summaryrefslogtreecommitdiff
path: root/board/uc100
diff options
context:
space:
mode:
authorJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>2008-10-16 15:01:15 +0200
committerWolfgang Denk <wd@denx.de>2008-10-18 21:54:03 +0200
commit6d0f6bcf337c5261c08fabe12982178c2c489d76 (patch)
treeae13958ffa9c6b58c2ea97aac07a4ad2f04a350f /board/uc100
parent71edc271816ec82cf0550dd6980be2da3cc2ad9e (diff)
rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Diffstat (limited to 'board/uc100')
-rw-r--r--board/uc100/pcmcia.c18
-rw-r--r--board/uc100/uc100.c22
2 files changed, 20 insertions, 20 deletions
diff --git a/board/uc100/pcmcia.c b/board/uc100/pcmcia.c
index 407bdb73c6f..ad256783ce6 100644
--- a/board/uc100/pcmcia.c
+++ b/board/uc100/pcmcia.c
@@ -24,7 +24,7 @@ static void cfg_ports (void)
{
volatile immap_t *immap;
- immap = (immap_t *)CFG_IMMR;
+ immap = (immap_t *)CONFIG_SYS_IMMR;
/*
* Configure Port A for MAX1602 PC-Card Power-Interface Switch
@@ -49,10 +49,10 @@ int pcmcia_hardware_enable(int slot)
udelay(10000);
- immap = (immap_t *)CFG_IMMR;
- sysp = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
- cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+ immap = (immap_t *)CONFIG_SYS_IMMR;
+ sysp = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
+ pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
+ cp = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
/* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
cfg_ports ();
@@ -133,8 +133,8 @@ int pcmcia_hardware_disable(int slot)
debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
- immap = (immap_t *)CFG_IMMR;
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+ immap = (immap_t *)CONFIG_SYS_IMMR;
+ pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
/* switch VCC off */
immap->im_ioport.iop_padat &= ~0x8000; /* power disable 3.3V */
@@ -163,8 +163,8 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
- immap = (immap_t *)CFG_IMMR;
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+ immap = (immap_t *)CONFIG_SYS_IMMR;
+ pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
/*
* Disable PCMCIA buffers (isolate the interface)
* and assert RESET signal
diff --git a/board/uc100/uc100.c b/board/uc100/uc100.c
index 896f9693e3d..38c7be6bad6 100644
--- a/board/uc100/uc100.c
+++ b/board/uc100/uc100.c
@@ -138,7 +138,7 @@ int board_switch(void)
{
volatile pcmconf8xx_t *pcmp;
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+ pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
return ((pcmp->pcmc_pipr >> 24) & 0xf);
}
@@ -171,7 +171,7 @@ int checkboard (void)
*/
phys_size_t initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
/*---------------------------------------------------------------------*/
@@ -187,8 +187,8 @@ phys_size_t initdram (int board_type)
/*---------------------------------------------------------------------*/
memctl->memc_mptpr = 0x0200; /* Divide by 32 WV */
- memctl->memc_mamr = CFG_MAMR_VAL & 0xFF7FFFFF; /* Bit 8 := "0" Kein Refresh WV */
- memctl->memc_mbmr = CFG_MBMR_VAL;
+ memctl->memc_mamr = CONFIG_SYS_MAMR_VAL & 0xFF7FFFFF; /* Bit 8 := "0" Kein Refresh WV */
+ memctl->memc_mbmr = CONFIG_SYS_MBMR_VAL;
/*---------------------------------------------------------------------*/
/* Initialize the Memory Controller registers, MPTPR, Chip Select 1 */
@@ -198,8 +198,8 @@ phys_size_t initdram (int board_type)
/* clock rate (16.67MHz) to allow proper operation for all ADS */
/* clock frequencies. */
/*---------------------------------------------------------------------*/
- memctl->memc_or1 = CFG_OR1_PRELIM;
- memctl->memc_br1 = CFG_BR1_PRELIM;
+ memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+ memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
/*-------------------------------------------------------------------*/
/* Wait at least 200 usec for DRAM to stabilize, this magic number */
@@ -209,8 +209,8 @@ phys_size_t initdram (int board_type)
memctl->memc_mamr = (memctl->memc_mamr | 0x04) & ~0x08;
- memctl->memc_br1 = CFG_BR1_PRELIM;
- memctl->memc_or1 = CFG_OR1_PRELIM;
+ memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
+ memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
/*---------------------------------------------------------------------*/
/* run MRS command in location 5-8 of UPMB. */
@@ -236,7 +236,7 @@ phys_size_t initdram (int board_type)
/*---------------------------------------------------------------------*/
/* rerstore MBMR value (4-beat refresh burst.) */
/*---------------------------------------------------------------------*/
- memctl->memc_mamr = CFG_MAMR_VAL | 0x00800000; /* Bit 8 := "1" Refresh Enable WV */
+ memctl->memc_mamr = CONFIG_SYS_MAMR_VAL | 0x00800000; /* Bit 8 := "1" Refresh Enable WV */
udelay(200);
@@ -251,9 +251,9 @@ int misc_init_r (void)
/*
* Make sure that RTC has clock output enabled (triggers watchdog!)
*/
- val = i2c_reg_read (CFG_I2C_RTC_ADDR, 0x0D);
+ val = i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, 0x0D);
val |= 0x80;
- i2c_reg_write (CFG_I2C_RTC_ADDR, 0x0D, val);
+ i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, 0x0D, val);
/*
* Configure PHY to setup LED's correctly and use 100MBit, FD