summaryrefslogtreecommitdiff
path: root/board/palmtreo680
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2013-10-04 17:43:26 +0200
committerTom Rini <trini@ti.com>2013-10-14 16:06:54 -0400
commit16641d52fc70f67aa083c5ebffc526ee8e46bf35 (patch)
treec154702fb8190f9c232934482369a3bdf5966d02 /board/palmtreo680
parentd4c8aa9cb47b9db11c45a9d89d51c75e3cc887a7 (diff)
Coding Style cleanup: drop some excessive empty lines
Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'board/palmtreo680')
-rw-r--r--board/palmtreo680/README17
1 files changed, 0 insertions, 17 deletions
diff --git a/board/palmtreo680/README b/board/palmtreo680/README
index 46828eb84f..c8799c6ab1 100644
--- a/board/palmtreo680/README
+++ b/board/palmtreo680/README
@@ -30,7 +30,6 @@ go wrong, but please tell me what happened exactly. For that matter, I'd love
to hear from you if you succeed.
-
Details on the SPL
==================
@@ -51,7 +50,6 @@ IPL has already loaded to its correct SDRAM address, and then loads the
remainder of u-boot and jumps to it.
-
The docg4's "reliable mode"
===========================
@@ -79,7 +77,6 @@ module parameter), but not reading. However, the u-boot docg4_spl driver does
read in reliable mode, in the same fashion as the IPL.
-
Details on the IPL and its data format
======================================
@@ -105,7 +102,6 @@ For the sake of simplicity and uniformity, the u-boot SPL mimics the operation
of the IPL, and expects the image to be stored in the same format.
-
Instructions on Programming u-boot to flash
===========================================
@@ -117,7 +113,6 @@ remainder of this document describes in detail how to program u-boot to the
flash using Linux running on the Treo.
-
Hardware Prerequisites
======================
@@ -136,7 +131,6 @@ A Linux desktop PC.
to flash, you'll really want to use a Linux PC.
-
Treo-side Software Prerequisites
================================
@@ -152,7 +146,6 @@ Linux bootloader for PalmOS:
parameters passed to the kernel.
-
Linux kernel:
The kernel on the Treo 680 is still a little rough around the edges, and the
@@ -200,7 +193,6 @@ Linux kernel:
and /dev/mtd2 for these partitions, respectively. Ensure that your root file
system at least has /dev/mtd1 if you are not running udev or mdev.
-
Userspace Utilities:
In addition to everything necessary to provide a useful userspace environment
@@ -221,19 +213,16 @@ Userspace Utilities:
from the mtd-utils package.
-
Desktop PC-side Software Prerequisites
======================================
Terminal emulator application:
minicom, kermit, etc.
-
Linux kernel:
Compiled with CONFIG_USB_SERIAL enabled. Build this as a module.
-
Recommended (Not directly related to u-boot)
============================================
@@ -275,7 +264,6 @@ configure the usb0 interface on the desktop.) Use the nfs 'nolock' option when
mounting to avoid the need to run a portmapper like rpcbind.
-
Preliminaries
=============
@@ -397,7 +385,6 @@ forget to copy the file to permanent storage, such as an mmc card.
If all of the above went well, you can now program u-boot.
-
Programming u-boot
==================
@@ -438,7 +425,6 @@ four blocks in /dev/mtd1; i.e., at offsets 0x00000, 0x40000, 0x80000, 0xc0000.
Shutdown linux, remove and re-insert the battery, hold your breath...
-
Enjoying u-boot
===============
@@ -478,7 +464,6 @@ support for reliable mode in u-boot's docg4 flash driver. This should be
corrected soon.
-
Customizing
===========
@@ -511,7 +496,6 @@ in flash did not seem worth the cost of a 256k flash block. But adding this
should be straightforward.
-
Restoring PalmOS
================
@@ -568,7 +552,6 @@ modprobe docg4 ignore_badblocks=1 || exit 1
dd if=$1 bs=1 skip=$file_ofs count=540672 | nandwrite -o -n -s 0x80000 $2 - || exit 1
modprobe -r docg4
-
TODO
====