Update ALPR code (NAND support working now)

Patch by Stefan Roese, 07 Oct 2006

6 files changed, 185 insertions, 213 deletions

diff --git a/board/prodrive/alpr/Makefile b/board/prodrive/alpr/Makefile
index 993ad1995d4..1024a41a075 100644
--- a/board/prodrive/alpr/Makefile
+++ b/board/prodrive/alpr/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o fpga.o nand.o
+COBJS	= $(BOARD).o flash.o fpga.o nand.o
 SOBJS	= init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c
index 4f250c4f2f7..e8435bf63cb 100644
--- a/board/prodrive/alpr/alpr.c
+++ b/board/prodrive/alpr/alpr.c
@@ -38,11 +38,19 @@ int board_early_init_f (void)
 	/*-------------------------------------------------------------------------+
 	  | Initialize EBC CONFIG
 	  +-------------------------------------------------------------------------*/
+#if 0
 	mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
 	      EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK |
 	      EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS |
 	      EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT |
 	      EBC_CFG_PME_DISABLE | EBC_CFG_PR_32);
+#else
+	mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
+	      EBC_CFG_PTD_DISABLE | EBC_CFG_RTC_64PERCLK |
+	      EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS |
+	      EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT |
+	      EBC_CFG_PME_DISABLE | EBC_CFG_PR_32);
+#endif
 
 	/*--------------------------------------------------------------------
 	 * Setup the interrupt controller polarities, triggers, etc.
@@ -230,19 +238,6 @@ int is_pci_host(struct pci_controller *hose)
 #if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
 void pci_master_init(struct pci_controller *hose)
 {
-	unsigned short temp_short;
-#if 0
-	/*--------------------------------------------------------------------------+
-	  | Write the PowerPC440 PCI Configuration regs.
-	  |   Enable PowerPC440 to be a master on the PCI bus (PMM).
-	  |   Enable PowerPC440 to act as a PCI memory target (PTM).
-	  +--------------------------------------------------------------------------*/
-	pci_read_config_word(0, PCI_COMMAND, &temp_short);
-	pci_write_config_word(0, PCI_COMMAND,
-			      temp_short | PCI_COMMAND_MASTER |
-			      PCI_COMMAND_MEMORY);
-#endif
-#if 1
 	/*--------------------------------------------------------------------------+
 	  | PowerPC440 PCI Master configuration.
 	  | Map PLB/processor addresses to PCI memory space.
@@ -265,8 +260,6 @@ void pci_master_init(struct pci_controller *hose)
 	out32r(PCIX0_POM1PCIAL, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
 	out32r(PCIX0_POM1PCIAH, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_POM1SA, ~(0x10000000 - 1) | 1);	/* 256MB + enable region */
-
-#endif
 }
 #endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
 
@@ -281,3 +274,11 @@ int post_hotkeys_pressed(void)
 	return (ctrlc());
 }
 #endif
+
+void board_reset(void)
+{
+	/*
+	 * Initiate chip reset in debug control register DBCR
+	 */
+	mtspr(dbcr0, 0x20000000);
+}
diff --git a/board/prodrive/alpr/flash.c b/board/prodrive/alpr/flash.c
new file mode 100644
index 00000000000..8fa008430ad
--- /dev/null
+++ b/board/prodrive/alpr/flash.c
@@ -0,0 +1,70 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*
+ * Prototypes
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+
+unsigned long flash_init(void)
+{
+	unsigned long size;
+	int i;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; i++)
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+
+	size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN)
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size, size<<20);
+
+	/* Monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET, -CFG_MONITOR_LEN, 0xffffffff,
+		      &flash_info[0]);
+
+	/* Environment protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_ENV_ADDR,
+		      CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+		      &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+
+	/* Redundant environment protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_ENV_ADDR_REDUND,
+		      CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+		      &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+
+	flash_info[0].size = size;
+
+	return size;
+}
diff --git a/board/prodrive/alpr/init.S b/board/prodrive/alpr/init.S
index 59d3ab634e7..1baa609c058 100644
--- a/board/prodrive/alpr/init.S
+++ b/board/prodrive/alpr/init.S
@@ -1,24 +1,25 @@
 /*
-*  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
 
 #include <ppc_asm.tmpl>
 #include <config.h>
@@ -27,15 +28,15 @@
 #define TLB_VALID   0x00000200
 
 /* Supported page sizes */
-
 #define SZ_1K	    0x00000000
 #define SZ_4K	    0x00000010
 #define SZ_16K	    0x00000020
 #define SZ_64K	    0x00000030
-#define SZ_256K    0x00000040
+#define SZ_256K	    0x00000040
 #define SZ_1M	    0x00000050
+#define SZ_8M       0x00000060
 #define SZ_16M	    0x00000070
-#define SZ_256M    0x00000090
+#define SZ_256M	    0x00000090
 
 /* Storage attributes */
 #define SA_W	    0x00000800	    /* Write-through */
@@ -81,29 +82,23 @@
  *
  *************************************************************************/
 
-    .section .bootpg,"ax"
-    .globl tlbtab
+	.section .bootpg,"ax"
+	.globl tlbtab
 
 tlbtab:
-    tlbtab_start
-    tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
-    tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
-    tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
-    tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
-    tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-    tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-    tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
- 
-   /* PCI */
-    tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 3, AC_R|AC_W|SA_G|SA_I )
-#if 1
-    tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 3, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 3, AC_R|AC_W|SA_G|SA_I )
-#endif
-#if 0
-    tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 3, AC_R|AC_W|SA_G|SA_I )
-#endif
-
-    /* NAND */
-    tlbentry( CFG_NAND_BASE, SZ_16M, CFG_NAND_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
-    tlbtab_end
+	tlbtab_start
+	tlbentry( 0xff000000, SZ_16M, 0xff000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
+	tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
+	tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
+
+	/* PCI */
+	tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 3, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 3, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 3, AC_R|AC_W|SA_G|SA_I )
+
+	/* NAND */
+	tlbentry( CFG_NAND_BASE, SZ_4K, CFG_NAND_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbtab_end
diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c
index bd9ba3560e9..20a80983073 100644
--- a/board/prodrive/alpr/nand.c
+++ b/board/prodrive/alpr/nand.c
@@ -2,6 +2,9 @@
  * (C) Copyright 2006
  * Heiko Schocher, DENX Software Engineering, hs@denx.de
  *
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -22,69 +25,27 @@
  */
 
 #include <common.h>
-#include <asm/io.h>
 
 #if (CONFIG_COMMANDS & CFG_CMD_NAND)
 
+#include <asm/processor.h>
 #include <nand.h>
 
-#if 0
-#define HS_printf(fmt,arg...) \
-        printf("HS %s %s: " fmt,__FILE__, __FUNCTION__, ##arg)
-#else
-#define HS_printf(fmt,arg...) \
-        do { } while (0)
-#endif
-
-#if 0
-#define	CPLD_REG	uchar
-#else
-#define	CPLD_REG	u16
-#endif
-
 struct alpr_ndfc_regs {
-	CPLD_REG cmd[4];
-	CPLD_REG addr_wait;
-	CPLD_REG term;
-	CPLD_REG dummy;
-	uchar    dum2[2];
-	CPLD_REG data;
+	u16 cmd[4];
+	u16 addr_wait;
+	u16 term;
+	u16 dummy;
+	u16 dummy2;
+	u16 data;
 };
 
 static u8 hwctl;
-static struct alpr_ndfc_regs *alpr_ndfc;
-static int	alpr_chip = 0;
+static struct alpr_ndfc_regs *alpr_ndfc = NULL;
 
-#if 1
-static int pdnb3_nand_dev_ready(struct mtd_info *mtd);
+#define readb(addr)	(u8)(*(volatile u16 *)(addr))
+#define writeb(d,addr)	*(volatile u16 *)(addr) = ((u16)(d))
 
-#if 1
-static u_char alpr_read (void *padr) {
-	return (u_char )*((u16 *)(padr));
-}
-#else
-static u_char alpr_read (void *padr) {
-	u16	hilf;
-	u_char ret = 0;
-	hilf = *((u16 *)(padr));
-	ret = hilf;
-printf("%p hilf: %x ret: %x\n", padr, hilf, ret);
-	return ret;
-}
-#endif
-
-static void alpr_write (u_char byte, void *padr) {
-HS_printf("%p  Byte: %x\n", padr, byte);
-	*(volatile u16 *)padr = (u16)(byte);
-}
-
-#elif 0
-#define alpr_read(a) (*(volatile u16 *) (a))
-#define alpr_write(a, b) ((*(volatile u16 *) (a)) = (b))
-#else
-#define alpr_read(a) readw(a)
-#define alpr_write(a, b) writew(a, b)
-#endif
 /*
  * The ALPR has a NAND Flash Controller (NDFC) that handles all accesses to
  * the NAND devices.  The NDFC has command, address and data registers that
@@ -93,11 +54,10 @@ HS_printf("%p  Byte: %x\n", padr, byte);
  * We can then use this information in the read and write functions to
  * determine which NDFC register to access.
  *
- * There are 2 NAND devices on the board, a Hynix HY27US08561A (32 MByte).
+ * There are 2 NAND devices on the board, a Hynix HY27US08561A (1 GByte).
  */
-static void pdnb3_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+static void alpr_nand_hwcontrol(struct mtd_info *mtd, int cmd)
 {
-HS_printf("cmd: %x\n", cmd);
 	switch (cmd) {
 	case NAND_CTL_SETCLE:
 		hwctl |= 0x1;
@@ -114,136 +74,84 @@ HS_printf("cmd: %x\n", cmd);
 	case NAND_CTL_SETNCE:
 		break;
 	case NAND_CTL_CLRNCE:
-		alpr_write(0x00, &(alpr_ndfc->term));
+		writeb(0x00, &(alpr_ndfc->term));
 		break;
 	}
 }
 
-static void pdnb3_nand_write_byte(struct mtd_info *mtd, u_char byte)
+static void alpr_nand_write_byte(struct mtd_info *mtd, u_char byte)
 {
-HS_printf("hwctl: %x %x %x %x\n", hwctl, byte, &(alpr_ndfc->cmd[alpr_chip]), &(alpr_ndfc->addr_wait));
+	struct nand_chip *nand = mtd->priv;
+
 	if (hwctl & 0x1)
-		alpr_write(byte, &(alpr_ndfc->cmd[alpr_chip]));
+		/*
+		 * IO_ADDR_W used as CMD[i] reg to support multiple NAND
+		 * chips.
+		 */
+		writeb(byte, nand->IO_ADDR_W);
 	else if (hwctl & 0x2) {
-		alpr_write(byte, &(alpr_ndfc->addr_wait));
+		writeb(byte, &(alpr_ndfc->addr_wait));
 	} else
-		alpr_write(byte, &(alpr_ndfc->data));
+		writeb(byte, &(alpr_ndfc->data));
 }
 
-static u_char pdnb3_nand_read_byte(struct mtd_info *mtd)
+static u_char alpr_nand_read_byte(struct mtd_info *mtd)
 {
-	return alpr_read(&(alpr_ndfc->data));
+	return readb(&(alpr_ndfc->data));
 }
 
-static void pdnb3_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+static void alpr_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
 {
+	struct nand_chip *nand = mtd->priv;
 	int i;
 
-/*printf("%s chip:%d hwctl:%x size:%d\n", __FUNCTION__, alpr_chip, hwctl, len);*/
 	for (i = 0; i < len; i++) {
 		if (hwctl & 0x1)
-			alpr_write(buf[i], &(alpr_ndfc->cmd[alpr_chip]));
-		else if (hwctl & 0x2) {
-			alpr_write(buf[i], &(alpr_ndfc->addr_wait));
-		} else {
-			alpr_write(buf[i], &(alpr_ndfc->data));
-			/*printf("i: %d\n", i);*/
-		}	
+			 /*
+			  * IO_ADDR_W used as CMD[i] reg to support multiple NAND
+			  * chips.
+			  */
+			writeb(buf[i], nand->IO_ADDR_W);
+		else if (hwctl & 0x2)
+			writeb(buf[i], &(alpr_ndfc->addr_wait));
+		else
+			writeb(buf[i], &(alpr_ndfc->data));
 	}
 }
 
-static void pdnb3_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+static void alpr_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 {
 	int i;
 
 	for (i = 0; i < len; i++) {
-		buf[i] = alpr_read(&(alpr_ndfc->data));
+		buf[i] = readb(&(alpr_ndfc->data));
 	}
 }
 
-static int pdnb3_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+static int alpr_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
 {
 	int i;
 
 	for (i = 0; i < len; i++)
-		if (buf[i] != alpr_read(&(alpr_ndfc->data)))
+		if (buf[i] != readb(&(alpr_ndfc->data)))
 			return i;
 
 	return 0;
 }
 
-static int pdnb3_nand_dev_ready(struct mtd_info *mtd)
+static int alpr_nand_dev_ready(struct mtd_info *mtd)
 {
-#if 1
 	volatile u_char val;
 
-/*printf("%s aufruf\n", __FUNCTION__);*/
 	/*
 	 * Blocking read to wait for NAND to be ready
 	 */
-	val = alpr_read(&(alpr_ndfc->addr_wait));
+	val = readb(&(alpr_ndfc->addr_wait));
 
 	/*
 	 * Return always true
 	 */
 	return 1;
-#else
-	u8 hwctl_org = hwctl;
-	unsigned long	timeo;
-	u8	val;
-
-	hwctl = 0x01;
-	pdnb3_nand_write_byte (mtd, NAND_CMD_STATUS);
-	hwctl = hwctl_org;
-
-	reset_timer();
-	while (1) {
-		if (get_timer(0) > timeo) {
-			printf("Timeout!");
-			return 0;
-			}
-
-val = pdnb3_nand_read_byte(mtd);
-/*printf("%s val: %x\n", __FUNCTION__, val);*/
-			if (val & NAND_STATUS_READY)
-				break;
-	}
-	return 1;
-#endif
-
-}
-
-static void alpr_select_chip(struct mtd_info *mtd, int chip)
-{
-	alpr_chip = chip;
-}
-
-static int alpr_nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
-{
-	unsigned long	timeo;
-
-	if (state == FL_ERASING)
-		timeo = CFG_HZ * 400;
-	else
-		timeo = CFG_HZ * 20;
-
-	if ((state == FL_ERASING) && (this->options & NAND_IS_AND))
-		this->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1);
-	else
-		this->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
-
-	reset_timer();
-
-	while (1) {
-		if (get_timer(0) > timeo) {
-			printf("Timeout!");
-			return 0;
-			}
-
-			if (this->read_byte(mtd) & NAND_STATUS_READY)
-				break;
-	}
-	return this->read_byte(mtd);
 }
 
 void board_nand_init(struct nand_chip *nand)
@@ -252,20 +160,14 @@ void board_nand_init(struct nand_chip *nand)
 
 	nand->eccmode = NAND_ECC_SOFT;
 
-	/* Set address of NAND IO lines (Using Linear Data Access Region) */
-	nand->IO_ADDR_R = (void __iomem *) ((ulong) alpr_ndfc + 0x10);
-	nand->IO_ADDR_W = (void __iomem *) ((ulong) alpr_ndfc + 0x10);
 	/* Reference hardware control function */
-	nand->hwcontrol  = pdnb3_nand_hwcontrol;
+	nand->hwcontrol  = alpr_nand_hwcontrol;
 	/* Set command delay time */
-	nand->hwcontrol  = pdnb3_nand_hwcontrol;
-	nand->write_byte = pdnb3_nand_write_byte;
-	nand->read_byte  = pdnb3_nand_read_byte;
-	nand->write_buf  = pdnb3_nand_write_buf;
-	nand->read_buf   = pdnb3_nand_read_buf;
-	nand->verify_buf = pdnb3_nand_verify_buf;
-	nand->dev_ready  = pdnb3_nand_dev_ready;
-	nand->select_chip = alpr_select_chip;
-	nand->waitfunc 	 = alpr_nand_wait;
+	nand->write_byte = alpr_nand_write_byte;
+	nand->read_byte  = alpr_nand_read_byte;
+	nand->write_buf  = alpr_nand_write_buf;
+	nand->read_buf   = alpr_nand_read_buf;
+	nand->verify_buf = alpr_nand_verify_buf;
+	nand->dev_ready  = alpr_nand_dev_ready;
 }
 #endif
diff --git a/board/prodrive/common/flash.c b/board/prodrive/common/flash.c
index 8630cc16642..363631fd84f 100644
--- a/board/prodrive/common/flash.c
+++ b/board/prodrive/common/flash.c
@@ -48,6 +48,7 @@ void flash_print_info(flash_info_t *info)
 	case FLASH_MAN_AMD:	printf ("AMD ");		break;
 	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
 	case FLASH_MAN_SST:	printf ("SST ");		break;
+	case FLASH_MAN_STM:	printf ("ST ");			break;
 	case FLASH_MAN_EXCEL:	printf ("Excel Semiconductor "); break;
 	default:		printf ("Unknown Vendor ");	break;
 	}
@@ -156,6 +157,9 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info)
 	case (CFG_FLASH_WORD_SIZE)SST_MANUFACT:
 		info->flash_id = FLASH_MAN_SST;
 		break;
+	case (CFG_FLASH_WORD_SIZE)STM_MANUFACT:
+		info->flash_id = FLASH_MAN_STM;
+		break;
 	case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT:
 		info->flash_id = FLASH_MAN_EXCEL;
 		break;