powerpc/8xxx: Refactor fsl_ddr_get_spd into common code from board

Move fsl_ddr_get_spd into common mpc8xxx/ddr/main.c as most boards
pretty much do the same thing.  The only variations are in how many
controllers or DIMMs per controller exist.  To make this work we
standardize on the names of the SPD_EEPROM_ADDRESS defines based on the
use case of the board.

We allow boards to override get_spd to either do board specific fixups
to the SPD data or deal with any unique behavior of how the SPD eeproms
are wired up.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

4 files changed, 4 insertions, 70 deletions

diff --git a/board/xes/xpedite517x/ddr.c b/board/xes/xpedite517x/ddr.c
index 981bf41e096..3a6e297f457 100644
--- a/board/xes/xpedite517x/ddr.c
+++ b/board/xes/xpedite517x/ddr.c
@@ -26,35 +26,12 @@
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/fsl_ddr_dimm_params.h>
 
-static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
+void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address)
 {
 	i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd,
 		sizeof(ddr2_spd_eeprom_t));
 }
 
-void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
-			unsigned int ctrl_num)
-{
-	unsigned int i;
-	unsigned int i2c_address = 0;
-
-	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
-		if (ctrl_num == 0) {
-			i2c_address = SPD_EEPROM_ADDRESS1;
-#ifdef SPD_EEPROM_ADDRESS2
-		} else if (ctrl_num == 1) {
-			i2c_address = SPD_EEPROM_ADDRESS2;
-#endif
-		} else {
-			/* An inalid ctrl number was give, use default SPD */
-			printf("ERROR: invalid DDR ctrl: %d\n", ctrl_num);
-			i2c_address = SPD_EEPROM_ADDRESS1;
-		}
-
-		get_spd(&(ctrl_dimms_spd[i]), i2c_address);
-	}
-}
-
 /*
  * There are four board-specific SDRAM timing parameters which must be
  * calculated based on the particular PCB artwork.  These are:
diff --git a/board/xes/xpedite520x/ddr.c b/board/xes/xpedite520x/ddr.c
index f8d945ace3f..3671cb8af9a 100644
--- a/board/xes/xpedite520x/ddr.c
+++ b/board/xes/xpedite520x/ddr.c
@@ -12,8 +12,7 @@
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/fsl_ddr_dimm_params.h>
 
-static void
-get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
+void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
 {
 	i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t));
 
@@ -27,20 +26,6 @@ get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
 	}
 }
 
-void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
-			unsigned int ctrl_num)
-{
-	unsigned int i;
-
-	if (ctrl_num) {
-		printf("%s: invalid ctrl_num = %d\n", __func__, ctrl_num);
-		return;
-	}
-
-	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++)
-		get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS);
-}
-
 void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,
 				unsigned int ctrl_num)
diff --git a/board/xes/xpedite537x/ddr.c b/board/xes/xpedite537x/ddr.c
index 307f875db9b..d0662b0c57d 100644
--- a/board/xes/xpedite537x/ddr.c
+++ b/board/xes/xpedite537x/ddr.c
@@ -27,27 +27,12 @@
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/fsl_ddr_dimm_params.h>
 
-static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
+void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address)
 {
 	i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd,
 		 sizeof(ddr2_spd_eeprom_t));
 }
 
-void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
-		      unsigned int ctrl_num)
-{
-	unsigned int i;
-	unsigned int i2c_address = 0;
-
-	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
-		if (ctrl_num == 0)
-			i2c_address = SPD_EEPROM_ADDRESS1;
-		if (ctrl_num == 1)
-			i2c_address = SPD_EEPROM_ADDRESS2;
-		get_spd(&(ctrl_dimms_spd[i]), i2c_address);
-	}
-}
-
 /*
  * There are four board-specific SDRAM timing parameters which must be
  * calculated based on the particular PCB artwork.  These are:
diff --git a/board/xes/xpedite550x/ddr.c b/board/xes/xpedite550x/ddr.c
index 9e6964960c3..3b6e08bfcdd 100644
--- a/board/xes/xpedite550x/ddr.c
+++ b/board/xes/xpedite550x/ddr.c
@@ -27,25 +27,12 @@
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/fsl_ddr_dimm_params.h>
 
-static void get_spd(ddr3_spd_eeprom_t *spd, unsigned char i2c_address)
+void get_spd(ddr3_spd_eeprom_t *spd, u8 i2c_address)
 {
 	i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd,
 		 sizeof(ddr3_spd_eeprom_t));
 }
 
-void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd,
-		      unsigned int ctrl_num)
-{
-	unsigned int i;
-	unsigned int i2c_address = 0;
-
-	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
-		if (ctrl_num == 0 && i == 0)
-			i2c_address = SPD_EEPROM_ADDRESS1;
-		get_spd(&(ctrl_dimms_spd[i]), i2c_address);
-	}
-}
-
 /*
  *     There are traditionally three board-specific SDRAM timing parameters
  *     which must be calculated based on the particular PCB artwork.  These are: