Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'

26 files changed, 1092 insertions, 500 deletions

diff --git a/board/avionic-design/common/tamonten.c b/board/avionic-design/common/tamonten.c
index e6a932ec3c7..ea95e432867 100644
--- a/board/avionic-design/common/tamonten.c
+++ b/board/avionic-design/common/tamonten.c
@@ -33,13 +33,8 @@
 #include <asm/arch/tegra.h>
 #include <asm/arch-tegra/board.h>
 #include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/mmc.h>
 #include <asm/arch-tegra/sys_proto.h>
 #include <asm/arch-tegra/uart.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
-
 
 #ifdef CONFIG_BOARD_EARLY_INIT_F
 void gpio_early_init(void)
@@ -54,7 +49,7 @@ void gpio_early_init(void)
  * Routine: pin_mux_mmc
  * Description: setup the pin muxes/tristate values for the SDMMC(s)
  */
-static void pin_mux_mmc(void)
+void pin_mux_mmc(void)
 {
 	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT);
 	/* for write-protect GPIO PI6 */
@@ -62,16 +57,4 @@ static void pin_mux_mmc(void)
 	/* for CD GPIO PH2 */
 	pinmux_tristate_disable(PINGRP_ATD);
 }
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
-	/* Enable muxes, etc. for SDMMC controllers */
-	pin_mux_mmc();
-
-	/* init dev 0, SD slot, with 4-bit bus */
-	tegra_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
-
-	return 0;
-}
 #endif
diff --git a/board/avionic-design/dts/tegra20-medcom-wide.dts b/board/avionic-design/dts/tegra20-medcom-wide.dts
index e46afbeab38..a9a07f9bcd7 100644
--- a/board/avionic-design/dts/tegra20-medcom-wide.dts
+++ b/board/avionic-design/dts/tegra20-medcom-wide.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ ARCH_CPU_DTS
+#include "tegra20-tamonten.dtsi"
 
 / {
 	model = "Avionic Design Medcom-Wide";
@@ -8,6 +8,7 @@
 
 	aliases {
 		usb0 = "/usb@c5008000";
+		sdhci0 = "/sdhci@c8000600";
 	};
 
 	memory {
diff --git a/board/avionic-design/dts/tegra20-plutux.dts b/board/avionic-design/dts/tegra20-plutux.dts
index 3e6cce013e4..20016f29bb3 100644
--- a/board/avionic-design/dts/tegra20-plutux.dts
+++ b/board/avionic-design/dts/tegra20-plutux.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ ARCH_CPU_DTS
+#include "tegra20-tamonten.dtsi"
 
 / {
 	model = "Avionic Design Plutux";
@@ -8,6 +8,7 @@
 
 	aliases {
 		usb0 = "/usb@c5008000";
+		sdhci0 = "/sdhci@c8000600";
 	};
 
 	memory {
diff --git a/board/avionic-design/dts/tegra20-tamonten.dtsi b/board/avionic-design/dts/tegra20-tamonten.dtsi
new file mode 100644
index 00000000000..86c7bab1602
--- /dev/null
+++ b/board/avionic-design/dts/tegra20-tamonten.dtsi
@@ -0,0 +1,489 @@
+#include "tegra20.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten SOM";
+	compatible = "ad,tamonten", "nvidia,tegra20";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x {
+		hdmi {
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+		};
+	};
+
+	pinmux {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
+					"spia", "spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			dta {
+				nvidia,pins = "dta", "dtd";
+				nvidia,function = "sdio2";
+			};
+			dtb {
+				nvidia,pins = "dtb", "dtc", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "pwm";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dtb", "gma",
+					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"gpv", "i2cp", "pta", "rm", "slxa",
+					"slxk", "spia", "spib", "uac";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <0>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spid", "spif";
+				nvidia,pull = <1>;
+				nvidia,tristate = <1>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
+					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"slxc", "slxd", "spdi", "spdo", "spig",
+					"uda";
+				nvidia,pull = <0>;
+				nvidia,tristate = <1>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "dta", "dtd", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"sdc";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "owc", "sdb";
+				nvidia,tristate = <1>;
+			};
+			conf_irrx {
+				nvidia,pins = "irrx", "irtx", "sdd", "spic",
+					"spie", "spih", "uaa", "uab", "uad",
+					"uca", "ucb";
+				nvidia,pull = <2>;
+				nvidia,tristate = <1>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <2>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "pmc";
+				nvidia,tristate = <0>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <1>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux_i2cmux_pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+
+		state_i2cmux_idle: pinmux_i2cmux_idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+		status = "okay";
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <100000>;
+		status = "okay";
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <400000>;
+		status = "okay";
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <0 86 0x4>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				sm0 {
+					regulator-name = "vdd_sys_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "vdd_sys_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sys_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				ldo0 {
+					regulator-name = "vdd_ldo0,vddio_pex_clk";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					/*
+					 * According to the Tegra 2 Automotive
+					 * DataSheet, a typical value for this
+					 * would be 2.8V, but the PMIC only
+					 * supports 2.85V.
+					 */
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam";
+					/*
+					 * According to the Tegra 2 Automotive
+					 * DataSheet, a typical value for this
+					 * would be 2.8V, but the PMIC only
+					 * supports 2.85V.
+					 */
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+		};
+	};
+
+	pmc {
+		nvidia,invert-interrupt;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	sdhci@c8000600 {
+		cd-gpios = <&gpio 58 1>; /* gpio PH2 */
+		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+		bus-width = <4>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v0_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/board/avionic-design/dts/tegra20-tec.dts b/board/avionic-design/dts/tegra20-tec.dts
index bf3ff1d0097..1d7cf89eb64 100644
--- a/board/avionic-design/dts/tegra20-tec.dts
+++ b/board/avionic-design/dts/tegra20-tec.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ ARCH_CPU_DTS
+#include "tegra20-tamonten.dtsi"
 
 / {
 	model = "Avionic Design Tamonten Evaluation Carrier";
@@ -8,6 +8,7 @@
 
 	aliases {
 		usb0 = "/usb@c5008000";
+		sdhci0 = "/sdhci@c8000600";
 	};
 
 	memory {
diff --git a/board/compal/dts/tegra20-paz00.dts b/board/compal/dts/tegra20-paz00.dts
index 31b064d4187..780203cfb3a 100644
--- a/board/compal/dts/tegra20-paz00.dts
+++ b/board/compal/dts/tegra20-paz00.dts
@@ -1,13 +1,15 @@
 /dts-v1/;
 
-/include/ ARCH_CPU_DTS
+#include "tegra20.dtsi"
 
 / {
-        model = "Toshiba AC100 / Dynabook AZ";
-        compatible = "compal,paz00", "nvidia,tegra20";
+	model = "Toshiba AC100 / Dynabook AZ";
+	compatible = "compal,paz00", "nvidia,tegra20";
 
 	aliases {
 		usb0 = "/usb@c5008000";
+		sdhci0 = "/sdhci@c8000600";
+		sdhci1 = "/sdhci@c8000000";
 	};
 
 	memory {
@@ -53,6 +55,19 @@
 		status = "disabled";
 	};
 
+	sdhci@c8000000 {
+		status = "okay";
+		cd-gpios = <&gpio 173 1>; /* gpio PV5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 169 0>; /* gpio PV1 */
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
 	lcd_panel: panel {
 		/* PAZ00 has 1024x600 */
 		clock = <54030000>;
diff --git a/board/compal/paz00/paz00.c b/board/compal/paz00/paz00.c
index 1447f47605b..d6e5c3740e5 100644
--- a/board/compal/paz00/paz00.c
+++ b/board/compal/paz00/paz00.c
@@ -18,19 +18,14 @@
 #include <asm/io.h>
 #include <asm/arch/tegra.h>
 #include <asm/arch/pinmux.h>
-#include <asm/arch-tegra/mmc.h>
 #include <asm/gpio.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
-
 
 #ifdef CONFIG_TEGRA_MMC
 /*
  * Routine: pin_mux_mmc
  * Description: setup the pin muxes/tristate values for the SDMMC(s)
  */
-static void pin_mux_mmc(void)
+void pin_mux_mmc(void)
 {
 	/* SDMMC4: config 3, x8 on 2nd set of pins */
 	pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4);
@@ -51,25 +46,6 @@ static void pin_mux_mmc(void)
 	/* For CD GPIO PV5 */
 	pinmux_tristate_disable(PINGRP_GPV);
 }
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
-	debug("board_mmc_init called\n");
-
-	/* Enable muxes, etc. for SDMMC controllers */
-	pin_mux_mmc();
-
-	debug("board_mmc_init: init eMMC\n");
-	/* init dev 0, eMMC chip, with 8-bit bus */
-	tegra_mmc_init(0, 8, -1, -1);
-
-	debug("board_mmc_init: init SD slot\n");
-	/* init dev 3, SD slot, with 4-bit bus */
-	tegra_mmc_init(3, 4, GPIO_PV1, GPIO_PV5);
-
-	return 0;
-}
 #endif
 
 #ifdef CONFIG_LCD
diff --git a/board/compulab/dts/tegra20-trimslice.dts b/board/compulab/dts/tegra20-trimslice.dts
index 7aeed670db0..ee31476c1eb 100644
--- a/board/compulab/dts/tegra20-trimslice.dts
+++ b/board/compulab/dts/tegra20-trimslice.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ ARCH_CPU_DTS
+#include "tegra20.dtsi"
 
 / {
 	model = "Compulab TrimSlice board";
@@ -9,6 +9,8 @@
 	aliases {
 		usb0 = "/usb@c5008000";
 		usb1 = "/usb@c5000000";
+		sdhci0 = "/sdhci@c8000600";
+		sdhci1 = "/sdhci@c8000000";
 	};
 
 	memory {
@@ -47,4 +49,16 @@
 	usb@c5004000 {
 		status = "disabled";
 	};
+
+	sdhci@c8000000 {
+		status = "okay";
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		cd-gpios = <&gpio 121 1>; /* gpio PP1 */
+		wp-gpios = <&gpio 122 0>; /* gpio PP2 */
+		bus-width = <4>;
+	};
 };
diff --git a/board/compulab/trimslice/trimslice.c b/board/compulab/trimslice/trimslice.c
index 8f4dd09faa3..8401100b188 100644
--- a/board/compulab/trimslice/trimslice.c
+++ b/board/compulab/trimslice/trimslice.c
@@ -27,12 +27,8 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/funcmux.h>
 #include <asm/arch/pinmux.h>
-#include <asm/arch-tegra/mmc.h>
 #include <asm/gpio.h>
 #include <i2c.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
 
 void pin_mux_usb(void)
 {
@@ -52,7 +48,7 @@ void pin_mux_spi(void)
  * Routine: pin_mux_mmc
  * Description: setup the pin muxes/tristate values for the SDMMC(s)
  */
-static void pin_mux_mmc(void)
+void pin_mux_mmc(void)
 {
 	funcmux_select(PERIPH_ID_SDMMC1, FUNCMUX_SDMMC1_SDIO1_4BIT);
 	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_4_BIT);
@@ -60,20 +56,3 @@ static void pin_mux_mmc(void)
 	/* For CD GPIO PP1 */
 	pinmux_tristate_disable(PINGRP_DAP3);
 }
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
-	debug("board_mmc_init called\n");
-
-	/* Enable muxes, etc. for SDMMC controllers */
-	pin_mux_mmc();
-
-	/* init dev 0 (SDMMC4), (micro-SD slot) with 4-bit bus */
-	tegra_mmc_init(0, 4, -1, GPIO_PP1);
-
-	/* init dev 3 (SDMMC1), (SD slot) with 4-bit bus */
-	tegra_mmc_init(3, 4, -1, -1);
-
-	return 0;
-}
diff --git a/board/nvidia/cardhu/cardhu.c b/board/nvidia/cardhu/cardhu.c
index df4cb6b728b..3544b41cd02 100644
--- a/board/nvidia/cardhu/cardhu.c
+++ b/board/nvidia/cardhu/cardhu.c
@@ -1,5 +1,5 @@
 /*
- *  (C) Copyright 2010-2012
+ *  (C) Copyright 2010-2013
  *  NVIDIA Corporation <www.nvidia.com>
  *
  * See file CREDITS for list of people who contributed to this
@@ -23,7 +23,12 @@
 
 #include <common.h>
 #include <asm/arch/pinmux.h>
+#include <asm/arch/gp_padctrl.h>
 #include "pinmux-config-cardhu.h"
+#include <i2c.h>
+
+#define PMU_I2C_ADDRESS		0x2D
+#define MAX_I2C_RETRY		3
 
 /*
  * Routine: pinmux_init
@@ -36,4 +41,54 @@ void pinmux_init(void)
 
 	pinmux_config_table(unused_pins_lowpower,
 		ARRAY_SIZE(unused_pins_lowpower));
+
+	/* Initialize any non-default pad configs (APB_MISC_GP regs) */
+	padgrp_config_table(cardhu_padctrl, ARRAY_SIZE(cardhu_padctrl));
+}
+
+#if defined(CONFIG_TEGRA_MMC)
+/*
+ * Do I2C/PMU writes to bring up SD card bus power
+ *
+ */
+void board_sdmmc_voltage_init(void)
+{
+	uchar reg, data_buffer[1];
+	int i;
+
+	i2c_set_bus_num(0);	/* PMU is on bus 0 */
+
+	/* TPS659110: LDO5_REG = 3.3v, ACTIVE to SDMMC1 */
+	data_buffer[0] = 0x65;
+	reg = 0x32;
+
+	for (i = 0; i < MAX_I2C_RETRY; ++i) {
+		if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
+			udelay(100);
+	}
+
+	/* TPS659110: GPIO7_REG = PDEN, output a 1 to EN_3V3_SYS */
+	data_buffer[0] = 0x09;
+	reg = 0x67;
+
+	for (i = 0; i < MAX_I2C_RETRY; ++i) {
+		if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
+			udelay(100);
+	}
+}
+
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the MMC muxes, power rails, etc.
+ */
+void pin_mux_mmc(void)
+{
+	/*
+	 * NOTE: We don't do mmc-specific pin muxes here.
+	 * They were done globally in pinmux_init().
+	 */
+
+	/* Bring up the SDIO1 power rail */
+	board_sdmmc_voltage_init();
 }
+#endif	/* MMC */
diff --git a/board/nvidia/cardhu/cardhu.c.mmc b/board/nvidia/cardhu/cardhu.c.mmc
deleted file mode 100644
index 9e83b6fc006..00000000000
--- a/board/nvidia/cardhu/cardhu.c.mmc
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- *  (C) Copyright 2010-2012
- *  NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/pinmux.h>
-#include "pinmux-config-cardhu.h"
-
-#include <asm/arch/clock.h>
-#include <asm/arch/gp_padctrl.h>
-#include <asm/arch/pmu.h>
-#include <asm/arch/sdmmc.h>
-#include <asm/arch-tegra/mmc.h>
-#include <asm/arch-tegra/tegra_mmc.h>
-#include <mmc.h>
-#include <i2c.h>
-
-/*
- * Routine: pinmux_init
- * Description: Do individual peripheral pinmux configs
- */
-void pinmux_init(void)
-{
-	pinmux_config_table(tegra3_pinmux_common,
-		ARRAY_SIZE(tegra3_pinmux_common));
-
-	pinmux_config_table(unused_pins_lowpower,
-		ARRAY_SIZE(unused_pins_lowpower));
-}
-
-#if defined(CONFIG_MMC)
-/*
- * Routine: pin_mux_mmc
- * Description: setup the pin muxes/tristate values for the SDMMC(s)
- */
-static void pin_mux_mmc(void)
-{
-}
-
-/* Do I2C/PMU writes to bring up SD card bus power */
-static void board_sdmmc_voltage_init(void)
-{
-        uchar reg, data_buffer[1];
-        int i;
-
-        i2c_set_bus_num(0);             /* PMU is on bus 0 */
-
-        data_buffer[0] = 0x65;
-        reg = 0x32;
-
-        for (i = 0; i < MAX_I2C_RETRY; ++i) {
-                if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
-                        udelay(100);
-        }
-
-        data_buffer[0] = 0x09;
-        reg = 0x67;
-
-        for (i = 0; i < MAX_I2C_RETRY; ++i) {
-                if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
-                        udelay(100);
-        }
-}
-
-static void pad_init_mmc(struct tegra_mmc *reg)
-{
-        struct apb_misc_gp_ctlr *const gpc =
-                (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
-        struct sdmmc_ctlr *const sdmmc = (struct sdmmc_ctlr *)reg;
-        u32 val, offset = (unsigned int)reg;
-        u32 padcfg, padmask;
-
-        debug("%s: sdmmc address = %08x\n", __func__, (unsigned int)sdmmc);
-
-        /* Set the pad drive strength for SDMMC1 or 3 only */
-        if (offset != TEGRA_SDMMC1_BASE && offset != TEGRA_SDMMC3_BASE) {
-                debug("%s: settings are only valid for SDMMC1/SDMMC3!\n",
-                        __func__);
-                return;
-        }
-
-        /* Set pads as per T30 TRM, section 24.6.1.2 */
-        padcfg = (GP_SDIOCFG_DRVUP_SLWF | GP_SDIOCFG_DRVDN_SLWR | \
-                GP_SDIOCFG_DRVUP | GP_SDIOCFG_DRVDN);
-        padmask = 0x00000FFF;
-        if (offset == TEGRA_SDMMC1_BASE) {
-                val = readl(&gpc->sdio1cfg);
-                val &= padmask;
-                val |= padcfg;
-                writel(val, &gpc->sdio1cfg);
-        } else {                                /* SDMMC3 */
-                val = readl(&gpc->sdio3cfg);
-                val &= padmask;
-                val |= padcfg;
-                writel(val, &gpc->sdio3cfg);
-        }
-
-        val = readl(&sdmmc->sdmmc_sdmemcomp_pad_ctrl);
-        val &= 0xFFFFFFF0;
-        val |= MEMCOMP_PADCTRL_VREF;
-        writel(val, &sdmmc->sdmmc_sdmemcomp_pad_ctrl);
-
-        val = readl(&sdmmc->sdmmc_auto_cal_config);
-        val &= 0xFFFF0000;
-        val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET | AUTO_CAL_ENABLED;
-        writel(val, &sdmmc->sdmmc_auto_cal_config);
-}
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
-	debug("board_mmc_init called\n");
-
-	/* Turn on SD-card bus power */
-	board_sdmmc_voltage_init();
-
-	/* Set up the SDMMC pads as per the TRM */
-	pad_init_mmc((struct tegra_mmc *)TEGRA_SDMMC1_BASE);
-
-	/* Enable muxes, etc. for SDMMC controllers */
-	pin_mux_mmc();
-
-	/* init dev 0 (SDMMC4), ("HSMMC") with 8-bit bus */
-	tegra_mmc_init(0, 8, -1, -1);
-
-	/* init dev 1 (SDMMC0), ("SDIO") with 8-bit bus */
-	tegra_mmc_init(1, 8, -1, -1);
-
-	return 0;
-}
-#endif	/* MMC */
diff --git a/board/nvidia/cardhu/pinmux-config-cardhu.h b/board/nvidia/cardhu/pinmux-config-cardhu.h
index 8428bba783f..51d2b9425c9 100644
--- a/board/nvidia/cardhu/pinmux-config-cardhu.h
+++ b/board/nvidia/cardhu/pinmux-config-cardhu.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -53,6 +53,18 @@
 		.ioreset	= PMUX_PIN_IO_RESET_##_ioreset	\
 	}
 
+#define DEFAULT_PADCFG(_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
+	{							\
+		.padgrp		= PDRIVE_PINGROUP_##_padgrp,	\
+		.slwf		= _slwf,			\
+		.slwr		= _slwr,			\
+		.drvup		= _drvup,			\
+		.drvdn		= _drvdn,			\
+		.lpmd		= PGRP_LPMD_##_lpmd,		\
+		.schmt		= PGRP_SCHMT_##_schmt,		\
+		.hsm		= PGRP_HSM_##_hsm,		\
+	}
+
 static struct pingroup_config tegra3_pinmux_common[] = {
 	/* SDMMC1 pinmux */
 	DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT),
@@ -326,4 +338,9 @@ static struct pingroup_config unused_pins_lowpower[] = {
 	DEFAULT_PINMUX(GMI_DQS, NAND, NORMAL, TRISTATE, OUTPUT),
 };
 
-#endif /* _PINMUX_CONFIG_CARDHU_H_ */
+static struct padctrl_config cardhu_padctrl[] = {
+	/* (_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) */
+	DEFAULT_PADCFG(SDIO1, SDIOCFG_DRVUP_SLWF, SDIOCFG_DRVDN_SLWR, \
+		SDIOCFG_DRVUP, SDIOCFG_DRVDN, NONE, DISABLE, DISABLE),
+};
+#endif	/* _PINMUX_CONFIG_CARDHU_H_ */
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index d1d8a29cbaa..7d9f361a8ab 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -46,7 +46,11 @@
 #include <asm/arch/emc.h>
 #endif
 #ifdef CONFIG_USB_EHCI_TEGRA
-#include <asm/arch/usb.h>
+#include <asm/arch-tegra/usb.h>
+#endif
+#ifdef CONFIG_TEGRA_MMC
+#include <asm/arch-tegra/tegra_mmc.h>
+#include <asm/arch-tegra/mmc.h>
 #endif
 #include <i2c.h>
 #include <spi.h>
@@ -221,3 +225,53 @@ int board_late_init(void)
 #endif
 	return 0;
 }
+
+#if defined(CONFIG_TEGRA_MMC)
+void __pin_mux_mmc(void)
+{
+}
+
+void pin_mux_mmc(void) __attribute__((weak, alias("__pin_mux_mmc")));
+
+/* this is a weak define that we are overriding */
+int board_mmc_init(bd_t *bd)
+{
+	debug("%s called\n", __func__);
+
+	/* Enable muxes, etc. for SDMMC controllers */
+	pin_mux_mmc();
+
+	debug("%s: init MMC\n", __func__);
+	tegra_mmc_init();
+
+	return 0;
+}
+
+void pad_init_mmc(struct mmc_host *host)
+{
+#if defined(CONFIG_TEGRA30)
+	enum periph_id id = host->mmc_id;
+	u32 val;
+
+	debug("%s: sdmmc address = %08x, id = %d\n", __func__,
+		(unsigned int)host->reg, id);
+
+	/* Set the pad drive strength for SDMMC1 or 3 only */
+	if (id != PERIPH_ID_SDMMC1 && id != PERIPH_ID_SDMMC3) {
+		debug("%s: settings are only valid for SDMMC1/SDMMC3!\n",
+			__func__);
+		return;
+	}
+
+	val = readl(&host->reg->sdmemcmppadctl);
+	val &= 0xFFFFFFF0;
+	val |= MEMCOMP_PADCTRL_VREF;
+	writel(val, &host->reg->sdmemcmppadctl);
+
+	val = readl(&host->reg->autocalcfg);
+	val &= 0xFFFF0000;
+	val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET | AUTO_CAL_ENABLED;
+	writel(val, &host->reg->autocalcfg);
+#endif	/* T30 */
+}
+#endif	/* MMC */
diff --git a/board/nvidia/dalmore/dalmore.c b/board/nvidia/dalmore/dalmore.c
index aca3c7d17bb..2020a5f00d2 100644
--- a/board/nvidia/dalmore/dalmore.c
+++ b/board/nvidia/dalmore/dalmore.c
@@ -24,6 +24,9 @@
  */
 void pinmux_init(void)
 {
+	pinmux_config_table(tegra114_pinmux_set_nontristate,
+		ARRAY_SIZE(tegra114_pinmux_set_nontristate));
+
 	pinmux_config_table(tegra114_pinmux_common,
 		ARRAY_SIZE(tegra114_pinmux_common));
 
diff --git a/board/nvidia/dalmore/pinmux-config-dalmore.h b/board/nvidia/dalmore/pinmux-config-dalmore.h
index 3dd47da32db..3ef6f4eaf6f 100644
--- a/board/nvidia/dalmore/pinmux-config-dalmore.h
+++ b/board/nvidia/dalmore/pinmux-config-dalmore.h
@@ -17,7 +17,7 @@
 #ifndef _PINMUX_CONFIG_DALMORE_H_
 #define _PINMUX_CONFIG_DALMORE_H_
 
-#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io)   \
+#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io)	\
 	{							\
 		.pingroup	= PINGRP_##_pingroup,		\
 		.func		= PMUX_FUNC_##_mux,		\
@@ -41,7 +41,19 @@
 		.ioreset	= PMUX_PIN_IO_RESET_DEFAULT,	\
 	}
 
-#define LV_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \
+#define DDC_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _rcv_sel) \
+	{							\
+		.pingroup	= PINGRP_##_pingroup,		\
+		.func		= PMUX_FUNC_##_mux,		\
+		.pull		= PMUX_PULL_##_pull,		\
+		.tristate	= PMUX_TRI_##_tri,		\
+		.io		= PMUX_PIN_##_io,		\
+		.lock		= PMUX_PIN_LOCK_##_lock,	\
+		.rcv_sel	= PMUX_PIN_RCV_SEL_##_rcv_sel,	\
+		.ioreset	= PMUX_PIN_IO_RESET_DEFAULT,	\
+	}
+
+#define VI_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \
 	{							\
 		.pingroup	= PINGRP_##_pingroup,		\
 		.func		= PMUX_FUNC_##_mux,		\
@@ -50,200 +62,303 @@
 		.io		= PMUX_PIN_##_io,		\
 		.lock		= PMUX_PIN_LOCK_##_lock,	\
 		.od		= PMUX_PIN_OD_DEFAULT,		\
-		.ioreset	= PMUX_PIN_IO_RESET_##_ioreset  \
+		.ioreset	= PMUX_PIN_IO_RESET_##_ioreset	\
+	}
+
+#define CEC_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od)	\
+	{								\
+		.pingroup   = PINGRP_##_pingroup,			\
+		.func       = PMUX_FUNC_##_mux,				\
+		.pull       = PMUX_PULL_##_pull,			\
+		.tristate   = PMUX_TRI_##_tri,				\
+		.io         = PMUX_PIN_##_io,				\
+		.lock       = PMUX_PIN_LOCK_##_lock,			\
+		.od         = PMUX_PIN_OD_##_od,			\
+		.ioreset    = PMUX_PIN_IO_RESET_DEFAULT,		\
+	}
+
+#define USB_PINMUX CEC_PINMUX
+
+#define DEFAULT_PADCFG(_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
+	{						\
+		.padgrp = PDRIVE_PINGROUP_##_padgrp,	\
+		.slwf   = _slwf,			\
+		.slwr   = _slwr,			\
+		.drvup  = _drvup,			\
+		.drvdn  = _drvdn,			\
+		.lpmd   = PGRP_LPMD_##_lpmd,		\
+		.schmt  = PGRP_SCHMT_##_schmt,		\
+		.hsm    = PGRP_HSM_##_hsm,		\
 	}
 
 static struct pingroup_config tegra114_pinmux_common[] = {
+	/* EXTPERIPH1 pinmux */
+	DEFAULT_PINMUX(CLK1_OUT,      EXTPERIPH1,  NORMAL,    NORMAL,   OUTPUT),
+
+	/* I2S0 pinmux */
+	DEFAULT_PINMUX(DAP1_DIN,      I2S0,        NORMAL,    TRISTATE, INPUT),
+	DEFAULT_PINMUX(DAP1_DOUT,     I2S0,        NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(DAP1_FS,       I2S0,        NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(DAP1_SCLK,     I2S0,        NORMAL,    NORMAL,   INPUT),
+
+	/* I2S1 pinmux */
+	DEFAULT_PINMUX(DAP2_DIN,      I2S1,        NORMAL,    TRISTATE, INPUT),
+	DEFAULT_PINMUX(DAP2_DOUT,     I2S1,        NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(DAP2_FS,       I2S1,        NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(DAP2_SCLK,     I2S1,        NORMAL,    NORMAL,   INPUT),
+
+	/* I2S3 pinmux */
+	DEFAULT_PINMUX(DAP4_DIN,      I2S3,        NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(DAP4_DOUT,     I2S3,        NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(DAP4_FS,       I2S3,        NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(DAP4_SCLK,     I2S3,        NORMAL,    NORMAL,   INPUT),
+
+	/* CLDVFS pinmux */
+	DEFAULT_PINMUX(DVFS_PWM,      CLDVFS,      NORMAL,    NORMAL,   OUTPUT),
+	DEFAULT_PINMUX(DVFS_CLK,      CLDVFS,      NORMAL,    NORMAL,   OUTPUT),
+
+	/* ULPI pinmux */
+	DEFAULT_PINMUX(ULPI_CLK,      ULPI,        NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(ULPI_DATA0,    ULPI,        NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(ULPI_DATA1,    ULPI,        NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(ULPI_DATA2,    ULPI,        NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(ULPI_DATA3,    ULPI,        NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(ULPI_DATA4,    ULPI,        NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(ULPI_DATA5,    ULPI,        NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(ULPI_DATA6,    ULPI,        NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(ULPI_DATA7,    ULPI,        NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(ULPI_DIR,      ULPI,        NORMAL,    TRISTATE, INPUT),
+	DEFAULT_PINMUX(ULPI_NXT,      ULPI,        NORMAL,    TRISTATE, INPUT),
+	DEFAULT_PINMUX(ULPI_STP,      ULPI,        NORMAL,    NORMAL,   OUTPUT),
+
+	/* I2C3 pinmux */
+	I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+	I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+
+	/* VI pinmux */
+	VI_PINMUX(CAM_MCLK, VI_ALT3,  NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+
+	/* VI_ALT1 pinmux */
+	VI_PINMUX(GPIO_PBB0, VI_ALT3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+
+	/* VGP4 pinmux */
+	VI_PINMUX(GPIO_PBB4, VGP4,    NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+
+	/* I2C2 pinmux */
+	I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+	I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+
+	/* UARTD pinmux */
+	DEFAULT_PINMUX(GMI_A16,       UARTD,       NORMAL,    NORMAL,   OUTPUT),
+	DEFAULT_PINMUX(GMI_A17,       UARTD,       NORMAL,    TRISTATE, INPUT),
+	DEFAULT_PINMUX(GMI_A18,       UARTD,       NORMAL,    TRISTATE, INPUT),
+	DEFAULT_PINMUX(GMI_A19,       UARTD,       NORMAL,    NORMAL,   OUTPUT),
+
+	/* SPI4 pinmux */
+	DEFAULT_PINMUX(GMI_AD5,       SPI4,        NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(GMI_AD6,       SPI4,        UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(GMI_AD7,       SPI4,        UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(GMI_AD12,      RSVD1,       NORMAL,    NORMAL,   OUTPUT),
+	DEFAULT_PINMUX(GMI_CS6_N,     SPI4,        NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(GMI_WR_N,      SPI4,        NORMAL,    NORMAL,   INPUT),
+
+	/* PWM1 pinmux */
+	DEFAULT_PINMUX(GMI_AD9,       PWM1,        NORMAL,    NORMAL,   OUTPUT),
+
+	/* SOC pinmux */
+	DEFAULT_PINMUX(GMI_CS1_N,     SOC,         NORMAL,    TRISTATE, INPUT),
+	DEFAULT_PINMUX(GMI_OE_N,      SOC,         NORMAL,    TRISTATE, INPUT),
+
+	/* EXTPERIPH2 pinmux */
+	DEFAULT_PINMUX(CLK2_OUT,      EXTPERIPH2,  NORMAL,    NORMAL,   OUTPUT),
+
 	/* SDMMC1 pinmux */
-	DEFAULT_PINMUX(SDMMC1_CLK,      SDMMC1,	  NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(SDMMC1_CMD,      SDMMC1,	  UP,     NORMAL,   INPUT),
-	DEFAULT_PINMUX(SDMMC1_DAT3,     SDMMC1,	  UP,     NORMAL,   INPUT),
-	DEFAULT_PINMUX(SDMMC1_DAT2,     SDMMC1,	  UP,     NORMAL,   INPUT),
-	DEFAULT_PINMUX(SDMMC1_DAT1,     SDMMC1,	  UP,     NORMAL,   INPUT),
-	DEFAULT_PINMUX(SDMMC1_DAT0,     SDMMC1,	  UP,     NORMAL,   INPUT),
-	DEFAULT_PINMUX(SDMMC1_WP_N,     SDMMC1,	  UP,     NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC1_CLK,    SDMMC1,      NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC1_CMD,    SDMMC1,      UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC1_DAT0,   SDMMC1,      UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC1_DAT1,   SDMMC1,      UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC1_DAT2,   SDMMC1,      UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC1_DAT3,   SDMMC1,      UP,        NORMAL,   INPUT),
 
 	/* SDMMC3 pinmux */
-	DEFAULT_PINMUX(SDMMC3_CLK,      SDMMC3,	  NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(SDMMC3_CLK_LB_IN, SDMMC3,  NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(SDMMC3_CLK_LB_OUT, SDMMC3, NORMAL, NORMAL,   OUTPUT),
-
-	DEFAULT_PINMUX(SDMMC3_CMD,      SDMMC3,	  UP,     NORMAL,   INPUT),
-	DEFAULT_PINMUX(SDMMC3_DAT0,     SDMMC3,	  UP,     NORMAL,   INPUT),
-	DEFAULT_PINMUX(SDMMC3_DAT1,     SDMMC3,	  UP,     NORMAL,   INPUT),
-	DEFAULT_PINMUX(SDMMC3_DAT2,     SDMMC3,	  UP,     NORMAL,   INPUT),
-	DEFAULT_PINMUX(SDMMC3_DAT3,     SDMMC3,	  UP,     NORMAL,   INPUT),
-	DEFAULT_PINMUX(SDMMC3_CD_N,     SDMMC3,   UP,     NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC3_CLK,    SDMMC3,      NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC3_CMD,    SDMMC3,      UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT0,   SDMMC3,      UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT1,   SDMMC3,      UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT2,   SDMMC3,      UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT3,   SDMMC3,      UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC3_CLK_LB_IN,  SDMMC3,  UP,        TRISTATE, INPUT),
+	DEFAULT_PINMUX(SDMMC3_CLK_LB_OUT, SDMMC3,  DOWN,      NORMAL,   INPUT),
 
 	/* SDMMC4 pinmux */
-	LV_PINMUX(SDMMC4_CLK,  SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
-	LV_PINMUX(SDMMC4_CMD,  SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
-	LV_PINMUX(SDMMC4_DAT0, SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
-	LV_PINMUX(SDMMC4_DAT1, SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
-	LV_PINMUX(SDMMC4_DAT2, SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
-	LV_PINMUX(SDMMC4_DAT3, SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
-	LV_PINMUX(SDMMC4_DAT4, SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
-	LV_PINMUX(SDMMC4_DAT5, SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
-	LV_PINMUX(SDMMC4_DAT6, SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
-	LV_PINMUX(SDMMC4_DAT7, SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
-	LV_PINMUX(SDMMC4_RST_N,	RSVD1, DOWN,   NORMAL, INPUT, DISABLE, DISABLE),
+	DEFAULT_PINMUX(SDMMC4_CLK,    SDMMC4,      NORMAL,    NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC4_CMD,    SDMMC4,      UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC4_DAT0,   SDMMC4,      UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC4_DAT1,   SDMMC4,      UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC4_DAT2,   SDMMC4,      UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC4_DAT3,   SDMMC4,      UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC4_DAT4,   SDMMC4,      UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC4_DAT5,   SDMMC4,      UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC4_DAT6,   SDMMC4,      UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC4_DAT7,   SDMMC4,      UP,        NORMAL,   INPUT),
+
+	/* BLINK pinmux */
+	DEFAULT_PINMUX(CLK_32K_OUT,   BLINK,       NORMAL,    NORMAL,   OUTPUT),
+
+	/* KBC pinmux */
+	DEFAULT_PINMUX(KB_COL0,       KBC,         UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(KB_COL1,       KBC,         UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(KB_COL2,       KBC,         UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(KB_ROW0,       KBC,         UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(KB_ROW1,       KBC,         UP,        NORMAL,   INPUT),
+	DEFAULT_PINMUX(KB_ROW2,       KBC,         UP,        NORMAL,   INPUT),
+
+	/*Audio Codec*/
+	DEFAULT_PINMUX(DAP3_DIN,      RSVD1,       NORMAL,    TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(DAP3_SCLK,     RSVD1,       NORMAL,    TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GPIO_PV0,      RSVD1,       NORMAL,    TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(KB_ROW7,       RSVD1,       UP,        NORMAL,   INPUT),
+
+	/* UARTA pinmux */
+	DEFAULT_PINMUX(KB_ROW10,      UARTA,       NORMAL,    TRISTATE, INPUT),
+	DEFAULT_PINMUX(KB_ROW9,       UARTA,       NORMAL,    NORMAL,   OUTPUT),
+
+	/* I2CPWR pinmux (I2C5) */
+	I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+	I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+
+	/* SYSCLK pinmux */
+	DEFAULT_PINMUX(SYS_CLK_REQ,   SYSCLK,      NORMAL,    NORMAL,   OUTPUT),
+
+	/* RTCK pinmux */
+	DEFAULT_PINMUX(JTAG_RTCK,     RTCK,        NORMAL,    NORMAL,   INPUT),
+
+	/* CLK pinmux */
+	DEFAULT_PINMUX(CLK_32K_IN,    CLK,         NORMAL,    TRISTATE, INPUT),
+
+	/* PWRON pinmux */
+	DEFAULT_PINMUX(CORE_PWR_REQ,  PWRON,       NORMAL,    NORMAL,   OUTPUT),
+
+	/* CPU pinmux */
+	DEFAULT_PINMUX(CPU_PWR_REQ,   CPU,         NORMAL,    NORMAL,   OUTPUT),
+
+	/* PMI pinmux */
+	DEFAULT_PINMUX(PWR_INT_N,     PMI,         NORMAL,    TRISTATE, INPUT),
+
+	/* RESET_OUT_N pinmux */
+	DEFAULT_PINMUX(RESET_OUT_N,   RESET_OUT_N, NORMAL,    NORMAL,   OUTPUT),
+
+	/* EXTPERIPH3 pinmux */
+	DEFAULT_PINMUX(CLK3_OUT,      EXTPERIPH3,  NORMAL,    NORMAL,   OUTPUT),
 
 	/* I2C1 pinmux */
-	I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL,	NORMAL,	INPUT, DISABLE, ENABLE),
-	I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL,	NORMAL,	INPUT, DISABLE, ENABLE),
+	I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+	I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
 
-	/* I2C2 pinmux */
-	I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL,	NORMAL,	INPUT, DISABLE, ENABLE),
-	I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL,	NORMAL,	INPUT, DISABLE, ENABLE),
+	/* UARTB pinmux */
+	DEFAULT_PINMUX(UART2_CTS_N,   UARTB,       NORMAL,    TRISTATE, INPUT),
+	DEFAULT_PINMUX(UART2_RTS_N,   UARTB,       NORMAL,    NORMAL,   OUTPUT),
 
-	/* I2C3 pinmux */
-	I2C_PINMUX(CAM_I2C_SCL,	I2C3, NORMAL,	NORMAL,	INPUT, DISABLE, ENABLE),
-	I2C_PINMUX(CAM_I2C_SDA,	I2C3, NORMAL,	NORMAL,	INPUT, DISABLE, ENABLE),
+	/* IRDA pinmux */
+	DEFAULT_PINMUX(UART2_RXD,     UARTB,       NORMAL,    TRISTATE, INPUT),
+	DEFAULT_PINMUX(UART2_TXD,     UARTB,       NORMAL,    NORMAL,   OUTPUT),
+
+	/* UARTC pinmux */
+	DEFAULT_PINMUX(UART3_CTS_N,   UARTC,       NORMAL,    TRISTATE, INPUT),
+	DEFAULT_PINMUX(UART3_RTS_N,   UARTC,       NORMAL,    NORMAL,   OUTPUT),
+	DEFAULT_PINMUX(UART3_RXD,     UARTC,       NORMAL,    TRISTATE, INPUT),
+	DEFAULT_PINMUX(UART3_TXD,     UARTC,       NORMAL,    NORMAL,   OUTPUT),
+
+	/* OWR pinmux */
+	DEFAULT_PINMUX(OWR,           OWR,         NORMAL,    NORMAL,   INPUT),
+
+	/* CEC pinmux */
+	CEC_PINMUX(HDMI_CEC, CEC, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
 
 	/* I2C4 pinmux */
-	I2C_PINMUX(DDC_SCL,	I2C4, NORMAL,	NORMAL,	INPUT, DISABLE, ENABLE),
-	I2C_PINMUX(DDC_SDA,	I2C4, NORMAL,	NORMAL,	INPUT, DISABLE, ENABLE),
-
-	/* Power I2C pinmux */
-	I2C_PINMUX(PWR_I2C_SCL,	I2CPWR,	NORMAL,	NORMAL,	INPUT, DISABLE, ENABLE),
-	I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
-
-	DEFAULT_PINMUX(ULPI_DATA0,      UARTA,    NORMAL, NORMAL,   OUTPUT),
-	DEFAULT_PINMUX(ULPI_DATA1,      UARTA,    UP,     NORMAL,   INPUT),
-	DEFAULT_PINMUX(ULPI_DATA2,      UARTA,    NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(ULPI_DATA3,      UARTA,    NORMAL, NORMAL,   INPUT),
-
-	DEFAULT_PINMUX(ULPI_DATA4,      UARTA,    NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(ULPI_DATA5,      UARTA,	  NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(ULPI_DATA6,      UARTA,	  NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(ULPI_DATA7,      UARTA,	  NORMAL, NORMAL,     OUTPUT),
-	DEFAULT_PINMUX(ULPI_CLK,	UARTD,    NORMAL, NORMAL,     OUTPUT),
-	DEFAULT_PINMUX(ULPI_DIR,	UARTD,    NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(ULPI_NXT,	UARTD,    NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(ULPI_STP,	UARTD,    NORMAL, NORMAL,     OUTPUT),
-	DEFAULT_PINMUX(DAP3_FS,	        I2S2,     NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(DAP3_DIN,	I2S2,     NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(DAP3_DOUT,       I2S2,	  NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(DAP3_SCLK,       I2S2,	  NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(CLK2_OUT,	EXTPERIPH2, NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(CLK2_REQ,	DAP,      NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(UART2_RXD,       UARTB,	  NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(UART2_TXD,       UARTB,	  NORMAL, NORMAL,     OUTPUT),
-	DEFAULT_PINMUX(UART2_RTS_N,     UARTB,	  NORMAL, NORMAL,     OUTPUT),
-	DEFAULT_PINMUX(UART2_CTS_N,     UARTB,	  NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(UART3_TXD,       UARTC,	  NORMAL, NORMAL,     OUTPUT),
-	DEFAULT_PINMUX(UART3_RXD,       UARTC,	  NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(UART3_CTS_N,     UARTC,	  NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(UART3_RTS_N,     UARTC,	  NORMAL, NORMAL,     OUTPUT),
-	DEFAULT_PINMUX(GPIO_PU0,	RSVD1,    NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(GPIO_PU1,	RSVD1,    NORMAL, NORMAL,     OUTPUT),
-	DEFAULT_PINMUX(GPIO_PU2,	RSVD1,    NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(GPIO_PU3,	RSVD1,    NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(GPIO_PU4,	PWM1,     NORMAL, NORMAL,     OUTPUT),
-	DEFAULT_PINMUX(GPIO_PU5,	PWM2,     NORMAL, NORMAL,     OUTPUT),
-	DEFAULT_PINMUX(GPIO_PU6,	RSVD1,    NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(DAP4_FS,         I2S3,     NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(DAP4_DIN,	I2S3,     NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(DAP4_DOUT,       I2S3,	  NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(DAP4_SCLK,       I2S3,	  NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(CLK3_OUT,	EXTPERIPH3, NORMAL, NORMAL,   OUTPUT),
-	DEFAULT_PINMUX(CLK3_REQ,	DEV3,     NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(GMI_WP_N,	GMI,      NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(GMI_CS2_N,       RSVD1,	  UP,     NORMAL,     INPUT),
-	DEFAULT_PINMUX(GMI_AD8,	        PWM0,     NORMAL, NORMAL,     OUTPUT),
-	DEFAULT_PINMUX(GMI_AD10,	NAND,     NORMAL, NORMAL,     OUTPUT),
-	DEFAULT_PINMUX(GMI_A16,	        UARTD,    NORMAL, NORMAL,     OUTPUT),
-	DEFAULT_PINMUX(GMI_A17,	        UARTD,    NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(GMI_A18,	        UARTD,    NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(GMI_A19,	        UARTD,    NORMAL, NORMAL,     OUTPUT),
-	DEFAULT_PINMUX(CAM_MCLK,	VI_ALT2,  UP,     NORMAL,     INPUT),
-	DEFAULT_PINMUX(GPIO_PCC1,       RSVD1,	  NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(GPIO_PBB0,       RSVD1,	  NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(GPIO_PBB3,       VGP3,	  NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(GPIO_PBB5,       VGP5,	  NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(GPIO_PBB6,       VGP6,	  NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(GPIO_PBB7,       I2S4,	  NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(GPIO_PCC2,       I2S4,	  NORMAL, NORMAL,     INPUT),
-	DEFAULT_PINMUX(JTAG_RTCK,       RTCK,	  NORMAL, NORMAL,     OUTPUT),
-
-	/*  KBC keys */
-	DEFAULT_PINMUX(KB_ROW0,    KBC,    UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(KB_ROW1,    KBC,    UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(KB_ROW2,    KBC,    UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(KB_ROW3,    KBC,    UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(KB_ROW4,    KBC,    UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(KB_ROW5,    KBC,    UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(KB_ROW6,    KBC,    UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(KB_ROW7,    KBC,    UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(KB_ROW8,    KBC,    UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(KB_ROW9,    KBC,    UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(KB_ROW10,   KBC,    UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(KB_COL0,    KBC,    UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(KB_COL1,    KBC,    UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(KB_COL2,    KBC,    UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(KB_COL3,    KBC,    UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(KB_COL4,    KBC,    UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(KB_COL5,    KBC,    UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(KB_COL6,    KBC,    UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(KB_COL7,    KBC,    UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(GPIO_PV0,   RSVD1,  UP,    NORMAL,    INPUT),
-	DEFAULT_PINMUX(GPIO_PV1,   RSVD1,  UP,    NORMAL,    INPUT),
-
-	DEFAULT_PINMUX(CLK_32K_OUT,     BLINK,	  NORMAL, NORMAL,   OUTPUT),
-	DEFAULT_PINMUX(SYS_CLK_REQ,     SYSCLK,	  NORMAL, NORMAL,   OUTPUT),
-	DEFAULT_PINMUX(OWR,	        OWR,	  NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(DAP1_FS,	        I2S0,     NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(DAP1_DIN,	I2S0,     NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(DAP1_DOUT,       I2S0,	  NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(DAP1_SCLK,       I2S0,	  NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(CLK1_REQ,	DAP,      NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(CLK1_OUT,	EXTPERIPH1, NORMAL, NORMAL, INPUT),
-	DEFAULT_PINMUX(SPDIF_IN,	SPDIF,    NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(SPDIF_OUT,       SPDIF,	  NORMAL, NORMAL,   OUTPUT),
-	DEFAULT_PINMUX(DAP2_FS,	        I2S1,     NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(DAP2_DIN,	I2S1,     NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(DAP2_DOUT,       I2S1,     NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(DAP2_SCLK,       I2S1,	  NORMAL, NORMAL,   INPUT),
-
-	DEFAULT_PINMUX(SPI1_MOSI,       SPI1,     NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(SPI1_SCK,	SPI1,     NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(SPI1_CS0_N,      SPI1,	  NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(SPI1_CS1_N,      SPI1,	  NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(SPI1_CS2_N,      SPI1,	  NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(SPI1_MISO,       SPI1,	  NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(HDMI_CEC,	CEC,      NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(HDMI_INT,        RSVD1,    NORMAL, TRISTATE, INPUT),
-
-	/* GPIOs */
-	/* SDMMC1 CD gpio */
-	DEFAULT_PINMUX(GMI_IORDY,       RSVD1,	  UP,     NORMAL,   INPUT),
-
-	/* Touch RESET */
-	DEFAULT_PINMUX(GMI_AD14,	NAND,     NORMAL, NORMAL,   OUTPUT),
-
-	/* Power rails GPIO */
-	DEFAULT_PINMUX(SPI2_SCK,	GMI,      NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(GPIO_PBB4,       VGP4,     NORMAL, NORMAL,   INPUT),
-	DEFAULT_PINMUX(KB_ROW8,	        KBC,      UP,     NORMAL,   INPUT),
+	DDC_PINMUX(DDC_SCL, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, HIGH),
+	DDC_PINMUX(DDC_SDA, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, HIGH),
+
+	/* USB pinmux */
+	USB_PINMUX(USB_VBUS_EN0, USB, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
+
+	/* nct */
+	DEFAULT_PINMUX(GPIO_X6_AUD,   SPI6,        UP,        TRISTATE, INPUT),
 };
 
 static struct pingroup_config unused_pins_lowpower[] = {
-	DEFAULT_PINMUX(GMI_CS0_N,       NAND,	  UP,     TRISTATE, OUTPUT),
-	DEFAULT_PINMUX(GMI_CS3_N,       NAND,	  UP,     TRISTATE, OUTPUT),
-	DEFAULT_PINMUX(GMI_CS4_N,       NAND,	  UP,     TRISTATE, OUTPUT),
-	DEFAULT_PINMUX(GMI_CS7_N,       NAND,	  UP,     NORMAL,   INPUT),
-	DEFAULT_PINMUX(GMI_AD0,	        NAND,     NORMAL, TRISTATE, INPUT),
-	DEFAULT_PINMUX(GMI_AD1,	        NAND,     NORMAL, TRISTATE, INPUT),
-	DEFAULT_PINMUX(GMI_AD2,	        NAND,     NORMAL, TRISTATE, INPUT),
-	DEFAULT_PINMUX(GMI_AD3,	        NAND,     NORMAL, TRISTATE, INPUT),
-	DEFAULT_PINMUX(GMI_AD4,	        NAND,     NORMAL, TRISTATE, INPUT),
-	DEFAULT_PINMUX(GMI_AD5,	        NAND,     NORMAL, TRISTATE, INPUT),
-	DEFAULT_PINMUX(GMI_AD6,	        NAND,     NORMAL, TRISTATE, INPUT),
-	DEFAULT_PINMUX(GMI_AD7,	        NAND,     NORMAL, TRISTATE, INPUT),
-	DEFAULT_PINMUX(GMI_AD9,	        PWM1,     NORMAL, TRISTATE, OUTPUT),
-	DEFAULT_PINMUX(GMI_AD11,	NAND,     NORMAL, TRISTATE, OUTPUT),
-	DEFAULT_PINMUX(GMI_AD13,	NAND,     UP,	  NORMAL,   INPUT),
-	DEFAULT_PINMUX(GMI_WR_N,	NAND,     NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(CLK1_REQ,      RSVD3,       DOWN, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(USB_VBUS_EN1,  RSVD3,       DOWN, TRISTATE, OUTPUT),
 };
 
-#endif /* _PINMUX_CONFIG_DALMORE_H_ */
+/* Initially setting all used GPIO's to non-TRISTATE */
+static struct pingroup_config tegra114_pinmux_set_nontristate[] = {
+	DEFAULT_PINMUX(GPIO_X4_AUD,     RSVD1,  DOWN,    NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(GPIO_X5_AUD,     RSVD1,  UP,      NORMAL,    INPUT),
+	DEFAULT_PINMUX(GPIO_X6_AUD,     RSVD3,  UP,      NORMAL,    INPUT),
+	DEFAULT_PINMUX(GPIO_X7_AUD,     RSVD1,  DOWN,    NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(GPIO_W2_AUD,     RSVD1,  UP,      NORMAL,    INPUT),
+	DEFAULT_PINMUX(GPIO_W3_AUD,     SPI6,   UP,      NORMAL,    INPUT),
+	DEFAULT_PINMUX(GPIO_X1_AUD,     RSVD3,  DOWN,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(GPIO_X3_AUD,     RSVD3,  UP,      NORMAL,    INPUT),
+
+	DEFAULT_PINMUX(DAP3_FS,         I2S2,   DOWN,    NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(DAP3_DIN,        I2S2,   DOWN,    NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(DAP3_DOUT,       I2S2,   DOWN,    NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(DAP3_SCLK,       I2S2,   DOWN,    NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(GPIO_PV0,        RSVD3,  NORMAL,  NORMAL,    INPUT),
+	DEFAULT_PINMUX(GPIO_PV1,        RSVD1,  NORMAL,  NORMAL,    INPUT),
+
+	DEFAULT_PINMUX(GPIO_PBB3,       RSVD3,  DOWN,    NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(GPIO_PBB5,       RSVD3,  DOWN,    NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(GPIO_PBB6,       RSVD3,  DOWN,    NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(GPIO_PBB7,       RSVD3,  DOWN,    NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(GPIO_PCC1,       RSVD3,  DOWN,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(GPIO_PCC2,       RSVD3,  DOWN,    NORMAL,    INPUT),
+
+	DEFAULT_PINMUX(GMI_AD0,         GMI,    NORMAL,  NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(GMI_AD1,         GMI,    NORMAL,  NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(GMI_AD10,        GMI,    DOWN,    NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(GMI_AD11,        GMI,    DOWN,    NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(GMI_AD12,        GMI,    UP,      NORMAL,    INPUT),
+	DEFAULT_PINMUX(GMI_AD13,        GMI,    DOWN,    NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(GMI_AD2,         GMI,    NORMAL,  NORMAL,    INPUT),
+	DEFAULT_PINMUX(GMI_AD3,         GMI,    NORMAL,  NORMAL,    INPUT),
+	DEFAULT_PINMUX(GMI_AD8,         GMI,    DOWN,    NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(GMI_ADV_N,       GMI,    UP,      NORMAL,    INPUT),
+	DEFAULT_PINMUX(GMI_CLK,         GMI,    DOWN,    NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(GMI_CS0_N,       GMI,    UP,      NORMAL,    INPUT),
+	DEFAULT_PINMUX(GMI_CS2_N,       GMI,    UP,      NORMAL,    INPUT),
+	DEFAULT_PINMUX(GMI_CS3_N,       GMI,    UP,      NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(GMI_CS4_N,       GMI,    UP,      NORMAL,    INPUT),
+	DEFAULT_PINMUX(GMI_CS7_N,       GMI,    UP,      NORMAL,    INPUT),
+	DEFAULT_PINMUX(GMI_DQS,         GMI,    UP,      NORMAL,    INPUT),
+	DEFAULT_PINMUX(GMI_IORDY,       GMI,    UP,      NORMAL,    INPUT),
+	DEFAULT_PINMUX(GMI_WP_N,        GMI,    UP,      NORMAL,    INPUT),
+
+	DEFAULT_PINMUX(SDMMC1_WP_N,     SPI4,   UP,      NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(CLK2_REQ,        RSVD3,  NORMAL,  NORMAL,    OUTPUT),
+
+	DEFAULT_PINMUX(KB_COL3,         KBC,    UP,      NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(KB_COL4,		SDMMC3, UP,	 NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_COL5,         KBC,    UP,      NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_COL6,         KBC,    UP,      NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(KB_COL7,         KBC,    UP,      NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(KB_ROW3,         KBC,    DOWN,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_ROW4,         KBC,    DOWN,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_ROW6,         KBC,    DOWN,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_ROW8,         KBC,    UP,      NORMAL,    INPUT),
+
+	DEFAULT_PINMUX(CLK3_REQ,        RSVD3,  NORMAL,  NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(GPIO_PU4,        RSVD3,  NORMAL,  NORMAL,    OUTPUT),
+	DEFAULT_PINMUX(GPIO_PU5,        RSVD3,  NORMAL,  NORMAL,    INPUT),
+	DEFAULT_PINMUX(GPIO_PU6,        RSVD3,  NORMAL,  NORMAL,    INPUT),
+
+	DEFAULT_PINMUX(HDMI_INT,        RSVD1,   DOWN,    NORMAL,   INPUT),
+
+	DEFAULT_PINMUX(GMI_AD9,         PWM1,   NORMAL,   NORMAL,   OUTPUT),
+	DEFAULT_PINMUX(SPDIF_IN,	USB,	NORMAL,   NORMAL,   INPUT),
+
+	DEFAULT_PINMUX(SDMMC3_CD_N,     SDMMC3, UP,       NORMAL,   INPUT),
+};
+#endif /* PINMUX_CONFIG_COMMON_H */
diff --git a/board/nvidia/dts/tegra114-dalmore.dts b/board/nvidia/dts/tegra114-dalmore.dts
index 731557798e7..30cf1fb7305 100644
--- a/board/nvidia/dts/tegra114-dalmore.dts
+++ b/board/nvidia/dts/tegra114-dalmore.dts
@@ -1,13 +1,46 @@
 /dts-v1/;
 
-/include/ ARCH_CPU_DTS
+#include "tegra114.dtsi"
 
 / {
 	model = "NVIDIA Dalmore";
 	compatible = "nvidia,dalmore", "nvidia,tegra114";
 
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000c700";
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x80000000>;
 	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
 };
diff --git a/board/nvidia/dts/tegra20-harmony.dts b/board/nvidia/dts/tegra20-harmony.dts
index aeda3a1ffbb..7934e4a897e 100644
--- a/board/nvidia/dts/tegra20-harmony.dts
+++ b/board/nvidia/dts/tegra20-harmony.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ ARCH_CPU_DTS
+#include "tegra20.dtsi"
 
 / {
 	model = "NVIDIA Tegra20 Harmony evaluation board";
@@ -9,6 +9,8 @@
 	aliases {
 		usb0 = "/usb@c5008000";
 		usb1 = "/usb@c5004000";
+		sdhci0 = "/sdhci@c8000600";
+		sdhci1 = "/sdhci@c8000200";
 	};
 
 	memory {
@@ -52,4 +54,20 @@
 	usb@c5004000 {
 		nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
 	};
+
+	sdhci@c8000200 {
+		status = "okay";
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		cd-gpios = <&gpio 58 1>; /* gpio PH2 */
+		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
+		bus-width = <8>;
+	};
 };
diff --git a/board/nvidia/dts/tegra20-seaboard.dts b/board/nvidia/dts/tegra20-seaboard.dts
index 527a29689da..c0e2e1e5fdb 100644
--- a/board/nvidia/dts/tegra20-seaboard.dts
+++ b/board/nvidia/dts/tegra20-seaboard.dts
@@ -1,7 +1,6 @@
 /dts-v1/;
 
-/memreserve/ 0x1c000000 0x04000000;
-/include/ ARCH_CPU_DTS
+#include "tegra20.dtsi"
 
 / {
 	model = "NVIDIA Seaboard";
@@ -12,14 +11,15 @@
 	};
 
 	aliases {
-		/* This defines the order of our USB ports */
+		/* This defines the order of our ports */
 		usb0 = "/usb@c5008000";
 		usb1 = "/usb@c5000000";
-
 		i2c0 = "/i2c@7000d000";
 		i2c1 = "/i2c@7000c000";
 		i2c2 = "/i2c@7000c400";
 		i2c3 = "/i2c@7000c500";
+		sdhci0 = "/sdhci@c8000600";
+		sdhci1 = "/sdhci@c8000400";
 	};
 
 	memory {
@@ -156,13 +156,16 @@
 	};
 
 	sdhci@c8000400 {
-		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		status = "okay";
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
 		power-gpios = <&gpio 70 0>; /* gpio PI6 */
+		bus-width = <4>;
 	};
 
 	sdhci@c8000600 {
-		support-8bit;
+		status = "okay";
+		bus-width = <8>;
 	};
 
 	lcd_panel: panel {
diff --git a/board/nvidia/dts/tegra20-ventana.dts b/board/nvidia/dts/tegra20-ventana.dts
index 3e5e39da632..e1a3d1ec91a 100644
--- a/board/nvidia/dts/tegra20-ventana.dts
+++ b/board/nvidia/dts/tegra20-ventana.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ ARCH_CPU_DTS
+#include "tegra20.dtsi"
 
 / {
 	model = "NVIDIA Tegra20 Ventana evaluation board";
@@ -8,6 +8,8 @@
 
 	aliases {
 		usb0 = "/usb@c5008000";
+		sdhci0 = "/sdhci@c8000600";
+		sdhci1 = "/sdhci@c8000400";
 	};
 
 	memory {
@@ -41,4 +43,17 @@
 	usb@c5004000 {
 		status = "disabled";
 	};
+
+	sdhci@c8000400 {
+		status = "okay";
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
 };
diff --git a/board/nvidia/dts/tegra20-whistler.dts b/board/nvidia/dts/tegra20-whistler.dts
index 4579557d6d1..eb92264f9d6 100644
--- a/board/nvidia/dts/tegra20-whistler.dts
+++ b/board/nvidia/dts/tegra20-whistler.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ ARCH_CPU_DTS
+#include "tegra20.dtsi"
 
 / {
 	model = "NVIDIA Tegra20 Whistler evaluation board";
@@ -9,6 +9,8 @@
 	aliases {
 		i2c0 = "/i2c@7000d000";
 		usb0 = "/usb@c5008000";
+		sdhci0 = "/sdhci@c8000600";
+		sdhci1 = "/sdhci@c8000400";
 	};
 
 	memory {
@@ -57,4 +59,15 @@
 	usb@c5004000 {
 		status = "disabled";
 	};
+
+	sdhci@c8000400 {
+		status = "okay";
+		wp-gpios = <&gpio 173 0>; /* gpio PV5 */
+		bus-width = <8>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
 };
diff --git a/board/nvidia/dts/tegra30-cardhu.dts b/board/nvidia/dts/tegra30-cardhu.dts
index f9f80c5218c..4d22b48ee91 100644
--- a/board/nvidia/dts/tegra30-cardhu.dts
+++ b/board/nvidia/dts/tegra30-cardhu.dts
@@ -1,7 +1,6 @@
 /dts-v1/;
 
-/memreserve/ 0x1c000000 0x04000000;
-/include/ ARCH_CPU_DTS
+#include "tegra30.dtsi"
 
 / {
 	model = "NVIDIA Cardhu";
@@ -13,6 +12,8 @@
 		i2c2 = "/i2c@7000c400";
 		i2c3 = "/i2c@7000c500";
 		i2c4 = "/i2c@7000c700";
+		sdhci0 = "/sdhci@78000600";
+		sdhci1 = "/sdhci@78000000";
 	};
 
 	memory {
@@ -21,22 +22,27 @@
 	};
 
 	i2c@7000c000 {
+		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	i2c@7000c400 {
+		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	i2c@7000c500 {
+		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	i2c@7000c700 {
+		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	i2c@7000d000 {
+		status = "okay";
 		clock-frequency = <100000>;
 	};
 
@@ -44,4 +50,17 @@
 		status = "okay";
 		spi-max-frequency = <25000000>;
 	};
+
+	sdhci@78000000 {
+		status = "okay";
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+		wp-gpios = <&gpio 155 0>; /* gpio PT3 */
+		power-gpios = <&gpio 31 0>; /* gpio PD7 */
+		bus-width = <4>;
+	};
+
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
 };
diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c
index 93430edd3bd..312244139c7 100644
--- a/board/nvidia/harmony/harmony.c
+++ b/board/nvidia/harmony/harmony.c
@@ -27,19 +27,14 @@
 #include <asm/arch/funcmux.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/tegra.h>
-#include <asm/arch-tegra/mmc.h>
 #include <asm/gpio.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
-
 
 #ifdef CONFIG_TEGRA_MMC
 /*
  * Routine: pin_mux_mmc
  * Description: setup the pin muxes/tristate values for the SDMMC(s)
  */
-static void pin_mux_mmc(void)
+void pin_mux_mmc(void)
 {
 	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT);
 	funcmux_select(PERIPH_ID_SDMMC2, FUNCMUX_SDMMC2_DTA_DTD_8BIT);
@@ -54,25 +49,6 @@ static void pin_mux_mmc(void)
 	/* For CD GPIO PI5 */
 	pinmux_tristate_disable(PINGRP_ATC);
 }
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
-	debug("board_mmc_init called\n");
-
-	/* Enable muxes, etc. for SDMMC controllers */
-	pin_mux_mmc();
-
-	debug("board_mmc_init: init SD slot J26\n");
-	/* init dev 0, SD slot J26, with 8-bit bus */
-	tegra_mmc_init(0, 8, GPIO_PI6, GPIO_PH2);
-
-	debug("board_mmc_init: init SD slot J5\n");
-	/* init dev 2, SD slot J5, with 4-bit bus */
-	tegra_mmc_init(2, 4, GPIO_PT3, GPIO_PI5);
-
-	return 0;
-}
 #endif
 
 void pin_mux_usb(void)
diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
index 3e33da0afc3..e581fddf434 100644
--- a/board/nvidia/seaboard/seaboard.c
+++ b/board/nvidia/seaboard/seaboard.c
@@ -28,11 +28,7 @@
 #include <asm/arch/funcmux.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/pinmux.h>
-#include <asm/arch-tegra/mmc.h>
 #include <asm/gpio.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
 
 /* TODO: Remove this code when the SPI switch is working */
 #if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
@@ -51,7 +47,7 @@ void gpio_early_init_uart(void)
  * Routine: pin_mux_mmc
  * Description: setup the pin muxes/tristate values for the SDMMC(s)
  */
-static void pin_mux_mmc(void)
+void pin_mux_mmc(void)
 {
 	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT);
 	funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_4BIT);
@@ -61,25 +57,6 @@ static void pin_mux_mmc(void)
 	/* For CD GPIO PI5 */
 	pinmux_tristate_disable(PINGRP_ATC);
 }
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
-	debug("board_mmc_init called\n");
-
-	/* Enable muxes, etc. for SDMMC controllers */
-	pin_mux_mmc();
-
-	debug("board_mmc_init: init eMMC\n");
-	/* init dev 0, eMMC chip, with 8-bit bus */
-	tegra_mmc_init(0, 8, -1, -1);
-
-	debug("board_mmc_init: init SD slot\n");
-	/* init dev 1, SD slot, with 4-bit bus */
-	tegra_mmc_init(1, 4, GPIO_PI6, GPIO_PI5);
-
-	return 0;
-}
 #endif
 
 void pin_mux_usb(void)
diff --git a/board/nvidia/whistler/whistler.c b/board/nvidia/whistler/whistler.c
index 592cd6b496d..f18aa277b3d 100644
--- a/board/nvidia/whistler/whistler.c
+++ b/board/nvidia/whistler/whistler.c
@@ -27,32 +27,19 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/funcmux.h>
 #include <asm/arch/pinmux.h>
-#include <asm/arch-tegra/mmc.h>
 #include <asm/gpio.h>
 #include <i2c.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
-
 
+#ifdef CONFIG_TEGRA_MMC
 /*
  * Routine: pin_mux_mmc
  * Description: setup the pin muxes/tristate values for the SDMMC(s)
  */
-static void pin_mux_mmc(void)
-{
-	funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_SLXA_8BIT);
-	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATC_ATD_8BIT);
-}
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
+void pin_mux_mmc(void)
 {
 	uchar val;
 	int ret;
 
-	debug("board_mmc_init called\n");
-
 	/* Turn on MAX8907B LDO12 to 2.8V for J40 power */
 	ret = i2c_set_bus_num(0);
 	if (ret)
@@ -70,17 +57,10 @@ int board_mmc_init(bd_t *bd)
 	if (ret)
 		printf("i2c_write 0 0x3c 0x44 failed: %d\n", ret);
 
-	/* Enable muxes, etc. for SDMMC controllers */
-	pin_mux_mmc();
-
-	/* init dev 0 (SDMMC4), (J29 "HSMMC") with 8-bit bus */
-	tegra_mmc_init(0, 8, -1, -1);
-
-	/* init dev 1 (SDMMC3), (J40 "SDIO3") with 8-bit bus */
-	tegra_mmc_init(1, 8, -1, -1);
-
-	return 0;
+	funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_SLXA_8BIT);
+	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATC_ATD_8BIT);
 }
+#endif
 
 /* this is a weak define that we are overriding */
 void pin_mux_usb(void)
diff --git a/board/toradex/colibri_t20_iris/colibri_t20_iris.c b/board/toradex/colibri_t20_iris/colibri_t20_iris.c
index e40a98609f4..aa76f65fdef 100644
--- a/board/toradex/colibri_t20_iris/colibri_t20_iris.c
+++ b/board/toradex/colibri_t20_iris/colibri_t20_iris.c
@@ -19,7 +19,6 @@
 #include <asm/arch/funcmux.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch-tegra/board.h>
-#include <asm/arch-tegra/mmc.h>
 
 #include "../colibri_t20-common/colibri_t20-common.h"
 
@@ -34,13 +33,13 @@ void pin_mux_usb(void)
 #endif
 
 #ifdef CONFIG_TEGRA_MMC
-int board_mmc_init(bd_t *bd)
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the pin muxes/tristate values for the SDMMC(s)
+ */
+void pin_mux_mmc(void)
 {
 	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_4_BIT);
 	pinmux_tristate_disable(PINGRP_GMB);
-
-	tegra_mmc_init(0, 4, -1, GPIO_PC7);
-
-	return 0;
 }
 #endif
diff --git a/board/toradex/dts/tegra20-colibri_t20_iris.dts b/board/toradex/dts/tegra20-colibri_t20_iris.dts
index c29b43a0efd..c0e54af8868 100644
--- a/board/toradex/dts/tegra20-colibri_t20_iris.dts
+++ b/board/toradex/dts/tegra20-colibri_t20_iris.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ ARCH_CPU_DTS
+#include "tegra20.dtsi"
 
 / {
 	model = "Toradex Colibri T20";
@@ -10,6 +10,7 @@
 		usb0 = "/usb@c5008000";
 		usb1 = "/usb@c5000000";
 		usb2 = "/usb@c5004000";
+		sdhci0 = "/sdhci@c8000600";
 	};
 
 	usb@c5000000 {
@@ -35,4 +36,10 @@
 			compatible = "nand-flash";
 		};
 	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		cd-gpios = <&gpio 23 1>; /* gpio PC7 */
+		bus-width = <4>;
+	};
 };