Merge branch 'master' of git://git.denx.de/u-boot-arm into master

Conflicts: arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg Signed-off-by: Stefano Babic <sbabic@denx.de>
author: Stefano Babic <sbabic@denx.de> 2014-04-04 11:35:30 +0200
committer: Stefano Babic <sbabic@denx.de> 2014-04-04 11:35:30 +0200
commit: 1cad23c5f471d695bed1e3907e30caee3c2a3056 (patch)
tree: 34e035df5db9b327aeae36eff9d0645a915e3177 /board
parent: 5dd73bc0a40a4b318195eab871a1f535aad6b43b (diff)
parent: 00b132bf34c5be86a108ac7fe8231ad9e97f6de4 (diff)
130 files changed, 2282 insertions, 2364 deletions
diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c
index 04f3f1f4b2..4c926ce700 100644
--- a/board/BuR/common/common.c
+++ b/board/BuR/common/common.c
@@ -141,12 +141,12 @@ static struct cpsw_slave_data cpsw_slaves[] = {
 	{
 		.slave_reg_ofs	= 0x208,
 		.sliver_reg_ofs	= 0xd80,
-		.phy_addr	= 0,
+		.phy_addr	= 1,
 	},
 	{
 		.slave_reg_ofs	= 0x308,
 		.sliver_reg_ofs	= 0xdc0,
-		.phy_addr	= 1,
+		.phy_addr	= 2,
 	},
 };
 
diff --git a/board/BuR/kwb/board.c b/board/BuR/kwb/board.c
index 8aa16bcf80..804765a8de 100644
--- a/board/BuR/kwb/board.c
+++ b/board/BuR/kwb/board.c
@@ -120,7 +120,7 @@ void am33xx_spl_board_init(void)
 
 	/* power-ON  3V3 via Resetcontroller */
 	oldspeed = i2c_get_bus_speed();
-	if (0 != i2c_set_bus_speed(CONFIG_SYS_OMAP24_I2C_SPEED_PSOC)) {
+	if (i2c_set_bus_speed(CONFIG_SYS_OMAP24_I2C_SPEED_PSOC) >= 0) {
 		buf = RSTCTRL_FORCE_PWR_NEN;
 		i2c_write(RSTCTRL_ADDR, RSTCTRL_CTRLREG, 1,
 			  (uint8_t *)&buf, sizeof(buf));
@@ -221,7 +221,7 @@ int board_late_init(void)
 			   TPS65217_WLEDCTRL1, 0x09, 0xFF);
 	/* write bootinfo into scratchregister of resetcontroller */
 	oldspeed = i2c_get_bus_speed();
-	if (0 != i2c_set_bus_speed(CONFIG_SYS_OMAP24_I2C_SPEED_PSOC)) {
+	if (i2c_set_bus_speed(CONFIG_SYS_OMAP24_I2C_SPEED_PSOC) >= 0) {
 		i2c_write(RSTCTRL_ADDR, RSTCTRL_SCRATCHREG, 1,
 			  (uint8_t *)&buf, sizeof(buf));
 		i2c_set_bus_speed(oldspeed);
diff --git a/board/BuS/vl_ma2sc/vl_ma2sc.c b/board/BuS/vl_ma2sc/vl_ma2sc.c
index 63f7ad9a7a..da39c86258 100644
--- a/board/BuS/vl_ma2sc/vl_ma2sc.c
+++ b/board/BuS/vl_ma2sc/vl_ma2sc.c
@@ -8,7 +8,7 @@
 
 #include <config.h>
 #include <common.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
 #include <asm/arch/hardware.h>
diff --git a/board/ait/cam_enc_4xx/config.mk b/board/ait/cam_enc_4xx/config.mk
index c7cfacacba..2022151309 100644
--- a/board/ait/cam_enc_4xx/config.mk
+++ b/board/ait/cam_enc_4xx/config.mk
@@ -7,7 +7,7 @@
 # (mem base + reserved)
 #
 
-UBL_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/ublimage.cfg
+UBL_CONFIG = $(srctree)/board/$(BOARDDIR)/ublimage.cfg
 ifndef CONFIG_SPL_BUILD
 ALL-y += u-boot.ubl
 else
diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c
index 61bfea3fab..9673118857 100644
--- a/board/amcc/acadia/memory.c
+++ b/board/amcc/acadia/memory.c
@@ -17,7 +17,6 @@
 
 extern void board_pll_init_f(void);
 
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
 static void cram_bcr_write(u32 wr_val)
 {
 	wr_val <<= 2;
@@ -41,20 +40,9 @@ static void cram_bcr_write(u32 wr_val)
 
 	return;
 }
-#endif
 
 phys_size_t initdram(int board_type)
 {
-#if defined(CONFIG_NAND_SPL)
-	u32 reg;
-
-	/* don't reinit PLL when booting via I2C bootstrap option */
-	mfsdr(SDR0_PINSTP, reg);
-	if (reg != 0xf0000000)
-		board_pll_init_f();
-#endif
-
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
 	int i;
 	u32 val;
 
@@ -88,7 +76,6 @@ phys_size_t initdram(int board_type)
 	/* Wait a short while, since for NAND booting this is too fast */
 	for (i=0; i<200000; i++)
 		;
-#endif
 
 	return (CONFIG_SYS_MBYTES_RAM << 20);
 }
diff --git a/board/amcc/acadia/pll.c b/board/amcc/acadia/pll.c
index d74b725ae5..d868582ba9 100644
--- a/board/amcc/acadia/pll.c
+++ b/board/amcc/acadia/pll.c
@@ -135,45 +135,3 @@ void board_pll_init_f(void)
 	mtcpr(CPR0_CLKUP, 0x40000000);
 }
 #endif				/* CPU_<speed>_405EZ */
-
-#if defined(CONFIG_NAND_SPL) || defined(CONFIG_SPI_SPL)
-/*
- * Get timebase clock frequency
- */
-unsigned long get_tbclk(void)
-{
-	unsigned long cpr_plld;
-	unsigned long cpr_primad;
-	unsigned long primad_cpudv;
-	unsigned long pllFbkDiv;
-	unsigned long freqProcessor;
-
-	/*
-	 * Read PLL Mode registers
-	 */
-	mfcpr(CPR0_PLLD, cpr_plld);
-
-	/*
-	 * Read CPR_PRIMAD register
-	 */
-	mfcpr(CPR0_PRIMAD, cpr_primad);
-
-	/*
-	 * Determine CPU clock frequency
-	 */
-	primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
-	if (primad_cpudv == 0)
-		primad_cpudv = 16;
-
-	/*
-	 * Determine FBK_DIV.
-	 */
-	pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
-	if (pllFbkDiv == 0)
-		pllFbkDiv = 256;
-
-	freqProcessor = (CONFIG_SYS_CLK_FREQ * pllFbkDiv) / primad_cpudv;
-
-	return (freqProcessor);
-}
-#endif /* defined(CONFIG_NAND_SPL) || defined(CONFIG_SPI_SPL) */
diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c
index 84bbacf4c5..c8d09636ab 100644
--- a/board/amcc/bamboo/bamboo.c
+++ b/board/amcc/bamboo/bamboo.c
@@ -16,7 +16,6 @@ void ext_bus_cntlr_init(void);
 void configure_ppc440ep_pins(void);
 int is_nand_selected(void);
 
-#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL))
 /*************************************************************************
  *
  * Bamboo has one bank onboard sdram (plus DIMM)
@@ -178,7 +177,6 @@ const unsigned char cfg_simulate_spd_eeprom[128] = {
 	0,
 	0
 };
-#endif
 
 #if 0
 {	   /* GPIO   Alternate1	      Alternate2	Alternate3 */
@@ -440,15 +438,11 @@ int checkboard(void)
 
 phys_size_t initdram (int board_type)
 {
-#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL))
 	long dram_size;
 
 	dram_size = spd_sdram();
 
 	return dram_size;
-#else
-	return CONFIG_SYS_MBYTES_SDRAM << 20;
-#endif
 }
 
 /*----------------------------------------------------------------------------+
@@ -1794,23 +1788,12 @@ void configure_ppc440ep_pins(void)
 	if (ppc440ep_core_selection[NAND_FLASH] == CORE_SELECTED)
 	{
 		update_ndfc_ios(gpio_tab);
-
-#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL))
 		mtsdr(SDR0_CUST0, SDR0_CUST0_MUX_NDFC_SEL   |
 		      SDR0_CUST0_NDFC_ENABLE	|
 		      SDR0_CUST0_NDFC_BW_8_BIT	|
 		      SDR0_CUST0_NDFC_ARE_MASK	|
 		      SDR0_CUST0_CHIPSELGAT_EN1 |
 		      SDR0_CUST0_CHIPSELGAT_EN2);
-#else
-		mtsdr(SDR0_CUST0, SDR0_CUST0_MUX_NDFC_SEL   |
-		      SDR0_CUST0_NDFC_ENABLE	|
-		      SDR0_CUST0_NDFC_BW_8_BIT	|
-		      SDR0_CUST0_NDFC_ARE_MASK	|
-		      SDR0_CUST0_CHIPSELGAT_EN0 |
-		      SDR0_CUST0_CHIPSELGAT_EN2);
-#endif
-
 		ndfc_selection_in_fpga();
 	}
 	else
diff --git a/board/amcc/bamboo/init.S b/board/amcc/bamboo/init.S
index 48dbcbe2a1..5c7c839079 100644
--- a/board/amcc/bamboo/init.S
+++ b/board/amcc/bamboo/init.S
@@ -32,12 +32,7 @@ tlbtab:
 	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
 	 * speed up boot process. It is patched after relocation to enable SA_I
 	 */
-#ifndef CONFIG_NAND_SPL
 	tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 0, AC_RWX | SA_G)
-#else
-	tlbentry(CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 0, AC_RWX | SA_G)
-	tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_IG)
-#endif
 
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
 	tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G)
@@ -58,31 +53,3 @@ tlbtab:
 	tlbentry(CONFIG_SYS_USB_DEVICE, SZ_1K, CONFIG_SYS_USB_DEVICE, 0, AC_RW | SA_IG)
 
 	tlbtab_end
-
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-	/*
-	 * For NAND booting the first TLB has to be reconfigured to full size
-	 * and with caching disabled after running from RAM!
-	 */
-#define TLB00	TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M)
-#define TLB01	TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 0)
-#define TLB02	TLB2(AC_RWX | SA_IG)
-
-	.globl	reconfig_tlb0
-reconfig_tlb0:
-	sync
-	isync
-	addi	r4,r0,0x0000		/* TLB entry #0 */
-	lis	r5,TLB00@h
-	ori	r5,r5,TLB00@l
-	tlbwe	r5,r4,0x0000		/* Save it out */
-	lis	r5,TLB01@h
-	ori	r5,r5,TLB01@l
-	tlbwe	r5,r4,0x0001		/* Save it out */
-	lis	r5,TLB02@h
-	ori	r5,r5,TLB02@l
-	tlbwe	r5,r4,0x0002		/* Save it out */
-	sync
-	isync
-	blr
-#endif
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
index 2b5f1a62cc..79d4babe06 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -379,11 +379,7 @@ int board_early_init_r (void)
 	 */
 
 	/* Remap the NOR FLASH to 0xcc00.0000 ... 0xcfff.ffff */
-#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
-	mtebc(PB3CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
-#else
 	mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
-#endif
 
 	/* Remove TLB entry of boot EBC mapping */
 	remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20);
diff --git a/board/amcc/canyonlands/init.S b/board/amcc/canyonlands/init.S
index d83cd6e754..bf00bd6bca 100644
--- a/board/amcc/canyonlands/init.S
+++ b/board/amcc/canyonlands/init.S
@@ -31,13 +31,7 @@ tlbtab:
 	 * use the speed up boot process. It is patched after relocation to
 	 * enable SA_I
 	 */
-#ifndef CONFIG_NAND_SPL
 	tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M, CONFIG_SYS_BOOT_BASE_ADDR, 4, AC_RWX | SA_G) /* TLB 0 */
-#else
-	tlbentry(CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 4, AC_RWX | SA_G)
-	tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_IG)
-	tlbentry(256 << 20, SZ_256M, 256 << 20, 0, AC_RWX | SA_IG)
-#endif
 
 	/*
 	 * TLB entries for SDRAM are not needed on this platform.
@@ -95,31 +89,3 @@ tlbtab:
 #endif
 
 	tlbtab_end
-
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-	/*
-	 * For NAND booting the first TLB has to be reconfigured to full size
-	 * and with caching disabled after running from RAM!
-	 */
-#define TLB00	TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M)
-#define TLB01	TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 1)
-#define TLB02	TLB2(AC_RWX | SA_IG)
-
-	.globl	reconfig_tlb0
-reconfig_tlb0:
-	sync
-	isync
-	addi	r4,r0,0x0000		/* TLB entry #0 */
-	lis	r5,TLB00@h
-	ori	r5,r5,TLB00@l
-	tlbwe	r5,r4,0x0000		/* Save it out */
-	lis	r5,TLB01@h
-	ori	r5,r5,TLB01@l
-	tlbwe	r5,r4,0x0001		/* Save it out */
-	lis	r5,TLB02@h
-	ori	r5,r5,TLB02@l
-	tlbwe	r5,r4,0x0002		/* Save it out */
-	sync
-	isync
-	blr
-#endif
diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S
index b31e9db3f9..f876639d35 100644
--- a/board/amcc/sequoia/init.S
+++ b/board/amcc/sequoia/init.S
@@ -48,11 +48,7 @@ tlbtab:
 	/* BOOT_CS (FLASH) must be forth. Before relocation SA_I can be off to use the
 	 * speed up boot process. It is patched after relocation to enable SA_I
 	 */
-#ifndef CONFIG_NAND_SPL
 	tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_RWX | SA_G )
-#else
-	tlbentry( CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 1, AC_RWX | SA_G )
-#endif
 
 #ifdef CONFIG_SYS_INIT_RAM_DCACHE
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
@@ -81,31 +77,3 @@ tlbtab:
 	tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_RWX | SA_IG)
 
 	tlbtab_end
-
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-	/*
-	 * For NAND booting the first TLB has to be reconfigured to full size
-	 * and with caching disabled after running from RAM!
-	 */
-#define TLB00	TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M)
-#define TLB01	TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 1)
-#define TLB02	TLB2(AC_RWX | SA_IG)
-
-	.globl	reconfig_tlb0
-reconfig_tlb0:
-	sync
-	isync
-	addi	r4,r0,CONFIG_SYS_TLB_FOR_BOOT_FLASH /* TLB entry # */
-	lis	r5,TLB00@h
-	ori	r5,r5,TLB00@l
-	tlbwe	r5,r4,0x0000		/* Save it out */
-	lis	r5,TLB01@h
-	ori	r5,r5,TLB01@l
-	tlbwe	r5,r4,0x0001		/* Save it out */
-	lis	r5,TLB02@h
-	ori	r5,r5,TLB02@l
-	tlbwe	r5,r4,0x0002		/* Save it out */
-	sync
-	isync
-	blr
-#endif
diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c
index 2c5a21806a..67640d7edf 100644
--- a/board/amcc/sequoia/sdram.c
+++ b/board/amcc/sequoia/sdram.c
@@ -26,14 +26,6 @@
 extern int denali_wait_for_dlllock(void);
 extern void denali_core_search_data_eye(void);
 
-#if defined(CONFIG_NAND_SPL)
-/* Using arch/powerpc/cpu/ppc4xx/speed.c to calculate the bus frequency is too big
- * for the 4k NAND boot image so define bus_frequency to 133MHz here
- * which is save for the refresh counter setup.
- */
-#define get_bus_freq(val)	133333333
-#endif
-
 /*************************************************************************
  *
  * initdram -- 440EPx's DDR controller is a DENALI Core
@@ -41,8 +33,7 @@ extern void denali_core_search_data_eye(void);
  ************************************************************************/
 phys_size_t initdram (int board_type)
 {
-#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_SYS_RAMBOOT)) || \
-    defined(CONFIG_NAND_SPL)
+#if !defined(CONFIG_SYS_RAMBOOT)
 	ulong speed = get_bus_freq(0);
 
 	mtsdram(DDR0_02, 0x00000000);
@@ -81,7 +72,7 @@ phys_size_t initdram (int board_type)
 	mtsdram(DDR0_02, 0x00000001);
 
 	denali_wait_for_dlllock();
-#endif /* #ifndef CONFIG_NAND_U_BOOT */
+#endif /* #ifndef CONFIG_SYS_RAMBOOT */
 
 #ifdef CONFIG_DDR_DATA_EYE
 	/* -----------------------------------------------------------+
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index 73c65c56aa..53f9b3419f 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -142,8 +142,7 @@ int misc_init_r(void)
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
 	gd->bd->bi_flashoffset = 0;
 
-#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) || \
-    defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
 	mtdcr(EBC0_CFGADDR, PB3CR);
 #else
 	mtdcr(EBC0_CFGADDR, PB0CR);
@@ -151,8 +150,7 @@ int misc_init_r(void)
 	pbcr = mfdcr(EBC0_CFGDATA);
 	size_val = ffs(gd->bd->bi_flashsize) - 21;
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) || \
-    defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
 	mtdcr(EBC0_CFGADDR, PB3CR);
 #else
 	mtdcr(EBC0_CFGADDR, PB0CR);
@@ -360,7 +358,7 @@ void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
 }
 #endif
 
-#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
 /*
  * On NAND-booting sequoia, we need to patch the chips select numbers
  * in the dtb (CS0 - NAND, CS3 - NOR)
@@ -411,4 +409,4 @@ void ft_board_setup(void *blob, bd_t *bd)
 		return;
 	}
 }
-#endif /* CONFIG_NAND_U_BOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index d42a1730cc..db29879801 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -7,7 +7,7 @@
  */
 
 #include <common.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 #include <asm/arch/at91sam9263.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
@@ -24,6 +24,7 @@
 #include <net.h>
 #endif
 #include <netdev.h>
+#include <atmel_mci.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -214,6 +215,15 @@ void lcd_show_board_info(void)
 #endif /* CONFIG_LCD_INFO */
 #endif
 
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+int board_mmc_init(bd_t *bd)
+{
+	at91_mci_hw_init();
+
+	return atmel_mci_init((void *)ATMEL_BASE_MCI1);
+}
+#endif
+
 int board_early_init_f(void)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
diff --git a/board/atmel/sama5d3_xplained/Makefile b/board/atmel/sama5d3_xplained/Makefile
new file mode 100644
index 0000000000..ec82b06990
--- /dev/null
+++ b/board/atmel/sama5d3_xplained/Makefile
@@ -0,0 +1,15 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian@popies.net>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# (C) Copyright 2014
+# Bo Shen <voice.shen@atmel.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += sama5d3_xplained.o
diff --git a/board/atmel/sama5d3_xplained/sama5d3_xplained.c b/board/atmel/sama5d3_xplained/sama5d3_xplained.c
new file mode 100644
index 0000000000..39f2dc6475
--- /dev/null
+++ b/board/atmel/sama5d3_xplained/sama5d3_xplained.c
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2014 Atmel Corporation
+ *		      Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <asm/io.h>
+#include <asm/arch/sama5d3_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/clk.h>
+#include <atmel_mci.h>
+#include <net.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_NAND_ATMEL
+void sama5d3_xplained_nand_hw_init(void)
+{
+	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+
+	at91_periph_clk_enable(ATMEL_ID_SMC);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(1) |
+	       AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(1),
+	       &smc->cs[3].setup);
+	writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(5) |
+	       AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(5),
+	       &smc->cs[3].pulse);
+	writel(AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(8),
+	       &smc->cs[3].cycle);
+	writel(AT91_SMC_TIMINGS_TCLR(3) | AT91_SMC_TIMINGS_TADL(10) |
+	       AT91_SMC_TIMINGS_TAR(3)  | AT91_SMC_TIMINGS_TRR(4)   |
+	       AT91_SMC_TIMINGS_TWB(5)  | AT91_SMC_TIMINGS_RBNSEL(3)|
+	       AT91_SMC_TIMINGS_NFSEL(1), &smc->cs[3].timings);
+	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+	       AT91_SMC_MODE_EXNW_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+	       AT91_SMC_MODE_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+	       AT91_SMC_MODE_DBW_8 |
+#endif
+	       AT91_SMC_MODE_TDF_CYCLE(3),
+	       &smc->cs[3].mode);
+}
+#endif
+
+#ifdef CONFIG_CMD_USB
+static void sama5d3_xplained_usb_hw_init(void)
+{
+	at91_set_pio_output(AT91_PIO_PORTE, 3, 0);
+	at91_set_pio_output(AT91_PIO_PORTE, 4, 0);
+}
+#endif
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+static void sama5d3_xplained_mci0_hw_init(void)
+{
+	at91_mci_hw_init();
+
+	at91_set_pio_output(AT91_PIO_PORTE, 2, 0);	/* MCI0 Power */
+}
+#endif
+
+int board_early_init_f(void)
+{
+	at91_periph_clk_enable(ATMEL_ID_PIOA);
+	at91_periph_clk_enable(ATMEL_ID_PIOB);
+	at91_periph_clk_enable(ATMEL_ID_PIOC);
+	at91_periph_clk_enable(ATMEL_ID_PIOD);
+	at91_periph_clk_enable(ATMEL_ID_PIOE);
+
+	at91_seriald_hw_init();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_NAND_ATMEL
+	sama5d3_xplained_nand_hw_init();
+#endif
+#ifdef CONFIG_CMD_USB
+	sama5d3_xplained_usb_hw_init();
+#endif
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+	sama5d3_xplained_mci0_hw_init();
+#endif
+#ifdef CONFIG_MACB
+	at91_gmac_hw_init();
+	at91_macb_hw_init();
+#endif
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+				    CONFIG_SYS_SDRAM_SIZE);
+
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_MACB
+	macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC, 0x00);
+	macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+int board_mmc_init(bd_t *bis)
+{
+	atmel_mci_init((void *)ATMEL_BASE_MCI0);
+
+	return 0;
+}
+#endif
diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c
index eff94a48b2..c835c12d02 100644
--- a/board/atmel/sama5d3xek/sama5d3xek.c
+++ b/board/atmel/sama5d3xek/sama5d3xek.c
@@ -307,6 +307,10 @@ void spl_board_init(void)
 {
 #ifdef CONFIG_SYS_USE_MMC
 	sama5d3xek_mci_hw_init();
+#elif CONFIG_SYS_USE_NANDFLASH
+	sama5d3xek_nand_hw_init();
+#elif CONFIG_SYS_USE_SERIALFLASH
+	at91_spi0_hw_init(1 << 0);
 #endif
 }
 
diff --git a/board/avnet/fx12mm/.gitignore b/board/avnet/fx12mm/.gitignore
deleted file mode 100644
index b644f59941..0000000000
--- a/board/avnet/fx12mm/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-config.tmp
diff --git a/board/avnet/fx12mm/Makefile b/board/avnet/fx12mm/Makefile
index 37fb02f0aa..618b42f891 100644
--- a/board/avnet/fx12mm/Makefile
+++ b/board/avnet/fx12mm/Makefile
@@ -8,4 +8,4 @@
 
 obj-y	+= fx12mm.o
 
-include $(SRCTREE)/board/xilinx/ppc405-generic/Makefile
+include $(srctree)/board/xilinx/ppc405-generic/Makefile
diff --git a/board/avnet/v5fx30teval/.gitignore b/board/avnet/v5fx30teval/.gitignore
deleted file mode 100644
index f6418a0c50..0000000000
--- a/board/avnet/v5fx30teval/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/config.tmp
diff --git a/board/avnet/v5fx30teval/Makefile b/board/avnet/v5fx30teval/Makefile
index f7d0417a2c..8c41af02d4 100644
--- a/board/avnet/v5fx30teval/Makefile
+++ b/board/avnet/v5fx30teval/Makefile
@@ -8,4 +8,4 @@
 
 obj-y	+= v5fx30teval.o
 
-include $(SRCTREE)/board/xilinx/ppc440-generic/Makefile
+include $(srctree)/board/xilinx/ppc440-generic/Makefile
diff --git a/board/bct-brettl2/config.mk b/board/bct-brettl2/config.mk
deleted file mode 100644
index 0d3df2dbd9..0000000000
--- a/board/bct-brettl2/config.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
diff --git a/board/bf518f-ezbrd/config.mk b/board/bf518f-ezbrd/config.mk
deleted file mode 100644
index 0d3df2dbd9..0000000000
--- a/board/bf518f-ezbrd/config.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
diff --git a/board/bf526-ezbrd/config.mk b/board/bf526-ezbrd/config.mk
deleted file mode 100644
index 0d3df2dbd9..0000000000
--- a/board/bf526-ezbrd/config.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
diff --git a/board/bf527-ad7160-eval/config.mk b/board/bf527-ad7160-eval/config.mk
deleted file mode 100644
index 0d3df2dbd9..0000000000
--- a/board/bf527-ad7160-eval/config.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
diff --git a/board/bf527-ezkit/config.mk b/board/bf527-ezkit/config.mk
deleted file mode 100644
index 0d3df2dbd9..0000000000
--- a/board/bf527-ezkit/config.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
diff --git a/board/bf527-sdp/config.mk b/board/bf527-sdp/config.mk
index af299f5f1e..1d46cfcd48 100644
--- a/board/bf527-sdp/config.mk
+++ b/board/bf527-sdp/config.mk
@@ -7,10 +7,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 6
diff --git a/board/bf533-ezkit/config.mk b/board/bf533-ezkit/config.mk
index 97eaafef2e..7f9138b09b 100644
--- a/board/bf533-ezkit/config.mk
+++ b/board/bf533-ezkit/config.mk
@@ -7,10 +7,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
diff --git a/board/bf533-stamp/config.mk b/board/bf533-stamp/config.mk
index 97eaafef2e..7f9138b09b 100644
--- a/board/bf533-stamp/config.mk
+++ b/board/bf533-stamp/config.mk
@@ -7,10 +7,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
diff --git a/board/bf537-stamp/config.mk b/board/bf537-stamp/config.mk
index bc0e7476e5..ab0fbecab9 100644
--- a/board/bf537-stamp/config.mk
+++ b/board/bf537-stamp/config.mk
@@ -7,11 +7,6 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
 LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
diff --git a/board/bf538f-ezkit/config.mk b/board/bf538f-ezkit/config.mk
index 97eaafef2e..7f9138b09b 100644
--- a/board/bf538f-ezkit/config.mk
+++ b/board/bf538f-ezkit/config.mk
@@ -7,10 +7,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
diff --git a/board/bf548-ezkit/config.mk b/board/bf548-ezkit/config.mk
index 8d2c60f308..7bb8e9c9ee 100644
--- a/board/bf548-ezkit/config.mk
+++ b/board/bf548-ezkit/config.mk
@@ -7,11 +7,6 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA       := --dma 6
 LDR_FLAGS-BFIN_BOOT_FIFO       := --dma 1
diff --git a/board/bf561-acvilon/config.mk b/board/bf561-acvilon/config.mk
index ce94715572..854d7dbb86 100644
--- a/board/bf561-acvilon/config.mk
+++ b/board/bf561-acvilon/config.mk
@@ -7,10 +7,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
diff --git a/board/bf561-ezkit/config.mk b/board/bf561-ezkit/config.mk
index ce94715572..854d7dbb86 100644
--- a/board/bf561-ezkit/config.mk
+++ b/board/bf561-ezkit/config.mk
@@ -7,10 +7,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
diff --git a/board/br4/config.mk b/board/br4/config.mk
deleted file mode 100644
index 2436ec07f4..0000000000
--- a/board/br4/config.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Copyright (c) Switchfin Org. <dpn@switchfin.org>
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
diff --git a/board/cm-bf527/config.mk b/board/cm-bf527/config.mk
deleted file mode 100644
index 0d3df2dbd9..0000000000
--- a/board/cm-bf527/config.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
diff --git a/board/cm-bf533/config.mk b/board/cm-bf533/config.mk
index 97eaafef2e..7f9138b09b 100644
--- a/board/cm-bf533/config.mk
+++ b/board/cm-bf533/config.mk
@@ -7,10 +7,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
diff --git a/board/cm-bf537e/config.mk b/board/cm-bf537e/config.mk
index 97eaafef2e..7f9138b09b 100644
--- a/board/cm-bf537e/config.mk
+++ b/board/cm-bf537e/config.mk
@@ -7,10 +7,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
diff --git a/board/cm-bf537u/config.mk b/board/cm-bf537u/config.mk
index 97eaafef2e..7f9138b09b 100644
--- a/board/cm-bf537u/config.mk
+++ b/board/cm-bf537u/config.mk
@@ -7,10 +7,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
diff --git a/board/cm-bf548/config.mk b/board/cm-bf548/config.mk
index 289c8a488e..beb9834649 100644
--- a/board/cm-bf548/config.mk
+++ b/board/cm-bf548/config.mk
@@ -7,11 +7,6 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA       := --dma 6
 LDR_FLAGS-BFIN_BOOT_FIFO       := --dma 1
diff --git a/board/cm-bf561/config.mk b/board/cm-bf561/config.mk
index ce94715572..854d7dbb86 100644
--- a/board/cm-bf561/config.mk
+++ b/board/cm-bf561/config.mk
@@ -7,10 +7,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
diff --git a/board/cogent/mb.c b/board/cogent/mb.c
index 3eea47d3e8..c0256433ce 100644
--- a/board/cogent/mb.c
+++ b/board/cogent/mb.c
@@ -14,7 +14,7 @@
 
 /* ------------------------------------------------------------------------- */
 
-#if defined(CONFIG_8260)
+#if defined(CONFIG_MPC8260)
 
 #include <ioports.h>
 
@@ -186,7 +186,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	 }
 };
 
-#endif /* CONFIG_8260 */
+#endif /* CONFIG_MPC8260 */
 
 /* ------------------------------------------------------------------------- */
 
diff --git a/board/cogent/serial.c b/board/cogent/serial.c
index f0d6b22cfd..95c8120722 100644
--- a/board/cogent/serial.c
+++ b/board/cogent/serial.c
@@ -13,7 +13,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #if (CMA_MB_CAPS & CMA_MB_CAP_SERPAR)
 
 #if (defined(CONFIG_8xx) && defined(CONFIG_8xx_CONS_NONE)) || \
-     (defined(CONFIG_8260) && defined(CONFIG_CONS_NONE))
+	(defined(CONFIG_MPC8260) && defined(CONFIG_CONS_NONE))
 
 #if CONFIG_CONS_INDEX == 1
 #define CMA_MB_SERIAL_BASE	CMA_MB_SERIALA_BASE
diff --git a/board/compulab/cm_t335/spl.c b/board/compulab/cm_t335/spl.c
index b3b150a577..d57436445e 100644
--- a/board/compulab/cm_t335/spl.c
+++ b/board/compulab/cm_t335/spl.c
@@ -18,7 +18,7 @@
 #include <asm/arch/clocks_am33xx.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/hardware_am33xx.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 
 const struct ctrl_ioregs ioregs = {
 	.cm0ioctl		= MT41J128MJT125_IOCTRL_VALUE,
diff --git a/board/cray/L1/.gitignore b/board/cray/L1/.gitignore
new file mode 100644
index 0000000000..cd76d660ef
--- /dev/null
+++ b/board/cray/L1/.gitignore
@@ -0,0 +1,2 @@
+bootscript.c
+bootscript.image
diff --git a/board/cray/L1/Makefile b/board/cray/L1/Makefile
index 63f43dab29..655f530f2e 100644
--- a/board/cray/L1/Makefile
+++ b/board/cray/L1/Makefile
@@ -9,10 +9,19 @@ obj-y	= L1.o flash.o
 obj-y	+= init.o
 obj-y	+= bootscript.o
 
-$(obj)/bootscript.c: $(obj)/bootscript.image
-	od -t x1 -v -A x $^ | awk -f $(srctree)/$(src)/x2c.awk > $@
+quiet_cmd_awk = AWK     $@
+      cmd_awk = od -t x1 -v -A x $< | $(AWK) -f $(filter-out $<,$^) > $@
 
+$(obj)/bootscript.c: $(obj)/bootscript.image $(src)/x2c.awk
+	$(call cmd,awk)
+
+quiet_cmd_mkimage = UIMAGE  $@
+cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
+        $(if $(KBUILD_VERBOSE:1=), >/dev/null)
+
+MKIMAGEFLAGS_bootscript.image := -A ppc -O linux -T script -C none \
+						-a 0 -e 0 -n bootscript
 $(obj)/bootscript.image: $(src)/bootscript.hush
-	-$(OBJTREE)/tools/mkimage -A ppc -O linux -T script -C none -a 0 -e 0 -n bootscript -d $< $@
+	$(call cmd,mkimage)
 
 clean-files := bootscript.c bootscript.image
 \ No newline at end of file
diff --git a/board/esd/pmc440/init.S b/board/esd/pmc440/init.S
index cc8030b5e5..1f26fad147 100644
--- a/board/esd/pmc440/init.S
+++ b/board/esd/pmc440/init.S
@@ -27,11 +27,7 @@ tlbtab:
 	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
 	 * speed up boot process. It is patched after relocation to enable SA_I
 	 */
-#ifndef CONFIG_NAND_SPL
 	tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_RWX | SA_G )
-#else
-	tlbentry( CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 1, AC_RWX | SA_G )
-#endif
 
 	/* TLB entries for DDR2 SDRAM are generated dynamically */
 
@@ -71,31 +67,3 @@ tlbtab:
 
 	/* TODO:  what about high IO space */
 	tlbtab_end
-
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-	/*
-	 * For NAND booting the first TLB has to be reconfigured to full size
-	 * and with caching disabled after running from RAM!
-	 */
-#define TLB00	TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M)
-#define TLB01	TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 1)
-#define TLB02	TLB2(AC_RWX | SA_IG)
-
-	.globl	reconfig_tlb0
-reconfig_tlb0:
-	sync
-	isync
-	addi	r4,r0,0x0000		/* TLB entry #0 */
-	lis	r5,TLB00@h
-	ori	r5,r5,TLB00@l
-	tlbwe	r5,r4,0x0000		/* Save it out */
-	lis	r5,TLB01@h
-	ori	r5,r5,TLB01@l
-	tlbwe	r5,r4,0x0001		/* Save it out */
-	lis	r5,TLB02@h
-	ori	r5,r5,TLB02@l
-	tlbwe	r5,r4,0x0002		/* Save it out */
-	sync
-	isync
-	blr
-#endif
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
index 88fc5f77b6..e86996c55f 100644
--- a/board/esd/pmc440/pmc440.c
+++ b/board/esd/pmc440/pmc440.c
@@ -229,19 +229,11 @@ int misc_init_r(void)
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
 	gd->bd->bi_flashoffset = 0;
 
-#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
-	mtdcr(EBC0_CFGADDR, PB2CR);
-#else
 	mtdcr(EBC0_CFGADDR, PB0CR);
-#endif
 	pbcr = mfdcr(EBC0_CFGDATA);
 	size_val = ffs(gd->bd->bi_flashsize) - 21;
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
-	mtdcr(EBC0_CFGADDR, PB2CR);
-#else
 	mtdcr(EBC0_CFGADDR, PB0CR);
-#endif
 	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/*
diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c
index f6b012dbbc..d9c88a074f 100644
--- a/board/freescale/b4860qds/b4860qds.c
+++ b/board/freescale/b4860qds/b4860qds.c
@@ -11,6 +11,7 @@
 #include <linux/compiler.h>
 #include <asm/mmu.h>
 #include <asm/processor.h>
+#include <asm/errno.h>
 #include <asm/cache.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_law.h>
@@ -28,7 +29,6 @@
 
 #define CLK_MUX_SEL_MASK	0x4
 #define ETH_PHY_CLK_OUT		0x4
-#define PLL_NUM			2
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -120,6 +120,7 @@ int configure_vsc3316_3308(void)
 	debug("Using SERDES2 Protocol: 0x%x:\n", serdes2_prtcl);
 
 	switch (serdes1_prtcl) {
+	case 0x29:
 	case 0x2a:
 	case 0x2C:
 	case 0x2D:
@@ -151,7 +152,55 @@ int configure_vsc3316_3308(void)
 		}
 		break;
 
+	case 0x02:
+	case 0x04:
+	case 0x05:
+	case 0x06:
+	case 0x08:
+	case 0x09:
+	case 0x0A:
+	case 0x0B:
+	case 0x0C:
+	case 0x30:
+	case 0x32:
+	case 0x33:
+	case 0x34:
+	case 0x39:
+	case 0x3A:
+	case 0x3C:
+	case 0x3D:
+	case 0x5C:
+	case 0x5D:
+			/*
+			 * Configuration:
+			 * SERDES: 1
+			 * Lanes: A,B: AURORA
+			 * Lanes: C,d: SGMII
+			 * Lanes: E,F,G,H: CPRI
+			 */
+		debug("Configuring crossbar for Aurora, SGMII 3 and 4,"
+				" and CPRI. srds_prctl:%x\n", serdes1_prtcl);
+		num_vsc16_con = NUM_CON_VSC3316;
+		/* Configure VSC3316 crossbar switch */
+		ret = select_i2c_ch_pca(I2C_CH_VSC3316);
+		if (!ret) {
+			ret = vsc3316_config(VSC3316_TX_ADDRESS,
+					vsc16_tx_sfp_sgmii_aurora,
+					num_vsc16_con);
+			if (ret)
+				return ret;
+			ret = vsc3316_config(VSC3316_RX_ADDRESS,
+					vsc16_rx_sfp_sgmii_aurora,
+					num_vsc16_con);
+			if (ret)
+				return ret;
+		} else {
+			return ret;
+		}
+		break;
+
 #ifdef CONFIG_PPC_B4420
+	case 0x17:
 	case 0x18:
 			/*
 			 * Configuration:
@@ -239,14 +288,191 @@ int configure_vsc3316_3308(void)
 	return 0;
 }
 
+static int calibrate_pll(serdes_corenet_t *srds_regs, int pll_num)
+{
+	u32 rst_err;
+
+	/* Steps For SerDes PLLs reset and reconfiguration
+	 * or PLL power-up procedure
+	 */
+	debug("CALIBRATE PLL:%d\n", pll_num);
+	clrbits_be32(&srds_regs->bank[pll_num].rstctl,
+			SRDS_RSTCTL_SDRST_B);
+	udelay(10);
+	clrbits_be32(&srds_regs->bank[pll_num].rstctl,
+		(SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B));
+	udelay(10);
+	setbits_be32(&srds_regs->bank[pll_num].rstctl,
+			SRDS_RSTCTL_RST);
+	setbits_be32(&srds_regs->bank[pll_num].rstctl,
+		(SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B
+		| SRDS_RSTCTL_SDRST_B));
+
+	udelay(20);
+
+	/* Check whether PLL has been locked or not */
+	rst_err = in_be32(&srds_regs->bank[pll_num].rstctl) &
+				SRDS_RSTCTL_RSTERR;
+	rst_err >>= SRDS_RSTCTL_RSTERR_SHIFT;
+	debug("RST_ERR value for PLL %d is: 0x%x:\n", pll_num, rst_err);
+	if (rst_err)
+		return rst_err;
+
+	return rst_err;
+}
+
+static int check_pll_locks(serdes_corenet_t *srds_regs, int pll_num)
+{
+	int ret = 0;
+	u32 fcap, dcbias, bcap, pllcr1, pllcr0;
+
+	if (calibrate_pll(srds_regs, pll_num)) {
+		/* STEP 1 */
+		/* Read fcap, dcbias and bcap value */
+		clrbits_be32(&srds_regs->bank[pll_num].pllcr0,
+				SRDS_PLLCR0_DCBIAS_OUT_EN);
+		fcap = in_be32(&srds_regs->bank[pll_num].pllsr2) &
+					SRDS_PLLSR2_FCAP;
+		fcap >>= SRDS_PLLSR2_FCAP_SHIFT;
+		bcap = in_be32(&srds_regs->bank[pll_num].pllsr2) &
+					SRDS_PLLSR2_BCAP_EN;
+		bcap >>= SRDS_PLLSR2_BCAP_EN_SHIFT;
+		setbits_be32(&srds_regs->bank[pll_num].pllcr0,
+				SRDS_PLLCR0_DCBIAS_OUT_EN);
+		dcbias = in_be32(&srds_regs->bank[pll_num].pllsr2) &
+					SRDS_PLLSR2_DCBIAS;
+		dcbias >>= SRDS_PLLSR2_DCBIAS_SHIFT;
+		debug("values of bcap:%x, fcap:%x and dcbias:%x\n",
+					bcap, fcap, dcbias);
+		if (fcap == 0 && bcap == 1) {
+			/* Step 3 */
+			clrbits_be32(&srds_regs->bank[pll_num].rstctl,
+				(SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B
+				 | SRDS_RSTCTL_SDRST_B));
+			clrbits_be32(&srds_regs->bank[pll_num].pllcr1,
+					SRDS_PLLCR1_BCAP_EN);
+			setbits_be32(&srds_regs->bank[pll_num].pllcr1,
+					SRDS_PLLCR1_BCAP_OVD);
+			if (calibrate_pll(srds_regs, pll_num)) {
+				/*save the fcap, dcbias and bcap values*/
+				clrbits_be32(&srds_regs->bank[pll_num].pllcr0,
+						SRDS_PLLCR0_DCBIAS_OUT_EN);
+				fcap = in_be32(&srds_regs->bank[pll_num].pllsr2)
+					& SRDS_PLLSR2_FCAP;
+				fcap >>= SRDS_PLLSR2_FCAP_SHIFT;
+				bcap = in_be32(&srds_regs->bank[pll_num].pllsr2)
+					& SRDS_PLLSR2_BCAP_EN;
+				bcap >>= SRDS_PLLSR2_BCAP_EN_SHIFT;
+				setbits_be32(&srds_regs->bank[pll_num].pllcr0,
+						SRDS_PLLCR0_DCBIAS_OUT_EN);
+				dcbias = in_be32
+					(&srds_regs->bank[pll_num].pllsr2) &
+							SRDS_PLLSR2_DCBIAS;
+				dcbias >>= SRDS_PLLSR2_DCBIAS_SHIFT;
+
+				/* Step 4*/
+				clrbits_be32(&srds_regs->bank[pll_num].rstctl,
+				(SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B
+				 | SRDS_RSTCTL_SDRST_B));
+				setbits_be32(&srds_regs->bank[pll_num].pllcr1,
+						SRDS_PLLCR1_BYP_CAL);
+				clrbits_be32(&srds_regs->bank[pll_num].pllcr1,
+						SRDS_PLLCR1_BCAP_EN);
+				setbits_be32(&srds_regs->bank[pll_num].pllcr1,
+						SRDS_PLLCR1_BCAP_OVD);
+				/* change the fcap and dcbias to the saved
+				 * values from Step 3 */
+				clrbits_be32(&srds_regs->bank[pll_num].pllcr1,
+							SRDS_PLLCR1_PLL_FCAP);
+				pllcr1 = (in_be32
+					(&srds_regs->bank[pll_num].pllcr1)|
+					(fcap << SRDS_PLLCR1_PLL_FCAP_SHIFT));
+				out_be32(&srds_regs->bank[pll_num].pllcr1,
+							pllcr1);
+				clrbits_be32(&srds_regs->bank[pll_num].pllcr0,
+						SRDS_PLLCR0_DCBIAS_OVRD);
+				pllcr0 = (in_be32
+				(&srds_regs->bank[pll_num].pllcr0)|
+				(dcbias << SRDS_PLLCR0_DCBIAS_OVRD_SHIFT));
+				out_be32(&srds_regs->bank[pll_num].pllcr0,
+							pllcr0);
+				ret = calibrate_pll(srds_regs, pll_num);
+				if (ret)
+					return ret;
+			} else {
+				goto out;
+			}
+		} else { /* Step 5 */
+			clrbits_be32(&srds_regs->bank[pll_num].rstctl,
+				(SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B
+				 | SRDS_RSTCTL_SDRST_B));
+			udelay(10);
+			/* Change the fcap, dcbias, and bcap to the
+			 * values from Step 1 */
+			setbits_be32(&srds_regs->bank[pll_num].pllcr1,
+					SRDS_PLLCR1_BYP_CAL);
+			clrbits_be32(&srds_regs->bank[pll_num].pllcr1,
+						SRDS_PLLCR1_PLL_FCAP);
+			pllcr1 = (in_be32(&srds_regs->bank[pll_num].pllcr1)|
+				(fcap << SRDS_PLLCR1_PLL_FCAP_SHIFT));
+			out_be32(&srds_regs->bank[pll_num].pllcr1,
+						pllcr1);
+			clrbits_be32(&srds_regs->bank[pll_num].pllcr0,
+						SRDS_PLLCR0_DCBIAS_OVRD);
+			pllcr0 = (in_be32(&srds_regs->bank[pll_num].pllcr0)|
+				(dcbias << SRDS_PLLCR0_DCBIAS_OVRD_SHIFT));
+			out_be32(&srds_regs->bank[pll_num].pllcr0,
+						pllcr0);
+			clrbits_be32(&srds_regs->bank[pll_num].pllcr1,
+					SRDS_PLLCR1_BCAP_EN);
+			setbits_be32(&srds_regs->bank[pll_num].pllcr1,
+					SRDS_PLLCR1_BCAP_OVD);
+			ret = calibrate_pll(srds_regs, pll_num);
+			if (ret)
+				return ret;
+		}
+	}
+out:
+	return 0;
+}
+
+static int check_serdes_pll_locks(void)
+{
+	serdes_corenet_t *srds1_regs =
+		(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+	serdes_corenet_t *srds2_regs =
+		(void *)CONFIG_SYS_FSL_CORENET_SERDES2_ADDR;
+	int i, ret1, ret2;
+
+	debug("\nSerDes1 Lock check\n");
+	for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) {
+		ret1 = check_pll_locks(srds1_regs, i);
+		if (ret1) {
+			printf("SerDes1, PLL:%d didnt lock\n", i);
+			return ret1;
+		}
+	}
+	debug("\nSerDes2 Lock check\n");
+	for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) {
+		ret2 = check_pll_locks(srds2_regs, i);
+		if (ret2) {
+			printf("SerDes2, PLL:%d didnt lock\n", i);
+			return ret2;
+		}
+	}
+
+	return 0;
+}
+
 int config_serdes1_refclks(void)
 {
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	serdes_corenet_t *srds_regs =
 		(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
 	u32 serdes1_prtcl, lane;
-	unsigned int flag_sgmii_prtcl = 0;
-	int ret, i;
+	unsigned int flag_sgmii_aurora_prtcl = 0;
+	int i;
+	int ret = 0;
 
 	serdes1_prtcl = in_be32(&gur->rcwsr[4]) &
 			FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
@@ -257,10 +483,12 @@ int config_serdes1_refclks(void)
 	serdes1_prtcl >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
 	debug("Using SERDES1 Protocol: 0x%x:\n", serdes1_prtcl);
 
-	/* Clear SRDS_RSTCTL_RST bit for both PLLs before changing refclks
+	/* To prevent generation of reset request from SerDes
+	 * while changing the refclks, By setting SRDS_RST_MSK bit,
+	 * SerDes reset event cannot cause a reset request
 	 */
-	for (i = 0; i < PLL_NUM; i++)
-		clrbits_be32(&srds_regs->bank[i].rstctl, SRDS_RSTCTL_RST);
+	setbits_be32(&gur->rstrqmr1, FSL_CORENET_RSTRQMR1_SRDS_RST_MSK);
+
 	/* Reconfigure IDT idt8t49n222a device for CPRI to work
 	 * For this SerDes1's Refclk1 and refclk2 need to be set
 	 * to 122.88MHz
@@ -270,6 +498,25 @@ int config_serdes1_refclks(void)
 	case 0x2C:
 	case 0x2D:
 	case 0x2E:
+	case 0x02:
+	case 0x04:
+	case 0x05:
+	case 0x06:
+	case 0x08:
+	case 0x09:
+	case 0x0A:
+	case 0x0B:
+	case 0x0C:
+	case 0x30:
+	case 0x32:
+	case 0x33:
+	case 0x34:
+	case 0x39:
+	case 0x3A:
+	case 0x3C:
+	case 0x3D:
+	case 0x5C:
+	case 0x5D:
 		debug("Configuring idt8t49n222a for CPRI SerDes clks:"
 			" for srds_prctl:%x\n", serdes1_prtcl);
 		ret = select_i2c_ch_pca(I2C_CH_IDT);
@@ -279,16 +526,16 @@ int config_serdes1_refclks(void)
 					SERDES_REFCLK_122_88, 0);
 			if (ret) {
 				printf("IDT8T49N222A configuration failed.\n");
-				return ret;
+				goto out;
 			} else
-				printf("IDT8T49N222A configured.\n");
+				debug("IDT8T49N222A configured.\n");
 		} else {
-			return ret;
+			goto out;
 		}
 		select_i2c_ch_pca(I2C_CH_DEFAULT);
 
 		/* Change SerDes1's Refclk1 to 125MHz for on board
-		 * SGMIIs to work
+		 * SGMIIs or Aurora to work
 		 */
 		for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
 			enum srds_prtcl lane_prtcl = serdes_get_prtcl
@@ -300,20 +547,21 @@ int config_serdes1_refclks(void)
 			case SGMII_FM1_DTSEC4:
 			case SGMII_FM1_DTSEC5:
 			case SGMII_FM1_DTSEC6:
-				flag_sgmii_prtcl++;
+			case AURORA:
+				flag_sgmii_aurora_prtcl++;
 				break;
 			default:
 				break;
 			}
 		}
 
-		if (flag_sgmii_prtcl)
+		if (flag_sgmii_aurora_prtcl)
 			QIXIS_WRITE(brdcfg[4], QIXIS_SRDS1CLK_125);
 
 		/* Steps For SerDes PLLs reset and reconfiguration after
 		 * changing SerDes's refclks
 		 */
-		for (i = 0; i < PLL_NUM; i++) {
+		for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) {
 			debug("For PLL%d reset and reconfiguration after"
 			       " changing refclks\n", i+1);
 			clrbits_be32(&srds_regs->bank[i].rstctl,
@@ -333,16 +581,101 @@ int config_serdes1_refclks(void)
 		printf("WARNING:IDT8T49N222A configuration not"
 			" supported for:%x SerDes1 Protocol.\n",
 			serdes1_prtcl);
-		return -1;
 	}
 
-	return 0;
+out:
+	/* Clearing SRDS_RST_MSK bit as now
+	 * SerDes reset event can cause a reset request
+	 */
+	clrbits_be32(&gur->rstrqmr1, FSL_CORENET_RSTRQMR1_SRDS_RST_MSK);
+	return ret;
+}
+
+int config_serdes2_refclks(void)
+{
+	ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	serdes_corenet_t *srds2_regs =
+		(void *)CONFIG_SYS_FSL_CORENET_SERDES2_ADDR;
+	u32 serdes2_prtcl;
+	int ret = 0;
+	int i;
+
+	serdes2_prtcl = in_be32(&gur->rcwsr[4]) &
+			FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+	if (!serdes2_prtcl) {
+		debug("SERDES2 is not enabled\n");
+		return -ENODEV;
+	}
+	serdes2_prtcl >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+	debug("Using SERDES2 Protocol: 0x%x:\n", serdes2_prtcl);
+
+	/* To prevent generation of reset request from SerDes
+	 * while changing the refclks, By setting SRDS_RST_MSK bit,
+	 * SerDes reset event cannot cause a reset request
+	 */
+	setbits_be32(&gur->rstrqmr1, FSL_CORENET_RSTRQMR1_SRDS_RST_MSK);
+
+	/* Reconfigure IDT idt8t49n222a device for PCIe SATA to work
+	 * For this SerDes2's Refclk1 need to be set to 100MHz
+	 */
+	switch (serdes2_prtcl) {
+	case 0x9E:
+	case 0x9A:
+	case 0xb2:
+		debug("Configuring IDT for PCIe SATA for srds_prctl:%x\n",
+			serdes2_prtcl);
+		ret = select_i2c_ch_pca(I2C_CH_IDT);
+		if (!ret) {
+			ret = set_serdes_refclk(IDT_SERDES2_ADDRESS, 2,
+					SERDES_REFCLK_100,
+					SERDES_REFCLK_156_25, 0);
+			if (ret) {
+				printf("IDT8T49N222A configuration failed.\n");
+				goto out;
+			} else
+				debug("IDT8T49N222A configured.\n");
+		} else {
+			goto out;
+		}
+		select_i2c_ch_pca(I2C_CH_DEFAULT);
+
+		/* Steps For SerDes PLLs reset and reconfiguration after
+		 * changing SerDes's refclks
+		 */
+		for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) {
+			clrbits_be32(&srds2_regs->bank[i].rstctl,
+					SRDS_RSTCTL_SDRST_B);
+			udelay(10);
+			clrbits_be32(&srds2_regs->bank[i].rstctl,
+				(SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B));
+			udelay(10);
+			setbits_be32(&srds2_regs->bank[i].rstctl,
+					SRDS_RSTCTL_RST);
+			setbits_be32(&srds2_regs->bank[i].rstctl,
+				(SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B
+				| SRDS_RSTCTL_SDRST_B));
+
+			udelay(10);
+		}
+		break;
+	default:
+		printf("IDT configuration not supported for:%x S2 Protocol.\n",
+			serdes2_prtcl);
+	}
+
+out:
+	/* Clearing SRDS_RST_MSK bit as now
+	 * SerDes reset event can cause a reset request
+	 */
+	clrbits_be32(&gur->rstrqmr1, FSL_CORENET_RSTRQMR1_SRDS_RST_MSK);
+	return ret;
 }
 
 int board_early_init_r(void)
 {
 	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
 	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+	int ret;
 
 	/*
 	 * Remap Boot flash + PROMJET region to caching-inhibited
@@ -375,6 +708,35 @@ int board_early_init_r(void)
 	else
 		printf("SerDes1 Refclks have been set.\n");
 
+	/* SerDes2 refclks need to be set again, as default clks
+	 * are not suitable for PCIe SATA to work
+	 * This function will set SerDes2's Refclk1 and refclk2
+	 * for SerDes2 protocols having PCIe in them
+	 * for PCIe SATA to work
+	 */
+	ret = config_serdes2_refclks();
+	if (!ret)
+		printf("SerDes2 Refclks have been set.\n");
+	else if (ret == -ENODEV)
+		printf("SerDes disable, Refclks couldn't change.\n");
+	else
+		printf("SerDes2 Refclk reconfiguring failed.\n");
+
+#if defined(CONFIG_SYS_FSL_ERRATUM_A006384) || \
+			defined(CONFIG_SYS_FSL_ERRATUM_A006475)
+	/* Rechecking the SerDes locks after all SerDes configurations
+	 * are done, As SerDes PLLs may not lock reliably at 5 G VCO
+	 * and at cold temperatures.
+	 * Following sequence ensure the proper locking of SerDes PLLs.
+	 */
+	if (SVR_MAJ(get_svr()) == 1) {
+		if (check_serdes_pll_locks())
+			printf("SerDes plls still not locked properly.\n");
+		else
+			printf("SerDes plls have been locked well.\n");
+	}
+#endif
+
 	/* Configure VSC3316 and VSC3308 crossbar switches */
 	if (configure_vsc3316_3308())
 		printf("VSC:failed to configure VSC3316/3308.\n");
diff --git a/board/freescale/b4860qds/b4860qds_crossbar_con.h b/board/freescale/b4860qds/b4860qds_crossbar_con.h
index db0cf28fff..fcccb8f9b3 100644
--- a/board/freescale/b4860qds/b4860qds_crossbar_con.h
+++ b/board/freescale/b4860qds/b4860qds_crossbar_con.h
@@ -24,6 +24,10 @@ static const int8_t vsc16_tx_4sfp_sgmii_34[8][2] = { {15, 7}, {0, 1},
 				{7, 8}, {9, 0}, {5, 14}, {4, 15},
 				{-1, -1}, {-1, -1} };
 
+static int8_t vsc16_tx_sfp_sgmii_aurora[8][2] = { {15, 7}, {0, 1},
+				{7, 8}, {9, 0}, {5, 14},
+				{4, 15}, {2, 12}, {12, 13} };
+
 #ifdef CONFIG_PPC_B4420
 static int8_t vsc16_tx_sgmii_lane_cd[8][2] = { {5, 14}, {4, 15},
 		{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
@@ -46,6 +50,10 @@ static const int8_t vsc16_rx_4sfp_sgmii_34[8][2] = { {8, 15}, {0, 1},
 				{7, 8}, {1, 9}, {14, 11}, {15, 10},
 				{-1, -1}, {-1, -1} };
 
+static int8_t vsc16_rx_sfp_sgmii_aurora[8][2] = { {8, 15}, {0, 1},
+				{7, 8}, {1, 9}, {14, 11},
+				{15, 10}, {13, 3}, {12, 12} };
+
 #ifdef CONFIG_PPC_B4420
 static int8_t vsc16_rx_sgmii_lane_cd[8][2] = { {14, 11}, {15, 10},
 		{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c
index a8fc845193..12df9a8d9f 100644
--- a/board/freescale/b4860qds/eth_b4860qds.c
+++ b/board/freescale/b4860qds/eth_b4860qds.c
@@ -66,6 +66,7 @@ static void initialize_lane_to_slot(void)
 			serdes2_prtcl);
 
 	switch (serdes2_prtcl) {
+	case 0x17:
 	case 0x18:
 		/*
 		 * Configuration:
@@ -198,6 +199,7 @@ int board_eth_init(bd_t *bis)
 	fm_info_set_phy_address(FM1_DTSEC6, CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
 
 	switch (serdes1_prtcl) {
+	case 0x29:
 	case 0x2a:
 		/* Serdes 1: A-B SGMII, Configuring DTSEC 5 and 6 */
 		debug("Setting phy addresses for FM1_DTSEC5: %x and"
@@ -209,6 +211,7 @@ int board_eth_init(bd_t *bis)
 				CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
 		break;
 #ifdef CONFIG_PPC_B4420
+	case 0x17:
 	case 0x18:
 		/* Serdes 1: A-D SGMII, Configuring on board dual SGMII Phy */
 		debug("Setting phy addresses for FM1_DTSEC3: %x and"
@@ -228,6 +231,7 @@ int board_eth_init(bd_t *bis)
 		break;
 	}
 	switch (serdes2_prtcl) {
+	case 0x17:
 	case 0x18:
 		debug("Setting phy addresses on SGMII Riser card for"
 				"FM1_DTSEC ports: \n");
@@ -240,6 +244,7 @@ int board_eth_init(bd_t *bis)
 		fm_info_set_phy_address(FM1_DTSEC4,
 				CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR);
 		break;
+	case 0x48:
 	case 0x49:
 		debug("Setting phy addresses on SGMII Riser card for"
 				"FM1_DTSEC ports: \n");
diff --git a/board/freescale/m5271evb/Makefile b/board/freescale/m5271evb/Makefile
deleted file mode 100644
index 77138c6073..0000000000
--- a/board/freescale/m5271evb/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= m5271evb.o
diff --git a/board/freescale/m5271evb/config.mk b/board/freescale/m5271evb/config.mk
deleted file mode 100644
index 957f584887..0000000000
--- a/board/freescale/m5271evb/config.mk
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-CONFIG_SYS_TEXT_BASE = 0xffe00000
diff --git a/board/freescale/m5271evb/m5271evb.c b/board/freescale/m5271evb/m5271evb.c
deleted file mode 100644
index 5981a2711a..0000000000
--- a/board/freescale/m5271evb/m5271evb.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/immap.h>
-
-int checkboard (void) {
-	puts ("Board: Freescale M5271EVB\n");
-	return 0;
-};
-
-phys_size_t initdram (int board_type) {
-
-	int i;
-
-	/* Enable Address lines 23-21 and lower 16bits of data path */
-	mbar_writeByte(MCF_GPIO_PAR_AD, MCF_GPIO_AD_ADDR23 |
-			MCF_GPIO_AD_ADDR22 | MCF_GPIO_AD_ADDR21 |
-			MCF_GPIO_AD_DATAL);
-
-	/* Set CS2 pin to be SD_CS0 */
-	mbar_writeByte(MCF_GPIO_PAR_CS, mbar_readByte(MCF_GPIO_PAR_CS)
-			| MCF_GPIO_PAR_CS_PAR_CS2);
-
-	/* Configure SDRAM Control Pin Assignemnt Register */
-	mbar_writeByte(MCF_GPIO_PAR_SDRAM, MCF_GPIO_SDRAM_CSSDCS_00 |
-			MCF_GPIO_SDRAM_SDWE | MCF_GPIO_SDRAM_SCAS |
-			MCF_GPIO_SDRAM_SRAS | MCF_GPIO_SDRAM_SCKE |
-			MCF_GPIO_SDRAM_SDCS_11);
-	asm(" nop");
-
-	/*
-	 * Check to see if the SDRAM has already been initialized
-	 * by a run control tool
-	 */
-	if (!(mbar_readLong(MCF_SDRAMC_DACR0) & MCF_SDRAMC_DACRn_RE)) {
-		/* Initialize DRAM Control Register: DCR */
-		mbar_writeShort(MCF_SDRAMC_DCR,
-				MCF_SDRAMC_DCR_RTIM(2)
-				| MCF_SDRAMC_DCR_RC(0x2E));
-		asm(" nop");
-
-		/*
-		 * Initialize DACR0
-		 *
-		 * CASL: 01
-		 * CBM: cmd at A20, bank select bits 21 and up
-		 * PS: 32bit port size
-		 */
-		mbar_writeLong(MCF_SDRAMC_DACR0,
-				MCF_SDRAMC_DACRn_BA(CONFIG_SYS_SDRAM_BASE>>18)
-				| MCF_SDRAMC_DACRn_CASL(1)
-				| MCF_SDRAMC_DACRn_CBM(3)
-				| MCF_SDRAMC_DACRn_PS(0));
-		asm(" nop");
-
-		/* Initialize DMR0 */
-		mbar_writeLong(MCF_SDRAMC_DMR0,
-				MCF_SDRAMC_DMRn_BAM_16M
-				| MCF_SDRAMC_DMRn_V);
-		asm(" nop");
-
-		/* Set IP bit in DACR */
-		mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
-				| MCF_SDRAMC_DACRn_IP);
-		asm(" nop");
-
-		/* Wait at least 20ns to allow banks to precharge */
-		for (i = 0; i < 5; i++)
-			asm(" nop");
-
-		/* Write to this block to initiate precharge */
-		*(u32 *)(CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5;
-		asm(" nop");
-
-		/* Set RE bit in DACR */
-		mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
-				| MCF_SDRAMC_DACRn_RE);
-
-		/* Wait for at least 8 auto refresh cycles to occur */
-		for (i = 0; i < 2000; i++)
-			asm(" nop");
-
-		/* Finish the configuration by issuing the MRS */
-		mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
-				| MCF_SDRAMC_DACRn_MRS);
-		asm(" nop");
-
-		/*
-		 * Write to the SDRAM Mode Register A0-A11 = 0x400
-		 *
-		 * Write Burst Mode = Programmed Burst Length
-		 * Op Mode = Standard Op
-		 * CAS Latency = 2
-		 * Burst Type = Sequential
-		 * Burst Length = 1
-		 */
-		*(u32 *)(CONFIG_SYS_SDRAM_BASE + 0x400) = 0xa5a5a5a5;
-		asm(" nop");
-	}
-
-	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-};
-
-int testdram (void) {
-
-	/* TODO: XXX XXX XXX */
-	printf ("DRAM test not implemented!\n");
-
-	return (0);
-}
diff --git a/board/freescale/m5271evb/u-boot.lds b/board/freescale/m5271evb/u-boot.lds
deleted file mode 100644
index 3defcd25c1..0000000000
--- a/board/freescale/m5271evb/u-boot.lds
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(m68k)
-
-SECTIONS
-{
-  .text      :
-  {
-    arch/m68k/cpu/mcf52x2/start.o		(.text*)
-
-    . = DEFINED(env_offset) ? env_offset : .;
-    common/env_embedded.o	(.ppcenv)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-
-  .reloc   :
-  {
-    __got_start = .;
-    KEEP(*(.got))
-    __got_end = .;
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)      :
-  {
-   _sbss = .;
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-   _ebss = .;
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/freescale/m54418twr/config.mk b/board/freescale/m54418twr/config.mk
index b306d031b9..07f52e0255 100644
--- a/board/freescale/m54418twr/config.mk
+++ b/board/freescale/m54418twr/config.mk
@@ -4,6 +4,4 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
 PLATFORM_CPPFLAGS += -DTEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
index c4962549a7..aadad3266f 100644
--- a/board/freescale/mx6slevk/mx6slevk.c
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -14,7 +14,7 @@
 #include <asm/gpio.h>
 #include <asm/imx-common/iomux-v3.h>
 #include <asm/io.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 #include <common.h>
 #include <fsl_esdhc.h>
 #include <mmc.h>
diff --git a/board/freescale/t1040qds/Makefile b/board/freescale/t1040qds/Makefile
index c7470d7cbb..19ed21b7df 100644
--- a/board/freescale/t1040qds/Makefile
+++ b/board/freescale/t1040qds/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_PCI)     += pci.o
 obj-y	+= law.o
 obj-y	+= tlb.o
 obj-y	+= eth.o
+obj-y	+= diu.o
diff --git a/board/freescale/t1040qds/diu.c b/board/freescale/t1040qds/diu.c
new file mode 100644
index 0000000000..ffd074b0f8
--- /dev/null
+++ b/board/freescale/t1040qds/diu.c
@@ -0,0 +1,215 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ * Author: Priyanka Jain <Priyanka.Jain@freescale.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <linux/ctype.h>
+#include <asm/io.h>
+#include <stdio_dev.h>
+#include <video_fb.h>
+#include <fsl_diu_fb.h>
+#include "../common/qixis.h"
+#include "t1040qds.h"
+#include "t1040qds_qixis.h"
+#include <i2c.h>
+
+
+#define I2C_DVI_INPUT_DATA_FORMAT_REG		0x1F
+#define I2C_DVI_PLL_CHARGE_CNTL_REG		0x33
+#define I2C_DVI_PLL_DIVIDER_REG			0x34
+#define I2C_DVI_PLL_SUPPLY_CNTL_REG		0x35
+#define I2C_DVI_PLL_FILTER_REG			0x36
+#define I2C_DVI_TEST_PATTERN_REG		0x48
+#define I2C_DVI_POWER_MGMT_REG			0x49
+#define I2C_DVI_LOCK_STATE_REG			0x4D
+#define I2C_DVI_SYNC_POLARITY_REG		0x56
+
+/*
+ * Set VSYNC/HSYNC to active high. This is polarity of sync signals
+ * from DIU->DVI. The DIU default is active igh, so DVI is set to
+ * active high.
+ */
+#define I2C_DVI_INPUT_DATA_FORMAT_VAL		0x98
+
+#define I2C_DVI_PLL_CHARGE_CNTL_HIGH_SPEED_VAL	0x06
+#define I2C_DVI_PLL_DIVIDER_HIGH_SPEED_VAL	0x26
+#define I2C_DVI_PLL_FILTER_HIGH_SPEED_VAL	0xA0
+#define I2C_DVI_PLL_CHARGE_CNTL_LOW_SPEED_VAL	0x08
+#define I2C_DVI_PLL_DIVIDER_LOW_SPEED_VAL	0x16
+#define I2C_DVI_PLL_FILTER_LOW_SPEED_VAL	0x60
+
+/* Clear test pattern */
+#define I2C_DVI_TEST_PATTERN_VAL		0x18
+/* Exit Power-down mode */
+#define I2C_DVI_POWER_MGMT_VAL			0xC0
+
+/* Monitor polarity is handled via DVI Sync Polarity Register */
+#define I2C_DVI_SYNC_POLARITY_VAL		0x00
+
+/*
+ * DIU Area Descriptor
+ *
+ * Note that we need to byte-swap the value before it's written to the AD
+ * register.  So even though the registers don't look like they're in the same
+ * bit positions as they are on the MPC8610, the same value is written to the
+ * AD register on the MPC8610 and on the P1022.
+ */
+#define AD_BYTE_F		0x10000000
+#define AD_ALPHA_C_SHIFT	25
+#define AD_BLUE_C_SHIFT		23
+#define AD_GREEN_C_SHIFT	21
+#define AD_RED_C_SHIFT		19
+#define AD_PIXEL_S_SHIFT	16
+#define AD_COMP_3_SHIFT		12
+#define AD_COMP_2_SHIFT		8
+#define AD_COMP_1_SHIFT		4
+#define AD_COMP_0_SHIFT		0
+
+/* Programming of HDMI Chrontel CH7301 connector */
+int diu_set_dvi_encoder(unsigned int pixclock)
+{
+	int ret;
+	u8 temp;
+	select_i2c_ch_pca9547(I2C_MUX_CH_DIU);
+
+	temp = I2C_DVI_TEST_PATTERN_VAL;
+	ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_TEST_PATTERN_REG, 1,
+			&temp, 1);
+	if (ret) {
+		puts("I2C: failed to select proper dvi test pattern\n");
+		return ret;
+	}
+	temp = I2C_DVI_INPUT_DATA_FORMAT_VAL;
+	ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_INPUT_DATA_FORMAT_REG,
+			1, &temp, 1);
+	if (ret) {
+		puts("I2C: failed to select dvi input data format\n");
+		return ret;
+	}
+
+	/* Set Sync polarity register */
+	temp = I2C_DVI_SYNC_POLARITY_VAL;
+	ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_SYNC_POLARITY_REG, 1,
+			&temp, 1);
+	if (ret) {
+		puts("I2C: failed to select dvi syc polarity\n");
+		return ret;
+	}
+
+	/* Set PLL registers based on pixel clock rate*/
+	if (pixclock > 65000000) {
+		temp = I2C_DVI_PLL_CHARGE_CNTL_HIGH_SPEED_VAL;
+		ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR,
+				I2C_DVI_PLL_CHARGE_CNTL_REG, 1,	&temp, 1);
+		if (ret) {
+			puts("I2C: failed to select dvi pll charge_cntl\n");
+			return ret;
+		}
+		temp = I2C_DVI_PLL_DIVIDER_HIGH_SPEED_VAL;
+		ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR,
+				I2C_DVI_PLL_DIVIDER_REG, 1, &temp, 1);
+		if (ret) {
+			puts("I2C: failed to select dvi pll divider\n");
+			return ret;
+		}
+		temp = I2C_DVI_PLL_FILTER_HIGH_SPEED_VAL;
+		ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR,
+				I2C_DVI_PLL_FILTER_REG, 1, &temp, 1);
+		if (ret) {
+			puts("I2C: failed to select dvi pll filter\n");
+			return ret;
+		}
+	} else {
+		temp = I2C_DVI_PLL_CHARGE_CNTL_LOW_SPEED_VAL;
+		ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR,
+				I2C_DVI_PLL_CHARGE_CNTL_REG, 1, &temp, 1);
+		if (ret) {
+			puts("I2C: failed to select dvi pll charge_cntl\n");
+			return ret;
+		}
+		temp = I2C_DVI_PLL_DIVIDER_LOW_SPEED_VAL;
+		ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR,
+				I2C_DVI_PLL_DIVIDER_REG, 1, &temp, 1);
+		if (ret) {
+			puts("I2C: failed to select dvi pll divider\n");
+			return ret;
+		}
+		temp = I2C_DVI_PLL_FILTER_LOW_SPEED_VAL;
+		ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR,
+				I2C_DVI_PLL_FILTER_REG, 1, &temp, 1);
+		if (ret) {
+			puts("I2C: failed to select dvi pll filter\n");
+			return ret;
+		}
+	}
+
+	temp = I2C_DVI_POWER_MGMT_VAL;
+	ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_POWER_MGMT_REG, 1,
+			&temp, 1);
+	if (ret) {
+		puts("I2C: failed to select dvi power mgmt\n");
+		return ret;
+	}
+
+	udelay(500);
+
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	return 0;
+}
+
+void diu_set_pixel_clock(unsigned int pixclock)
+{
+	unsigned long speed_ccb, temp;
+	u32 pixval;
+	int ret = 0;
+	speed_ccb = get_bus_freq(0);
+	temp = 1000000000 / pixclock;
+	temp *= 1000;
+	pixval = speed_ccb / temp;
+
+	/* Program HDMI encoder */
+	ret = diu_set_dvi_encoder(temp);
+	if (ret) {
+		puts("Failed to set DVI encoder\n");
+		return;
+	}
+
+	/* Program pixel clock */
+	out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR,
+		 ((pixval << PXCK_BITS_START) & PXCK_MASK));
+	/* enable clock*/
+	out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR, PXCKEN_MASK |
+		 ((pixval << PXCK_BITS_START) & PXCK_MASK));
+}
+
+int platform_diu_init(unsigned int xres, unsigned int yres, const char *port)
+{
+	u32 pixel_format;
+	u8 sw;
+
+	/*Route I2C4 to DIU system as HSYNC/VSYNC*/
+	sw = QIXIS_READ(brdcfg[5]);
+	QIXIS_WRITE(brdcfg[5],
+		    ((sw & ~(BRDCFG5_IMX_MASK)) | (BRDCFG5_IMX_DIU)));
+
+	/*Configure Display ouput port as HDMI*/
+	sw = QIXIS_READ(brdcfg[15]);
+	QIXIS_WRITE(brdcfg[15],
+		    ((sw & ~(BRDCFG15_LCDPD_MASK | BRDCFG15_DIUSEL_MASK))
+		      | (BRDCFG15_LCDPD_ENABLED | BRDCFG15_DIUSEL_HDMI)));
+
+	pixel_format = cpu_to_le32(AD_BYTE_F | (3 << AD_ALPHA_C_SHIFT) |
+		(0 << AD_BLUE_C_SHIFT) | (1 << AD_GREEN_C_SHIFT) |
+		(2 << AD_RED_C_SHIFT) | (8 << AD_COMP_3_SHIFT) |
+		(8 << AD_COMP_2_SHIFT) | (8 << AD_COMP_1_SHIFT) |
+		(8 << AD_COMP_0_SHIFT) | (3 << AD_PIXEL_S_SHIFT));
+
+	printf("DIU:   Switching to monitor @ %ux%u\n",  xres, yres);
+
+
+	return fsl_diu_init(xres, yres, pixel_format, 0);
+}
diff --git a/board/freescale/t1040qds/t1040qds.h b/board/freescale/t1040qds/t1040qds.h
index 79bdedaff3..5041f379de 100644
--- a/board/freescale/t1040qds/t1040qds.h
+++ b/board/freescale/t1040qds/t1040qds.h
@@ -9,5 +9,6 @@
 
 void fdt_fixup_board_enet(void *blob);
 void pci_of_setup(void *blob, bd_t *bd);
+int select_i2c_ch_pca9547(u8 ch);
 
 #endif
diff --git a/board/freescale/t1040qds/t1040qds_qixis.h b/board/freescale/t1040qds/t1040qds_qixis.h
index 2ce87959b5..98d2d39e6d 100644
--- a/board/freescale/t1040qds/t1040qds_qixis.h
+++ b/board/freescale/t1040qds/t1040qds_qixis.h
@@ -13,6 +13,18 @@
 #define BRDCFG4_EMISEL_MASK		0xE0
 #define BRDCFG4_EMISEL_SHIFT		5
 
+/* BRDCFG5[0:1] controls routing and use of I2C3 & I2C4 ports*/
+#define BRDCFG5_IMX_MASK		0xC0
+#define BRDCFG5_IMX_DIU			0x80
+
+/* BRDCFG15[3] controls LCD Panel Powerdown*/
+#define BRDCFG15_LCDPD_MASK		0x10
+#define BRDCFG15_LCDPD_ENABLED		0x00
+
+/* BRDCFG15[6:7] controls DIU MUX selction*/
+#define BRDCFG15_DIUSEL_MASK		0x03
+#define BRDCFG15_DIUSEL_HDMI		0x00
+
 /* SYSCLK */
 #define QIXIS_SYSCLK_66			0x0
 #define QIXIS_SYSCLK_83			0x1
diff --git a/board/freescale/t104xrdb/ddr.c b/board/freescale/t104xrdb/ddr.c
index 9009afa3ad..57d0f9cfd8 100644
--- a/board/freescale/t104xrdb/ddr.c
+++ b/board/freescale/t104xrdb/ddr.c
@@ -46,7 +46,7 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 
 	pbsp = udimms[0];
 
-	/* Get clk_adjust, cpo, write_data_delay,2t, according to the board ddr
+	/* Get clk_adjust according to the board ddr
 	 * freqency and n_banks specified in board_specific_parameters table.
 	 */
 	ddr_freq = get_ddr_freq(0) / 1000000;
@@ -54,14 +54,10 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 		if (pbsp->n_ranks == pdimm->n_ranks &&
 		    (pdimm->rank_density >> 30) >= pbsp->rank_gb) {
 			if (ddr_freq <= pbsp->datarate_mhz_high) {
-				popts->cpo_override = pbsp->cpo;
-				popts->write_data_delay =
-					pbsp->write_data_delay;
 				popts->clk_adjust = pbsp->clk_adjust;
 				popts->wrlvl_start = pbsp->wrlvl_start;
 				popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
 				popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
-				popts->twot_en = pbsp->force_2t;
 				goto found;
 			}
 			pbsp_highest = pbsp;
@@ -74,13 +70,10 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 		printf("for data rate %lu MT/s\n", ddr_freq);
 		printf("Trying to use the highest speed (%u) parameters\n",
 		       pbsp_highest->datarate_mhz_high);
-		popts->cpo_override = pbsp_highest->cpo;
-		popts->write_data_delay = pbsp_highest->write_data_delay;
 		popts->clk_adjust = pbsp_highest->clk_adjust;
 		popts->wrlvl_start = pbsp_highest->wrlvl_start;
 		popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
 		popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
-		popts->twot_en = pbsp_highest->force_2t;
 	} else {
 		panic("DIMM is not supported by this board");
 	}
@@ -112,8 +105,8 @@ found:
 	popts->zq_en = 1;
 
 	/* DHC_EN =1, ODT = 75 Ohm */
-	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
-	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_OFF);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_OFF);
 }
 
 phys_size_t initdram(int board_type)
diff --git a/board/freescale/t104xrdb/ddr.h b/board/freescale/t104xrdb/ddr.h
index 9276b596ac..09b30b9aac 100644
--- a/board/freescale/t104xrdb/ddr.h
+++ b/board/freescale/t104xrdb/ddr.h
@@ -6,7 +6,6 @@
 
 #ifndef __DDR_H__
 #define __DDR_H__
-
 dimm_params_t ddr_raw_timing = {
 	.n_ranks = 2,
 	.rank_density = 2147483648u,
@@ -14,22 +13,21 @@ dimm_params_t ddr_raw_timing = {
 	.primary_sdram_width = 64,
 	.ec_sdram_width = 8,
 	.registered_dimm = 0,
-	.mirrored_dimm = 1,
+	.mirrored_dimm = 0,
 	.n_row_addr = 15,
 	.n_col_addr = 10,
 	.n_banks_per_sdram_device = 8,
 	.edc_config = 2,	/* ECC */
 	.burst_lengths_bitmask = 0x0c,
-
 	.tckmin_x_ps = 1071,
-	.caslat_x = 0x2fe << 4,	/* 5,6,7,8,9,10,11,13 */
-	.taa_ps = 13910,
+	.caslat_x = 0xfe << 4,	/* 5,6,7,8,9,10,11 */
+	.taa_ps = 13125,
 	.twr_ps = 15000,
-	.trcd_ps = 13910,
+	.trcd_ps = 13125,
 	.trrd_ps = 6000,
-	.trp_ps = 13910,
+	.trp_ps = 13125,
 	.tras_ps = 34000,
-	.trc_ps = 48910,
+	.trc_ps = 48125,
 	.trfc_ps = 260000,
 	.twtr_ps = 7500,
 	.trtp_ps = 7500,
@@ -45,9 +43,6 @@ struct board_specific_parameters {
 	u32 wrlvl_start;
 	u32 wrlvl_ctl_2;
 	u32 wrlvl_ctl_3;
-	u32 cpo;
-	u32 write_data_delay;
-	u32 force_2t;
 };
 
 /*
@@ -59,14 +54,21 @@ struct board_specific_parameters {
 static const struct board_specific_parameters udimm0[] = {
 	/*
 	 * memory controller 0
-	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
-	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl
+	 * ranks| mhz| GB  |adjst| start |   ctl2
 	 */
-	{2,  1066, 4, 8,     4, 0x05070609, 0x08090a08,   0xff,    2,  0},
-	{2,  1350, 4, 4,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
-	{2,  1350, 0, 5,     7, 0x0709090b, 0x0c0c0d09,   0xff,    2,  0},
-	{2,  1666, 4, 4,     8, 0x080a0a0d, 0x0d10100b,   0xff,    2,  0},
-	{2,  1666, 0, 5,     7, 0x080a0a0c, 0x0d0d0e0a,   0xff,    2,  0},
+	{2,  833,  4, 4,     6, 0x06060607, 0x08080807},
+	{2,  833,  0, 4,     6, 0x06060607, 0x08080807},
+	{2,  1350, 4, 4,     7, 0x0708080A, 0x0A0B0C09},
+	{2,  1350, 0, 4,     7, 0x0708080A, 0x0A0B0C09},
+	{2,  1666, 4, 4,     7, 0x0808090B, 0x0C0D0E0A},
+	{2,  1666, 0, 4,     7, 0x0808090B, 0x0C0D0E0A},
+	{1,  833,  4, 4,     6, 0x06060607, 0x08080807},
+	{1,  833,  0, 4,     6, 0x06060607, 0x08080807},
+	{1,  1350, 4, 4,     7, 0x0708080A, 0x0A0B0C09},
+	{1,  1350, 0, 4,     7, 0x0708080A, 0x0A0B0C09},
+	{1,  1666, 4, 4,     7, 0x0808090B, 0x0C0D0E0A},
+	{1,  1666, 0, 4,     7, 0x0808090B, 0x0C0D0E0A},
 	{}
 };
 
diff --git a/board/freescale/t208xqds/eth_t208xqds.c b/board/freescale/t208xqds/eth_t208xqds.c
index 7d8411bef7..d7a804d22a 100644
--- a/board/freescale/t208xqds/eth_t208xqds.c
+++ b/board/freescale/t208xqds/eth_t208xqds.c
@@ -36,14 +36,15 @@
 #define EMI1_SLOT3	3
 #define EMI1_SLOT4	4
 #define EMI1_SLOT5	5
+#define EMI2            7
 #elif defined(CONFIG_T2081QDS)
 #define EMI1_SLOT2      3
 #define EMI1_SLOT3      4
 #define EMI1_SLOT5      5
 #define EMI1_SLOT6      6
 #define EMI1_SLOT7      7
-#endif
 #define EMI2		8
+#endif
 
 static int mdio_mux[NUM_FM_PORTS];
 
diff --git a/board/freescale/t208xrdb/Makefile b/board/freescale/t208xrdb/Makefile
new file mode 100644
index 0000000000..092c9ff0dc
--- /dev/null
+++ b/board/freescale/t208xrdb/Makefile
@@ -0,0 +1,13 @@
+#
+# Copyright 2014 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-$(CONFIG_T2080RDB) += t208xrdb.o
+obj-$(CONFIG_T2080RDB) += eth_t208xrdb.o
+obj-$(CONFIG_T2080RDB) += cpld.o
+obj-$(CONFIG_PCI)      += pci.o
+obj-y   += ddr.o
+obj-y   += law.o
+obj-y   += tlb.o
diff --git a/board/freescale/t208xrdb/README b/board/freescale/t208xrdb/README
new file mode 100644
index 0000000000..0012c6cb40
--- /dev/null
+++ b/board/freescale/t208xrdb/README
@@ -0,0 +1,208 @@
+T2080PCIe-RDB is a Freescale Reference Design Board that hosts the T2080 SoC.
+It can work in two mode: standalone mode and PCIe endpoint mode.
+
+T2080 SoC Overview
+------------------
+The T2080 QorIQ multicore processor combines four dual-threaded e6500 Power
+Architecture processor cores with high-performance datapath acceleration
+logic and network and peripheral bus interfaces required for networking,
+telecom/datacom, wireless infrastructure, and mil/aerospace applications.
+
+T2080 includes the following functions and features:
+ - Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz
+ - 2MB L2 cache and 512KB CoreNet platform cache (CPC)
+ - Hierarchical interconnect fabric
+ - One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
+ - Data Path Acceleration Architecture (DPAA) incorporating acceleration
+ - 16 SerDes lanes up to 10.3125 GHz
+ - 8 Ethernet interfaces, supporting combinations of the following:
+   - Up to four 10 Gbps Ethernet MACs
+   - Up to eight 1 Gbps Ethernet MACs
+   - Up to four 2.5 Gbps Ethernet MACs
+ - High-speed peripheral interfaces
+   - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
+   - Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz
+ - Additional peripheral interfaces
+   - Two serial ATA (SATA 2.0) controllers
+   - Two high-speed USB 2.0 controllers with integrated PHY
+   - Enhanced secure digital host controller (SD/SDHC/SDXC/eMMC)
+   - Enhanced serial peripheral interface (eSPI)
+   - Four I2C controllers
+   - Four 2-pin UARTs or two 4-pin UARTs
+   - Integrated Flash Controller supporting NAND and NOR flash
+ - Three eight-channel DMA engines
+ - Support for hardware virtualization and partitioning enforcement
+ - QorIQ Platform's Trust Architecture 2.0
+
+Differences between T2080 and T2081
+-----------------------------------
+  Feature		T2080	 T2081
+  1G Ethernet numbers:  8	 6
+  10G Ethernet numbers: 4	 2
+  SerDes lanes:		16	 8
+  Serial RapidIO,RMan:  2	 no
+  SATA Controller:	2	 no
+  Aurora:		yes	 no
+  SoC Package:		896-pins 780-pins
+
+
+T2080PCIe-RDB board Overview
+----------------------------
+ - SERDES Configuration
+     - SerDes-1 Lane A-B: to two 10G XFI fiber (MAC9 & MAC10)
+     - SerDes-1 Lane C-D: to two 10G Base-T (MAC1 & MAC2)
+     - SerDes-1 Lane E-H: to PCIe Goldfinger (PCIe4 x4, Gen3)
+     - SerDes-2 Lane A-D: to PCIe Slot (PCIe1 x4, Gen2)
+     - SerDes-2 Lane E-F: to C293 secure co-processor (PCIe2 x2)
+     - SerDes-2 Lane G-H: to SATA1 & SATA2
+ - Ethernet
+     - Two on-board 10M/100M/1G RGMII ethernet ports
+     - Two on-board 10Gbps XFI fiber ports
+     - Two on-board 10Gbps Base-T copper ports
+ - DDR Memory
+     - Supports 72bit 4GB DDR3-LP SODIMM
+ - PCIe
+     - One PCIe x4 gold-finger
+     - One PCIe x4 connector
+     - One PCIe x2 end-point device (C293 Crypto co-processor)
+ - IFC/Local Bus
+     - NOR:  128MB 16-bit NOR Flash
+     - NAND: 512MB 8-bit NAND flash
+     - CPLD: for system controlling with programable header on-board
+ - SATA
+     - Two SATA 2.0 onnectors on-board
+ - USB
+     - Supports two USB 2.0 ports with integrated PHYs
+     - Two type A ports with 5V@1.5A per port.
+ - SDHC
+     - one TF-card connector on-board
+ - SPI
+     -  On-board 64MB SPI flash
+ - Other
+     - Two Serial ports
+     - Four I2C ports
+
+
+System Memory map
+-----------------
+Start Address  End Address      Description			Size
+0xF_FFDF_0000  0xF_FFDF_0FFF    IFC - CPLD			4KB
+0xF_FF80_0000  0xF_FF80_FFFF    IFC - NAND Flash		64KB
+0xF_FE00_0000  0xF_FEFF_FFFF    CCSRBAR				16MB
+0xF_F803_0000  0xF_F803_FFFF    PCI Express 4 I/O Space		64KB
+0xF_F802_0000  0xF_F802_FFFF    PCI Express 3 I/O Space		64KB
+0xF_F801_0000  0xF_F801_FFFF    PCI Express 2 I/O Space		64KB
+0xF_F800_0000  0xF_F800_FFFF    PCI Express 1 I/O Space		64KB
+0xF_F600_0000  0xF_F7FF_FFFF    Queue manager software portal	32MB
+0xF_F400_0000  0xF_F5FF_FFFF    Buffer manager software portal	32MB
+0xF_E800_0000  0xF_EFFF_FFFF    IFC - NOR Flash			128MB
+0xF_0000_0000  0xF_003F_FFFF    DCSR				4MB
+0xC_4000_0000  0xC_4FFF_FFFF    PCI Express 4 Mem Space		256MB
+0xC_3000_0000  0xC_3FFF_FFFF    PCI Express 3 Mem Space		256MB
+0xC_2000_0000  0xC_2FFF_FFFF    PCI Express 2 Mem Space		256MB
+0xC_0000_0000  0xC_1FFF_FFFF    PCI Express 1 Mem Space		512MB
+0x0_0000_0000  0x0_ffff_ffff    DDR				4GB
+
+
+128M NOR Flash memory Map
+-------------------------
+Start Address   End Address	Definition			Max size
+0xEFF40000	0xEFFFFFFF	u-boot (current bank)		768KB
+0xEFF20000	0xEFF3FFFF	u-boot env (current bank)	128KB
+0xEFF00000	0xEFF1FFFF	FMAN Ucode (current bank)	128KB
+0xEFE00000	0xEFE3FFFF	PHY CS4315 firmware		256KB
+0xED300000	0xEFEFFFFF	rootfs (alt bank)		44MB
+0xEC800000	0xEC8FFFFF	Hardware device tree (alt bank)	1MB
+0xEC020000	0xEC7FFFFF	Linux.uImage (alt bank)		7MB + 875KB
+0xEC000000	0xEC01FFFF	RCW (alt bank)			128KB
+0xEBF40000	0xEBFFFFFF	u-boot (alt bank)		768KB
+0xEBF20000	0xEBF3FFFF	u-boot env (alt bank)		128KB
+0xEBF00000	0xEBF1FFFF	FMAN ucode (alt bank)		128KB
+0xEBE00000	0xEBE3FFFF	PHY CS4315 firmware (alt bank)	256KB
+0xE9300000	0xEBEFFFFF	rootfs (current bank)		44MB
+0xE8800000	0xE88FFFFF	Hardware device tree (cur bank)	11MB + 512KB
+0xE8020000	0xE86FFFFF	Linux.uImage (current bank)	7MB + 875KB
+0xE8000000	0xE801FFFF	RCW (current bank)		128KB
+
+
+T2080PCIe-RDB Ethernet Port Map
+-------------------------------
+Label    In Uboot      In Linux     FMan Address   Comments    PHY
+ETH0     FM1@GTEC1     fm1-mac9     0xfe4f0000     10G SFP+   (CS4315)
+ETH1     FM1@GTEC2     fm1-mac10    0xfe4f2000     10G SFP+   (CS4315)
+ETH2     FM1@GTEC3     fm1-mac1     0xfe4e0000     10G Base-T (AQ1202)
+ETH3     FM1@GTEC4     fm1-mac2     0xfe4e2000     10G Base-T (AQ1202)
+ETH4     FM1@DTSEC3    fm1-mac3     0xfe4e4000     1G  RGMII  (RTL8211E)
+ETH5     FM1@DTSEC4    fm1-mac4     0xfe4e6000     1G  RGMII  (RTL8211E)
+
+
+T2080PCIe-RDB Default DIP-Switch setting
+----------------------------------------
+SW1[1:8] = '00010011'
+SW2[1:8] = '10111111'
+SW3[1:8] = '11100001'
+
+Software configurations and board settings
+------------------------------------------
+1. NOR boot:
+   a. build NOR boot image
+	$ make T2080RDB
+   b. program u-boot.bin image to NOR flash
+	=> tftp 1000000 u-boot.bin
+	=> pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize
+	set SW1[1:8] = '00010011', SW2[1] = '1', SW3[4] = '0' for NOR boot
+
+   Switching between default bank and alternate bank on NOR flash
+   To change boot source to vbank4:
+	via software:   run command 'cpld reset altbank' in u-boot.
+	via DIP-switch: set SW3[5:7] = '011'
+
+   To change boot source to vbank0:
+	via software:   run command 'cpld reset' in u-boot.
+	via DIP-Switch: set SW3[5:7] = '111'
+
+2. NAND Boot:
+   a. build PBL image for NAND boot
+	$ make T2080RDB_NAND_config
+	$ make u-boot.pbl
+   b. program u-boot.pbl to NAND flash
+	=> tftp 1000000 u-boot.pbl
+	=> nand erase 0 d0000
+	=> nand write 1000000 0 $filesize
+	set SW1[1:8] = '10000010', SW2[1] = '1', SW3[4] = '1' for NAND boot
+
+3. SPI Boot:
+   a. build PBL image for SPI boot
+	$ make T2080RDB_SPIFLASH_config
+	$ make u-boot.pbl
+   b. program u-boot.pbl to SPI flash
+	=> tftp 1000000 u-boot.pbl
+	=> sf probe 0
+	=> sf erase 0 d0000
+	=> sf write 1000000 0 $filesize
+	set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot
+
+4. SD Boot:
+   a. build PBL image for SD boot
+	$ make T2080RDB_SDCARD_config
+	$ make u-boot.pbl
+   b. program u-boot.pbl to TF card
+	=> tftp 1000000 u-boot.pbl
+	=> mmc write 1000000 8 1650
+	set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot
+
+
+How to update the ucode of Cortina CS4315/CS4340 10G PHY
+--------------------------------------------------------
+=> tftp 1000000 CS4315-CS4340-PHY-ucode.txt
+=> pro off all;era 0xefe00000 0xefefffff;cp.b 1000000 0xefe00000 $filesize
+
+
+How to update the ucode of Freescale FMAN
+-----------------------------------------
+=> tftp 1000000 fsl_fman_ucode_t2080_r1.0.bin
+=> pro off all;erase 0xeff00000 0xeff1ffff;cp 1000000 0xeff00000 $filesize
+
+
+For more details, please refer to T2080PCIe-RDB User Guide and access
+website www.freescale.com and Freescale QorIQ SDK Infocenter document.
diff --git a/board/freescale/t208xrdb/cpld.c b/board/freescale/t208xrdb/cpld.c
new file mode 100644
index 0000000000..4aa126be54
--- /dev/null
+++ b/board/freescale/t208xrdb/cpld.c
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2014 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Freescale T2080RDB board-specific CPLD controlling supports.
+ */
+
+#include <common.h>
+#include <command.h>
+#include "cpld.h"
+
+u8 cpld_read(unsigned int reg)
+{
+	void *p = (void *)CONFIG_SYS_CPLD_BASE;
+
+	return in_8(p + reg);
+}
+
+void cpld_write(unsigned int reg, u8 value)
+{
+	void *p = (void *)CONFIG_SYS_CPLD_BASE;
+
+	out_8(p + reg, value);
+}
+
+/* Set the boot bank to the alternate bank */
+void cpld_set_altbank(void)
+{
+	u8 reg = CPLD_READ(flash_csr);
+
+	reg = (reg & ~CPLD_BANK_SEL_MASK) | CPLD_LBMAP_ALTBANK;
+	CPLD_WRITE(flash_csr, reg);
+	CPLD_WRITE(reset_ctl, CPLD_LBMAP_RESET);
+}
+
+/* Set the boot bank to the default bank */
+void cpld_set_defbank(void)
+{
+	u8 reg = CPLD_READ(flash_csr);
+
+	reg = (reg & ~CPLD_BANK_SEL_MASK) | CPLD_LBMAP_DFLTBANK;
+	CPLD_WRITE(flash_csr, reg);
+	CPLD_WRITE(reset_ctl, CPLD_LBMAP_RESET);
+}
+
+int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	int rc = 0;
+
+	if (argc <= 1)
+		return cmd_usage(cmdtp);
+
+	if (strcmp(argv[1], "reset") == 0) {
+		if (strcmp(argv[2], "altbank") == 0)
+			cpld_set_altbank();
+		else
+			cpld_set_defbank();
+	} else {
+		rc = cmd_usage(cmdtp);
+	}
+
+	return rc;
+}
+
+U_BOOT_CMD(
+	cpld, CONFIG_SYS_MAXARGS, 1, do_cpld,
+	"Reset the board or alternate bank",
+	"reset: reset to default bank\n"
+	"cpld reset altbank: reset to alternate bank\n"
+);
diff --git a/board/freescale/t208xrdb/cpld.h b/board/freescale/t208xrdb/cpld.h
new file mode 100644
index 0000000000..4cee4e55cf
--- /dev/null
+++ b/board/freescale/t208xrdb/cpld.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2014 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * CPLD register set of T2080RDB board-specific.
+ */
+struct cpld_data {
+	u8 chip_id1;		/* 0x00 - Chip ID1 register */
+	u8 chip_id2;		/* 0x01 - Chip ID2 register */
+	u8 hw_ver;		/* 0x02 - Hardware Revision Register */
+	u8 sw_ver;		/* 0x03 - Software Revision register */
+	u8 res0[12];		/* 0x04 - 0x0F - not used */
+	u8 reset_ctl;		/* 0x10 - Reset control Register */
+	u8 flash_csr;		/* 0x11 - Flash control and status register */
+	u8 thermal_csr;		/* 0x12 - Thermal control and status register */
+	u8 led_csr;		/* 0x13 - LED control and status register */
+	u8 sfp_csr;		/* 0x14 - SFP+ control and status register */
+	u8 misc_csr;		/* 0x15 - Misc control and status register */
+	u8 boot_or;		/* 0x16 - Boot config override register */
+	u8 boot_cfg1;		/* 0x17 - Boot configuration register 1 */
+	u8 boot_cfg2;		/* 0x18 - Boot configuration register 2 */
+} cpld_data_t;
+
+u8 cpld_read(unsigned int reg);
+void cpld_write(unsigned int reg, u8 value);
+
+#define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg))
+#define CPLD_WRITE(reg, value)  \
+	cpld_write(offsetof(struct cpld_data, reg), value)
+
+/* CPLD on IFC */
+#define CPLD_LBMAP_MASK		0x3F
+#define CPLD_BANK_SEL_MASK	0x07
+#define CPLD_BANK_OVERRIDE	0x40
+#define CPLD_LBMAP_ALTBANK	0x43 /* BANK OR | BANK 4 */
+#define CPLD_LBMAP_DFLTBANK	0x47 /* BANK OR | BANK 0 */
+#define CPLD_LBMAP_RESET	0xFF
+#define CPLD_LBMAP_SHIFT	0x03
+#define CPLD_BOOT_SEL		0x80
diff --git a/board/freescale/t208xrdb/ddr.c b/board/freescale/t208xrdb/ddr.c
new file mode 100644
index 0000000000..01e917398f
--- /dev/null
+++ b/board/freescale/t208xrdb/ddr.c
@@ -0,0 +1,112 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 or later as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <hwconfig.h>
+#include <asm/mmu.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+#include <asm/fsl_law.h>
+#include "ddr.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
+{
+	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+	ulong ddr_freq;
+
+	if (ctrl_num > 1) {
+		printf("Not supported controller number %d\n", ctrl_num);
+		return;
+	}
+	if (!pdimm->n_ranks)
+		return;
+
+	pbsp = udimms[0];
+
+	/* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
+	 * freqency and n_banks specified in board_specific_parameters table.
+	 */
+	ddr_freq = get_ddr_freq(0) / 1000000;
+	while (pbsp->datarate_mhz_high) {
+		if (pbsp->n_ranks == pdimm->n_ranks &&
+		    (pdimm->rank_density >> 30) >= pbsp->rank_gb) {
+			if (ddr_freq <= pbsp->datarate_mhz_high) {
+				popts->clk_adjust = pbsp->clk_adjust;
+				popts->wrlvl_start = pbsp->wrlvl_start;
+				popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+				popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+				goto found;
+			}
+			pbsp_highest = pbsp;
+		}
+		pbsp++;
+	}
+
+	if (pbsp_highest) {
+		printf("Error: board specific timing not found");
+		printf("for data rate %lu MT/s\n", ddr_freq);
+		printf("Trying to use the highest speed (%u) parameters\n",
+		       pbsp_highest->datarate_mhz_high);
+		popts->clk_adjust = pbsp_highest->clk_adjust;
+		popts->wrlvl_start = pbsp_highest->wrlvl_start;
+		popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+		popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+	} else {
+		panic("DIMM is not supported by this board");
+	}
+found:
+	debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
+		"\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, "
+		"wrlvl_ctrl_3 0x%x\n",
+		pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
+		pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
+		pbsp->wrlvl_ctl_3);
+
+	/*
+	 * Factors to consider for half-strength driver enable:
+	 *	- number of DIMMs installed
+	 */
+	popts->half_strength_driver_enable = 0;
+	/*
+	 * Write leveling override
+	 */
+	popts->wrlvl_override = 1;
+	popts->wrlvl_sample = 0xf;
+
+	/*
+	 * Rtt and Rtt_WR override
+	 */
+	popts->rtt_override = 0;
+
+	/* Enable ZQ calibration */
+	popts->zq_en = 1;
+
+	/* DHC_EN =1, ODT = 75 Ohm */
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
+}
+
+phys_size_t initdram(int board_type)
+{
+	phys_size_t dram_size;
+
+	puts("Initializing....using SPD\n");
+
+	dram_size = fsl_ddr_sdram();
+
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
+
+	puts("    DDR: ");
+	return dram_size;
+}
diff --git a/board/freescale/t208xrdb/ddr.h b/board/freescale/t208xrdb/ddr.h
new file mode 100644
index 0000000000..b6d406219e
--- /dev/null
+++ b/board/freescale/t208xrdb/ddr.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef __DDR_H__
+#define __DDR_H__
+struct board_specific_parameters {
+	u32 n_ranks;
+	u32 datarate_mhz_high;
+	u32 rank_gb;
+	u32 clk_adjust;
+	u32 wrlvl_start;
+	u32 wrlvl_ctl_2;
+	u32 wrlvl_ctl_3;
+};
+
+/*
+ * These tables contain all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+
+static const struct board_specific_parameters udimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl |
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |
+	 */
+	{2,  1200, 2, 5,     7, 0x0808090a, 0x0b0c0c0a},
+	{2,  1500, 2, 5,     6, 0x07070809, 0x0a0b0b09},
+	{2,  1600, 2, 5,     8, 0x0808070b, 0x0c0d0e0a},
+	{2,  1700, 2, 4,     7, 0x080a0a0c, 0x0c0d0e0a},
+	{2,  1900, 2, 5,     9, 0x0a0b0c0e, 0x0f10120c},
+	{1,  1200, 2, 5,     7, 0x0808090a, 0x0b0c0c0a},
+	{1,  1500, 2, 5,     6, 0x07070809, 0x0a0b0b09},
+	{1,  1600, 2, 5,     8, 0x0808070b, 0x0c0d0e0a},
+	{1,  1700, 2, 4,     7, 0x080a0a0c, 0x0c0d0e0a},
+	{1,  1900, 2, 5,     9, 0x0a0b0c0e, 0x0f10120c},
+	{}
+};
+
+static const struct board_specific_parameters *udimms[] = {
+	udimm0,
+};
+#endif
diff --git a/board/freescale/t208xrdb/eth_t208xrdb.c b/board/freescale/t208xrdb/eth_t208xrdb.c
new file mode 100644
index 0000000000..cbbc625831
--- /dev/null
+++ b/board/freescale/t208xrdb/eth_t208xrdb.c
@@ -0,0 +1,106 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * Shengzhou Liu <Shengzhou.Liu@freescale.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <malloc.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/fsl_dtsec.h>
+#include <asm/fsl_serdes.h>
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_FMAN_ENET)
+	int i, interface;
+	struct memac_mdio_info dtsec_mdio_info;
+	struct memac_mdio_info tgec_mdio_info;
+	struct mii_dev *dev;
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 srds_s1;
+
+	srds_s1 = in_be32(&gur->rcwsr[4]) &
+					FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+	srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+	dtsec_mdio_info.regs =
+		(struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
+
+	dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+	/* Register the 1G MDIO bus */
+	fm_memac_mdio_init(bis, &dtsec_mdio_info);
+
+	tgec_mdio_info.regs =
+		(struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
+	tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+	/* Register the 10G MDIO bus */
+	fm_memac_mdio_init(bis, &tgec_mdio_info);
+
+	/* Set the two on-board RGMII PHY address */
+	fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR);
+	fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR);
+
+	switch (srds_s1) {
+	case 0x66:
+	case 0x6b:
+		fm_info_set_phy_address(FM1_10GEC1, CORTINA_PHY_ADDR1);
+		fm_info_set_phy_address(FM1_10GEC2, CORTINA_PHY_ADDR2);
+		fm_info_set_phy_address(FM1_10GEC3, FM1_10GEC3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_10GEC4, FM1_10GEC4_PHY_ADDR);
+		break;
+	default:
+		printf("SerDes1 protocol 0x%x is not supported on T208xRDB\n",
+		       srds_s1);
+		break;
+	}
+
+	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+		interface = fm_info_get_enet_if(i);
+		switch (interface) {
+		case PHY_INTERFACE_MODE_RGMII:
+			dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
+			fm_info_set_mdio(i, dev);
+			break;
+		default:
+			break;
+		}
+	}
+
+	for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
+		switch (fm_info_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_XGMII:
+			dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
+			fm_info_set_mdio(i, dev);
+			break;
+		default:
+			break;
+		}
+	}
+
+	cpu_eth_init(bis);
+#endif /* CONFIG_FMAN_ENET */
+
+	return pci_eth_init(bis);
+}
+
+void fdt_fixup_board_enet(void *fdt)
+{
+	return;
+}
diff --git a/board/freescale/t208xrdb/law.c b/board/freescale/t208xrdb/law.c
new file mode 100644
index 0000000000..eb82431e22
--- /dev/null
+++ b/board/freescale/t208xrdb/law.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2008-2014 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC),
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+	SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+	SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
+#endif
+#ifdef CONFIG_SYS_CPLD_BASE_PHYS
+	SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+	/* Limit DCSR to 32M to access NPC Trace Buffer */
+	SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/t208xrdb/pci.c b/board/freescale/t208xrdb/pci.c
new file mode 100644
index 0000000000..ba7041af95
--- /dev/null
+++ b/board/freescale/t208xrdb/pci.c
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2007-2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/fsl_pci.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/fsl_serdes.h>
+
+void pci_init_board(void)
+{
+	fsl_pcie_init_board(0);
+}
+
+void pci_of_setup(void *blob, bd_t *bd)
+{
+	FT_FSL_PCI_SETUP;
+}
diff --git a/board/freescale/t208xrdb/t2080_pbi.cfg b/board/freescale/t208xrdb/t2080_pbi.cfg
new file mode 100644
index 0000000000..e200d926fb
--- /dev/null
+++ b/board/freescale/t208xrdb/t2080_pbi.cfg
@@ -0,0 +1,41 @@
+#
+# Copyright 2013 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+# Refer doc/README.pblimage for more details about how-to configure
+# and create PBL boot image
+#
+
+#PBI commands
+#Initialize CPC1
+09010000 00200400
+09138000 00000000
+091380c0 00000100
+#512KB SRAM
+09010100 00000000
+09010104 fff80009
+09010f00 08000000
+#enable CPC1
+09010000 80000000
+#Configure LAW for CPC1
+09000d00 00000000
+09000d04 fff80000
+09000d08 81000012
+#Initialize eSPI controller, default configuration is slow for eSPI to
+#load data, this configuration comes from u-boot eSPI driver.
+09110000 80000403
+09110020 2d170008
+09110024 00100008
+09110028 00100008
+0911002c 00100008
+#Errata for slowing down the MDC clock to make it <= 2.5 MHZ
+094fc030 00008148
+094fd030 00008148
+#Configure alternate space
+09000010 00000000
+09000014 ff000000
+09000018 81000000
+#Flush PBL data
+09138000 00000000
+091380c0 00000000
diff --git a/board/freescale/t208xrdb/t2080_rcw.cfg b/board/freescale/t208xrdb/t2080_rcw.cfg
new file mode 100644
index 0000000000..cd62cc8641
--- /dev/null
+++ b/board/freescale/t208xrdb/t2080_rcw.cfg
@@ -0,0 +1,8 @@
+#PBL preamble and RCW header for T2080RDB
+aa55aa55 010e0100
+#SerDes Protocol: 0x66_0x16
+#Core/DDR: 1533Mhz/1600MT/s
+120c0017 15000000 00000000 00000000
+66160002 00008400 ec104000 c1000000
+00000000 00000000 00000000 000307fc
+00000000 00000000 00000000 00000004
diff --git a/board/freescale/t208xrdb/t208xrdb.c b/board/freescale/t208xrdb/t208xrdb.c
new file mode 100644
index 0000000000..f3fec2aa6e
--- /dev/null
+++ b/board/freescale/t208xrdb/t208xrdb.c
@@ -0,0 +1,124 @@
+/*
+ * Copyright 2009-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <netdev.h>
+#include <linux/compiler.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <fm_eth.h>
+#include "t208xrdb.h"
+#include "cpld.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	struct cpu_type *cpu = gd->arch.cpu;
+	static const char *freq[3] = {"100.00MHZ", "125.00MHz", "156.25MHZ"};
+
+	printf("Board: %sRDB, ", cpu->name);
+	printf("Board rev: 0x%02x CPLD ver: 0x%02x, boot from ",
+	       CPLD_READ(hw_ver), CPLD_READ(sw_ver));
+
+#ifdef CONFIG_SDCARD
+	puts("SD/MMC\n");
+#elif CONFIG_SPIFLASH
+	puts("SPI\n");
+#else
+	u8 reg;
+
+	reg = CPLD_READ(flash_csr);
+
+	if (reg & CPLD_BOOT_SEL) {
+		puts("NAND\n");
+	} else {
+		reg = ((reg & CPLD_LBMAP_MASK) >> CPLD_LBMAP_SHIFT);
+		printf("NOR vBank%d\n", ~reg & 0x7);
+	}
+#endif
+
+	puts("SERDES Reference Clocks:\n");
+	printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]);
+	printf("SD2_CLK1=%s, SD2_CLK2=%s\n", freq[0], freq[0]);
+
+	return 0;
+}
+
+int board_early_init_r(void)
+{
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+	/*
+	 * Remap Boot flash + PROMJET region to caching-inhibited
+	 * so that flash can be erased properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	/* invalidate existing TLB entry for flash + promjet */
+	disable_tlb(flash_esel);
+
+	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, flash_esel, BOOKE_PAGESZ_256M, 1);
+
+	set_liodns();
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	setup_portals();
+#endif
+
+	return 0;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+	return CONFIG_SYS_CLK_FREQ;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+	return CONFIG_DDR_CLK_FREQ;
+}
+
+int misc_init_r(void)
+{
+	return 0;
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+
+	ft_cpu_setup(blob, bd);
+
+	base = getenv_bootm_low();
+	size = getenv_bootm_size();
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_PCI
+	pci_of_setup(blob, bd);
+#endif
+
+	fdt_fixup_liodn(blob);
+	fdt_fixup_dr_usb(blob, bd);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+	fdt_fixup_fman_ethernet(blob);
+	fdt_fixup_board_enet(blob);
+#endif
+}
diff --git a/board/freescale/t208xrdb/t208xrdb.h b/board/freescale/t208xrdb/t208xrdb.h
new file mode 100644
index 0000000000..13380d02a3
--- /dev/null
+++ b/board/freescale/t208xrdb/t208xrdb.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CORENET_DS_H__
+#define __CORENET_DS_H__
+
+void fdt_fixup_board_enet(void *blob);
+void pci_of_setup(void *blob, bd_t *bd);
+
+#endif
diff --git a/board/freescale/t208xrdb/tlb.c b/board/freescale/t208xrdb/tlb.c
new file mode 100644
index 0000000000..085d9f5c6a
--- /dev/null
+++ b/board/freescale/t208xrdb/tlb.c
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2008-2014 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+
+	/* TLB 1 */
+	/* *I*** - Covers boot page */
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
+	/*
+	 * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the
+	 * SRAM is at 0xfff00000, it covered the 0xfffff000.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 0, BOOKE_PAGESZ_1M, 1),
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
+	/*
+	 * SRIO_PCIE_BOOT-SLAVE. When slave boot, the address of the
+	 * space is at 0xfff00000, it covered the 0xfffff000.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR,
+		      CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
+		      0, 0, BOOKE_PAGESZ_1M, 1),
+#else
+	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 0, BOOKE_PAGESZ_4K, 1),
+#endif
+
+	/* *I*G* - CCSRBAR */
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 1, BOOKE_PAGESZ_16M, 1),
+
+	/* *I*G* - Flash, localbus */
+	/* This will be changed to *I*G* after relocation to RAM. */
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+		      0, 2, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - PCIe 1, 0x80000000 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 3, BOOKE_PAGESZ_512M, 1),
+
+	/* *I*G* - PCIe 2, 0xa0000000 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_MEM_VIRT, CONFIG_SYS_PCIE2_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 4, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - PCIe 3, 0xb0000000 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 5, BOOKE_PAGESZ_256M, 1),
+
+
+	/* *I*G* - PCIe 4, 0xc0000000 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE4_MEM_VIRT, CONFIG_SYS_PCIE4_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 6, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - PCI I/O */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 7, BOOKE_PAGESZ_256K, 1),
+
+	/* Bman/Qman */
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 9, BOOKE_PAGESZ_16M, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000,
+		      CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 10, BOOKE_PAGESZ_16M, 1),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 11, BOOKE_PAGESZ_16M, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000,
+		      CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 12, BOOKE_PAGESZ_16M, 1),
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 13, BOOKE_PAGESZ_32M, 1),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE
+	/*
+	 * *I*G - NAND
+	 * entry 14 and 15 has been used hard coded, they will be disabled
+	 * in cpu_init_f, so we use entry 16 for nand.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 16, BOOKE_PAGESZ_64K, 1),
+#endif
+#ifdef CONFIG_SYS_CPLD_BASE
+	SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 17, BOOKE_PAGESZ_4K, 1),
+#endif
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+	/*
+	 * SRIO_PCIE_BOOT-SLAVE. 1M space from 0xffe00000 for
+	 * fetching ucode and ENV from master
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR,
+		      CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
+		      0, 18, BOOKE_PAGESZ_1M, 1),
+#endif
+#if defined(CONFIG_SYS_RAMBOOT)
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 19, BOOKE_PAGESZ_2G, 1)
+#endif
+
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/gaisler/gr_cpci_ax2000/config.mk b/board/gaisler/gr_cpci_ax2000/config.mk
index 309c879489..731a53905f 100644
--- a/board/gaisler/gr_cpci_ax2000/config.mk
+++ b/board/gaisler/gr_cpci_ax2000/config.mk
@@ -17,5 +17,3 @@ CONFIG_SYS_TEXT_BASE = 0x00000000
 
 # U-BOOT IN SDRAM
 #CONFIG_SYS_TEXT_BASE = 0x60000000
-
-PLATFORM_CPPFLAGS += -I$(TOPDIR)/board
diff --git a/board/gaisler/gr_ep2s60/config.mk b/board/gaisler/gr_ep2s60/config.mk
index d57efae158..6e01f07c0c 100644
--- a/board/gaisler/gr_ep2s60/config.mk
+++ b/board/gaisler/gr_ep2s60/config.mk
@@ -15,5 +15,3 @@ CONFIG_SYS_TEXT_BASE = 0x00000000
 
 # U-BOOT IN SDRAM
 #CONFIG_SYS_TEXT_BASE = 0x40000000
-
-PLATFORM_CPPFLAGS += -I$(TOPDIR)/board
diff --git a/board/gaisler/gr_xc3s_1500/config.mk b/board/gaisler/gr_xc3s_1500/config.mk
index e87320be99..e4a66cbcf1 100644
--- a/board/gaisler/gr_xc3s_1500/config.mk
+++ b/board/gaisler/gr_xc3s_1500/config.mk
@@ -14,5 +14,3 @@ CONFIG_SYS_TEXT_BASE = 0x00000000
 
 # U-BOOT IN RAM
 #CONFIG_SYS_TEXT_BASE = 0x40000000
-
-PLATFORM_CPPFLAGS += -I$(TOPDIR)/board
diff --git a/board/gaisler/grsim/config.mk b/board/gaisler/grsim/config.mk
index df26f82c9c..d1f61dac76 100644
--- a/board/gaisler/grsim/config.mk
+++ b/board/gaisler/grsim/config.mk
@@ -14,5 +14,3 @@ CONFIG_SYS_TEXT_BASE = 0x00000000
 
 # U-BOOT IN RAM
 #CONFIG_SYS_TEXT_BASE = 0x40000000
-
-PLATFORM_CPPFLAGS += -I$(TOPDIR)/board
diff --git a/board/gaisler/grsim_leon2/config.mk b/board/gaisler/grsim_leon2/config.mk
index 99f9a68725..f98b23b800 100644
--- a/board/gaisler/grsim_leon2/config.mk
+++ b/board/gaisler/grsim_leon2/config.mk
@@ -14,5 +14,3 @@ CONFIG_SYS_TEXT_BASE = 0x00000000
 
 # RUN U-BOOT FROM RAM
 #CONFIG_SYS_TEXT_BASE = 0x40000000
-
-PLATFORM_CPPFLAGS += -I$(TOPDIR)/board
diff --git a/board/highbank/highbank.c b/board/highbank/highbank.c
index 4b272c780e..a1b67494f6 100644
--- a/board/highbank/highbank.c
+++ b/board/highbank/highbank.c
@@ -9,7 +9,7 @@
 #include <netdev.h>
 #include <scsi.h>
 
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 #include <asm/io.h>
 
 #define HB_AHCI_BASE			0xffe08000
@@ -51,17 +51,23 @@ int board_eth_init(bd_t *bis)
 	return rc;
 }
 
-#ifdef CONFIG_MISC_INIT_R
-int misc_init_r(void)
+#ifdef CONFIG_SCSI_AHCI_PLAT
+void scsi_init(void)
 {
-	char envbuffer[16];
-	u32 boot_choice;
 	u32 reg = readl(HB_SREG_A9_PWRDOM_STAT);
 
 	if (reg & PWRDOM_STAT_SATA) {
 		ahci_init(HB_AHCI_BASE);
 		scsi_scan(1);
 	}
+}
+#endif
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+	char envbuffer[16];
+	u32 boot_choice;
 
 	boot_choice = readl(HB_SREG_A9_BOOT_SRC_STAT) & 0xff;
 	sprintf(envbuffer, "bootcmd%d", boot_choice);
diff --git a/board/hymod/config.mk b/board/hymod/config.mk
index ee15890c5b..2eeea50377 100644
--- a/board/hymod/config.mk
+++ b/board/hymod/config.mk
@@ -9,6 +9,6 @@
 # HYMOD boards
 #
 
-PLATFORM_CPPFLAGS += -I$(TOPDIR)
+PLATFORM_CPPFLAGS += -I$(srctree)
 
 OBJCOPYFLAGS = --remove-section=.ppcenv
diff --git a/board/hymod/hymod.h b/board/hymod/hymod.h
index 3ab3794901..7024d8a807 100644
--- a/board/hymod/hymod.h
+++ b/board/hymod/hymod.h
@@ -8,7 +8,7 @@
 #ifndef _HYMOD_H_
 #define _HYMOD_H_
 
-#ifdef CONFIG_8260
+#ifdef CONFIG_MPC8260
 #include <asm/iopin_8260.h>
 #endif
 
diff --git a/board/idmr/Makefile b/board/idmr/Makefile
deleted file mode 100644
index 67c2384c79..0000000000
--- a/board/idmr/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= idmr.o flash.o
diff --git a/board/idmr/config.mk b/board/idmr/config.mk
deleted file mode 100644
index 840a37e856..0000000000
--- a/board/idmr/config.mk
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-CONFIG_SYS_TEXT_BASE = 0xff800000
diff --git a/board/idmr/flash.c b/board/idmr/flash.c
deleted file mode 100644
index 52eb105c32..0000000000
--- a/board/idmr/flash.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-
-#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
-#define FLASH_BANK_SIZE 0x800000
-#define EN29LV640 0x227e227e
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case (AMD_MANUFACT & FLASH_VENDMASK):
-		printf ("AMD: ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case (EN29LV640 & FLASH_TYPEMASK):
-		printf ("EN29LV640 (16Mbit)\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		goto Done;
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; i++) {
-		if ((i % 5) == 0) {
-			printf ("\n   ");
-		}
-		printf (" %08lX%s", info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-
-      Done:
-	return;
-}
-
-
-unsigned long flash_init (void)
-{
-	int i, j;
-	ulong size = 0;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		ulong flashbase = 0;
-
-		flash_info[i].flash_id =
-			(AMD_MANUFACT & FLASH_VENDMASK) |
-			(EN29LV640 & FLASH_TYPEMASK);
-		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-		if (i == 0)
-			flashbase = PHYS_FLASH_1;
-		else
-			panic ("configured to many flash banks!\n");
-
-		for (j = 0; j < flash_info[i].sector_count; j++) {
-			flash_info[i].start[j] = flashbase + 0x10000 * j;
-		}
-		size += flash_info[i].size;
-	}
-
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_SYS_FLASH_BASE,
-		       CONFIG_SYS_FLASH_BASE + 0x2ffff, &flash_info[0]);
-
-	return size;
-}
-
-
-#define CMD_READ_ARRAY		0x00F0
-#define CMD_UNLOCK1		0x00AA
-#define CMD_UNLOCK2		0x0055
-#define CMD_ERASE_SETUP		0x0080
-#define CMD_ERASE_CONFIRM	0x0030
-#define CMD_PROGRAM		0x00A0
-#define CMD_UNLOCK_BYPASS	0x0020
-
-#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555<<1)))
-#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA<<1)))
-
-#define BIT_ERASE_DONE		0x0080
-#define BIT_RDY_MASK		0x0080
-#define BIT_PROGRAM_ERROR	0x0020
-#define BIT_TIMEOUT		0x80000000	/* our flag */
-
-#define READY 1
-#define ERR   2
-#define TMO   4
-
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	ulong result;
-	int iflag, prot, sect;
-	int rc = ERR_OK;
-	int chip1;
-	ulong start;
-
-	/* first look for protection bits */
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return ERR_UNKNOWN_FLASH_TYPE;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		return ERR_INVAL;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) !=
-	    (AMD_MANUFACT & FLASH_VENDMASK)) {
-		return ERR_UNKNOWN_FLASH_VENDOR;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-	if (prot)
-		return ERR_PROTECTED;
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-	iflag = disable_interrupts ();
-
-	printf ("\n");
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-		printf ("Erasing sector %2d ... ", sect);
-
-		/* arm simple, non interrupt dependent timer */
-		start = get_timer(0);
-
-		if (info->protect[sect] == 0) {	/* not protected */
-			volatile u16 *addr =
-				(volatile u16 *) (info->start[sect]);
-
-			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-			MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
-			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-			*addr = CMD_ERASE_CONFIRM;
-
-			/* wait until flash is ready */
-			chip1 = 0;
-
-			do {
-				result = *addr;
-
-				/* check timeout */
-				if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT * CONFIG_SYS_HZ / 1000) {
-					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-					chip1 = TMO;
-					break;
-				}
-
-				if (!chip1
-				    && (result & 0xFFFF) & BIT_ERASE_DONE)
-					chip1 = READY;
-
-			} while (!chip1);
-
-			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
-			if (chip1 == ERR) {
-				rc = ERR_PROG_ERROR;
-				goto outahere;
-			}
-			if (chip1 == TMO) {
-				rc = ERR_TIMOUT;
-				goto outahere;
-			}
-
-			printf ("ok.\n");
-		} else {	/* it was protected */
-
-			printf ("protected!\n");
-		}
-	}
-
-	if (ctrlc ())
-		printf ("User Interrupt!\n");
-
-      outahere:
-	/* allow flash to settle - wait 10 ms */
-	printf("Waiting 10 ms...");
-	 udelay (10000);
-
-/*	for (i = 0; i < 10 * 1000 * 1000; ++i)
-		asm(" nop");
-*/
-
-	printf("done\n");
-	if (iflag)
-		enable_interrupts ();
-
-
-	return rc;
-}
-
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
-	volatile u16 *addr = (volatile u16 *) dest;
-	ulong result;
-	int rc = ERR_OK;
-	int iflag;
-	int chip1;
-	ulong start;
-
-	/*
-	 * Check if Flash is (sufficiently) erased
-	 */
-	result = *addr;
-	if ((result & data) != data)
-		return ERR_NOT_ERASED;
-
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-	iflag = disable_interrupts ();
-
-	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-	MEM_FLASH_ADDR1 = CMD_PROGRAM;
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait until flash is ready */
-	chip1 = 0;
-	do {
-		result = *addr;
-
-		/* check timeout */
-		if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT * CONFIG_SYS_HZ / 1000) {
-			chip1 = ERR | TMO;
-			break;
-		}
-		if (!chip1 && ((result & 0x80) == (data & 0x80)))
-			chip1 = READY;
-
-	} while (!chip1);
-
-	*addr = CMD_READ_ARRAY;
-
-	if (chip1 == ERR || *addr != data)
-		rc = ERR_PROG_ERROR;
-
-	if (iflag)
-		enable_interrupts ();
-
-	return rc;
-}
-
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong wp, data;
-	int rc;
-
-	if (addr & 1) {
-		printf ("unaligned destination not supported\n");
-		return ERR_ALIGN;
-	}
-
-#if 0
-	if (cnt & 1) {
-		printf ("odd transfer sizes not supported\n");
-		return ERR_ALIGN;
-	}
-#endif
-
-	wp = addr;
-
-	if (addr & 1) {
-		data = (*((volatile u8 *) addr) << 8) | *((volatile u8 *)
-							  src);
-		if ((rc = write_word (info, wp - 1, data)) != 0) {
-			return (rc);
-		}
-		src += 1;
-		wp += 1;
-		cnt -= 1;
-	}
-
-	while (cnt >= 2) {
-		data = *((volatile u16 *) src);
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		src += 2;
-		wp += 2;
-		cnt -= 2;
-	}
-
-	if (cnt == 1) {
-		data = (*((volatile u8 *) src) << 8) |
-			*((volatile u8 *) (wp + 1));
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		src += 1;
-		wp += 1;
-		cnt -= 1;
-	}
-
-	return ERR_OK;
-}
diff --git a/board/idmr/idmr.c b/board/idmr/idmr.c
deleted file mode 100644
index 73660d802d..0000000000
--- a/board/idmr/idmr.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/immap.h>
-
-int checkboard (void) {
-	puts ("Board: iDMR\n");
-	return 0;
-};
-
-phys_size_t initdram (int board_type) {
-	int i;
-
-	/*
-	 * After reset, CS0 is configured to cover entire address space. We
-	 * need to configure it to its proper values, so that writes to
-	 * CONFIG_SYS_SDRAM_BASE and vicinity during SDRAM controller setup below do
-	 * now fall under CS0 (see 16.3.1 of the MCF5271 Reference Manual).
-	 */
-
-	/* Flash chipselect, CS0 */
-	/* ;CSAR0: Flash at 0xFF800000 */
-	mbar_writeShort(0x0080, 0xFF80);
-
-	/* CSCR0: Flash 6 waits, 16bit */
-	mbar_writeShort(0x008A, 0x1980);
-
-	/* CSMR0: Flash 8MB, R/W, valid */
-	mbar_writeLong(0x0084, 0x007F0001);
-
-
-	/*
-	 * SDRAM configuration proper
-	 */
-
-	/*
-	 * Address/Data Pin Assignment Reg.: enable address lines 23-21; do
-	 * not enable data pins D[15:0], as we have 16 bit port to SDRAM
-	 */
-	mbar_writeByte(MCF_GPIO_PAR_AD,
-			MCF_GPIO_AD_ADDR23 |
-			MCF_GPIO_AD_ADDR22 |
-			MCF_GPIO_AD_ADDR21);
-
-	/* No need to configure BS pins - reset values are OK */
-
-	/* Chip Select Pin Assignment Reg.: set CS[1-7] to GPIO */
-	mbar_writeByte(MCF_GPIO_PAR_CS, 0x00);
-
-	/* SDRAM Control Pin Assignment Reg. */
-	mbar_writeByte(MCF_GPIO_PAR_SDRAM,
-			MCF_GPIO_SDRAM_CSSDCS_00 | /* no matter: PAR_CS=0 */
-			MCF_GPIO_SDRAM_SDWE |
-			MCF_GPIO_SDRAM_SCAS |
-			MCF_GPIO_SDRAM_SRAS |
-			MCF_GPIO_SDRAM_SCKE |
-			MCF_GPIO_SDRAM_SDCS_01);
-
-	/*
-	 * Wait 100us.  We run the bus at 50MHz, one cycle is 20ns. So 5
-	 * iterations will do, but we do 10 just to be safe.
-	 */
-	for (i = 0; i < 10; ++i)
-		asm(" nop");
-
-
-	/* 1. Initialize DRAM Control Register: DCR */
-	mbar_writeShort(MCF_SDRAMC_DCR,
-			MCF_SDRAMC_DCR_RTIM(0x10) |	/* 65ns */
-			MCF_SDRAMC_DCR_RC(0x60));	/* 1562 cycles */
-
-
-	/*
-	 * 2. Initialize DACR0
-	 *
-	 * CL: 11 (CL=3: 0x03, 0x02; CL=2: 0x1)
-	 * CBM: cmd at A20, bank select bits 21 and up
-	 * PS: 16 bit
-	 */
-	mbar_writeLong(MCF_SDRAMC_DACR0,
-			MCF_SDRAMC_DACRn_BA(CONFIG_SYS_SDRAM_BASE>>18) |
-			MCF_SDRAMC_DACRn_BA(0x00) |
-			MCF_SDRAMC_DACRn_CASL(0x03) |
-			MCF_SDRAMC_DACRn_CBM(0x03) |
-			MCF_SDRAMC_DACRn_PS(0x03));
-
-	/* Initialize DMR0 */
-	mbar_writeLong(MCF_SDRAMC_DMR0,
-			MCF_SDRAMC_DMRn_BAM_16M |
-			MCF_SDRAMC_DMRn_V);
-
-
-	/* 3. Set IP bit in DACR to initiate PALL command */
-	mbar_writeLong(MCF_SDRAMC_DACR0,
-			mbar_readLong(MCF_SDRAMC_DACR0) |
-			MCF_SDRAMC_DACRn_IP);
-
-	/* Write to this block to initiate precharge */
-	*(volatile u16 *)(CONFIG_SYS_SDRAM_BASE) = 0xa5a5;
-
-	/*
-	 * Wait at least 20ns to allow banks to precharge (t_RP = 20ns). We
-	 * wait a wee longer, just to be safe.
-	 */
-	for (i = 0; i < 5; ++i)
-		asm(" nop");
-
-
-	/* 4. Set RE bit in DACR */
-	mbar_writeLong(MCF_SDRAMC_DACR0,
-			mbar_readLong(MCF_SDRAMC_DACR0) |
-			MCF_SDRAMC_DACRn_RE);
-
-	/*
-	 * Wait for at least 8 auto refresh cycles to occur, i.e. at least
-	 * 781 bus cycles.
-	 */
-	for (i = 0; i < 1000; ++i)
-		asm(" nop");
-
-	/* Finish the configuration by issuing the MRS */
-	mbar_writeLong(MCF_SDRAMC_DACR0,
-			mbar_readLong(MCF_SDRAMC_DACR0) |
-			MCF_SDRAMC_DACRn_MRS);
-
-	/*
-	 * Write to the SDRAM Mode Register A0-A11 = 0x400
-	 *
-	 * Write Burst Mode = Programmed Burst Length
-	 * Op Mode = Standard Op
-	 * CAS Latency = 3
-	 * Burst Type = Sequential
-	 * Burst Length = 1
-	 */
-	*(volatile u32 *)(CONFIG_SYS_SDRAM_BASE + 0x1800) = 0xa5a5a5a5;
-
-	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-};
-
-
-int testdram (void) {
-
-	/* TODO: XXX XXX XXX */
-	printf ("DRAM test not implemented!\n");
-
-	return (0);
-}
diff --git a/board/idmr/u-boot.lds b/board/idmr/u-boot.lds
deleted file mode 100644
index 4071f70d45..0000000000
--- a/board/idmr/u-boot.lds
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(m68k)
-
-SECTIONS
-{
-  .text      :
-  {
-    arch/m68k/cpu/mcf52x2/start.o	(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-
-  .reloc   :
-  {
-    __got_start = .;
-    KEEP(*(.got))
-    __got_end = .;
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)      :
-  {
-   _sbss = .;
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-   _ebss = .;
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/ip04/config.mk b/board/ip04/config.mk
index bc0e7476e5..ab0fbecab9 100644
--- a/board/ip04/config.mk
+++ b/board/ip04/config.mk
@@ -7,11 +7,6 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
 LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index 7a7500b342..3b2b1f15b8 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -8,7 +8,6 @@
 #include <twl4030.h>
 #include <netdev.h>
 #include <asm/gpio.h>
-#include <asm/omap_gpmc.h>
 #include <asm/io.h>
 #include <asm/arch/mem.h>
 #include <asm/arch/mmc_host_def.h>
diff --git a/board/korat/config.mk b/board/korat/config.mk
index f8dba2baae..42e0060094 100644
--- a/board/korat/config.mk
+++ b/board/korat/config.mk
@@ -23,5 +23,5 @@ PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8CFF0000
 endif
 
 ifndef CONFIG_KORAT_PERMANENT
-LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-F7FC.lds
+LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-F7FC.lds
 endif
diff --git a/board/matrix_vision/mvblm7/.gitignore b/board/matrix_vision/mvblm7/.gitignore
new file mode 100644
index 0000000000..469f1bc4c1
--- /dev/null
+++ b/board/matrix_vision/mvblm7/.gitignore
@@ -0,0 +1 @@
+bootscript.img
diff --git a/board/matrix_vision/mvblm7/Makefile b/board/matrix_vision/mvblm7/Makefile
index 1bc1d61dcf..b5987fde39 100644
--- a/board/matrix_vision/mvblm7/Makefile
+++ b/board/matrix_vision/mvblm7/Makefile
@@ -8,5 +8,11 @@ obj-y	:= mvblm7.o pci.o fpga.o
 
 extra-y := bootscript.img
 
+quiet_cmd_mkimage = UIMAGE  $@
+cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
+        $(if $(KBUILD_VERBOSE:1=), >/dev/null)
+
+MKIMAGEFLAGS_bootscript.image := -T script -C none -n M7_script
+
 $(obj)/bootscript.img: $(src)/bootscript
-	@mkimage -T script -C none -n M7_script -d $< $@
+	$(call cmd,mkimage)
diff --git a/board/matrix_vision/mvsmr/.gitignore b/board/matrix_vision/mvsmr/.gitignore
new file mode 100644
index 0000000000..469f1bc4c1
--- /dev/null
+++ b/board/matrix_vision/mvsmr/.gitignore
@@ -0,0 +1 @@
+bootscript.img
diff --git a/board/matrix_vision/mvsmr/Makefile b/board/matrix_vision/mvsmr/Makefile
index 9454259c17..fae7ec23b9 100644
--- a/board/matrix_vision/mvsmr/Makefile
+++ b/board/matrix_vision/mvsmr/Makefile
@@ -12,5 +12,11 @@ obj-y	:= mvsmr.o fpga.o
 
 extra-y := bootscript.img
 
+quiet_cmd_mkimage = UIMAGE  $@
+cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
+        $(if $(KBUILD_VERBOSE:1=), >/dev/null)
+
+MKIMAGEFLAGS_bootscript.image := -T script -C none -n mvSMR_Script
+
 $(obj)/bootscript.img: $(src)/bootscript
-	@mkimage -T script -C none -n mvSMR_Script -d $< $@
+	$(call cmd,mkimage)
diff --git a/board/micronas/vct/config.mk b/board/micronas/vct/config.mk
index 0f004e0ee0..354d918474 100644
--- a/board/micronas/vct/config.mk
+++ b/board/micronas/vct/config.mk
@@ -8,8 +8,6 @@
 # vct_xxx boards with MIPS 4Kc CPU core
 #
 
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
-
 ifndef CONFIG_SYS_TEXT_BASE
 CONFIG_SYS_TEXT_BASE = 0x87000000
 endif
diff --git a/board/mpl/common/usb_uhci.c b/board/mpl/common/usb_uhci.c
index 6bbb527dab..5590be1962 100644
--- a/board/mpl/common/usb_uhci.c
+++ b/board/mpl/common/usb_uhci.c
@@ -640,118 +640,9 @@ static void usb_display_wValue(unsigned short wValue,unsigned short wIndex) {}
 static void usb_display_Req(unsigned short req) {}
 #endif
 
-static unsigned char root_hub_dev_des[] =
-{
-	0x12,			/*  __u8  bLength; */
-	0x01,			/*  __u8  bDescriptorType; Device */
-	0x00,			/*  __u16 bcdUSB; v1.0 */
-	0x01,
-	0x09,			/*  __u8  bDeviceClass; HUB_CLASSCODE */
-	0x00,			/*  __u8  bDeviceSubClass; */
-	0x00,			/*  __u8  bDeviceProtocol; */
-	0x08,			/*  __u8  bMaxPacketSize0; 8 Bytes */
-	0x00,			/*  __u16 idVendor; */
-	0x00,
-	0x00,			/*  __u16 idProduct; */
-	0x00,
-	0x00,			/*  __u16 bcdDevice; */
-	0x00,
-	0x01,			/*  __u8  iManufacturer; */
-	0x00,			/*  __u8  iProduct; */
-	0x00,			/*  __u8  iSerialNumber; */
-	0x01			/*  __u8  bNumConfigurations; */
-};
-
-
-/* Configuration descriptor */
-static unsigned char root_hub_config_des[] =
-{
-	0x09,			/*  __u8  bLength; */
-	0x02,			/*  __u8  bDescriptorType; Configuration */
-	0x19,			/*  __u16 wTotalLength; */
-	0x00,
-	0x01,			/*  __u8  bNumInterfaces; */
-	0x01,			/*  __u8  bConfigurationValue; */
-	0x00,			/*  __u8  iConfiguration; */
-	0x40,			/*  __u8  bmAttributes;
-				   Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
-	0x00,			/*  __u8  MaxPower; */
-
-     /* interface */
-	0x09,			/*  __u8  if_bLength; */
-	0x04,			/*  __u8  if_bDescriptorType; Interface */
-	0x00,			/*  __u8  if_bInterfaceNumber; */
-	0x00,			/*  __u8  if_bAlternateSetting; */
-	0x01,			/*  __u8  if_bNumEndpoints; */
-	0x09,			/*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
-	0x00,			/*  __u8  if_bInterfaceSubClass; */
-	0x00,			/*  __u8  if_bInterfaceProtocol; */
-	0x00,			/*  __u8  if_iInterface; */
-
-     /* endpoint */
-	0x07,			/*  __u8  ep_bLength; */
-	0x05,			/*  __u8  ep_bDescriptorType; Endpoint */
-	0x81,			/*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
-	0x03,			/*  __u8  ep_bmAttributes; Interrupt */
-	0x08,			/*  __u16 ep_wMaxPacketSize; 8 Bytes */
-	0x00,
-	0xff			/*  __u8  ep_bInterval; 255 ms */
-};
-
-
-static unsigned char root_hub_hub_des[] =
-{
-	0x09,			/*  __u8  bLength; */
-	0x29,			/*  __u8  bDescriptorType; Hub-descriptor */
-	0x02,			/*  __u8  bNbrPorts; */
-	0x00,			/* __u16  wHubCharacteristics; */
-	0x00,
-	0x01,			/*  __u8  bPwrOn2pwrGood; 2ms */
-	0x00,			/*  __u8  bHubContrCurrent; 0 mA */
-	0x00,			/*  __u8  DeviceRemovable; *** 7 Ports max *** */
-	0xff			/*  __u8  PortPwrCtrlMask; *** 7 ports max *** */
-};
-
-static unsigned char root_hub_str_index0[] =
-{
-	0x04,			/*  __u8  bLength; */
-	0x03,			/*  __u8  bDescriptorType; String-descriptor */
-	0x09,			/*  __u8  lang ID */
-	0x04,			/*  __u8  lang ID */
-};
-
-static unsigned char root_hub_str_index1[] =
-{
-	28,			/*  __u8  bLength; */
-	0x03,			/*  __u8  bDescriptorType; String-descriptor */
-	'U',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'H',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'C',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'I',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	' ',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'R',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'o',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'o',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	't',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	' ',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'H',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'u',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'b',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-};
-
+#define WANT_USB_ROOT_HUB_HUB_DES
+#include <usbroothubdes.h>
+#undef WANT_USB_ROOT_HUB_HUB_DES
 
 /*
  * Root Hub Control Pipe (interrupt Pipes are not supported)
diff --git a/board/nvidia/dalmore/pinmux-config-dalmore.h b/board/nvidia/dalmore/pinmux-config-dalmore.h
index 8c05a1517c..9dcd5e42af 100644
--- a/board/nvidia/dalmore/pinmux-config-dalmore.h
+++ b/board/nvidia/dalmore/pinmux-config-dalmore.h
@@ -132,8 +132,8 @@ static struct pingroup_config tegra114_pinmux_common[] = {
 	DEFAULT_PINMUX(ULPI_STP,      ULPI,        NORMAL,    NORMAL,   OUTPUT),
 
 	/* I2C3 pinmux */
-	I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
-	I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+	I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
+	I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
 
 	/* VI pinmux */
 	VI_PINMUX(CAM_MCLK, VI_ALT3,  NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
@@ -145,8 +145,8 @@ static struct pingroup_config tegra114_pinmux_common[] = {
 	VI_PINMUX(GPIO_PBB4, VGP4,    NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
 
 	/* I2C2 pinmux */
-	I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
-	I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+	I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
+	I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
 
 	/* UARTD pinmux */
 	DEFAULT_PINMUX(GMI_A16,       UARTD,       NORMAL,    NORMAL,   OUTPUT),
@@ -224,8 +224,8 @@ static struct pingroup_config tegra114_pinmux_common[] = {
 	DEFAULT_PINMUX(KB_ROW9,       UARTA,       NORMAL,    NORMAL,   OUTPUT),
 
 	/* I2CPWR pinmux (I2C5) */
-	I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
-	I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+	I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
+	I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
 
 	/* SYSCLK pinmux */
 	DEFAULT_PINMUX(SYS_CLK_REQ,   SYSCLK,      NORMAL,    NORMAL,   OUTPUT),
@@ -252,8 +252,8 @@ static struct pingroup_config tegra114_pinmux_common[] = {
 	DEFAULT_PINMUX(CLK3_OUT,      EXTPERIPH3,  NORMAL,    NORMAL,   OUTPUT),
 
 	/* I2C1 pinmux */
-	I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
-	I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+	I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
+	I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
 
 	/* UARTB pinmux */
 	DEFAULT_PINMUX(UART2_CTS_N,   UARTB,       NORMAL,    TRISTATE, INPUT),
diff --git a/board/nvidia/venice2/pinmux-config-venice2.h b/board/nvidia/venice2/pinmux-config-venice2.h
index 50868e6488..b3d68d589a 100644
--- a/board/nvidia/venice2/pinmux-config-venice2.h
+++ b/board/nvidia/venice2/pinmux-config-venice2.h
@@ -124,12 +124,12 @@ static struct pingroup_config tegra124_pinmux_common[] = {
 	DEFAULT_PINMUX(ULPI_STP,      SPI1,        NORMAL,    NORMAL,   INPUT),
 
 	/* I2C3 (TPM) pinmux */
-	I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
-	I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+	I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
+	I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
 
 	/* I2C2 pinmux */
-	I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
-	I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+	I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
+	I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
 
 	/* UARTD pinmux (UART4 on Servo board, unused) */
 	DEFAULT_PINMUX(GPIO_PJ7,      UARTD,       NORMAL,    NORMAL,   OUTPUT),
@@ -198,8 +198,8 @@ static struct pingroup_config tegra124_pinmux_common[] = {
 	DEFAULT_PINMUX(KB_ROW10,      UARTA,       UP,        TRISTATE, INPUT),
 
 	/* I2CPWR pinmux (I2C5) */
-	I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
-	I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+	I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
+	I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
 
 	/* RTCK pinmux */
 	DEFAULT_PINMUX(JTAG_RTCK,     RTCK,        NORMAL,    NORMAL,   INPUT),
@@ -223,8 +223,8 @@ static struct pingroup_config tegra124_pinmux_common[] = {
 	DEFAULT_PINMUX(CLK3_OUT,      EXTPERIPH3,  NORMAL,    NORMAL,   OUTPUT),
 
 	/* I2C1 pinmux */
-	I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
-	I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+	I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
+	I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
 
 	/* UARTB, GPS */
 	DEFAULT_PINMUX(UART2_CTS_N,   UARTB,       NORMAL,    TRISTATE, INPUT),
diff --git a/board/overo/overo.c b/board/overo/overo.c
index 9ac35d2f4e..1192d02e91 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -21,7 +21,6 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/mem.h>
 #include <asm/arch/sys_proto.h>
-#include <asm/omap_gpmc.h>
 #include <asm/gpio.h>
 #include <asm/mach-types.h>
 #include "overo.h"
diff --git a/board/pr1/config.mk b/board/pr1/config.mk
deleted file mode 100644
index 2436ec07f4..0000000000
--- a/board/pr1/config.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Copyright (c) Switchfin Org. <dpn@switchfin.org>
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
diff --git a/board/renesas/ecovec/lowlevel_init.S b/board/renesas/ecovec/lowlevel_init.S
index eeebdd245f..e4c40c8616 100644
--- a/board/renesas/ecovec/lowlevel_init.S
+++ b/board/renesas/ecovec/lowlevel_init.S
@@ -20,7 +20,7 @@
 
 lowlevel_init:
 
-	/* jump to 0xA0020000 if bit 1 of PVDR_A */
+	/* jump to CONFIG_ECOVEC_ROMIMAGE_ADDR if bit 1 of PVDR_A */
 	mov.l	PVDR_A, r1
 	mov.l	PVDR_D, r2
 	mov.b	@r1, r0
diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c
index a63438343e..ec3ac89593 100644
--- a/board/ronetix/pm9261/pm9261.c
+++ b/board/ronetix/pm9261/pm9261.c
@@ -9,7 +9,7 @@
  */
 
 #include <common.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
 #include <asm/arch/at91sam9_smc.h>
diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
index 3cedeef8ae..3aaffa803c 100644
--- a/board/ronetix/pm9263/pm9263.c
+++ b/board/ronetix/pm9263/pm9263.c
@@ -9,7 +9,7 @@
  */
 
 #include <common.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
 #include <asm/arch/at91sam9_smc.h>
diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c
index c9f2747007..15aa4acd11 100644
--- a/board/ronetix/pm9g45/pm9g45.c
+++ b/board/ronetix/pm9g45/pm9g45.c
@@ -12,7 +12,7 @@
  */
 
 #include <common.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
 #include <asm/arch/at91sam9_smc.h>
diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
index cd873bc56d..de154e0f64 100644
--- a/board/samsung/common/board.c
+++ b/board/samsung/common/board.c
@@ -22,16 +22,24 @@
 #include <asm/arch/power.h>
 #include <power/pmic.h>
 #include <asm/arch/sromc.h>
-#include <power/max77686_pmic.h>
+#include <lcd.h>
+#include <samsung/misc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-struct local_info {
-	struct cros_ec_dev *cros_ec_dev;	/* Pointer to cros_ec device */
-	int cros_ec_err;			/* Error for cros_ec, 0 if ok */
-};
+int __exynos_early_init_f(void)
+{
+	return 0;
+}
+int exynos_early_init_f(void)
+	__attribute__((weak, alias("__exynos_early_init_f")));
 
-static struct local_info local;
+int __exynos_power_init(void)
+{
+	return 0;
+}
+int exynos_power_init(void)
+	__attribute__((weak, alias("__exynos_power_init")));
 
 #if defined CONFIG_EXYNOS_TMU
 /* Boot Time Thermal Analysis for SoC temperature threshold breach */
@@ -140,155 +148,21 @@ int board_early_init_f(void)
 	board_i2c_init(gd->fdt_blob);
 #endif
 
-	return err;
-}
-#endif
-
-struct cros_ec_dev *board_get_cros_ec_dev(void)
-{
-	return local.cros_ec_dev;
-}
-
-#ifdef CONFIG_CROS_EC
-static int board_init_cros_ec_devices(const void *blob)
-{
-	local.cros_ec_err = cros_ec_init(blob, &local.cros_ec_dev);
-	if (local.cros_ec_err)
-		return -1;  /* Will report in board_late_init() */
-
-	return 0;
+	return exynos_early_init_f();
 }
 #endif
 
 #if defined(CONFIG_POWER)
-#ifdef CONFIG_POWER_MAX77686
-static int pmic_reg_update(struct pmic *p, int reg, uint regval)
-{
-	u32 val;
-	int ret = 0;
-
-	ret = pmic_reg_read(p, reg, &val);
-	if (ret) {
-		debug("%s: PMIC %d register read failed\n", __func__, reg);
-		return -1;
-	}
-	val |= regval;
-	ret = pmic_reg_write(p, reg, val);
-	if (ret) {
-		debug("%s: PMIC %d register write failed\n", __func__, reg);
-		return -1;
-	}
-	return 0;
-}
-
-static int max77686_init(void)
-{
-	struct pmic *p;
-
-	if (pmic_init(I2C_PMIC))
-		return -1;
-
-	p = pmic_get("MAX77686_PMIC");
-	if (!p)
-		return -ENODEV;
-
-	if (pmic_probe(p))
-		return -1;
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN))
-		return -1;
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT,
-			    MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V))
-		return -1;
-
-	/* VDD_MIF */
-	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
-			   MAX77686_BUCK1OUT_1V)) {
-		debug("%s: PMIC %d register write failed\n", __func__,
-		      MAX77686_REG_PMIC_BUCK1OUT);
-		return -1;
-	}
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL,
-			    MAX77686_BUCK1CTRL_EN))
-		return -1;
-
-	/* VDD_ARM */
-	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1,
-			   MAX77686_BUCK2DVS1_1_3V)) {
-		debug("%s: PMIC %d register write failed\n", __func__,
-		      MAX77686_REG_PMIC_BUCK2DVS1);
-		return -1;
-	}
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1,
-			    MAX77686_BUCK2CTRL_ON))
-		return -1;
-
-	/* VDD_INT */
-	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1,
-			   MAX77686_BUCK3DVS1_1_0125V)) {
-		debug("%s: PMIC %d register write failed\n", __func__,
-		      MAX77686_REG_PMIC_BUCK3DVS1);
-		return -1;
-	}
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL,
-			    MAX77686_BUCK3CTRL_ON))
-		return -1;
-
-	/* VDD_G3D */
-	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1,
-			   MAX77686_BUCK4DVS1_1_2V)) {
-		debug("%s: PMIC %d register write failed\n", __func__,
-		      MAX77686_REG_PMIC_BUCK4DVS1);
-		return -1;
-	}
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1,
-			    MAX77686_BUCK3CTRL_ON))
-		return -1;
-
-	/* VDD_LDO2 */
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1,
-			    MAX77686_LD02CTRL1_1_5V | EN_LDO))
-		return -1;
-
-	/* VDD_LDO3 */
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1,
-			    MAX77686_LD03CTRL1_1_8V | EN_LDO))
-		return -1;
-
-	/* VDD_LDO5 */
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1,
-			    MAX77686_LD05CTRL1_1_8V | EN_LDO))
-		return -1;
-
-	/* VDD_LDO10 */
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1,
-			    MAX77686_LD10CTRL1_1_8V | EN_LDO))
-		return -1;
-
-	return 0;
-}
-#endif
-
 int power_init_board(void)
 {
-	int ret = 0;
-
 	set_ps_hold_ctrl();
 
-#ifdef CONFIG_POWER_MAX77686
-	ret = max77686_init();
-#endif
-
-	return ret;
+	return exynos_power_init();
 }
 #endif
 
 #ifdef CONFIG_OF_CONTROL
+#ifdef CONFIG_SMC911X
 static int decode_sromc(const void *blob, struct fdt_sromc *config)
 {
 	int err;
@@ -312,6 +186,7 @@ static int decode_sromc(const void *blob, struct fdt_sromc *config)
 	}
 	return 0;
 }
+#endif
 
 int board_eth_init(bd_t *bis)
 {
@@ -369,27 +244,47 @@ int board_mmc_init(bd_t *bis)
 {
 	int ret;
 
+#ifdef CONFIG_SDHCI
+	/* mmc initializattion for available channels */
+	ret = exynos_mmc_init(gd->fdt_blob);
+	if (ret)
+		debug("mmc init failed\n");
+#endif
+#ifdef CONFIG_DWMMC
 	/* dwmmc initializattion for available channels */
 	ret = exynos_dwmmc_init(gd->fdt_blob);
 	if (ret)
 		debug("dwmmc init failed\n");
+#endif
 
 	return ret;
 }
 #endif
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	const char *board_name;
+
+	board_name = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
+	printf("Board: %s\n", board_name ? board_name : "unknown");
+
+	return 0;
+}
 #endif
+#endif /* CONFIG_OF_CONTROL */
 
 #ifdef CONFIG_BOARD_LATE_INIT
 int board_late_init(void)
 {
 	stdio_print_current_devices();
 
-	if (local.cros_ec_err) {
+	if (cros_ec_get_error()) {
 		/* Force console on */
 		gd->flags &= ~GD_FLG_SILENT;
 
 		printf("cros-ec communications failure %d\n",
-		       local.cros_ec_err);
+		       cros_ec_get_error());
 		puts("\nPlease reset with Power+Refresh\n\n");
 		panic("Cannot init cros-ec device");
 		return -1;
@@ -401,7 +296,7 @@ int board_late_init(void)
 int arch_early_init_r(void)
 {
 #ifdef CONFIG_CROS_EC
-	if (board_init_cros_ec_devices(gd->fdt_blob)) {
+	if (cros_ec_board_init()) {
 		printf("%s: Failed to init EC\n", __func__);
 		return 0;
 	}
@@ -409,3 +304,21 @@ int arch_early_init_r(void)
 
 	return 0;
 }
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+	set_board_info();
+#endif
+#ifdef CONFIG_LCD_MENU
+	keys_init();
+	check_boot_mode();
+#endif
+#ifdef CONFIG_CMD_BMP
+	if (panel_info.logo_on)
+		draw_logo();
+#endif
+	return 0;
+}
+#endif
diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c
index eb157394ad..3ff4289780 100644
--- a/board/samsung/common/misc.c
+++ b/board/samsung/common/misc.c
@@ -11,7 +11,7 @@
 #include <samsung/misc.h>
 #include <errno.h>
 #include <version.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/gpio.h>
 #include <asm/gpio.h>
diff --git a/board/samsung/origen/origen.c b/board/samsung/origen/origen.c
index 15f77cacbd..d502f02d3d 100644
--- a/board/samsung/origen/origen.c
+++ b/board/samsung/origen/origen.c
@@ -11,129 +11,35 @@
 #include <asm/arch/mmc.h>
 #include <asm/arch/periph.h>
 #include <asm/arch/pinmux.h>
+#include <usb.h>
 
 DECLARE_GLOBAL_DATA_PTR;
-struct exynos4_gpio_part1 *gpio1;
-struct exynos4_gpio_part2 *gpio2;
 
-int board_init(void)
+u32 get_board_rev(void)
 {
-	gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
-	gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
-
-	gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
 	return 0;
 }
 
-static int board_uart_init(void)
+int exynos_init(void)
 {
-	int err;
-
-	err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
-	if (err) {
-		debug("UART0 not configured\n");
-		return err;
-	}
-
-	err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
-	if (err) {
-		debug("UART1 not configured\n");
-		return err;
-	}
-
-	err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
-	if (err) {
-		debug("UART2 not configured\n");
-		return err;
-	}
-
-	err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
-	if (err) {
-		debug("UART3 not configured\n");
-		return err;
-	}
-
 	return 0;
 }
 
-#ifdef CONFIG_BOARD_EARLY_INIT_F
-int board_early_init_f(void)
-{
-	int err;
-	err = board_uart_init();
-	if (err) {
-		debug("UART init failed\n");
-		return err;
-	}
-	return err;
-}
-#endif
-
-int dram_init(void)
+int board_usb_init(int index, enum usb_init_type init)
 {
-	gd->ram_size	= get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
-			+ get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE)
-			+ get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE)
-			+ get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE);
-
 	return 0;
 }
 
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, \
-							PHYS_SDRAM_1_SIZE);
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, \
-							PHYS_SDRAM_2_SIZE);
-	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
-	gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3, \
-							PHYS_SDRAM_3_SIZE);
-	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
-	gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4, \
-							PHYS_SDRAM_4_SIZE);
-}
-
-#ifdef CONFIG_DISPLAY_BOARDINFO
-int checkboard(void)
+#ifdef CONFIG_USB_CABLE_CHECK
+int usb_cable_connected(void)
 {
-	printf("\nBoard: ORIGEN\n");
 	return 0;
 }
 #endif
 
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_init(bd_t *bis)
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int exynos_early_init_f(void)
 {
-	int i, err;
-
-	/*
-	 * MMC2 SD card GPIO:
-	 *
-	 * GPK2[0]	SD_2_CLK(2)
-	 * GPK2[1]	SD_2_CMD(2)
-	 * GPK2[2]	SD_2_CDn
-	 * GPK2[3:6]	SD_2_DATA[0:3](2)
-	 */
-	for (i = 0; i < 7; i++) {
-		/* GPK2[0:6] special function 2 */
-		s5p_gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2));
-
-		/* GPK2[0:6] drv 4x */
-		s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
-
-		/* GPK2[0:1] pull disable */
-		if (i == 0 || i == 1) {
-			s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
-			continue;
-		}
-
-		/* GPK2[2:6] pull up */
-		s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_UP);
-	}
-
-	err = s5p_mmc_init(2, 4);
-	return err;
+	return 0;
 }
 #endif
diff --git a/board/samsung/smdk5250/exynos5-dt.c b/board/samsung/smdk5250/exynos5-dt.c
index 5fb8664936..379a45cc23 100644
--- a/board/samsung/smdk5250/exynos5-dt.c
+++ b/board/samsung/smdk5250/exynos5-dt.c
@@ -5,7 +5,6 @@
  */
 
 #include <common.h>
-#include <cros_ec.h>
 #include <fdtdec.h>
 #include <asm/io.h>
 #include <errno.h>
@@ -45,21 +44,6 @@ int exynos_init(void)
 	return 0;
 }
 
-#ifdef CONFIG_DISPLAY_BOARDINFO
-int checkboard(void)
-{
-	const char *board_name;
-
-	board_name = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
-	if (board_name == NULL)
-		printf("\nUnknown Board\n");
-	else
-		printf("\nBoard: %s\n", board_name);
-
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_LCD
 void exynos_cfg_lcd_gpio(void)
 {
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
index a69f73d5e8..28a6d9e718 100644
--- a/board/samsung/smdk5250/smdk5250.c
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -147,6 +147,131 @@ void board_i2c_init(const void *blob)
 	}
 }
 
+#if defined(CONFIG_POWER)
+#ifdef CONFIG_POWER_MAX77686
+static int pmic_reg_update(struct pmic *p, int reg, uint regval)
+{
+	u32 val;
+	int ret = 0;
+
+	ret = pmic_reg_read(p, reg, &val);
+	if (ret) {
+		debug("%s: PMIC %d register read failed\n", __func__, reg);
+		return -1;
+	}
+	val |= regval;
+	ret = pmic_reg_write(p, reg, val);
+	if (ret) {
+		debug("%s: PMIC %d register write failed\n", __func__, reg);
+		return -1;
+	}
+	return 0;
+}
+
+static int max77686_init(void)
+{
+	struct pmic *p;
+
+	if (pmic_init(I2C_PMIC))
+		return -1;
+
+	p = pmic_get("MAX77686_PMIC");
+	if (!p)
+		return -ENODEV;
+
+	if (pmic_probe(p))
+		return -1;
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN))
+		return -1;
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT,
+			    MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V))
+		return -1;
+
+	/* VDD_MIF */
+	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
+			   MAX77686_BUCK1OUT_1V)) {
+		debug("%s: PMIC %d register write failed\n", __func__,
+		      MAX77686_REG_PMIC_BUCK1OUT);
+		return -1;
+	}
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL,
+			    MAX77686_BUCK1CTRL_EN))
+		return -1;
+
+	/* VDD_ARM */
+	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1,
+			   MAX77686_BUCK2DVS1_1_3V)) {
+		debug("%s: PMIC %d register write failed\n", __func__,
+		      MAX77686_REG_PMIC_BUCK2DVS1);
+		return -1;
+	}
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1,
+			    MAX77686_BUCK2CTRL_ON))
+		return -1;
+
+	/* VDD_INT */
+	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1,
+			   MAX77686_BUCK3DVS1_1_0125V)) {
+		debug("%s: PMIC %d register write failed\n", __func__,
+		      MAX77686_REG_PMIC_BUCK3DVS1);
+		return -1;
+	}
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL,
+			    MAX77686_BUCK3CTRL_ON))
+		return -1;
+
+	/* VDD_G3D */
+	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1,
+			   MAX77686_BUCK4DVS1_1_2V)) {
+		debug("%s: PMIC %d register write failed\n", __func__,
+		      MAX77686_REG_PMIC_BUCK4DVS1);
+		return -1;
+	}
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1,
+			    MAX77686_BUCK3CTRL_ON))
+		return -1;
+
+	/* VDD_LDO2 */
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1,
+			    MAX77686_LD02CTRL1_1_5V | EN_LDO))
+		return -1;
+
+	/* VDD_LDO3 */
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1,
+			    MAX77686_LD03CTRL1_1_8V | EN_LDO))
+		return -1;
+
+	/* VDD_LDO5 */
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1,
+			    MAX77686_LD05CTRL1_1_8V | EN_LDO))
+		return -1;
+
+	/* VDD_LDO10 */
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1,
+			    MAX77686_LD10CTRL1_1_8V | EN_LDO))
+		return -1;
+
+	return 0;
+}
+#endif	/* CONFIG_POWER_MAX77686 */
+
+int exynos_power_init(void)
+{
+	int ret = 0;
+
+#ifdef CONFIG_POWER_MAX77686
+	ret = max77686_init();
+#endif
+	return ret;
+}
+#endif	/* CONFIG_POWER */
+
 #ifdef CONFIG_LCD
 void exynos_cfg_lcd_gpio(void)
 {
diff --git a/board/samsung/smdk5420/smdk5420.c b/board/samsung/smdk5420/smdk5420.c
index 3ad2ad0e56..e4606ecd2a 100644
--- a/board/samsung/smdk5420/smdk5420.c
+++ b/board/samsung/smdk5420/smdk5420.c
@@ -142,18 +142,3 @@ int board_get_revision(void)
 {
 	return 0;
 }
-
-#ifdef CONFIG_DISPLAY_BOARDINFO
-int checkboard(void)
-{
-	const char *board_name;
-
-	board_name = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
-	if (board_name == NULL)
-		printf("\nUnknown Board\n");
-	else
-		printf("\nBoard: %s\n", board_name);
-
-	return 0;
-}
-#endif
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index b72550538a..7c79e7b73a 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -12,23 +12,20 @@
 #include <asm/io.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/mmc.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/clock.h>
-#include <asm/arch/clk.h>
 #include <asm/arch/mipi_dsim.h>
 #include <asm/arch/watchdog.h>
 #include <asm/arch/power.h>
 #include <power/pmic.h>
 #include <usb/s3c_udc.h>
 #include <power/max8997_pmic.h>
-#include <libtizen.h>
 #include <power/max8997_muic.h>
 #include <power/battery.h>
 #include <power/max17042_fg.h>
+#include <libtizen.h>
 #include <usb.h>
 #include <usb_mass_storage.h>
-#include <samsung/misc.h>
 
 #include "setup.h"
 
@@ -46,10 +43,8 @@ u32 get_board_rev(void)
 static void check_hw_revision(void);
 struct s3c_plat_otg_data s5pc210_otg_data;
 
-int board_init(void)
+int exynos_init(void)
 {
-	gd->bd->bi_boot_params = CONFIG_SYS_SPL_ARGS_ADDR;
-
 	check_hw_revision();
 	printf("HW Revision:\t0x%x\n", board_rev);
 
@@ -281,7 +276,7 @@ static int pmic_init_max8997(void)
 	return 0;
 }
 
-int power_init_board(void)
+int exynos_power_init(void)
 {
 	int chrg, ret;
 	struct power_battery *pb;
@@ -350,28 +345,6 @@ int power_init_board(void)
 	return 0;
 }
 
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
-		get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE) +
-		get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE) +
-		get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE);
-
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
-	gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
-	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
-	gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-}
-
 static unsigned int get_hw_revision(void)
 {
 	struct exynos4_gpio_part1 *gpio =
@@ -404,55 +377,6 @@ static void check_hw_revision(void)
 	board_rev |= hwrev;
 }
 
-#ifdef CONFIG_DISPLAY_BOARDINFO
-int checkboard(void)
-{
-	puts("Board:\tTRATS\n");
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_init(bd_t *bis)
-{
-	struct exynos4_gpio_part2 *gpio =
-		(struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
-	int err;
-
-	/* eMMC_EN: SD_0_CDn: GPK0[2] Output High */
-	s5p_gpio_direction_output(&gpio->k0, 2, 1);
-	s5p_gpio_set_pull(&gpio->k0, 2, GPIO_PULL_NONE);
-
-	/*
-	 * MMC device init
-	 * mmc0	 : eMMC (8-bit buswidth)
-	 * mmc2	 : SD card (4-bit buswidth)
-	 */
-	err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
-	if (err)
-		debug("SDMMC0 not configured\n");
-	else
-		err = s5p_mmc_init(0, 8);
-
-	/* T-flash detect */
-	s5p_gpio_cfg_pin(&gpio->x3, 4, 0xf);
-	s5p_gpio_set_pull(&gpio->x3, 4, GPIO_PULL_UP);
-
-	/*
-	 * Check the T-flash  detect pin
-	 * GPX3[4] T-flash detect pin
-	 */
-	if (!s5p_gpio_get_value(&gpio->x3, 4)) {
-		err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
-		if (err)
-			debug("SDMMC2 not configured\n");
-		else
-			err = s5p_mmc_init(2, 4);
-	}
-
-	return err;
-}
-#endif
 
 #ifdef CONFIG_USB_GADGET
 static int s5pc210_phy_control(int on)
@@ -599,38 +523,22 @@ static void board_power_init(void)
 	writel(0, (unsigned int)&pwr->arm_core1_configuration);
 }
 
-static void board_uart_init(void)
+static void exynos_uart_init(void)
 {
-	struct exynos4_gpio_part1 *gpio1 =
-		(struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
 	struct exynos4_gpio_part2 *gpio2 =
 		(struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
-	int i;
-
-	/*
-	 * UART2 GPIOs
-	 * GPA1CON[0] = UART_2_RXD(2)
-	 * GPA1CON[1] = UART_2_TXD(2)
-	 * GPA1CON[2] = I2C_3_SDA (3)
-	 * GPA1CON[3] = I2C_3_SCL (3)
-	 */
-
-	for (i = 0; i < 4; i++) {
-		s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE);
-		s5p_gpio_cfg_pin(&gpio1->a1, i, GPIO_FUNC((i > 1) ? 0x3 : 0x2));
-	}
 
 	/* UART_SEL GPY4[7] (part2) at EXYNOS4 */
 	s5p_gpio_set_pull(&gpio2->y4, 7, GPIO_PULL_UP);
 	s5p_gpio_direction_output(&gpio2->y4, 7, 1);
 }
 
-int board_early_init_f(void)
+int exynos_early_init_f(void)
 {
 	wdt_stop();
 	pmic_reset();
 	board_clock_init();
-	board_uart_init();
+	exynos_uart_init();
 	board_power_init();
 
 	return 0;
@@ -648,7 +556,7 @@ void exynos_reset_lcd(void)
 	s5p_gpio_direction_output(&gpio2->y4, 5, 1);
 }
 
-static int lcd_power(void)
+int lcd_power(void)
 {
 	int ret = 0;
 	struct pmic *p = pmic_get("MAX8997_PMIC");
@@ -671,46 +579,7 @@ static int lcd_power(void)
 	return 0;
 }
 
-static struct mipi_dsim_config dsim_config = {
-	.e_interface		= DSIM_VIDEO,
-	.e_virtual_ch		= DSIM_VIRTUAL_CH_0,
-	.e_pixel_format		= DSIM_24BPP_888,
-	.e_burst_mode		= DSIM_BURST_SYNC_EVENT,
-	.e_no_data_lane		= DSIM_DATA_LANE_4,
-	.e_byte_clk		= DSIM_PLL_OUT_DIV8,
-	.hfp			= 1,
-
-	.p			= 3,
-	.m			= 120,
-	.s			= 1,
-
-	/* D-PHY PLL stable time spec :min = 200usec ~ max 400usec */
-	.pll_stable_time	= 500,
-
-	/* escape clk : 10MHz */
-	.esc_clk		= 20 * 1000000,
-
-	/* stop state holding counter after bta change count 0 ~ 0xfff */
-	.stop_holding_cnt	= 0x7ff,
-	/* bta timeout 0 ~ 0xff */
-	.bta_timeout		= 0xff,
-	/* lp rx timeout 0 ~ 0xffff */
-	.rx_timeout		= 0xffff,
-};
-
-static struct exynos_platform_mipi_dsim s6e8ax0_platform_data = {
-	.lcd_panel_info = NULL,
-	.dsim_config = &dsim_config,
-};
-
-static struct mipi_dsim_lcd_device mipi_lcd_device = {
-	.name	= "s6e8ax0",
-	.id	= -1,
-	.bus_id	= 0,
-	.platform_data	= (void *)&s6e8ax0_platform_data,
-};
-
-static int mipi_power(void)
+int mipi_power(void)
 {
 	int ret = 0;
 	struct pmic *p = pmic_get("MAX8997_PMIC");
@@ -733,75 +602,13 @@ static int mipi_power(void)
 	return 0;
 }
 
-vidinfo_t panel_info = {
-	.vl_freq	= 60,
-	.vl_col		= 720,
-	.vl_row		= 1280,
-	.vl_width	= 720,
-	.vl_height	= 1280,
-	.vl_clkp	= CONFIG_SYS_HIGH,
-	.vl_hsp		= CONFIG_SYS_LOW,
-	.vl_vsp		= CONFIG_SYS_LOW,
-	.vl_dp		= CONFIG_SYS_LOW,
-	.vl_bpix	= 4,	/* Bits per pixel, 2^4 = 16 */
-
-	/* s6e8ax0 Panel infomation */
-	.vl_hspw	= 5,
-	.vl_hbpd	= 10,
-	.vl_hfpd	= 10,
-
-	.vl_vspw	= 2,
-	.vl_vbpd	= 1,
-	.vl_vfpd	= 13,
-	.vl_cmd_allow_len = 0xf,
-
-	.win_id		= 3,
-	.dual_lcd_enabled = 0,
-
-	.init_delay	= 0,
-	.power_on_delay = 0,
-	.reset_delay	= 0,
-	.interface_mode = FIMD_RGB_INTERFACE,
-	.mipi_enabled	= 1,
-};
-
-void init_panel_info(vidinfo_t *vid)
+void exynos_lcd_misc_init(vidinfo_t *vid)
 {
-	vid->logo_on	= 1,
-	vid->resolution	= HD_RESOLUTION,
-	vid->rgb_mode	= MODE_RGB_P,
-
 #ifdef CONFIG_TIZEN
 	get_tizen_logo_info(vid);
 #endif
-	mipi_lcd_device.reverse_panel = 1;
-
-	strcpy(s6e8ax0_platform_data.lcd_panel_name, mipi_lcd_device.name);
-	s6e8ax0_platform_data.lcd_power = lcd_power;
-	s6e8ax0_platform_data.mipi_power = mipi_power;
-	s6e8ax0_platform_data.phy_enable = set_mipi_phy_ctrl;
-	s6e8ax0_platform_data.lcd_panel_info = (void *)vid;
-	exynos_mipi_dsi_register_lcd_device(&mipi_lcd_device);
+#ifdef CONFIG_S6E8AX0
 	s6e8ax0_init();
-	exynos_set_dsim_platform_data(&s6e8ax0_platform_data);
-
 	setenv("lcdinfo", "lcd=s6e8ax0");
-}
-
-#ifdef CONFIG_MISC_INIT_R
-int misc_init_r(void)
-{
-#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-	set_board_info();
-#endif
-#ifdef CONFIG_LCD_MENU
-	keys_init();
-	check_boot_mode();
 #endif
-#ifdef CONFIG_CMD_BMP
-	if (panel_info.logo_on)
-		draw_logo();
-#endif
-	return 0;
 }
-#endif
diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c
index c17c24d60a..2a6c9f9170 100644
--- a/board/samsung/trats2/trats2.c
+++ b/board/samsung/trats2/trats2.c
@@ -8,15 +8,9 @@
 
 #include <common.h>
 #include <lcd.h>
-#include <asm/io.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/power.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/mipi_dsim.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/power.h>
+#include <asm/arch/mipi_dsim.h>
 #include <power/pmic.h>
 #include <power/max77686_pmic.h>
 #include <power/battery.h>
@@ -28,7 +22,6 @@
 #include <usb.h>
 #include <usb/s3c_udc.h>
 #include <usb_mass_storage.h>
-#include <samsung/misc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -69,16 +62,6 @@ static void check_hw_revision(void)
 	board_rev = modelrev << 8;
 }
 
-#ifdef CONFIG_DISPLAY_BOARDINFO
-int checkboard(void)
-{
-	puts("Board:\tTRATS2\n");
-	printf("HW Revision:\t0x%04x\n", board_rev);
-
-	return 0;
-}
-#endif
-
 u32 get_board_rev(void)
 {
 	return board_rev;
@@ -156,33 +139,24 @@ int get_soft_i2c_sda_pin(void)
 }
 #endif
 
-int board_early_init_f(void)
+int exynos_early_init_f(void)
 {
-	check_hw_revision();
 	board_external_gpio_init();
 
-	gd->flags |= GD_FLG_DISABLE_CONSOLE;
-
 	return 0;
 }
 
 static int pmic_init_max77686(void);
 
-int board_init(void)
+int exynos_init(void)
 {
-	struct exynos4_power *pwr =
-		(struct exynos4_power *)samsung_get_base_power();
-
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	/* workaround: clear INFORM4..5 */
-	writel(0, (unsigned int)&pwr->inform4);
-	writel(0, (unsigned int)&pwr->inform5);
+	check_hw_revision();
+	printf("HW Revision:\t0x%04x\n", board_rev);
 
 	return 0;
 }
 
-int power_init_board(void)
+int exynos_power_init(void)
 {
 	int chrg;
 	struct power_battery *pb;
@@ -248,90 +222,6 @@ int power_init_board(void)
 	return 0;
 }
 
-int dram_init(void)
-{
-	u32 size_mb;
-
-	size_mb = (get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
-		get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE) +
-		get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE) +
-		get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE)) >> 20;
-
-	gd->ram_size = size_mb << 20;
-
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
-	gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
-	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
-	gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-}
-
-int board_mmc_init(bd_t *bis)
-{
-	int err0, err2 = 0;
-
-	gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
-
-	/* eMMC_EN: SD_0_CDn: GPK0[2] Output High */
-	s5p_gpio_direction_output(&gpio2->k0, 2, 1);
-	s5p_gpio_set_pull(&gpio2->k0, 2, GPIO_PULL_NONE);
-
-	/*
-	 * eMMC GPIO:
-	 * SDR 8-bit@48MHz at MMC0
-	 * GPK0[0]      SD_0_CLK(2)
-	 * GPK0[1]      SD_0_CMD(2)
-	 * GPK0[2]      SD_0_CDn        -> Not used
-	 * GPK0[3:6]    SD_0_DATA[0:3](2)
-	 * GPK1[3:6]    SD_0_DATA[0:3](3)
-	 *
-	 * DDR 4-bit@26MHz at MMC4
-	 * GPK0[0]      SD_4_CLK(3)
-	 * GPK0[1]      SD_4_CMD(3)
-	 * GPK0[2]      SD_4_CDn        -> Not used
-	 * GPK0[3:6]    SD_4_DATA[0:3](3)
-	 * GPK1[3:6]    SD_4_DATA[4:7](4)
-	 */
-
-	err0 = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
-
-	/*
-	 * MMC device init
-	 * mmc0  : eMMC (8-bit buswidth)
-	 * mmc2  : SD card (4-bit buswidth)
-	 */
-	if (err0)
-		debug("SDMMC0 not configured\n");
-	else
-		err0 = s5p_mmc_init(0, 8);
-
-	/* T-flash detect */
-	s5p_gpio_cfg_pin(&gpio2->x3, 4, 0xf);
-	s5p_gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP);
-
-	/*
-	 * Check the T-flash  detect pin
-	 * GPX3[4] T-flash detect pin
-	 */
-	if (!s5p_gpio_get_value(&gpio2->x3, 4)) {
-		err2 = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
-		if (err2)
-			debug("SDMMC2 not configured\n");
-		else
-			err2 = s5p_mmc_init(2, 4);
-	}
-
-	return err0 & err2;
-}
-
 #ifdef CONFIG_USB_GADGET
 static int s5pc210_phy_control(int on)
 {
@@ -479,46 +369,7 @@ static int pmic_init_max77686(void)
  */
 
 #ifdef CONFIG_LCD
-static struct mipi_dsim_config dsim_config = {
-	.e_interface		= DSIM_VIDEO,
-	.e_virtual_ch		= DSIM_VIRTUAL_CH_0,
-	.e_pixel_format		= DSIM_24BPP_888,
-	.e_burst_mode		= DSIM_BURST_SYNC_EVENT,
-	.e_no_data_lane		= DSIM_DATA_LANE_4,
-	.e_byte_clk		= DSIM_PLL_OUT_DIV8,
-	.hfp			= 1,
-
-	.p			= 3,
-	.m			= 120,
-	.s			= 1,
-
-	/* D-PHY PLL stable time spec :min = 200usec ~ max 400usec */
-	.pll_stable_time	= 500,
-
-	/* escape clk : 10MHz */
-	.esc_clk		= 20 * 1000000,
-
-	/* stop state holding counter after bta change count 0 ~ 0xfff */
-	.stop_holding_cnt	= 0x7ff,
-	/* bta timeout 0 ~ 0xff */
-	.bta_timeout		= 0xff,
-	/* lp rx timeout 0 ~ 0xffff */
-	.rx_timeout		= 0xffff,
-};
-
-static struct exynos_platform_mipi_dsim dsim_platform_data = {
-	.lcd_panel_info = NULL,
-	.dsim_config = &dsim_config,
-};
-
-static struct mipi_dsim_lcd_device mipi_lcd_device = {
-	.name	= "s6e8ax0",
-	.id	= -1,
-	.bus_id	= 0,
-	.platform_data	= (void *)&dsim_platform_data,
-};
-
-static int mipi_power(void)
+int mipi_power(void)
 {
 	struct pmic *p = pmic_get("MAX77686_PMIC");
 
@@ -556,77 +407,13 @@ void exynos_reset_lcd(void)
 	s5p_gpio_set_value(&gpio1->f2, 1, 1);
 }
 
-vidinfo_t panel_info = {
-	.vl_freq	= 60,
-	.vl_col		= 720,
-	.vl_row		= 1280,
-	.vl_width	= 720,
-	.vl_height	= 1280,
-	.vl_clkp	= CONFIG_SYS_HIGH,
-	.vl_hsp		= CONFIG_SYS_LOW,
-	.vl_vsp		= CONFIG_SYS_LOW,
-	.vl_dp		= CONFIG_SYS_LOW,
-	.vl_bpix	= 4,	/* Bits per pixel, 2^4 = 16 */
-
-	/* s6e8ax0 Panel infomation */
-	.vl_hspw	= 5,
-	.vl_hbpd	= 10,
-	.vl_hfpd	= 10,
-
-	.vl_vspw	= 2,
-	.vl_vbpd	= 1,
-	.vl_vfpd	= 13,
-	.vl_cmd_allow_len = 0xf,
-	.mipi_enabled = 1,
-
-	.dual_lcd_enabled = 0,
-
-	.init_delay	= 0,
-	.power_on_delay = 25,
-	.reset_delay	= 0,
-	.interface_mode = FIMD_RGB_INTERFACE,
-};
-
-void init_panel_info(vidinfo_t *vid)
+void exynos_lcd_misc_init(vidinfo_t *vid)
 {
-	vid->logo_on	= 1;
-	vid->resolution	= HD_RESOLUTION;
-	vid->rgb_mode	= MODE_RGB_P;
-
-	vid->power_on_delay = 30;
-
-	mipi_lcd_device.reverse_panel = 1;
-
 #ifdef CONFIG_TIZEN
 	get_tizen_logo_info(vid);
 #endif
-
-	strcpy(dsim_platform_data.lcd_panel_name, mipi_lcd_device.name);
-	dsim_platform_data.mipi_power = mipi_power;
-	dsim_platform_data.phy_enable = set_mipi_phy_ctrl;
-	dsim_platform_data.lcd_panel_info = (void *)vid;
-	exynos_mipi_dsi_register_lcd_device(&mipi_lcd_device);
-
+#ifdef CONFIG_S6E8AX0
 	s6e8ax0_init();
-
-	exynos_set_dsim_platform_data(&dsim_platform_data);
-}
-#endif /* LCD */
-
-#ifdef CONFIG_MISC_INIT_R
-int misc_init_r(void)
-{
-#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-	set_board_info();
-#endif
-#ifdef CONFIG_LCD_MENU
-	keys_init();
-	check_boot_mode();
 #endif
-#ifdef CONFIG_CMD_BMP
-	if (panel_info.logo_on)
-		draw_logo();
-#endif
-	return 0;
 }
-#endif
+#endif /* LCD */
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
index 96da7e0861..f9d71b617d 100644
--- a/board/samsung/universal_c210/universal.c
+++ b/board/samsung/universal_c210/universal.c
@@ -13,16 +13,17 @@
 #include <asm/gpio.h>
 #include <asm/arch/adc.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/mmc.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/watchdog.h>
-#include <libtizen.h>
 #include <ld9040.h>
 #include <power/pmic.h>
+#include <usb.h>
 #include <usb/s3c_udc.h>
 #include <asm/arch/cpu.h>
 #include <power/max8998_pmic.h>
+#include <libtizen.h>
 #include <samsung/misc.h>
+#include <usb_mass_storage.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -42,7 +43,7 @@ static int get_hwrev(void)
 
 static void init_pmic_lcd(void);
 
-int power_init_board(void)
+int exynos_power_init(void)
 {
 	int ret;
 
@@ -59,22 +60,6 @@ int power_init_board(void)
 	return 0;
 }
 
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
-		get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
-
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-}
-
 static unsigned short get_adc_value(int channel)
 {
 	struct s5p_adc *adc = (struct s5p_adc *)samsung_get_base_adc();
@@ -159,71 +144,6 @@ static void check_hw_revision(void)
 	board_rev |= hwrev;
 }
 
-#ifdef CONFIG_DISPLAY_BOARDINFO
-int checkboard(void)
-{
-	puts("Board:\tUniversal C210\n");
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_init(bd_t *bis)
-{
-	int err;
-
-	switch (get_hwrev()) {
-	case 0:
-		/*
-		 * Set the low to enable LDO_EN
-		 * But when you use the test board for eMMC booting
-		 * you should set it HIGH since it removes the inverter
-		 */
-		/* MASSMEMORY_EN: XMDMDATA_6: GPE3[6] */
-		s5p_gpio_direction_output(&gpio1->e3, 6, 0);
-		break;
-	default:
-		/*
-		 * Default reset state is High and there's no inverter
-		 * But set it as HIGH to ensure
-		 */
-		/* MASSMEMORY_EN: XMDMADDR_3: GPE1[3] */
-		s5p_gpio_direction_output(&gpio1->e1, 3, 1);
-		break;
-	}
-
-	/*
-	 * MMC device init
-	 * mmc0	 : eMMC (8-bit buswidth)
-	 * mmc2	 : SD card (4-bit buswidth)
-	 */
-	err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
-	if (err)
-		debug("SDMMC0 not configured\n");
-	else
-		err = s5p_mmc_init(0, 8);
-
-	/* T-flash detect */
-	s5p_gpio_cfg_pin(&gpio2->x3, 4, 0xf);
-	s5p_gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP);
-
-	/*
-	 * Check the T-flash  detect pin
-	 * GPX3[4] T-flash detect pin
-	 */
-	if (!s5p_gpio_get_value(&gpio2->x3, 4)) {
-		err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
-		if (err)
-			debug("SDMMC2 not configured\n");
-		else
-			err = s5p_mmc_init(2, 4);
-	}
-
-	return err;
-
-}
-#endif
-
 #ifdef CONFIG_USB_GADGET
 static int s5pc210_phy_control(int on)
 {
@@ -271,7 +191,20 @@ struct s3c_plat_otg_data s5pc210_otg_data = {
 };
 #endif
 
-int board_early_init_f(void)
+int board_usb_init(int index, enum usb_init_type init)
+{
+	debug("USB_udc_probe\n");
+	return s3c_udc_probe(&s5pc210_otg_data);
+}
+
+#ifdef CONFIG_USB_CABLE_CHECK
+int usb_cable_connected(void)
+{
+	return 0;
+}
+#endif
+
+int exynos_early_init_f(void)
 {
 	wdt_stop();
 
@@ -412,6 +345,11 @@ void exynos_cfg_lcd_gpio(void)
 	spi_init();
 }
 
+int mipi_power(void)
+{
+	return 0;
+}
+
 void exynos_reset_lcd(void)
 {
 	s5p_gpio_set_value(&gpio2->y4, 5, 1);
@@ -436,39 +374,6 @@ void exynos_lcd_power_on(void)
 	pmic_set_output(p, MAX8998_REG_ONOFF2, MAX8998_LDO7, LDO_ON);
 }
 
-vidinfo_t panel_info = {
-	.vl_freq	= 60,
-	.vl_col		= 480,
-	.vl_row		= 800,
-	.vl_width	= 480,
-	.vl_height	= 800,
-	.vl_clkp	= CONFIG_SYS_HIGH,
-	.vl_hsp		= CONFIG_SYS_HIGH,
-	.vl_vsp		= CONFIG_SYS_HIGH,
-	.vl_dp		= CONFIG_SYS_HIGH,
-
-	.vl_bpix	= 4,	/* Bits per pixel */
-
-	/* LD9040 LCD Panel */
-	.vl_hspw	= 2,
-	.vl_hbpd	= 16,
-	.vl_hfpd	= 16,
-
-	.vl_vspw	= 2,
-	.vl_vbpd	= 8,
-	.vl_vfpd	= 8,
-	.vl_cmd_allow_len = 0xf,
-
-	.win_id		= 0,
-	.dual_lcd_enabled = 0,
-
-	.init_delay	= 0,
-	.power_on_delay = 10000,
-	.reset_delay	= 10000,
-	.interface_mode = FIMD_RGB_INTERFACE,
-	.mipi_enabled	= 0,
-};
-
 void exynos_cfg_ldo(void)
 {
 	ld9040_cfg_ldo();
@@ -479,30 +384,32 @@ void exynos_enable_ldo(unsigned int onoff)
 	ld9040_enable_ldo(onoff);
 }
 
-void init_panel_info(vidinfo_t *vid)
-{
-	vid->logo_on	= 1;
-	vid->resolution	= HD_RESOLUTION;
-	vid->rgb_mode	= MODE_RGB_P;
-
-#ifdef CONFIG_TIZEN
-	get_tizen_logo_info(vid);
-#endif
-
-	/* for LD9040. */
-	vid->pclk_name = 1;	/* MPLL */
-	vid->sclk_div = 1;
-
-	setenv("lcdinfo", "lcd=ld9040");
-}
-
-int board_init(void)
+int exynos_init(void)
 {
 	gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
 	gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
 
 	gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	switch (get_hwrev()) {
+	case 0:
+		/*
+		 * Set the low to enable LDO_EN
+		 * But when you use the test board for eMMC booting
+		 * you should set it HIGH since it removes the inverter
+		 */
+		/* MASSMEMORY_EN: XMDMDATA_6: GPE3[6] */
+		s5p_gpio_direction_output(&gpio1->e3, 6, 0);
+		break;
+	default:
+		/*
+		 * Default reset state is High and there's no inverter
+		 * But set it as HIGH to ensure
+		 */
+		/* MASSMEMORY_EN: XMDMADDR_3: GPE1[3] */
+		s5p_gpio_direction_output(&gpio1->e1, 3, 1);
+		break;
+	}
 
 #ifdef CONFIG_SOFT_SPI
 	soft_spi_init();
@@ -513,20 +420,15 @@ int board_init(void)
 	return 0;
 }
 
-#ifdef CONFIG_MISC_INIT_R
-int misc_init_r(void)
+void exynos_lcd_misc_init(vidinfo_t *vid)
 {
-#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-	set_board_info();
-#endif
-#ifdef CONFIG_LCD_MENU
-	keys_init();
-	check_boot_mode();
-#endif
-#ifdef CONFIG_CMD_BMP
-	if (panel_info.logo_on)
-		draw_logo();
+#ifdef CONFIG_TIZEN
+	get_tizen_logo_info(vid);
 #endif
-	return 0;
+
+	/* for LD9040. */
+	vid->pclk_name = 1;	/* MPLL */
+	vid->sclk_div = 1;
+
+	setenv("lcdinfo", "lcd=ld9040");
 }
-#endif
diff --git a/board/sandbox/sandbox/sandbox.c b/board/sandbox/sandbox/sandbox.c
index 95efaffcb1..e4d4e021bc 100644
--- a/board/sandbox/sandbox/sandbox.c
+++ b/board/sandbox/sandbox/sandbox.c
@@ -4,8 +4,10 @@
  */
 
 #include <common.h>
-
+#include <cros_ec.h>
+#include <dm.h>
 #include <os.h>
+#include <asm/u-boot-sandbox.h>
 
 /*
  * Pointer to initial global data area
@@ -14,6 +16,11 @@
  */
 gd_t *gd;
 
+/* Add a simple GPIO device */
+U_BOOT_DEVICE(gpio_sandbox) = {
+	.name = "gpio_sandbox",
+};
+
 void flush_cache(unsigned long start, unsigned long size)
 {
 }
@@ -28,3 +35,49 @@ int dram_init(void)
 	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
 	return 0;
 }
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+#ifdef CONFIG_VIDEO_SANDBOX_SDL
+	int ret;
+
+	ret = sandbox_lcd_sdl_early_init();
+	if (ret) {
+		puts("Could not init sandbox LCD emulation\n");
+		return ret;
+	}
+#endif
+
+	return 0;
+}
+#endif
+
+int arch_early_init_r(void)
+{
+#ifdef CONFIG_CROS_EC
+	if (cros_ec_board_init()) {
+		printf("%s: Failed to init EC\n", __func__);
+		return 0;
+	}
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+	if (cros_ec_get_error()) {
+		/* Force console on */
+		gd->flags &= ~GD_FLG_SILENT;
+
+		printf("cros-ec communications failure %d\n",
+		       cros_ec_get_error());
+		puts("\nPlease reset with Power+Refresh\n\n");
+		panic("Cannot init cros-ec device");
+		return -1;
+	}
+	return 0;
+}
+#endif
diff --git a/board/sheldon/simpc8313/config.mk b/board/sheldon/simpc8313/config.mk
deleted file mode 100644
index d1b4e2eeb6..0000000000
--- a/board/sheldon/simpc8313/config.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-ifdef CONFIG_NAND_LP
-PAD_TO = 0xFFF20000
-else
-PAD_TO = 0xFFF04000
-endif
diff --git a/board/siemens/dxr2/board.c b/board/siemens/dxr2/board.c
index 217237900e..38ac93d795 100644
--- a/board/siemens/dxr2/board.c
+++ b/board/siemens/dxr2/board.c
@@ -232,13 +232,6 @@ int board_eth_init(bd_t *bis)
 
 	factoryset_setenv();
 
-	/* Reset SMSC LAN9303 switch for default configuration */
-	gpio_request(GPIO_LAN9303_NRST, "nRST");
-	gpio_direction_output(GPIO_LAN9303_NRST, 0);
-	/* assert active low reset for 200us */
-	udelay(200);
-	gpio_set_value(GPIO_LAN9303_NRST, 1);
-
 	/* Set rgmii mode and enable rmii clock to be sourced from chip */
 	writel((RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE), &cdev->miisel);
 
@@ -249,6 +242,25 @@ int board_eth_init(bd_t *bis)
 		n += rv;
 	return n;
 }
+
+static int do_switch_reset(cmd_tbl_t *cmdtp, int flag, int argc,
+			   char *const argv[])
+{
+	/* Reset SMSC LAN9303 switch for default configuration */
+	gpio_request(GPIO_LAN9303_NRST, "nRST");
+	gpio_direction_output(GPIO_LAN9303_NRST, 0);
+	/* assert active low reset for 200us */
+	udelay(200);
+	gpio_set_value(GPIO_LAN9303_NRST, 1);
+
+	return 0;
+};
+
+U_BOOT_CMD(
+	switch_rst, CONFIG_SYS_MAXARGS, 1,	do_switch_reset,
+	"Reset LAN9303 switch via its reset pin",
+	""
+);
 #endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */
 #endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
 
diff --git a/board/synopsys/arcangel4/Makefile b/board/synopsys/arcangel4/Makefile
deleted file mode 100644
index 575e58fd96..0000000000
--- a/board/synopsys/arcangel4/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-# This board is mostly used for debugging U-Boot in simulation (ISS).
-# The only peripheral which is used on this board is a serial port which
-# requires no initialization except those in "include/configs/arcangel4.h".
-# And now there's no specific initializations for this board.
-# So this Makefile is only required for satisfaction of U-Boot build system.
diff --git a/board/tcm-bf518/config.mk b/board/tcm-bf518/config.mk
deleted file mode 100644
index 0d3df2dbd9..0000000000
--- a/board/tcm-bf518/config.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
diff --git a/board/tcm-bf537/config.mk b/board/tcm-bf537/config.mk
index 97eaafef2e..7f9138b09b 100644
--- a/board/tcm-bf537/config.mk
+++ b/board/tcm-bf537/config.mk
@@ -7,10 +7,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
diff --git a/board/ti/am335x/README b/board/ti/am335x/README
index 2a30ab8981..947305b58d 100644
--- a/board/ti/am335x/README
+++ b/board/ti/am335x/README
@@ -46,23 +46,42 @@ NAND
 The AM335x GP EVM ships with a 256MiB NAND available in most profiles.  In
 this example to program the NAND we assume that an SD card has been
 inserted with the files to write in the first SD slot and that mtdparts
-have been configured correctly for the board.  As a time saving measure we
-load MLO into memory in one location, copy it into the three locatations
-that the ROM checks for additional valid copies, then load U-Boot into
-memory.  We then write that whole section of memory to NAND.
-
-U-Boot # mmc rescan
-U-Boot # env default -f -a
-U-Boot # nand erase.chip
-U-Boot # saveenv
-U-Boot # load mmc 0 81000000 MLO
-U-Boot # cp.b 81000000 81020000 20000
-U-Boot # cp.b 81000000 81040000 20000
-U-Boot # cp.b 81000000 81060000 20000
-U-Boot # load mmc 0 81080000 u-boot.img
-U-Boot # nand write 81000000 0 260000
-U-Boot # load mmc 0 ${loadaddr} uImage
-U-Boot # nand write ${loadaddr} kernel 500000
+have been configured correctly for the board. All images are first loaded
+into memory, then written to NAND.
+
+Step-1: Building u-boot for NAND boot
+	Set following CONFIGxx options for NAND device.
+	CONFIG_SYS_NAND_PAGE_SIZE	number of main bytes in NAND page
+	CONFIG_SYS_NAND_OOBSIZE		number of OOB bytes in NAND page
+	CONFIG_SYS_NAND_BLOCK_SIZE	number of bytes in NAND erase-block
+	CONFIG_SYS_NAND_ECCPOS		ECC map for NAND page
+	CONFIG_NAND_OMAP_ECCSCHEME	(refer doc/README.nand)
+
+Step-2: Flashing NAND via MMC/SD
+	# select BOOTSEL to MMC/SD boot and boot from MMC/SD card
+	U-Boot # mmc rescan
+	# erase flash
+	U-Boot # nand erase.chip
+	U-Boot # env default -f -a
+	U-Boot # saveenv
+	# flash MLO. Redundant copies of MLO are kept for failsafe
+	U-Boot # load mmc 0 0x82000000 MLO
+	U-Boot # nand write 0x82000000 0x00000 0x20000
+	U-Boot # nand write 0x82000000 0x20000 0x20000
+	U-Boot # nand write 0x82000000 0x40000 0x20000
+	U-Boot # nand write 0x82000000 0x60000 0x20000
+	# flash u-boot.img
+	U-Boot # load mmc 0 0x82000000 u-boot.img
+	U-Boot # nand write 0x82000000 0x80000 0x60000
+	# flash kernel image
+	U-Boot # load mmc 0 0x82000000 uImage
+	U-Boot # nand write 0x82000000 ${nandsrcaddr} ${nandimgsize}
+	# flash filesystem image
+	U-Boot # load mmc 0 0x82000000 filesystem.img
+	U-Boot # nand write 0x82000000 ${loadaddress} 0x300000
+
+Step-3: Set BOOTSEL pin to select NAND boot, and POR the device.
+	The device should boot from images flashed on NAND device.
 
 NOR
 ===
diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
index c2c0e2e8c7..f1951dc5ef 100644
--- a/board/wandboard/wandboard.c
+++ b/board/wandboard/wandboard.c
@@ -17,7 +17,7 @@
 #include <asm/imx-common/iomux-v3.h>
 #include <asm/imx-common/boot_mode.h>
 #include <asm/io.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 #include <common.h>
 #include <fsl_esdhc.h>
 #include <ipu_pixfmt.h>
diff --git a/board/xilinx/ml507/.gitignore b/board/xilinx/ml507/.gitignore
deleted file mode 100644
index f6418a0c50..0000000000
--- a/board/xilinx/ml507/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/config.tmp
diff --git a/board/xilinx/ml507/Makefile b/board/xilinx/ml507/Makefile
index 3c84651063..9a3809f3c0 100644
--- a/board/xilinx/ml507/Makefile
+++ b/board/xilinx/ml507/Makefile
@@ -8,4 +8,4 @@
 
 obj-y	+= ml507.o
 
-include $(SRCTREE)/board/xilinx/ppc440-generic/Makefile
+include $(srctree)/board/xilinx/ppc440-generic/Makefile
diff --git a/board/xilinx/ppc405-generic/.gitignore b/board/xilinx/ppc405-generic/.gitignore
deleted file mode 100644
index b644f59941..0000000000
--- a/board/xilinx/ppc405-generic/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-config.tmp
diff --git a/board/xilinx/ppc440-generic/.gitignore b/board/xilinx/ppc440-generic/.gitignore
deleted file mode 100644
index f6418a0c50..0000000000
--- a/board/xilinx/ppc440-generic/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/config.tmp
diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index 82f2345c95..485a5e4a24 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -5,6 +5,7 @@
  */
 
 #include <common.h>
+#include <fdtdec.h>
 #include <netdev.h>
 #include <zynqpl.h>
 #include <asm/arch/hardware.h>
@@ -134,8 +135,27 @@ int board_mmc_init(bd_t *bd)
 
 int dram_init(void)
 {
+#ifdef CONFIG_OF_CONTROL
+	int node;
+	fdt_addr_t addr;
+	fdt_size_t size;
+	const void *blob = gd->fdt_blob;
+
+	node = fdt_node_offset_by_prop_value(blob, -1, "device_type",
+					     "memory", 7);
+	if (node == -FDT_ERR_NOTFOUND) {
+		debug("ZYNQ DRAM: Can't get memory node\n");
+		return -1;
+	}
+	addr = fdtdec_get_addr_size(blob, node, "reg", &size);
+	if (addr == FDT_ADDR_T_NONE || size == 0) {
+		debug("ZYNQ DRAM: Can't get base address or size\n");
+		return -1;
+	}
+	gd->ram_size = size;
+#else
 	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
-
+#endif
 	zynq_ddrc_init();
 
 	return 0;
author	Stefano Babic <sbabic@denx.de>	2014-04-04 11:35:30 +0200
committer	Stefano Babic <sbabic@denx.de>	2014-04-04 11:35:30 +0200
commit	1cad23c5f471d695bed1e3907e30caee3c2a3056 (patch)
tree	34e035df5db9b327aeae36eff9d0645a915e3177 /board
parent	5dd73bc0a40a4b318195eab871a1f535aad6b43b (diff)
parent	00b132bf34c5be86a108ac7fe8231ad9e97f6de4 (diff)