diff options
| author | Stephen Warren <swarren@nvidia.com> | 2011-10-06 12:52:22 +0000 |
|---|---|---|
| committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2011-12-09 17:30:08 +0100 |
| commit | 5fac236a9703827666df452f093d2849625afd4d (patch) | |
| tree | b1728dc8a0291ac1411234a40260a032908e769a /board/nvidia/seaboard | |
| parent | d5ef19b9b349dc87611357be22e563a99528a422 (diff) | |
tegra2: Use new GPIO APIs in gpio_config_uart()
... rather than open-coding the register accesses.
However, gpio_request() typically stores the "label" parameter in a global
data structure. This causes problems when called from gpio_config_uart(),
since the code is running before relocation. To solve this, pass a NULL
string to gpio_request(), and modify gpio_request() not to touch the string
if it's NULL.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Diffstat (limited to 'board/nvidia/seaboard')
| -rw-r--r-- | board/nvidia/seaboard/seaboard.c | 18 |
1 files changed, 2 insertions, 16 deletions
diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c index aa77f12ef54..7f2827b8be0 100644 --- a/board/nvidia/seaboard/seaboard.c +++ b/board/nvidia/seaboard/seaboard.c @@ -37,23 +37,9 @@ */ static void gpio_config_uart_seaboard(void) { - int gp = GPIO_PI3; - struct gpio_ctlr *gpio = (struct gpio_ctlr *)NV_PA_GPIO_BASE; - struct gpio_ctlr_bank *bank = &gpio->gpio_bank[GPIO_BANK(gp)]; - u32 val; - /* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */ - val = readl(&bank->gpio_config[GPIO_PORT(gp)]); - val |= 1 << GPIO_BIT(gp); - writel(val, &bank->gpio_config[GPIO_PORT(gp)]); - - val = readl(&bank->gpio_out[GPIO_PORT(gp)]); - val &= ~(1 << GPIO_BIT(gp)); - writel(val, &bank->gpio_out[GPIO_PORT(gp)]); - - val = readl(&bank->gpio_dir_out[GPIO_PORT(gp)]); - val |= 1 << GPIO_BIT(gp); - writel(val, &bank->gpio_dir_out[GPIO_PORT(gp)]); + gpio_request(GPIO_PI3, NULL); + gpio_direction_output(GPIO_PI3, 0); } void gpio_config_uart(void) |