Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'

22 files changed, 138 insertions, 4304 deletions

diff --git a/board/samsung/smdk5250/smdk5250-uboot-spl.lds b/board/samsung/common/exynos-uboot-spl.lds
index c0a76020895..c0a76020895 100644
--- a/board/samsung/smdk5250/smdk5250-uboot-spl.lds
+++ b/board/samsung/common/exynos-uboot-spl.lds
diff --git a/board/samsung/dts/exynos5250-smdk5250.dts b/board/samsung/dts/exynos5250-smdk5250.dts
index 93375a64b2f..80ffe3047ab 100644
--- a/board/samsung/dts/exynos5250-smdk5250.dts
+++ b/board/samsung/dts/exynos5250-smdk5250.dts
@@ -34,6 +34,8 @@
 		mmc1 = "/mmc@12210000";
 		mmc2 = "/mmc@12220000";
 		mmc3 = "/mmc@12230000";
+		serial0 = "/serial@12C30000";
+		console = "/serial@12C30000";
 	};
 
 	sromc@12250000 {
diff --git a/board/samsung/dts/exynos5250-snow.dts b/board/samsung/dts/exynos5250-snow.dts
index 24658c1989b..fdc047a1425 100644
--- a/board/samsung/dts/exynos5250-snow.dts
+++ b/board/samsung/dts/exynos5250-snow.dts
@@ -30,6 +30,12 @@
 		spi2 = "/spi@12d40000";
 		spi3 = "/spi@131a0000";
 		spi4 = "/spi@131b0000";
+		mmc0 = "/mmc@12200000";
+		mmc1 = "/mmc@12210000";
+		mmc2 = "/mmc@12220000";
+		mmc3 = "/mmc@12230000";
+		serial0 = "/serial@12C30000";
+		console = "/serial@12C30000";
 	};
 
 	sound@12d60000 {
@@ -56,6 +62,26 @@
 		};
 	};
 
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		samsung,removable = <0>;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		samsung,removable = <1>;
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
+
 	tmu@10060000 {
 		samsung,min-temp	= <25>;
 		samsung,max-temp	= <125>;
diff --git a/board/samsung/origen/Makefile b/board/samsung/origen/Makefile
index 3a885a5cdb2..63c8b468318 100644
--- a/board/samsung/origen/Makefile
+++ b/board/samsung/origen/Makefile
@@ -24,19 +24,12 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
-SOBJS	:= mem_setup.o
-SOBJS	+= lowlevel_init.o
-
 ifndef CONFIG_SPL_BUILD
 COBJS	+= origen.o
 endif
 
-ifdef CONFIG_SPL_BUILD
-COBJS	+= mmc_boot.o
-endif
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
 
 ALL	+=$(obj).depend $(LIB)
 
diff --git a/board/samsung/origen/lowlevel_init.S b/board/samsung/origen/lowlevel_init.S
deleted file mode 100644
index be9d418265c..00000000000
--- a/board/samsung/origen/lowlevel_init.S
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
- * Lowlevel setup for ORIGEN board based on EXYNOS4210
- *
- * Copyright (C) 2011 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/cpu.h>
-#include "origen_setup.h"
-/*
- * Register usages:
- *
- * r5 has zero always
- * r7 has GPIO part1 base 0x11400000
- * r6 has GPIO part2 base 0x11000000
- */
-
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE
-
-	.globl lowlevel_init
-lowlevel_init:
-	push	{lr}
-
-	/* r5 has always zero */
-	mov	r5, #0
-	ldr	r7, =EXYNOS4_GPIO_PART1_BASE
-	ldr	r6, =EXYNOS4_GPIO_PART2_BASE
-
-	/* check reset status */
-	ldr	r0, =(EXYNOS4_POWER_BASE + INFORM1_OFFSET)
-	ldr	r1, [r0]
-
-	/* AFTR wakeup reset */
-	ldr	r2, =S5P_CHECK_DIDLE
-	cmp	r1, r2
-	beq	exit_wakeup
-
-	/* LPA wakeup reset */
-	ldr	r2, =S5P_CHECK_LPA
-	cmp	r1, r2
-	beq	exit_wakeup
-
-	/* Sleep wakeup reset */
-	ldr	r2, =S5P_CHECK_SLEEP
-	cmp	r1, r2
-	beq	wakeup_reset
-
-	/*
-	 * If U-boot is already running in ram, no need to relocate U-Boot.
-	 * Memory controller must be configured before relocating U-Boot
-	 * in ram.
-	 */
-	ldr	r0, =0x0ffffff		/* r0 <- Mask Bits*/
-	bic	r1, pc, r0		/* pc <- current addr of code */
-					/* r1 <- unmasked bits of pc */
-	ldr	r2, _TEXT_BASE		/* r2 <- original base addr in ram */
-	bic	r2, r2, r0		/* r2 <- unmasked bits of r2*/
-	cmp	r1, r2			/* compare r1, r2 */
-	beq	1f			/* r0 == r1 then skip sdram init */
-
-	/* init system clock */
-	bl system_clock_init
-
-	/* Memory initialize */
-	bl mem_ctrl_asm_init
-
-1:
-	/* for UART */
-	bl uart_asm_init
-	bl arch_cpu_init
-	bl tzpc_init
-	pop	{pc}
-
-wakeup_reset:
-	bl system_clock_init
-	bl mem_ctrl_asm_init
-	bl arch_cpu_init
-	bl tzpc_init
-
-exit_wakeup:
-	/* Load return address and jump to kernel */
-	ldr	r0, =(EXYNOS4_POWER_BASE + INFORM0_OFFSET)
-
-	/* r1 = physical address of exynos4210_cpu_resume function */
-	ldr	r1, [r0]
-
-	/* Jump to kernel*/
-	mov	pc, r1
-	nop
-	nop
-
-/*
- * system_clock_init: Initialize core clock and bus clock.
- * void system_clock_init(void)
- */
-system_clock_init:
-	push	{lr}
-	ldr	r0, =EXYNOS4_CLOCK_BASE
-
-	/* APLL(1), MPLL(1), CORE(0), HPM(0) */
-	ldr	r1, =CLK_SRC_CPU_VAL
-	ldr	r2, =CLK_SRC_CPU_OFFSET
-	str	r1, [r0, r2]
-
-	/* wait ?us */
-	mov	r1, #0x10000
-2:	subs	r1, r1, #1
-	bne	2b
-
-	ldr	r1, =CLK_SRC_TOP0_VAL
-	ldr	r2, =CLK_SRC_TOP0_OFFSET
-	str	r1, [r0, r2]
-
-	ldr	r1, =CLK_SRC_TOP1_VAL
-	ldr	r2, =CLK_SRC_TOP1_OFFSET
-	str	r1, [r0, r2]
-
-	/* DMC */
-	ldr	r1, =CLK_SRC_DMC_VAL
-	ldr	r2, =CLK_SRC_DMC_OFFSET
-	str	r1, [r0, r2]
-
-	/*CLK_SRC_LEFTBUS */
-	ldr	r1, =CLK_SRC_LEFTBUS_VAL
-	ldr	r2, =CLK_SRC_LEFTBUS_OFFSET
-	str	r1, [r0, r2]
-
-	/*CLK_SRC_RIGHTBUS */
-	ldr	r1, =CLK_SRC_RIGHTBUS_VAL
-	ldr	r2, =CLK_SRC_RIGHTBUS_OFFSET
-	str	r1, [r0, r2]
-
-	/* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
-	ldr	r1, =CLK_SRC_FSYS_VAL
-	ldr	r2, =CLK_SRC_FSYS_OFFSET
-	str	r1, [r0, r2]
-
-	/* UART[0:4] */
-	ldr	r1, =CLK_SRC_PERIL0_VAL
-	ldr	r2, =CLK_SRC_PERIL0_OFFSET
-	str	r1, [r0, r2]
-
-	/* CAM , FIMC 0-3 */
-	ldr	r1, =CLK_SRC_CAM_VAL
-	ldr	r2, =CLK_SRC_CAM_OFFSET
-	str	r1, [r0, r2]
-
-	/* MFC */
-	ldr	r1, =CLK_SRC_MFC_VAL
-	ldr	r2, =CLK_SRC_MFC_OFFSET
-	str	r1, [r0, r2]
-
-	/* G3D */
-	ldr	r1, =CLK_SRC_G3D_VAL
-	ldr	r2, =CLK_SRC_G3D_OFFSET
-	str	r1, [r0, r2]
-
-	/* LCD0 */
-	ldr	r1, =CLK_SRC_LCD0_VAL
-	ldr	r2, =CLK_SRC_LCD0_OFFSET
-	str	r1, [r0, r2]
-
-	/* wait ?us */
-	mov	r1, #0x10000
-3:	subs	r1, r1, #1
-	bne	3b
-
-	/* CLK_DIV_CPU0 */
-	ldr	r1, =CLK_DIV_CPU0_VAL
-	ldr	r2, =CLK_DIV_CPU0_OFFSET
-	str	r1, [r0, r2]
-
-	/* CLK_DIV_CPU1 */
-	ldr	r1, =CLK_DIV_CPU1_VAL
-	ldr	r2, =CLK_DIV_CPU1_OFFSET
-	str	r1, [r0, r2]
-
-	/* CLK_DIV_DMC0 */
-	ldr	r1, =CLK_DIV_DMC0_VAL
-	ldr	r2, =CLK_DIV_DMC0_OFFSET
-	str	r1, [r0, r2]
-
-	/*CLK_DIV_DMC1 */
-	ldr	r1, =CLK_DIV_DMC1_VAL
-	ldr	r2, =CLK_DIV_DMC1_OFFSET
-	str	r1, [r0, r2]
-
-	/* CLK_DIV_LEFTBUS */
-	ldr	r1, =CLK_DIV_LEFTBUS_VAL
-	ldr	r2, =CLK_DIV_LEFTBUS_OFFSET
-	str	r1, [r0, r2]
-
-	/* CLK_DIV_RIGHTBUS */
-	ldr	r1, =CLK_DIV_RIGHTBUS_VAL
-	ldr	r2, =CLK_DIV_RIGHTBUS_OFFSET
-	str	r1, [r0, r2]
-
-	/* CLK_DIV_TOP */
-	ldr	r1, =CLK_DIV_TOP_VAL
-	ldr	r2, =CLK_DIV_TOP_OFFSET
-	str	r1, [r0, r2]
-
-	/* MMC[0:1] */
-	ldr	r1, =CLK_DIV_FSYS1_VAL		/* 800(MPLL) / (15 + 1) */
-	ldr	r2, =CLK_DIV_FSYS1_OFFSET
-	str	r1, [r0, r2]
-
-	/* MMC[2:3] */
-	ldr	r1, =CLK_DIV_FSYS2_VAL		/* 800(MPLL) / (15 + 1) */
-	ldr	r2, =CLK_DIV_FSYS2_OFFSET
-	str	r1, [r0, r2]
-
-	/* MMC4 */
-	ldr	r1, =CLK_DIV_FSYS3_VAL		/* 800(MPLL) / (15 + 1) */
-	ldr	r2, =CLK_DIV_FSYS3_OFFSET
-	str	r1, [r0, r2]
-
-	/* CLK_DIV_PERIL0: UART Clock Divisors */
-	ldr	r1, =CLK_DIV_PERIL0_VAL
-	ldr	r2, =CLK_DIV_PERIL0_OFFSET
-	str	r1, [r0, r2]
-
-	/* CAM, FIMC 0-3: CAM Clock Divisors */
-	ldr	r1, =CLK_DIV_CAM_VAL
-	ldr	r2, =CLK_DIV_CAM_OFFSET
-	str	r1, [r0, r2]
-
-	/* CLK_DIV_MFC: MFC Clock Divisors */
-	ldr	r1, =CLK_DIV_MFC_VAL
-	ldr	r2, =CLK_DIV_MFC_OFFSET
-	str	r1, [r0, r2]
-
-	/* CLK_DIV_G3D: G3D Clock Divisors */
-	ldr	r1, =CLK_DIV_G3D_VAL
-	ldr	r2, =CLK_DIV_G3D_OFFSET
-	str	r1, [r0, r2]
-
-	/* CLK_DIV_LCD0: LCD0 Clock Divisors */
-	ldr	r1, =CLK_DIV_LCD0_VAL
-	ldr	r2, =CLK_DIV_LCD0_OFFSET
-	str	r1, [r0, r2]
-
-	/* Set PLL locktime */
-	ldr	r1, =PLL_LOCKTIME
-	ldr	r2, =APLL_LOCK_OFFSET
-	str	r1, [r0, r2]
-
-	ldr	r1, =PLL_LOCKTIME
-	ldr	r2, =MPLL_LOCK_OFFSET
-	str	r1, [r0, r2]
-
-	ldr	r1, =PLL_LOCKTIME
-	ldr	r2, =EPLL_LOCK_OFFSET
-	str	r1, [r0, r2]
-
-	ldr	r1, =PLL_LOCKTIME
-	ldr	r2, =VPLL_LOCK_OFFSET
-	str	r1, [r0, r2]
-
-	/* APLL_CON1 */
-	ldr	r1, =APLL_CON1_VAL
-	ldr	r2, =APLL_CON1_OFFSET
-	str	r1, [r0, r2]
-
-	/* APLL_CON0 */
-	ldr	r1, =APLL_CON0_VAL
-	ldr	r2, =APLL_CON0_OFFSET
-	str	r1, [r0, r2]
-
-	/* MPLL_CON1 */
-	ldr	r1, =MPLL_CON1_VAL
-	ldr	r2, =MPLL_CON1_OFFSET
-	str	r1, [r0, r2]
-
-	/* MPLL_CON0 */
-	ldr	r1, =MPLL_CON0_VAL
-	ldr	r2, =MPLL_CON0_OFFSET
-	str	r1, [r0, r2]
-
-	/* EPLL */
-	ldr	r1, =EPLL_CON1_VAL
-	ldr	r2, =EPLL_CON1_OFFSET
-	str	r1, [r0, r2]
-
-	/* EPLL_CON0 */
-	ldr	r1, =EPLL_CON0_VAL
-	ldr	r2, =EPLL_CON0_OFFSET
-	str	r1, [r0, r2]
-
-	/* VPLL_CON1 */
-	ldr	r1, =VPLL_CON1_VAL
-	ldr	r2, =VPLL_CON1_OFFSET
-	str	r1, [r0, r2]
-
-	/* VPLL_CON0 */
-	ldr	r1, =VPLL_CON0_VAL
-	ldr	r2, =VPLL_CON0_OFFSET
-	str	r1, [r0, r2]
-
-	/* wait ?us */
-	mov	r1, #0x30000
-4:	subs	r1, r1, #1
-	bne	4b
-
-	pop	{pc}
-/*
- * uart_asm_init: Initialize UART in asm mode, 115200bps fixed.
- * void uart_asm_init(void)
- */
-	.globl uart_asm_init
-uart_asm_init:
-
-	/* setup UART0-UART3 GPIOs (part1) */
-	mov	r0, r7
-	ldr	r1, =EXYNOS4_GPIO_A0_CON_VAL
-	str	r1, [r0, #EXYNOS4_GPIO_A0_CON_OFFSET]
-	ldr	r1, =EXYNOS4_GPIO_A1_CON_VAL
-	str	r1, [r0, #EXYNOS4_GPIO_A1_CON_OFFSET]
-
-	ldr r0, =EXYNOS4_UART_BASE
-	add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET
-
-	ldr	r1, =ULCON_VAL
-	str	r1, [r0, #ULCON_OFFSET]
-	ldr	r1, =UCON_VAL
-	str	r1, [r0, #UCON_OFFSET]
-	ldr	r1, =UFCON_VAL
-	str	r1, [r0, #UFCON_OFFSET]
-	ldr	r1, =UBRDIV_VAL
-	str	r1, [r0, #UBRDIV_OFFSET]
-	ldr	r1, =UFRACVAL_VAL
-	str	r1, [r0, #UFRACVAL_OFFSET]
-	mov	pc, lr
-	nop
-	nop
-	nop
-
diff --git a/board/samsung/origen/mem_setup.S b/board/samsung/origen/mem_setup.S
deleted file mode 100644
index b49b193a79a..00000000000
--- a/board/samsung/origen/mem_setup.S
+++ /dev/null
@@ -1,421 +0,0 @@
-/*
- * Memory setup for ORIGEN board based on EXYNOS4210
- *
- * Copyright (C) 2011 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include "origen_setup.h"
-#define SET_MIU
-
-	.globl mem_ctrl_asm_init
-mem_ctrl_asm_init:
-	/*
-	 * Async bridge configuration at CPU_core:
-	 * 1: half_sync
-	 * 0: full_sync
-	 */
-	ldr r0, =ASYNC_CONFIG
-	mov r1, #1
-	str r1, [r0]
-
-#ifdef SET_MIU
-	ldr	r0, =EXYNOS4_MIU_BASE
-	/* Interleave: 2Bit, Interleave_bit1: 0x21, Interleave_bit2: 0x7 */
-	ldr	r1, =0x20001507
-	str	r1, [r0, #APB_SFR_INTERLEAVE_CONF_OFFSET]
-
-	/* Update MIU Configuration */
-	ldr	r1, =0x00000001
-	str	r1, [r0, #APB_SFR_ARBRITATION_CONF_OFFSET]
-#endif
-	/* DREX0 */
-	ldr	r0, =EXYNOS4_DMC0_BASE
-
-	/*
-	 * DLL Parameter Setting:
-	 * Termination: Enable R/W
-	 * Phase Delay for DQS Cleaning: 180' Shift
-	 */
-	ldr	r1, =0xe0000086
-	str	r1, [r0, #DMC_PHYCONTROL1]
-
-	/*
-	 * ZQ Calibration
-	 * Termination: Disable
-	 * Auto Calibration Start: Enable
-	 */
-	ldr	r1, =0xE3855703
-	str	r1, [r0, #DMC_PHYZQCONTROL]
-
-	/* Wait ?us*/
-	mov	r2, #0x100000
-1:	subs	r2, r2, #1
-	bne	1b
-
-	/*
-	 * Update DLL Information:
-	 * Force DLL Resyncronization
-	 */
-	ldr	r1, =0xe000008e
-	str	r1, [r0, #DMC_PHYCONTROL1]
-
-	/* Reset Force DLL Resyncronization */
-	ldr	r1, =0xe0000086
-	str	r1, [r0, #DMC_PHYCONTROL1]
-
-	/* Enable Differential DQS, DLL Off*/
-	ldr	r1, =0x71101008
-	str	r1, [r0, #DMC_PHYCONTROL0]
-
-	/* Activate PHY DLL: DLL On */
-	ldr	r1, =0x7110100A
-	str	r1, [r0, #DMC_PHYCONTROL0]
-
-	/* Set DLL Parameters */
-	ldr	r1, =0xe0000086
-	str	r1, [r0, #DMC_PHYCONTROL1]
-
-	/* DLL Start */
-	ldr	r1, =0x7110100B
-	str	r1, [r0, #DMC_PHYCONTROL0]
-
-	ldr	r1, =0x00000000
-	str	r1, [r0, #DMC_PHYCONTROL2]
-
-	/* Set Clock Ratio of Bus clock to Memory Clock */
-	ldr	r1, =0x0FFF301a
-	str	r1, [r0, #DMC_CONCONTROL]
-
-	/*
-	 * Memor Burst length: 8
-	 * Number of chips: 2
-	 * Memory Bus width: 32 bit
-	 * Memory Type: DDR3
-	 * Additional Latancy for PLL: 1 Cycle
-	 */
-	ldr	r1, =0x00312640
-	str	r1, [r0, #DMC_MEMCONTROL]
-
-	/*
-	 * Memory Configuration Chip 0
-	 * Address Mapping: Interleaved
-	 * Number of Column address Bits: 10 bits
-	 * Number of Rows Address Bits: 14
-	 * Number of Banks: 8
-	 */
-	ldr	r1, =0x20e01323
-	str	r1, [r0, #DMC_MEMCONFIG0]
-
-	/*
-	 * Memory Configuration Chip 1
-	 * Address Mapping: Interleaved
-	 * Number of Column address Bits: 10 bits
-	 * Number of Rows Address Bits: 14
-	 * Number of Banks: 8
-	 */
-	ldr	r1, =0x40e01323
-	str	r1, [r0, #DMC_MEMCONFIG1]
-
-	/* Config Precharge Policy */
-	ldr	r1, =0xff000000
-	str	r1, [r0, #DMC_PRECHCONFIG]
-
-	/*
-	 * TimingAref, TimingRow, TimingData, TimingPower Setting:
-	 * Values as per Memory AC Parameters
-	 */
-	ldr	r1, =0x000000BB
-	str	r1, [r0, #DMC_TIMINGAREF]
-	ldr	r1, =0x4046654f
-	str	r1, [r0, #DMC_TIMINGROW]
-	ldr	r1, =0x46400506
-	str	r1, [r0, #DMC_TIMINGDATA]
-	ldr	r1, =0x52000A3C
-	str	r1, [r0, #DMC_TIMINGPOWER]
-
-	/* Chip0: NOP Command: Assert and Hold CKE to high level */
-	ldr	r1, =0x07000000
-	str	r1, [r0, #DMC_DIRECTCMD]
-
-	/* Wait ?us*/
-	mov	r2, #0x100000
-2:	subs	r2, r2, #1
-	bne	2b
-
-	/* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
-	ldr	r1, =0x00020000
-	str	r1, [r0, #DMC_DIRECTCMD]
-	ldr	r1, =0x00030000
-	str	r1, [r0, #DMC_DIRECTCMD]
-	ldr	r1, =0x00010002
-	str	r1, [r0, #DMC_DIRECTCMD]
-	ldr	r1, =0x00000328
-	str	r1, [r0, #DMC_DIRECTCMD]
-
-	/* Wait ?us*/
-	mov	r2, #0x100000
-3:	subs	r2, r2, #1
-	bne	3b
-
-	/* Chip0: ZQINIT */
-	ldr	r1, =0x0a000000
-	str	r1, [r0, #DMC_DIRECTCMD]
-
-	/* Wait ?us*/
-	mov	r2, #0x100000
-4:	subs	r2, r2, #1
-	bne	4b
-
-	/* Chip1: NOP Command: Assert and Hold CKE to high level */
-	ldr	r1, =0x07100000
-	str	r1, [r0, #DMC_DIRECTCMD]
-
-	/* Wait ?us*/
-	mov	r2, #0x100000
-5:	subs	r2, r2, #1
-	bne	5b
-
-	/* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
-	ldr	r1, =0x00120000
-	str	r1, [r0, #DMC_DIRECTCMD]
-	ldr	r1, =0x00130000
-	str	r1, [r0, #DMC_DIRECTCMD]
-	ldr	r1, =0x00110002
-	str	r1, [r0, #DMC_DIRECTCMD]
-	ldr	r1, =0x00100328
-	str	r1, [r0, #DMC_DIRECTCMD]
-
-	/* Wait ?us*/
-	mov	r2, #0x100000
-6:	subs	r2, r2, #1
-	bne	6b
-
-	/* Chip1: ZQINIT */
-	ldr	r1, =0x0a100000
-	str	r1, [r0, #DMC_DIRECTCMD]
-
-	/* Wait ?us*/
-	mov	r2, #0x100000
-7:	subs	r2, r2, #1
-	bne	7b
-
-	ldr	r1, =0xe000008e
-	str	r1, [r0, #DMC_PHYCONTROL1]
-	ldr	r1, =0xe0000086
-	str	r1, [r0, #DMC_PHYCONTROL1]
-
-	/* Wait ?us*/
-	mov	r2, #0x100000
-8:	subs	r2, r2, #1
-	bne	8b
-
-	/* DREX1 */
-	ldr	r0, =EXYNOS4_DMC1_BASE	@0x10410000
-
-	/*
-	 * DLL Parameter Setting:
-	 * Termination: Enable R/W
-	 * Phase Delay for DQS Cleaning: 180' Shift
-	 */
-	ldr	r1, =0xe0000086
-	str	r1, [r0, #DMC_PHYCONTROL1]
-
-	/*
-	 * ZQ Calibration:
-	 * Termination: Disable
-	 * Auto Calibration Start: Enable
-	 */
-	ldr	r1, =0xE3855703
-	str	r1, [r0, #DMC_PHYZQCONTROL]
-
-	/* Wait ?us*/
-	mov	r2, #0x100000
-1:	subs	r2, r2, #1
-	bne	1b
-
-	/*
-	 * Update DLL Information:
-	 * Force DLL Resyncronization
-	 */
-	ldr	r1, =0xe000008e
-	str	r1, [r0, #DMC_PHYCONTROL1]
-
-	/* Reset Force DLL Resyncronization */
-	ldr	r1, =0xe0000086
-	str	r1, [r0, #DMC_PHYCONTROL1]
-
-	/* Enable Differential DQS, DLL Off*/
-	ldr	r1, =0x71101008
-	str	r1, [r0, #DMC_PHYCONTROL0]
-
-	/* Activate PHY DLL: DLL On */
-	ldr	r1, =0x7110100A
-	str	r1, [r0, #DMC_PHYCONTROL0]
-
-	/* Set DLL Parameters */
-	ldr	r1, =0xe0000086
-	str	r1, [r0, #DMC_PHYCONTROL1]
-
-	/* DLL Start */
-	ldr	r1, =0x7110100B
-	str	r1, [r0, #DMC_PHYCONTROL0]
-
-	ldr	r1, =0x00000000
-	str	r1, [r0, #DMC_PHYCONTROL2]
-
-	/* Set Clock Ratio of Bus clock to Memory Clock */
-	ldr	r1, =0x0FFF301a
-	str	r1, [r0, #DMC_CONCONTROL]
-
-	/*
-	 * Memor Burst length: 8
-	 * Number of chips: 2
-	 * Memory Bus width: 32 bit
-	 * Memory Type: DDR3
-	 * Additional Latancy for PLL: 1 Cycle
-	 */
-	ldr	r1, =0x00312640
-	str	r1, [r0, #DMC_MEMCONTROL]
-
-	/*
-	 * Memory Configuration Chip 0
-	 * Address Mapping: Interleaved
-	 * Number of Column address Bits: 10 bits
-	 * Number of Rows Address Bits: 14
-	 * Number of Banks: 8
-	 */
-	ldr	r1, =0x20e01323
-	str	r1, [r0, #DMC_MEMCONFIG0]
-
-	/*
-	 * Memory Configuration Chip 1
-	 * Address Mapping: Interleaved
-	 * Number of Column address Bits: 10 bits
-	 * Number of Rows Address Bits: 14
-	 * Number of Banks: 8
-	 */
-	ldr	r1, =0x40e01323
-	str	r1, [r0, #DMC_MEMCONFIG1]
-
-	/* Config Precharge Policy */
-	ldr	r1, =0xff000000
-	str	r1, [r0, #DMC_PRECHCONFIG]
-
-	/*
-	 * TimingAref, TimingRow, TimingData, TimingPower Setting:
-	 * Values as per Memory AC Parameters
-	 */
-	ldr	r1, =0x000000BB
-	str	r1, [r0, #DMC_TIMINGAREF]
-	ldr	r1, =0x4046654f
-	str	r1, [r0, #DMC_TIMINGROW]
-	ldr	r1, =0x46400506
-	str	r1, [r0, #DMC_TIMINGDATA]
-	ldr	r1, =0x52000A3C
-	str	r1, [r0, #DMC_TIMINGPOWER]
-
-	/* Chip0: NOP Command: Assert and Hold CKE to high level */
-	ldr	r1, =0x07000000
-	str	r1, [r0, #DMC_DIRECTCMD]
-
-	/* Wait ?us*/
-	mov	r2, #0x100000
-2:	subs	r2, r2, #1
-	bne	2b
-
-	/* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
-	ldr	r1, =0x00020000
-	str	r1, [r0, #DMC_DIRECTCMD]
-	ldr	r1, =0x00030000
-	str	r1, [r0, #DMC_DIRECTCMD]
-	ldr	r1, =0x00010002
-	str	r1, [r0, #DMC_DIRECTCMD]
-	ldr	r1, =0x00000328
-	str	r1, [r0, #DMC_DIRECTCMD]
-
-	/* Wait ?us*/
-	mov	r2, #0x100000
-3:	subs	r2, r2, #1
-	bne	3b
-
-	/* Chip 0: ZQINIT */
-	ldr	r1, =0x0a000000
-	str	r1, [r0, #DMC_DIRECTCMD]
-
-	/* Wait ?us*/
-	mov	r2, #0x100000
-4:	subs	r2, r2, #1
-	bne	4b
-
-	/* Chip1: NOP Command: Assert and Hold CKE to high level */
-	ldr	r1, =0x07100000
-	str	r1, [r0, #DMC_DIRECTCMD]
-
-	/* Wait ?us*/
-	mov	r2, #0x100000
-5:	subs	r2, r2, #1
-	bne	5b
-
-	/* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
-	ldr	r1, =0x00120000
-	str	r1, [r0, #DMC_DIRECTCMD]
-	ldr	r1, =0x00130000
-	str	r1, [r0, #DMC_DIRECTCMD]
-	ldr	r1, =0x00110002
-	str	r1, [r0, #DMC_DIRECTCMD]
-	ldr	r1, =0x00100328
-	str	r1, [r0, #DMC_DIRECTCMD]
-
-	/* Wait ?us*/
-	mov	r2, #0x100000
-6:	subs	r2, r2, #1
-	bne	6b
-
-	/* Chip1: ZQINIT */
-	ldr	r1, =0x0a100000
-	str	r1, [r0, #DMC_DIRECTCMD]
-
-	/* Wait ?us*/
-	mov	r2, #0x100000
-7:	subs	r2, r2, #1
-	bne	7b
-
-	ldr	r1, =0xe000008e
-	str	r1, [r0, #DMC_PHYCONTROL1]
-	ldr	r1, =0xe0000086
-	str	r1, [r0, #DMC_PHYCONTROL1]
-
-	/* Wait ?us*/
-	mov	r2, #0x100000
-8:	subs	r2, r2, #1
-	bne	8b
-
-	/* turn on DREX0, DREX1 */
-	ldr	r0, =EXYNOS4_DMC0_BASE
-	ldr	r1, =0x0FFF303a
-	str	r1, [r0, #DMC_CONCONTROL]
-
-	ldr	r0, =EXYNOS4_DMC1_BASE
-	ldr	r1, =0x0FFF303a
-	str	r1, [r0, #DMC_CONCONTROL]
-
-	mov	pc, lr
diff --git a/board/samsung/origen/mmc_boot.c b/board/samsung/origen/mmc_boot.c
deleted file mode 100644
index 072f16146c2..00000000000
--- a/board/samsung/origen/mmc_boot.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include<common.h>
-#include<config.h>
-
-/*
-* Copy U-boot from mmc to RAM:
-* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
-* Pointer to API (Data transfer from mmc to ram)
-*/
-void copy_uboot_to_ram(void)
-{
-	u32 (*copy_bl2)(u32, u32, u32)  = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR;
-
-	copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
-}
-
-void board_init_f(unsigned long bootflag)
-{
-	__attribute__((noreturn)) void (*uboot)(void);
-	copy_uboot_to_ram();
-
-	/* Jump to U-Boot image */
-	uboot = (void *)CONFIG_SYS_TEXT_BASE;
-	(*uboot)();
-	/* Never returns Here */
-}
-
-/* Place Holders */
-void board_init_r(gd_t *id, ulong dest_addr)
-{
-	/* Function attribute is no-return */
-	/* This Function never executes */
-	while (1)
-		;
-}
-
-void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {}
diff --git a/board/samsung/origen/origen.c b/board/samsung/origen/origen.c
index 638e7b1edbc..b7dbb911b96 100644
--- a/board/samsung/origen/origen.c
+++ b/board/samsung/origen/origen.c
@@ -25,6 +25,8 @@
 #include <asm/arch/cpu.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/pinmux.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 struct exynos4_gpio_part1 *gpio1;
@@ -39,6 +41,50 @@ int board_init(void)
 	return 0;
 }
 
+static int board_uart_init(void)
+{
+	int err;
+
+	err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
+	if (err) {
+		debug("UART0 not configured\n");
+		return err;
+	}
+
+	err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
+	if (err) {
+		debug("UART1 not configured\n");
+		return err;
+	}
+
+	err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
+	if (err) {
+		debug("UART2 not configured\n");
+		return err;
+	}
+
+	err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
+	if (err) {
+		debug("UART3 not configured\n");
+		return err;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+	int err;
+	err = board_uart_init();
+	if (err) {
+		debug("UART init failed\n");
+		return err;
+	}
+	return err;
+}
+#endif
+
 int dram_init(void)
 {
 	gd->ram_size	= get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
diff --git a/board/samsung/origen/origen_setup.h b/board/samsung/origen/origen_setup.h
deleted file mode 100644
index 926a4ccc292..00000000000
--- a/board/samsung/origen/origen_setup.h
+++ /dev/null
@@ -1,607 +0,0 @@
-/*
- * Machine Specific Values for ORIGEN board based on S5PV310
- *
- * Copyright (C) 2011 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ORIGEN_SETUP_H
-#define _ORIGEN_SETUP_H
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/cpu.h>
-
-/* Offsets of clock registers (sources and dividers) */
-#define CLK_SRC_CPU_OFFSET	0x14200
-#define CLK_DIV_CPU0_OFFSET	0x14500
-#define CLK_DIV_CPU1_OFFSET	0x14504
-
-#define CLK_SRC_DMC_OFFSET	0x10200
-#define CLK_DIV_DMC0_OFFSET	0x10500
-#define CLK_DIV_DMC1_OFFSET	0x10504
-
-#define CLK_SRC_TOP0_OFFSET	0xC210
-#define CLK_SRC_TOP1_OFFSET	0xC214
-#define CLK_DIV_TOP_OFFSET	0xC510
-
-#define CLK_SRC_LEFTBUS_OFFSET	0x4200
-#define CLK_DIV_LEFTBUS_OFFSET	0x4500
-
-#define CLK_SRC_RIGHTBUS_OFFSET	0x8200
-#define CLK_DIV_RIGHTBUS_OFFSET	0x8500
-
-#define CLK_SRC_FSYS_OFFSET	0xC240
-#define CLK_DIV_FSYS1_OFFSET	0xC544
-#define CLK_DIV_FSYS2_OFFSET	0xC548
-#define CLK_DIV_FSYS3_OFFSET	0xC54C
-
-#define CLK_SRC_CAM_OFFSET	0xC220
-#define CLK_SRC_TV_OFFSET	0xC224
-#define CLK_SRC_MFC_OFFSET	0xC228
-#define CLK_SRC_G3D_OFFSET	0xC22C
-#define CLK_SRC_LCD0_OFFSET	0xC234
-#define CLK_SRC_PERIL0_OFFSET	0xC250
-
-#define CLK_DIV_CAM_OFFSET	0xC520
-#define CLK_DIV_TV_OFFSET	0xC524
-#define CLK_DIV_MFC_OFFSET	0xC528
-#define CLK_DIV_G3D_OFFSET	0xC52C
-#define CLK_DIV_LCD0_OFFSET	0xC534
-#define CLK_DIV_PERIL0_OFFSET	0xC550
-
-#define CLK_SRC_LCD0_OFFSET	0xC234
-
-#define APLL_LOCK_OFFSET	0x14000
-#define MPLL_LOCK_OFFSET	0x14008
-#define APLL_CON0_OFFSET	0x14100
-#define APLL_CON1_OFFSET	0x14104
-#define MPLL_CON0_OFFSET	0x14108
-#define MPLL_CON1_OFFSET	0x1410C
-
-#define EPLL_LOCK_OFFSET	0xC010
-#define VPLL_LOCK_OFFSET	0xC020
-#define EPLL_CON0_OFFSET	0xC110
-#define EPLL_CON1_OFFSET	0xC114
-#define VPLL_CON0_OFFSET	0xC120
-#define VPLL_CON1_OFFSET	0xC124
-
-/* DMC: DRAM Controllor Register offsets */
-#define DMC_CONCONTROL		0x00
-#define DMC_MEMCONTROL		0x04
-#define DMC_MEMCONFIG0		0x08
-#define DMC_MEMCONFIG1		0x0C
-#define DMC_DIRECTCMD		0x10
-#define DMC_PRECHCONFIG		0x14
-#define DMC_PHYCONTROL0		0x18
-#define DMC_PHYCONTROL1		0x1C
-#define DMC_PHYCONTROL2		0x20
-#define DMC_TIMINGAREF		0x30
-#define DMC_TIMINGROW		0x34
-#define DMC_TIMINGDATA		0x38
-#define DMC_TIMINGPOWER		0x3C
-#define DMC_PHYZQCONTROL	0x44
-
-/* Bus Configuration Register Address */
-#define ASYNC_CONFIG		0x10010350
-
-/* MIU Config Register Offsets*/
-#define APB_SFR_INTERLEAVE_CONF_OFFSET	0x400
-#define APB_SFR_ARBRITATION_CONF_OFFSET		0xC00
-
-/* Offset for inform registers */
-#define INFORM0_OFFSET			0x800
-#define INFORM1_OFFSET			0x804
-
-/* GPIO Offsets for UART: GPIO Contol Register */
-#define EXYNOS4_GPIO_A0_CON_OFFSET	0x00
-#define EXYNOS4_GPIO_A1_CON_OFFSET	0x20
-
-/* UART Register offsets */
-#define ULCON_OFFSET		0x00
-#define UCON_OFFSET		0x04
-#define UFCON_OFFSET		0x08
-#define UBRDIV_OFFSET		0x28
-#define UFRACVAL_OFFSET		0x2C
-
-/* CLK_SRC_CPU */
-#define MUX_HPM_SEL_MOUTAPLL		0x0
-#define MUX_HPM_SEL_SCLKMPLL		0x1
-#define MUX_CORE_SEL_MOUTAPLL		0x0
-#define MUX_CORE_SEL_SCLKMPLL		0x1
-#define MUX_MPLL_SEL_FILPLL		0x0
-#define MUX_MPLL_SEL_MOUTMPLLFOUT	0x1
-#define MUX_APLL_SEL_FILPLL		0x0
-#define MUX_APLL_SEL_MOUTMPLLFOUT	0x1
-#define CLK_SRC_CPU_VAL			((MUX_HPM_SEL_MOUTAPLL << 20) \
-					| (MUX_CORE_SEL_MOUTAPLL << 16) \
-					| (MUX_MPLL_SEL_MOUTMPLLFOUT << 8)\
-					| (MUX_APLL_SEL_MOUTMPLLFOUT << 0))
-
-/* CLK_DIV_CPU0 */
-#define APLL_RATIO		0x0
-#define PCLK_DBG_RATIO		0x1
-#define ATB_RATIO		0x3
-#define PERIPH_RATIO		0x3
-#define COREM1_RATIO		0x7
-#define COREM0_RATIO		0x3
-#define CORE_RATIO		0x0
-#define CLK_DIV_CPU0_VAL	((APLL_RATIO << 24) \
-				| (PCLK_DBG_RATIO << 20) \
-				| (ATB_RATIO << 16) \
-				| (PERIPH_RATIO << 12) \
-				| (COREM1_RATIO << 8) \
-				| (COREM0_RATIO << 4) \
-				| (CORE_RATIO << 0))
-
-/* CLK_DIV_CPU1 */
-#define HPM_RATIO		0x0
-#define COPY_RATIO		0x3
-#define CLK_DIV_CPU1_VAL	((HPM_RATIO << 4) | (COPY_RATIO))
-
-/* CLK_SRC_DMC */
-#define MUX_PWI_SEL_XXTI		0x0
-#define MUX_PWI_SEL_XUSBXTI		0x1
-#define MUX_PWI_SEL_SCLK_HDMI24M	0x2
-#define MUX_PWI_SEL_SCLK_USBPHY0	0x3
-#define MUX_PWI_SEL_SCLK_USBPHY1	0x4
-#define MUX_PWI_SEL_SCLK_HDMIPHY	0x5
-#define MUX_PWI_SEL_SCLKMPLL		0x6
-#define MUX_PWI_SEL_SCLKEPLL		0x7
-#define MUX_PWI_SEL_SCLKVPLL		0x8
-#define MUX_DPHY_SEL_SCLKMPLL		0x0
-#define MUX_DPHY_SEL_SCLKAPLL		0x1
-#define MUX_DMC_BUS_SEL_SCLKMPLL	0x0
-#define MUX_DMC_BUS_SEL_SCLKAPLL	0x1
-#define CLK_SRC_DMC_VAL			((MUX_PWI_SEL_XUSBXTI << 16) \
-					| (MUX_DPHY_SEL_SCLKMPLL << 8) \
-					| (MUX_DMC_BUS_SEL_SCLKMPLL << 4))
-
-/* CLK_DIV_DMC0 */
-#define CORE_TIMERS_RATIO	0x1
-#define COPY2_RATIO		0x3
-#define DMCP_RATIO		0x1
-#define DMCD_RATIO		0x1
-#define DMC_RATIO		0x1
-#define DPHY_RATIO		0x1
-#define ACP_PCLK_RATIO		0x1
-#define ACP_RATIO		0x3
-#define CLK_DIV_DMC0_VAL	((CORE_TIMERS_RATIO << 28) \
-				| (COPY2_RATIO << 24) \
-				| (DMCP_RATIO << 20) \
-				| (DMCD_RATIO << 16) \
-				| (DMC_RATIO << 12) \
-				| (DPHY_RATIO << 8) \
-				| (ACP_PCLK_RATIO << 4)	\
-				| (ACP_RATIO << 0))
-
-/* CLK_DIV_DMC1 */
-#define DPM_RATIO		0x1
-#define DVSEM_RATIO		0x1
-#define PWI_RATIO		0x1
-#define CLK_DIV_DMC1_VAL	((DPM_RATIO << 24) \
-				| (DVSEM_RATIO << 16) \
-				| (PWI_RATIO << 8))
-
-/* CLK_SRC_TOP0 */
-#define MUX_ONENAND_SEL_ACLK_133	0x0
-#define MUX_ONENAND_SEL_ACLK_160	0x1
-#define MUX_ACLK_133_SEL_SCLKMPLL	0x0
-#define MUX_ACLK_133_SEL_SCLKAPLL	0x1
-#define MUX_ACLK_160_SEL_SCLKMPLL	0x0
-#define MUX_ACLK_160_SEL_SCLKAPLL	0x1
-#define MUX_ACLK_100_SEL_SCLKMPLL	0x0
-#define MUX_ACLK_100_SEL_SCLKAPLL	0x1
-#define MUX_ACLK_200_SEL_SCLKMPLL	0x0
-#define MUX_ACLK_200_SEL_SCLKAPLL	0x1
-#define MUX_VPLL_SEL_FINPLL		0x0
-#define MUX_VPLL_SEL_FOUTVPLL		0x1
-#define MUX_EPLL_SEL_FINPLL		0x0
-#define MUX_EPLL_SEL_FOUTEPLL		0x1
-#define MUX_ONENAND_1_SEL_MOUTONENAND	0x0
-#define MUX_ONENAND_1_SEL_SCLKVPLL	0x1
-#define CLK_SRC_TOP0_VAL		((MUX_ONENAND_SEL_ACLK_133 << 28) \
-					| (MUX_ACLK_133_SEL_SCLKMPLL << 24) \
-					| (MUX_ACLK_160_SEL_SCLKMPLL << 20) \
-					| (MUX_ACLK_100_SEL_SCLKMPLL << 16) \
-					| (MUX_ACLK_200_SEL_SCLKMPLL << 12) \
-					| (MUX_VPLL_SEL_FINPLL << 8) \
-					| (MUX_EPLL_SEL_FINPLL << 4)\
-					| (MUX_ONENAND_1_SEL_MOUTONENAND << 0))
-
-/* CLK_SRC_TOP1 */
-#define VPLLSRC_SEL_FINPLL	0x0
-#define VPLLSRC_SEL_SCLKHDMI24M	0x1
-#define CLK_SRC_TOP1_VAL	(VPLLSRC_SEL_FINPLL)
-
-/* CLK_DIV_TOP */
-#define ONENAND_RATIO		0x0
-#define ACLK_133_RATIO		0x5
-#define ACLK_160_RATIO		0x4
-#define ACLK_100_RATIO		0x7
-#define ACLK_200_RATIO		0x3
-#define CLK_DIV_TOP_VAL		((ONENAND_RATIO << 16)	\
-				| (ACLK_133_RATIO << 12)\
-				| (ACLK_160_RATIO << 8)	\
-				| (ACLK_100_RATIO << 4)	\
-				| (ACLK_200_RATIO << 0))
-
-/* CLK_SRC_LEFTBUS */
-#define MUX_GDL_SEL_SCLKMPLL	0x0
-#define MUX_GDL_SEL_SCLKAPLL	0x1
-#define CLK_SRC_LEFTBUS_VAL	(MUX_GDL_SEL_SCLKMPLL)
-
-/* CLK_DIV_LEFTBUS */
-#define GPL_RATIO		0x1
-#define GDL_RATIO		0x3
-#define CLK_DIV_LEFTBUS_VAL	((GPL_RATIO << 4) | (GDL_RATIO))
-
-/* CLK_SRC_RIGHTBUS */
-#define MUX_GDR_SEL_SCLKMPLL	0x0
-#define MUX_GDR_SEL_SCLKAPLL	0x1
-#define CLK_SRC_RIGHTBUS_VAL	(MUX_GDR_SEL_SCLKMPLL)
-
-/* CLK_DIV_RIGHTBUS */
-#define GPR_RATIO		0x1
-#define GDR_RATIO		0x3
-#define CLK_DIV_RIGHTBUS_VAL	((GPR_RATIO << 4) | (GDR_RATIO))
-
-/* CLK_SRS_FSYS: 6 = SCLKMPLL */
-#define SATA_SEL_SCLKMPLL	0
-#define SATA_SEL_SCLKAPLL	1
-
-#define MMC_SEL_XXTI		0
-#define MMC_SEL_XUSBXTI		1
-#define MMC_SEL_SCLK_HDMI24M	2
-#define MMC_SEL_SCLK_USBPHY0	3
-#define MMC_SEL_SCLK_USBPHY1	4
-#define MMC_SEL_SCLK_HDMIPHY	5
-#define MMC_SEL_SCLKMPLL	6
-#define MMC_SEL_SCLKEPLL	7
-#define MMC_SEL_SCLKVPLL	8
-
-#define MMCC0_SEL		MMC_SEL_SCLKMPLL
-#define MMCC1_SEL		MMC_SEL_SCLKMPLL
-#define MMCC2_SEL		MMC_SEL_SCLKMPLL
-#define MMCC3_SEL		MMC_SEL_SCLKMPLL
-#define MMCC4_SEL		MMC_SEL_SCLKMPLL
-#define CLK_SRC_FSYS_VAL	((SATA_SEL_SCLKMPLL << 24) \
-				| (MMCC4_SEL << 16) \
-				| (MMCC3_SEL << 12) \
-				| (MMCC2_SEL << 8) \
-				| (MMCC1_SEL << 4) \
-				| (MMCC0_SEL << 0))
-
-/* SCLK_MMC[0-4] = MOUTMMC[0-4]/(MMC[0-4]_RATIO + 1)/(MMC[0-4]_PRE_RATIO +1) */
-/* CLK_DIV_FSYS1 */
-#define MMC0_RATIO		0xF
-#define MMC0_PRE_RATIO		0x0
-#define MMC1_RATIO		0xF
-#define MMC1_PRE_RATIO		0x0
-#define CLK_DIV_FSYS1_VAL	((MMC1_PRE_RATIO << 24) \
-				| (MMC1_RATIO << 16) \
-				| (MMC0_PRE_RATIO << 8) \
-				| (MMC0_RATIO << 0))
-
-/* CLK_DIV_FSYS2 */
-#define MMC2_RATIO		0xF
-#define MMC2_PRE_RATIO		0x0
-#define MMC3_RATIO		0xF
-#define MMC3_PRE_RATIO		0x0
-#define CLK_DIV_FSYS2_VAL	((MMC3_PRE_RATIO << 24) \
-				| (MMC3_RATIO << 16) \
-				| (MMC2_PRE_RATIO << 8) \
-				| (MMC2_RATIO << 0))
-
-/* CLK_DIV_FSYS3 */
-#define MMC4_RATIO		0xF
-#define MMC4_PRE_RATIO		0x0
-#define CLK_DIV_FSYS3_VAL	((MMC4_PRE_RATIO << 8) \
-				| (MMC4_RATIO << 0))
-
-/* CLK_SRC_PERIL0 */
-#define UART_SEL_XXTI		0
-#define UART_SEL_XUSBXTI	1
-#define UART_SEL_SCLK_HDMI24M	2
-#define UART_SEL_SCLK_USBPHY0	3
-#define UART_SEL_SCLK_USBPHY1	4
-#define UART_SEL_SCLK_HDMIPHY	5
-#define UART_SEL_SCLKMPLL	6
-#define UART_SEL_SCLKEPLL	7
-#define UART_SEL_SCLKVPLL	8
-
-#define UART0_SEL		UART_SEL_SCLKMPLL
-#define UART1_SEL		UART_SEL_SCLKMPLL
-#define UART2_SEL		UART_SEL_SCLKMPLL
-#define UART3_SEL		UART_SEL_SCLKMPLL
-#define UART4_SEL		UART_SEL_SCLKMPLL
-#define CLK_SRC_PERIL0_VAL	((UART4_SEL << 16) \
-				| (UART3_SEL << 12) \
-				| (UART2_SEL << 8) \
-				| (UART1_SEL << 4) \
-				| (UART0_SEL << 0))
-
-/* SCLK_UART[0-4] = MOUTUART[0-4]/(UART[0-4]_RATIO + 1) */
-/* CLK_DIV_PERIL0 */
-#define UART0_RATIO		7
-#define UART1_RATIO		7
-#define UART2_RATIO		7
-#define UART3_RATIO		7
-#define UART4_RATIO		7
-#define CLK_DIV_PERIL0_VAL	((UART4_RATIO << 16) \
-				| (UART3_RATIO << 12) \
-				| (UART2_RATIO << 8) \
-				| (UART1_RATIO << 4) \
-				| (UART0_RATIO << 0))
-
-/* Clock Source CAM/FIMC */
-/* CLK_SRC_CAM */
-#define CAM0_SEL_XUSBXTI	1
-#define CAM1_SEL_XUSBXTI	1
-#define CSIS0_SEL_XUSBXTI	1
-#define CSIS1_SEL_XUSBXTI	1
-
-#define FIMC_SEL_SCLKMPLL	6
-#define FIMC0_LCLK_SEL		FIMC_SEL_SCLKMPLL
-#define FIMC1_LCLK_SEL		FIMC_SEL_SCLKMPLL
-#define FIMC2_LCLK_SEL		FIMC_SEL_SCLKMPLL
-#define FIMC3_LCLK_SEL		FIMC_SEL_SCLKMPLL
-
-#define CLK_SRC_CAM_VAL		((CSIS1_SEL_XUSBXTI << 28) \
-				| (CSIS0_SEL_XUSBXTI << 24) \
-				| (CAM1_SEL_XUSBXTI << 20) \
-				| (CAM0_SEL_XUSBXTI << 16) \
-				| (FIMC3_LCLK_SEL << 12) \
-				| (FIMC2_LCLK_SEL << 8) \
-				| (FIMC1_LCLK_SEL << 4) \
-				| (FIMC0_LCLK_SEL << 0))
-
-/* SCLK CAM */
-/* CLK_DIV_CAM */
-#define FIMC0_LCLK_RATIO	4
-#define FIMC1_LCLK_RATIO	4
-#define FIMC2_LCLK_RATIO	4
-#define FIMC3_LCLK_RATIO	4
-#define CLK_DIV_CAM_VAL		((FIMC3_LCLK_RATIO << 12) \
-				| (FIMC2_LCLK_RATIO << 8) \
-				| (FIMC1_LCLK_RATIO << 4) \
-				| (FIMC0_LCLK_RATIO << 0))
-
-/* SCLK MFC */
-/* CLK_SRC_MFC */
-#define MFC_SEL_MPLL		0
-#define MOUTMFC_0		0
-#define MFC_SEL			MOUTMFC_0
-#define MFC_0_SEL		MFC_SEL_MPLL
-#define CLK_SRC_MFC_VAL		((MFC_SEL << 8) | (MFC_0_SEL))
-
-
-/* CLK_DIV_MFC */
-#define MFC_RATIO		3
-#define CLK_DIV_MFC_VAL		(MFC_RATIO)
-
-/* SCLK G3D */
-/* CLK_SRC_G3D */
-#define G3D_SEL_MPLL		0
-#define MOUTG3D_0		0
-#define G3D_SEL			MOUTG3D_0
-#define G3D_0_SEL		G3D_SEL_MPLL
-#define CLK_SRC_G3D_VAL		((G3D_SEL << 8) | (G3D_0_SEL))
-
-/* CLK_DIV_G3D */
-#define G3D_RATIO		1
-#define CLK_DIV_G3D_VAL		(G3D_RATIO)
-
-/* SCLK LCD0 */
-/* CLK_SRC_LCD0 */
-#define FIMD_SEL_SCLKMPLL	6
-#define MDNIE0_SEL_XUSBXTI	1
-#define MDNIE_PWM0_SEL_XUSBXTI	1
-#define MIPI0_SEL_XUSBXTI	1
-#define CLK_SRC_LCD0_VAL	((MIPI0_SEL_XUSBXTI << 12) \
-				| (MDNIE_PWM0_SEL_XUSBXTI << 8) \
-				| (MDNIE0_SEL_XUSBXTI << 4) \
-				| (FIMD_SEL_SCLKMPLL << 0))
-
-/* CLK_DIV_LCD0 */
-#define FIMD0_RATIO		4
-#define CLK_DIV_LCD0_VAL	(FIMD0_RATIO)
-
-/* Required period to generate a stable clock output */
-/* PLL_LOCK_TIME */
-#define PLL_LOCKTIME		0x1C20
-
-/* PLL Values */
-#define DISABLE			0
-#define ENABLE			1
-#define SET_PLL(mdiv, pdiv, sdiv)	((ENABLE << 31)\
-					| (mdiv << 16) \
-					| (pdiv << 8) \
-					| (sdiv << 0))
-
-/* APLL_CON0 */
-#define APLL_MDIV		0xFA
-#define APLL_PDIV		0x6
-#define APLL_SDIV		0x1
-#define APLL_CON0_VAL		SET_PLL(APLL_MDIV, APLL_PDIV, APLL_SDIV)
-
-/* APLL_CON1 */
-#define APLL_AFC_ENB		0x1
-#define APLL_AFC		0xC
-#define APLL_CON1_VAL		((APLL_AFC_ENB << 31) | (APLL_AFC << 0))
-
-/* MPLL_CON0 */
-#define MPLL_MDIV		0xC8
-#define MPLL_PDIV		0x6
-#define MPLL_SDIV		0x1
-#define MPLL_CON0_VAL		SET_PLL(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV)
-
-/* MPLL_CON1 */
-#define MPLL_AFC_ENB		0x0
-#define MPLL_AFC		0x1C
-#define MPLL_CON1_VAL		((MPLL_AFC_ENB << 31) | (MPLL_AFC << 0))
-
-/* EPLL_CON0 */
-#define EPLL_MDIV		0x30
-#define EPLL_PDIV		0x3
-#define EPLL_SDIV		0x2
-#define EPLL_CON0_VAL		SET_PLL(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV)
-
-/* EPLL_CON1 */
-#define EPLL_K			0x0
-#define EPLL_CON1_VAL		(EPLL_K >> 0)
-
-/* VPLL_CON0 */
-#define VPLL_MDIV		0x35
-#define VPLL_PDIV		0x3
-#define VPLL_SDIV		0x2
-#define VPLL_CON0_VAL		SET_PLL(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV)
-
-/* VPLL_CON1 */
-#define VPLL_SSCG_EN		DISABLE
-#define VPLL_SEL_PF_DN_SPREAD	0x0
-#define VPLL_MRR		0x11
-#define VPLL_MFR		0x0
-#define VPLL_K			0x400
-#define VPLL_CON1_VAL		((VPLL_SSCG_EN << 31)\
-				| (VPLL_SEL_PF_DN_SPREAD << 29) \
-				| (VPLL_MRR << 24) \
-				| (VPLL_MFR << 16) \
-				| (VPLL_K << 0))
-/*
- * UART GPIO_A0/GPIO_A1 Control Register Value
- * 0x2: UART Function
- */
-#define EXYNOS4_GPIO_A0_CON_VAL	0x22222222
-#define EXYNOS4_GPIO_A1_CON_VAL	0x222222
-
-/* ULCON: UART Line Control Value 8N1 */
-#define WORD_LEN_5_BIT		0x00
-#define WORD_LEN_6_BIT		0x01
-#define WORD_LEN_7_BIT		0x02
-#define WORD_LEN_8_BIT		0x03
-
-#define STOP_BIT_1		0x00
-#define STOP_BIT_2		0x01
-
-#define NO_PARITY			0x00
-#define ODD_PARITY			0x4
-#define EVEN_PARITY			0x5
-#define FORCED_PARITY_CHECK_AS_1	0x6
-#define FORCED_PARITY_CHECK_AS_0	0x7
-
-#define INFRAMODE_NORMAL		0x00
-#define INFRAMODE_INFRARED		0x01
-
-#define ULCON_VAL		((INFRAMODE_NORMAL << 6) \
-				| (NO_PARITY << 3) \
-				| (STOP_BIT_1 << 2) \
-				| (WORD_LEN_8_BIT << 0))
-
-/*
- * UCON: UART Control Value
- * Tx_interrupt Type: Level
- * Rx_interrupt Type: Level
- * Rx Timeout Enabled: Yes
- * Rx-Error Atatus_Int Enable: Yes
- * Loop_Back: No
- * Break Signal: No
- * Transmit mode : Interrupt request/polling
- * Receive mode : Interrupt request/polling
- */
-#define TX_PULSE_INTERRUPT	0
-#define TX_LEVEL_INTERRUPT	1
-#define RX_PULSE_INTERRUPT	0
-#define RX_LEVEL_INTERRUPT	1
-
-#define RX_TIME_OUT		ENABLE
-#define RX_ERROR_STATE_INT_ENB	ENABLE
-#define LOOP_BACK		DISABLE
-#define BREAK_SIGNAL		DISABLE
-
-#define TX_MODE_DISABLED	0X00
-#define TX_MODE_IRQ_OR_POLL	0X01
-#define TX_MODE_DMA		0X02
-
-#define RX_MODE_DISABLED	0X00
-#define RX_MODE_IRQ_OR_POLL	0X01
-#define RX_MODE_DMA		0X02
-
-#define UCON_VAL		((TX_LEVEL_INTERRUPT << 9) \
-				| (RX_LEVEL_INTERRUPT << 8) \
-				| (RX_TIME_OUT << 7) \
-				| (RX_ERROR_STATE_INT_ENB << 6) \
-				| (LOOP_BACK << 5) \
-				| (BREAK_SIGNAL << 4) \
-				| (TX_MODE_IRQ_OR_POLL << 2) \
-				| (RX_MODE_IRQ_OR_POLL << 0))
-
-/*
- * UFCON: UART FIFO Control Value
- * Tx FIFO Trigger LEVEL: 2 Bytes (001)
- * Rx FIFO Trigger LEVEL: 2 Bytes (001)
- * Tx Fifo Reset: No
- * Rx Fifo Reset: No
- * FIFO Enable: Yes
- */
-#define TX_FIFO_TRIGGER_LEVEL_0_BYTES	0x00
-#define TX_FIFO_TRIGGER_LEVEL_2_BYTES	0x1
-#define TX_FIFO_TRIGGER_LEVEL_4_BYTES	0x2
-#define TX_FIFO_TRIGGER_LEVEL_6_BYTES	0x3
-#define TX_FIFO_TRIGGER_LEVEL_8_BYTES	0x4
-#define TX_FIFO_TRIGGER_LEVEL_10_BYTES	0x5
-#define TX_FIFO_TRIGGER_LEVEL_12_BYTES	0x6
-#define TX_FIFO_TRIGGER_LEVEL_14_BYTES	0x7
-
-#define RX_FIFO_TRIGGER_LEVEL_2_BYTES	0x0
-#define RX_FIFO_TRIGGER_LEVEL_4_BYTES	0x1
-#define RX_FIFO_TRIGGER_LEVEL_6_BYTES	0x2
-#define RX_FIFO_TRIGGER_LEVEL_8_BYTES	0x3
-#define RX_FIFO_TRIGGER_LEVEL_10_BYTES	0x4
-#define RX_FIFO_TRIGGER_LEVEL_12_BYTES	0x5
-#define RX_FIFO_TRIGGER_LEVEL_14_BYTES	0x6
-#define RX_FIFO_TRIGGER_LEVEL_16_BYTES	0x7
-
-#define TX_FIFO_TRIGGER_LEVEL		TX_FIFO_TRIGGER_LEVEL_2_BYTES
-#define RX_FIFO_TRIGGER_LEVEL		RX_FIFO_TRIGGER_LEVEL_4_BYTES
-#define TX_FIFO_RESET			DISABLE
-#define RX_FIFO_RESET			DISABLE
-#define FIFO_ENABLE			ENABLE
-#define UFCON_VAL			((TX_FIFO_TRIGGER_LEVEL << 8) \
-					| (RX_FIFO_TRIGGER_LEVEL << 4) \
-					| (TX_FIFO_RESET << 2) \
-					| (RX_FIFO_RESET << 1) \
-					| (FIFO_ENABLE << 0))
-/*
- * Baud Rate Division Value
- * 115200 BAUD:
- * UBRDIV_VAL = SCLK_UART/((115200 * 16) - 1)
- * UBRDIV_VAL = (800 MHz)/((115200 * 16) - 1)
- */
-#define UBRDIV_VAL		0x35
-
-/*
- * Fractional Part of Baud Rate Divisor:
- * 115200 BAUD:
- * UBRFRACVAL = ((((SCLK_UART*10/(115200*16) -10))%10)*16/10)
- * UBRFRACVAL = ((((800MHz*10/(115200*16) -10))%10)*16/10)
- */
-#define UFRACVAL_VAL		0x4
-#endif
diff --git a/board/samsung/smdk5250/Makefile b/board/samsung/smdk5250/Makefile
index f2c32ee4c87..9412e373f7b 100644
--- a/board/samsung/smdk5250/Makefile
+++ b/board/samsung/smdk5250/Makefile
@@ -24,10 +24,6 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
-SOBJS	:= lowlevel_init.o
-
-COBJS	:= clock_init.o
-COBJS	+= dmc_common.o dmc_init_ddr3.o
 COBJS	+= smdk5250_spl.o
 
 ifndef CONFIG_SPL_BUILD
@@ -38,14 +34,10 @@ COBJS	+= smdk5250.o
 endif
 endif
 
-ifdef CONFIG_SPL_BUILD
-COBJS	+= spl_boot.o
-endif
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
 
-ALL	:=	 $(obj).depend $(LIB)
+ALL	:= $(obj).depend $(LIB)
 
 all:	$(ALL)
 
diff --git a/board/samsung/smdk5250/clock_init.c b/board/samsung/smdk5250/clock_init.c
deleted file mode 100644
index b288e66f0eb..00000000000
--- a/board/samsung/smdk5250/clock_init.c
+++ /dev/null
@@ -1,684 +0,0 @@
-/*
- * Clock setup for SMDK5250 board based on EXYNOS5
- *
- * Copyright (C) 2012 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <asm/io.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/spl.h>
-#include <asm/arch/dwmmc.h>
-
-#include "clock_init.h"
-#include "setup.h"
-
-#define FSYS1_MMC0_DIV_MASK	0xff0f
-#define FSYS1_MMC0_DIV_VAL	0x0701
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct arm_clk_ratios arm_clk_ratios[] = {
-	{
-		.arm_freq_mhz = 600,
-
-		.apll_mdiv = 0xc8,
-		.apll_pdiv = 0x4,
-		.apll_sdiv = 0x1,
-
-		.arm2_ratio = 0x0,
-		.apll_ratio = 0x1,
-		.pclk_dbg_ratio = 0x1,
-		.atb_ratio = 0x2,
-		.periph_ratio = 0x7,
-		.acp_ratio = 0x7,
-		.cpud_ratio = 0x1,
-		.arm_ratio = 0x0,
-	}, {
-		.arm_freq_mhz = 800,
-
-		.apll_mdiv = 0x64,
-		.apll_pdiv = 0x3,
-		.apll_sdiv = 0x0,
-
-		.arm2_ratio = 0x0,
-		.apll_ratio = 0x1,
-		.pclk_dbg_ratio = 0x1,
-		.atb_ratio = 0x3,
-		.periph_ratio = 0x7,
-		.acp_ratio = 0x7,
-		.cpud_ratio = 0x2,
-		.arm_ratio = 0x0,
-	}, {
-		.arm_freq_mhz = 1000,
-
-		.apll_mdiv = 0x7d,
-		.apll_pdiv = 0x3,
-		.apll_sdiv = 0x0,
-
-		.arm2_ratio = 0x0,
-		.apll_ratio = 0x1,
-		.pclk_dbg_ratio = 0x1,
-		.atb_ratio = 0x4,
-		.periph_ratio = 0x7,
-		.acp_ratio = 0x7,
-		.cpud_ratio = 0x2,
-		.arm_ratio = 0x0,
-	}, {
-		.arm_freq_mhz = 1200,
-
-		.apll_mdiv = 0x96,
-		.apll_pdiv = 0x3,
-		.apll_sdiv = 0x0,
-
-		.arm2_ratio = 0x0,
-		.apll_ratio = 0x3,
-		.pclk_dbg_ratio = 0x1,
-		.atb_ratio = 0x5,
-		.periph_ratio = 0x7,
-		.acp_ratio = 0x7,
-		.cpud_ratio = 0x3,
-		.arm_ratio = 0x0,
-	}, {
-		.arm_freq_mhz = 1400,
-
-		.apll_mdiv = 0xaf,
-		.apll_pdiv = 0x3,
-		.apll_sdiv = 0x0,
-
-		.arm2_ratio = 0x0,
-		.apll_ratio = 0x3,
-		.pclk_dbg_ratio = 0x1,
-		.atb_ratio = 0x6,
-		.periph_ratio = 0x7,
-		.acp_ratio = 0x7,
-		.cpud_ratio = 0x3,
-		.arm_ratio = 0x0,
-	}, {
-		.arm_freq_mhz = 1700,
-
-		.apll_mdiv = 0x1a9,
-		.apll_pdiv = 0x6,
-		.apll_sdiv = 0x0,
-
-		.arm2_ratio = 0x0,
-		.apll_ratio = 0x3,
-		.pclk_dbg_ratio = 0x1,
-		.atb_ratio = 0x6,
-		.periph_ratio = 0x7,
-		.acp_ratio = 0x7,
-		.cpud_ratio = 0x3,
-		.arm_ratio = 0x0,
-	}
-};
-struct mem_timings mem_timings[] = {
-	{
-		.mem_manuf = MEM_MANUF_ELPIDA,
-		.mem_type = DDR_MODE_DDR3,
-		.frequency_mhz = 800,
-		.mpll_mdiv = 0xc8,
-		.mpll_pdiv = 0x3,
-		.mpll_sdiv = 0x0,
-		.cpll_mdiv = 0xde,
-		.cpll_pdiv = 0x4,
-		.cpll_sdiv = 0x2,
-		.gpll_mdiv = 0x215,
-		.gpll_pdiv = 0xc,
-		.gpll_sdiv = 0x1,
-		.epll_mdiv = 0x60,
-		.epll_pdiv = 0x3,
-		.epll_sdiv = 0x3,
-		.vpll_mdiv = 0x96,
-		.vpll_pdiv = 0x3,
-		.vpll_sdiv = 0x2,
-
-		.bpll_mdiv = 0x64,
-		.bpll_pdiv = 0x3,
-		.bpll_sdiv = 0x0,
-		.pclk_cdrex_ratio = 0x5,
-		.direct_cmd_msr = {
-			0x00020018, 0x00030000, 0x00010042, 0x00000d70
-		},
-		.timing_ref = 0x000000bb,
-		.timing_row = 0x8c36650e,
-		.timing_data = 0x3630580b,
-		.timing_power = 0x41000a44,
-		.phy0_dqs = 0x08080808,
-		.phy1_dqs = 0x08080808,
-		.phy0_dq = 0x08080808,
-		.phy1_dq = 0x08080808,
-		.phy0_tFS = 0x4,
-		.phy1_tFS = 0x4,
-		.phy0_pulld_dqs = 0xf,
-		.phy1_pulld_dqs = 0xf,
-
-		.lpddr3_ctrl_phy_reset = 0x1,
-		.ctrl_start_point = 0x10,
-		.ctrl_inc = 0x10,
-		.ctrl_start = 0x1,
-		.ctrl_dll_on = 0x1,
-		.ctrl_ref = 0x8,
-
-		.ctrl_force = 0x1a,
-		.ctrl_rdlat = 0x0b,
-		.ctrl_bstlen = 0x08,
-
-		.fp_resync = 0x8,
-		.iv_size = 0x7,
-		.dfi_init_start = 1,
-		.aref_en = 1,
-
-		.rd_fetch = 0x3,
-
-		.zq_mode_dds = 0x7,
-		.zq_mode_term = 0x1,
-		.zq_mode_noterm = 0,
-
-		/*
-		* Dynamic Clock: Always Running
-		* Memory Burst length: 8
-		* Number of chips: 1
-		* Memory Bus width: 32 bit
-		* Memory Type: DDR3
-		* Additional Latancy for PLL: 0 Cycle
-		*/
-		.memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
-			DMC_MEMCONTROL_DPWRDN_DISABLE |
-			DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
-			DMC_MEMCONTROL_TP_DISABLE |
-			DMC_MEMCONTROL_DSREF_ENABLE |
-			DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
-			DMC_MEMCONTROL_MEM_TYPE_DDR3 |
-			DMC_MEMCONTROL_MEM_WIDTH_32BIT |
-			DMC_MEMCONTROL_NUM_CHIP_1 |
-			DMC_MEMCONTROL_BL_8 |
-			DMC_MEMCONTROL_PZQ_DISABLE |
-			DMC_MEMCONTROL_MRR_BYTE_7_0,
-		.memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED |
-			DMC_MEMCONFIGx_CHIP_COL_10 |
-			DMC_MEMCONFIGx_CHIP_ROW_15 |
-			DMC_MEMCONFIGx_CHIP_BANK_8,
-		.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
-		.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
-		.prechconfig_tp_cnt = 0xff,
-		.dpwrdn_cyc = 0xff,
-		.dsref_cyc = 0xffff,
-		.concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
-			DMC_CONCONTROL_TIMEOUT_LEVEL0 |
-			DMC_CONCONTROL_RD_FETCH_DISABLE |
-			DMC_CONCONTROL_EMPTY_DISABLE |
-			DMC_CONCONTROL_AREF_EN_DISABLE |
-			DMC_CONCONTROL_IO_PD_CON_DISABLE,
-		.dmc_channels = 2,
-		.chips_per_channel = 2,
-		.chips_to_configure = 1,
-		.send_zq_init = 1,
-		.impedance = IMP_OUTPUT_DRV_30_OHM,
-		.gate_leveling_enable = 0,
-	}, {
-		.mem_manuf = MEM_MANUF_SAMSUNG,
-		.mem_type = DDR_MODE_DDR3,
-		.frequency_mhz = 800,
-		.mpll_mdiv = 0xc8,
-		.mpll_pdiv = 0x3,
-		.mpll_sdiv = 0x0,
-		.cpll_mdiv = 0xde,
-		.cpll_pdiv = 0x4,
-		.cpll_sdiv = 0x2,
-		.gpll_mdiv = 0x215,
-		.gpll_pdiv = 0xc,
-		.gpll_sdiv = 0x1,
-		.epll_mdiv = 0x60,
-		.epll_pdiv = 0x3,
-		.epll_sdiv = 0x3,
-		.vpll_mdiv = 0x96,
-		.vpll_pdiv = 0x3,
-		.vpll_sdiv = 0x2,
-
-		.bpll_mdiv = 0x64,
-		.bpll_pdiv = 0x3,
-		.bpll_sdiv = 0x0,
-		.pclk_cdrex_ratio = 0x5,
-		.direct_cmd_msr = {
-			0x00020018, 0x00030000, 0x00010000, 0x00000d70
-		},
-		.timing_ref = 0x000000bb,
-		.timing_row = 0x8c36650e,
-		.timing_data = 0x3630580b,
-		.timing_power = 0x41000a44,
-		.phy0_dqs = 0x08080808,
-		.phy1_dqs = 0x08080808,
-		.phy0_dq = 0x08080808,
-		.phy1_dq = 0x08080808,
-		.phy0_tFS = 0x8,
-		.phy1_tFS = 0x8,
-		.phy0_pulld_dqs = 0xf,
-		.phy1_pulld_dqs = 0xf,
-
-		.lpddr3_ctrl_phy_reset = 0x1,
-		.ctrl_start_point = 0x10,
-		.ctrl_inc = 0x10,
-		.ctrl_start = 0x1,
-		.ctrl_dll_on = 0x1,
-		.ctrl_ref = 0x8,
-
-		.ctrl_force = 0x1a,
-		.ctrl_rdlat = 0x0b,
-		.ctrl_bstlen = 0x08,
-
-		.fp_resync = 0x8,
-		.iv_size = 0x7,
-		.dfi_init_start = 1,
-		.aref_en = 1,
-
-		.rd_fetch = 0x3,
-
-		.zq_mode_dds = 0x5,
-		.zq_mode_term = 0x1,
-		.zq_mode_noterm = 1,
-
-		/*
-		* Dynamic Clock: Always Running
-		* Memory Burst length: 8
-		* Number of chips: 1
-		* Memory Bus width: 32 bit
-		* Memory Type: DDR3
-		* Additional Latancy for PLL: 0 Cycle
-		*/
-		.memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
-			DMC_MEMCONTROL_DPWRDN_DISABLE |
-			DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
-			DMC_MEMCONTROL_TP_DISABLE |
-			DMC_MEMCONTROL_DSREF_ENABLE |
-			DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
-			DMC_MEMCONTROL_MEM_TYPE_DDR3 |
-			DMC_MEMCONTROL_MEM_WIDTH_32BIT |
-			DMC_MEMCONTROL_NUM_CHIP_1 |
-			DMC_MEMCONTROL_BL_8 |
-			DMC_MEMCONTROL_PZQ_DISABLE |
-			DMC_MEMCONTROL_MRR_BYTE_7_0,
-		.memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED |
-			DMC_MEMCONFIGx_CHIP_COL_10 |
-			DMC_MEMCONFIGx_CHIP_ROW_15 |
-			DMC_MEMCONFIGx_CHIP_BANK_8,
-		.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
-		.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
-		.prechconfig_tp_cnt = 0xff,
-		.dpwrdn_cyc = 0xff,
-		.dsref_cyc = 0xffff,
-		.concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
-			DMC_CONCONTROL_TIMEOUT_LEVEL0 |
-			DMC_CONCONTROL_RD_FETCH_DISABLE |
-			DMC_CONCONTROL_EMPTY_DISABLE |
-			DMC_CONCONTROL_AREF_EN_DISABLE |
-			DMC_CONCONTROL_IO_PD_CON_DISABLE,
-		.dmc_channels = 2,
-		.chips_per_channel = 2,
-		.chips_to_configure = 1,
-		.send_zq_init = 1,
-		.impedance = IMP_OUTPUT_DRV_40_OHM,
-		.gate_leveling_enable = 1,
-	}
-};
-
-/**
- * Get the required memory type and speed (SPL version).
- *
- * In SPL we have no device tree, so we use the machine parameters
- *
- * @param mem_type	Returns memory type
- * @param frequency_mhz	Returns memory speed in MHz
- * @param arm_freq	Returns ARM clock speed in MHz
- * @param mem_manuf	Return Memory Manufacturer name
- * @return 0 if all ok
- */
-static int clock_get_mem_selection(enum ddr_mode *mem_type,
-		unsigned *frequency_mhz, unsigned *arm_freq,
-		enum mem_manuf *mem_manuf)
-{
-	struct spl_machine_param *params;
-
-	params = spl_get_machine_params();
-	*mem_type = params->mem_type;
-	*frequency_mhz = params->frequency_mhz;
-	*arm_freq = params->arm_freq_mhz;
-	*mem_manuf = params->mem_manuf;
-
-	return 0;
-}
-
-/* Get the ratios for setting ARM clock */
-struct arm_clk_ratios *get_arm_ratios(void)
-{
-	struct arm_clk_ratios *arm_ratio;
-	enum ddr_mode mem_type;
-	enum mem_manuf mem_manuf;
-	unsigned frequency_mhz, arm_freq;
-	int i;
-
-	if (clock_get_mem_selection(&mem_type, &frequency_mhz,
-					&arm_freq, &mem_manuf))
-		;
-	for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios);
-		i++, arm_ratio++) {
-		if (arm_ratio->arm_freq_mhz == arm_freq)
-			return arm_ratio;
-	}
-
-	/* will hang if failed to find clock ratio */
-	while (1)
-		;
-
-	return NULL;
-}
-
-struct mem_timings *clock_get_mem_timings(void)
-{
-	struct mem_timings *mem;
-	enum ddr_mode mem_type;
-	enum mem_manuf mem_manuf;
-	unsigned frequency_mhz, arm_freq;
-	int i;
-
-	if (!clock_get_mem_selection(&mem_type, &frequency_mhz,
-						&arm_freq, &mem_manuf)) {
-		for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings);
-				i++, mem++) {
-			if (mem->mem_type == mem_type &&
-					mem->frequency_mhz == frequency_mhz &&
-					mem->mem_manuf == mem_manuf)
-				return mem;
-		}
-	}
-
-	/* will hang if failed to find memory timings */
-	while (1)
-		;
-
-	return NULL;
-}
-
-void system_clock_init()
-{
-	struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
-	struct mem_timings *mem;
-	struct arm_clk_ratios *arm_clk_ratio;
-	u32 val, tmp;
-
-	mem = clock_get_mem_timings();
-	arm_clk_ratio = get_arm_ratios();
-
-	clrbits_le32(&clk->src_cpu, MUX_APLL_SEL_MASK);
-	do {
-		val = readl(&clk->mux_stat_cpu);
-	} while ((val | MUX_APLL_SEL_MASK) != val);
-
-	clrbits_le32(&clk->src_core1, MUX_MPLL_SEL_MASK);
-	do {
-		val = readl(&clk->mux_stat_core1);
-	} while ((val | MUX_MPLL_SEL_MASK) != val);
-
-	clrbits_le32(&clk->src_top2, MUX_CPLL_SEL_MASK);
-	clrbits_le32(&clk->src_top2, MUX_EPLL_SEL_MASK);
-	clrbits_le32(&clk->src_top2, MUX_VPLL_SEL_MASK);
-	clrbits_le32(&clk->src_top2, MUX_GPLL_SEL_MASK);
-	tmp = MUX_CPLL_SEL_MASK | MUX_EPLL_SEL_MASK | MUX_VPLL_SEL_MASK
-		| MUX_GPLL_SEL_MASK;
-	do {
-		val = readl(&clk->mux_stat_top2);
-	} while ((val | tmp) != val);
-
-	clrbits_le32(&clk->src_cdrex, MUX_BPLL_SEL_MASK);
-	do {
-		val = readl(&clk->mux_stat_cdrex);
-	} while ((val | MUX_BPLL_SEL_MASK) != val);
-
-	/* PLL locktime */
-	writel(APLL_LOCK_VAL, &clk->apll_lock);
-
-	writel(MPLL_LOCK_VAL, &clk->mpll_lock);
-
-	writel(BPLL_LOCK_VAL, &clk->bpll_lock);
-
-	writel(CPLL_LOCK_VAL, &clk->cpll_lock);
-
-	writel(GPLL_LOCK_VAL, &clk->gpll_lock);
-
-	writel(EPLL_LOCK_VAL, &clk->epll_lock);
-
-	writel(VPLL_LOCK_VAL, &clk->vpll_lock);
-
-	writel(CLK_REG_DISABLE, &clk->pll_div2_sel);
-
-	writel(MUX_HPM_SEL_MASK, &clk->src_cpu);
-	do {
-		val = readl(&clk->mux_stat_cpu);
-	} while ((val | HPM_SEL_SCLK_MPLL) != val);
-
-	val = arm_clk_ratio->arm2_ratio << 28
-		| arm_clk_ratio->apll_ratio << 24
-		| arm_clk_ratio->pclk_dbg_ratio << 20
-		| arm_clk_ratio->atb_ratio << 16
-		| arm_clk_ratio->periph_ratio << 12
-		| arm_clk_ratio->acp_ratio << 8
-		| arm_clk_ratio->cpud_ratio << 4
-		| arm_clk_ratio->arm_ratio;
-	writel(val, &clk->div_cpu0);
-	do {
-		val = readl(&clk->div_stat_cpu0);
-	} while (0 != val);
-
-	writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1);
-	do {
-		val = readl(&clk->div_stat_cpu1);
-	} while (0 != val);
-
-	/* Set APLL */
-	writel(APLL_CON1_VAL, &clk->apll_con1);
-	val = set_pll(arm_clk_ratio->apll_mdiv, arm_clk_ratio->apll_pdiv,
-			arm_clk_ratio->apll_sdiv);
-	writel(val, &clk->apll_con0);
-	while ((readl(&clk->apll_con0) & APLL_CON0_LOCKED) == 0)
-		;
-
-	/* Set MPLL */
-	writel(MPLL_CON1_VAL, &clk->mpll_con1);
-	val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv);
-	writel(val, &clk->mpll_con0);
-	while ((readl(&clk->mpll_con0) & MPLL_CON0_LOCKED) == 0)
-		;
-
-	/* Set BPLL */
-	writel(BPLL_CON1_VAL, &clk->bpll_con1);
-	val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv);
-	writel(val, &clk->bpll_con0);
-	while ((readl(&clk->bpll_con0) & BPLL_CON0_LOCKED) == 0)
-		;
-
-	/* Set CPLL */
-	writel(CPLL_CON1_VAL, &clk->cpll_con1);
-	val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv);
-	writel(val, &clk->cpll_con0);
-	while ((readl(&clk->cpll_con0) & CPLL_CON0_LOCKED) == 0)
-		;
-
-	/* Set GPLL */
-	writel(GPLL_CON1_VAL, &clk->gpll_con1);
-	val = set_pll(mem->gpll_mdiv, mem->gpll_pdiv, mem->gpll_sdiv);
-	writel(val, &clk->gpll_con0);
-	while ((readl(&clk->gpll_con0) & GPLL_CON0_LOCKED) == 0)
-		;
-
-	/* Set EPLL */
-	writel(EPLL_CON2_VAL, &clk->epll_con2);
-	writel(EPLL_CON1_VAL, &clk->epll_con1);
-	val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv);
-	writel(val, &clk->epll_con0);
-	while ((readl(&clk->epll_con0) & EPLL_CON0_LOCKED) == 0)
-		;
-
-	/* Set VPLL */
-	writel(VPLL_CON2_VAL, &clk->vpll_con2);
-	writel(VPLL_CON1_VAL, &clk->vpll_con1);
-	val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv);
-	writel(val, &clk->vpll_con0);
-	while ((readl(&clk->vpll_con0) & VPLL_CON0_LOCKED) == 0)
-		;
-
-	writel(CLK_SRC_CORE0_VAL, &clk->src_core0);
-	writel(CLK_DIV_CORE0_VAL, &clk->div_core0);
-	while (readl(&clk->div_stat_core0) != 0)
-		;
-
-	writel(CLK_DIV_CORE1_VAL, &clk->div_core1);
-	while (readl(&clk->div_stat_core1) != 0)
-		;
-
-	writel(CLK_DIV_SYSRGT_VAL, &clk->div_sysrgt);
-	while (readl(&clk->div_stat_sysrgt) != 0)
-		;
-
-	writel(CLK_DIV_ACP_VAL, &clk->div_acp);
-	while (readl(&clk->div_stat_acp) != 0)
-		;
-
-	writel(CLK_DIV_SYSLFT_VAL, &clk->div_syslft);
-	while (readl(&clk->div_stat_syslft) != 0)
-		;
-
-	writel(CLK_SRC_TOP0_VAL, &clk->src_top0);
-	writel(CLK_SRC_TOP1_VAL, &clk->src_top1);
-	writel(TOP2_VAL, &clk->src_top2);
-	writel(CLK_SRC_TOP3_VAL, &clk->src_top3);
-
-	writel(CLK_DIV_TOP0_VAL, &clk->div_top0);
-	while (readl(&clk->div_stat_top0))
-		;
-
-	writel(CLK_DIV_TOP1_VAL, &clk->div_top1);
-	while (readl(&clk->div_stat_top1))
-		;
-
-	writel(CLK_SRC_LEX_VAL, &clk->src_lex);
-	while (1) {
-		val = readl(&clk->mux_stat_lex);
-		if (val == (val | 1))
-			break;
-	}
-
-	writel(CLK_DIV_LEX_VAL, &clk->div_lex);
-	while (readl(&clk->div_stat_lex))
-		;
-
-	writel(CLK_DIV_R0X_VAL, &clk->div_r0x);
-	while (readl(&clk->div_stat_r0x))
-		;
-
-	writel(CLK_DIV_R0X_VAL, &clk->div_r0x);
-	while (readl(&clk->div_stat_r0x))
-		;
-
-	writel(CLK_DIV_R1X_VAL, &clk->div_r1x);
-	while (readl(&clk->div_stat_r1x))
-		;
-
-	writel(CLK_REG_DISABLE, &clk->src_cdrex);
-
-	writel(CLK_DIV_CDREX_VAL, &clk->div_cdrex);
-	while (readl(&clk->div_stat_cdrex))
-		;
-
-	val = readl(&clk->src_cpu);
-	val |= CLK_SRC_CPU_VAL;
-	writel(val, &clk->src_cpu);
-
-	val = readl(&clk->src_top2);
-	val |= CLK_SRC_TOP2_VAL;
-	writel(val, &clk->src_top2);
-
-	val = readl(&clk->src_core1);
-	val |= CLK_SRC_CORE1_VAL;
-	writel(val, &clk->src_core1);
-
-	writel(CLK_SRC_FSYS0_VAL, &clk->src_fsys);
-	writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0);
-	while (readl(&clk->div_stat_fsys0))
-		;
-
-	writel(CLK_REG_DISABLE, &clk->clkout_cmu_cpu);
-	writel(CLK_REG_DISABLE, &clk->clkout_cmu_core);
-	writel(CLK_REG_DISABLE, &clk->clkout_cmu_acp);
-	writel(CLK_REG_DISABLE, &clk->clkout_cmu_top);
-	writel(CLK_REG_DISABLE, &clk->clkout_cmu_lex);
-	writel(CLK_REG_DISABLE, &clk->clkout_cmu_r0x);
-	writel(CLK_REG_DISABLE, &clk->clkout_cmu_r1x);
-	writel(CLK_REG_DISABLE, &clk->clkout_cmu_cdrex);
-
-	writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0);
-	writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0);
-
-	writel(CLK_SRC_PERIC1_VAL, &clk->src_peric1);
-	writel(CLK_DIV_PERIC1_VAL, &clk->div_peric1);
-	writel(CLK_DIV_PERIC2_VAL, &clk->div_peric2);
-	writel(CLK_DIV_PERIC3_VAL, &clk->div_peric3);
-
-	writel(SCLK_SRC_ISP_VAL, &clk->sclk_src_isp);
-	writel(SCLK_DIV_ISP_VAL, &clk->sclk_div_isp);
-	writel(CLK_DIV_ISP0_VAL, &clk->div_isp0);
-	writel(CLK_DIV_ISP1_VAL, &clk->div_isp1);
-	writel(CLK_DIV_ISP2_VAL, &clk->div_isp2);
-
-	/* FIMD1 SRC CLK SELECTION */
-	writel(CLK_SRC_DISP1_0_VAL, &clk->src_disp1_0);
-
-	val = MMC2_PRE_RATIO_VAL << MMC2_PRE_RATIO_OFFSET
-		| MMC2_RATIO_VAL << MMC2_RATIO_OFFSET
-		| MMC3_PRE_RATIO_VAL << MMC3_PRE_RATIO_OFFSET
-		| MMC3_RATIO_VAL << MMC3_RATIO_OFFSET;
-	writel(val, &clk->div_fsys2);
-}
-
-void clock_init_dp_clock(void)
-{
-	struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
-
-	/* DP clock enable */
-	setbits_le32(&clk->gate_ip_disp1, CLK_GATE_DP1_ALLOW);
-
-	/* We run DP at 267 Mhz */
-	setbits_le32(&clk->div_disp1_0, CLK_DIV_DISP1_0_FIMD1);
-}
-
-/*
- * Set clock divisor value for booting from EMMC.
- * Set DWMMC channel-0 clk div to operate mmc0 device at 50MHz.
- */
-void emmc_boot_clk_div_set(void)
-{
-	struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
-	unsigned int div_mmc;
-
-	div_mmc = readl((unsigned int) &clk->div_fsys1) & ~FSYS1_MMC0_DIV_MASK;
-	div_mmc |= FSYS1_MMC0_DIV_VAL;
-	writel(div_mmc, (unsigned int) &clk->div_fsys1);
-}
diff --git a/board/samsung/smdk5250/clock_init.h b/board/samsung/smdk5250/clock_init.h
deleted file mode 100644
index 20a1d47e06d..00000000000
--- a/board/samsung/smdk5250/clock_init.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * Clock initialization routines
- *
- * Copyright (c) 2011 The Chromium OS Authors.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __EXYNOS_CLOCK_INIT_H
-#define __EXYNOS_CLOCK_INIT_H
-
-enum {
-	MEM_TIMINGS_MSR_COUNT	= 4,
-};
-
-/* These are the ratio's for configuring ARM clock */
-struct arm_clk_ratios {
-	unsigned arm_freq_mhz;		/* Frequency of ARM core in MHz */
-
-	unsigned apll_mdiv;
-	unsigned apll_pdiv;
-	unsigned apll_sdiv;
-
-	unsigned arm2_ratio;
-	unsigned apll_ratio;
-	unsigned pclk_dbg_ratio;
-	unsigned atb_ratio;
-	unsigned periph_ratio;
-	unsigned acp_ratio;
-	unsigned cpud_ratio;
-	unsigned arm_ratio;
-};
-
-/* These are the memory timings for a particular memory type and speed */
-struct mem_timings {
-	enum mem_manuf mem_manuf;	/* Memory manufacturer */
-	enum ddr_mode mem_type;		/* Memory type */
-	unsigned frequency_mhz;		/* Frequency of memory in MHz */
-
-	/* Here follow the timing parameters for the selected memory */
-	unsigned apll_mdiv;
-	unsigned apll_pdiv;
-	unsigned apll_sdiv;
-	unsigned mpll_mdiv;
-	unsigned mpll_pdiv;
-	unsigned mpll_sdiv;
-	unsigned cpll_mdiv;
-	unsigned cpll_pdiv;
-	unsigned cpll_sdiv;
-	unsigned gpll_mdiv;
-	unsigned gpll_pdiv;
-	unsigned gpll_sdiv;
-	unsigned epll_mdiv;
-	unsigned epll_pdiv;
-	unsigned epll_sdiv;
-	unsigned vpll_mdiv;
-	unsigned vpll_pdiv;
-	unsigned vpll_sdiv;
-	unsigned bpll_mdiv;
-	unsigned bpll_pdiv;
-	unsigned bpll_sdiv;
-	unsigned pclk_cdrex_ratio;
-	unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT];
-
-	unsigned timing_ref;
-	unsigned timing_row;
-	unsigned timing_data;
-	unsigned timing_power;
-
-	/* DQS, DQ, DEBUG offsets */
-	unsigned phy0_dqs;
-	unsigned phy1_dqs;
-	unsigned phy0_dq;
-	unsigned phy1_dq;
-	unsigned phy0_tFS;
-	unsigned phy1_tFS;
-	unsigned phy0_pulld_dqs;
-	unsigned phy1_pulld_dqs;
-
-	unsigned lpddr3_ctrl_phy_reset;
-	unsigned ctrl_start_point;
-	unsigned ctrl_inc;
-	unsigned ctrl_start;
-	unsigned ctrl_dll_on;
-	unsigned ctrl_ref;
-
-	unsigned ctrl_force;
-	unsigned ctrl_rdlat;
-	unsigned ctrl_bstlen;
-
-	unsigned fp_resync;
-	unsigned iv_size;
-	unsigned dfi_init_start;
-	unsigned aref_en;
-
-	unsigned rd_fetch;
-
-	unsigned zq_mode_dds;
-	unsigned zq_mode_term;
-	unsigned zq_mode_noterm;	/* 1 to allow termination disable */
-
-	unsigned memcontrol;
-	unsigned memconfig;
-
-	unsigned membaseconfig0;
-	unsigned membaseconfig1;
-	unsigned prechconfig_tp_cnt;
-	unsigned dpwrdn_cyc;
-	unsigned dsref_cyc;
-	unsigned concontrol;
-	/* Channel and Chip Selection */
-	uint8_t dmc_channels;		/* number of memory channels */
-	uint8_t chips_per_channel;	/* number of chips per channel */
-	uint8_t chips_to_configure;	/* number of chips to configure */
-	uint8_t send_zq_init;		/* 1 to send this command */
-	unsigned impedance;		/* drive strength impedeance */
-	uint8_t gate_leveling_enable;	/* check gate leveling is enabled */
-};
-
-/**
- * Get the correct memory timings for our selected memory type and speed.
- *
- * This function can be called from SPL or the main U-Boot.
- *
- * @return pointer to the memory timings that we should use
- */
-struct mem_timings *clock_get_mem_timings(void);
-
-/*
- * Initialize clock for the device
- */
-void system_clock_init(void);
-
-/*
- * Set clock divisor value for booting from EMMC.
- */
-void emmc_boot_clk_div_set(void);
-#endif
diff --git a/board/samsung/smdk5250/dmc_common.c b/board/samsung/smdk5250/dmc_common.c
deleted file mode 100644
index 109602a2e6a..00000000000
--- a/board/samsung/smdk5250/dmc_common.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * Mem setup common file for different types of DDR present on SMDK5250 boards.
- *
- * Copyright (C) 2012 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/spl.h>
-
-#include "clock_init.h"
-#include "setup.h"
-
-#define ZQ_INIT_TIMEOUT	10000
-
-int dmc_config_zq(struct mem_timings *mem,
-		  struct exynos5_phy_control *phy0_ctrl,
-		  struct exynos5_phy_control *phy1_ctrl)
-{
-	unsigned long val = 0;
-	int i;
-
-	/*
-	 * ZQ Calibration:
-	 * Select Driver Strength,
-	 * long calibration for manual calibration
-	 */
-	val = PHY_CON16_RESET_VAL;
-	val |= mem->zq_mode_dds << PHY_CON16_ZQ_MODE_DDS_SHIFT;
-	val |= mem->zq_mode_term << PHY_CON16_ZQ_MODE_TERM_SHIFT;
-	val |= ZQ_CLK_DIV_EN;
-	writel(val, &phy0_ctrl->phy_con16);
-	writel(val, &phy1_ctrl->phy_con16);
-
-	/* Disable termination */
-	if (mem->zq_mode_noterm)
-		val |= PHY_CON16_ZQ_MODE_NOTERM_MASK;
-	writel(val, &phy0_ctrl->phy_con16);
-	writel(val, &phy1_ctrl->phy_con16);
-
-	/* ZQ_MANUAL_START: Enable */
-	val |= ZQ_MANUAL_STR;
-	writel(val, &phy0_ctrl->phy_con16);
-	writel(val, &phy1_ctrl->phy_con16);
-
-	/* ZQ_MANUAL_START: Disable */
-	val &= ~ZQ_MANUAL_STR;
-
-	/*
-	 * Since we are manaully calibrating the ZQ values,
-	 * we are looping for the ZQ_init to complete.
-	 */
-	i = ZQ_INIT_TIMEOUT;
-	while ((readl(&phy0_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
-		sdelay(100);
-		i--;
-	}
-	if (!i)
-		return -1;
-	writel(val, &phy0_ctrl->phy_con16);
-
-	i = ZQ_INIT_TIMEOUT;
-	while ((readl(&phy1_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
-		sdelay(100);
-		i--;
-	}
-	if (!i)
-		return -1;
-	writel(val, &phy1_ctrl->phy_con16);
-
-	return 0;
-}
-
-void update_reset_dll(struct exynos5_dmc *dmc, enum ddr_mode mode)
-{
-	unsigned long val;
-
-	if (mode == DDR_MODE_DDR3) {
-		val = MEM_TERM_EN | PHY_TERM_EN | DMC_CTRL_SHGATE;
-		writel(val, &dmc->phycontrol0);
-	}
-
-	/* Update DLL Information: Force DLL Resyncronization */
-	val = readl(&dmc->phycontrol0);
-	val |= FP_RSYNC;
-	writel(val, &dmc->phycontrol0);
-
-	/* Reset Force DLL Resyncronization */
-	val = readl(&dmc->phycontrol0);
-	val &= ~FP_RSYNC;
-	writel(val, &dmc->phycontrol0);
-}
-
-void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
-{
-	int channel, chip;
-
-	for (channel = 0; channel < mem->dmc_channels; channel++) {
-		unsigned long mask;
-
-		mask = channel << DIRECT_CMD_CHANNEL_SHIFT;
-		for (chip = 0; chip < mem->chips_to_configure; chip++) {
-			int i;
-
-			mask |= chip << DIRECT_CMD_CHIP_SHIFT;
-
-			/* Sending NOP command */
-			writel(DIRECT_CMD_NOP | mask, &dmc->directcmd);
-
-			/*
-			 * TODO(alim.akhtar@samsung.com): Do we need these
-			 * delays? This one and the next were not there for
-			 * DDR3.
-			 */
-			sdelay(0x10000);
-
-			/* Sending EMRS/MRS commands */
-			for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) {
-				writel(mem->direct_cmd_msr[i] | mask,
-				       &dmc->directcmd);
-				sdelay(0x10000);
-			}
-
-			if (mem->send_zq_init) {
-				/* Sending ZQINIT command */
-				writel(DIRECT_CMD_ZQINIT | mask,
-				       &dmc->directcmd);
-
-				sdelay(10000);
-			}
-		}
-	}
-}
-
-void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc)
-{
-	int channel, chip;
-
-	for (channel = 0; channel < mem->dmc_channels; channel++) {
-		unsigned long mask;
-
-		mask = channel << DIRECT_CMD_CHANNEL_SHIFT;
-		for (chip = 0; chip < mem->chips_per_channel; chip++) {
-			mask |= chip << DIRECT_CMD_CHIP_SHIFT;
-
-			/* PALL (all banks precharge) CMD */
-			writel(DIRECT_CMD_PALL | mask, &dmc->directcmd);
-			sdelay(0x10000);
-		}
-	}
-}
-
-void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc)
-{
-	writel(mem->memconfig, &dmc->memconfig0);
-	writel(mem->memconfig, &dmc->memconfig1);
-	writel(DMC_MEMBASECONFIG0_VAL, &dmc->membaseconfig0);
-	writel(DMC_MEMBASECONFIG1_VAL, &dmc->membaseconfig1);
-}
-
-void mem_ctrl_init()
-{
-	struct spl_machine_param *param = spl_get_machine_params();
-	struct mem_timings *mem;
-	int ret;
-
-	mem = clock_get_mem_timings();
-
-	/* If there are any other memory variant, add their init call below */
-	if (param->mem_type == DDR_MODE_DDR3) {
-		ret = ddr3_mem_ctrl_init(mem, param->mem_iv_size);
-		if (ret) {
-			/* will hang if failed to init memory control */
-			while (1)
-				;
-		}
-	} else {
-		/* will hang if unknow memory type  */
-		while (1)
-			;
-	}
-}
diff --git a/board/samsung/smdk5250/dmc_init_ddr3.c b/board/samsung/smdk5250/dmc_init_ddr3.c
deleted file mode 100644
index e05079028a5..00000000000
--- a/board/samsung/smdk5250/dmc_init_ddr3.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * DDR3 mem setup file for SMDK5250 board based on EXYNOS5
- *
- * Copyright (C) 2012 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/dmc.h>
-#include "setup.h"
-#include "clock_init.h"
-
-#define RDLVL_COMPLETE_TIMEOUT	10000
-
-static void reset_phy_ctrl(void)
-{
-	struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
-
-	writel(DDR3PHY_CTRL_PHY_RESET_OFF, &clk->lpddr3phy_ctrl);
-	writel(DDR3PHY_CTRL_PHY_RESET, &clk->lpddr3phy_ctrl);
-}
-
-int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size)
-{
-	unsigned int val;
-	struct exynos5_phy_control *phy0_ctrl, *phy1_ctrl;
-	struct exynos5_dmc *dmc;
-	int i;
-
-	phy0_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY0_BASE;
-	phy1_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY1_BASE;
-	dmc = (struct exynos5_dmc *)EXYNOS5_DMC_CTRL_BASE;
-
-	reset_phy_ctrl();
-
-	/* Set Impedance Output Driver */
-	val = (mem->impedance << CA_CK_DRVR_DS_OFFSET) |
-		(mem->impedance << CA_CKE_DRVR_DS_OFFSET) |
-		(mem->impedance << CA_CS_DRVR_DS_OFFSET) |
-		(mem->impedance << CA_ADR_DRVR_DS_OFFSET);
-	writel(val, &phy0_ctrl->phy_con39);
-	writel(val, &phy1_ctrl->phy_con39);
-
-	/* Set Read Latency and Burst Length for PHY0 and PHY1 */
-	val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) |
-		(mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT);
-	writel(val, &phy0_ctrl->phy_con42);
-	writel(val, &phy1_ctrl->phy_con42);
-
-	/* ZQ Calibration */
-	if (dmc_config_zq(mem, phy0_ctrl, phy1_ctrl))
-		return SETUP_ERR_ZQ_CALIBRATION_FAILURE;
-
-	/* DQ Signal */
-	writel(mem->phy0_pulld_dqs, &phy0_ctrl->phy_con14);
-	writel(mem->phy1_pulld_dqs, &phy1_ctrl->phy_con14);
-
-	writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)
-		| (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT),
-		&dmc->concontrol);
-
-	update_reset_dll(dmc, DDR_MODE_DDR3);
-
-	/* DQS Signal */
-	writel(mem->phy0_dqs, &phy0_ctrl->phy_con4);
-	writel(mem->phy1_dqs, &phy1_ctrl->phy_con4);
-
-	writel(mem->phy0_dq, &phy0_ctrl->phy_con6);
-	writel(mem->phy1_dq, &phy1_ctrl->phy_con6);
-
-	writel(mem->phy0_tFS, &phy0_ctrl->phy_con10);
-	writel(mem->phy1_tFS, &phy1_ctrl->phy_con10);
-
-	val = (mem->ctrl_start_point << PHY_CON12_CTRL_START_POINT_SHIFT) |
-		(mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) |
-		(mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) |
-		(mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT);
-	writel(val, &phy0_ctrl->phy_con12);
-	writel(val, &phy1_ctrl->phy_con12);
-
-	/* Start DLL locking */
-	writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),
-		&phy0_ctrl->phy_con12);
-	writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),
-		&phy1_ctrl->phy_con12);
-
-	update_reset_dll(dmc, DDR_MODE_DDR3);
-
-	writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
-		&dmc->concontrol);
-
-	/* Memory Channel Inteleaving Size */
-	writel(mem->iv_size, &dmc->ivcontrol);
-
-	writel(mem->memconfig, &dmc->memconfig0);
-	writel(mem->memconfig, &dmc->memconfig1);
-	writel(mem->membaseconfig0, &dmc->membaseconfig0);
-	writel(mem->membaseconfig1, &dmc->membaseconfig1);
-
-	/* Precharge Configuration */
-	writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
-		&dmc->prechconfig);
-
-	/* Power Down mode Configuration */
-	writel(mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT |
-		mem->dsref_cyc << PWRDNCONFIG_DSREF_CYC_SHIFT,
-		&dmc->pwrdnconfig);
-
-	/* TimingRow, TimingData, TimingPower and Timingaref
-	 * values as per Memory AC parameters
-	 */
-	writel(mem->timing_ref, &dmc->timingref);
-	writel(mem->timing_row, &dmc->timingrow);
-	writel(mem->timing_data, &dmc->timingdata);
-	writel(mem->timing_power, &dmc->timingpower);
-
-	/* Send PALL command */
-	dmc_config_prech(mem, dmc);
-
-	/* Send NOP, MRS and ZQINIT commands */
-	dmc_config_mrs(mem, dmc);
-
-	if (mem->gate_leveling_enable) {
-		val = PHY_CON0_RESET_VAL;
-		val |= P0_CMD_EN;
-		writel(val, &phy0_ctrl->phy_con0);
-		writel(val, &phy1_ctrl->phy_con0);
-
-		val = PHY_CON2_RESET_VAL;
-		val |= INIT_DESKEW_EN;
-		writel(val, &phy0_ctrl->phy_con2);
-		writel(val, &phy1_ctrl->phy_con2);
-
-		val = PHY_CON0_RESET_VAL;
-		val |= P0_CMD_EN;
-		val |= BYTE_RDLVL_EN;
-		writel(val, &phy0_ctrl->phy_con0);
-		writel(val, &phy1_ctrl->phy_con0);
-
-		val = (mem->ctrl_start_point <<
-				PHY_CON12_CTRL_START_POINT_SHIFT) |
-			(mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) |
-			(mem->ctrl_force << PHY_CON12_CTRL_FORCE_SHIFT) |
-			(mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) |
-			(mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT);
-		writel(val, &phy0_ctrl->phy_con12);
-		writel(val, &phy1_ctrl->phy_con12);
-
-		val = PHY_CON2_RESET_VAL;
-		val |= INIT_DESKEW_EN;
-		val |= RDLVL_GATE_EN;
-		writel(val, &phy0_ctrl->phy_con2);
-		writel(val, &phy1_ctrl->phy_con2);
-
-		val = PHY_CON0_RESET_VAL;
-		val |= P0_CMD_EN;
-		val |= BYTE_RDLVL_EN;
-		val |= CTRL_SHGATE;
-		writel(val, &phy0_ctrl->phy_con0);
-		writel(val, &phy1_ctrl->phy_con0);
-
-		val = PHY_CON1_RESET_VAL;
-		val &= ~(CTRL_GATEDURADJ_MASK);
-		writel(val, &phy0_ctrl->phy_con1);
-		writel(val, &phy1_ctrl->phy_con1);
-
-		writel(CTRL_RDLVL_GATE_ENABLE, &dmc->rdlvl_config);
-		i = RDLVL_COMPLETE_TIMEOUT;
-		while ((readl(&dmc->phystatus) &
-			(RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1)) !=
-			(RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1) && i > 0) {
-			/*
-			 * TODO(waihong): Comment on how long this take to
-			 * timeout
-			 */
-			sdelay(100);
-			i--;
-		}
-		if (!i)
-			return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
-		writel(CTRL_RDLVL_GATE_DISABLE, &dmc->rdlvl_config);
-
-		writel(0, &phy0_ctrl->phy_con14);
-		writel(0, &phy1_ctrl->phy_con14);
-
-		val = (mem->ctrl_start_point <<
-				PHY_CON12_CTRL_START_POINT_SHIFT) |
-			(mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) |
-			(mem->ctrl_force << PHY_CON12_CTRL_FORCE_SHIFT) |
-			(mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) |
-			(mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) |
-			(mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT);
-		writel(val, &phy0_ctrl->phy_con12);
-		writel(val, &phy1_ctrl->phy_con12);
-
-		update_reset_dll(dmc, DDR_MODE_DDR3);
-	}
-
-	/* Send PALL command */
-	dmc_config_prech(mem, dmc);
-
-	writel(mem->memcontrol, &dmc->memcontrol);
-
-	/* Set DMC Concontrol and enable auto-refresh counter */
-	writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)
-		| (mem->aref_en << CONCONTROL_AREF_EN_SHIFT), &dmc->concontrol);
-	return 0;
-}
diff --git a/board/samsung/smdk5250/setup.h b/board/samsung/smdk5250/setup.h
deleted file mode 100644
index eb91d131092..00000000000
--- a/board/samsung/smdk5250/setup.h
+++ /dev/null
@@ -1,569 +0,0 @@
-/*
- * Machine Specific Values for SMDK5250 board based on EXYNOS5
- *
- * Copyright (C) 2012 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _SMDK5250_SETUP_H
-#define _SMDK5250_SETUP_H
-
-#include <config.h>
-#include <asm/arch/dmc.h>
-
-/* APLL_CON1	*/
-#define APLL_CON1_VAL	(0x00203800)
-
-/* MPLL_CON1	*/
-#define MPLL_CON1_VAL   (0x00203800)
-
-/* CPLL_CON1	*/
-#define CPLL_CON1_VAL	(0x00203800)
-
-/* GPLL_CON1	*/
-#define GPLL_CON1_VAL	(0x00203800)
-
-/* EPLL_CON1, CON2	*/
-#define EPLL_CON1_VAL	0x00000000
-#define EPLL_CON2_VAL	0x00000080
-
-/* VPLL_CON1, CON2	*/
-#define VPLL_CON1_VAL	0x00000000
-#define VPLL_CON2_VAL	0x00000080
-
-/* BPLL_CON1	*/
-#define BPLL_CON1_VAL	0x00203800
-
-/* Set PLL */
-#define set_pll(mdiv, pdiv, sdiv)	(1<<31 | mdiv<<16 | pdiv<<8 | sdiv)
-
-/* CLK_SRC_CPU	*/
-/* 0 = MOUTAPLL,  1 = SCLKMPLL	*/
-#define MUX_HPM_SEL             0
-#define MUX_CPU_SEL             0
-#define MUX_APLL_SEL            1
-
-#define CLK_SRC_CPU_VAL		((MUX_HPM_SEL << 20)    \
-				| (MUX_CPU_SEL << 16)  \
-				| (MUX_APLL_SEL))
-
-/* MEMCONTROL register bit fields */
-#define DMC_MEMCONTROL_CLK_STOP_DISABLE	(0 << 0)
-#define DMC_MEMCONTROL_DPWRDN_DISABLE	(0 << 1)
-#define DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE	(0 << 2)
-#define DMC_MEMCONTROL_TP_DISABLE	(0 << 4)
-#define DMC_MEMCONTROL_DSREF_DISABLE	(0 << 5)
-#define DMC_MEMCONTROL_DSREF_ENABLE	(1 << 5)
-#define DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(x)    (x << 6)
-
-#define DMC_MEMCONTROL_MEM_TYPE_LPDDR3  (7 << 8)
-#define DMC_MEMCONTROL_MEM_TYPE_DDR3    (6 << 8)
-#define DMC_MEMCONTROL_MEM_TYPE_LPDDR2  (5 << 8)
-
-#define DMC_MEMCONTROL_MEM_WIDTH_32BIT  (2 << 12)
-
-#define DMC_MEMCONTROL_NUM_CHIP_1       (0 << 16)
-#define DMC_MEMCONTROL_NUM_CHIP_2       (1 << 16)
-
-#define DMC_MEMCONTROL_BL_8             (3 << 20)
-#define DMC_MEMCONTROL_BL_4             (2 << 20)
-
-#define DMC_MEMCONTROL_PZQ_DISABLE      (0 << 24)
-
-#define DMC_MEMCONTROL_MRR_BYTE_7_0     (0 << 25)
-#define DMC_MEMCONTROL_MRR_BYTE_15_8    (1 << 25)
-#define DMC_MEMCONTROL_MRR_BYTE_23_16   (2 << 25)
-#define DMC_MEMCONTROL_MRR_BYTE_31_24   (3 << 25)
-
-/* MEMCONFIG0 register bit fields */
-#define DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED     (1 << 12)
-#define DMC_MEMCONFIGx_CHIP_COL_10              (3 << 8)
-#define DMC_MEMCONFIGx_CHIP_ROW_14              (2 << 4)
-#define DMC_MEMCONFIGx_CHIP_ROW_15              (3 << 4)
-#define DMC_MEMCONFIGx_CHIP_BANK_8              (3 << 0)
-
-#define DMC_MEMBASECONFIGx_CHIP_BASE(x)         (x << 16)
-#define DMC_MEMBASECONFIGx_CHIP_MASK(x)         (x << 0)
-#define DMC_MEMBASECONFIG_VAL(x)        (       \
-	DMC_MEMBASECONFIGx_CHIP_BASE(x) |       \
-	DMC_MEMBASECONFIGx_CHIP_MASK(0x780)     \
-)
-
-#define DMC_MEMBASECONFIG0_VAL  DMC_MEMBASECONFIG_VAL(0x40)
-#define DMC_MEMBASECONFIG1_VAL  DMC_MEMBASECONFIG_VAL(0x80)
-
-#define DMC_PRECHCONFIG_VAL             0xFF000000
-#define DMC_PWRDNCONFIG_VAL             0xFFFF00FF
-
-#define DMC_CONCONTROL_RESET_VAL	0x0FFF0000
-#define DFI_INIT_START		(1 << 28)
-#define EMPTY			(1 << 8)
-#define AREF_EN			(1 << 5)
-
-#define DFI_INIT_COMPLETE_CHO	(1 << 2)
-#define DFI_INIT_COMPLETE_CH1	(1 << 3)
-
-#define RDLVL_COMPLETE_CHO	(1 << 14)
-#define RDLVL_COMPLETE_CH1	(1 << 15)
-
-#define CLK_STOP_EN	(1 << 0)
-#define DPWRDN_EN	(1 << 1)
-#define DSREF_EN	(1 << 5)
-
-/* COJCONTROL register bit fields */
-#define DMC_CONCONTROL_IO_PD_CON_DISABLE	(0 << 3)
-#define DMC_CONCONTROL_AREF_EN_DISABLE		(0 << 5)
-#define DMC_CONCONTROL_EMPTY_DISABLE		(0 << 8)
-#define DMC_CONCONTROL_EMPTY_ENABLE		(1 << 8)
-#define DMC_CONCONTROL_RD_FETCH_DISABLE		(0x0 << 12)
-#define DMC_CONCONTROL_TIMEOUT_LEVEL0		(0xFFF << 16)
-#define DMC_CONCONTROL_DFI_INIT_START_DISABLE	(0 << 28)
-
-/* CLK_DIV_CPU0_VAL */
-#define CLK_DIV_CPU0_VAL	((ARM2_RATIO << 28)             \
-				| (APLL_RATIO << 24)            \
-				| (PCLK_DBG_RATIO << 20)        \
-				| (ATB_RATIO << 16)             \
-				| (PERIPH_RATIO << 12)          \
-				| (ACP_RATIO << 8)              \
-				| (CPUD_RATIO << 4)             \
-				| (ARM_RATIO))
-
-
-/* CLK_FSYS */
-#define CLK_SRC_FSYS0_VAL              0x66666
-#define CLK_DIV_FSYS0_VAL	       0x0BB00000
-
-/* CLK_DIV_CPU1	*/
-#define HPM_RATIO               0x2
-#define COPY_RATIO              0x0
-
-/* CLK_DIV_CPU1 = 0x00000003 */
-#define CLK_DIV_CPU1_VAL        ((HPM_RATIO << 4)		\
-				| (COPY_RATIO))
-
-/* CLK_SRC_CORE0 */
-#define CLK_SRC_CORE0_VAL       0x00000000
-
-/* CLK_SRC_CORE1 */
-#define CLK_SRC_CORE1_VAL       0x100
-
-/* CLK_DIV_CORE0 */
-#define CLK_DIV_CORE0_VAL       0x00120000
-
-/* CLK_DIV_CORE1 */
-#define CLK_DIV_CORE1_VAL       0x07070700
-
-/* CLK_DIV_SYSRGT */
-#define CLK_DIV_SYSRGT_VAL      0x00000111
-
-/* CLK_DIV_ACP */
-#define CLK_DIV_ACP_VAL         0x12
-
-/* CLK_DIV_SYSLFT */
-#define CLK_DIV_SYSLFT_VAL      0x00000311
-
-/* CLK_SRC_CDREX */
-#define CLK_SRC_CDREX_VAL       0x1
-
-/* CLK_DIV_CDREX */
-#define MCLK_CDREX2_RATIO       0x0
-#define ACLK_EFCON_RATIO        0x1
-#define MCLK_DPHY_RATIO		0x1
-#define MCLK_CDREX_RATIO	0x1
-#define ACLK_C2C_200_RATIO	0x1
-#define C2C_CLK_400_RATIO	0x1
-#define PCLK_CDREX_RATIO	0x1
-#define ACLK_CDREX_RATIO	0x1
-
-#define CLK_DIV_CDREX_VAL	((MCLK_DPHY_RATIO << 24)        \
-				| (C2C_CLK_400_RATIO << 6)	\
-				| (PCLK_CDREX_RATIO << 4)	\
-				| (ACLK_CDREX_RATIO))
-
-/* CLK_SRC_TOP0	*/
-#define MUX_ACLK_300_GSCL_SEL           0x0
-#define MUX_ACLK_300_GSCL_MID_SEL       0x0
-#define MUX_ACLK_400_G3D_MID_SEL        0x0
-#define MUX_ACLK_333_SEL	        0x0
-#define MUX_ACLK_300_DISP1_SEL	        0x0
-#define MUX_ACLK_300_DISP1_MID_SEL      0x0
-#define MUX_ACLK_200_SEL	        0x0
-#define MUX_ACLK_166_SEL	        0x0
-#define CLK_SRC_TOP0_VAL	((MUX_ACLK_300_GSCL_SEL  << 25)		\
-				| (MUX_ACLK_300_GSCL_MID_SEL << 24)	\
-				| (MUX_ACLK_400_G3D_MID_SEL << 20)	\
-				| (MUX_ACLK_333_SEL << 16)		\
-				| (MUX_ACLK_300_DISP1_SEL << 15)	\
-				| (MUX_ACLK_300_DISP1_MID_SEL << 14)	\
-				| (MUX_ACLK_200_SEL << 12)		\
-				| (MUX_ACLK_166_SEL << 8))
-
-/* CLK_SRC_TOP1	*/
-#define MUX_ACLK_400_G3D_SEL            0x1
-#define MUX_ACLK_400_ISP_SEL            0x0
-#define MUX_ACLK_400_IOP_SEL            0x0
-#define MUX_ACLK_MIPI_HSI_TXBASE_SEL    0x0
-#define MUX_ACLK_300_GSCL_MID1_SEL      0x0
-#define MUX_ACLK_300_DISP1_MID1_SEL     0x0
-#define CLK_SRC_TOP1_VAL	((MUX_ACLK_400_G3D_SEL << 28)           \
-				|(MUX_ACLK_400_ISP_SEL << 24)           \
-				|(MUX_ACLK_400_IOP_SEL << 20)           \
-				|(MUX_ACLK_MIPI_HSI_TXBASE_SEL << 16)   \
-				|(MUX_ACLK_300_GSCL_MID1_SEL << 12)     \
-				|(MUX_ACLK_300_DISP1_MID1_SEL << 8))
-
-/* CLK_SRC_TOP2 */
-#define MUX_GPLL_SEL                    0x1
-#define MUX_BPLL_USER_SEL               0x0
-#define MUX_MPLL_USER_SEL               0x0
-#define MUX_VPLL_SEL                    0x1
-#define MUX_EPLL_SEL                    0x1
-#define MUX_CPLL_SEL                    0x1
-#define VPLLSRC_SEL                     0x0
-#define CLK_SRC_TOP2_VAL	((MUX_GPLL_SEL << 28)		\
-				| (MUX_BPLL_USER_SEL << 24)	\
-				| (MUX_MPLL_USER_SEL << 20)	\
-				| (MUX_VPLL_SEL << 16)	        \
-				| (MUX_EPLL_SEL << 12)	        \
-				| (MUX_CPLL_SEL << 8)           \
-				| (VPLLSRC_SEL))
-/* CLK_SRC_TOP3 */
-#define MUX_ACLK_333_SUB_SEL            0x1
-#define MUX_ACLK_400_SUB_SEL            0x1
-#define MUX_ACLK_266_ISP_SUB_SEL        0x1
-#define MUX_ACLK_266_GPS_SUB_SEL        0x0
-#define MUX_ACLK_300_GSCL_SUB_SEL       0x1
-#define MUX_ACLK_266_GSCL_SUB_SEL       0x1
-#define MUX_ACLK_300_DISP1_SUB_SEL      0x1
-#define MUX_ACLK_200_DISP1_SUB_SEL      0x1
-#define CLK_SRC_TOP3_VAL	((MUX_ACLK_333_SUB_SEL << 24)	        \
-				| (MUX_ACLK_400_SUB_SEL << 20)	        \
-				| (MUX_ACLK_266_ISP_SUB_SEL << 16)	\
-				| (MUX_ACLK_266_GPS_SUB_SEL << 12)      \
-				| (MUX_ACLK_300_GSCL_SUB_SEL << 10)     \
-				| (MUX_ACLK_266_GSCL_SUB_SEL << 8)      \
-				| (MUX_ACLK_300_DISP1_SUB_SEL << 6)     \
-				| (MUX_ACLK_200_DISP1_SUB_SEL << 4))
-
-/* CLK_DIV_TOP0	*/
-#define ACLK_300_DISP1_RATIO	0x2
-#define ACLK_400_G3D_RATIO	0x0
-#define ACLK_333_RATIO		0x0
-#define ACLK_266_RATIO		0x2
-#define ACLK_200_RATIO		0x3
-#define ACLK_166_RATIO		0x1
-#define ACLK_133_RATIO		0x1
-#define ACLK_66_RATIO		0x5
-
-#define CLK_DIV_TOP0_VAL	((ACLK_300_DISP1_RATIO << 28)	\
-				| (ACLK_400_G3D_RATIO << 24)	\
-				| (ACLK_333_RATIO  << 20)	\
-				| (ACLK_266_RATIO << 16)	\
-				| (ACLK_200_RATIO << 12)	\
-				| (ACLK_166_RATIO << 8)		\
-				| (ACLK_133_RATIO << 4)		\
-				| (ACLK_66_RATIO))
-
-/* CLK_DIV_TOP1	*/
-#define ACLK_MIPI_HSI_TX_BASE_RATIO     0x3
-#define ACLK_66_PRE_RATIO               0x1
-#define ACLK_400_ISP_RATIO              0x1
-#define ACLK_400_IOP_RATIO              0x1
-#define ACLK_300_GSCL_RATIO             0x2
-
-#define CLK_DIV_TOP1_VAL	((ACLK_MIPI_HSI_TX_BASE_RATIO << 28)	\
-				| (ACLK_66_PRE_RATIO << 24)		\
-				| (ACLK_400_ISP_RATIO  << 20)		\
-				| (ACLK_400_IOP_RATIO << 16)		\
-				| (ACLK_300_GSCL_RATIO << 12))
-
-/* APLL_LOCK	*/
-#define APLL_LOCK_VAL	(0x546)
-/* MPLL_LOCK	*/
-#define MPLL_LOCK_VAL	(0x546)
-/* CPLL_LOCK	*/
-#define CPLL_LOCK_VAL	(0x546)
-/* GPLL_LOCK	*/
-#define GPLL_LOCK_VAL	(0x546)
-/* EPLL_LOCK	*/
-#define EPLL_LOCK_VAL	(0x3A98)
-/* VPLL_LOCK	*/
-#define VPLL_LOCK_VAL	(0x3A98)
-/* BPLL_LOCK	*/
-#define BPLL_LOCK_VAL	(0x546)
-
-#define MUX_APLL_SEL_MASK	(1 << 0)
-#define MUX_MPLL_SEL_MASK	(1 << 8)
-#define MPLL_SEL_MOUT_MPLLFOUT	(2 << 8)
-#define MUX_CPLL_SEL_MASK	(1 << 8)
-#define MUX_EPLL_SEL_MASK	(1 << 12)
-#define MUX_VPLL_SEL_MASK	(1 << 16)
-#define MUX_GPLL_SEL_MASK	(1 << 28)
-#define MUX_BPLL_SEL_MASK	(1 << 0)
-#define MUX_HPM_SEL_MASK	(1 << 20)
-#define HPM_SEL_SCLK_MPLL	(1 << 21)
-#define APLL_CON0_LOCKED	(1 << 29)
-#define MPLL_CON0_LOCKED	(1 << 29)
-#define BPLL_CON0_LOCKED	(1 << 29)
-#define CPLL_CON0_LOCKED	(1 << 29)
-#define EPLL_CON0_LOCKED	(1 << 29)
-#define GPLL_CON0_LOCKED	(1 << 29)
-#define VPLL_CON0_LOCKED	(1 << 29)
-#define CLK_REG_DISABLE		0x0
-#define TOP2_VAL		0x0110000
-
-/* CLK_SRC_PERIC0 */
-#define PWM_SEL		6
-#define UART3_SEL	6
-#define UART2_SEL	6
-#define UART1_SEL	6
-#define UART0_SEL	6
-/* SRC_CLOCK = SCLK_MPLL */
-#define CLK_SRC_PERIC0_VAL	((PWM_SEL << 24)        \
-				| (UART3_SEL << 12)     \
-				| (UART2_SEL << 8)       \
-				| (UART1_SEL << 4)      \
-				| (UART0_SEL))
-
-/* CLK_SRC_PERIC1 */
-/* SRC_CLOCK = SCLK_MPLL */
-#define SPI0_SEL		6
-#define SPI1_SEL		6
-#define SPI2_SEL		6
-#define CLK_SRC_PERIC1_VAL	((SPI2_SEL << 24) \
-				| (SPI1_SEL << 20) \
-				| (SPI0_SEL << 16))
-
-/* SCLK_SRC_ISP - set SPI0/1 to 6 = SCLK_MPLL_USER */
-#define SPI0_ISP_SEL		6
-#define SPI1_ISP_SEL		6
-#define SCLK_SRC_ISP_VAL	(SPI1_ISP_SEL << 4) \
-				| (SPI0_ISP_SEL << 0)
-
-/* SCLK_DIV_ISP - set SPI0/1 to 0xf = divide by 16 */
-#define SPI0_ISP_RATIO		0xf
-#define SPI1_ISP_RATIO		0xf
-#define SCLK_DIV_ISP_VAL	(SPI1_ISP_RATIO << 12) \
-				| (SPI0_ISP_RATIO << 0)
-
-/* CLK_DIV_PERIL0	*/
-#define UART5_RATIO	7
-#define UART4_RATIO	7
-#define UART3_RATIO	7
-#define UART2_RATIO	7
-#define UART1_RATIO	7
-#define UART0_RATIO	7
-
-#define CLK_DIV_PERIC0_VAL	((UART3_RATIO << 12)    \
-				| (UART2_RATIO << 8)    \
-				| (UART1_RATIO << 4)    \
-				| (UART0_RATIO))
-/* CLK_DIV_PERIC1 */
-#define SPI1_RATIO		0x7
-#define SPI0_RATIO		0xf
-#define SPI1_SUB_RATIO		0x0
-#define SPI0_SUB_RATIO		0x0
-#define CLK_DIV_PERIC1_VAL	((SPI1_SUB_RATIO << 24) \
-				| ((SPI1_RATIO << 16) \
-				| (SPI0_SUB_RATIO << 8) \
-				| (SPI0_RATIO << 0)))
-
-/* CLK_DIV_PERIC2 */
-#define SPI2_RATIO		0xf
-#define SPI2_SUB_RATIO		0x0
-#define CLK_DIV_PERIC2_VAL	((SPI2_SUB_RATIO << 8) \
-				| (SPI2_RATIO << 0))
-
-/* CLK_DIV_PERIC3 */
-#define PWM_RATIO		8
-#define CLK_DIV_PERIC3_VAL	(PWM_RATIO << 0)
-
-/* CLK_DIV_FSYS2 */
-#define MMC2_RATIO_MASK		0xf
-#define MMC2_RATIO_VAL		0x3
-#define MMC2_RATIO_OFFSET	0
-
-#define MMC2_PRE_RATIO_MASK	0xff
-#define MMC2_PRE_RATIO_VAL	0x9
-#define MMC2_PRE_RATIO_OFFSET	8
-
-#define MMC3_RATIO_MASK		0xf
-#define MMC3_RATIO_VAL		0x1
-#define MMC3_RATIO_OFFSET	16
-
-#define MMC3_PRE_RATIO_MASK	0xff
-#define MMC3_PRE_RATIO_VAL	0x0
-#define MMC3_PRE_RATIO_OFFSET	24
-
-/* CLK_SRC_LEX */
-#define CLK_SRC_LEX_VAL         0x0
-
-/* CLK_DIV_LEX */
-#define CLK_DIV_LEX_VAL         0x10
-
-/* CLK_DIV_R0X */
-#define CLK_DIV_R0X_VAL         0x10
-
-/* CLK_DIV_L0X */
-#define CLK_DIV_R1X_VAL         0x10
-
-/* CLK_DIV_ISP0 */
-#define CLK_DIV_ISP0_VAL        0x31
-
-/* CLK_DIV_ISP1 */
-#define CLK_DIV_ISP1_VAL        0x0
-
-/* CLK_DIV_ISP2 */
-#define CLK_DIV_ISP2_VAL        0x1
-
-/* CLK_SRC_DISP1_0 */
-#define CLK_SRC_DISP1_0_VAL	0x6
-
-/*
- * DIV_DISP1_0
- * For DP, divisor should be 2
- */
-#define CLK_DIV_DISP1_0_FIMD1	(2 << 0)
-
-/* CLK_GATE_IP_DISP1 */
-#define CLK_GATE_DP1_ALLOW	(1 << 4)
-
-#define DDR3PHY_CTRL_PHY_RESET	(1 << 0)
-#define DDR3PHY_CTRL_PHY_RESET_OFF	(0 << 0)
-
-#define PHY_CON0_RESET_VAL	0x17020a40
-#define P0_CMD_EN		(1 << 14)
-#define BYTE_RDLVL_EN		(1 << 13)
-#define CTRL_SHGATE		(1 << 8)
-
-#define PHY_CON1_RESET_VAL	0x09210100
-#define CTRL_GATEDURADJ_MASK	(0xf << 20)
-
-#define PHY_CON2_RESET_VAL	0x00010004
-#define INIT_DESKEW_EN		(1 << 6)
-#define RDLVL_GATE_EN		(1 << 24)
-
-/*ZQ Configurations */
-#define PHY_CON16_RESET_VAL	0x08000304
-
-#define ZQ_CLK_DIV_EN		(1 << 18)
-#define ZQ_MANUAL_STR		(1 << 1)
-#define ZQ_DONE			(1 << 0)
-
-#define CTRL_RDLVL_GATE_ENABLE	1
-#define CTRL_RDLVL_GATE_DISABLE	1
-
-/* Direct Command */
-#define DIRECT_CMD_NOP			0x07000000
-#define DIRECT_CMD_PALL			0x01000000
-#define DIRECT_CMD_ZQINIT		0x0a000000
-#define DIRECT_CMD_CHANNEL_SHIFT	28
-#define DIRECT_CMD_CHIP_SHIFT		20
-
-/* DMC PHY Control0 register */
-#define PHY_CONTROL0_RESET_VAL	0x0
-#define MEM_TERM_EN	(1 << 31)	/* Termination enable for memory */
-#define PHY_TERM_EN	(1 << 30)	/* Termination enable for PHY */
-#define DMC_CTRL_SHGATE	(1 << 29)	/* Duration of DQS gating signal */
-#define FP_RSYNC	(1 << 3)	/* Force DLL resyncronization */
-
-/* Driver strength for CK, CKE, CS & CA */
-#define IMP_OUTPUT_DRV_40_OHM	0x5
-#define IMP_OUTPUT_DRV_30_OHM	0x7
-#define CA_CK_DRVR_DS_OFFSET	9
-#define CA_CKE_DRVR_DS_OFFSET	6
-#define CA_CS_DRVR_DS_OFFSET	3
-#define CA_ADR_DRVR_DS_OFFSET	0
-
-#define PHY_CON42_CTRL_BSTLEN_SHIFT	8
-#define PHY_CON42_CTRL_RDLAT_SHIFT	0
-
-struct mem_timings;
-
-/* Errors that we can encourter in low-level setup */
-enum {
-	SETUP_ERR_OK,
-	SETUP_ERR_RDLV_COMPLETE_TIMEOUT = -1,
-	SETUP_ERR_ZQ_CALIBRATION_FAILURE = -2,
-};
-
-/*
- * Memory variant specific initialization code
- *
- * @param mem		Memory timings for this memory type.
- * @param mem_iv_size	Memory interleaving size is a configurable parameter
- *			which the DMC uses to decide how to split a memory
- *			chunk into smaller chunks to support concurrent
- *			accesses; may vary across boards.
- * @return 0 if ok, SETUP_ERR_... if there is a problem
- */
-int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size);
-
-/*
- * Configure ZQ I/O interface
- *
- * @param mem		Memory timings for this memory type.
- * @param phy0_ctrl	Pointer to struct containing PHY0 control reg
- * @param phy1_ctrl	Pointer to struct containing PHY1 control reg
- * @return 0 if ok, -1 on error
- */
-int dmc_config_zq(struct mem_timings *mem,
-		  struct exynos5_phy_control *phy0_ctrl,
-		  struct exynos5_phy_control *phy1_ctrl);
-
-/*
- * Send NOP and MRS/EMRS Direct commands
- *
- * @param mem		Memory timings for this memory type.
- * @param dmc		Pointer to struct of DMC registers
- */
-void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc);
-
-/*
- * Send PALL Direct commands
- *
- * @param mem		Memory timings for this memory type.
- * @param dmc		Pointer to struct of DMC registers
- */
-void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc);
-
-/*
- * Configure the memconfig and membaseconfig registers
- *
- * @param mem		Memory timings for this memory type.
- * @param exynos5_dmc	Pointer to struct of DMC registers
- */
-void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc);
-
-/*
- * Reset the DLL. This function is common between DDR3 and LPDDR2.
- * However, the reset value is different. So we are passing a flag
- * ddr_mode to distinguish between LPDDR2 and DDR3.
- *
- * @param exynos5_dmc	Pointer to struct of DMC registers
- * @param ddr_mode	Type of DDR memory
- */
-void update_reset_dll(struct exynos5_dmc *, enum ddr_mode);
-
-void sdelay(unsigned long);
-void mem_ctrl_init(void);
-void system_clock_init(void);
-#endif
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
index 276fd413285..f1d3d97fd68 100644
--- a/board/samsung/smdk5250/smdk5250.c
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -144,7 +144,7 @@ int power_init_board(void)
 
 	/* VDD_MIF */
 	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
-						MAX77686_BUCK1OUT_1V)) {
+						MAX77686_BUCK1OUT_1_05V)) {
 		debug("%s: PMIC %d register write failed\n", __func__,
 						MAX77686_REG_PMIC_BUCK1OUT);
 		return -1;
@@ -332,6 +332,16 @@ static int board_uart_init(void)
 	return ret;
 }
 
+void board_i2c_init(const void *blob)
+{
+	int i;
+
+	for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) {
+		exynos_pinmux_config((PERIPH_ID_I2C0 + i),
+				     PINMUX_FLAG_NONE);
+	}
+}
+
 #ifdef CONFIG_BOARD_EARLY_INIT_F
 int board_early_init_f(void)
 {
diff --git a/board/samsung/smdk5250/spl_boot.c b/board/samsung/smdk5250/spl_boot.c
deleted file mode 100644
index 98f2286f9ef..00000000000
--- a/board/samsung/smdk5250/spl_boot.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Copyright (C) 2012 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include<common.h>
-#include<config.h>
-
-#include <asm/arch-exynos/dmc.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/clk.h>
-
-#include "clock_init.h"
-
-/* Index into irom ptr table */
-enum index {
-	MMC_INDEX,
-	EMMC44_INDEX,
-	EMMC44_END_INDEX,
-	SPI_INDEX,
-	USB_INDEX,
-};
-
-/* IROM Function Pointers Table */
-u32 irom_ptr_table[] = {
-	[MMC_INDEX] = 0x02020030,	/* iROM Function Pointer-SDMMC boot */
-	[EMMC44_INDEX] = 0x02020044,	/* iROM Function Pointer-EMMC4.4 boot*/
-	[EMMC44_END_INDEX] = 0x02020048,/* iROM Function Pointer
-						-EMMC4.4 end boot operation */
-	[SPI_INDEX] = 0x02020058,	/* iROM Function Pointer-SPI boot */
-	[USB_INDEX] = 0x02020070,	/* iROM Function Pointer-USB boot*/
-	};
-
-enum boot_mode {
-	BOOT_MODE_MMC = 4,
-	BOOT_MODE_SERIAL = 20,
-	BOOT_MODE_EMMC = 8,     /* EMMC4.4 */
-	/* Boot based on Operating Mode pin settings */
-	BOOT_MODE_OM = 32,
-	BOOT_MODE_USB,	/* Boot using USB download */
-};
-
-void *get_irom_func(int index)
-{
-	return (void *)*(u32 *)irom_ptr_table[index];
-}
-
-/*
- * Set/clear program flow prediction and return the previous state.
- */
-static int config_branch_prediction(int set_cr_z)
-{
-	unsigned int cr;
-
-	/* System Control Register: 11th bit Z Branch prediction enable */
-	cr = get_cr();
-	set_cr(set_cr_z ? cr | CR_Z : cr & ~CR_Z);
-
-	return cr & CR_Z;
-}
-
-/*
-* Copy U-boot from mmc to RAM:
-* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
-* Pointer to API (Data transfer from mmc to ram)
-*/
-void copy_uboot_to_ram(void)
-{
-	int is_cr_z_set;
-	unsigned int sec_boot_check;
-	enum boot_mode bootmode = BOOT_MODE_OM;
-
-	u32 (*spi_copy)(u32 offset, u32 nblock, u32 dst);
-	u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst);
-	u32 (*copy_bl2_from_emmc)(u32 nblock, u32 dst);
-	void (*end_bootop_from_emmc)(void);
-	u32 (*usb_copy)(void);
-
-	/* Read iRAM location to check for secondary USB boot mode */
-	sec_boot_check = readl(EXYNOS_IRAM_SECONDARY_BASE);
-	if (sec_boot_check == EXYNOS_USB_SECONDARY_BOOT)
-		bootmode = BOOT_MODE_USB;
-
-	if (bootmode == BOOT_MODE_OM)
-		bootmode = readl(EXYNOS5_POWER_BASE) & OM_STAT;
-
-	switch (bootmode) {
-	case BOOT_MODE_SERIAL:
-		spi_copy = get_irom_func(SPI_INDEX);
-		spi_copy(SPI_FLASH_UBOOT_POS, CONFIG_BL2_SIZE,
-			 CONFIG_SYS_TEXT_BASE);
-		break;
-	case BOOT_MODE_MMC:
-		copy_bl2 = get_irom_func(MMC_INDEX);
-		copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT,
-			 CONFIG_SYS_TEXT_BASE);
-		break;
-	case BOOT_MODE_EMMC:
-		/* Set the FSYS1 clock divisor value for EMMC boot */
-		emmc_boot_clk_div_set();
-
-		copy_bl2_from_emmc = get_irom_func(EMMC44_INDEX);
-		end_bootop_from_emmc = get_irom_func(EMMC44_END_INDEX);
-
-		copy_bl2_from_emmc(BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
-		end_bootop_from_emmc();
-		break;
-	case BOOT_MODE_USB:
-		/*
-		 * iROM needs program flow prediction to be disabled
-		 * before copy from USB device to RAM
-		 */
-		is_cr_z_set = config_branch_prediction(0);
-		usb_copy = get_irom_func(USB_INDEX);
-		usb_copy();
-		config_branch_prediction(is_cr_z_set);
-		break;
-	default:
-		break;
-	}
-}
-
-void board_init_f(unsigned long bootflag)
-{
-	__attribute__((noreturn)) void (*uboot)(void);
-	copy_uboot_to_ram();
-
-	/* Jump to U-Boot image */
-	uboot = (void *)CONFIG_SYS_TEXT_BASE;
-	(*uboot)();
-	/* Never returns Here */
-}
-
-/* Place Holders */
-void board_init_r(gd_t *id, ulong dest_addr)
-{
-	/* Function attribute is no-return */
-	/* This Function never executes */
-	while (1)
-		;
-}
-void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {}
diff --git a/board/samsung/smdkv310/Makefile b/board/samsung/smdkv310/Makefile
index 56e0c16eb72..c4cd0a3fb20 100644
--- a/board/samsung/smdkv310/Makefile
+++ b/board/samsung/smdkv310/Makefile
@@ -24,18 +24,12 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
-SOBJS	:= mem_setup.o
-SOBJS	+= lowlevel_init.o
 ifndef CONFIG_SPL_BUILD
 COBJS	+= smdkv310.o
 endif
 
-ifdef CONFIG_SPL_BUILD
-COBJS	+= mmc_boot.o
-endif
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
 
 ALL	:=	 $(obj).depend $(LIB)
 
diff --git a/board/samsung/smdkv310/lowlevel_init.S b/board/samsung/smdkv310/lowlevel_init.S
deleted file mode 100644
index 31e0e2edaf1..00000000000
--- a/board/samsung/smdkv310/lowlevel_init.S
+++ /dev/null
@@ -1,414 +0,0 @@
-/*
- * Lowlevel setup for SMDKV310 board based on EXYNOS4210
- *
- * Copyright (C) 2011 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/cpu.h>
-
-/*
- * Register usages:
- *
- * r5 has zero always
- * r7 has GPIO part1 base 0x11400000
- * r6 has GPIO part2 base 0x11000000
- */
-
-#define MEM_DLLl_ON
-
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE
-
-	.globl lowlevel_init
-lowlevel_init:
-	push	{lr}
-
-	/* r5 has always zero */
-	mov	r5, #0
-	ldr	r7, =EXYNOS4_GPIO_PART1_BASE
-	ldr	r6, =EXYNOS4_GPIO_PART2_BASE
-
-	/* check reset status  */
-	ldr     r0, =(EXYNOS4_POWER_BASE + 0x81C)	@ INFORM7
-	ldr     r1, [r0]
-
-	/* AFTR wakeup reset */
-	ldr	r2, =S5P_CHECK_DIDLE
-	cmp	r1, r2
-	beq	exit_wakeup
-
-	/* Sleep wakeup reset */
-	ldr	r2, =S5P_CHECK_SLEEP
-	cmp	r1, r2
-	beq	wakeup_reset
-
-	/*
-	 * If U-boot is already running in ram, no need to relocate U-Boot.
-	 * Memory controller must be configured before relocating U-Boot
-	 * in ram.
-	 */
-	ldr	r0, =0x00ffffff		/* r0 <- Mask Bits*/
-	bic	r1, pc, r0		/* pc <- current addr of code */
-					/* r1 <- unmasked bits of pc */
-
-	ldr	r2, _TEXT_BASE		/* r2 <- original base addr in ram */
-	bic	r2, r2, r0		/* r2 <- unmasked bits of r2*/
-	cmp     r1, r2                  /* compare r1, r2 */
-	beq     1f			/* r0 == r1 then skip sdram init */
-
-	/* init system clock */
-	bl system_clock_init
-
-	/* Memory initialize */
-	bl mem_ctrl_asm_init
-
-1:
-	/* for UART */
-	bl uart_asm_init
-	bl arch_cpu_init
-	bl tzpc_init
-	pop	{pc}
-
-wakeup_reset:
-	bl system_clock_init
-	bl mem_ctrl_asm_init
-	bl arch_cpu_init
-	bl tzpc_init
-
-exit_wakeup:
-	/* Load return address and jump to kernel */
-	ldr     r0, =(EXYNOS4_POWER_BASE + 0x800)	@ INFORM0
-
-	/* r1 = physical address of exynos4210_cpu_resume function */
-	ldr	r1, [r0]
-
-	/* Jump to kernel*/
-	mov	pc, r1
-	nop
-	nop
-
-/*
- * system_clock_init: Initialize core clock and bus clock.
- * void system_clock_init(void)
- */
-system_clock_init:
-	push	{lr}
-	ldr	r0, =EXYNOS4_CLOCK_BASE
-
-	/* APLL(1), MPLL(1), CORE(0), HPM(0) */
-	ldr	r1, =0x0101
-	ldr	r2, =0x14200			@CLK_SRC_CPU
-	str	r1, [r0, r2]
-
-	/* wait ?us */
-	mov	r1, #0x10000
-2:	subs	r1, r1, #1
-	bne	2b
-
-	ldr	r1, =0x00
-	ldr	r2, =0x0C210			@CLK_SRC_TOP0
-	str	r1, [r0, r2]
-
-	ldr	r1, =0x00
-	ldr	r2, =0x0C214			@CLK_SRC_TOP1_OFFSET
-	str	r1, [r0, r2]
-
-	/* DMC */
-	ldr	r1, =0x00
-	ldr	r2, =0x10200			@CLK_SRC_DMC_OFFSET
-	str	r1, [r0, r2]
-
-	/*CLK_SRC_LEFTBUS */
-	ldr	r1, =0x00
-	ldr	r2, =0x04200			@CLK_SRC_LEFTBUS_OFFSET
-	str	r1, [r0, r2]
-
-	/*CLK_SRC_RIGHTBUS */
-	ldr	r1, =0x00
-	ldr	r2, =0x08200			@CLK_SRC_RIGHTBUS_OFFSET
-	str	r1, [r0, r2]
-
-	/* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
-	ldr	r1, =0x066666
-	ldr	r2, =0x0C240			@ CLK_SRC_FSYS
-	str	r1, [r0, r2]
-
-	/* UART[0:4], PWM: SCLKMPLL(6) */
-	ldr	r1, =0x06666666
-	ldr	r2, =0x0C250			@CLK_SRC_PERIL0_OFFSET
-	str	r1, [r0, r2]
-
-	/* wait ?us */
-	mov	r1, #0x10000
-3:	subs	r1, r1, #1
-	bne	3b
-
-	/*
-	 * CLK_DIV_CPU0:
-	 *
-	 * PCLK_DBG_RATIO[20]	0x1
-	 * ATB_RATIO[16]	0x3
-	 * PERIPH_RATIO[12]	0x3
-	 * COREM1_RATIO[8]	0x7
-	 * COREM0_RATIO[4]	0x3
-	 */
-	ldr	r1, =0x0133730
-	ldr	r2, =0x14500			@CLK_DIV_CPU0_OFFSET
-	str	r1, [r0, r2]
-
-	/* CLK_DIV_CPU1: COPY_RATIO [0]	0x3 */
-	ldr	r1, =0x03
-	ldr	r2, =0x14504			@CLK_DIV_CPU1_OFFSET
-	str	r1, [r0, r2]
-
-	/*
-	 * CLK_DIV_DMC0:
-	 *
-	 * CORE_TIMERS_RATIO[28]	0x1
-	 * COPY2_RATIO[24]	0x3
-	 * DMCP_RATIO[20]	0x1
-	 * DMCD_RATIO[16]	0x1
-	 * DMC_RATIO[12]	0x1
-	 * DPHY_RATIO[8]	0x1
-	 * ACP_PCLK_RATIO[4]	0x1
-	 * ACP_RATIO[0]		0x3
-	 */
-	ldr	r1, =0x13111113
-	ldr	r2, =0x010500			@CLK_DIV_DMC0_OFFSET
-	str	r1, [r0, r2]
-
-	/*
-	 * CLK_DIV_DMC1:
-	 *
-	 * DPM_RATIO[24]	0x1
-	 * DVSEM_RATIO[16]	0x1
-	 * PWI_RATIO[8]		0x1
-	 */
-	ldr	r1, =0x01010100
-	ldr	r2, =0x010504			@CLK_DIV_DMC1_OFFSET
-	str	r1, [r0, r2]
-
-	/*
-	 * CLK_DIV_LEFRBUS:
-	 *
-	 * GPL_RATIO[4]		0x1
-	 * GDL_RATIO[0]		0x3
-	 */
-	ldr	r1, =0x013
-	ldr	r2, =0x04500			@CLK_DIV_LEFTBUS_OFFSET
-	str	r1, [r0, r2]
-
-	/*
-	 * CLK_DIV_RIGHTBUS:
-	 *
-	 * GPR_RATIO[4]		0x1
-	 * GDR_RATIO[0]		0x3
-	 */
-	ldr	r1, =0x013
-	ldr	r2, =0x08500			@CLK_DIV_RIGHTBUS_OFFSET
-	str	r1, [r0, r2]
-
-	/*
-	 * CLK_DIV_TOP:
-	 *
-	 * ONENAND_RATIO[16]	0x0
-	 * ACLK_133_RATIO[12]	0x5
-	 * ACLK_160_RATIO[8]	0x4
-	 * ACLK_100_RATIO[4]	0x7
-	 * ACLK_200_RATIO[0]	0x3
-	 */
-	ldr	r1, =0x05473
-	ldr	r2, =0x0C510			@CLK_DIV_TOP_OFFSET
-	str	r1, [r0, r2]
-
-	/* MMC[0:1] */
-	ldr	r1, =0x000f000f			/* 800(MPLL) / (15 + 1) */
-	ldr	r2, =0x0C544			@ CLK_DIV_FSYS1
-	str	r1, [r0, r2]
-
-	/* MMC[2:3] */
-	ldr	r1, =0x000f000f			/* 800(MPLL) / (15 + 1) */
-	ldr	r2, =0x0C548			@ CLK_DIV_FSYS2
-	str	r1, [r0, r2]
-
-	/* MMC4 */
-	ldr	r1, =0x000f			/* 800(MPLL) / (15 + 1) */
-	ldr	r2, =0x0C54C			@ CLK_DIV_FSYS3
-	str	r1, [r0, r2]
-
-	/* wait ?us */
-	mov	r1, #0x10000
-4:	subs	r1, r1, #1
-	bne	4b
-
-	/*
-	 * CLK_DIV_PERIL0:
-	 *
-	 * UART5_RATIO[20]	8
-	 * UART4_RATIO[16]	8
-	 * UART3_RATIO[12]	8
-	 * UART2_RATIO[8]	8
-	 * UART1_RATIO[4]	8
-	 * UART0_RATIO[0]	8
-	 */
-	ldr	r1, =0x774777
-	ldr	r2, =0x0C550			@CLK_DIV_PERIL0_OFFSET
-	str	r1, [r0, r2]
-
-	/* SLIMBUS: ???, PWM */
-	ldr	r1, =0x8
-	ldr	r2, =0x0C55C			@ CLK_DIV_PERIL3
-	str	r1, [r0, r2]
-
-	/* Set PLL locktime */
-	ldr	r1, =0x01C20
-	ldr	r2, =0x014000			@APLL_LOCK_OFFSET
-	str	r1, [r0, r2]
-	ldr	r1, =0x01C20
-	ldr	r2, =0x014008			@MPLL_LOCK_OFFSET
-	str	r1, [r0, r2]
-	ldr	r1, =0x01C20
-	ldr	r2, =0x0C010			@EPLL_LOCK_OFFSET
-	str	r1, [r0, r2]
-	ldr	r1, =0x01C20
-	ldr	r2, =0x0C020			@VPLL_LOCK_OFFSET
-	str	r1, [r0, r2]
-
-	/*
-	 * APLL_CON1:
-	 *
-	 * APLL_AFC_ENB[31]	0x1
-	 * APLL_AFC[0]		0xC
-	 */
-	ldr	r1, =0x8000000C
-	ldr	r2, =0x014104			@APLL_CON1_OFFSET
-	str	r1, [r0, r2]
-
-	/*
-	 * APLL_CON0:
-	 *
-	 * APLL_MDIV[16]	0xFA
-	 * APLL_PDIV[8]		0x6
-	 * APLL_SDIV[0]		0x1
-	 */
-	ldr	r1, =0x80FA0601
-	ldr	r2, =0x014100			@APLL_CON0_OFFSET
-	str	r1, [r0, r2]
-
-	/*
-	 * MPLL_CON1:
-	 *
-	 * MPLL_AFC_ENB[31]	0x1
-	 * MPLL_AFC[0]		0x1C
-	 */
-	ldr	r1, =0x0000001C
-	ldr	r2, =0x01410C			@MPLL_CON1_OFFSET
-	str	r1, [r0, r2]
-
-	/*
-	 * MPLL_CON0:
-	 *
-	 * MPLL_MDIV[16]	0xC8
-	 * MPLL_PDIV[8]		0x6
-	 * MPLL_SDIV[0]		0x1
-	 */
-	ldr	r1, =0x80C80601
-	ldr	r2, =0x014108			@MPLL_CON0_OFFSET
-	str	r1, [r0, r2]
-
-	/* EPLL */
-	ldr	r1, =0x0
-	ldr	r2, =0x0C114			@EPLL_CON1_OFFSET
-	str	r1, [r0, r2]
-
-	/*
-	 * EPLL_CON0:
-	 *
-	 * EPLL_MDIV[16]	0x30
-	 * EPLL_PDIV[8]		0x3
-	 * EPLL_SDIV[0]		0x2
-	 */
-	ldr	r1, =0x80300302
-	ldr	r2, =0x0C110			@EPLL_CON0_OFFSET
-	str	r1, [r0, r2]
-
-	/*
-	 * VPLL_CON1:
-	 *
-	 * VPLL_MRR[24]		0x11
-	 * VPLL_MFR[16]		0x0
-	 * VPLL_K[0]		0x400
-	 */
-	ldr	r1, =0x11000400
-	ldr	r2, =0x0C124			@VPLL_CON1_OFFSET
-	str	r1, [r0, r2]
-
-	/*
-	 * VPLL_CON0:
-	 *
-	 * VPLL_MDIV[16]	0x35
-	 * VPLL_PDIV[8]		0x3
-	 * VPLL_SDIV[0]		0x2
-	 */
-	ldr	r1, =0x80350302
-	ldr	r2, =0x0C120			@VPLL_CON0_OFFSET
-	str	r1, [r0, r2]
-
-	/* wait ?us */
-	mov	r1, #0x30000
-3:	subs	r1, r1, #1
-	bne	3b
-
-	pop	{pc}
-/*
- * uart_asm_init: Initialize UART in asm mode, 115200bps fixed.
- * void uart_asm_init(void)
- */
-	.globl uart_asm_init
-uart_asm_init:
-
-	/* setup UART0-UART3 GPIOs (part1) */
-	mov	r0, r7
-	ldr	r1, =0x22222222
-	str	r1, [r0, #0x00]			@ EXYNOS4_GPIO_A0_OFFSET
-	ldr	r1, =0x00222222
-	str	r1, [r0, #0x20]			@ EXYNOS4_GPIO_A1_OFFSET
-
-	ldr r0, =EXYNOS4_UART_BASE
-	add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET
-
-	ldr r1, =0x3C5
-	str	r1, [r0, #0x4]
-	ldr r1, =0x111
-	str	r1, [r0, #0x8]
-	ldr r1, =0x3
-	str	r1, [r0, #0x0]
-	ldr r1, =0x35
-	str	r1, [r0, #0x28]
-	ldr r1, =0x4
-	str	r1, [r0, #0x2c]
-
-	mov	pc, lr
-	nop
-	nop
-	nop
diff --git a/board/samsung/smdkv310/mem_setup.S b/board/samsung/smdkv310/mem_setup.S
deleted file mode 100644
index d3b62659714..00000000000
--- a/board/samsung/smdkv310/mem_setup.S
+++ /dev/null
@@ -1,365 +0,0 @@
-/*
- * Memory setup for SMDKV310 board based on EXYNOS4210
- *
- * Copyright (C) 2011 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-
-#define SET_MIU
-
-#define MEM_DLL
-
-#ifdef CONFIG_CLK_800_330_165
-#define DRAM_CLK_330
-#endif
-#ifdef CONFIG_CLK_1000_200_200
-#define DRAM_CLK_200
-#endif
-#ifdef CONFIG_CLK_1000_330_165
-#define DRAM_CLK_330
-#endif
-#ifdef CONFIG_CLK_1000_400_200
-#define DRAM_CLK_400
-#endif
-
-	.globl mem_ctrl_asm_init
-mem_ctrl_asm_init:
-
-	/*
-	* Async bridge configuration at CPU_core:
-	* 1: half_sync
-	* 0: full_sync
-	*/
-	ldr r0, =0x10010350
-	mov r1, #1
-	str r1, [r0]
-
-#ifdef SET_MIU
-	ldr	r0, =EXYNOS4_MIU_BASE	@0x10600000
-#ifdef CONFIG_MIU_1BIT_INTERLEAVED
-	ldr	r1, =0x0000000c
-	str	r1, [r0, #0x400]	@MIU_INTLV_CONFIG
-	ldr	r1, =0x40000000
-	str	r1, [r0, #0x808]	@MIU_INTLV_START_ADDR
-	ldr	r1, =0xbfffffff
-	str	r1, [r0, #0x810]	@MIU_INTLV_END_ADDR
-	ldr	r1, =0x00000001
-	str	r1, [r0, #0x800]	@MIU_MAPPING_UPDATE
-#endif
-#ifdef CONFIG_MIU_2BIT_INTERLEAVED
-	ldr	r1, =0x2000150c
-	str	r1, [r0, #0x400]	@MIU_INTLV_CONFIG
-	ldr	r1, =0x40000000
-	str	r1, [r0, #0x808]	@MIU_INTLV_START_ADDR
-	ldr	r1, =0xbfffffff
-	str	r1, [r0, #0x810]	@MIU_INTLV_END_ADDR
-	ldr	r1, =0x00000001
-	str	r1, [r0, #0x800]	@MIU_MAPPING_UPDATE
-#endif
-#ifdef CONFIG_MIU_LINEAR
-	ldr	r1, =0x40000000
-	str	r1, [r0, #0x818]	@MIU_SINGLE_MAPPING0_START_ADDR
-	ldr	r1, =0x7fffffff
-	str	r1, [r0, #0x820]	@MIU_SINGLE_MAPPING0_END_ADDR
-	ldr	r1, =0x80000000
-	str	r1, [r0, #0x828]	@MIU_SINGLE_MAPPING1_START_ADDR
-	ldr	r1, =0xbfffffff
-	str	r1, [r0, #0x830]	@MIU_SINGLE_MAPPING1_END_ADDR]
-	ldr	r1, =0x00000006
-	str	r1, [r0, #0x800]	@MIU_MAPPING_UPDATE
-#endif
-#endif
-	/* DREX0 */
-	ldr	r0, =EXYNOS4_DMC0_BASE	@0x10400000
-
-	ldr	r1, =0xe0000086
-	str	r1, [r0, #0x1C]		@DMC_PHYCONTROL1
-
-	ldr	r1, =0xE3855703
-	str	r1, [r0, #0x44]		@DMC_PHYZQCONTROL
-
-	mov	r2, #0x100000
-1:	subs	r2, r2, #1
-	bne	1b
-
-	ldr	r1, =0xe000008e
-	str	r1, [r0, #0x1C]		@DMC_PHYCONTROL1
-	ldr	r1, =0xe0000086
-	str	r1, [r0, #0x1C]		@DMC_PHYCONTROL1
-
-	ldr	r1, =0x71101008
-	str	r1, [r0, #0x18]		@DMC_PHYCONTROL0
-	ldr	r1, =0x7110100A
-	str	r1, [r0, #0x18]		@DMC_PHYCONTROL0
-	ldr	r1, =0xe0000086
-	str	r1, [r0, #0x1C]		@DMC_PHYCONTROL1
-	ldr	r1, =0x7110100B
-	str	r1, [r0, #0x18]		@DMC_PHYCONTROL0
-
-	ldr	r1, =0x00000000
-	str	r1, [r0, #0x20]		@DMC_PHYCONTROL2
-
-	ldr	r1, =0x0FFF301a
-	str	r1, [r0, #0x00]		@DMC_CONCONTROL
-	ldr	r1, =0x00312640
-	str	r1, [r0, #0x04]		@DMC_MEMCONTROL]
-
-#ifdef CONFIG_MIU_LINEAR
-	ldr	r1, =0x40e01323
-	str	r1, [r0, #0x08]		@DMC_MEMCONFIG0
-	ldr	r1, =0x60e01323
-	str	r1, [r0, #0x0C]		@DMC_MEMCONFIG1
-#else	/* @MIU_1BIT_INTERLEAVED | MIU_2BIT_INTERLEAVED */
-	ldr	r1, =0x20e01323
-	str	r1, [r0, #0x08]		@DMC_MEMCONFIG0
-	ldr	r1, =0x40e01323
-	str	r1, [r0, #0x0C]		@DMC_MEMCONFIG1
-#endif
-
-	ldr	r1, =0xff000000
-	str	r1, [r0, #0x14]		@DMC_PRECHCONFIG
-
-	ldr	r1, =0x000000BC
-	str	r1, [r0, #0x30]		@DMC_TIMINGAREF
-
-#ifdef DRAM_CLK_330
-	ldr	r1, =0x3545548d
-	str	r1, [r0, #0x34]		@DMC_TIMINGROW
-	ldr	r1, =0x45430506
-	str	r1, [r0, #0x38]		@DMC_TIMINGDATA
-	ldr	r1, =0x4439033c
-	str	r1, [r0, #0x3C]		@DMC_TIMINGPOWER
-#endif
-#ifdef DRAM_CLK_400
-	ldr	r1, =0x4046654f
-	str	r1, [r0, #0x34]		@DMC_TIMINGROW
-	ldr	r1, =0x56500506
-	str	r1, [r0, #0x38]		@DMC_TIMINGDATA
-	ldr	r1, =0x5444033d
-	str	r1, [r0, #0x3C]		@DMC_TIMINGPOWER
-#endif
-	ldr	r1, =0x07000000
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-
-	mov	r2, #0x100000
-2:	subs	r2, r2, #1
-	bne	2b
-
-	ldr	r1, =0x00020000
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-	ldr	r1, =0x00030000
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-	ldr	r1, =0x00010002
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-	ldr	r1, =0x00000328
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-
-	mov	r2, #0x100000
-3:	subs	r2, r2, #1
-	bne	3b
-
-	ldr	r1, =0x0a000000
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-
-	mov	r2, #0x100000
-4:	subs	r2, r2, #1
-	bne	4b
-
-	ldr	r1, =0x07100000
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-
-	mov	r2, #0x100000
-5:	subs	r2, r2, #1
-	bne	5b
-
-	ldr	r1, =0x00120000
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-	ldr	r1, =0x00130000
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-	ldr	r1, =0x00110002
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-	ldr	r1, =0x00100328
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-
-	mov	r2, #0x100000
-6:	subs	r2, r2, #1
-	bne	6b
-
-	ldr	r1, =0x0a100000
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-
-	mov	r2, #0x100000
-7:	subs	r2, r2, #1
-	bne	7b
-
-	ldr	r1, =0xe000008e
-	str	r1, [r0, #0x1C]		@DMC_PHYCONTROL1
-	ldr	r1, =0xe0000086
-	str	r1, [r0, #0x1C]		@DMC_PHYCONTROL1
-
-	mov	r2, #0x100000
-8:	subs	r2, r2, #1
-	bne	8b
-
-	/* DREX1 */
-	ldr	r0, =EXYNOS4_DMC1_BASE	@0x10410000
-
-	ldr	r1, =0xe0000086
-	str	r1, [r0, #0x1C]		@DMC_PHYCONTROL1
-
-	ldr	r1, =0xE3855703
-	str	r1, [r0, #0x44]		@DMC_PHYZQCONTROL
-
-	mov	r2, #0x100000
-1:	subs	r2, r2, #1
-	bne	1b
-
-	ldr	r1, =0xe000008e
-	str	r1, [r0, #0x1C]		@DMC_PHYCONTROL1
-	ldr	r1, =0xe0000086
-	str	r1, [r0, #0x1C]		@DMC_PHYCONTROL1
-
-	ldr	r1, =0x71101008
-	str	r1, [r0, #0x18]		@DMC_PHYCONTROL0
-	ldr	r1, =0x7110100A
-	str	r1, [r0, #0x18]		@DMC_PHYCONTROL0
-	ldr	r1, =0xe0000086
-	str	r1, [r0, #0x1C]		@DMC_PHYCONTROL1
-	ldr	r1, =0x7110100B
-	str	r1, [r0, #0x18]		@DMC_PHYCONTROL0
-
-	ldr	r1, =0x00000000
-	str	r1, [r0, #0x20]		@DMC_PHYCONTROL2
-
-	ldr	r1, =0x0FFF301a
-	str	r1, [r0, #0x00]		@DMC_CONCONTROL
-	ldr	r1, =0x00312640
-	str	r1, [r0, #0x04]		@DMC_MEMCONTROL]
-
-#ifdef CONFIG_MIU_LINEAR
-	ldr	r1, =0x40e01323
-	str	r1, [r0, #0x08]		@DMC_MEMCONFIG0
-	ldr	r1, =0x60e01323
-	str	r1, [r0, #0x0C]		@DMC_MEMCONFIG1
-#else	/* @MIU_1BIT_INTERLEAVED | MIU_2BIT_INTERLEAVED */
-	ldr	r1, =0x20e01323
-	str	r1, [r0, #0x08]		@DMC_MEMCONFIG0
-	ldr	r1, =0x40e01323
-	str	r1, [r0, #0x0C]		@DMC_MEMCONFIG1
-#endif
-
-	ldr	r1, =0xff000000
-	str	r1, [r0, #0x14]		@DMC_PRECHCONFIG
-
-	ldr	r1, =0x000000BC
-	str	r1, [r0, #0x30]		@DMC_TIMINGAREF
-
-#ifdef DRAM_CLK_330
-	ldr	r1, =0x3545548d
-	str	r1, [r0, #0x34]		@DMC_TIMINGROW
-	ldr	r1, =0x45430506
-	str	r1, [r0, #0x38]		@DMC_TIMINGDATA
-	ldr	r1, =0x4439033c
-	str	r1, [r0, #0x3C]		@DMC_TIMINGPOWER
-#endif
-#ifdef DRAM_CLK_400
-	ldr	r1, =0x4046654f
-	str	r1, [r0, #0x34]		@DMC_TIMINGROW
-	ldr	r1, =0x56500506
-	str	r1, [r0, #0x38]		@DMC_TIMINGDATA
-	ldr	r1, =0x5444033d
-	str	r1, [r0, #0x3C]		@DMC_TIMINGPOWER
-#endif
-
-	ldr	r1, =0x07000000
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-
-	mov	r2, #0x100000
-2:	subs	r2, r2, #1
-	bne	2b
-
-	ldr	r1, =0x00020000
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-	ldr	r1, =0x00030000
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-	ldr	r1, =0x00010002
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-	ldr	r1, =0x00000328
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-
-	mov	r2, #0x100000
-3:	subs	r2, r2, #1
-	bne	3b
-
-	ldr	r1, =0x0a000000
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-
-	mov	r2, #0x100000
-4:	subs	r2, r2, #1
-	bne	4b
-
-	ldr	r1, =0x07100000
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-
-	mov	r2, #0x100000
-5:	subs	r2, r2, #1
-	bne	5b
-
-	ldr	r1, =0x00120000
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-	ldr	r1, =0x00130000
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-	ldr	r1, =0x00110002
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-	ldr	r1, =0x00100328
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-
-	mov	r2, #0x100000
-6:	subs	r2, r2, #1
-	bne	6b
-
-	ldr	r1, =0x0a100000
-	str	r1, [r0, #0x10]		@DMC_DIRECTCMD
-
-	mov	r2, #0x100000
-7:	subs	r2, r2, #1
-	bne	7b
-
-	ldr	r1, =0xe000008e
-	str	r1, [r0, #0x1C]		@DMC_PHYCONTROL1
-	ldr	r1, =0xe0000086
-	str	r1, [r0, #0x1C]		@DMC_PHYCONTROL1
-
-	mov	r2, #0x100000
-8:	subs	r2, r2, #1
-	bne	8b
-
-	/* turn on DREX0, DREX1 */
-	ldr	r0, =0x10400000		@APB_DMC_0_BASE
-	ldr	r1, =0x0FFF303a
-	str	r1, [r0, #0x00]		@DMC_CONCONTROL
-
-	ldr	r0, =0x10410000		@APB_DMC_1_BASE
-	ldr	r1, =0x0FFF303a
-	str	r1, [r0, #0x00]		@DMC_CONCONTROL
-
-	mov	pc, lr
diff --git a/board/samsung/smdkv310/mmc_boot.c b/board/samsung/smdkv310/mmc_boot.c
deleted file mode 100644
index d3fc18d19f1..00000000000
--- a/board/samsung/smdkv310/mmc_boot.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include<common.h>
-#include<config.h>
-
-/*
-* Copy U-boot from mmc to RAM:
-* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
-* API (Data transfer from mmc to ram)
-*/
-void copy_uboot_to_ram(void)
-{
-	u32 (*copy_bl2)(u32, u32, u32) = (void *)COPY_BL2_FNPTR_ADDR;
-
-	copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
-}
-
-void board_init_f(unsigned long bootflag)
-{
-	__attribute__((noreturn)) void (*uboot)(void);
-	copy_uboot_to_ram();
-
-	/* Jump to U-Boot image */
-	uboot = (void *)CONFIG_SYS_TEXT_BASE;
-	(*uboot)();
-	/* Never returns Here */
-}
-
-/* Place Holders */
-void board_init_r(gd_t *id, ulong dest_addr)
-{
-	/*Function attribute is no-return*/
-	/*This Function never executes*/
-	while (1)
-		;
-}
-
-void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3)
-{
-}
diff --git a/board/samsung/smdkv310/smdkv310.c b/board/samsung/smdkv310/smdkv310.c
index 81ac8f6f4a6..015b920ee27 100644
--- a/board/samsung/smdkv310/smdkv310.c
+++ b/board/samsung/smdkv310/smdkv310.c
@@ -26,6 +26,8 @@
 #include <asm/arch/cpu.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/pinmux.h>
 #include <asm/arch/sromc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -137,3 +139,47 @@ int board_mmc_init(bd_t *bis)
 	return err;
 }
 #endif
+
+static int board_uart_init(void)
+{
+	int err;
+
+	err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
+	if (err) {
+		debug("UART0 not configured\n");
+		return err;
+	}
+
+	err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
+	if (err) {
+		debug("UART1 not configured\n");
+		return err;
+	}
+
+	err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
+	if (err) {
+		debug("UART2 not configured\n");
+		return err;
+	}
+
+	err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
+	if (err) {
+		debug("UART3 not configured\n");
+		return err;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+	int err;
+	err = board_uart_init();
+	if (err) {
+		debug("UART init failed\n");
+		return err;
+	}
+	return err;
+}
+#endif