* Patch by Andreas Oberritter, 09 Nov 2002:

  Change behaviour of NetLoop(): return -1 for errors, filesize
  otherwise; return code 0 is valid an means no file loaded - in this
  case the environment still gets updated!

* Patches by Jon Diekema, 9 Nov 2002:
  - improve ADC/DAC clocking on the SACSng board to align
    the failing edges of LRCLK and SCLK
  - sbc8260 configuration tweaks
  - add status LED support for 82xx systems
  - wire sspi/sspo commands into command handler; improved error
    handlering
  - add timestamp support and alternate memory test to the
    SACSng configuration

3 files changed, 367 insertions, 198 deletions

diff --git a/board/sacsng/clkinit.c b/board/sacsng/clkinit.c
index 1e851e14d88..634c1e05fb4 100644
--- a/board/sacsng/clkinit.c
+++ b/board/sacsng/clkinit.c
@@ -286,7 +286,6 @@ uint Daq_BRG_Rate(uint brg)
 }
 
 uint Daq_Get_SampleRate(void)
-
 {
      /*
       * Read the BRG's to return the actual sample rate.
@@ -294,68 +293,12 @@ uint Daq_Get_SampleRate(void)
      return (Daq_BRG_Rate(MCLK_BRG) / (MCLK_DIVISOR * SCLK_DIVISOR));
 }
 
-uint Daq_Set_SampleRate(uint rate, uint force)
-
-{
-    DECLARE_GLOBAL_DATA_PTR;
-    uint mclk_divisor; /* MCLK divisor */
-    uint rate_curr;    /* Current sample rate */
-
-    /*
-     * Limit the sample rate to some sensible values.
-     */
-    if (Daq64xSampling) {
-      if (rate > MAX_64x_SAMPLE_RATE) {
-	  rate = MAX_64x_SAMPLE_RATE;
-      }
-    }
-    else {
-      if (rate > MAX_128x_SAMPLE_RATE) {
-	  rate = MAX_128x_SAMPLE_RATE;
-      }
-    }
-    if (rate < MIN_SAMPLE_RATE) {
-        rate = MIN_SAMPLE_RATE;
-    }
-
-    /* Check to see if we are really changing rates */
-    rate_curr = Daq_Get_SampleRate();
-    if ((rate != rate_curr) || force) {
-        /*
-	 * Dynamically adjust MCLK based on the new sample rate.
-	 */
-
-        /* Compute the divisors */
-        mclk_divisor = BRG_INT_CLK / (rate * MCLK_DIVISOR * SCLK_DIVISOR);
-
-	/* Setup MCLK */
-	Daq_BRG_Set_Count(MCLK_BRG, mclk_divisor);
-
-	/* Setup SCLK */
-#       ifdef RUN_SCLK_ON_BRG_INT
-	   Daq_BRG_Set_Count(SCLK_BRG, mclk_divisor * MCLK_DIVISOR);
-#       else
-	   Daq_BRG_Set_Count(SCLK_BRG, MCLK_DIVISOR);
-#       endif
-
-#       ifdef RUN_LRCLK_ON_BRG_INT
-	    Daq_BRG_Set_Count(LRCLK_BRG,
-			      mclk_divisor * MCLK_DIVISOR * SCLK_DIVISOR);
-#       else
-	    Daq_BRG_Set_Count(LRCLK_BRG, SCLK_DIVISOR);
-#       endif
-
-	/* Read the BRG's to return the actual sample rate. */
-	rate_curr = Daq_Get_SampleRate();
-    }
-
-    return (rate_curr);
-}
-
 void Daq_Init_Clocks(int sample_rate, int sample_64x)
-
 {
+    DECLARE_GLOBAL_DATA_PTR;
     volatile ioport_t *iopa = ioport_addr((immap_t *)CFG_IMMR, 0 /* port A */);
+    uint mclk_divisor; /* MCLK divisor */
+    int  flag;         /* Interrupt state */ 
 
     /* Save off the clocking data */
     Daq64xSampling = sample_64x;
@@ -363,18 +306,11 @@ void Daq_Init_Clocks(int sample_rate, int sample_64x)
     /*
      * Limit the sample rate to some sensible values.
      */
-    if (Daq64xSampling) {
-      if (sample_rate > MAX_64x_SAMPLE_RATE) {
-	  sample_rate = MAX_64x_SAMPLE_RATE;
-      }
-    }
-    else {
-      if (sample_rate > MAX_128x_SAMPLE_RATE) {
-	  sample_rate = MAX_128x_SAMPLE_RATE;
-      }
+    if (sample_rate > MAX_64x_SAMPLE_RATE) {
+        sample_rate = MAX_64x_SAMPLE_RATE;	
     }
     if (sample_rate < MIN_SAMPLE_RATE) {
-        sample_rate = MIN_SAMPLE_RATE;
+        sample_rate = MIN_SAMPLE_RATE;	
     }
 
     /*
@@ -398,8 +334,41 @@ void Daq_Init_Clocks(int sample_rate, int sample_64x)
         Daq_BRG_Set_ExtClk(LRCLK_BRG, CPM_BRG_EXTC_CLK5);
 #   endif
 
-    /* Setup the BRG rates */
-    Daq_Set_SampleRate(sample_rate, TRUE);
+    /*
+     * Dynamically adjust MCLK based on the new sample rate.
+     */
+
+    /* Compute the divisors */
+    mclk_divisor = BRG_INT_CLK / (sample_rate * MCLK_DIVISOR * SCLK_DIVISOR);
+
+    /*
+     * Disable interrupt and save the current state
+     */
+    flag = disable_interrupts();
+
+    /* Setup MCLK */
+    Daq_BRG_Set_Count(MCLK_BRG, mclk_divisor);
+
+    /* Setup SCLK */
+#   ifdef RUN_SCLK_ON_BRG_INT
+	Daq_BRG_Set_Count(SCLK_BRG, mclk_divisor * MCLK_DIVISOR);
+#   else
+	Daq_BRG_Set_Count(SCLK_BRG, MCLK_DIVISOR);
+#   endif
+
+#   ifdef RUN_LRCLK_ON_BRG_INT
+	Daq_BRG_Set_Count(LRCLK_BRG, 
+			  mclk_divisor * MCLK_DIVISOR * SCLK_DIVISOR);
+#   else
+	Daq_BRG_Set_Count(LRCLK_BRG, SCLK_DIVISOR);
+#   endif
+
+    /*
+     * Restore the Interrupt state
+     */
+     if (flag) {
+         enable_interrupts();
+     }
 
     /* Enable the clock drivers */
     iopa->pdat &= ~SLRCLK_EN_MASK;
@@ -410,116 +379,276 @@ void Daq_Stop_Clocks(void)
 {
 #ifdef TIGHTEN_UP_BRG_TIMING
     volatile immap_t *immr = (immap_t *)CFG_IMMR;
+    register uint mclk_brg;       /* MCLK  BRG value */
+    register uint sclk_brg;       /* SCLK  BRG value */
+    register uint lrclk_brg;      /* LRCLK BRG value */
+    unsigned long flag;           /* Interrupt flags */
 #endif
 
 #   ifdef TIGHTEN_UP_BRG_TIMING
-        /*
-         * Reset MCLK BRG
+        /* 
+         * Obtain MCLK BRG reset/disabled value
          */
 #       if (MCLK_BRG == 0)
-            immr->im_brgc1 |=  CPM_BRG_RST;
-            immr->im_brgc1 &= ~CPM_BRG_RST;
+            mclk_brg = (*IM_BRGC1 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (MCLK_BRG == 1)
-            immr->im_brgc2 |=  CPM_BRG_RST;
-            immr->im_brgc2 &= ~CPM_BRG_RST;
+            mclk_brg = (*IM_BRGC2 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (MCLK_BRG == 2)
-            immr->im_brgc3 |=  CPM_BRG_RST;
-            immr->im_brgc3 &= ~CPM_BRG_RST;
+            mclk_brg = (*IM_BRGC3 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (MCLK_BRG == 3)
-            immr->im_brgc4 |=  CPM_BRG_RST;
-            immr->im_brgc4 &= ~CPM_BRG_RST;
+            mclk_brg = (*IM_BRGC4 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (MCLK_BRG == 4)
-            immr->im_brgc5 |=  CPM_BRG_RST;
-            immr->im_brgc5 &= ~CPM_BRG_RST;
+            mclk_brg = (*IM_BRGC5 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (MCLK_BRG == 5)
-            immr->im_brgc6 |=  CPM_BRG_RST;
-            immr->im_brgc6 &= ~CPM_BRG_RST;
+            mclk_brg = (*IM_BRGC6 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (MCLK_BRG == 6)
-            immr->im_brgc7 |=  CPM_BRG_RST;
-            immr->im_brgc7 &= ~CPM_BRG_RST;
+            mclk_brg = (*IM_BRGC7 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (MCLK_BRG == 7)
-            immr->im_brgc8 |=  CPM_BRG_RST;
-            immr->im_brgc8 &= ~CPM_BRG_RST;
+            mclk_brg = (*IM_BRGC8 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 
-        /*
-         * Reset SCLK BRG
+        /* 
+         * Obtain SCLK BRG reset/disabled value
          */
 #       if (SCLK_BRG == 0)
-            immr->im_brgc1 |=  CPM_BRG_RST;
-            immr->im_brgc1 &= ~CPM_BRG_RST;
+            sclk_brg = (*IM_BRGC1 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (SCLK_BRG == 1)
-            immr->im_brgc2 |=  CPM_BRG_RST;
-            immr->im_brgc2 &= ~CPM_BRG_RST;
+            sclk_brg = (*IM_BRGC2 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (SCLK_BRG == 2)
-            immr->im_brgc3 |=  CPM_BRG_RST;
-            immr->im_brgc3 &= ~CPM_BRG_RST;
+            sclk_brg = (*IM_BRGC3 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (SCLK_BRG == 3)
-            immr->im_brgc4 |=  CPM_BRG_RST;
-            immr->im_brgc4 &= ~CPM_BRG_RST;
+            sclk_brg = (*IM_BRGC4 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (SCLK_BRG == 4)
-            immr->im_brgc5 |=  CPM_BRG_RST;
-            immr->im_brgc5 &= ~CPM_BRG_RST;
+            sclk_brg = (*IM_BRGC5 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (SCLK_BRG == 5)
-            immr->im_brgc6 |=  CPM_BRG_RST;
-            immr->im_brgc6 &= ~CPM_BRG_RST;
+            sclk_brg = (*IM_BRGC6 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (SCLK_BRG == 6)
-            immr->im_brgc7 |=  CPM_BRG_RST;
-            immr->im_brgc7 &= ~CPM_BRG_RST;
+            sclk_brg = (*IM_BRGC7 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (SCLK_BRG == 7)
-            immr->im_brgc8 |=  CPM_BRG_RST;
-            immr->im_brgc8 &= ~CPM_BRG_RST;
+            sclk_brg = (*IM_BRGC8 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 
-        /*
-         * Reset LRCLK BRG
+        /* 
+         * Obtain LRCLK BRG reset/disabled value
          */
 #       if (LRCLK_BRG == 0)
-            immr->im_brgc1 |=  CPM_BRG_RST;
-            immr->im_brgc1 &= ~CPM_BRG_RST;
+            lrclk_brg = (*IM_BRGC1 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (LRCLK_BRG == 1)
-            immr->im_brgc2 |=  CPM_BRG_RST;
-            immr->im_brgc2 &= ~CPM_BRG_RST;
+            lrclk_brg = (*IM_BRGC2 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (LRCLK_BRG == 2)
-            immr->im_brgc3 |=  CPM_BRG_RST;
-            immr->im_brgc3 &= ~CPM_BRG_RST;
+            lrclk_brg = (*IM_BRGC3 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (LRCLK_BRG == 3)
-            immr->im_brgc4 |=  CPM_BRG_RST;
-            immr->im_brgc4 &= ~CPM_BRG_RST;
+            lrclk_brg = (*IM_BRGC4 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (LRCLK_BRG == 4)
-            immr->im_brgc5 |=  CPM_BRG_RST;
-            immr->im_brgc5 &= ~CPM_BRG_RST;
+            lrclk_brg = (*IM_BRGC5 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (LRCLK_BRG == 5)
-            immr->im_brgc6 |=  CPM_BRG_RST;
-            immr->im_brgc6 &= ~CPM_BRG_RST;
+            lrclk_brg = (*IM_BRGC6 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (LRCLK_BRG == 6)
-            immr->im_brgc7 |=  CPM_BRG_RST;
-            immr->im_brgc7 &= ~CPM_BRG_RST;
+            lrclk_brg = (*IM_BRGC7 | CPM_BRG_RST) & ~CPM_BRG_EN;
 #       endif
 #       if (LRCLK_BRG == 7)
-            immr->im_brgc8 |=  CPM_BRG_RST;
-            immr->im_brgc8 &= ~CPM_BRG_RST;
+            lrclk_brg = (*IM_BRGC8 | CPM_BRG_RST) & ~CPM_BRG_EN;
+#       endif
+	
+	/*
+	 * Disable interrupt and save the current state
+	 */
+	flag = disable_interrupts();
+
+        /* 
+         * Set reset on MCLK BRG
+         */
+#       if (MCLK_BRG == 0)
+            *IM_BRGC1 = mclk_brg;
+#       endif
+#       if (MCLK_BRG == 1)
+            *IM_BRGC2 = mclk_brg;
+#       endif
+#       if (MCLK_BRG == 2)
+            *IM_BRGC3 = mclk_brg;
+#       endif
+#       if (MCLK_BRG == 3)
+            *IM_BRGC4 = mclk_brg;
+#       endif
+#       if (MCLK_BRG == 4)
+            *IM_BRGC5 = mclk_brg;
+#       endif
+#       if (MCLK_BRG == 5)
+            *IM_BRGC6 = mclk_brg;
+#       endif
+#       if (MCLK_BRG == 6)
+            *IM_BRGC7 = mclk_brg;
+#       endif
+#       if (MCLK_BRG == 7)
+            *IM_BRGC8 = mclk_brg;
+#       endif
+
+        /* 
+         * Set reset on SCLK BRG
+         */
+#       if (SCLK_BRG == 0)
+            *IM_BRGC1 = sclk_brg;
+#       endif
+#       if (SCLK_BRG == 1)
+            *IM_BRGC2 = sclk_brg;
+#       endif
+#       if (SCLK_BRG == 2)
+            *IM_BRGC3 = sclk_brg;
+#       endif
+#       if (SCLK_BRG == 3)
+            *IM_BRGC4 = sclk_brg;
+#       endif
+#       if (SCLK_BRG == 4)
+            *IM_BRGC5 = sclk_brg;
+#       endif
+#       if (SCLK_BRG == 5)
+            *IM_BRGC6 = sclk_brg;
 #       endif
+#       if (SCLK_BRG == 6)
+            *IM_BRGC7 = sclk_brg;
+#       endif
+#       if (SCLK_BRG == 7)
+            *IM_BRGC8 = sclk_brg;
+#       endif
+
+        /* 
+         * Set reset on LRCLK BRG
+         */
+#       if (LRCLK_BRG == 0)
+            *IM_BRGC1 = lrclk_brg;
+#       endif
+#       if (LRCLK_BRG == 1)
+            *IM_BRGC2 = lrclk_brg;
+#       endif
+#       if (LRCLK_BRG == 2)
+            *IM_BRGC3 = lrclk_brg;
+#       endif
+#       if (LRCLK_BRG == 3)
+            *IM_BRGC4 = lrclk_brg;
+#       endif
+#       if (LRCLK_BRG == 4)
+            *IM_BRGC5 = lrclk_brg;
+#       endif
+#       if (LRCLK_BRG == 5)
+            *IM_BRGC6 = lrclk_brg;
+#       endif
+#       if (LRCLK_BRG == 6)
+            *IM_BRGC7 = lrclk_brg;
+#       endif
+#       if (LRCLK_BRG == 7)
+            *IM_BRGC8 = lrclk_brg;
+#       endif
+	
+        /* 
+         * Clear reset on MCLK BRG
+         */
+#       if (MCLK_BRG == 0)
+            *IM_BRGC1 = mclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (MCLK_BRG == 1)
+            *IM_BRGC2 = mclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (MCLK_BRG == 2)
+            *IM_BRGC3 = mclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (MCLK_BRG == 3)
+            *IM_BRGC4 = mclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (MCLK_BRG == 4)
+            *IM_BRGC5 = mclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (MCLK_BRG == 5)
+            *IM_BRGC6 = mclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (MCLK_BRG == 6)
+            *IM_BRGC7 = mclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (MCLK_BRG == 7)
+            *IM_BRGC8 = mclk_brg & ~CPM_BRG_RST;
+#       endif
+
+        /* 
+         * Clear reset on SCLK BRG
+         */
+#       if (SCLK_BRG == 0)
+            *IM_BRGC1 = sclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (SCLK_BRG == 1)
+            *IM_BRGC2 = sclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (SCLK_BRG == 2)
+            *IM_BRGC3 = sclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (SCLK_BRG == 3)
+            *IM_BRGC4 = sclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (SCLK_BRG == 4)
+            *IM_BRGC5 = sclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (SCLK_BRG == 5)
+            *IM_BRGC6 = sclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (SCLK_BRG == 6)
+            *IM_BRGC7 = sclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (SCLK_BRG == 7)
+            *IM_BRGC8 = sclk_brg & ~CPM_BRG_RST;
+#       endif
+
+        /* 
+         * Clear reset on LRCLK BRG
+         */
+#       if (LRCLK_BRG == 0)
+            *IM_BRGC1 = lrclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (LRCLK_BRG == 1)
+            *IM_BRGC2 = lrclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (LRCLK_BRG == 2)
+            *IM_BRGC3 = lrclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (LRCLK_BRG == 3)
+            *IM_BRGC4 = lrclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (LRCLK_BRG == 4)
+            *IM_BRGC5 = lrclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (LRCLK_BRG == 5)
+            *IM_BRGC6 = lrclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (LRCLK_BRG == 6)
+            *IM_BRGC7 = lrclk_brg & ~CPM_BRG_RST;
+#       endif
+#       if (LRCLK_BRG == 7)
+            *IM_BRGC8 = lrclk_brg & ~CPM_BRG_RST;
+#       endif
+	
+	/*
+	 * Restore the Interrupt state
+	 */
+	if (flag) {
+            enable_interrupts();
+	}
 #   else
         /*
          * Reset the clocks
@@ -536,99 +665,99 @@ void Daq_Start_Clocks(int sample_rate)
 #ifdef TIGHTEN_UP_BRG_TIMING
     volatile immap_t *immr = (immap_t *)CFG_IMMR;
 
-    uint          mclk_brg;       /* MCLK  BRG value */
-    uint          sclk_brg;       /* SCLK  BRG value */
+    register uint mclk_brg;       /* MCLK  BRG value */
+    register uint sclk_brg;       /* SCLK  BRG value */
+    register uint temp_lrclk_brg; /* Temporary LRCLK BRG value */
+    register uint real_lrclk_brg; /* Permanent LRCLK BRG value */
     uint          lrclk_brg;      /* LRCLK BRG value */
-    uint          temp_lrclk_brg; /* Temporary LRCLK BRG value */
-    uint	  real_lrclk_brg; /* Permanent LRCLK BRG value */
     unsigned long flags;          /* Interrupt flags */
     uint          sclk_cnt;       /* SCLK count */
     uint          delay_cnt;      /* Delay count */
 #endif
 
 #   ifdef TIGHTEN_UP_BRG_TIMING
-        /*
+        /* 
          * Obtain the enabled MCLK BRG value
          */
 #       if (MCLK_BRG == 0)
-            mclk_brg = (immr->im_brgc1 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            mclk_brg = (*IM_BRGC1 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (MCLK_BRG == 1)
-            mclk_brg = (immr->im_brgc2 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            mclk_brg = (*IM_BRGC2 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (MCLK_BRG == 2)
-            mclk_brg = (immr->im_brgc3 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            mclk_brg = (*IM_BRGC3 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (MCLK_BRG == 3)
-            mclk_brg = (immr->im_brgc4 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            mclk_brg = (*IM_BRGC4 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (MCLK_BRG == 4)
-            mclk_brg = (immr->im_brgc5 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            mclk_brg = (*IM_BRGC5 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (MCLK_BRG == 5)
-            mclk_brg = (immr->im_brgc6 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            mclk_brg = (*IM_BRGC6 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (MCLK_BRG == 6)
-            mclk_brg = (immr->im_brgc7 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            mclk_brg = (*IM_BRGC7 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (MCLK_BRG == 7)
-            mclk_brg = (immr->im_brgc8 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            mclk_brg = (*IM_BRGC8 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 
-        /*
+        /* 
          * Obtain the enabled SCLK BRG value
          */
 #       if (SCLK_BRG == 0)
-            sclk_brg = (immr->im_brgc1 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            sclk_brg = (*IM_BRGC1 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (SCLK_BRG == 1)
-            sclk_brg = (immr->im_brgc2 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            sclk_brg = (*IM_BRGC2 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (SCLK_BRG == 2)
-            sclk_brg = (immr->im_brgc3 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            sclk_brg = (*IM_BRGC3 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (SCLK_BRG == 3)
-            sclk_brg = (immr->im_brgc4 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            sclk_brg = (*IM_BRGC4 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (SCLK_BRG == 4)
-            sclk_brg = (immr->im_brgc5 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            sclk_brg = (*IM_BRGC5 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (SCLK_BRG == 5)
-            sclk_brg = (immr->im_brgc6 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            sclk_brg = (*IM_BRGC6 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (SCLK_BRG == 6)
-            sclk_brg = (immr->im_brgc7 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            sclk_brg = (*IM_BRGC7 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (SCLK_BRG == 7)
-            sclk_brg = (immr->im_brgc8 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            sclk_brg = (*IM_BRGC8 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 
-        /*
+        /* 
          * Obtain the enabled LRCLK BRG value
          */
 #       if (LRCLK_BRG == 0)
-            lrclk_brg = (immr->im_brgc1 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            lrclk_brg = (*IM_BRGC1 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (LRCLK_BRG == 1)
-            lrclk_brg = (immr->im_brgc2 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            lrclk_brg = (*IM_BRGC2 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (LRCLK_BRG == 2)
-            lrclk_brg = (immr->im_brgc3 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            lrclk_brg = (*IM_BRGC3 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (LRCLK_BRG == 3)
-            lrclk_brg = (immr->im_brgc4 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            lrclk_brg = (*IM_BRGC4 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (LRCLK_BRG == 4)
-            lrclk_brg = (immr->im_brgc5 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            lrclk_brg = (*IM_BRGC5 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (LRCLK_BRG == 5)
-            lrclk_brg = (immr->im_brgc6 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            lrclk_brg = (*IM_BRGC6 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (LRCLK_BRG == 6)
-            lrclk_brg = (immr->im_brgc7 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            lrclk_brg = (*IM_BRGC7 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 #       if (LRCLK_BRG == 7)
-            lrclk_brg = (immr->im_brgc8 & ~CPM_BRG_RST) | CPM_BRG_EN;
+            lrclk_brg = (*IM_BRGC8 & ~CPM_BRG_RST) | CPM_BRG_EN;
 #       endif
 
 	/* Save off the real LRCLK value */
@@ -639,7 +768,7 @@ void Daq_Start_Clocks(int sample_rate)
 
 	/* Compute the delay as a function of SCLK count */
         delay_cnt = ((sclk_cnt / 4) - 2) * 10 + 6;
-	if (sample_rate == 43402) {
+	if (DaqSampleRate == 43402) {
 	  delay_cnt++;
 	}
 
@@ -649,117 +778,129 @@ void Daq_Start_Clocks(int sample_rate)
         /* Insert the count */
 	temp_lrclk_brg |= ((delay_cnt + (sclk_cnt / 2) - 1) << 1) &  0x00001FFE;
 
-        /*
+	/*
+	 * Disable interrupt and save the current state
+	 */
+	flag = disable_interrupts();
+
+        /* 
          * Enable MCLK BRG
          */
 #       if (MCLK_BRG == 0)
-            immr->im_brgc1 = mclk_brg;
+            *IM_BRGC1 = mclk_brg;
 #       endif
 #       if (MCLK_BRG == 1)
-            immr->im_brgc2 = mclk_brg;
+            *IM_BRGC2 = mclk_brg;
 #       endif
 #       if (MCLK_BRG == 2)
-            immr->im_brgc3 = mclk_brg;
+            *IM_BRGC3 = mclk_brg;
 #       endif
 #       if (MCLK_BRG == 3)
-            immr->im_brgc4 = mclk_brg;
+            *IM_BRGC4 = mclk_brg;
 #       endif
 #       if (MCLK_BRG == 4)
-            immr->im_brgc5 = mclk_brg;
+            *IM_BRGC5 = mclk_brg;
 #       endif
 #       if (MCLK_BRG == 5)
-            immr->im_brgc6 = mclk_brg;
+            *IM_BRGC6 = mclk_brg;
 #       endif
 #       if (MCLK_BRG == 6)
-            immr->im_brgc7 = mclk_brg;
+            *IM_BRGC7 = mclk_brg;
 #       endif
 #       if (MCLK_BRG == 7)
-            immr->im_brgc8 = mclk_brg;
+            *IM_BRGC8 = mclk_brg;
 #       endif
 
-        /*
+        /* 
          * Enable SCLK BRG
          */
 #       if (SCLK_BRG == 0)
-            immr->im_brgc1 = sclk_brg;
+            *IM_BRGC1 = sclk_brg;
 #       endif
 #       if (SCLK_BRG == 1)
-            immr->im_brgc2 = sclk_brg;
+            *IM_BRGC2 = sclk_brg;
 #       endif
 #       if (SCLK_BRG == 2)
-            immr->im_brgc3 = sclk_brg;
+            *IM_BRGC3 = sclk_brg;
 #       endif
 #       if (SCLK_BRG == 3)
-            immr->im_brgc4 = sclk_brg;
+            *IM_BRGC4 = sclk_brg;
 #       endif
 #       if (SCLK_BRG == 4)
-            immr->im_brgc5 = sclk_brg;
+            *IM_BRGC5 = sclk_brg;
 #       endif
 #       if (SCLK_BRG == 5)
-            immr->im_brgc6 = sclk_brg;
+            *IM_BRGC6 = sclk_brg;
 #       endif
 #       if (SCLK_BRG == 6)
-            immr->im_brgc7 = sclk_brg;
+            *IM_BRGC7 = sclk_brg;
 #       endif
 #       if (SCLK_BRG == 7)
-            immr->im_brgc8 = sclk_brg;
+            *IM_BRGC8 = sclk_brg;
 #       endif
 
-        /*
+        /* 
          * Enable LRCLK BRG (1st time - temporary)
          */
 #       if (LRCLK_BRG == 0)
-             immr->im_brgc1 = temp_lrclk_brg;
+            *IM_BRGC1 = temp_lrclk_brg;
 #       endif
 #       if (LRCLK_BRG == 1)
-             immr->im_brgc2 = temp_lrclk_brg;
+            *IM_BRGC2 = temp_lrclk_brg;
 #       endif
 #       if (LRCLK_BRG == 2)
-             immr->im_brgc3 = temp_lrclk_brg;
+            *IM_BRGC3 = temp_lrclk_brg;
 #       endif
 #       if (LRCLK_BRG == 3)
-             immr->im_brgc4 = temp_lrclk_brg;
+            *IM_BRGC4 = temp_lrclk_brg;
 #       endif
 #       if (LRCLK_BRG == 4)
-             immr->im_brgc5 = temp_lrclk_brg;
+            *IM_BRGC5 = temp_lrclk_brg;
 #       endif
 #       if (LRCLK_BRG == 5)
-             immr->im_brgc6 = temp_lrclk_brg;
+            *IM_BRGC6 = temp_lrclk_brg;
 #       endif
 #       if (LRCLK_BRG == 6)
-             immr->im_brgc7 = temp_lrclk_brg;
+            *IM_BRGC7 = temp_lrclk_brg;
 #       endif
 #       if (LRCLK_BRG == 7)
-             immr->im_brgc8 = temp_lrclk_brg;
+            *IM_BRGC8 = temp_lrclk_brg;
 #       endif
-
-        /*
+	
+        /* 
          * Enable LRCLK BRG (2nd time - permanent)
          */
 #       if (LRCLK_BRG == 0)
-             immr->im_brgc1 = real_lrclk_brg;
+            *IM_BRGC1 = real_lrclk_brg;
 #       endif
 #       if (LRCLK_BRG == 1)
-             immr->im_brgc2 = real_lrclk_brg;
+            *IM_BRGC2 = real_lrclk_brg;
 #       endif
 #       if (LRCLK_BRG == 2)
-             immr->im_brgc3 = real_lrclk_brg;
+            *IM_BRGC3 = real_lrclk_brg;
 #       endif
 #       if (LRCLK_BRG == 3)
-             immr->im_brgc4 = real_lrclk_brg;
+            *IM_BRGC4 = real_lrclk_brg;
 #       endif
 #       if (LRCLK_BRG == 4)
-             immr->im_brgc5 = real_lrclk_brg;
+            *IM_BRGC5 = real_lrclk_brg;
 #       endif
 #       if (LRCLK_BRG == 5)
-             immr->im_brgc6 = real_lrclk_brg;
+            *IM_BRGC6 = real_lrclk_brg;
 #       endif
 #       if (LRCLK_BRG == 6)
-             immr->im_brgc7 = real_lrclk_brg;
+            *IM_BRGC7 = real_lrclk_brg;
 #       endif
 #       if (LRCLK_BRG == 7)
-             immr->im_brgc8 = real_lrclk_brg;
+            *IM_BRGC8 = real_lrclk_brg;
 #       endif
+
+	/*
+	 * Restore the Interrupt state
+	 */
+	if (flag) {
+	    enable_interrupts();
+        }
 #   else
         /*
          * Enable the clocks
diff --git a/board/sacsng/clkinit.h b/board/sacsng/clkinit.h
index 02086d414b1..2731f2e7ca8 100644
--- a/board/sacsng/clkinit.h
+++ b/board/sacsng/clkinit.h
@@ -61,6 +61,9 @@
                                  /* The 8260 (Mask B.3) seems to have     */
                                  /* problems generating LRCLK from SCLK   */
 
+#define NUM_LRCLKS_TO_STABILIZE 1  /* Number of LRCLK period (sample)     */
+				   /* to wait for the clock to stabilize  */
+
 #define CPM_CLK      (gd->bd->bi_cpmfreq)
 #define DFBRG        4
 #define BRG_INT_CLK  (CPM_CLK * 2 / DFBRG)
@@ -80,6 +83,15 @@
 #define CPM_BRG_EXTC_CLK5       2
 #define CPM_BRG_EXTC_CLK15      CPM_BRG_EXTC_CLK5
 
+#define IM_BRGC1 ((uint *)0xf00119f0)
+#define IM_BRGC2 ((uint *)0xf00119f4)
+#define IM_BRGC3 ((uint *)0xf00119f8)
+#define IM_BRGC4 ((uint *)0xf00119fc)
+#define IM_BRGC5 ((uint *)0xf00115f0)
+#define IM_BRGC6 ((uint *)0xf00115f4)
+#define IM_BRGC7 ((uint *)0xf00115f8)
+#define IM_BRGC8 ((uint *)0xf00115fc)
+
 /*
  * External declarations
  */
@@ -105,7 +117,6 @@ extern void Daq_BRG_Set_ExtClk(uint brg, uint extc);
 extern uint Daq_BRG_Rate(uint brg);
 
 extern uint Daq_Get_SampleRate(void);
-extern uint Daq_Set_SampleRate(uint rate, uint force);
 
 extern void Daq_Init_Clocks(int sample_rate, int sample_64x);
 extern void Daq_Stop_Clocks(void);
diff --git a/board/sacsng/sacsng.c b/board/sacsng/sacsng.c
index 0f0f0e6cc03..19dbb97e605 100644
--- a/board/sacsng/sacsng.c
+++ b/board/sacsng/sacsng.c
@@ -26,7 +26,6 @@
 #include <common.h>
 #include <ioports.h>
 #include <mpc8260.h>
-/*NO// #include <memtest.h> */
 #include <i2c.h>
 #include <spi.h>
 
@@ -486,9 +485,25 @@ int misc_init_r(void)
 	}
     }
 
+    /* 
+     * Stop the clocks and wait for at least 1 LRCLK period
+     * to make sure the clocking has really stopped.
+     */
+    Daq_Stop_Clocks();
+    udelay((1000000 / sample_rate) * NUM_LRCLKS_TO_STABILIZE);
+
+    /*
+     * Initialize the clocks with the new rates
+     */
     Daq_Init_Clocks(sample_rate, sample_64x);
     sample_rate = Daq_Get_SampleRate();
+
+    /*
+     * Start the clocks and wait for at least 1 LRCLK period
+     * to make sure the clocking has become stable.
+     */
     Daq_Start_Clocks(sample_rate);
+    udelay((1000000 / sample_rate) * NUM_LRCLKS_TO_STABILIZE);
 
     sprintf(str_buf, "%d", sample_rate);
     setenv("DaqSampleRate", str_buf);
@@ -792,10 +807,12 @@ void spi_dac_chipsel(int cs)
  * chip selects: it calls the appropriate function to control the SPI
  * chip selects.
  */
-spi_chipsel_type spi_chipsel[2] = {
+spi_chipsel_type spi_chipsel[] = {
 	spi_adc_chipsel,
 	spi_dac_chipsel
 };
+int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
+
 #endif /* CFG_CMD_SPI */
 
 #endif /* CONFIG_MISC_INIT_R */