Initial revision

1 files changed, 573 insertions, 0 deletions

diff --git a/board/siemens/SCM/scm.c b/board/siemens/SCM/scm.c
new file mode 100644
index 00000000000..aa6181d8d72
--- /dev/null
+++ b/board/siemens/SCM/scm.c
@@ -0,0 +1,573 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+
+#include "scm.h"
+
+static void config_scoh_cs(void);
+extern int  fpga_init(void);
+
+#if 0
+#define DEBUGF(fmt,args...)   printf (fmt ,##args)
+#else
+#define DEBUGF(fmt,args...)
+#endif
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+    /* Port A configuration */
+    {	/*	      conf ppar psor pdir podr pdat */
+	/* PA31 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII COL */
+	/* PA30 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII CRS */
+	/* PA29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC1 MII TX_ER */
+	/* PA28 */ {   1,   1,   1,   1,   0,   0   }, /* FCC1 MII TX_EN */
+	/* PA27 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII RX_DV */
+	/* PA26 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII RX_ER */
+	/* PA25 */ {   0,   0,   0,   1,   0,   0   },
+	/* PA24 */ {   0,   0,   0,   1,   0,   0   },
+	/* PA23 */ {   0,   0,   0,   1,   0,   0   },
+	/* PA22 */ {   0,   0,   0,   1,   0,   0   },
+	/* PA21 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[3] */
+	/* PA20 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[2] */
+	/* PA19 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[1] */
+	/* PA18 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[0] */
+	/* PA17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[0] */
+	/* PA16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[1]*/
+	/* PA15 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[2] */
+	/* PA14 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[3] */
+	/* PA13 */ {   0,   0,   0,   1,   0,   0   },
+	/* PA12 */ {   0,   0,   0,   1,   0,   0   },
+	/* PA11 */ {   0,   0,   0,   1,   0,   0   },
+	/* PA10 */ {   0,   0,   0,   1,   0,   0   },
+	/* PA9  */ {   1,   1,   1,   1,   0,   0   }, /* TDM_A1 L1TXD0 */
+	/* PA8  */ {   1,   1,   1,   0,   0,   0   }, /* TDM_A1 L1RXD0 */
+	/* PA7  */ {   1,   1,   1,   0,   0,   0   }, /* TDM_A1 L1TSYNC */
+	/* PA6  */ {   1,   1,   1,   0,   0,   0   }, /* TDM_A1 L1RSYNC */
+	/* PA5  */ {   1,   0,   0,   0,   0,   0   }, /* FIOX_FPGA_PR */
+	/* PA4  */ {   1,   0,   0,   0,   0,   0   }, /* DOHM_FPGA_PR */
+	/* PA3  */ {   1,   1,   0,   0,   0,   0   }, /* TDM RXCLK4 */
+	/* PA2  */ {   1,   1,   0,   0,   0,   0   }, /* TDM TXCLK4 */
+	/* PA1  */ {   0,   0,   0,   1,   0,   0   },
+	/* PA0  */ {   1,   0,   0,   0,   0,   0   }  /* BUSY */
+    },
+
+    /* Port B configuration */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PB31 */ {   1,   0,   0,   1,   0,   0   }, /* EQ_ALARM_MIN */
+	/* PB30 */ {   1,   0,   0,   1,   0,   0   }, /* EQ_ALARM_MAJ */
+	/* PB29 */ {   1,   0,   0,   1,   0,   0   }, /* COM_ALARM_MIN */
+	/* PB28 */ {   1,   0,   0,   1,   0,   0   }, /* COM_ALARM_MAJ */
+	/* PB27 */ {   0,   1,   0,   0,   0,   0   },
+	/* PB26 */ {   0,   1,   0,   0,   0,   0   },
+	/* PB25 */ {   1,   0,   0,   1,   0,   0   }, /* LED_GREEN_L */
+	/* PB24 */ {   1,   0,   0,   1,   0,   0   }, /* LED_RED_L */
+	/* PB23 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_D2 L1TXD */
+	/* PB22 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_D2 L1RXD */
+	/* PB21 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_D2 L1TSYNC */
+	/* PB20 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_D2 L1RSYNC */
+	/* PB19 */ {   1,   0,   0,   0,   0,   0   }, /* UID */
+	/* PB18 */ {   0,   1,   0,   0,   0,   0   },
+        /* PB17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RX_DV */
+        /* PB16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RX_ER */
+        /* PB15 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TX_ER */
+        /* PB14 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TX_EN */
+        /* PB13 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII COL */
+        /* PB12 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII CRS */
+        /* PB11 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[3] */
+        /* PB10 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[2] */
+        /* PB9  */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[1] */
+        /* PB8  */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[0] */
+        /* PB7  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[3] */
+        /* PB6  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[2] */
+        /* PB5  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[1] */
+        /* PB4  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[0] */
+	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
+    },
+
+    /* Port C configuration */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PC31 */ {   1,   1,   0,   0,   0,   0   }, /* TDM RXCLK1 */
+	/* PC30 */ {   1,   1,   0,   0,   0,   0   }, /* TDM TXCLK1 */
+	/* PC29 */ {   1,   1,   0,   0,   0,   0   }, /* TDM RXCLK3 */
+	/* PC28 */ {   1,   1,   0,   0,   0,   0   }, /* TDM TXCLK3 */
+	/* PC27 */ {   1,   1,   0,   0,   0,   0   }, /* TDM RXCLK2 */
+	/* PC26 */ {   1,   1,   0,   0,   0,   0   }, /* TDM TXCLK2 */
+	/* PC25 */ {   0,   0,   0,   1,   0,   0   },
+	/* PC24 */ {   0,   0,   0,   1,   0,   0   },
+	/* PC23 */ {   0,   1,   0,   1,   0,   0   },
+	/* PC22 */ {   0,   1,   0,   0,   0,   0   },
+	/* PC21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII TX_CLK */
+	/* PC20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RX_CLK */
+	/* PC19 */ {   0,   1,   0,   0,   0,   0   },
+	/* PC18 */ {   0,   1,   0,   0,   0,   0   },
+        /* PC17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RX_CLK */
+        /* PC16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII TX_CLK */
+	/* PC15 */ {   0,   0,   0,   1,   0,   0   },
+	/* PC14 */ {   0,   1,   0,   0,   0,   0   },
+	/* PC13 */ {   0,   0,   0,   1,   0,   0   }, /* RES_PHY_L */
+	/* PC12 */ {   0,   0,   0,   1,   0,   0   },
+	/* PC11 */ {   0,   0,   0,   1,   0,   0   },
+	/* PC10 */ {   0,   0,   0,   1,   0,   0   },
+	/* PC9  */ {   0,   1,   1,   0,   0,   0   }, /* TDM_A2 L1TSYNC */
+	/* PC8  */ {   0,   0,   0,   0,   0,   0   }, /* FEP_RDY */
+	/* PC7  */ {   0,   0,   0,   0,   0,   0   },
+	/* PC6  */ {   0,   0,   0,   0,   0,   0   }, /* UC4_ALARM_L */
+	/* PC5  */ {   0,   0,   0,   0,   0,   0   }, /* UC3_ALARM_L */
+	/* PC4  */ {   0,   0,   0,   0,   0,   0   }, /* UC2_ALARM_L */
+	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* RES_MISC_L */
+	/* PC2  */ {   0,   0,   0,   1,   0,   0   }, /* RES_OH_L */
+	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* RES_DOHM_L */
+	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* RES_FIOX_L */
+    },
+
+    /* Port D configuration */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
+	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
+	/* PD29 */ {   0,   0,   0,   0,   0,   0   }, /* INIT_F */
+	/* PD28 */ {   0,   0,   0,   1,   0,   0   }, /* DONE_F */
+	/* PD27 */ {   0,   0,   0,   0,   0,   0   }, /* INIT_D */
+	/* PD26 */ {   0,   0,   0,   1,   0,   0   }, /* DONE_D */
+	/* PD25 */ {   0,   0,   0,   1,   0,   0   },
+	/* PD24 */ {   0,   0,   0,   1,   0,   0   },
+	/* PD23 */ {   0,   0,   0,   1,   0,   0   },
+	/* PD22 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_A2 L1TXD */
+	/* PD21 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_A2 L1RXD */
+	/* PD20 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_A2 L1RSYNC */
+	/* PD19 */ {   1,   1,   1,   0,   0,   0   }, /* SPI SPISEL */
+	/* PD18 */ {   1,   1,   1,   0,   0,   0   }, /* SPI SPICLK */
+	/* PD17 */ {   1,   1,   1,   0,   0,   0   }, /* SPI SPIMOSI */
+	/* PD16 */ {   1,   1,   1,   0,   0,   0   }, /* SPI SPIMOSO */
+#if defined(CONFIG_SOFT_I2C)
+	/* PD15 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SDA */
+	/* PD14 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SCL */
+#else
+#if defined(CONFIG_HARD_I2C)
+	/* PD15 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SDA */
+	/* PD14 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SCL */
+#else /* normal I/O port pins */
+	/* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
+	/* PD14 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SCL */
+#endif
+#endif
+	/* PD13 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_B1 L1TXD */
+	/* PD12 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_B1 L1RXD */
+	/* PD11 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_B1 L1TSYNC */
+	/* PD10 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_B1 L1RSYNC */
+	/* PD9  */ {   1,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
+	/* PD8  */ {   1,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
+	/* PD7  */ {   0,   0,   0,   1,   0,   1   },
+	/* PD6  */ {   0,   0,   0,   1,   0,   1   },
+	/* PD5  */ {   0,   0,   0,   1,   0,   0   }, /* PROG_F */
+	/* PD4  */ {   0,   0,   0,   1,   0,   0   }, /* PROG_D */
+	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
+    }
+};
+
+/* ------------------------------------------------------------------------- */
+
+/* Check Board Identity:
+ */
+int checkboard (void)
+{
+	unsigned char str[64];
+	int i = getenv_r ("serial#", str, sizeof (str));
+
+	puts ("Board: ");
+
+	if (!i || strncmp (str, "TQM8260", 7)) {
+		puts ("### No HW ID - assuming TQM8260\n");
+		return (0);
+	}
+
+	puts (str);
+	putc ('\n');
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
+ *
+ * This routine performs standard 8260 initialization sequence
+ * and calculates the available memory size. It may be called
+ * several times to try different SDRAM configurations on both
+ * 60x and local buses.
+ */
+static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
+						  ulong orx, volatile uchar * base)
+{
+	volatile uchar c = 0xff;
+	ulong cnt, val;
+	volatile ulong *addr;
+	volatile uint *sdmr_ptr;
+	volatile uint *orx_ptr;
+	int i;
+	ulong save[32];				/* to make test non-destructive */
+	ulong maxsize;
+
+	/* We must be able to test a location outsize the maximum legal size
+	 * to find out THAT we are outside; but this address still has to be
+	 * mapped by the controller. That means, that the initial mapping has
+	 * to be (at least) twice as large as the maximum expected size.
+	 */
+	maxsize = (1 + (~orx | 0x7fff)) / 2;
+
+	/* Since CFG_SDRAM_BASE is always 0 (??), we assume that
+	 * we are configuring CS1 if base != 0
+	 */
+	sdmr_ptr = base ? &memctl->memc_lsdmr : &memctl->memc_psdmr;
+	orx_ptr = base ? &memctl->memc_or2 : &memctl->memc_or1;
+
+	*orx_ptr = orx;
+
+	/*
+	 * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+	 *
+	 * "At system reset, initialization software must set up the
+	 *  programmable parameters in the memory controller banks registers
+	 *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+	 *  system software should execute the following initialization sequence
+	 *  for each SDRAM device.
+	 *
+	 *  1. Issue a PRECHARGE-ALL-BANKS command
+	 *  2. Issue eight CBR REFRESH commands
+	 *  3. Issue a MODE-SET command to initialize the mode register
+	 *
+	 *  The initial commands are executed by setting P/LSDMR[OP] and
+	 *  accessing the SDRAM with a single-byte transaction."
+	 *
+	 * The appropriate BRx/ORx registers have already been set when we
+	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 */
+
+	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
+	*base = c;
+
+	*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
+	for (i = 0; i < 8; i++)
+		*base = c;
+
+	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
+	*(base + CFG_MRS_OFFS) = c;	/* setting MR on address lines */
+
+	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+	*base = c;
+
+	/*
+	 * Check memory range for valid RAM. A simple memory test determines
+	 * the actually available RAM size between addresses `base' and
+	 * `base + maxsize'. Some (not all) hardware errors are detected:
+	 * - short between address lines
+	 * - short between data lines
+	 */
+	i = 0;
+	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
+		addr = (volatile ulong *) base + cnt;	/* pointer arith! */
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	addr = (volatile ulong *) base;
+	save[i] = *addr;
+	*addr = 0;
+
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+		addr = (volatile ulong *) base + cnt;	/* pointer arith! */
+		val = *addr;
+		*addr = save[--i];
+		if (val != ~cnt) {
+			/* Write the actual size to ORx
+			 */
+			*orx_ptr = orx | ~(cnt * sizeof (long) - 1);
+			return (cnt * sizeof (long));
+		}
+	}
+	return (maxsize);
+}
+
+/*
+ * Test Power-On-Reset.
+ */
+int power_on_reset (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* Test Reset Status Register */
+	return gd->reset_status & RSR_CSRS ? 0 : 1;
+}
+
+long int initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8260_t *memctl = &immap->im_memctl;
+
+#ifndef CFG_RAMBOOT
+	long size8, size9;
+#endif
+	long psize, lsize;
+
+	psize = 16 * 1024 * 1024;
+	lsize = 0;
+
+	memctl->memc_psrt = CFG_PSRT;
+	memctl->memc_mptpr = CFG_MPTPR;
+
+#if 0							/* Just for debugging */
+#define	prt_br_or(brX,orX) do {				\
+    ulong start =  memctl->memc_ ## brX & 0xFFFF8000;	\
+    ulong sizem = ~memctl->memc_ ## orX | 0x00007FFF;	\
+    printf ("\n"					\
+    	    #brX " 0x%08x  " #orX " 0x%08x "		\
+	    "==> 0x%08lx ... 0x%08lx = %ld MB\n",	\
+	memctl->memc_ ## brX, memctl->memc_ ## orX,	\
+	start, start+sizem, (sizem+1)>>20);		\
+    } while (0)
+	prt_br_or (br0, or0);
+	prt_br_or (br1, or1);
+	prt_br_or (br2, or2);
+	prt_br_or (br3, or3);
+#endif
+
+#ifndef CFG_RAMBOOT
+	/* 60x SDRAM setup:
+	 */
+	size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR1_8COL,
+					  (uchar *) CFG_SDRAM_BASE);
+	size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR1_9COL,
+					  (uchar *) CFG_SDRAM_BASE);
+
+	if (size8 < size9) {
+		psize = size9;
+		printf ("(60x:9COL - %ld MB, ", psize >> 20);
+	} else {
+		psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR1_8COL,
+						  (uchar *) CFG_SDRAM_BASE);
+		printf ("(60x:8COL - %ld MB, ", psize >> 20);
+	}
+
+	/* Local SDRAM setup:
+	 */
+#ifdef CFG_INIT_LOCAL_SDRAM
+	memctl->memc_lsrt = CFG_LSRT;
+	size8 = try_init (memctl, CFG_LSDMR_8COL, CFG_OR2_8COL,
+					  (uchar *) SDRAM_BASE2_PRELIM);
+	size9 = try_init (memctl, CFG_LSDMR_9COL, CFG_OR2_9COL,
+					  (uchar *) SDRAM_BASE2_PRELIM);
+
+	if (size8 < size9) {
+		lsize = size9;
+		printf ("Local:9COL - %ld MB) using ", lsize >> 20);
+	} else {
+		lsize = try_init (memctl, CFG_LSDMR_8COL, CFG_OR2_8COL,
+						  (uchar *) SDRAM_BASE2_PRELIM);
+		printf ("Local:8COL - %ld MB) using ", lsize >> 20);
+	}
+
+#if 0
+	/* Set up BR2 so that the local SDRAM goes
+	 * right after the 60x SDRAM
+	 */
+	memctl->memc_br2 = (CFG_BR2_PRELIM & ~BRx_BA_MSK) |
+			(CFG_SDRAM_BASE + psize);
+#endif
+#endif /* CFG_INIT_LOCAL_SDRAM */
+#endif /* CFG_RAMBOOT */
+
+	icache_enable ();
+
+	config_scoh_cs ();
+
+	return (psize);
+}
+
+/* ------------------------------------------------------------------------- */
+
+static void config_scoh_cs (void)
+{
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile memctl8260_t *memctl = &immr->im_memctl;
+	volatile can_reg_t *can = (volatile can_reg_t *) CFG_CAN0_BASE;
+	volatile uint tmp, i;
+
+	/* Initialize OR3 / BR3 for CAN Bus Controller 0 */
+	memctl->memc_or3 = CFG_CAN0_OR3;
+	memctl->memc_br3 = CFG_CAN0_BR3;
+	/* Initialize OR4 / BR4 for CAN Bus Controller 1 */
+	memctl->memc_or4 = CFG_CAN1_OR4;
+	memctl->memc_br4 = CFG_CAN1_BR4;
+
+	/* Initialize MAMR to write in the array at address 0x0 */
+	memctl->memc_mamr = 0x00 | MxMR_OP_WARR | MxMR_GPL_x4DIS;
+
+	/* Initialize UPMA for CAN: single read */
+	memctl->memc_mdr = 0xcffeec00;
+	udelay (1);					/* Necessary to have the data correct in the UPM array!!!! */
+	/* The read on the CAN controller write the data of mdr in UPMA array. */
+	/* The index to the array will be incremented automatically
+	   through this read */
+	tmp = can->cpu_interface;
+
+	memctl->memc_mdr = 0x0ffcec00;
+	udelay (1);
+	tmp = can->cpu_interface;
+
+	memctl->memc_mdr = 0x0ffcec00;
+	udelay (1);
+	tmp = can->cpu_interface;
+
+	memctl->memc_mdr = 0x0ffcec00;
+	udelay (1);
+	tmp = can->cpu_interface;
+
+	memctl->memc_mdr = 0x0ffcec00;
+	udelay (1);
+	tmp = can->cpu_interface;
+
+	memctl->memc_mdr = 0x0ffcfc00;
+	udelay (1);
+	tmp = can->cpu_interface;
+
+	memctl->memc_mdr = 0x0ffcfc00;
+	udelay (1);
+	tmp = can->cpu_interface;
+
+	memctl->memc_mdr = 0xfffdec07;
+	udelay (1);
+	tmp = can->cpu_interface;
+
+
+	/* Initialize MAMR to write in the array at address 0x18 */
+	memctl->memc_mamr = 0x18 | MxMR_OP_WARR | MxMR_GPL_x4DIS;
+
+	/* Initialize UPMA for CAN: single write */
+	memctl->memc_mdr = 0xfcffec00;
+	udelay (1);
+	tmp = can->cpu_interface;
+
+	memctl->memc_mdr = 0x00ffec00;
+	udelay (1);
+	tmp = can->cpu_interface;
+
+	memctl->memc_mdr = 0x00ffec00;
+	udelay (1);
+	tmp = can->cpu_interface;
+
+	memctl->memc_mdr = 0x00ffec00;
+	udelay (1);
+	tmp = can->cpu_interface;
+
+	memctl->memc_mdr = 0x00ffec00;
+	udelay (1);
+	tmp = can->cpu_interface;
+
+	memctl->memc_mdr = 0x00fffc00;
+	udelay (1);
+	tmp = can->cpu_interface;
+
+	memctl->memc_mdr = 0x00fffc00;
+	udelay (1);
+	tmp = can->cpu_interface;
+
+	memctl->memc_mdr = 0x30ffec07;
+	udelay (1);
+	tmp = can->cpu_interface;
+
+	/* Initialize MAMR */
+	memctl->memc_mamr = MxMR_GPL_x4DIS;	/* GPL_B4 ouput line Disable */
+
+
+	/* Initialize OR5 / BR5 for the extended EEPROM Bank0 */
+	memctl->memc_or5 = CFG_EXTPROM_OR5;
+	memctl->memc_br5 = CFG_EXTPROM_BR5;
+	/* Initialize OR6 / BR6 for the extended EEPROM Bank1 */
+	memctl->memc_or6 = CFG_EXTPROM_OR6;
+	memctl->memc_br6 = CFG_EXTPROM_BR6;
+
+	/* Initialize OR7 / BR7 for the Glue Logic */
+	memctl->memc_or7 = CFG_FIOX_OR7;
+	memctl->memc_br7 = CFG_FIOX_BR7;
+
+	/* Initialize OR8 / BR8 for the DOH Logic */
+	memctl->memc_or8 = CFG_FDOHM_OR8;
+	memctl->memc_br8 = CFG_FDOHM_BR8;
+
+	DEBUGF ("OR0 %08x   BR0 %08x\n", memctl->memc_or0, memctl->memc_br0);
+	DEBUGF ("OR1 %08x   BR1 %08x\n", memctl->memc_or1, memctl->memc_br1);
+	DEBUGF ("OR2 %08x   BR2 %08x\n", memctl->memc_or2, memctl->memc_br2);
+	DEBUGF ("OR3 %08x   BR3 %08x\n", memctl->memc_or3, memctl->memc_br3);
+	DEBUGF ("OR4 %08x   BR4 %08x\n", memctl->memc_or4, memctl->memc_br4);
+	DEBUGF ("OR5 %08x   BR5 %08x\n", memctl->memc_or5, memctl->memc_br5);
+	DEBUGF ("OR6 %08x   BR6 %08x\n", memctl->memc_or6, memctl->memc_br6);
+	DEBUGF ("OR7 %08x   BR7 %08x\n", memctl->memc_or7, memctl->memc_br7);
+	DEBUGF ("OR8 %08x   BR8 %08x\n", memctl->memc_or8, memctl->memc_br8);
+
+	DEBUGF ("UPMA  addr 0x0\n");
+	memctl->memc_mamr = 0x00 | MxMR_OP_RARR | MxMR_GPL_x4DIS;
+	for (i = 0; i < 0x8; i++) {
+		tmp = can->cpu_interface;
+		udelay (1);
+		DEBUGF (" %08x ", memctl->memc_mdr);
+	}
+	DEBUGF ("\nUPMA  addr 0x18\n");
+	memctl->memc_mamr = 0x18 | MxMR_OP_RARR | MxMR_GPL_x4DIS;
+	for (i = 0; i < 0x8; i++) {
+		tmp = can->cpu_interface;
+		udelay (1);
+		DEBUGF (" %08x ", memctl->memc_mdr);
+	}
+	DEBUGF ("\n");
+	memctl->memc_mamr = MxMR_GPL_x4DIS;
+}
+
+/* ------------------------------------------------------------------------- */
+
+int misc_init_r (void)
+{
+	fpga_init ();
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */