Coding Style cleanup

5 files changed, 170 insertions, 180 deletions

diff --git a/board/omap2420h4/config.mk b/board/omap2420h4/config.mk
index 1c770f30acd..4f14be84428 100644
--- a/board/omap2420h4/config.mk
+++ b/board/omap2420h4/config.mk
@@ -20,7 +20,6 @@ TEXT_BASE = 0x80e80000
 # Used with full SRAM boot.
 # This is either with a GP system or a signed boot image.
 # easiest, and safest way to go if you can.
-# Comment out //CONFIG_PARTIAL_SRAM for this one.
+# Comment out CONFIG_PARTIAL_SRAM for this one.
 #
 #TEXT_BASE = 0x40280000
-
diff --git a/board/omap2420h4/mem.c b/board/omap2420h4/mem.c
index a3b34536062..5e23d61308d 100644
--- a/board/omap2420h4/mem.c
+++ b/board/omap2420h4/mem.c
@@ -284,10 +284,10 @@ void gpmc_init(void)
 	__raw_writel(0x0, GPMC_CONFIG7_0);	/* disable current map */
 	sdelay(1000);
 	__raw_writel(H4_24XX_GPMC_CONFIG1_0|mux|mtype|mwidth, GPMC_CONFIG1_0);
-	//__raw_writel(H4_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0);
+	/* __raw_writel(H4_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0); */
 	__raw_writel(H4_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_0);
 	__raw_writel(H4_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0);
-	//__raw_writel(H4_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0);
+	/* __raw_writel(H4_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0); */
 	__raw_writel(H4_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0);/* enable new mapping */
 	sdelay(2000);
 
@@ -303,4 +303,3 @@ void gpmc_init(void)
 	__raw_writel(H4_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1); /* enable mapping */
 	sdelay(2000);
 }
-
diff --git a/board/omap2420h4/omap2420h4.c b/board/omap2420h4/omap2420h4.c
index 4696a713300..bf398f6efcb 100644
--- a/board/omap2420h4/omap2420h4.c
+++ b/board/omap2420h4/omap2420h4.c
@@ -333,11 +333,11 @@ void muxSetupI2C1(void)
 
 	/* I2C1 Clock pin configuration, PIN = M19 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SCL;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* I2C1 Data pin configuration, PIN = L15 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SDA;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* Pull-up required on data line */
 	/* external pull-up already present. */
@@ -379,91 +379,91 @@ void muxSetupLCD(void)
 
 	/* LCD_D0 pin configuration, PIN = Y7  */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D0;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_D1 pin configuration, PIN = P10 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D1;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_D2 pin configuration, PIN = V8  */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D2;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_D3 pin configuration, PIN = Y8  */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D3;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_D4 pin configuration, PIN = W8  */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D4;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_D5 pin configuration, PIN = R10 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D5;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_D6 pin configuration, PIN = Y9  */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D6;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_D7 pin configuration, PIN = V9  */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D7;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_D8 pin configuration, PIN = W9  */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D8;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_D9 pin configuration, PIN = P11 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D9;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_D10 pin configuration, PIN = V10 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D10;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_D11 pin configuration, PIN = Y10 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D11;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_D12 pin configuration, PIN = W10 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D12;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_D13 pin configuration, PIN = R11 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D13;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_D14 pin configuration, PIN = V11 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D14;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_D15 pin configuration, PIN = W11 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D15;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_D16 pin configuration, PIN = P12 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D16;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_D17 pin configuration, PIN = R12 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D17;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_PCLK pin configuration,   PIN = W6   */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_PCLK;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_VSYNC pin configuration,  PIN = V7  */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_VSYNC;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_HSYNC pin configuration,  PIN = Y6  */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_HSYNC;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* LCD_ACBIAS pin configuration, PIN = W7 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_ACBIAS;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 }
 
 /****************************************
@@ -477,63 +477,63 @@ void muxSetupCamera(void)
 	/* CAMERA_RSTZ  pin configuration, PIN = Y16 */
 	/* CAM_RST is connected through the I2C IO expander.*/
 	/* MuxConfigReg = (volatile unsigned char *), CONTROL_PADCONF_SYS_NRESWARM*/
-	/* *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled   */
+	/* *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled   */
 
 	/* CAMERA_XCLK  pin configuration, PIN = U3 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_XCLK;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* CAMERA_LCLK  pin configuration, PIN = V5 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_LCLK;
-	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* CAMERA_VSYNC pin configuration, PIN = U2 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_VS,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* CAMERA_HSYNC pin configuration, PIN = T3 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_HS,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* CAMERA_DAT0 pin configuration, PIN = T4 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D0,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* CAMERA_DAT1 pin configuration, PIN = V2 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D1,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* CAMERA_DAT2 pin configuration, PIN = V3 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D2,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* CAMERA_DAT3 pin configuration, PIN = U4 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D3,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* CAMERA_DAT4 pin configuration, PIN = W2 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D4,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* CAMERA_DAT5 pin configuration, PIN = V4 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D5,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* CAMERA_DAT6 pin configuration, PIN = W3 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D6,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* CAMERA_DAT7 pin configuration, PIN = Y2 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D7,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* CAMERA_DAT8 pin configuration, PIN = Y4 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D8,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* CAMERA_DAT9 pin configuration, PIN = V6 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D9,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 }
 
 /****************************************
@@ -546,70 +546,70 @@ void muxSetupMMCSD(void)
 
 	/* SDMMC_CLKI pin configuration,  PIN = H15 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKI,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* SDMMC_CLKO pin configuration,  PIN = G19 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKO,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* SDMMC_CMD pin configuration,   PIN = H18 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
-	// External pull-ups are present.
-	// *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+	/* External pull-ups are present. */
+	/* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
 
 	/* SDMMC_DAT0 pin configuration,  PIN = F20 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT0,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
-	// External pull-ups are present.
-	// *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+	/* External pull-ups are present. */
+	/* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
 
 	/* SDMMC_DAT1 pin configuration,  PIN = H14 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT1,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
-	// External pull-ups are present.
-	// *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+	/* External pull-ups are present. */
+	/* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
 
 	/* SDMMC_DAT2 pin configuration,  PIN = E19 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT2,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
-	// External pull-ups are present.
-	// *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+	/* External pull-ups are present. */
+	/* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
 
 	/* SDMMC_DAT3 pin configuration,  PIN = D19 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT3,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
-	// External pull-ups are present.
-	// *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+	/* External pull-ups are present. */
+	/* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
 
 	/* SDMMC_DDIR0 pin configuration, PIN = F19 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR0,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* SDMMC_DDIR1 pin configuration, PIN = E20 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR1,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* SDMMC_DDIR2 pin configuration, PIN = F18 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR2,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* SDMMC_DDIR3 pin configuration, PIN = E18 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR3,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* SDMMC_CDIR pin configuration,  PIN = G18 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD_DIR,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* MMC_CD pin configuration,      PIN = B3  ---2420IP ONLY---*/
 	/* MMC_CD for 2422IP=K1 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A14,
-				   *MuxConfigReg = 0x03 ; // Mode = 3, PUPD=Disabled
+				   *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
 
 	/* MMC_WP pin configuration,      PIN = B4  */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A13,
-				   *MuxConfigReg = 0x03 ; // Mode = 3, PUPD=Disabled
+				   *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
 }
 
 /******************************************
@@ -622,23 +622,23 @@ void muxSetupTouchScreen(void)
 
 	/* SPI1_CLK pin configuration,  PIN = U18 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_CLK,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* SPI1_MOSI pin configuration, PIN = V20 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SIMO,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* SPI1_MISO pin configuration, PIN = T18 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SOMI,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* SPI1_nCS0 pin configuration, PIN = U19 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_NCS0,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 
 	/* PEN_IRQ pin configuration,   PIN = P20 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MCBSP1_FSR,
-				   *MuxConfigReg = 0x03 ; // Mode = 3, PUPD=Disabled
+				   *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
 }
 
 /****************************************
@@ -651,7 +651,7 @@ void muxSetupHDQ(void)
 
 	/* HDQ_SIO pin configuration,  PIN = N18 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_HDQ_SIO,
-				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
 }
 
 /***************************************************************
@@ -830,5 +830,3 @@ void update_mux(u32 btype,u32 mtype)
 		}
 	}
 }
-
-
diff --git a/board/omap2420h4/platform.S b/board/omap2420h4/platform.S
index 3728e846cdc..dc1b443713f 100644
--- a/board/omap2420h4/platform.S
+++ b/board/omap2420h4/platform.S
@@ -15,7 +15,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -41,109 +41,109 @@ _TEXT_BASE:
  *************************************************************************/
 .global cpy_clk_code
  cpy_clk_code:
-        /* Copy DPLL code into SRAM */ 
-        adr     r0, go_to_speed         /* get addr of clock setting code */
-        mov     r2, #384                /* r2 size to copy (div by 32 bytes) */
-        mov     r1, r1                  /* r1 <- dest address (passed in) */
-        add     r2, r2, r0              /* r2 <- source end address */
+	/* Copy DPLL code into SRAM */
+	adr	r0, go_to_speed		/* get addr of clock setting code */
+	mov	r2, #384		/* r2 size to copy (div by 32 bytes) */
+	mov	r1, r1			/* r1 <- dest address (passed in) */
+	add	r2, r2, r0		/* r2 <- source end address */
 next2:
-        ldmia   r0!, {r3-r10}           /* copy from source address [r0]    */
-        stmia   r1!, {r3-r10}           /* copy to   target address [r1]    */
-        cmp     r0, r2                  /* until source end address [r2]    */
-        bne     next2
-	mov	pc, lr                  /* back to caller */
+	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
+	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
+	cmp	r0, r2			/* until source end address [r2]    */
+	bne	next2
+	mov	pc, lr			/* back to caller */
 
-/* **************************************************************************** 
+/* ****************************************************************************
  *  go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
- *               -executed from SRAM.
+ *		 -executed from SRAM.
  *  R0 = PRCM_CLKCFG_CTRL - addr of valid reg
  *  R1 = CM_CLKEN_PLL - addr dpll ctlr reg
  *  R2 = dpll value
  *  R3 = CM_IDLEST_CKGEN - addr dpll lock wait
- ******************************************************************************/    
+ ******************************************************************************/
 .global go_to_speed
  go_to_speed:
-        sub     sp, sp, #0x4 /* get some stack space */
-        str     r4, [sp]     /* save r4's value */
-
-        /* move into fast relock bypass */
-        ldr     r8, pll_ctl_add
-        mov     r4, #0x2
-        str     r4, [r8]
-        ldr     r4, pll_stat
+	sub	sp, sp, #0x4 /* get some stack space */
+	str	r4, [sp]     /* save r4's value */
+
+	/* move into fast relock bypass */
+	ldr	r8, pll_ctl_add
+	mov	r4, #0x2
+	str	r4, [r8]
+	ldr	r4, pll_stat
 block:
-        ldr     r8, [r4]	/* wait for bypass to take effect */
-        and     r8, r8, #0x3
-        cmp     r8, #0x1
-        bne     block
+	ldr	r8, [r4]	/* wait for bypass to take effect */
+	and	r8, r8, #0x3
+	cmp	r8, #0x1
+	bne	block
 
 	/* set new dpll dividers _after_ in bypass */
-	ldr     r4, pll_div_add
-	ldr     r8, pll_div_val
-        str     r8, [r4]
-    
-        /* now prepare GPMC (flash) for new dpll speed */
+	ldr	r4, pll_div_add
+	ldr	r8, pll_div_val
+	str	r8, [r4]
+
+	/* now prepare GPMC (flash) for new dpll speed */
 	/* flash needs to be stable when we jump back to it */
-        ldr     r4, cfg3_0_addr
-        ldr     r8, cfg3_0_val
-        str     r8, [r4]
-        ldr     r4, cfg4_0_addr
-        ldr     r8, cfg4_0_val
-        str     r8, [r4]
-        ldr     r4, cfg1_0_addr
-        ldr     r8, [r4]
-        orr     r8, r8, #0x3     /* up gpmc divider */
-        str     r8, [r4]
-
-	/* setup to 2x loop though code.  The first loop pre-loads the 
-         * icache, the 2nd commits the prcm config, and locks the dpll
-         */
-        mov     r4, #0x1000      /* spin spin spin */
-        mov     r8, #0x4         /* first pass condition & set registers */
-        cmp     r8, #0x4
+	ldr	r4, cfg3_0_addr
+	ldr	r8, cfg3_0_val
+	str	r8, [r4]
+	ldr	r4, cfg4_0_addr
+	ldr	r8, cfg4_0_val
+	str	r8, [r4]
+	ldr	r4, cfg1_0_addr
+	ldr	r8, [r4]
+	orr	r8, r8, #0x3	 /* up gpmc divider */
+	str	r8, [r4]
+
+	/* setup to 2x loop though code.  The first loop pre-loads the
+	 * icache, the 2nd commits the prcm config, and locks the dpll
+	 */
+	mov	r4, #0x1000	 /* spin spin spin */
+	mov	r8, #0x4	 /* first pass condition & set registers */
+	cmp	r8, #0x4
 2:
-        ldrne   r8, [r3]         /* DPLL lock check */
-        and     r8, r8, #0x7
-        cmp     r8, #0x2
-        beq     4f
+	ldrne	r8, [r3]	 /* DPLL lock check */
+	and	r8, r8, #0x7
+	cmp	r8, #0x2
+	beq	4f
 3:
-        subeq   r8, r8, #0x1
-        streq   r8, [r0]         /* commit dividers (2nd time) */
-        nop
+	subeq	r8, r8, #0x1
+	streq	r8, [r0]	 /* commit dividers (2nd time) */
+	nop
 lloop1:
-        sub     r4, r4, #0x1    /* Loop currently necessary else bad jumps */
-        nop
-        cmp     r4, #0x0
-        bne     lloop1
-        mov     r4, #0x40000
-        cmp     r8, #0x1
-        nop
-        streq   r2, [r1]        /* lock dpll (2nd time) */
-        nop
+	sub	r4, r4, #0x1	/* Loop currently necessary else bad jumps */
+	nop
+	cmp	r4, #0x0
+	bne	lloop1
+	mov	r4, #0x40000
+	cmp	r8, #0x1
+	nop
+	streq	r2, [r1]	/* lock dpll (2nd time) */
+	nop
 lloop2:
-        sub     r4, r4, #0x1    /* loop currently necessary else bad jumps */
-        nop
-        cmp     r4, #0x0
-        bne     lloop2
-        mov     r4, #0x40000
-        cmp     r8, #0x1
-        nop
-        ldreq   r8, [r3]         /* get lock condition for dpll */
-        cmp     r8, #0x4         /* first time though? */
-        bne     2b
-        moveq   r8, #0x2         /* set to dpll check condition. */
-        beq     3b               /* if condition not true branch */
-4:  
-        ldr     r4, [sp]
-        add     sp, sp, #0x4     /* return stack space */
-        mov     pc, lr           /* back to caller, locked */        
+	sub	r4, r4, #0x1	/* loop currently necessary else bad jumps */
+	nop
+	cmp	r4, #0x0
+	bne	lloop2
+	mov	r4, #0x40000
+	cmp	r8, #0x1
+	nop
+	ldreq	r8, [r3]	 /* get lock condition for dpll */
+	cmp	r8, #0x4	 /* first time though? */
+	bne	2b
+	moveq	r8, #0x2	 /* set to dpll check condition. */
+	beq	3b		 /* if condition not true branch */
+4:
+	ldr	r4, [sp]
+	add	sp, sp, #0x4	 /* return stack space */
+	mov	pc, lr		 /* back to caller, locked */
 
 _go_to_speed: .word go_to_speed
 
 /* these constants need to be close for PIC code */
 cfg3_0_addr:
     .word  GPMC_CONFIG3_0
-cfg3_0_val: 
+cfg3_0_val:
     .word  H4_24XX_GPMC_CONFIG3_0
 cfg4_0_addr:
     .word  GPMC_CONFIG4_0
@@ -156,10 +156,10 @@ pll_ctl_add:
 pll_stat:
     .word CM_IDLEST_CKGEN
 pll_div_add:
-    .word CM_CLKSEL1_PLL 
+    .word CM_CLKSEL1_PLL
 pll_div_val:
     .word DPLL_VAL	/* DPLL setting (300MHz default) */
-#endif            
+#endif
 
 .globl platformsetup
 platformsetup:
@@ -175,23 +175,23 @@ platformsetup:
 	ldr	r0,	REG_SDRC_SHARING
 	ldr	r1,	VAL_SDRC_SHARING
 	str	r1,	[r0]
-       	ldr	r0,	REG_SDRC_RFR_CTRL_0
+	ldr	r0,	REG_SDRC_RFR_CTRL_0
 	ldr	r1,	VAL_SDRC_RFR_CTRL_0
 	str	r1,	[r0]
 
        /* little delay after init */
-       mov r2, #0x1800                        
-1:       
-        subs r2, r2, #0x1
-        bne 1b
+       mov r2, #0x1800
+1:
+	subs r2, r2, #0x1
+	bne 1b
 #endif
 #ifdef CONFIG_PARTIAL_SRAM
 	ldr	sp,	SRAM_STACK
-        str     ip,	[sp]    /* stash old link register */
+	str	ip,	[sp]	/* stash old link register */
 	mov	ip,	lr	/* save link reg across call */
-        mov     r0,     r3      /* pass skip info to s_init */
-        bl      s_init          /* go setup pll,mux,memory */
-        ldr     ip,	[sp]    /* restore save ip */
+	mov	r0,	r3	/* pass skip info to s_init */
+	bl	s_init		/* go setup pll,mux,memory */
+	ldr	ip,	[sp]	/* restore save ip */
 	mov	lr,	ip	/* restore link reg */
 #endif
 	/* map interrupt controller */
@@ -219,7 +219,7 @@ REG_SDRC_MCFG_0:
 REG_SDRC_MR_0:
 	.word SDRC_MR_0
 REG_SDRC_RFR_CTRL_0:
-        .word SDRC_RFR_CTRL
+	.word SDRC_RFR_CTRL
 VAL_SDRC_SHARING:
 	.word VAL_H4_SDRC_SHARING
 VAL_SDRC_MCFG_0:
@@ -227,11 +227,5 @@ VAL_SDRC_MCFG_0:
 VAL_SDRC_MR_0:
 	.word VAL_H4_SDRC_MR_0
 VAL_SDRC_RFR_CTRL_0:
-        .word VAL_H4_SDRC_RFR_CTRL_0
+	.word VAL_H4_SDRC_RFR_CTRL_0
 #endif
-
-
-
-
-
-
diff --git a/board/omap2420h4/u-boot.lds b/board/omap2420h4/u-boot.lds
index 724c1dd48a2..e9ff741ced5 100644
--- a/board/omap2420h4/u-boot.lds
+++ b/board/omap2420h4/u-boot.lds
@@ -1,6 +1,6 @@
 /*
- * January 2004 - Changed to support H4 device 
- * Copyright (c) 2004 Texas Instruments 
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004 Texas Instruments
  *
  * (C) Copyright 2002
  * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
@@ -15,7 +15,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -32,7 +32,7 @@ SECTIONS
 	. = 0x00000000;
 
 	. = ALIGN(4);
-	.text      :
+	.text	   :
 	{
 	  cpu/arm1136/start.o	(.text)
 	  *(.text)