imximage.cfg: run files through C preprocessor

The '#' used as comments in the files cause the preprocessor
trouble, so change to /* */.

The mkimage command which uses this preprocessor output
was moved to arch/arm/imx-common/Makefile

.gitignore was updated to ignore .cfgtmp files.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

1 files changed, 157 insertions, 138 deletions

diff --git a/board/ttcontrol/vision2/imximage_hynix.cfg b/board/ttcontrol/vision2/imximage_hynix.cfg
index ed531db0bc6..c1de94fa139 100644
--- a/board/ttcontrol/vision2/imximage_hynix.cfg
+++ b/board/ttcontrol/vision2/imximage_hynix.cfg
@@ -1,209 +1,228 @@
-#
-# (C) Copyright 2009
-# Stefano Babic DENX Software Engineering sbabic@denx.de.
-#
-# (C) Copyright 2010
-# Klaus Steinhammer TTECH Control Gmbh kst@tttech.com
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not write to the Free Software
-# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
-# MA 02110-1301 USA
-#
-# Refer docs/README.imxmage for more details about how-to configure
-# and create imximage boot image
-#
-# The syntax is taken as close as possible with the kwbimage
-
-# Boot Device : one of
-# spi, nand, onenand, sd
-
+/*
+ * (C) Copyright 2009
+ * Stefano Babic DENX Software Engineering sbabic@denx.de.
+ *
+ * (C) Copyright 2010
+ * Klaus Steinhammer TTECH Control Gmbh kst@tttech.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/*
+ * Boot Device : one of
+ * spi, nand, onenand, sd
+ */
 BOOT_FROM	spi
 
-# Device Configuration Data (DCD)
-#
-# Each entry must have the format:
-# Addr-type           Address        Value
-#
-# where:
-#	Addr-type register length (1,2 or 4 bytes)
-#	Address	  absolute address of the register
-#	value	  value to be stored in the register
-
-#######################
-### Disable WDOG ###
-#######################
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+
+/*
+ * #######################
+ * ### Disable WDOG ###
+ * #######################
+ */
 DATA 2 0x73f98000 0x30
 
-#######################
-### SET DDR Clk     ###
-#######################
-
-# CCM: CBMCR - ddr_clk_sel: axi_b (133MHz)
+/*
+ * #######################
+ * ### SET DDR Clk     ###
+ * #######################
+ */
+/* CCM: CBMCR - ddr_clk_sel: axi_b (133MHz) */
 DATA 4 0x73FD4018 0x000024C0
 
-# DOUBLE SPI CLK (13MHz->26 MHz Clock)
+/* DOUBLE SPI CLK (13MHz->26 MHz Clock) */
 DATA 4 0x73FD4038 0x2010241
 
-#IOMUXC_SW_PAD_CTL_PAD_CSPI1_MOSI HYS_ENABLE | DRV_MAX | SRE_FAST
+/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_MOSI HYS_ENABLE | DRV_MAX | SRE_FAST */
 DATA 4 0x73fa8600 0x00000107
-#IOMUXC_SW_PAD_CTL_PAD_CSPI1_MISO HYS_ENABLE | DRV_MAX | SRE_FAST
+/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_MISO HYS_ENABLE | DRV_MAX | SRE_FAST */
 DATA 4 0x73fa8604 0x00000107
-#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS0 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST
+/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS0 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST */
 DATA 4 0x73fa8608 0x00000187
-#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS1 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST
+/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS1 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST */
 DATA 4 0x73fa860c 0x00000187
-#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SCLK HYS_ENABLE | DRV_MAX | SRE_FAST
+/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SCLK HYS_ENABLE | DRV_MAX | SRE_FAST */
 DATA 4 0x73fa8614 0x00000107
-#IOMUXC_SW_PAD_CTL_PAD_DI1_PIN11 HYS_ENABLE | DRV_MAX | SRE_FAST (CSPI1_SS2)
+/* IOMUXC_SW_PAD_CTL_PAD_DI1_PIN11 HYS_ENABLE | DRV_MAX | SRE_FAST (CSPI1_SS2) */
 DATA 4 0x73fa86a8 0x00000187
 
-#######################
-### Settings IOMUXC ###
-#######################
-
-# DDR IOMUX configuration
-# Control, Data, Address pads are in their default state: HIGH DS, FAST SR.
-# IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK MAX DS
+/*
+ * #######################
+ * ### Settings IOMUXC ###
+ * #######################
+ */
+/*
+ * DDR IOMUX configuration
+ * Control, Data, Address pads are in their default state: HIGH DS, FAST SR.
+ * IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK MAX DS
+ */
 DATA 4 0x73fa84b8 0x000000e7
-# PVTC MAX (at GPC, PGR reg)
-#DATA 4 0x73FD8004 0x1fc00000
+/* PVTC MAX (at GPC, PGR reg) */
+/* DATA 4 0x73FD8004 0x1fc00000 */
 
-#DQM0 DS high slew rate slow
+/* DQM0 DS high slew rate slow */
 DATA 4 0x73fa84d4 0x000000e4
-#DQM1 DS high slew rate slow
+/* DQM1 DS high slew rate slow */
 DATA 4 0x73fa84d8 0x000000e4
-#DQM2 DS high slew rate slow
+/* DQM2 DS high slew rate slow */
 DATA 4 0x73fa84dc 0x000000e4
-#DQM3 DS high slew rate slow
+/* DQM3 DS high slew rate slow */
 DATA 4 0x73fa84e0 0x000000e4
 
-#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 DS high & SLEW slow
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 DS high & SLEW slow */
 DATA 4 0x73fa84bc 0x000000c4
-#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 DS high & SLEW slow
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 DS high & SLEW slow */
 DATA 4 0x73fa84c0 0x000000c4
-#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 DS high & SLEW slow
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 DS high & SLEW slow */
 DATA 4 0x73fa84c4 0x000000c4
-#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 DS high & SLEW slow
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 DS high & SLEW slow */
 DATA 4 0x73fa84c8 0x000000c4
 
-#DRAM_DATA B0
+/* DRAM_DATA B0 */
 DATA 4 0x73fa88a4 0x00000004
-#DRAM_DATA B1
+/* DRAM_DATA B1 */
 DATA 4 0x73fa88ac 0x00000004
-#DRAM_DATA B2
+/* DRAM_DATA B2 */
 DATA 4 0x73fa88b8 0x00000004
-#DRAM_DATA B3
+/* DRAM_DATA B3 */
 DATA 4 0x73fa882c 0x00000004
 
-#DRAM_DATA B0 slew rate
+/* DRAM_DATA B0 slew rate */
 DATA 4 0x73fa8878 0x00000000
-#DRAM_DATA B1 slew rate
+/* DRAM_DATA B1 slew rate */
 DATA 4 0x73fa8880 0x00000000
-#DRAM_DATA B2 slew rate
+/* DRAM_DATA B2 slew rate */
 DATA 4 0x73fa888c 0x00000000
-#DRAM_DATA B3 slew rate
+/* DRAM_DATA B3 slew rate */
 DATA 4 0x73fa889c 0x00000000
 
-#######################
-### Configure SDRAM ###
-#######################
+/*
+ * #######################
+ * ### Configure SDRAM ###
+ * #######################
+ */
 
-# Configure CS0
-#######################
+/* Configure CS0 */
+/* ####################### */
 
-# ESDCTL0: Enable controller
+/* ESDCTL0: Enable controller */
 DATA 4 0x83fd9000 0x83220000
 
-# Init DRAM on CS0
-# ESDSCR: Precharge command
+/* Init DRAM on CS0 /
+/* ESDSCR: Precharge command */
 DATA 4 0x83fd9014 0x04008008
-# ESDSCR: Refresh command
+/* ESDSCR: Refresh command */
 DATA 4 0x83fd9014 0x00008010
-# ESDSCR: Refresh command
+/* ESDSCR: Refresh command */
 DATA 4 0x83fd9014 0x00008010
-# ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8)
+/* ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) */
 DATA 4 0x83fd9014 0x00338018
-# ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51)
+/* ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) */
 DATA 4 0x83fd9014 0x0020801a
-# ESDSCR
+/* ESDSCR */
 DATA 4 0x83fd9014 0x00008000
 
-# ESDSCR: EMR with full Drive strength
-#DATA 4 0x83fd9014 0x0000801a
+/* ESDSCR: EMR with full Drive strength */
+/* DATA 4 0x83fd9014 0x0000801a */
 
-# ESDCTL0: 14 ROW, 10 COL, 32Bit, SREF=8
+/* ESDCTL0: 14 ROW, 10 COL, 32Bit, SREF=8 */
 DATA 4 0x83fd9000 0xC3220000
 
-# ESDCFG0: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
-#          tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
-#DATA 4 0x83fd9004 0xC33574AA
-
-#micron mDDR
-# ESDCFG0: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
-# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
-#DATA 4 0x83FD9004 0x101564a8
-
-#hynix mDDR
-# ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
-# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+/*
+ * ESDCFG0: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
+ *          tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
+ * DATA 4 0x83fd9004 0xC33574AA
+ */
+/*
+ * micron mDDR
+ * ESDCFG0: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
+ * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+ * DATA 4 0x83FD9004 0x101564a8
+ */
+/*
+ * hynix mDDR
+ * ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
+ * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+ */
 DATA 4 0x83FD9004 0x704564a8
 
-# ESDMISC: AP=10, Bank interleaving on, MIF3 en, RALAT=2
+/* ESDMISC: AP=10, Bank interleaving on, MIF3 en, RALAT=2 */
 DATA 4 0x83fd9010 0x000a1700
 
-# Configure CS1
-#######################
+/* Configure CS1 */
+/* ####################### */
 
-# ESDCTL1: Enable controller
+/* ESDCTL1: Enable controller */
 DATA 4 0x83fd9008 0x83220000
 
-# Init DRAM on CS1
-# ESDSCR: Precharge command
+/* Init DRAM on CS1 */
+/* ESDSCR: Precharge command */
 DATA 4 0x83fd9014 0x0400800c
-# ESDSCR: Refresh command
+/* ESDSCR: Refresh command */
 DATA 4 0x83fd9014 0x00008014
-# ESDSCR: Refresh command
+/* ESDSCR: Refresh command */
 DATA 4 0x83fd9014 0x00008014
-# ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8)
+/* ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) */
 DATA 4 0x83fd9014 0x0033801c
-# ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51)
+/* ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) */
 DATA 4 0x83fd9014 0x0020801e
-# ESDSCR
+/* ESDSCR */
 DATA 4 0x83fd9014 0x00008004
 
-# ESDCTL1: 14 ROW, 10 COL, 32Bit, SREF=8
+/* ESDCTL1: 14 ROW, 10 COL, 32Bit, SREF=8 */
 DATA 4 0x83fd9008 0xC3220000
-
-# ESDCFG1: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
-#          tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
-#DATA 4 0x83fd900c 0xC33574AA
-
-#micron mDDR
-# ESDCFG1: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
-# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
-#DATA 4 0x83FD900C 0x101564a8
-
-#hynix mDDR
-# ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
-# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+/*
+ * ESDCFG1: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
+ *          tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
+ * DATA 4 0x83fd900c 0xC33574AA
+ */
+/*
+ * micron mDDR
+ * ESDCFG1: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
+ * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+ * DATA 4 0x83FD900C 0x101564a8
+ */
+/*
+ * hynix mDDR
+ * ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
+ * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+ */
 DATA 4 0x83FD900C 0x704564a8
 
-# ESDSCR (mDRAM configuration finished)
+/* ESDSCR (mDRAM configuration finished) */
 DATA 4 0x83FD9014 0x00000004
 
-# ESDSCR - clear "configuration request" bit
+/* ESDSCR - clear "configuration request" bit */
 DATA 4 0x83fd9014 0x00000000