diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2015-04-05 01:48:31 +0200 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2015-04-10 11:54:08 -0400 |
| commit | 4bb6650632a3e36185f689c56ea31f189ce39325 (patch) | |
| tree | cc092cb766a332eee797130ccbc9e5266b40fcb5 /common/Makefile | |
| parent | ffb96d55d13759a7e4fe4ba5fc5e3eb6fac11738 (diff) | |
common/armflash: Support for ARM flash images
The ARM reference designs all use a special flash image format
that stores a footer (two versions exist) at the end of the last
erase block of the image in flash memory.
Version one of the footer is indicated by the magic number
0xA0FFFF9F at 12 bytes before the end of the flash block and
version two is indicated by the magic number 0x464F4F54 0x464C5348
(ASCII for "FLSHFOOT") in the very last 8 bytes of the erase block.
This command driver implements support for both versions of the
AFS images (the name comes from the Linux driver in drivers/mtd/afs.c)
and makes it possible to list images and load an image by name into
the memory with these commands:
afs - lists flash contents
afs load <image> - loads image to address indicated in the image
afs load <image> <addres> - loads image to a specified address
This image scheme is used on the ARM Integrator family, ARM
Versatile family, ARM RealView family (not yet supported in U-Boot)
and ARM Versatile Express family up to and including the new
Juno board for 64 bit development.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'common/Makefile')
| -rw-r--r-- | common/Makefile | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/common/Makefile b/common/Makefile index 7216a139223..252fbf194b0 100644 --- a/common/Makefile +++ b/common/Makefile @@ -60,6 +60,7 @@ obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o # command obj-$(CONFIG_CMD_AES) += cmd_aes.o obj-$(CONFIG_CMD_AMBAPP) += cmd_ambapp.o +obj-$(CONFIG_CMD_ARMFLASH) += cmd_armflash.o obj-$(CONFIG_SOURCE) += cmd_source.o obj-$(CONFIG_CMD_SOURCE) += cmd_source.o obj-$(CONFIG_CMD_BDI) += cmd_bdinfo.o |