4xx: Fix compilation warnings and MQ registers dump in SPD DDR2 code

This patch fixes printf format string compilation warnings in several
debug statements. It also fixes the dump of DDR controller MQ registers
found on some 44x and 46x platforms. The current register dump code
uses incorrect DCRs to access these registers.

Signed-off-by: Felix Radensky <felix@embedded-sol.com>
Signed-off-by: Stefan Roese <sr@denx.de>

1 files changed, 25 insertions, 17 deletions

diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 33788cc9006..2ab23365a53 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -60,6 +60,14 @@
 		       "SDRAM_" #mnemonic, SDRAM_##mnemonic, data);	\
 	} while (0)
 
+#define PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(mnemonic)			\
+	do {								\
+		u32 data;						\
+		data = mfdcr(SDRAM_##mnemonic);				\
+		printf("%20s[%02x] = 0x%08X\n",				\
+		       "SDRAM_" #mnemonic, SDRAM_##mnemonic, data);	\
+	} while (0)
+
 #if defined(CONFIG_440)
 /*
  * This DDR2 setup code can dynamically setup the TLB entries for the DDR2
@@ -714,11 +722,11 @@ static void check_mem_type(unsigned long *dimm_populated,
 				spd_ddr_init_hang ();
 				break;
 			case 7:
-				debug("DIMM slot %d: DDR1 SDRAM detected\n", dimm_num);
+				debug("DIMM slot %lu: DDR1 SDRAM detected\n", dimm_num);
 				dimm_populated[dimm_num] = SDRAM_DDR1;
 				break;
 			case 8:
-				debug("DIMM slot %d: DDR2 SDRAM detected\n", dimm_num);
+				debug("DIMM slot %lu: DDR2 SDRAM detected\n", dimm_num);
 				dimm_populated[dimm_num] = SDRAM_DDR2;
 				break;
 			default:
@@ -796,7 +804,7 @@ static void check_frequency(unsigned long *dimm_populated,
 			else
 				cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) +
 					((tcyc_reg & 0x0F)*10);
-			debug("cycle_time=%d [10 picoseconds]\n", cycle_time);
+			debug("cycle_time=%lu [10 picoseconds]\n", cycle_time);
 
 			if  (cycle_time > (calc_cycle_time + 10)) {
 				/*
@@ -1407,7 +1415,7 @@ static void program_mode(unsigned long *dimm_populated,
 
 	mfsdr(SDR0_DDR0, sdr_ddrpll);
 	sdram_freq = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(sdr_ddrpll), 1);
-	debug("sdram_freq=%d\n", sdram_freq);
+	debug("sdram_freq=%lu\n", sdram_freq);
 
 	/*------------------------------------------------------------------
 	 * Handle the timing.  We need to find the worst case timing of all
@@ -1437,7 +1445,7 @@ static void program_mode(unsigned long *dimm_populated,
 
 			/* t_wr_ns = max(t_wr_ns, (unsigned long)dimm_spd[dimm_num][36] >> 2); */ /*  not used in this loop. */
 			cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
-			debug("cas_bit[SPD byte 18]=%02x\n", cas_bit);
+			debug("cas_bit[SPD byte 18]=%02lx\n", cas_bit);
 
 			/* For a particular DIMM, grab the three CAS values it supports */
 			for (cas_index = 0; cas_index < 3; cas_index++) {
@@ -1469,7 +1477,7 @@ static void program_mode(unsigned long *dimm_populated,
 						(((tcyc_reg & 0xF0) >> 4) * 100) +
 						((tcyc_reg & 0x0F)*10);
 				}
-				debug("cas_index=%d: cycle_time_ns_x_100=%d\n", cas_index,
+				debug("cas_index=%lu: cycle_time_ns_x_100=%lu\n", cas_index,
 				      cycle_time_ns_x_100[cas_index]);
 			}
 
@@ -1580,9 +1588,9 @@ static void program_mode(unsigned long *dimm_populated,
 	cycle_3_0_clk = MULDIV64(ONE_BILLION, 100, max_3_0_tcyc_ns_x_100) + 10;
 	cycle_4_0_clk = MULDIV64(ONE_BILLION, 100, max_4_0_tcyc_ns_x_100) + 10;
 	cycle_5_0_clk = MULDIV64(ONE_BILLION, 100, max_5_0_tcyc_ns_x_100) + 10;
-	debug("cycle_3_0_clk=%d\n", cycle_3_0_clk);
-	debug("cycle_4_0_clk=%d\n", cycle_4_0_clk);
-	debug("cycle_5_0_clk=%d\n", cycle_5_0_clk);
+	debug("cycle_3_0_clk=%lu\n", cycle_3_0_clk);
+	debug("cycle_4_0_clk=%lu\n", cycle_4_0_clk);
+	debug("cycle_5_0_clk=%lu\n", cycle_5_0_clk);
 
 	if (sdram_ddr1 == TRUE) { /* DDR1 */
 		if ((cas_2_0_available == TRUE) && (sdram_freq <= cycle_2_0_clk)) {
@@ -2797,13 +2805,13 @@ calibration_loop:
 	}
 
 	mfsdram(SDRAM_DLCR, val);
-	debug("%s[%d] DLCR: 0x%08X\n", __FUNCTION__, __LINE__, val);
+	debug("%s[%d] DLCR: 0x%08lX\n", __FUNCTION__, __LINE__, val);
 	mfsdram(SDRAM_RQDC, val);
-	debug("%s[%d] RQDC: 0x%08X\n", __FUNCTION__, __LINE__, val);
+	debug("%s[%d] RQDC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
 	mfsdram(SDRAM_RFDC, val);
-	debug("%s[%d] RFDC: 0x%08X\n", __FUNCTION__, __LINE__, val);
+	debug("%s[%d] RFDC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
 	mfsdram(SDRAM_RDCC, val);
-	debug("%s[%d] RDCC: 0x%08X\n", __FUNCTION__, __LINE__, val);
+	debug("%s[%d] RDCC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
 }
 #else /* calibration test with hardvalues */
 /*-----------------------------------------------------------------------------+
@@ -3196,10 +3204,10 @@ inline void ppc4xx_ibm_ddr2_register_dump(void)
 
 #if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
      defined(CONFIG_460EX) || defined(CONFIG_460GT))
-	PPC4xx_IBM_DDR2_DUMP_REGISTER(R0BAS);
-	PPC4xx_IBM_DDR2_DUMP_REGISTER(R1BAS);
-	PPC4xx_IBM_DDR2_DUMP_REGISTER(R2BAS);
-	PPC4xx_IBM_DDR2_DUMP_REGISTER(R3BAS);
+	PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R0BAS);
+	PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R1BAS);
+	PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R2BAS);
+	PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R3BAS);
 #endif /* (defined(CONFIG_440SP) || ... */
 #if defined(CONFIG_405EX)
 	PPC4xx_IBM_DDR2_DUMP_REGISTER(BESR);