#define PORTX_DEV_SIZE		0x01000000
-
-#define ENET_DEV_BASE		0x80000000
-
-#define PLD_REG_BASE		(PORTX_DEV_BASE | 0xe09000)
-#define PLD_REG(off)		(*(volatile unsigned char *) \
-				 (PLD_REG_BASE + (off)))
-
-#define PLD_REVID_B1		0x7f
-#define PLD_REVID_B2		0x01
-
-/* MPLD */
-#define SYS_HARD_RESET()	{ for (;;) PLD_REG(0) = 0; } /* clr 0x80 bit */
-#define SYS_REVID_GET()		((int) PLD_REG(0) & 0x7f)
-#define SYS_LED_OFF()		(PLD_REG(1) |= 0x80)
-#define SYS_LED_ON()		(PLD_REG(1) &= ~0x80)
-#define SYS_WATCHDOG_IRQ3()	(PLD_REG(2) |= 0x80)
-#define SYS_WATCHDOG_RESET()	(PLD_REG(2) &= ~0x80)
-#define SYS_TOD_PROTECT()	(PLD_REG(3) |= 0x80)
-#define SYS_TOD_UNPROTECT()	(PLD_REG(3) &= ~0x80)
-
-/* SGS M48T59Y */
-#define TOD_BASE		(PORTX_DEV_BASE | 0xe0a000)
-#define TOD_REG_BASE		(TOD_BASE | 0x1ff0)
-#define TOD_NVRAM_BASE		TOD_BASE
-#define TOD_NVRAM_SIZE		0x1ff0
-#define TOD_NVRAM_LIMIT		(TOD_NVRAM_BASE + TOD_NVRAM_SIZE)
-
-/* NS16552 SIO */
-#define SERIAL_BASE(_x)		(PORTX_DEV_BASE | 0xe08000 | ((_x) ? 0 : 0x80))
-#define N_SIO_CHANNELS		2
-#define N_COM_PORTS		N_SIO_CHANNELS
-
-/*
- * On-board Dec21143 PCI Ethernet
- * Note: The PCI MBAR chosen here was used from MPC8240UM which states
- * that PCI memory is at: 0x80000 - 0xFDFFFFFF, if AMBOR[CPU_FD_ALIAS]
- * is set, then PCI memory maps 1-1 with this address range in the
- * correct byte order.
- */
-#define PCI_ENET_IOADDR		0x80000000
-#define PCI_ENET_MEMADDR	0x80000000
-
-/*
- * Flash Memory Layout
- *
- *    2 MB Flash Bank 0 runs in 8-bit mode.  In Flash Bank 0, the 32 kB
- *    sector SA3 is obscured by the 32 kB serial/TOD access space, and
- *    the 64 kB sectors SA19-SA26 are obscured by the 512 kB PLCC
- *    containing the fixed boot ROM.  (If the 512 kB PLCC is
- *    deconfigured by jumper, this window to Flash Bank 0 becomes
- *    visible, but it still contains the fixed boot code and should be
- *    considered read-only).  Flash Bank 0 sectors SA0 (16 kB), SA1 (8
- *    kB), and SA2 (8 kB) are currently unused.
- *
- *    2 MB Flash Bank 1 runs in 16-bit mode.  Flash Bank 1 is fully
- *    usable, but it's a 16-bit wide device on a 64-bit bus.  Therefore
- *    16-bit words only exist at addresses that are multiples of 8.  All
- *    PROM data and control addresses must be multiplied by 8.
- *
- *    See flashMap.c for description of flash filesystem layout.
- */
-
-/*
- * FLASH memory address space: 8-bit wide FLASH memory spaces.
- */
-#define FLASH0_SEG0_START	0xffe00000	 /* Baby 32Kb segment */
-#define FLASH0_SEG0_END		0xffe07fff	 /* 16 kB + 8 kB + 8 kB */
-#define FLASH0_SEG0_SIZE	0x00008000	 /*   (sectors SA0-SA2) */
-
-#define FLASH0_SEG1_START	0xffe10000	 /* 1MB - 64Kb FLASH0 seg */
-#define FLASH0_SEG1_END		0xffefffff	 /* 960 kB */
-#define FLASH0_SEG1_SIZE	0x000f0000
-
-#define FLASH0_SEG2_START	0xfff00000	 /* Boot Loader stored here */
-#define FLASH0_SEG2_END		0xfff7ffff	 /* 512 kB FLASH0/PLCC seg */
-#define FLASH0_SEG2_SIZE	0x00080000
-
-#define FLASH0_SEG3_START	0xfff80000	 /* 512 kB FLASH0 seg */
-#define FLASH0_SEG3_END		0xffffffff
-#define FLASH0_SEG3_SIZE	0x00080000
-
-/* Where Kahlua starts */
-#define FLASH_RESET_VECT	0xfff00100
-
-/*
- * CHRP / PREP (MAP A/B) definitions.
- */
-
-#define PREP_REG_ADDR		0x80000cf8	/* MPC107 Config, Map A */
-#define PREP_REG_DATA		0x80000cfc	/* MPC107 Config, Map A */
-/* MPC107 (MPC8240 internal EUMBBAR mapped) */
-#define CHRP_REG_ADDR		0xfec00000	/* MPC106 Config, Map B */
-#define CHRP_REG_DATA		0xfee00000	/* MPC106 Config, Map B */
-
-/*
- * Mousse PCI IDSEL Assignments (Device Number)
- */
-#define MOUSSE_IDSEL_ENET	13		/* On-board 21143 Ethernet */
-#define MOUSSE_IDSEL_LPCI	14		/* On-board PCI slot */
-#define MOUSSE_IDSEL_82371	15		/* That other thing */
-#define MOUSSE_IDSEL_CPCI2	31		/* CPCI slot 2 */
-#define MOUSSE_IDSEL_CPCI3	30		/* CPCI slot 3 */
-#define MOUSSE_IDSEL_CPCI4	29		/* CPCI slot 4 */
-#define MOUSSE_IDSEL_CPCI5	28		/* CPCI slot 5 */
-#define MOUSSE_IDSEL_CPCI6	27		/* CPCI slot 6 */
-
-/*
- * Mousse Interrupt Mapping:
- *
- *	IRQ1	Enet (intA|intB|intC|intD)
- *	IRQ2	CPCI intA (See below)
- *	IRQ3	Local PCI slot intA|intB|intC|intD
- *	IRQ4	COM1 Serial port (Actually higher addressed port on duart)
- *
- * PCI Interrupt Mapping in CPCI chassis:
- *
- *		   |	       CPCI Slot
- *		   | 1 (CPU)	2	3	4	5	6
- *	-----------+--------+-------+-------+-------+-------+-------+
- *	  intA	   |	X		X		X
- *	  intB	   |		X		X		X
- *	  intC	   |	X		X		X
- *	  intD	   |		X		X		X
- */
-
-
-#define EPIC_VECTOR_EXT0	0
-#define EPIC_VECTOR_EXT1	1
-#define EPIC_VECTOR_EXT2	2
-#define EPIC_VECTOR_EXT3	3
-#define EPIC_VECTOR_EXT4	4
-#define EPIC_VECTOR_TM0		16
-#define EPIC_VECTOR_TM1		17
-#define EPIC_VECTOR_TM2		18
-#define EPIC_VECTOR_TM3		19
-#define EPIC_VECTOR_I2C		20
-#define EPIC_VECTOR_DMA0	21
-#define EPIC_VECTOR_DMA1	22
-#define EPIC_VECTOR_I2O		23
-
-
-#define INT_VEC_IRQ0		0
-#define INT_NUM_IRQ0		INT_VEC_IRQ0
-#define MOUSSE_IRQ_ENET		EPIC_VECTOR_EXT1	/* Hardwired */
-#define MOUSSE_IRQ_CPCI		EPIC_VECTOR_EXT2	/* Hardwired */
-#define MOUSSE_IRQ_LPCI		EPIC_VECTOR_EXT3	/* Hardwired */
-#define MOUSSE_IRQ_DUART	EPIC_VECTOR_EXT4	/* Hardwired */
-
-/* Onboard DEC 21143 Ethernet */
-#define PCI_ENET_MEMADDR	0x80000000
-#define PCI_ENET_IOADDR		0x80000000
-
-/* Some other PCI device */
-#define PCI_SLOT_MEMADDR	0x81000000
-#define PCI_SLOT_IOADDR		0x81000000
-
-/* Promise ATA66 PCI Device (ATA controller) */
-#define PROMISE_MBAR0  0xa0000000
-#define PROMISE_MBAR1  (PROMISE_MBAR0 + 0x1000)
-#define PROMISE_MBAR2  (PROMISE_MBAR0 + 0x2000)
-#define PROMISE_MBAR3  (PROMISE_MBAR0 + 0x3000)
-#define PROMISE_MBAR4  (PROMISE_MBAR0 + 0x4000)
-#define PROMISE_MBAR5  (PROMISE_MBAR0 + 0x5000)
-
-/* ATA/66 Controller offsets */
-#define CONFIG_SYS_ATA_BASE_ADDR     PROMISE_MBAR0
-#define CONFIG_SYS_IDE_MAXBUS	       2 /* ide0/ide1 */
-#define CONFIG_SYS_IDE_MAXDEVICE      2 /* 2 drives per controller */
-#define CONFIG_SYS_ATA_IDE0_OFFSET    0
-#define CONFIG_SYS_ATA_IDE1_OFFSET    0x3000
-/*
- * Definitions for accessing IDE controller registers
- */
-#define CONFIG_SYS_ATA_DATA_OFFSET    0
-#define CONFIG_SYS_ATA_REG_OFFSET     0
-#define CONFIG_SYS_ATA_ALT_OFFSET    (0x1000)
-
-/*
- * The constants ROM_TEXT_ADRS, ROM_SIZE, RAM_HIGH_ADRS, and RAM_LOW_ADRS
- * are defined in config.h and Makefile.
- * All definitions for these constants must be identical.
- */
-#define ROM_BASE_ADRS		0xfff00000	/* base address of ROM */
-#define ROM_TEXT_ADRS		(ROM_BASE_ADRS+0x0100) /* with PC & SP */
-#define ROM_WARM_ADRS		(ROM_TEXT_ADRS+0x0004) /* warm reboot entry */
-#define ROM_SIZE		0x00080000	/* 512KB ROM space */
-#define RAM_LOW_ADRS		0x00010000   /* RAM address for vxWorks */
-#define RAM_HIGH_ADRS		0x00c00000   /* RAM address for bootrom */
-
-/*
- *  NVRAM configuration
- *  NVRAM is implemented via the SGS Thomson M48T59Y
- *  64Kbit (8Kbx8) Timekeeper SRAM.
- *  This 8KB NVRAM also has a TOD. See m48t59y.{h,c} for more information.
- */
-
-#define NV_RAM_ADRS		TOD_NVRAM_BASE
-#define NV_RAM_INTRVL		1
-#define NV_RAM_WR_ENBL		SYS_TOD_UNPROTECT()
-#define NV_RAM_WR_DSBL		SYS_TOD_PROTECT()
-
-#define NV_OFF_BOOT0		0x0000	/* Boot string 0 (256b) */
-#define NV_OFF_BOOT1		0x0100	/* Boot string 1 (256b) */
-#define NV_OFF_BOOT2		0x0200	/* Boot string 2 (256b)*/
-#define NV_OFF_MACADDR		0x0400	/* 21143 MAC address (6b) */
-#define NV_OFF_ACTIVEBOOT	0x0406	/* Active boot string, 0 to 2 (1b) */
-#define NV_OFF_UNUSED1		0x0407	/* Unused (1b) */
-#define NV_OFF_BINDFIX		0x0408	/* See sysLib.c:sysBindFix() (1b) */
-#define NV_OFF_UNUSED2		0x0409	/* Unused (7b) */
-#define NV_OFF_TIMEZONE		0x0410	/* TIMEZONE env var (64b) */
-#define NV_OFF_VXWORKS_END	0x07FF	/* 2047 VxWorks Total */
-#define NV_OFF_U_BOOT		0x0800	/* 2048 U-Boot boot-loader */
-#define NV_OFF_U_BOOT_ADDR	(TOD_BASE + NV_OFF_U_BOOT) /* sysaddr*/
-#define NV_U_BOOT_ENV_SIZE	2048	/* 2K - U-Boot Total */
-#define NV_OFF__next_free	(NV_U_BOOT_ENVSIZE +1)
-#define NV_RAM_SIZE		8176	/* NVRAM End */
-
-#endif /* __MOUSSE_H */
diff --git a/board/mousse/pci.c b/board/mousse/pci.c
deleted file mode 100644
index a64144b1302..00000000000
--- a/board/mousse/pci.c
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2001
- * James Dougherty (jfd@cs.stanford.edu)
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * PCI Configuration space access support for MPC824x/MPC107 PCI Bridge
- */
-#include <common.h>
-#include <mpc824x.h>
-#include <pci.h>
-
-#include "mousse.h"
-
-/*
- * Promise ATA/66 support.
- */
-#define XFER_PIO_4	0x0C	/* 0000|1100 */
-#define XFER_PIO_3	0x0B	/* 0000|1011 */
-#define XFER_PIO_2	0x0A	/* 0000|1010 */
-#define XFER_PIO_1	0x09	/* 0000|1001 */
-#define XFER_PIO_0	0x08	/* 0000|1000 */
-#define XFER_PIO_SLOW	0x00	/* 0000|0000 */
-
-/* Promise Regs */
-#define REG_A		0x01
-#define REG_B		0x02
-#define REG_C		0x04
-#define REG_D		0x08
-
-void
-pdc202xx_decode_registers (unsigned char registers, unsigned char value)
-{
-	unsigned char	bit = 0, bit1 = 0, bit2 = 0;
-	switch(registers) {
-		case REG_A:
-			bit2 = 0;
-			printf("  A Register ");
-			if (value & 0x80) printf("SYNC_IN ");
-			if (value & 0x40) printf("ERRDY_EN ");
-			if (value & 0x20) printf("IORDY_EN ");
-			if (value & 0x10) printf("PREFETCH_EN ");
-			if (value & 0x08) { printf("PA3 ");bit2 |= 0x08; }
-			if (value & 0x04) { printf("PA2 ");bit2 |= 0x04; }
-			if (value & 0x02) { printf("PA1 ");bit2 |= 0x02; }
-			if (value & 0x01) { printf("PA0 ");bit2 |= 0x01; }
-			printf("PIO(A) = %d ", bit2);
-			break;
-		case REG_B:
-			bit1 = 0;bit2 = 0;
-			printf("  B Register ");
-			if (value & 0x80) { printf("MB2 ");bit1 |= 0x80; }
-			if (value & 0x40) { printf("MB1 ");bit1 |= 0x40; }
-			if (value & 0x20) { printf("MB0 ");bit1 |= 0x20; }
-			printf("DMA(B) = %d ", bit1 >> 5);
-			if (value & 0x10) printf("PIO_FORCED/PB4 ");
-			if (value & 0x08) { printf("PB3 ");bit2 |= 0x08; }
-			if (value & 0x04) { printf("PB2 ");bit2 |= 0x04; }
-			if (value & 0x02) { printf("PB1 ");bit2 |= 0x02; }
-			if (value & 0x01) { printf("PB0 ");bit2 |= 0x01; }
-			printf("PIO(B) = %d ", bit2);
-			break;
-		case REG_C:
-			bit2 = 0;
-			printf("  C Register ");
-			if (value & 0x80) printf("DMARQp ");
-			if (value & 0x40) printf("IORDYp ");
-			if (value & 0x20) printf("DMAR_EN ");
-			if (value & 0x10) printf("DMAW_EN ");
-
-			if (value & 0x08) { printf("MC3 ");bit2 |= 0x08; }
-			if (value & 0x04) { printf("MC2 ");bit2 |= 0x04; }
-			if (value & 0x02) { printf("MC1 ");bit2 |= 0x02; }
-			if (value & 0x01) { printf("MC0 ");bit2 |= 0x01; }
-			printf("DMA(C) = %d ", bit2);
-			break;
-		case REG_D:
-			printf("  D Register ");
-			break;
-		default:
-			return;
-	}
-	printf("\n        %s ", (registers & REG_D) ? "DP" :
-				(registers & REG_C) ? "CP" :
-				(registers & REG_B) ? "BP" :
-				(registers & REG_A) ? "AP" : "ERROR");
-	for (bit=128;bit>0;bit/=2)
-		printf("%s", (value & bit) ? "1" : "0");
-	printf("\n");
-}
-
-/*
- * Promise ATA/66 Support: configure Promise ATA66 card in specified mode.
- */
-int
-pdc202xx_tune_chipset (pci_dev_t dev, int drive, unsigned char speed)
-{
-	unsigned short		drive_conf;
-	int			err = 0;
-	unsigned char			drive_pci, AP, BP, CP, DP;
-	unsigned char			TA = 0, TB = 0;
-
-	switch (drive) {
-		case 0: drive_pci = 0x60; break;
-		case 1: drive_pci = 0x64; break;
-		case 2: drive_pci = 0x68; break;
-		case 3: drive_pci = 0x6c; break;
-		default: return -1;
-	}
-
-	pci_read_config_word(dev, drive_pci, &drive_conf);
-	pci_read_config_byte(dev, (drive_pci), &AP);
-	pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
-	pci_read_config_byte(dev, (drive_pci)|0x02, &CP);
-	pci_read_config_byte(dev, (drive_pci)|0x03, &DP);
-
-	if ((AP & 0x0F) || (BP & 0x07)) {
-	  /* clear PIO modes of lower 8421 bits of A Register */
-	  pci_write_config_byte(dev, (drive_pci), AP & ~0x0F);
-	  pci_read_config_byte(dev, (drive_pci), &AP);
-
-	  /* clear PIO modes of lower 421 bits of B Register */
-	  pci_write_config_byte(dev, (drive_pci)|0x01, BP & ~0x07);
-	  pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
-
-	  pci_read_config_byte(dev, (drive_pci), &AP);
-	  pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
-	}
-
-	pci_read_config_byte(dev, (drive_pci), &AP);
-	pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
-	pci_read_config_byte(dev, (drive_pci)|0x02, &CP);
-
-	switch(speed) {
-		case XFER_PIO_4:	TA = 0x01; TB = 0x04; break;
-		case XFER_PIO_3:	TA = 0x02; TB = 0x06; break;
-		case XFER_PIO_2:	TA = 0x03; TB = 0x08; break;
-		case XFER_PIO_1:	TA = 0x05; TB = 0x0C; break;
-		case XFER_PIO_0:
-		default:		TA = 0x09; TB = 0x13; break;
-	}
-
-	pci_write_config_byte(dev, (drive_pci), AP|TA);
-	pci_write_config_byte(dev, (drive_pci)|0x01, BP|TB);
-
-	pci_read_config_byte(dev, (drive_pci), &AP);
-	pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
-	pci_read_config_byte(dev, (drive_pci)|0x02, &CP);
-	pci_read_config_byte(dev, (drive_pci)|0x03, &DP);
-
-
-#ifdef PDC202XX_DEBUG
-	pdc202xx_decode_registers(REG_A, AP);
-	pdc202xx_decode_registers(REG_B, BP);
-	pdc202xx_decode_registers(REG_C, CP);
-	pdc202xx_decode_registers(REG_D, DP);
-#endif
-	return err;
-}
-/*
- * Show/Init PCI devices on the specified bus number.
- */
-
-void pci_mousse_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
-{
-	unsigned int line;
-
-	switch(PCI_DEV(dev)) {
-	case 0x0d:
-		line = 0x00000101;
-		break;
-
-	case 0x0e:
-	default:
-		line = 0x00000303;
-		break;
-	}
-
-	pci_write_config_dword(dev, PCI_INTERRUPT_LINE, line);
-}
-
-void pci_mousse_setup_pdc202xx(struct pci_controller *hose, pci_dev_t dev,
-			       struct pci_config_table *_)
-{
-	unsigned short vendorId;
-	unsigned int mbar0, cmd;
-	int bar, a;
-
-	pci_read_config_word(dev, PCI_VENDOR_ID, &vendorId);
-
-	if(vendorId == PCI_VENDOR_ID_PROMISE || vendorId == PCI_VENDOR_ID_CMD){
-		/* PDC 202xx card is handled differently, it is a bootable
-		 * device and needs all 5 MBAR's configured
-		 */
-		for(bar = 0; bar < 5; bar++){
-			pci_read_config_dword(dev, PCI_BASE_ADDRESS_0+bar*4, &mbar0);
-			pci_write_config_dword(dev, PCI_BASE_ADDRESS_0+bar*4, ~0);
-			pci_read_config_dword(dev, PCI_BASE_ADDRESS_0+bar*4, &mbar0);
-#ifdef DEBUG
-			printf("  ATA_bar[%d] = %dbytes\n", bar,
-			       ~(mbar0 & PCI_BASE_ADDRESS_MEM_MASK) + 1);
-#endif
-		}
-
-		/* Program all BAR's */
-		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, PROMISE_MBAR0);
-		pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, PROMISE_MBAR1);
-		pci_write_config_dword(dev, PCI_BASE_ADDRESS_2,	PROMISE_MBAR2);
-		pci_write_config_dword(dev, PCI_BASE_ADDRESS_3,	PROMISE_MBAR3);
-		pci_write_config_dword(dev, PCI_BASE_ADDRESS_4,	PROMISE_MBAR4);
-		pci_write_config_dword(dev, PCI_BASE_ADDRESS_5,	PROMISE_MBAR5);
-
-		for(bar = 0; bar < 5; bar++){
-			pci_read_config_dword(dev, PCI_BASE_ADDRESS_0+bar*4, &mbar0);
-#ifdef DEBUG
-			printf("  ATA_bar[%d]@0x%x\n", bar, mbar0);
-#endif
-		}
-
-		/* Enable ROM Expansion base */
-		pci_write_config_dword(dev, PCI_ROM_ADDRESS, PROMISE_MBAR5|1);
-
-		/* Io enable, Memory enable, master enable */
-		pci_read_config_dword(dev, PCI_COMMAND, &cmd);
-		cmd &= ~0xffff0000;
-		cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
-		pci_write_config_dword(dev, PCI_COMMAND, cmd);
-
-		/* Breath some life into the controller */
-		for( a = 0; a < 4; a++)
-			pdc202xx_tune_chipset(dev, a, XFER_PIO_0);
-	}
-}
-
-static struct pci_config_table pci_sandpoint_config_table[] = {
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 0x0e, 0x00,
-	  pci_mousse_setup_pdc202xx },
-#ifndef CONFIG_PCI_PNP
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 0x0d, 0x00,
-	  pci_cfgfunc_config_device, {PCI_ENET_IOADDR,
-				      PCI_ENET_MEMADDR,
-				      PCI_COMMAND_MEMORY |
-				      PCI_COMMAND_MASTER}},
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	  pci_cfgfunc_config_device, {PCI_SLOT_IOADDR,
-				      PCI_SLOT_MEMADDR,
-				      PCI_COMMAND_MEMORY |
-				      PCI_COMMAND_MASTER}},
-#endif
-	{ }
-};
-
-struct pci_controller hose = {
-	config_table: pci_sandpoint_config_table,
-	fixup_irq: pci_mousse_fixup_irq,
-};
-
-void pci_init_board(void)
-{
-	pci_mpc824x_init(&hose);
-}
diff --git a/board/mousse/u-boot.lds b/board/mousse/u-boot.lds
deleted file mode 100644
index f49161c67f8..00000000000
--- a/board/mousse/u-boot.lds
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  .text      :
-  {
-    arch/powerpc/cpu/mpc824x/start.o	(.text*)
-    *(.text*)
-    . = ALIGN(16);
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/mousse/u-boot.lds.ram b/board/mousse/u-boot.lds.ram
deleted file mode 100644
index c0281311c59..00000000000
--- a/board/mousse/u-boot.lds.ram
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2000
- * Rob Taylor, Flying Pig Systems Ltd. robt@flyingpig.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-MEMORY {
-	ram  (!rx) : org = 0x00000000 , LENGTH = 8M
-	code (!rx) : org = 0x00002000 , LENGTH = (4M - 0x2000)
-	rom   (rx) : org = 0xfff00000 , LENGTH = 512K
-}
-
-SECTIONS
-{
-  _f_init = .;
-  PROVIDE(_f_init = .);
-  _f_init_rom = .;
-  PROVIDE(_f_init_rom = .);
-
-  .init : {
-      arch/powerpc/cpu/mpc824x/start.o	(.text)
-      *(.init)
-  } > ram
-  _init_size = SIZEOF(.init);
-  PROVIDE(_init_size = SIZEOF(.init));
-
-  ENTRY(_start)
-
-/*  _ftext = .;
-  _ftext_rom = .;
-  _text_size = SIZEOF(.text);
- */
-  .text : {
-      *(.text)
-      *(.got1)
-      } > ram
-  .rodata : { *(.rodata) } > ram
-  .dtors : { *(.dtors) } > ram
-  .data : { *(.data) } > ram
-  .sdata : { *(.sdata) } > ram
-  .sdata2 : { *(.sdata2)
-      *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-    } > ram
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .sbss : { *(.sbss) } > ram
-  .sbss2 : { *(.sbss2) } > ram
-  .bss : { *(.bss) } > ram
-  .debug : { *(.debug) } > ram
-  .line : { *(.line) } > ram
-  .symtab : { *(.symtab) } > ram
-  .shrstrtab : { *(.shstrtab) } > ram
-  .strtab : { *(.strtab) } > ram
- /* .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  } > ram
-  */
-
-
-   __start___ex_table = .;
-    __ex_table : { *(__ex_table) } > ram
-    __stop___ex_table = .;
-
-
-  .ppcenv	:
-  {
-    common/env_embedded.o (.ppcenv)
-  } > ram
-
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/mousse/u-boot.lds.rom b/board/mousse/u-boot.lds.rom
deleted file mode 100644
index f162ae365ba..00000000000
--- a/board/mousse/u-boot.lds.rom
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    arch/powerpc/cpu/mpc824x/start.o	(.text)
-	 common/board.o (.text)
-    arch/powerpc/lib/ppcstring.o	(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-    lib/zlib.o		(.text)
-
-		. = env_offset;
-    common/env_embedded.o (.text)
-
-		*(.text)
-
-    *(.got1)
-    . = ALIGN(16);
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-
-  __bss_end = . ;
-  PROVIDE (end = .);
-}