Merge branch 'master' of /home/wd/git/u-boot/master

65 files changed, 313 insertions, 2489 deletions

diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c
index 86f86e2b185..6936e510402 100644
--- a/board/amcc/acadia/cmd_acadia.c
+++ b/board/amcc/acadia/cmd_acadia.c
@@ -44,10 +44,8 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
 	u8 *buf;
 	int cpu_freq;
 
-	if (argc < 3) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc < 3)
+		return cmd_usage(cmdtp);
 
 	cpu_freq = simple_strtol(argv[1], NULL, 10);
 	if (cpu_freq != 267) {
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
index 23874d2667d..158f7bb2728 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -34,7 +34,17 @@ extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH ch
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define CONFIG_SYS_BCSR3_PCIE		0x10
+	struct board_bcsr {
+		u8	board_id;
+		u8	cpld_rev;
+		u8	led_user;
+		u8	board_status;
+		u8	reset_ctrl;
+		u8	flash_ctrl;
+		u8	eth_ctrl;
+		u8	usb_ctrl;
+		u8	irq_ctrl;
+};
 
 #define BOARD_CANYONLANDS_PCIE	1
 #define BOARD_CANYONLANDS_SATA	2
@@ -112,6 +122,9 @@ int board_early_init_f(void)
 {
 #if !defined(CONFIG_ARCHES)
 	u32 sdr0_cust0;
+	struct board_bcsr *bcsr_data =
+		(struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
+
 #endif
 
 	/*
@@ -172,14 +185,10 @@ int board_early_init_f(void)
 
 #if !defined(CONFIG_ARCHES)
 	/* Enable ethernet and take out of reset */
-	out_8((void *)CONFIG_SYS_BCSR_BASE + 6, 0);
+	out_8(&bcsr_data->eth_ctrl, 0) ;
 
 	/* Remove NOR-FLASH, NAND-FLASH & EEPROM hardware write protection */
-	out_8((void *)CONFIG_SYS_BCSR_BASE + 5, 0);
-
-	/* Enable USB host & USB-OTG */
-	out_8((void *)CONFIG_SYS_BCSR_BASE + 7, 0);
-
+	out_8(&bcsr_data->flash_ctrl, 0) ;
 	mtsdr(SDR0_SRST1, 0);	/* Pull AHB out of reset default=1 */
 
 	/* Setup PLB4-AHB bridge based on the system address map */
@@ -201,6 +210,41 @@ int board_early_init_f(void)
 	return 0;
 }
 
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT)
+int usb_board_init(void)
+{
+	struct board_bcsr *bcsr_data =
+		(struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
+	u8 val;
+
+	/* Enable USB host & USB-OTG */
+	val = in_8(&bcsr_data->usb_ctrl);
+	val &= ~(BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST);
+	out_8(&bcsr_data->usb_ctrl, val);
+
+	return 0;
+}
+
+int usb_board_stop(void)
+{
+	struct board_bcsr *bcsr_data =
+		(struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
+	u8 val;
+
+	/* Disable USB host & USB-OTG */
+	val = in_8(&bcsr_data->usb_ctrl);
+	val |= (BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST);
+	out_8(&bcsr_data->usb_ctrl, val);
+
+	return 0;
+}
+
+int usb_board_init_fail(void)
+{
+	return usb_board_stop();
+}
+#endif /* CONFIG_USB_OHCI_NEW && CONFIG_SYS_USB_OHCI_BOARD_INIT */
+
 #if !defined(CONFIG_ARCHES)
 static void canyonlands_sata_init(int board_type)
 {
@@ -244,11 +288,13 @@ int get_cpu_num(void)
 #if !defined(CONFIG_ARCHES)
 int checkboard(void)
 {
+	struct board_bcsr *bcsr_data =
+		(struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
 	char *s = getenv("serial#");
 
 	if (pvr_460ex()) {
 		printf("Board: Canyonlands - AMCC PPC460EX Evaluation Board");
-		if (in_8((void *)(CONFIG_SYS_BCSR_BASE + 3)) & CONFIG_SYS_BCSR3_PCIE)
+		if (in_8(&bcsr_data->board_status) & BCSR_SELECT_PCIE)
 			gd->board_type = BOARD_CANYONLANDS_PCIE;
 		else
 			gd->board_type = BOARD_CANYONLANDS_SATA;
@@ -268,7 +314,7 @@ int checkboard(void)
 		break;
 	}
 
-	printf(", Rev. %X", in_8((void *)(CONFIG_SYS_BCSR_BASE + 0)));
+	printf(", Rev. %X", in_8(&bcsr_data->cpld_rev));
 
 	if (s != NULL) {
 		puts(", serial# ");
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
index c0368c0389f..c09d7308888 100644
--- a/board/amcc/luan/luan.c
+++ b/board/amcc/luan/luan.c
@@ -223,8 +223,7 @@ int do_l2cache( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] )
 			l2cache_status() ? "ON" : "OFF");
 		return 0;
 	default:
-		cmd_usage(cmdtp);
-		return 1;
+		return cmd_usage(cmdtp);
 	}
 
 	return  0;
diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c
index 3c0dc5f8969..7f75ad7deec 100644
--- a/board/amcc/makalu/cmd_pll.c
+++ b/board/amcc/makalu/cmd_pll.c
@@ -182,14 +182,14 @@ do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	char c = '\0';
 	pll_freq_t pll_freq;
-	if (argc < 2) {
-		cmd_usage(cmdtp);
-		goto ret;
-	}
 
-	for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++)
+	if (argc < 2)
+		return cmd_usage(cmdtp);
+
+	for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++) {
 		if (!strcmp(pll_name[pll_freq], argv[1]))
 			break;
+	}
 
 	switch (pll_freq) {
 	case PLL_ebc20:
@@ -223,8 +223,7 @@ do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 	default:
 		printf("Invalid options\n\n");
-		cmd_usage(cmdtp);
-		goto ret;
+		return cmd_usage(cmdtp);
 	}
 
 	printf("PLL set to %s, "
diff --git a/board/amcc/taihu/lcd.c b/board/amcc/taihu/lcd.c
index 595dee3fcc4..9b2afdabca5 100644
--- a/board/amcc/taihu/lcd.c
+++ b/board/amcc/taihu/lcd.c
@@ -139,10 +139,9 @@ static int do_lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char * const arg
 
 static int do_lcd_puts (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 {
-	if (argc < 2) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc < 2)
+		return cmd_usage(cmdtp);
+
 	lcd_puts(argv[1]);
 
 	return 0;
@@ -150,10 +149,9 @@ static int do_lcd_puts (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv
 
 static int do_lcd_putc (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 {
-	if (argc < 2) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc < 2)
+		return cmd_usage(cmdtp);
+
 	lcd_putc((char)argv[1][0]);
 
 	return 0;
@@ -165,10 +163,8 @@ static int do_lcd_cur (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[
 	ulong dir;
 	char cur_addr;
 
-	if (argc < 3) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc < 3)
+		return cmd_usage(cmdtp);
 
 	count = simple_strtoul(argv[1], NULL, 16);
 	if (count > 31) {
diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c
index 1682cf7c6ad..dd2aba546c1 100644
--- a/board/amcc/taihu/taihu.c
+++ b/board/amcc/taihu/taihu.c
@@ -101,16 +101,12 @@ static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char * const argv[
 {
 	int led_no;
 
-	if (argc != 3) {
-		cmd_usage(cmd_tp);
-		return -1;
-	}
+	if (argc != 3)
+		return cmd_usage(cmd_tp);
 
 	led_no = simple_strtoul(argv[1], NULL, 16);
-	if (led_no != 1 && led_no != 2) {
-		cmd_usage(cmd_tp);
-		return -1;
-	}
+	if (led_no != 1 && led_no != 2)
+		return cmd_usage(cmd_tp);
 
 	if (strcmp(argv[2],"off") == 0x0) {
 		if (led_no == 1)
@@ -123,8 +119,7 @@ static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char * const argv[
 		else
 			gpio_write_bit(31, 0);
 	} else {
-		cmd_usage(cmd_tp);
-		return -1;
+		return cmd_usage(cmd_tp);
 	}
 
 	return 0;
diff --git a/board/amcc/taishan/lcd.c b/board/amcc/taishan/lcd.c
index 6a049dfbadc..7f7730a81d1 100644
--- a/board/amcc/taishan/lcd.c
+++ b/board/amcc/taishan/lcd.c
@@ -166,19 +166,17 @@ static int do_lcd_clear(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv
 }
 static int do_lcd_puts(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 {
-	if (argc < 2) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc < 2)
+		return cmd_usage(cmdtp);
+
 	lcd_puts(argv[1]);
 	return 0;
 }
 static int do_lcd_putc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 {
-	if (argc < 2) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc < 2)
+		return cmd_usage(cmdtp);
+
 	lcd_putc((char)argv[1][0]);
 	return 0;
 }
@@ -188,10 +186,8 @@ static int do_lcd_cur(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]
 	ulong dir;
 	char cur_addr;
 
-	if (argc < 3) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc < 3)
+		return cmd_usage(cmdtp);
 
 	count = simple_strtoul(argv[1], NULL, 16);
 	if (count > 31) {
diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c
index cde13e424b5..e9cd333f3a5 100644
--- a/board/amcc/yucca/cmd_yucca.c
+++ b/board/amcc/yucca/cmd_yucca.c
@@ -58,10 +58,8 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
 	char plbClock[4];
 	char pcixClock[4];
 
-	if (argc < 3) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc < 3)
+		return cmd_usage(cmdtp);
 
 	if (strcmp(argv[2], "prom0") == 0)
 		chip = IIC0_BOOTPROM_ADDR;
diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c
index 4f7d935df3d..671f9e98536 100644
--- a/board/atum8548/atum8548.c
+++ b/board/atum8548/atum8548.c
@@ -292,14 +292,6 @@ void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
 
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCI2
-	ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
-#endif
+	FT_FSL_PCI_SETUP;
 }
 #endif
diff --git a/board/barco/barco.c b/board/barco/barco.c
index b8d968b9153..6ce3480782b 100644
--- a/board/barco/barco.c
+++ b/board/barco/barco.c
@@ -290,12 +290,6 @@ void barcobcd_boot (void)
 
 int barcobcd_boot_image (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-#if 0
-	if (argc > 1) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
-#endif
 	barcobcd_boot ();
 
 	return 0;
diff --git a/board/digsy_mtc/cmd_mtc.c b/board/digsy_mtc/cmd_mtc.c
index 621980dfce7..ba0c36770e1 100644
--- a/board/digsy_mtc/cmd_mtc.c
+++ b/board/digsy_mtc/cmd_mtc.c
@@ -75,10 +75,8 @@ static int do_mtc_led(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	int err;
 	int i;
 
-	if (argc < 2) {
-		cmd_usage(cmdtp);
-		return -1;
-	}
+	if (argc < 2)
+		return cmd_usage(cmdtp);
 
 	memset(&pcmd, 0, sizeof(pcmd));
 	memset(&prx, 0, sizeof(prx));
@@ -149,10 +147,8 @@ static int do_mtc_digout(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
 	int err;
 	uchar channel_mask = 0;
 
-	if (argc < 3) {
-		cmd_usage(cmdtp);
-		return -1;
-	}
+	if (argc < 3)
+		return cmd_usage(cmdtp);
 
 	if (strncmp(argv[1], "on", 2) == 0)
 		channel_mask |= 1;
@@ -178,10 +174,8 @@ static int do_mtc_digin(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
 	int err;
 	uchar channel_num = 0;
 
-	if (argc < 2) {
-		cmd_usage(cmdtp);
-		return -1;
-	}
+	if (argc < 2)
+		return cmd_usage(cmdtp);
 
 	channel_num = simple_strtol(argv[1], NULL, 10);
 	if ((channel_num != 1) && (channel_num != 2)) {
@@ -332,8 +326,7 @@ int cmd_mtc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		return c->cmd(c, flag, argc, argv);
 	} else {
 		/* Unrecognized command */
-		cmd_usage(cmdtp);
-		return 1;
+		return cmd_usage(cmdtp);
 	}
 
 	return err;
diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c
index 9109b64a1ce..3dfbf3bc913 100644
--- a/board/esd/common/lcd.c
+++ b/board/esd/common/lcd.c
@@ -345,10 +345,8 @@ int do_esdbmp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #ifdef CONFIG_VIDEO_SM501
 	char *str;
 #endif
-	if (argc != 2) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc != 2)
+		return cmd_usage(cmdtp);
 
 	addr = simple_strtoul(argv[1], NULL, 16);
 
diff --git a/board/esd/dasa_sim/cmd_dasa_sim.c b/board/esd/dasa_sim/cmd_dasa_sim.c
index aa7437695eb..4946538f4bb 100644
--- a/board/esd/dasa_sim/cmd_dasa_sim.c
+++ b/board/esd/dasa_sim/cmd_dasa_sim.c
@@ -221,9 +221,7 @@ int do_pci9054 (cmd_tbl_t * cmdtp, int flag, int argc,
 		return 0;
 	}
 
-	cmd_usage(cmdtp);
-	return 1;
-
+	return cmd_usage(cmdtp);
 }
 
 U_BOOT_CMD(
diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c
index 5a8f4f5810a..3929ad0aac3 100644
--- a/board/freescale/common/sys_eeprom.c
+++ b/board/freescale/common/sys_eeprom.c
@@ -351,8 +351,7 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			prog_eeprom();
 			break;
 		default:
-			cmd_usage(cmdtp);
-			break;
+			return cmd_usage(cmdtp);
 		}
 
 		return 0;
@@ -388,8 +387,7 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		break;
 	case 'h':	/* help */
 	default:
-		cmd_usage(cmdtp);
-		break;
+		return cmd_usage(cmdtp);
 	}
 
 	return 0;
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index 50ca3cae9fc..c8e08563b6a 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -396,26 +396,8 @@ void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
 
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#else
-	ft_fsl_pci_setup(blob, "pci0", NULL);
-#endif
-#ifdef CONFIG_PCIE2
-	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
-#else
-	ft_fsl_pci_setup(blob, "pci1", NULL);
-#endif
-#ifdef CONFIG_PCIE2
-	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
-#else
-	ft_fsl_pci_setup(blob, "pci2", NULL);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci3", &pcie3_hose);
-#else
-	ft_fsl_pci_setup(blob, "pci3", NULL);
-#endif
+	FT_FSL_PCI_SETUP;
+
 #ifdef CONFIG_FSL_SGMII_RISER
 	fsl_sgmii_riser_fdt_fixup(blob);
 #endif
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index 581d5f26edb..da3a2b6eecd 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007,2009 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009-2010 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -360,19 +360,8 @@ void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
 
+	FT_FSL_PCI_SETUP;
 
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE2
-	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci2", &pcie3_hose);
-#endif
-#ifdef CONFIG_PCIE3
-	ft_fsl_pci_setup(blob, "pci3", &pcie2_hose);
-#endif
 #ifdef CONFIG_FSL_SGMII_RISER
 	fsl_sgmii_riser_fdt_fixup(blob);
 #endif
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index f0169959af4..23e552bde77 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004, 2007, 200 Freescale Semiconductor, Inc.
+ * Copyright 2004, 2007, 2009-2010 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
  *
@@ -388,11 +388,6 @@ int last_stage_init(void)
 #if defined(CONFIG_OF_BOARD_SETUP)
 void ft_pci_setup(void *blob, bd_t *bd)
 {
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
-#endif
+	FT_FSL_PCI_SETUP;
 }
 #endif
diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index 036bf9528b7..bd859e4ee4b 100644
--- a/board/freescale/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007,2009 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009-2010 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
  *
@@ -426,11 +426,6 @@ void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
 
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
-#endif
+	FT_FSL_PCI_SETUP;
 }
 #endif
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index 81e8ff51e9f..01b7dcb70cb 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009 Freescale Semiconductor.
+ * Copyright 2009-2010 Freescale Semiconductor.
  *
  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
  *
@@ -635,9 +635,8 @@ void ft_board_setup(void *blob, bd_t *bd)
 #endif
 	ft_cpu_setup(blob, bd);
 
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
-#endif
+	FT_FSL_PCI_SETUP;
+
 	fdt_board_fixup_esdhc(blob, bd);
 	fdt_board_fixup_qe_uart(blob, bd);
 	fdt_board_fixup_qe_usb(blob, bd);
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index 81d481a1719..6b96dfc1658 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -345,15 +345,8 @@ void ft_board_setup(void *blob, bd_t *bd)
 
 	fdt_fixup_memory(blob, (u64)base, (u64)size);
 
-#ifdef CONFIG_PCIE3
-	ft_fsl_pci_setup(blob, "pci0", &pcie3_hose);
-#endif
-#ifdef CONFIG_PCIE2
-	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
-#endif
+	FT_FSL_PCI_SETUP;
+
 #ifdef CONFIG_FSL_SGMII_RISER
 	fsl_sgmii_riser_fdt_fixup(blob);
 #endif
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
index 2ef7b2323da..6578f58dbfe 100644
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007,2009 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009-2010 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -309,15 +309,7 @@ ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
 
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
-#endif
-#ifdef CONFIG_PCIE2
-	ft_fsl_pci_setup(blob, "pci2", &pcie2_hose);
-#endif
+	FT_FSL_PCI_SETUP;
 }
 #endif
 
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
index 0b7f787e5d4..781a7c87454 100644
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
@@ -115,10 +115,8 @@ int mpc8610diu_init_show_bmp(cmd_tbl_t *cmdtp,
 {
 	unsigned int addr;
 
-	if (argc < 2) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc < 2)
+		return cmd_usage(cmdtp);
 
 	if (!strncmp(argv[1],"init",4)) {
 #if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
diff --git a/board/freescale/mpc8641hpcn/law.c b/board/freescale/mpc8641hpcn/law.c
index bd357b86670..8c8ce9585a3 100644
--- a/board/freescale/mpc8641hpcn/law.c
+++ b/board/freescale/mpc8641hpcn/law.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008 Freescale Semiconductor, Inc.
+ * Copyright 2008,2010 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -32,14 +32,14 @@
  *
  * 0x0000_0000     0x7fff_ffff     DDR                     2G
  * if PCI (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT)
- * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
- * 0xa000_0000     0xbfff_ffff     PCI2 MEM                512M
+ * 0x8000_0000     0x9fff_ffff     PCIE1 MEM                512M
+ * 0xa000_0000     0xbfff_ffff     PCIE2 MEM                512M
  * else if RIO (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT)
  * 0x8000_0000     0x9fff_ffff     RapidIO                 512M
  * endif
  * (prepend 0xf_0000_0000 if CONFIG_PHYS_64BIT)
- * 0xffc0_0000     0xffc0_ffff     PCI1 IO                 64K
- * 0xffc1_0000     0xffc1_ffff     PCI2 IO                 64K
+ * 0xffc0_0000     0xffc0_ffff     PCIE1 IO                 64K
+ * 0xffc1_0000     0xffc1_ffff     PCIE2 IO                 64K
  * 0xffe0_0000     0xffef_ffff     CCSRBAR                 1M
  * 0xffdf_0000     0xffe0_0000     PIXIS, CF               64K
  * 0xef80_0000     0xefff_ffff     FLASH (boot bank)       8M
@@ -54,10 +54,10 @@ struct law_entry law_table[] = {
 	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
 #endif
 #ifdef CONFIG_PCI
-	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2),
 #elif defined(CONFIG_RIO)
 	SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
 #endif
diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index b352c334cf8..d86ca12aaf1 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2006, 2007 Freescale Semiconductor.
+ * Copyright 2006, 2007, 2010 Freescale Semiconductor.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -129,21 +129,21 @@ fixed_sdram(void)
 
 
 #if defined(CONFIG_PCI)
-static struct pci_controller pci1_hose;
+static struct pci_controller pcie1_hose;
 #endif /* CONFIG_PCI */
 
-#ifdef CONFIG_PCI2
-static struct pci_controller pci2_hose;
-#endif	/* CONFIG_PCI2 */
+#ifdef CONFIG_PCIE2
+static struct pci_controller pcie2_hose;
+#endif	/* CONFIG_PCIE2 */
 
 int first_free_busno = 0;
 
 void pci_init_board(void)
 {
-#ifdef CONFIG_PCI1
+#ifdef CONFIG_PCIE1
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
-	struct pci_controller *hose = &pci1_hose;
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
+	struct pci_controller *hose = &pcie1_hose;
 	struct pci_region *r = hose->regions;
 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
@@ -169,16 +169,16 @@ void pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_MEM_BUS,
-			       CONFIG_SYS_PCI1_MEM_PHYS,
-			       CONFIG_SYS_PCI1_MEM_SIZE,
+			       CONFIG_SYS_PCIE1_MEM_BUS,
+			       CONFIG_SYS_PCIE1_MEM_PHYS,
+			       CONFIG_SYS_PCIE1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_IO_BUS,
-			       CONFIG_SYS_PCI1_IO_PHYS,
-			       CONFIG_SYS_PCI1_IO_SIZE,
+			       CONFIG_SYS_PCIE1_IO_BUS,
+			       CONFIG_SYS_PCIE1_IO_PHYS,
+			       CONFIG_SYS_PCIE1_IO_SIZE,
 			       PCI_REGION_IO);
 
 		hose->region_count = r - hose->regions;
@@ -195,8 +195,8 @@ void pci_init_board(void)
 		 * Activate ULI1575 legacy chip by performing a fake
 		 * memory access.  Needed to make ULI RTC work.
 		 */
-		in_be32((unsigned *) ((char *)(CONFIG_SYS_PCI1_MEM_VIRT
-				       + CONFIG_SYS_PCI1_MEM_SIZE - 0x1000000)));
+		in_be32((unsigned *) ((char *)(CONFIG_SYS_PCIE1_MEM_VIRT
+				       + CONFIG_SYS_PCIE1_MEM_SIZE - 0x1000000)));
 
 	} else {
 		puts("PCI-EXPRESS 1: Disabled\n");
@@ -204,26 +204,26 @@ void pci_init_board(void)
 }
 #else
 	puts("PCI-EXPRESS1: Disabled\n");
-#endif /* CONFIG_PCI1 */
+#endif /* CONFIG_PCIE1 */
 
-#ifdef CONFIG_PCI2
+#ifdef CONFIG_PCIE2
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR;
-	struct pci_controller *hose = &pci2_hose;
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
+	struct pci_controller *hose = &pcie2_hose;
 	struct pci_region *r = hose->regions;
 
 	/* outbound memory */
 	pci_set_region(r++,
-		       CONFIG_SYS_PCI2_MEM_BUS,
-		       CONFIG_SYS_PCI2_MEM_PHYS,
-		       CONFIG_SYS_PCI2_MEM_SIZE,
+		       CONFIG_SYS_PCIE2_MEM_BUS,
+		       CONFIG_SYS_PCIE2_MEM_PHYS,
+		       CONFIG_SYS_PCIE2_MEM_SIZE,
 		       PCI_REGION_MEM);
 
 	/* outbound io */
 	pci_set_region(r++,
-		       CONFIG_SYS_PCI2_IO_BUS,
-		       CONFIG_SYS_PCI2_IO_PHYS,
-		       CONFIG_SYS_PCI2_IO_SIZE,
+		       CONFIG_SYS_PCIE2_IO_BUS,
+		       CONFIG_SYS_PCIE2_IO_PHYS,
+		       CONFIG_SYS_PCIE2_IO_SIZE,
 		       PCI_REGION_IO);
 
 	hose->region_count = r - hose->regions;
@@ -238,7 +238,7 @@ void pci_init_board(void)
 }
 #else
 	puts("PCI-EXPRESS 2: Disabled\n");
-#endif /* CONFIG_PCI2 */
+#endif /* CONFIG_PCIE2 */
 
 }
 
@@ -253,12 +253,7 @@ ft_board_setup(void *blob, bd_t *bd)
 
 	ft_cpu_setup(blob, bd);
 
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCI2
-	ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
-#endif
+	FT_FSL_PCI_SETUP;
 
 	/*
 	 * Warn if it looks like the device tree doesn't match u-boot.
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
index be692cb4584..5cdee9ff70f 100644
--- a/board/freescale/p1022ds/p1022ds.c
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -322,23 +322,7 @@ void ft_board_setup(void *blob, bd_t *bd)
 
 	fdt_fixup_memory(blob, (u64)base, (u64)size);
 
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci0", &pcie1_hose);
-#else
-	ft_fsl_pci_setup(blob, "pci0", NULL);
-#endif
-
-#ifdef CONFIG_PCIE2
-	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
-#else
-	ft_fsl_pci_setup(blob, "pci1", NULL);
-#endif
-
-#ifdef CONFIG_PCIE3
-	ft_fsl_pci_setup(blob, "pci2", &pcie3_hose);
-#else
-	ft_fsl_pci_setup(blob, "pci2", NULL);
-#endif
+	FT_FSL_PCI_SETUP;
 
 #ifdef CONFIG_FSL_SGMII_RISER
 	fsl_sgmii_riser_fdt_fixup(blob);
diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c
index aa2f64ca910..97d4f834b08 100644
--- a/board/freescale/p1_p2_rdb/pci.c
+++ b/board/freescale/p1_p2_rdb/pci.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -100,16 +100,5 @@ void pci_init_board(void)
 
 void ft_pci_board_setup(void *blob)
 {
-/* According to h/w manual, PCIE2 is at lower address(0x9000)
- * than PCIE1(0xa000).
- * Hence PCIE2 is made to occupy the pci1 position in dts to
- * keep the addresses sorted there.
- * Generally the case with all FSL SOCs.
- */
-#ifdef CONFIG_PCIE2
-	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
-#endif
+	FT_FSL_PCI_SETUP;
 }
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index be4b2eb478b..3fd1b347abb 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright 2007-2010 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -366,15 +366,8 @@ void ft_board_setup(void *blob, bd_t *bd)
 
 	fdt_fixup_memory(blob, (u64)base, (u64)size);
 
-#ifdef CONFIG_PCIE3
-	ft_fsl_pci_setup(blob, "pci0", &pcie3_hose);
-#endif
-#ifdef CONFIG_PCIE2
-	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
-#endif
+	FT_FSL_PCI_SETUP;
+
 #ifdef CONFIG_FSL_SGMII_RISER
 	fsl_sgmii_riser_fdt_fixup(blob);
 #endif
diff --git a/board/gth/Makefile b/board/gth/Makefile
deleted file mode 100644
index 4b5c528a048..00000000000
--- a/board/gth/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o flash.o ee_access.o pcmcia.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/gth/README b/board/gth/README
deleted file mode 100644
index 241c70b69bf..00000000000
--- a/board/gth/README
+++ /dev/null
@@ -1,18 +0,0 @@
-Written by Thomas.Lange@corelatus.com 010805
-
-To make a system for gth that actually works ;-)
-the variable TBASE needs to be set to 0,1 or 2
-depending on location where image is supposed to
-be started from.
-E.g. make TBASE=1
-
-0: Start from RAM, base 0
-
-1: Start from flash_base + 0x10070
-
-2: Start from flash_base + 0x30070
-
-When using 1 or 2, the image is supposed to be launched
-from miniboot that boots the first U-Boot image found in
-flash.
-For miniboot code, description, see www.opensource.se
diff --git a/board/gth/config.mk b/board/gth/config.mk
deleted file mode 100644
index 3c80156c3f2..00000000000
--- a/board/gth/config.mk
+++ /dev/null
@@ -1,40 +0,0 @@
-#
-# (C) Copyright 2000, 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-ifeq ($(TBASE),0)
-TEXT_BASE = 0
-else
-ifeq ($(TBASE),1)
-TEXT_BASE = 0x80010070
-else
-ifeq ($(TBASE),2)
-TEXT_BASE = 0x80030070
-else
-## Only to make ordinary make work
-TEXT_BASE = 0x90000000
-endif
-endif
-endif
-
-OBJCFLAGS =	--set-section-flags=.ppcenv=contents,alloc,load,data
diff --git a/board/gth/ee_access.c b/board/gth/ee_access.c
deleted file mode 100644
index 2a33a0edd99..00000000000
--- a/board/gth/ee_access.c
+++ /dev/null
@@ -1,335 +0,0 @@
-/* Module for handling DALLAS DS2438, smart battery monitor
-   Chip can store up to 40 bytes of user data in EEPROM,
-   perform temp, voltage and current measurements.
-   Chip also contains a unique serial number.
-
-   Always read/write LSb first
-
-   For documentaion, see data sheet for DS2438, 2438.pdf
-
-   By Thomas.Lange@corelatus.com 001025 */
-
-#include <common.h>
-#include <config.h>
-#include <mpc8xx.h>
-
-#include <../board/gth/ee_dev.h>
-
-/* We dont have kernel functions */
-#define printk printf
-#define KERN_DEBUG
-#define KERN_ERR
-#define EIO 1
-
-static int Debug = 0;
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-/*
- * lookup table ripped from DS app note 17, understanding and using
- * cyclic redundancy checks...
- */
-
-static u8 crc_lookup[256] = {
-	0,	94,	188,	226,	97,	63,	221,	131,
-	194,	156,	126,	32,	163,	253,	31,	65,
-	157,	195,	33,	127,	252,	162,	64,	30,
-	95,	1,	227,	189,	62,	96,	130,	220,
-	35,	125,	159,	193,	66,	28,	254,	160,
-	225,	191,	93,	3,	128,	222,	60,	98,
-	190,	224,	2,	92,	223,	129,	99,	61,
-	124,	34,	192,	158,	29,	67,	161,	255,
-	70,	24,	250,	164,	39,	121,	155,	197,
-	132,	218,	56,	102,	229,	187,	89,	7,
-	219,	133,	103,	57,	186,	228,	6,	88,
-	25,	71,	165,	251,	120,	38,	196,	154,
-	101,	59,	217,	135,	4,	90,	184,	230,
-	167,	249,	27,	69,	198,	152,	122,	36,
-	248,	166,	68,	26,	153,	199,	37,	123,
-	58,	100,	134,	216,	91,	5,	231,	185,
-	140,	210,	48,	110,	237,	179,	81,	15,
-	78,	16,	242,	172,	47,	113,	147,	205,
-	17,	79,	173,	243,	112,	46,	204,	146,
-	211,	141,	111,	49,	178,	236,	14,	80,
-	175,	241,	19,	77,	206,	144,	114,	44,
-	109,	51,	209,	143,	12,	82,	176,	238,
-	50,	108,	142,	208,	83,	13,	239,	177,
-	240,	174,	76,	18,	145,	207,	45,	115,
-	202,	148,	118,	40,	171,	245,	23,	73,
-	8,	86,	180,	234,	105,	55,	213,	139,
-	87,	9,	235,	181,	54,	104,	138,	212,
-	149,	203,	41,	119,	244,	170,	72,	22,
-	233,	183,	85,	11,	136,	214,	52,	106,
-	43,	117,	151,	201,	74,	20,	246,	168,
-	116,	42,	200,	150,	21,	75,	169,	247,
-	182,	232,	10,	84,	215,	137,	107,	53
-};
-
-static u8 make_new_crc( u8 Old_crc, u8 New_value ){
-  /* Compute a new checksum with new byte, using previous checksum as input
-     See DS app note 17, understanding and using cyclic redundancy checks...
-     Also see DS2438, page 11 */
-  return( crc_lookup[Old_crc ^ New_value ]);
-}
-
-int ee_crc_ok( u8 *Buffer, int Len, u8 Crc ){
-  /* Check if the checksum for this buffer is correct */
-  u8 Curr_crc=0;
-  int i;
-  u8 *Curr_byte = Buffer;
-
-  for(i=0;i<Len;i++){
-    Curr_crc = make_new_crc( Curr_crc, *Curr_byte);
-    Curr_byte++;
-  }
-  E_DEBUG("Calculated CRC = 0x%x, read = 0x%x\n", Curr_crc, Crc);
-
-  if(Curr_crc == Crc){
-    /* Good */
-    return(TRUE);
-  }
-  printk(KERN_ERR"EE checksum error, Calculated CRC = 0x%x, read = 0x%x\n",
-	Curr_crc, Crc);
-  return(FALSE);
-}
-
-static void
-set_idle(void){
-  /* Send idle and keep start time
-     Continous 1 is idle */
-  WRITE_PORT(1);
-}
-
-static int
-do_reset(void){
-  /* Release reset and verify that chip responds with presence pulse */
-  int Retries = 0;
-  while(Retries<5){
-    udelay(RESET_LOW_TIME);
-
-    /* Send reset */
-    WRITE_PORT(0);
-    udelay(RESET_LOW_TIME);
-
-    /* Release reset */
-    WRITE_PORT(1);
-
-    /* Wait for EEPROM to drive output */
-    udelay(PRESENCE_TIMEOUT);
-    if(!READ_PORT){
-      /* Ok, EEPROM is driving a 0 */
-      E_DEBUG("Presence detected\n");
-      if(Retries){
-	E_DEBUG("Retries %d\n",Retries);
-      }
-      /* Make sure chip releases pin */
-      udelay(PRESENCE_LOW_TIME);
-      return 0;
-    }
-    Retries++;
-  }
-
-  printk(KERN_ERR"EEPROM did not respond when releasing reset\n");
-
-    /* Make sure chip releases pin */
-  udelay(PRESENCE_LOW_TIME);
-
-  /* Set to idle again */
-  set_idle();
-
-  return(-EIO);
-}
-
-static u8
-read_byte(void){
-  /* Read a single byte from EEPROM
-     Read LSb first */
-  int i;
-  int Value;
-  u8 Result=0;
-#ifndef CONFIG_SYS_IMMR
-  u32 Flags;
-#endif
-
-  E_DEBUG("Reading byte\n");
-
-  for(i=0;i<8;i++){
-    /* Small delay between pulses */
-    udelay(1);
-
-#ifndef CONFIG_SYS_IMMR
-    /* Disable irq */
-    save_flags(Flags);
-    cli();
-#endif
-
-    /* Pull down pin short time to start read
-       See page 26 in data sheet */
-
-    WRITE_PORT(0);
-    udelay(READ_LOW);
-    WRITE_PORT(1);
-
-    /* Wait for chip to drive pin */
-    udelay(READ_TIMEOUT);
-
-    Value = READ_PORT;
-    if(Value)
-      Value=1;
-
-#ifndef CONFIG_SYS_IMMR
-    /* Enable irq */
-    restore_flags(Flags);
-#endif
-
-    /* Wait for chip to release pin */
-    udelay(TOTAL_READ_LOW-READ_TIMEOUT);
-
-    /* LSb first */
-    Result|=Value<<i;
-  }
-
-  E_DEBUG("Read byte 0x%x\n",Result);
-
-  return(Result);
-}
-
-static void
-write_byte(u8 Byte){
-  /* Write a single byte to EEPROM
-     Write LSb first */
-  int i;
-  int Value;
-#ifndef CONFIG_SYS_IMMR
-  u32 Flags;
-#endif
-
-  E_DEBUG("Writing byte 0x%x\n",Byte);
-
-  for(i=0;i<8;i++){
-    /* Small delay between pulses */
-    udelay(1);
-    Value = Byte&1;
-
-#ifndef CONFIG_SYS_IMMR
-    /* Disable irq */
-    save_flags(Flags);
-    cli();
-#endif
-
-    /* Pull down pin short time for a 1, long time for a 0
-       See page 26 in data sheet */
-
-    WRITE_PORT(0);
-    if(Value){
-      /* Write a 1 */
-      udelay(WRITE_1_LOW);
-    }
-    else{
-      /* Write a 0 */
-      udelay(WRITE_0_LOW);
-    }
-
-    WRITE_PORT(1);
-
-#ifndef CONFIG_SYS_IMMR
-    /* Enable irq */
-    restore_flags(Flags);
-#endif
-
-    if(Value)
-      /* Wait for chip to read the 1 */
-      udelay(TOTAL_WRITE_LOW-WRITE_1_LOW);
-    Byte>>=1;
-  }
-}
-
-int ee_do_command( u8 *Tx, int Tx_len, u8 *Rx, int Rx_len, int Send_skip ){
-  /* Execute this command string, including
-     giving reset and setting to idle after command
-     if Rx_len is set, we read out data from EEPROM */
-  int i;
-
-  E_DEBUG("Command, Tx_len %d, Rx_len %d\n", Tx_len, Rx_len );
-
-  if(do_reset()){
-    /* Failed! */
-    return(-EIO);
-  }
-
-  if(Send_skip)
-    /* Always send SKIP_ROM first to tell chip we are sending a command,
-       except when we read out rom data for chip */
-    write_byte(SKIP_ROM);
-
-  /* Always have Tx data */
-  for(i=0;i<Tx_len;i++){
-    write_byte(Tx[i]);
-  }
-
-  if(Rx_len){
-    for(i=0;i<Rx_len;i++){
-      Rx[i]=read_byte();
-    }
-  }
-
-  set_idle();
-
-  E_DEBUG("Command done\n");
-
-  return(0);
-}
-
-int ee_init_data(void){
-  int i;
-  u8 Tx[10];
-  int tmp;
-  volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-
-  while(0){
-    tmp = 1-tmp;
-    if(tmp)
-      immap->im_ioport.iop_padat &= ~PA_FRONT_LED;
-    else
-      immap->im_ioport.iop_padat |= PA_FRONT_LED;
-    udelay(1);
-  }
-
-  /* Set port to open drain to be able to read data from
-     port without setting it to input */
-  PORT_B_PAR &= ~PB_EEPROM;
-  PORT_B_ODR |= PB_EEPROM;
-  SET_PORT_B_OUTPUT(PB_EEPROM);
-
-  /* Set idle mode */
-  set_idle();
-
-  /* Copy all User EEPROM data to scratchpad */
-  for(i=0;i<USER_PAGES;i++){
-    Tx[0]=RECALL_MEMORY;
-    Tx[1]=EE_USER_PAGE_0+i;
-    if(ee_do_command(Tx,2,NULL,0,TRUE)) return(-EIO);
-  }
-
-  /* Make sure chip doesnt store measurements in NVRAM */
-  Tx[0]=WRITE_SCRATCHPAD;
-  Tx[1]=0; /* Page */
-  Tx[2]=9;
-  if(ee_do_command(Tx,3,NULL,0,TRUE)) return(-EIO);
-
-  Tx[0]=COPY_SCRATCHPAD;
-  if(ee_do_command(Tx,2,NULL,0,TRUE)) return(-EIO);
-
-  /* FIXME check status bit instead
-     Could take 10 ms to store in EEPROM */
-  for(i=0;i<10;i++){
-    udelay(1000);
-  }
-
-  return(0);
-}
diff --git a/board/gth/ee_access.h b/board/gth/ee_access.h
deleted file mode 100644
index e847f2c58b6..00000000000
--- a/board/gth/ee_access.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* By Thomas.Lange@Corelatus.com 001025
-
-   Definitions for EEPROM/VOLT METER  DS2438 */
-
-#ifndef INCeeaccessh
-#define INCeeaccessh
-
-int ee_do_command( u8 *Tx, int Tx_len, u8 *Rx, int Rx_len, int Send_skip );
-int ee_init_data(void);
-int ee_crc_ok( u8 *Buffer, int Len, u8 Crc );
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#endif /* INCeeaccessh */
diff --git a/board/gth/ee_dev.h b/board/gth/ee_dev.h
deleted file mode 100644
index 3004b46610c..00000000000
--- a/board/gth/ee_dev.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/* By Thomas.Lange@Corelatus.com 001025
-   $Revision: 1.6 $
-
-   Definitions for EEPROM/VOLT METER  DS2438
-   Copyright (C) 2000-2001 Corelatus AB */
-
-#ifndef INCeedevh
-#define INCeedevh
-
-#define E_DEBUG(fmt,args...) if( Debug ) printk(KERN_DEBUG"EE: " fmt, ##args)
-
-#define PORT_B_PAR ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar
-#define PORT_B_ODR ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr
-#define PORT_B_DIR ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir
-#define PORT_B_DAT ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat
-
-#define SET_PORT_B_INPUT(Mask)  PORT_B_DIR &= ~(Mask)
-#define SET_PORT_B_OUTPUT(Mask) PORT_B_DIR |= Mask
-
-#define WRITE_PORT_B(Mask,Value) { \
-			if (Value) PORT_B_DAT |= Mask; \
-			else PORT_B_DAT &= ~(Mask); \
-		}
-#define WRITE_PORT(Value) WRITE_PORT_B(PB_EEPROM,Value)
-
-#define READ_PORT (PORT_B_DAT&PB_EEPROM)
-
-/* 64 bytes chip */
-#define EE_CHIP_SIZE 64
-
-/* We use this resistor for measuring the current drain on 3.3V */
-#define CURRENT_RESISTOR 0.022
-
-/* microsecs
-   Pull line down at least this long for reset pulse */
-#define RESET_LOW_TIME    490
-
-/* Read presence pulse after we release reset pulse */
-#define PRESENCE_TIMEOUT  100
-#define PRESENCE_LOW_TIME 200
-
-#define WRITE_0_LOW 80
-#define WRITE_1_LOW 2
-#define TOTAL_WRITE_LOW 80
-
-#define READ_LOW        2
-#define READ_TIMEOUT   10
-#define TOTAL_READ_LOW 80
-
-/*** Rom function commands ***/
-#define READ_ROM   0x33
-#define MATCH_ROM  0x55
-#define SKIP_ROM   0xCC
-#define SEARCH_ROM 0xF0
-
-
-/*** Memory_command_function ***/
-#define WRITE_SCRATCHPAD 0x4E
-#define READ_SCRATCHPAD  0xBE
-#define COPY_SCRATCHPAD  0x48
-#define RECALL_MEMORY    0xB8
-#define CONVERT_TEMP     0x44
-#define CONVERT_VOLTAGE  0xB4
-
-/* Chip is divided in 8 pages, 8 bytes each */
-
-#define EE_PAGE_SIZE 8
-
-/* All chip data we want are in page 0 */
-
-/* Bytes in page 0 */
-#define EE_P0_STATUS   0
-#define EE_P0_TEMP_LSB 1
-#define EE_P0_TEMP_MSB 2
-#define EE_P0_VOLT_LSB 3
-#define EE_P0_VOLT_MSB 4
-#define EE_P0_CURRENT_LSB 5
-#define EE_P0_CURRENT_MSB 6
-
-
-/* 40 byte user data is located at page 3-7 */
-#define EE_USER_PAGE_0 3
-#define USER_PAGES 5
-
-#endif /* INCeedevh */
diff --git a/board/gth/flash.c b/board/gth/flash.c
deleted file mode 100644
index 169270be1a6..00000000000
--- a/board/gth/flash.c
+++ /dev/null
@@ -1,649 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- * Protection Flags:
- */
-#define FLAG_PROTECT_SET	0x01
-#define FLAG_PROTECT_CLEAR	0x02
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	unsigned long size_b0, size_b1;
-	int i;
-
-	/*printf("faking");*/
-
-	return(0x1fffff);
-
-	/* Init: no FLASHes known */
-	for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
-	{
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN)
-	{
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0<<20);
-	}
-
-#if 0
-	if (FLASH_BASE1_PRELIM != 0x0) {
-	  size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
-
-	  if (size_b1 > size_b0) {
-	    printf ("## ERROR: Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
-		size_b1, size_b1<<20,size_b0, size_b0<<20);
-
-	    flash_info[0].flash_id	= FLASH_UNKNOWN;
-	    flash_info[1].flash_id	= FLASH_UNKNOWN;
-	    flash_info[0].sector_count	= -1;
-	    flash_info[1].sector_count	= -1;
-	    flash_info[0].size		= 0;
-	    flash_info[1].size		= 0;
-	    return (0);
-	  }
-	} else {
-#endif
-	  size_b1 = 0;
-
-	  /* Remap FLASH according to real size */
-	  memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
-	  memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
-
-	  /* Re-do sizing to get full correct info */
-	  size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-	  flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	  /* monitor protection ON by default */
-	  (void)flash_protect(FLAG_PROTECT_SET,
-			    CONFIG_SYS_MONITOR_BASE,
-			    CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-			    &flash_info[0]);
-#endif
-
-	if (size_b1)
-	{
-	  /* memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
-	     memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; */
-
-		/* Re-do sizing to get full correct info */
-		size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
-					 &flash_info[1]);
-
-		flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-		/* monitor protection ON by default */
-		(void)flash_protect(FLAG_PROTECT_SET,
-				    CONFIG_SYS_MONITOR_BASE,
-				    CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-				    &flash_info[1]);
-#endif
-	}
-	else
-	{
-/*	    memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
- FIXME	    memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;  */
-
-		flash_info[1].flash_id = FLASH_UNKNOWN;
-		flash_info[1].sector_count = -1;
-	}
-
-	flash_info[0].size = size_b0;
-	flash_info[1].size = size_b1;
-
-	return (size_b0 + size_b1);
-}
-
-
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	/* set up sector start adress table */
-	if (info->flash_id & FLASH_BTYPE)
-	{
-		/* set sector offsets for bottom boot block type	*/
-		for (i = 0; i < info->sector_count; i++)
-		{
-			info->start[i] = base + (i * 0x00040000);
-		}
-	}
-	else
-	{
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		for (; i >= 0; i--)
-		{
-			info->start[i] = base + i * 0x00040000;
-		}
-	}
-
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-
-#if 0
-	case FLASH_AM040B:
-		printf ("AM29F040B (4 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM040T:
-		printf ("AM29F040T (4 Mbit, top boot sect)\n");
-		break;
-#endif
-	case FLASH_AM400B:
-		printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM400T:
-		printf ("AM29LV400T (4 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM800B:
-		printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM800T:
-		printf ("AM29LV800T (8 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM160B:
-		printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM160T:
-		printf ("AM29LV160T (16 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM320B:
-		printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM320T:
-		printf ("AM29LV320T (32 Mbit, top boot sector)\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20,
-		info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-
-	for (i=0; i<info->sector_count; ++i)
-	{
-		if ((i % 5) == 0)
-		{
-			printf ("\n   ");
-		}
-
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-	short i;
-#if 0
-	ulong base = (ulong)addr;
-#endif
-	ulong value;
-
-	/* Write auto select command: read Manufacturer ID */
-#if 0
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00900090;
-#else
-	addr[0x0555] = 0xAAAAAAAA;
-	addr[0x02AA] = 0x55555555;
-	addr[0x0555] = 0x90909090;
-#endif
-
-	value = addr[0];
-
-	switch (value)
-	{
-		case AMD_MANUFACT:
-			info->flash_id = FLASH_MAN_AMD;
-		break;
-
-		case FUJ_MANUFACT:
-			info->flash_id = FLASH_MAN_FUJ;
-		break;
-
-		default:
-			info->flash_id = FLASH_UNKNOWN;
-			info->sector_count = 0;
-			info->size = 0;
-			break;
-	}
-
-	value = addr[1];			/* device ID		*/
-
-	switch (value)
-	{
-#if 0
-		case AMD_ID_F040B:
-			info->flash_id += FLASH_AM040B;
-			info->sector_count = 8;
-			info->size = 0x00200000;
-			break;				/* => 2 MB		*/
-#endif
-		case AMD_ID_LV400T:
-			info->flash_id += FLASH_AM400T;
-			info->sector_count = 11;
-			info->size = 0x00100000;
-			break;				/* => 1 MB		*/
-
-		case AMD_ID_LV400B:
-			info->flash_id += FLASH_AM400B;
-			info->sector_count = 11;
-			info->size = 0x00100000;
-			break;				/* => 1 MB		*/
-
-		case AMD_ID_LV800T:
-			info->flash_id += FLASH_AM800T;
-			info->sector_count = 19;
-			info->size = 0x00200000;
-			break;				/* => 2 MB		*/
-
-		case AMD_ID_LV800B:
-			info->flash_id += FLASH_AM800B;
-			info->sector_count = 19;
-			info->size = 0x00200000;
-			break;				/* => 2 MB		*/
-
-		case AMD_ID_LV160T:
-			info->flash_id += FLASH_AM160T;
-			info->sector_count = 35;
-			info->size = 0x00400000;
-			break;				/* => 4 MB		*/
-
-		case AMD_ID_LV160B:
-			info->flash_id += FLASH_AM160B;
-			info->sector_count = 35;
-			info->size = 0x00400000;
-			break;				/* => 4 MB		*/
-#if 0	/* enable when device IDs are available */
-		case AMD_ID_LV320T:
-			info->flash_id += FLASH_AM320T;
-			info->sector_count = 67;
-			info->size = 0x00800000;
-			break;				/* => 8 MB		*/
-
-		case AMD_ID_LV320B:
-			info->flash_id += FLASH_AM320B;
-			info->sector_count = 67;
-			info->size = 0x00800000;
-			break;				/* => 8 MB		*/
-#endif
-		default:
-			info->flash_id = FLASH_UNKNOWN;
-			return (0);			/* => no or unknown flash */
-
-	}
-
-#if 0
-	/* set up sector start adress table */
-	if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00008000;
-		info->start[2] = base + 0x0000C000;
-		info->start[3] = base + 0x00010000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00020000) - 0x00060000;
-		}
-	} else {
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00008000;
-		info->start[i--] = base + info->size - 0x0000C000;
-		info->start[i--] = base + info->size - 0x00010000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00020000;
-		}
-	}
-#else
-	flash_get_offsets ((ulong)addr, &flash_info[0]);
-#endif
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++)
-	{
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-		addr = (volatile unsigned long *)(info->start[i]);
-		info->protect[i] = addr[2] & 1;
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN)
-	{
-		addr = (volatile unsigned long *)info->start[0];
-#if 0
-		*addr = 0x00F000F0;	/* reset bank */
-#else
-		*addr = 0xF0F0F0F0;	/* reset bank */
-#endif
-	}
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	vu_long *addr = (vu_long*)(info->start[0]);
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    (info->flash_id > FLASH_AMD_COMP)) {
-		printf ("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-#if 0
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00800080;
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-#else
-	addr[0x0555] = 0xAAAAAAAA;
-	addr[0x02AA] = 0x55555555;
-	addr[0x0555] = 0x80808080;
-	addr[0x0555] = 0xAAAAAAAA;
-	addr[0x02AA] = 0x55555555;
-#endif
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (vu_long*)(info->start[sect]);
-#if 0
-			addr[0] = 0x00300030;
-#else
-			addr[0] = 0x30303030;
-#endif
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last  = start;
-	addr = (vu_long*)(info->start[l_sect]);
-#if 0
-	while ((addr[0] & 0x00800080) != 0x00800080)
-#else
-	while ((addr[0] & 0xFFFFFFFF) != 0xFFFFFFFF)
-#endif
-	{
-		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc ('.');
-			last = now;
-		}
-	}
-
-DONE:
-	/* reset to read mode */
-	addr = (volatile unsigned long *)info->start[0];
-#if 0
-	addr[0] = 0x00F000F0;	/* reset bank */
-#else
-	addr[0] = 0xF0F0F0F0;	/* reset bank */
-#endif
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	return (write_word(info, wp, data));
-}
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	vu_long *addr = (vu_long*)(info->start[0]);
-	ulong start;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *)dest) & data) != data) {
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-#if 0
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00A000A0;
-#else
-	addr[0x0555] = 0xAAAAAAAA;
-	addr[0x02AA] = 0x55555555;
-	addr[0x0555] = 0xA0A0A0A0;
-#endif
-
-	*((vu_long *)dest) = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-#if 0
-	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080))
-#else
-	while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080))
-#endif
-	{
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			return (1);
-		}
-	}
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/gth/gth.c b/board/gth/gth.c
deleted file mode 100644
index 4399db2d56f..00000000000
--- a/board/gth/gth.c
+++ /dev/null
@@ -1,595 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Adapted from FADS and other board config files to GTH by thomas@corelatus.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <watchdog.h>
-#include <mpc8xx.h>
-#include "ee_access.h"
-#include "ee_dev.h"
-
-#ifdef CONFIG_BDM
-#undef printf
-#define printf(a,...)			/* nothing */
-#endif
-
-
-int checkboard (void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	int Id = 0;
-	int Rev = 0;
-	u32 Pbdat;
-
-	puts ("Board: ");
-
-	/* Turn on leds and setup for reading rev and id */
-
-#define PB_OUTS (PB_BLUE_LED|PB_ID_GND)
-#define PB_INS  (PB_ID_0|PB_ID_1|PB_ID_2|PB_ID_3|PB_REV_1|PB_REV_0)
-
-	immap->im_cpm.cp_pbpar &= ~(PB_OUTS | PB_INS);
-
-	immap->im_cpm.cp_pbdir &= ~PB_INS;
-
-	immap->im_cpm.cp_pbdir |= PB_OUTS;
-	immap->im_cpm.cp_pbodr |= PB_OUTS;
-	immap->im_cpm.cp_pbdat &= ~PB_OUTS;
-
-	/* Hold 100 Mbit in reset until fpga is loaded */
-	immap->im_ioport.iop_pcpar &= ~PC_ENET100_RESET;
-	immap->im_ioport.iop_pcdir |= PC_ENET100_RESET;
-	immap->im_ioport.iop_pcso &= ~PC_ENET100_RESET;
-	immap->im_ioport.iop_pcdat &= ~PC_ENET100_RESET;
-
-	/* Turn on front led to show that we are alive */
-	immap->im_ioport.iop_papar &= ~PA_FRONT_LED;
-	immap->im_ioport.iop_padir |= PA_FRONT_LED;
-	immap->im_ioport.iop_paodr |= PA_FRONT_LED;
-	immap->im_ioport.iop_padat &= ~PA_FRONT_LED;
-
-	Pbdat = immap->im_cpm.cp_pbdat;
-
-	if (!(Pbdat & PB_ID_0))
-		Id += 1;
-	if (!(Pbdat & PB_ID_1))
-		Id += 2;
-	if (!(Pbdat & PB_ID_2))
-		Id += 4;
-	if (!(Pbdat & PB_ID_3))
-		Id += 8;
-
-	if (Pbdat & PB_REV_0)
-		Rev += 1;
-	if (Pbdat & PB_REV_1)
-		Rev += 2;
-
-	/* Turn ID off since we dont need it anymore */
-	immap->im_cpm.cp_pbdat |= PB_ID_GND;
-
-	printf ("GTH board, rev %d, id=0x%01x\n", Rev, Id);
-	return 0;
-}
-
-#define _NOT_USED_ 0xffffffff
-const uint sdram_table[] = {
-	/* Single read, offset 0 */
-	0x0f3dfc04, 0x0eefbc04, 0x01bf7c04, 0x0feafc00,
-	0x1fb5fc45, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* Burst read, Offset 0x8, 4 reads */
-	0x0f3dfc04, 0x0eefbc04, 0x00bf7c04, 0x00ffec00,
-	0x00fffc00, 0x01eafc00, 0x1fb5fc00, 0xfffffc45,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* Not used part of burst read is used for MRS, Offset 0x14 */
-	0xefeabc34, 0x1fb57c34, 0xfffffc05, _NOT_USED_,
-	/* _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, */
-
-	/* Single write, Offset 0x18 */
-	0x0f3dfc04, 0x0eebbc00, 0x01a27c04, 0x1fb5fc45,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* Burst write, Offset 0x20. 4 writes */
-	0x0f3dfc04, 0x0eebbc00, 0x00b77c00, 0x00fffc00,
-	0x00fffc00, 0x01eafc04, 0x1fb5fc45, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* Not used part of burst write is used for precharge, Offset 0x2C */
-	0x0ff5fc04, 0xfffffc05, _NOT_USED_, _NOT_USED_,
-	/* _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, */
-
-	/* Period timer service. Offset 0x30. Refresh. Wait at least 70 ns after refresh command */
-	0x1ffd7c04, 0xfffffc04, 0xfffffc04, 0xfffffc05,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* Exception, Offset 0x3C */
-	0xfffffc04, 0xfffffc05, _NOT_USED_, _NOT_USED_
-};
-
-const uint fpga_table[] = {
-	/* Single read, offset 0 */
-	0x0cffec04, 0x00ffec04, 0x00ffec04, 0x00ffec04,
-	0x00fffc04, 0x00fffc00, 0x00ffec04, 0xffffec05,
-
-	/* Burst read, Offset 0x8 */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* Single write, Offset 0x18 */
-	0x0cffec04, 0x00ffec04, 0x00ffec04, 0x00ffec04,
-	0x00fffc04, 0x00fffc00, 0x00ffec04, 0xffffec05,
-
-	/* Burst write, Offset 0x20. */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* Period timer service. Offset 0x30. */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* Exception, Offset 0x3C */
-	0xfffffc04, 0xfffffc05, _NOT_USED_, _NOT_USED_
-};
-
-int _initsdram (uint base, uint * noMbytes)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *mc = &immap->im_memctl;
-	volatile u32 *memptr;
-
-	mc->memc_mptpr = MPTPR_PTP_DIV16;	/* (16-17) */
-
-	/*  SDRAM in UPMA
-
-	   GPL_0 is connected instead of A19 to SDRAM.
-	   According to table 16-17, AMx should be 001, i.e. type 1
-	   and GPL_0 should hold address A10 when multiplexing */
-
-	mc->memc_mamr = (0x2E << MAMR_PTA_SHIFT) | MAMR_PTAE | MAMR_AMA_TYPE_1 | MAMR_G0CLA_A10 | MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_1X;	/* (16-13) */
-
-	upmconfig (UPMA, (uint *) sdram_table,
-			   sizeof (sdram_table) / sizeof (uint));
-
-	/* Perform init of sdram ( Datasheet Page 9 )
-	   Precharge */
-	mc->memc_mcr = 0x8000212C;	/* run upm a at 0x2C (16-15) */
-
-	/* Run 2 refresh cycles */
-	mc->memc_mcr = 0x80002130;	/* run upm a at 0x30 (16-15) */
-	mc->memc_mcr = 0x80002130;	/* run upm a at 0x30 (16-15) */
-
-	/* Set Mode register */
-	mc->memc_mar = 0x00000088;	/* set mode register (address) to 0x022 (16-17) */
-	/* Lower 2 bits are not connected to chip */
-	mc->memc_mcr = 0x80002114;	/* run upm a at 0x14 (16-15) */
-
-	/* CS1, base 0x0000000 - 64 Mbyte, use UPM A */
-	mc->memc_or1 = 0xfc000000 | OR_CSNT_SAM;
-	mc->memc_br1 = BR_MS_UPMA | BR_V;	/* SDRAM base always 0 */
-
-	/* Test if we really have 64 MB SDRAM */
-	memptr = (u32 *) 0;
-	*memptr = 0;
-
-	memptr = (u32 *) 0x2000000;	/* First u32 in upper 32 MB */
-	*memptr = 0x12345678;
-
-	memptr = (u32 *) 0;
-	if (*memptr == 0x12345678) {
-		/* Wrapped, only have 32 MB */
-		mc->memc_or1 = 0xfe000000 | OR_CSNT_SAM;
-		*noMbytes = 32;
-	} else {
-		/* 64 MB */
-		*noMbytes = 64;
-	}
-
-	/* Setup FPGA in UPMB */
-	upmconfig (UPMB, (uint *) fpga_table,
-			   sizeof (fpga_table) / sizeof (uint));
-
-	/* Enable UPWAITB */
-	mc->memc_mbmr = MBMR_GPL_B4DIS;	/* (16-13) */
-
-	/* CS2, base FPGA_2_BASE - 4 MByte, use UPM B 32 Bit */
-	mc->memc_or2 = 0xffc00000 | OR_BI;
-	mc->memc_br2 = FPGA_2_BASE | BR_MS_UPMB | BR_V;
-
-	/* CS3, base FPGA_3_BASE - 4 MByte, use UPM B 16 bit */
-	mc->memc_or3 = 0xffc00000 | OR_BI;
-	mc->memc_br3 = FPGA_3_BASE | BR_MS_UPMB | BR_V | BR_PS_16;
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-void _sdramdisable (void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	memctl->memc_br1 = 0x00000000;
-
-	/* maybe we should turn off upmb here or something */
-}
-
-/* ------------------------------------------------------------------------- */
-
-int initsdram (uint base, uint * noMbytes)
-{
-	*noMbytes = 32;
-
-#ifdef CONFIG_START_IN_RAM
-	/* SDRAM is already setup. Dont touch it */
-	return 0;
-#else
-
-	if (!_initsdram (base, noMbytes)) {
-
-		return 0;
-	} else {
-		_sdramdisable ();
-
-		return -1;
-	}
-#endif
-}
-
-phys_size_t initdram (int board_type)
-{
-	u32 *i;
-	u32 j;
-	u32 k;
-
-	/* GTH only have SDRAM */
-	uint sdramsz;
-
-	if (!initsdram (0x00000000, &sdramsz)) {
-		printf ("(%u MB SDRAM) ", sdramsz);
-	} else {
-	/********************************
-     *SDRAM ERROR, HALT PROCESSOR
-     *********************************/
-		printf ("SDRAM ERROR\n");
-		while (1);
-	}
-
-#ifndef CONFIG_START_IN_RAM
-
-#define U32_S ((sdramsz<<18)-1)
-
-#if 1
-	/* Do a simple memory test */
-	for (i = (u32 *) 0, j = 0; (u32) i < U32_S; i += 2, j += 2) {
-		*i = j + (j << 17);
-		*(i + 1) = ~(j + (j << 18));
-	}
-
-	WATCHDOG_RESET ();
-
-	printf (".");
-
-	for (i = (u32 *) 0, j = 0; (u32) i < U32_S; i += 2, j += 2) {
-		k = *i;
-		if (k != (j + (j << 17))) {
-			printf ("Mem test error, i=0x%x, 0x%x\n, 0x%x", (u32) i, j, k);
-			while (1);
-		}
-		k = *(i + 1);
-		if (k != ~(j + (j << 18))) {
-			printf ("Mem test error(+1), i=0x%x, 0x%x\n, 0x%x",
-					(u32) i + 1, j, k);
-			while (1);
-		}
-	}
-#endif
-
-	WATCHDOG_RESET ();
-
-	/* Clear memory */
-	for (i = (u32 *) 0; (u32) i < U32_S; i++) {
-		*i = 0;
-	}
-#endif /* !start in ram */
-
-	WATCHDOG_RESET ();
-
-	return (sdramsz << 20);
-}
-
-#define POWER_OFFSET    0xF0000
-#define SW_WATCHDOG_REASON 13
-
-#define BOOTDATA_OFFSET 0xF8000
-#define MAX_ATTEMPTS 5
-
-#define FAILSAFE_BOOT 1
-#define SYSTEM_BOOT   2
-
-#define WRITE_FLASH16(a, d)      \
-do                              \
-{                               \
-  *((volatile u16 *) (a)) = (d);\
- } while(0)
-
-static void write_bootdata (volatile u16 * addr, u8 System, u8 Count)
-{
-	u16 data;
-	volatile u16 *flash = (u16 *) (CONFIG_SYS_FLASH_BASE);
-
-	if ((System != FAILSAFE_BOOT) & (System != SYSTEM_BOOT)) {
-		printf ("Invalid system data %u, setting failsafe\n", System);
-		System = FAILSAFE_BOOT;
-	}
-
-	if ((Count < 1) | (Count > MAX_ATTEMPTS)) {
-		printf ("Invalid boot count %u, setting 1\n", Count);
-		Count = 1;
-	}
-
-	if (System == FAILSAFE_BOOT) {
-		printf ("Setting failsafe boot in flash\n");
-	} else {
-		printf ("Setting system boot in flash\n");
-	}
-	printf ("Boot attempt %d\n", Count);
-
-	data = (System << 8) | Count;
-	/* AMD 16 bit */
-	WRITE_FLASH16 (&flash[0x555], 0xAAAA);
-	WRITE_FLASH16 (&flash[0x2AA], 0x5555);
-	WRITE_FLASH16 (&flash[0x555], 0xA0A0);
-
-	WRITE_FLASH16 (addr, data);
-}
-
-static void maybe_update_restart_reason (volatile u32 * addr32)
-{
-	/* Update addr if sw wd restart */
-	volatile u16 *flash = (u16 *) (CONFIG_SYS_FLASH_BASE);
-	volatile u16 *addr_16 = (u16 *) addr32;
-	u32 rsr;
-
-	/* Dont reset register now */
-	rsr = ((volatile immap_t *) CONFIG_SYS_IMMR)->im_clkrst.car_rsr;
-
-	rsr >>= 24;
-
-	if (rsr & 0x10) {
-		/* Was really a sw wd restart, update reason */
-
-		printf ("Last restart by software watchdog\n");
-
-		/* AMD 16 bit */
-		WRITE_FLASH16 (&flash[0x555], 0xAAAA);
-		WRITE_FLASH16 (&flash[0x2AA], 0x5555);
-		WRITE_FLASH16 (&flash[0x555], 0xA0A0);
-
-		WRITE_FLASH16 (addr_16, 0);
-
-		udelay (1000);
-
-		WATCHDOG_RESET ();
-
-		/* AMD 16 bit */
-		WRITE_FLASH16 (&flash[0x555], 0xAAAA);
-		WRITE_FLASH16 (&flash[0x2AA], 0x5555);
-		WRITE_FLASH16 (&flash[0x555], 0xA0A0);
-
-		WRITE_FLASH16 (addr_16 + 1, SW_WATCHDOG_REASON);
-
-	}
-}
-
-static void check_restart_reason (void)
-{
-	/* Update restart reason if sw watchdog was
-	   triggered */
-
-	int i;
-	volatile u32 *raddr;
-
-	raddr = (u32 *) (CONFIG_SYS_FLASH_BASE + POWER_OFFSET);
-
-	if (*raddr == 0xFFFFFFFF) {
-		/* Nothing written */
-		maybe_update_restart_reason (raddr);
-	} else {
-		/* Search for latest written reason */
-		i = 0;
-		while ((*(raddr + 2) != 0xFFFFFFFF) & (i < 2000)) {
-			raddr += 2;
-			i++;
-		}
-		if (i >= 2000) {
-			/* Whoa, dont write any more */
-			printf ("*** No free restart reason found ***\n");
-		} else {
-			/* Check if written */
-			if (*raddr == 0) {
-				/* Erased by kernel, no new reason written */
-				maybe_update_restart_reason (raddr + 2);
-			}
-		}
-	}
-}
-
-static void check_boot_tries (void)
-{
-	/* Count the number of boot attemps
-	   switch system if too many */
-
-	int i;
-	volatile u16 *addr;
-	volatile u16 data;
-	int failsafe = 1;
-	u8 system;
-	u8 count;
-
-	addr = (u16 *) (CONFIG_SYS_FLASH_BASE + BOOTDATA_OFFSET);
-
-	if (*addr == 0xFFFF) {
-		printf ("*** No bootdata exists. ***\n");
-		write_bootdata (addr, FAILSAFE_BOOT, 1);
-	} else {
-		/* Search for latest written bootdata */
-		i = 0;
-		while ((*(addr + 1) != 0xFFFF) & (i < 8000)) {
-			addr++;
-			i++;
-		}
-		if (i >= 8000) {
-			/* Whoa, dont write any more */
-			printf ("*** No bootdata found. Not updating flash***\n");
-		} else {
-			/* See how many times we have tried to boot real system */
-			data = *addr;
-			system = data >> 8;
-			count = data & 0xFF;
-			if ((system != SYSTEM_BOOT) & (system != FAILSAFE_BOOT)) {
-				printf ("*** Wrong system %d\n", system);
-				system = FAILSAFE_BOOT;
-				count = 1;
-			} else {
-				switch (count) {
-				case 0:
-				case 1:
-				case 2:
-				case 3:
-				case 4:
-					/* Try same system again if needed */
-					count++;
-					break;
-
-				case 5:
-					/* Switch system and reset tries */
-					count = 1;
-					system = 3 - system;
-					printf ("***Too many boot attempts, switching system***\n");
-					break;
-				default:
-					/* Switch system, start over and hope it works */
-					printf ("***Unexpected data on addr 0x%x, %u***\n",
-							(u32) addr, data);
-					count = 1;
-					system = 3 - system;
-				}
-			}
-			write_bootdata (addr + 1, system, count);
-			if (system == SYSTEM_BOOT) {
-				failsafe = 0;
-			}
-		}
-	}
-	if (failsafe) {
-		printf ("Booting failsafe system\n");
-		setenv ("bootargs", "panic=1 root=/dev/hda7");
-		setenv ("bootcmd", "disk 100000 0:5;bootm 100000");
-	} else {
-		printf ("Using normal system\n");
-		setenv ("bootargs", "panic=1 root=/dev/hda4");
-		setenv ("bootcmd", "disk 100000 0:2;bootm 100000");
-	}
-}
-
-int misc_init_r (void)
-{
-	u8 Rx[80];
-	u8 Tx[5];
-	int page;
-	int read = 0;
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
-	/* Kill fpga */
-	immap->im_ioport.iop_papar &= ~(PA_FL_CONFIG | PA_FL_CE);
-	immap->im_ioport.iop_padir |= (PA_FL_CONFIG | PA_FL_CE);
-	immap->im_ioport.iop_paodr &= ~(PA_FL_CONFIG | PA_FL_CE);
-
-	/* Enable fpga, active low */
-	immap->im_ioport.iop_padat &= ~PA_FL_CE;
-
-	/* Start configuration */
-	immap->im_ioport.iop_padat &= ~PA_FL_CONFIG;
-	udelay (2);
-
-	immap->im_ioport.iop_padat |= (PA_FL_CONFIG | PA_FL_CE);
-
-	/* Check if we need to boot failsafe system */
-	check_boot_tries ();
-
-	/* Check if we need to update restart reason */
-	check_restart_reason ();
-
-	if (ee_init_data ()) {
-		printf ("EEPROM init failed\n");
-		return (0);
-	}
-
-	/* Read the pages where ethernet address is stored */
-
-	for (page = EE_USER_PAGE_0; page <= EE_USER_PAGE_0 + 2; page++) {
-		/* Copy from nvram to scratchpad */
-		Tx[0] = RECALL_MEMORY;
-		Tx[1] = page;
-		if (ee_do_command (Tx, 2, NULL, 0, TRUE)) {
-			printf ("EE user page %d recall failed\n", page);
-			return (0);
-		}
-
-		Tx[0] = READ_SCRATCHPAD;
-		if (ee_do_command (Tx, 2, Rx + read, 9, TRUE)) {
-			printf ("EE user page %d read failed\n", page);
-			return (0);
-		}
-		/* Crc in 9:th byte */
-		if (!ee_crc_ok (Rx + read, 8, *(Rx + read + 8))) {
-			printf ("EE read failed, page %d. CRC error\n", page);
-			return (0);
-		}
-		read += 8;
-	}
-
-	/* Add eos after eth addr */
-	Rx[17] = 0;
-
-	printf ("Ethernet addr read from eeprom: %s\n\n", Rx);
-
-	if ((Rx[2] != ':') |
-		(Rx[5] != ':') |
-		(Rx[8] != ':') | (Rx[11] != ':') | (Rx[14] != ':')) {
-		printf ("*** ethernet addr invalid, using default ***\n");
-	} else {
-		setenv ("ethaddr", (char *)Rx);
-	}
-	return (0);
-}
diff --git a/board/gth/pcmcia.c b/board/gth/pcmcia.c
deleted file mode 100644
index a4db16d0ced..00000000000
--- a/board/gth/pcmcia.c
+++ /dev/null
@@ -1,93 +0,0 @@
-#include <common.h>
-#include <mpc8xx.h>
-#include <pcmcia.h>
-
-#undef	CONFIG_PCMCIA
-
-#if defined(CONFIG_CMD_PCMCIA)
-#define	CONFIG_PCMCIA
-#endif
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
-#define	CONFIG_PCMCIA
-#endif
-
-#ifdef	CONFIG_PCMCIA
-
-#define PCMCIA_BOARD_MSG "GTH COMPACT FLASH"
-
-int pcmcia_voltage_set (int slot, int vcc, int vpp)
-{	/* Do nothing */
-	return 0;
-}
-
-int pcmcia_hardware_enable (int slot)
-{
-	volatile immap_t *immap;
-	volatile cpm8xx_t *cp;
-	volatile pcmconf8xx_t *pcmp;
-	volatile sysconf8xx_t *sysp;
-	uint reg, mask;
-
-	debug ("hardware_enable: GTH Slot %c\n", 'A' + slot);
-
-	immap = (immap_t *) CONFIG_SYS_IMMR;
-	sysp = (sysconf8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_siu_conf));
-	pcmp = (pcmconf8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_pcmcia));
-	cp = (cpm8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_cpm));
-
-	/* clear interrupt state, and disable interrupts */
-	pcmp->pcmc_pscr = PCMCIA_MASK (_slot_);
-	pcmp->pcmc_per &= ~PCMCIA_MASK (_slot_);
-
-	/*
-	* Disable interrupts, DMA, and PCMCIA buffers
-	* (isolate the interface) and assert RESET signal
-	*/
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;	/* active low  */
-	PCMCIA_PGCRX (_slot_) = reg;
-	udelay (500);
-
-	/*
-	* Make sure there is a card in the slot,
-	* then configure the interface.
-	*/
-	udelay (10000);
-	debug ("[%d] %s: PIPR(%p)=0x%x\n",
-	       __LINE__, __FUNCTION__,
-	       &(pcmp->pcmc_pipr), pcmp->pcmc_pipr);
-	if (pcmp->pcmc_pipr & 0x98000000) {
-		printf ("   No Card found\n");
-		return (1);
-	}
-
-	mask = PCMCIA_VS1 (slot) | PCMCIA_VS2 (slot);
-	reg = pcmp->pcmc_pipr;
-	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
-	       reg,
-	       (reg & PCMCIA_VS1 (slot)) ? "n" : "ff",
-	       (reg & PCMCIA_VS2 (slot)) ? "n" : "ff");
-
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX (_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX (_slot_) = reg;
-
-	udelay (250000);	/* some cards need >150 ms to come up :-( */
-
-	debug ("# hardware_enable done\n");
-
-	return 0;
-}
-#if defined(CONFIG_CMD_PCMCIA)
-int pcmcia_hardware_disable(int slot)
-{
-	return 0;	/* No hardware to disable */
-}
-#endif
-
-#endif	/* CONFIG_PCMCIA */
diff --git a/board/gth/u-boot.lds b/board/gth/u-boot.lds
deleted file mode 100644
index 4145a91c744..00000000000
--- a/board/gth/u-boot.lds
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    arch/powerpc/cpu/mpc8xx/start.o(.text)
-    *(.text)
-    common/env_embedded.o(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.eh_frame)
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c
index 5dd0311d419..9a929413bd0 100644
--- a/board/hymod/bsp.c
+++ b/board/hymod/bsp.c
@@ -272,8 +272,7 @@ do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 		break;
 	}
 
-	cmd_usage(cmdtp);
-	return 1;
+	return cmd_usage(cmdtp);
 }
 U_BOOT_CMD(
 	fpga,	6,	1,	do_fpga,
@@ -324,8 +323,7 @@ do_eecl (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 		/* fall through ... */
 
 	default:
-		cmd_usage(cmdtp);
-		return 1;
+		return cmd_usage(cmdtp);
 	}
 
 	memset (data, 0, HYMOD_EEPROM_SIZE);
diff --git a/board/inka4x0/inkadiag.c b/board/inka4x0/inkadiag.c
index 637bb5a7b3b..cf82f61ef70 100644
--- a/board/inka4x0/inkadiag.c
+++ b/board/inka4x0/inkadiag.c
@@ -168,8 +168,7 @@ static int do_inkadiag_io(cmd_tbl_t *cmdtp, int flag, int argc,
 		printf("exit code: 0x%X\n", val);
 		return 0;
 	default:
-		cmd_usage(cmdtp);
-		break;
+		return cmd_usage(cmdtp);
 	}
 
 	return -1;
@@ -244,10 +243,8 @@ static int do_inkadiag_serial(cmd_tbl_t *cmdtp, int flag, int argc,
 	int combrd, baudrate, i, j, len;
 	int address;
 
-	if (argc < 5) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc < 5)
+		return cmd_usage(cmdtp);
 
 	argc--;
 	argv++;
@@ -394,10 +391,8 @@ static int do_inkadiag_buzzer(cmd_tbl_t *cmdtp, int flag, int argc,
 	unsigned int period, freq;
 	int prev, i;
 
-	if (argc != 3) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc != 3)
+		return cmd_usage(cmdtp);
 
 	argc--;
 	argv++;
@@ -474,8 +469,7 @@ static int do_inkadiag(cmd_tbl_t *cmdtp, int flag, int argc,
 		return c->cmd(c, flag, argc, argv);
 	} else {
 		/* Unrecognized command */
-		cmd_usage(cmdtp);
-		return 1;
+		return cmd_usage(cmdtp);
 	}
 }
 
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index 3a33b5a5114..d7cbd7a2a99 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -186,10 +186,8 @@ int board_init(void)
 int do_spi_toggle(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	u32 tmp;
-	if (argc < 2) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc < 2)
+		return cmd_usage(cmdtp);
 
 	if ((strcmp(argv[1], "off") == 0)) {
 		printf("SPI FLASH disabled, NAND enabled\n");
@@ -214,8 +212,7 @@ int do_spi_toggle(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		tmp = readl(KW_GPIO0_BASE);
 		writel(tmp & (~FLASH_GPIO_PIN) , KW_GPIO0_BASE);
 	} else {
-		cmd_usage(cmdtp);
-		return 1;
+		return cmd_usage(cmdtp);
 	}
 
 	return 0;
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index 61a1e1417fe..9d6c21f73ae 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -845,8 +845,7 @@ int do_pic (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	default:
 		break;
 	}
-	cmd_usage(cmdtp);
-	return 1;
+	return cmd_usage(cmdtp);
 }
 U_BOOT_CMD(
 	pic,	4,	1,	do_pic,
@@ -975,8 +974,7 @@ int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	default:
 		break;
 	}
-	cmd_usage(cmdtp);
-	return 1;
+	return cmd_usage(cmdtp);
 }
 
 U_BOOT_CMD(
diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c
index 3948c13b646..ec113e7f56f 100644
--- a/board/lwmon5/lwmon5.c
+++ b/board/lwmon5/lwmon5.c
@@ -306,20 +306,15 @@ void hw_watchdog_reset(void)
 
 int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	if (argc < 2) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc < 2)
+		return cmd_usage(cmdtp);
 
-	if ((strcmp(argv[1], "on") == 0)) {
+	if ((strcmp(argv[1], "on") == 0))
 		gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 1);
-	} else if ((strcmp(argv[1], "off") == 0)) {
+	else if ((strcmp(argv[1], "off") == 0))
 		gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 0);
-	} else {
-		cmd_usage(cmdtp);
-		return 1;
-	}
-
+	else
+		return cmd_usage(cmdtp);
 
 	return 0;
 }
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index a3722b2024d..b4343d81ded 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -528,8 +528,7 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		return 0;
 	}
 #endif
-	cmd_usage(cmdtp);
-	return 1;
+	return cmd_usage(cmdtp);
 }
 
 
diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c
index 199def46787..4a91458e8e6 100644
--- a/board/pcippc2/pcippc2.c
+++ b/board/pcippc2/pcippc2.c
@@ -232,8 +232,7 @@ int do_wd (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	default:
 		break;
 	}
-	cmd_usage(cmdtp);
-	return 1;
+	return cmd_usage(cmdtp);
 }
 
 U_BOOT_CMD(
diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c
index d7adff2f8e6..a61e9451aa4 100644
--- a/board/pcs440ep/pcs440ep.c
+++ b/board/pcs440ep/pcs440ep.c
@@ -616,9 +616,8 @@ int do_sha1 (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	int	rcode = -1;
 
 	if (argc < 2) {
-  usage:
-		cmd_usage(cmdtp);
-		return 1;
+usage:
+		return cmd_usage(cmdtp);
 	}
 
 	if (argc >= 3) {
diff --git a/board/pdm360ng/pdm360ng.c b/board/pdm360ng/pdm360ng.c
index 29a095d738b..e3abeb8ef1e 100644
--- a/board/pdm360ng/pdm360ng.c
+++ b/board/pdm360ng/pdm360ng.c
@@ -635,10 +635,8 @@ static int set_lcd_brightness(char *brightness)
 static int cmd_lcd_brightness(cmd_tbl_t *cmdtp, int flag,
 			      int argc, char * const argv[])
 {
-	if (argc < 2) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc < 2)
+		return cmd_usage(cmdtp);
 
 	return set_lcd_brightness(argv[1]);
 }
diff --git a/board/pn62/cmd_pn62.c b/board/pn62/cmd_pn62.c
index 73294351bae..692160cea8a 100644
--- a/board/pn62/cmd_pn62.c
+++ b/board/pn62/cmd_pn62.c
@@ -36,20 +36,20 @@ extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
 /*
  * Command led: controls the various LEDs 0..11 on the PN62 card.
  */
-int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_led(cmd_tbl_t * cmdtp, int flag, int argc, char *const argv[])
 {
-    unsigned int number, function;
+	unsigned int number, function;
 
-    if (argc != 3) {
-	cmd_usage(cmdtp);
-	return 1;
-    }
-    number = simple_strtoul(argv[1], NULL, 10);
-    if (number > PN62_LED_MAX)
-	return 1;
-    function = simple_strtoul(argv[2], NULL, 16);
-    set_led (number, function);
-    return 0;
+	if (argc != 3)
+		return cmd_usage(cmdtp);
+
+	number = simple_strtoul(argv[1], NULL, 10);
+	if (number > PN62_LED_MAX)
+		return 1;
+
+	function = simple_strtoul(argv[2], NULL, 16);
+	set_led(number, function);
+	return 0;
 }
 U_BOOT_CMD(
 	led    ,	3,	1,	do_led,
@@ -83,8 +83,7 @@ int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	addr = simple_strtoul(argv[1], NULL, 16);
 	break;
     default:
-       cmd_usage(cmdtp);
-	return 1;
+        return cmd_usage(cmdtp);
     }
 
     printf ("## Ready for image download ...\n");
diff --git a/board/prodrive/pdnb3/pdnb3.c b/board/prodrive/pdnb3/pdnb3.c
index 3f2deed1e2b..83b79148cb6 100644
--- a/board/prodrive/pdnb3/pdnb3.c
+++ b/board/prodrive/pdnb3/pdnb3.c
@@ -214,10 +214,8 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	ulong addr;
 
-	if (argc < 2) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc < 2)
+		return cmd_usage(cmdtp);
 
 	addr = simple_strtoul(argv[1], NULL, 16);
 
diff --git a/board/renesas/sh7785lcr/rtl8169_mac.c b/board/renesas/sh7785lcr/rtl8169_mac.c
index dae01ec7735..e15013f2fcb 100644
--- a/board/renesas/sh7785lcr/rtl8169_mac.c
+++ b/board/renesas/sh7785lcr/rtl8169_mac.c
@@ -304,10 +304,8 @@ int do_set_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	unsigned char mac[6];
 	char *s, *e;
 
-	if (argc != 2) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc != 2)
+		return cmd_usage(cmdtp);
 
 	s = argv[1];
 
@@ -330,10 +328,8 @@ U_BOOT_CMD(
 
 int do_print_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	if (argc != 1) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc != 1)
+		return cmd_usage(cmdtp);
 
 	mac_read();
 
diff --git a/board/renesas/sh7785lcr/selfcheck.c b/board/renesas/sh7785lcr/selfcheck.c
index 44247c850fe..6d92c8362e7 100644
--- a/board/renesas/sh7785lcr/selfcheck.c
+++ b/board/renesas/sh7785lcr/selfcheck.c
@@ -112,10 +112,8 @@ int do_hw_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	char *cmd;
 
-	if (argc != 2) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc != 2)
+		return cmd_usage(cmdtp);
 
 	cmd = argv[1];
 	switch (cmd[0]) {
@@ -150,8 +148,7 @@ int do_hw_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		test_net();
 		break;
 	default:
-		cmd_usage(cmdtp);
-		return 1;
+		return cmd_usage(cmdtp);
 	}
 
 	return 0;
diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
index d62cfd1befa..733979c6190 100644
--- a/board/sbc8548/sbc8548.c
+++ b/board/sbc8548/sbc8548.c
@@ -398,11 +398,9 @@ int last_stage_init(void)
 void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
+
+#ifdef CONFIG_FSL_PCI_INIT
+	FT_FSL_PCI_SETUP;
 #endif
 }
 #endif
diff --git a/board/sbc8641d/law.c b/board/sbc8641d/law.c
index d20fa51c3d7..705e1c2964f 100644
--- a/board/sbc8641d/law.c
+++ b/board/sbc8641d/law.c
@@ -32,11 +32,11 @@
  *
  * 0x0000_0000	DDR			256M
  * 0x1000_0000	DDR2			256M
- * 0x8000_0000	PCI1 MEM		512M
- * 0xa000_0000	PCI2 MEM		512M
+ * 0x8000_0000	PCIE1 MEM		512M
+ * 0xa000_0000	PCIE2 MEM		512M
  * 0xc000_0000	RapidIO			512M
- * 0xe200_0000	PCI1 IO			16M
- * 0xe300_0000	PCI2 IO			16M
+ * 0xe200_0000	PCIE1 IO		16M
+ * 0xe300_0000	PCIE2 IO		16M
  * 0xf800_0000	CCSRBAR			2M
  * 0xfe00_0000	FLASH (boot bank)	32M
  *
@@ -49,11 +49,11 @@ struct law_entry law_table[] = {
 	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
 		 LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
 #endif
-	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
 	SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
-	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
 	SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC),
 	SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
 };
diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c
index c4e98753249..54b2d0b166b 100644
--- a/board/sbc8641d/sbc8641d.c
+++ b/board/sbc8641d/sbc8641d.c
@@ -191,16 +191,16 @@ static struct pci_config_table pci_fsl86xxads_config_table[] = {
 };
 #endif
 
-static struct pci_controller pci1_hose = {
+static struct pci_controller pcie1_hose = {
 #ifndef CONFIG_PCI_PNP
 	config_table:pci_mpc86xxcts_config_table
 #endif
 };
 #endif /* CONFIG_PCI */
 
-#ifdef CONFIG_PCI2
-static struct pci_controller pci2_hose;
-#endif	/* CONFIG_PCI2 */
+#ifdef CONFIG_PCIE2
+static struct pci_controller pcie2_hose;
+#endif	/* CONFIG_PCIE2 */
 
 int first_free_busno = 0;
 
@@ -212,10 +212,10 @@ void pci_init_board(void)
 	uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL)
 		>> MPC8641_PORDEVSR_IO_SEL_SHIFT;
 
-#ifdef CONFIG_PCI1
+#ifdef CONFIG_PCIE1
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
-	struct pci_controller *hose = &pci1_hose;
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
+	struct pci_controller *hose = &pcie1_hose;
 	struct pci_region *r = hose->regions;
 #ifdef DEBUG
 	uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA)
@@ -236,16 +236,16 @@ void pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_MEM_BUS,
-			       CONFIG_SYS_PCI1_MEM_PHYS,
-			       CONFIG_SYS_PCI1_MEM_SIZE,
+			       CONFIG_SYS_PCIE1_MEM_BUS,
+			       CONFIG_SYS_PCIE1_MEM_PHYS,
+			       CONFIG_SYS_PCIE1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_IO_BUS,
-			       CONFIG_SYS_PCI1_IO_PHYS,
-			       CONFIG_SYS_PCI1_IO_SIZE,
+			       CONFIG_SYS_PCIE1_IO_BUS,
+			       CONFIG_SYS_PCIE1_IO_PHYS,
+			       CONFIG_SYS_PCIE1_IO_SIZE,
 			       PCI_REGION_IO);
 
 		hose->region_count = r - hose->regions;
@@ -264,26 +264,26 @@ void pci_init_board(void)
 }
 #else
 	puts("PCI-EXPRESS1: Disabled\n");
-#endif /* CONFIG_PCI1 */
+#endif /* CONFIG_PCIE1 */
 
-#ifdef CONFIG_PCI2
+#ifdef CONFIG_PCIE2
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR;
-	struct pci_controller *hose = &pci2_hose;
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
+	struct pci_controller *hose = &pcie2_hose;
 	struct pci_region *r = hose->regions;
 
 	/* outbound memory */
 	pci_set_region(r++,
-		       CONFIG_SYS_PCI2_MEM_BUS,
-		       CONFIG_SYS_PCI2_MEM_PHYS,
-		       CONFIG_SYS_PCI2_MEM_SIZE,
+		       CONFIG_SYS_PCIE2_MEM_BUS,
+		       CONFIG_SYS_PCIE2_MEM_PHYS,
+		       CONFIG_SYS_PCIE2_MEM_SIZE,
 		       PCI_REGION_MEM);
 
 	/* outbound io */
 	pci_set_region(r++,
-		       CONFIG_SYS_PCI2_IO_BUS,
-		       CONFIG_SYS_PCI2_IO_PHYS,
-		       CONFIG_SYS_PCI2_IO_SIZE,
+		       CONFIG_SYS_PCIE2_IO_BUS,
+		       CONFIG_SYS_PCIE2_IO_PHYS,
+		       CONFIG_SYS_PCIE2_IO_SIZE,
 		       PCI_REGION_IO);
 
 	hose->region_count = r - hose->regions;
@@ -298,7 +298,7 @@ void pci_init_board(void)
 }
 #else
 	puts("PCI-EXPRESS 2: Disabled\n");
-#endif /* CONFIG_PCI2 */
+#endif /* CONFIG_PCIE2 */
 
 }
 
@@ -308,12 +308,7 @@ void ft_board_setup (void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
 
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCI2
-	ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
-#endif
+	FT_FSL_PCI_SETUP;
 }
 #endif
 
diff --git a/board/siemens/common/fpga.c b/board/siemens/common/fpga.c
index 5660c09148e..ef8bfde7f1d 100644
--- a/board/siemens/common/fpga.c
+++ b/board/siemens/common/fpga.c
@@ -286,8 +286,7 @@ int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
     return 0;
 
  failure:
-    cmd_usage(cmdtp);
-    return 1;
+    return cmd_usage(cmdtp);
 }
 
 U_BOOT_CMD(
diff --git a/board/siemens/pcu_e/pcu_e.c b/board/siemens/pcu_e/pcu_e.c
index 14d75ea4296..97952844f94 100644
--- a/board/siemens/pcu_e/pcu_e.c
+++ b/board/siemens/pcu_e/pcu_e.c
@@ -399,8 +399,7 @@ int do_puma (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 	default:
 		break;
 	}
-	cmd_usage(cmdtp);
-	return 1;
+	return cmd_usage(cmdtp);
 }
 
 U_BOOT_CMD (puma, 4, 1, do_puma,
diff --git a/board/spear/common/spr_misc.c b/board/spear/common/spr_misc.c
index d99036bef3e..0562222ac82 100644
--- a/board/spear/common/spr_misc.c
+++ b/board/spear/common/spr_misc.c
@@ -215,10 +215,8 @@ int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	char *s, *e;
 	char i2c_mac[20];
 
-	if ((argc > 3) || (argc < 2)) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if ((argc > 3) || (argc < 2))
+		return cmd_usage(cmdtp);
 
 	if ((!strcmp(argv[1], "cpufreq")) || (!strcmp(argv[1], "ddrfreq"))) {
 
@@ -286,8 +284,7 @@ int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		return 0;
 	}
 
-	cmd_usage(cmdtp);
-	return 1;
+	return cmd_usage(cmdtp);
 }
 
 U_BOOT_CMD(chip_config, 3, 1, do_chip_config,
diff --git a/board/t3corp/chip_config.c b/board/t3corp/chip_config.c
index c00bf16bd97..98ab49f49fa 100644
--- a/board/t3corp/chip_config.c
+++ b/board/t3corp/chip_config.c
@@ -27,13 +27,27 @@
 
 struct ppc4xx_config ppc4xx_config_val[] = {
 	{
-		"600", "CPU: 600 PLB: 200 OPB: 100 EBC: 100",
+		"600-67", "CPU: 600 PLB: 200 OPB:  67 EBC:  67",
+		{
+			0x86, 0x80, 0xce, 0x1f, 0x7d, 0x80, 0x00, 0xe0,
+			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"600-100", "CPU: 600 PLB: 200 OPB: 100 EBC: 100",
 		{
 			0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0,
 			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
 		}
 	},
 	{
+		"667", "CPU: 667 PLB: 166 OPB:  83 EBC:  83",
+		{
+			0x06, 0x80, 0xbb, 0x14, 0x99, 0x82, 0x00, 0xa0,
+			0x40, 0x88, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
 		"800", "CPU: 800 PLB: 200 OPB: 100 EBC: 100",
 		{
 			0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0,
diff --git a/board/t3corp/init.S b/board/t3corp/init.S
index 4a4217fc8e8..ecd35ff7b6f 100644
--- a/board/t3corp/init.S
+++ b/board/t3corp/init.S
@@ -81,11 +81,13 @@ tlbtab:
 	tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x08010000, 0xc, AC_RW | SA_IG)
 
 	/* TLB-entry for FPGA(s) */
-	tlbentry(CONFIG_SYS_FPGA1_BASE, SZ_1M, CONFIG_SYS_FPGA1_BASE, 4,
+	tlbentry(CONFIG_SYS_FPGA1_BASE, SZ_16M, CONFIG_SYS_FPGA1_BASE, 4,
 		 AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_FPGA2_BASE, SZ_1M, CONFIG_SYS_FPGA2_BASE, 4,
+	tlbentry(CONFIG_SYS_FPGA1_BASE + (16 << 20), SZ_16M,
+		 CONFIG_SYS_FPGA1_BASE + (16 << 20), 4, AC_RW | SA_IG)
+	tlbentry(CONFIG_SYS_FPGA2_BASE, SZ_16M, CONFIG_SYS_FPGA2_BASE, 4,
 		 AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_FPGA3_BASE, SZ_1M, CONFIG_SYS_FPGA3_BASE, 4,
+	tlbentry(CONFIG_SYS_FPGA3_BASE, SZ_16M, CONFIG_SYS_FPGA3_BASE, 4,
 		 AC_RW | SA_IG)
 
 	/* TLB-entry for OCM */
diff --git a/board/t3corp/t3corp.c b/board/t3corp/t3corp.c
index 8ffa321690c..ddf58970a38 100644
--- a/board/t3corp/t3corp.c
+++ b/board/t3corp/t3corp.c
@@ -45,7 +45,7 @@ int board_early_init_f(void)
 	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
 	mtdcr(UIC1ER, 0x00000000);	/* disable all */
 	mtdcr(UIC1CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC1PR, 0xffffffff);	/* per ref-board manual */
+	mtdcr(UIC1PR, 0x7fffffff);	/* per ref-board manual */
 	mtdcr(UIC1TR, 0x00000000);	/* per ref-board manual */
 	mtdcr(UIC1VR, 0x00000000);	/* int31 highest, base=0x000 */
 	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
diff --git a/board/tqc/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c
index 0db705049ff..0789c5848eb 100644
--- a/board/tqc/tqm5200/cmd_stk52xx.c
+++ b/board/tqc/tqm5200/cmd_stk52xx.c
@@ -327,8 +327,7 @@ static int cmd_sound(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	switch (argc) {
 	case 0:
 	case 1:
-		cmd_usage(cmdtp);
-		return 1;
+		return cmd_usage(cmdtp);
 	case 2:
 		if (strncmp(argv[1],"saw",3) == 0) {
 			printf ("Play sawtooth\n");
@@ -342,8 +341,7 @@ static int cmd_sound(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			return rcode;
 		}
 
-		cmd_usage(cmdtp);
-		return 1;
+		return cmd_usage(cmdtp);
 	case 3:
 		if (strncmp(argv[1],"saw",3) == 0) {
 			duration = simple_strtoul(argv[2], NULL, 10);
@@ -358,8 +356,7 @@ static int cmd_sound(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 						LEFT_RIGHT);
 			return rcode;
 		}
-		cmd_usage(cmdtp);
-		return 1;
+		return cmd_usage(cmdtp);
 	case 4:
 		if (strncmp(argv[1],"saw",3) == 0) {
 			duration = simple_strtoul(argv[2], NULL, 10);
@@ -382,8 +379,7 @@ static int cmd_sound(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			pcm1772_write_reg((uchar)reg, (uchar)val);
 			return 0;
 		}
-		cmd_usage(cmdtp);
-		return 1;
+		return cmd_usage(cmdtp);
 	case 5:
 		if (strncmp(argv[1],"saw",3) == 0) {
 			duration = simple_strtoul(argv[2], NULL, 10);
@@ -412,8 +408,7 @@ static int cmd_sound(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 						channel);
 			return rcode;
 		}
-		cmd_usage(cmdtp);
-		return 1;
+		return cmd_usage(cmdtp);
 	}
 	printf ("Usage:\nsound cmd [arg1] [arg2] ...\n");
 	return 1;
@@ -513,8 +508,7 @@ static int cmd_beep(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			channel = LEFT_RIGHT;
 		break;
 	default:
-		cmd_usage(cmdtp);
-		return 1;
+		return cmd_usage(cmdtp);
 	}
 
 	if ((tmp = getenv ("volume")) != NULL) {
diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c
index fc2a6cbdb54..dda2cb6ed10 100644
--- a/board/tqc/tqm85xx/tqm85xx.c
+++ b/board/tqc/tqm85xx/tqm85xx.c
@@ -687,12 +687,7 @@ void ft_board_setup (void *blob, bd_t *bd)
 {
 	ft_cpu_setup (blob, bd);
 
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
-#endif
+	FT_FSL_PCI_SETUP;
 }
 #endif /* CONFIG_OF_BOARD_SETUP */
 
diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c
index 6d23470f84b..ca4415c0b92 100644
--- a/board/trab/cmd_trab.c
+++ b/board/trab/cmd_trab.c
@@ -167,10 +167,8 @@ int do_burn_in (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	int i;
 	int cycle_status;
 
-	if (argc > 1) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc > 1)
+		return cmd_usage(cmdtp);
 
 	led_init ();
 	global_vars_init ();
@@ -270,14 +268,11 @@ int do_dip (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int i, dip;
 
-	if (argc > 1) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc > 1)
+		return cmd_usage(cmdtp);
 
-	if ((dip = read_dip ()) == -1) {
+	if ((dip = read_dip ()) == -1)
 		return 1;
-	}
 
 	for (i = 0; i < 4; i++) {
 		if ((dip & (1 << i)) == 0)
@@ -303,14 +298,11 @@ int do_vcc5v (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int vcc5v;
 
-	if (argc > 1) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc > 1)
+		return cmd_usage(cmdtp);
 
-	if ((vcc5v = read_vcc5v ()) == -1) {
+	if ((vcc5v = read_vcc5v ()) == -1)
 		return (1);
-	}
 
 	printf ("%d", (vcc5v / 1000));
 	printf (".%d", (vcc5v % 1000) / 100);
@@ -331,10 +323,8 @@ int do_contact_temp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int contact_temp;
 
-	if (argc > 1) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc > 1)
+		return cmd_usage(cmdtp);
 
 	tsc2000_spi_init ();
 
@@ -354,36 +344,32 @@ U_BOOT_CMD(
 
 int do_burn_in_status (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	if (argc > 1) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc > 1)
+		return cmd_usage(cmdtp);
 
 	if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_STATUS, 1,
-				(unsigned char*) &status, 1)) {
+				(unsigned char*) &status, 1))
 		return (1);
-	}
+
 	if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_PASS_CYCLES, 1,
-				(unsigned char*) &pass_cycles, 2)) {
+				(unsigned char*) &pass_cycles, 2))
 		return (1);
-	}
+
 	if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_FIRST_ERROR_CYCLE,
-				1, (unsigned char*) &first_error_cycle, 2)) {
+				1, (unsigned char*) &first_error_cycle, 2))
 		return (1);
-	}
+
 	if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_FIRST_ERROR_NUM,
-				1, (unsigned char*) &first_error_num, 1)) {
+				1, (unsigned char*) &first_error_num, 1))
 		return (1);
-	}
+
 	if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_FIRST_ERROR_NAME,
 			       1, (unsigned char*)first_error_name,
-			       sizeof (first_error_name))) {
+			       sizeof (first_error_name)))
 		return (1);
-	}
 
-	if (read_max_cycles () != 0) {
+	if (read_max_cycles () != 0)
 		return (1);
-	}
 
 	printf ("max_cycles = %d\n", max_cycles);
 	printf ("status = %d\n", status);
@@ -850,14 +836,11 @@ int do_temp_log (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	struct rtc_time tm;
 #endif
 
-	if (argc > 2) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc > 2)
+		return cmd_usage(cmdtp);
 
-	if (argc > 1) {
+	if (argc > 1)
 		delay = simple_strtoul(argv[1], NULL, 10);
-	}
 
 	tsc2000_spi_init ();
 	while (1) {
diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c
index fede2e07747..fd623df25f2 100644
--- a/board/trizepsiv/eeprom.c
+++ b/board/trizepsiv/eeprom.c
@@ -42,36 +42,29 @@ static int do_read_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *
 static int do_write_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) {
 	int offset,value;
 
-	if (argc < 4) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc < 4)
+		return cmd_usage(cmdtp);
 
 	offset=simple_strtoul(argv[2],NULL,16);
 	value=simple_strtoul(argv[3],NULL,16);
 	if (offset > 0x40) {
 		printf("Wrong offset : 0x%x\n",offset);
-		cmd_usage(cmdtp);
-		return 1;
+		return cmd_usage(cmdtp);
 	}
 	dm9000_write_srom_word(offset, value);
 	return (0);
 }
 
 int do_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) {
-	if (argc < 2) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc < 2)
+		return cmd_usage(cmdtp);
 
-	if (strcmp (argv[1],"read") == 0) {
+	if (strcmp (argv[1],"read") == 0)
 		return (do_read_dm9000_eeprom(cmdtp,flag,argc,argv));
-	} else if (strcmp (argv[1],"write") == 0) {
+	else if (strcmp (argv[1],"write") == 0)
 		return (do_write_dm9000_eeprom(cmdtp,flag,argc,argv));
-	} else {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	else
+		return cmd_usage(cmdtp);
 }
 
 U_BOOT_CMD(
diff --git a/board/w7o/cmd_vpd.c b/board/w7o/cmd_vpd.c
index 44d40eed287..cab9881ad8c 100644
--- a/board/w7o/cmd_vpd.c
+++ b/board/w7o/cmd_vpd.c
@@ -38,10 +38,8 @@ int do_vpd (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 	uchar dev_addr = CONFIG_SYS_DEF_EEPROM_ADDR;
 
 	/* Validate usage */
-	if (argc > 2) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
+	if (argc > 2)
+		return cmd_usage(cmdtp);
 
 	/* Passed in EEPROM address */
 	if (argc == 2)
diff --git a/board/xes/common/fsl_8xxx_pci.c b/board/xes/common/fsl_8xxx_pci.c
index 3a8182715be..ece78825778 100644
--- a/board/xes/common/fsl_8xxx_pci.c
+++ b/board/xes/common/fsl_8xxx_pci.c
@@ -398,18 +398,6 @@ void pci_init_board(void)
 #if defined(CONFIG_OF_BOARD_SETUP)
 void ft_board_pci_setup(void *blob, bd_t *bd)
 {
-	/* TODO - make node name (eg pci0) dynamic */
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
-#endif
-#ifdef CONFIG_PCIE2
-	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
-#endif
-#ifdef CONFIG_PCIE3
-	ft_fsl_pci_setup(blob, "pci0", &pcie3_hose);
-#endif
+	FT_FSL_PCI_SETUP;
 }
 #endif /* CONFIG_OF_BOARD_SETUP */