Update multicore CM9XX support for Integrator AP to allow booting from flash

Patch by Jean-Paul Saman, 8 Feb 2005

2 files changed, 213 insertions, 7 deletions

diff --git a/board/integratorap/integratorap.c b/board/integratorap/integratorap.c
index 31bd1d48eb..ff074ca3bc 100644
--- a/board/integratorap/integratorap.c
+++ b/board/integratorap/integratorap.c
@@ -75,6 +75,11 @@ int board_init (void)
 
 	gd->flags = 0;
 
+#ifdef CONFIG_CM_REMAP
+extern void cm_remap(void);
+	cm_remap();	/* remaps writeable memory to 0x00000000 */
+#endif
+        
 	icache_enable ();
 
 	flash__init ();
@@ -475,6 +480,38 @@ void ether__init (void)
 ******************************/
 int dram_init (void)
 {
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size  = PHYS_SDRAM_1_SIZE;
+
+#ifdef CONFIG_CM_SPD_DETECT
+	{
+extern void dram_query(void);
+	unsigned long cm_reg_sdram;
+	unsigned long sdram_shift;
+
+	dram_query();	/* Assembler accesses to CM registers */
+			/* Queries the SPD values   	      */
+
+	/* Obtain the SDRAM size from the CM SDRAM register */
+
+	cm_reg_sdram = *(volatile ulong *)(CM_BASE + OS_SDRAM);
+	/*   Register         SDRAM size
+	 *
+	 *   0xXXXXXXbbb000bb    16 MB
+	 *   0xXXXXXXbbb001bb    32 MB
+	 *   0xXXXXXXbbb010bb    64 MB
+	 *   0xXXXXXXbbb011bb   128 MB
+	 *   0xXXXXXXbbb100bb   256 MB
+         *
+	 */
+	sdram_shift              = ((cm_reg_sdram & 0x0000001C)/4)%4;
+	gd->bd->bi_dram[0].size  = 0x01000000 << sdram_shift;
+
+	}
+#endif /* CM_SPD_DETECT */
+
 	return 0;
 }
 
diff --git a/board/integratorap/platform.S b/board/integratorap/platform.S
index 897c7bbc61..fefee72f3e 100644
--- a/board/integratorap/platform.S
+++ b/board/integratorap/platform.S
@@ -14,7 +14,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -26,12 +26,6 @@
 #include <config.h>
 #include <version.h>
 
-.globl platformsetup
-platformsetup:
-
-	/* All done by Integrator's boot monitor! */
-	mov pc, lr
-
 	/* Reset using CM control register */
 .global reset_cpu
 reset_cpu:
@@ -42,3 +36,178 @@ reset_cpu:
 
 reset_failed:
 	b	reset_failed
+ 
+/* set up the platform, once the cpu has been initialized */
+.globl platformsetup
+platformsetup:
+	/* If U-Boot has been run after the ARM boot monitor
+	 * then all the necessary actions have been done
+	 * otherwise we are running from user flash mapped to 0x00000000
+	 * --- DO NOT REMAP BEFORE THE CODE HAS BEEN RELOCATED --
+	 * Changes to the (possibly soft) reset defaults of the processor
+	 * itself should be performed in cpu/arm<>/start.S
+	 * This function affects only the core module or board settings
+	 */
+ 
+#ifdef CONFIG_CM_INIT
+	/* CM has an initialization register
+	 * - bits in it are wired into test-chip pins to force
+	 *   reset defaults
+	 * - may need to change its contents for U-Boot
+	 */
+ 
+	/* set the desired CM specific value */
+	mov	r2,#CMMASK_LOWVEC	/* Vectors at 0x00000000 for all */
+ 
+#if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E)
+	orr	r2,r2,#CMMASK_INIT_102
+#else
+ 
+#if !defined (CONFIG_CM920T) && !defined (CONFIG_CM920T_ETM) && \
+     !defined (CONFIG_CM940T)
+ 
+#ifdef	CONFIG_CM_MULTIPLE_SSRAM
+	/* set simple mapping		  */
+	and	r2,r2,#CMMASK_MAP_SIMPLE
+#endif /* #ifdef CONFIG_CM_MULTIPLE_SSRAM */
+ 
+#ifdef	CONFIG_CM_TCRAM
+	/* disable TCRAM		  */
+	and	r2,r2,#CMMASK_TCRAM_DISABLE
+#endif /* #ifdef CONFIG_CM_TCRAM	  */
+ 
+#if defined (CONFIG_CM926EJ_S) || defined (CONFIG_CM1026EJ_S) || \
+	    defined (CONFIG_CM1136JF_S)
+
+	and	r2,r2,#CMMASK_LE
+ 
+#endif /* cpu with little endian initialization */
+ 
+	orr	r2,r2,#CMMASK_CMxx6_COMMON
+ 
+#endif /* CMxx6 code */
+ 
+#endif /* ARM102xxE value */
+
+	/* read CM_INIT	   */
+	mov	r0, #CM_BASE
+	ldr	r1, [r0, #OS_INIT]
+	/* check against desired bit setting */
+	and	r3,r1,r2
+	cmp	r3,r2
+	beq	init_reg_OK
+ 
+	/* lock for change */
+	mov	r3, #CMVAL_LOCK
+	and	r3,r3,#CMMASK_LOCK
+	str	r3, [r0, #OS_LOCK]
+	/* set desired value */
+	orr	r1,r1,r2
+	/* write & relock CM_INIT */
+	str	r1, [r0, #OS_INIT]
+	mov	r1, #CMVAL_UNLOCK
+	str	r1, [r0, #OS_LOCK]
+ 
+	/* soft reset so new values used */
+	b	reset_cpu
+ 
+init_reg_OK:
+ 
+#endif /* CONFIG_CM_INIT */
+ 
+	mov	pc, lr
+ 
+#ifdef	CONFIG_CM_SPD_DETECT
+	/* Fast memory is available for the DRAM data
+	 * - ensure it has been transferred, then summarize the data
+	 *   into a CM register
+	 */
+.globl dram_query
+dram_query:
+	stmfd	r13!,{r4-r6,lr}
+	/* set up SDRAM info				  */
+	/* - based on example code from the CM User Guide */
+	mov	r0, #CM_BASE
+ 
+readspdbit:
+	ldr	r1, [r0, #OS_SDRAM]	/* read the SDRAM register */
+	and	r1, r1, #0x20		/* mask SPD bit (5)	   */
+	cmp	r1, #0x20		/* test if set		   */
+	bne	readspdbit
+ 
+setupsdram:
+	add	r0, r0, #OS_SPD		/* address the copy of the SDP data */
+	ldrb	r1, [r0, #3]		/* number of row address lines	    */
+	ldrb	r2, [r0, #4]		/* number of column address lines   */
+	ldrb	r3, [r0, #5]		/* number of banks		    */
+	ldrb	r4, [r0, #31]		/* module bank density		    */
+	mul	r5, r4, r3		/* size of SDRAM (MB divided by 4)  */
+	mov	r5, r5, ASL#2		/* size in MB			    */
+	mov	r0, #CM_BASE		/* reload for later code	    */
+	cmp	r5, #0x10		/* is it 16MB?			    */
+	bne	not16
+	mov	r6, #0x2		/* store size and CAS latency of 2  */
+	b	writesize
+ 
+not16:
+	cmp	r5, #0x20		/* is it  32MB? */
+	bne	not32
+	mov	r6, #0x6
+	b	writesize
+ 
+not32:
+	cmp	r5, #0x40		/* is it  64MB? */
+	bne	not64
+	mov	r6, #0xa
+	b	writesize
+ 
+not64:
+	cmp	r5, #0x80		/* is it 128MB? */
+	bne	not128
+	mov	r6, #0xe
+	b	writesize
+ 
+not128:
+	/* if it is none of these sizes then it is either 256MB, or
+	 * there is no SDRAM fitted so default to 256MB
+	 */
+	mov	r6, #0x12
+ 
+writesize:
+	mov	r1, r1, ASL#8		/* row addr lines from SDRAM reg */
+	orr	r2, r1, r2, ASL#12	/* OR in column address lines	 */
+	orr	r3, r2, r3, ASL#16	/* OR in number of banks	 */
+	orr	r6, r6, r3		/* OR in size and CAS latency	 */
+	str	r6, [r0, #OS_SDRAM]	/* store SDRAM parameters	 */
+ 
+#endif /* #ifdef CONFIG_CM_SPD_DETECT */
+ 
+	ldmfd	r13!,{r4-r6,pc}			/* back to caller */
+
+#ifdef	CONFIG_CM_REMAP
+	/* CM remap bit is operational
+	 * - use it to map writeable memory at 0x00000000, in place of flash
+	 */
+.globl cm_remap
+cm_remap:
+	stmfd	r13!,{r4-r10,lr}
+ 
+	mov	r0, #CM_BASE
+	ldr	r1, [r0, #OS_CTRL]
+	orr	r1, r1, #CMMASK_REMAP	/* set remap and led bits */
+	str	r1, [r0, #OS_CTRL]
+ 
+	/* Now 0x00000000 is writeable, replace the vectors  */
+	ldr	r0, =_start	/* r0 <- start of vectors	    */
+	ldr	r2, =_armboot_start	/* r2 <- past vectors		    */
+	sub	r1,r1,r1		/* destination 0x00000000	    */
+ 
+copy_vec:
+	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
+	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
+	cmp	r0, r2			/* until source end address [r2]    */
+	ble	copy_vec
+ 
+	ldmfd	r13!,{r4-r10,pc}	/* back to caller		    */
+ 
+#endif /* #ifdef CONFIG_CM_REMAP */