summaryrefslogtreecommitdiff
path: root/cpu
diff options
context:
space:
mode:
authorJon Loeliger <jdl@freescale.com>2005-08-01 13:20:47 -0500
committerJon Loeliger <jdl@freescale.com>2005-08-01 13:20:47 -0500
commitde1d0a69956a63cea6a62043ae5d5afb584efe93 (patch)
tree1914348ff43c309890deb6ecad206e37b2bc3a51 /cpu
parentb0e32949239c7870d409ca687a2dfc1261a3d838 (diff)
Fix style issues primarily in 85xx and 83xx boards.
- C++ comments - Trailing white space - Indentation not by TAB - Excessive amount of empty lines - Trailing empty lines
Diffstat (limited to 'cpu')
-rw-r--r--cpu/arm920t/s3c24x0/usb_ohci.c6
-rw-r--r--cpu/mpc5xxx/usb_ohci.c6
-rw-r--r--cpu/mpc83xx/cpu_init.c1
-rw-r--r--cpu/mpc83xx/pci.c25
-rw-r--r--cpu/mpc83xx/resetvec.S2
-rw-r--r--cpu/mpc83xx/spd_sdram.c25
-rw-r--r--cpu/mpc83xx/speed.c39
-rw-r--r--cpu/mpc83xx/start.S79
-rw-r--r--cpu/mpc85xx/spd_sdram.c4
9 files changed, 86 insertions, 101 deletions
diff --git a/cpu/arm920t/s3c24x0/usb_ohci.c b/cpu/arm920t/s3c24x0/usb_ohci.c
index fa6abeb546..eb80b1cb56 100644
--- a/cpu/arm920t/s3c24x0/usb_ohci.c
+++ b/cpu/arm920t/s3c24x0/usb_ohci.c
@@ -53,7 +53,6 @@
#define OHCI_USE_NPS /* force NoPowerSwitching mode */
#undef OHCI_VERBOSE_DEBUG /* not always helpful */
-
/* For initializing controller (mask in an HCFS mode too) */
#define OHCI_CONTROL_INIT \
(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
@@ -1221,7 +1220,6 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
}
-
/*-------------------------------------------------------------------------*/
/* common code for handling submit messages - used for all but root hub */
@@ -1294,7 +1292,7 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
wait_ms(1);
if (!urb_finished)
dbg("\%");
-
+
} else {
err("CTL:TIMEOUT ");
dbg("submit_common_msg: TO status %x\n", stat);
@@ -1511,7 +1509,7 @@ hc_interrupt (void)
ohci->disabled++;
err ("%s device removed!", ohci->slot_name);
return -1;
-
+
} else if ((ints &= readl (&regs->intrenable)) == 0) {
dbg("hc_interrupt: returning..\n");
return 0xff;
diff --git a/cpu/mpc5xxx/usb_ohci.c b/cpu/mpc5xxx/usb_ohci.c
index 2f19d7e922..c774da36d1 100644
--- a/cpu/mpc5xxx/usb_ohci.c
+++ b/cpu/mpc5xxx/usb_ohci.c
@@ -1261,7 +1261,7 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
stat = USB_ST_CRC_ERR;
break;
}
-
+
/* NOTE: since we are not interrupt driven in U-Boot and always
* handle only one URB at a time, we cannot assume the
* transaction finished on the first successful return from
@@ -1483,7 +1483,7 @@ hc_interrupt (void)
struct ohci_regs *regs = ohci->regs;
int ints;
int stat = -1;
-
+
if ((ohci->hcca->done_head != 0) &&
!(ohci_cpu_to_le32(ohci->hcca->done_head) & 0x01)) {
@@ -1493,7 +1493,7 @@ hc_interrupt (void)
ohci->disabled++;
err ("%s device removed!", ohci->slot_name);
return -1;
-
+
} else if ((ints &= readl (&regs->intrenable)) == 0) {
dbg("hc_interrupt: returning..\n");
return 0xff;
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 7e80ced393..dcb34457b1 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -161,4 +161,3 @@ int cpu_init_r (void)
{
return 0;
}
-
diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c
index d9daa3e528..d5fa811edf 100644
--- a/cpu/mpc83xx/pci.c
+++ b/cpu/mpc83xx/pci.c
@@ -45,12 +45,12 @@ void
pci_mpc83xx_init(volatile struct pci_controller *hose)
{
volatile immap_t * immr;
- volatile clk8349_t * clk;
+ volatile clk8349_t * clk;
volatile law8349_t * pci_law;
volatile pot8349_t * pci_pot;
volatile pcictrl8349_t * pci_ctrl;
volatile pciconf8349_t * pci_conf;
-
+
u8 val8,tmp8,ret;
u16 reg16,tmp16;
u32 val32,tmp32;
@@ -69,7 +69,7 @@ pci_mpc83xx_init(volatile struct pci_controller *hose)
udelay(2000);
clk->occr = 0xff000000;
udelay(2000);
-
+
/*
* Configure PCI Local Access Windows
*/
@@ -89,7 +89,7 @@ pci_mpc83xx_init(volatile struct pci_controller *hose)
pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_16M & POCMR_CM_MASK);
-//#if defined(CONFIG_PCI_2)
+
pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK;
pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK;
pci_pot[3].pocmr = POCMR_EN | POCMR_DST | (POCMR_CM_512M & POCMR_CM_MASK);
@@ -98,8 +98,7 @@ pci_mpc83xx_init(volatile struct pci_controller *hose)
pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK;
pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK;
pci_pot[4].pocmr = POCMR_EN | POCMR_DST | POCMR_IO | (POCMR_CM_16M & POCMR_CM_MASK);
-//#endif
-
+
/*
* Configure PCI Inbound Translation Windows
*/
@@ -131,13 +130,13 @@ pci_mpc83xx_init(volatile struct pci_controller *hose)
val8 = 0x34;
ret = i2c_write(0x26,0x7,1,&val8,1);
#if defined(PCI_64BIT)
- val8 = 0xf4; // PMC2<->PCI1 64bit
+ val8 = 0xf4; /* PMC2<->PCI1 64bit */
#elif defined(PCI_ALL_PCI1)
- val8 = 0xf3; // PMC1<->PCI1,PMC2<->PCI1,PMC3<->PCI1 32bit
+ val8 = 0xf3; /* PMC1<->PCI1,PMC2<->PCI1,PMC3<->PCI1 32bit */
#elif defined(PCI_ONE_PCI1)
- val8 = 0xf9; // PMC1<->PCI1,PMC2<->PCI2,PMC3<->PCI2 32bit
+ val8 = 0xf9; /* PMC1<->PCI1,PMC2<->PCI2,PMC3<->PCI2 32bit */
#elif defined(PCI_TWO_PCI1)
- val8 = 0xf5; // PMC1<->PCI1,PMC2<->PCI1,PMC3<->PCI2 32bit
+ val8 = 0xf5; /* PMC1<->PCI1,PMC2<->PCI1,PMC3<->PCI2 32bit */
#else
val8 = 0xf5;
#endif
@@ -160,7 +159,7 @@ pci_mpc83xx_init(volatile struct pci_controller *hose)
pci_ctrl[0].gcr = 1;
#ifndef PCI_64BIT
pci_ctrl[1].gcr = 1;
-#endif
+#endif
udelay(2000);
hose[0].first_busno = 0;
@@ -186,7 +185,7 @@ pci_mpc83xx_init(volatile struct pci_controller *hose)
#define PCI_CLASS_BRIDGE 0x06
reg16 = 0xff;
tmp32 = 0xffff;
- pci_hose_write_config_byte(&hose[0],PCI_BDF(0,0,0),PCI_CLASS_CODE,PCI_CLASS_BRIDGE);
+ pci_hose_write_config_byte(&hose[0],PCI_BDF(0,0,0),PCI_CLASS_CODE,PCI_CLASS_BRIDGE);
pci_hose_read_config_word (&hose[0],PCI_BDF(0,0,0),PCI_COMMAND, &reg16);
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
@@ -219,7 +218,7 @@ pci_mpc83xx_init(volatile struct pci_controller *hose)
(CFG_IMMRBAR+0x8380),
(CFG_IMMRBAR+0x8384));
- pci_hose_write_config_byte(&hose[1],PCI_BDF(0,0,0),PCI_CLASS_CODE,PCI_CLASS_BRIDGE);
+ pci_hose_write_config_byte(&hose[1],PCI_BDF(0,0,0),PCI_CLASS_CODE,PCI_CLASS_BRIDGE);
pci_hose_read_config_word (&hose[1],PCI_BDF(0,0,0), PCI_COMMAND, &reg16);
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
pci_hose_write_config_word(&hose[1],PCI_BDF(0,0,0), PCI_COMMAND, reg16);
diff --git a/cpu/mpc83xx/resetvec.S b/cpu/mpc83xx/resetvec.S
index 7593e73213..3dfcd0dcd5 100644
--- a/cpu/mpc83xx/resetvec.S
+++ b/cpu/mpc83xx/resetvec.S
@@ -2,5 +2,5 @@
#ifndef FIXME
#if 0
b _start_e500
-#endif
+#endif
#endif
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 5bd112ce6e..63dcd664be 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -36,20 +36,16 @@
#ifdef CONFIG_SPD_EEPROM
-
#if defined(CONFIG_DDR_ECC)
extern void dma_init(void);
extern uint dma_check(void);
extern int dma_xfer(void *dest, uint count, void *src);
#endif
-
#ifndef CFG_READ_SPD
#define CFG_READ_SPD i2c_read
#endif
-
-
/*
* Convert picoseconds into clock cycles (rounding up if needed).
*/
@@ -67,14 +63,12 @@ picos_to_clk(int picos)
return clks;
}
-
unsigned int
banksize(unsigned char row_dens)
{
return ((row_dens >> 2) | ((row_dens & 3) << 6)) << 24;
}
-
long int spd_sdram(int(read_spd)(uint addr))
{
volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
@@ -86,8 +80,8 @@ long int spd_sdram(int(read_spd)(uint addr))
unsigned int law_size;
unsigned char caslat;
unsigned int trfc, trfc_clk, trfc_low;
-
-#warning Current spd_sdram does not fit its usage... adjust implementation or API...
+
+#warning Current spd_sdram does not fit its usage... adjust implementation or API...
CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
@@ -111,7 +105,7 @@ long int spd_sdram(int(read_spd)(uint addr))
debug("\n");
debug("cs2_bnds = 0x%08x\n",ddr->csbnds[2].csbnds);
debug("cs2_config = 0x%08x\n",ddr->cs_config[2]);
-
+
if (spd.nrows == 2) {
ddr->csbnds[3].csbnds = ( (banksize(spd.row_dens) >> 8)
| ((banksize(spd.row_dens) >> 23) - 1) );
@@ -298,9 +292,12 @@ long int spd_sdram(int(read_spd)(uint addr))
udelay(500);
-
- ddr->sdram_clk_cntl = 0x82000000;/*SS_EN=1, CLK_ADJST = 2-MCK/MCK_B, is lauched 1/2 of one SDRAM clock cycle after address/command*/
-
+ /*
+ * SS_EN=1,
+ * CLK_ADJST = 2-MCK/MCK_B, is lauched 1/2 of one SDRAM
+ * clock cycle after address/command
+ */
+ ddr->sdram_clk_cntl = 0x82000000;
/*
* Figure out the settings for the sdram_cfg register. Build up
@@ -339,7 +336,6 @@ long int spd_sdram(int(read_spd)(uint addr))
#endif
ddr->sdram_cfg = tmp;
-
asm("sync;isync");
udelay(500);
@@ -347,7 +343,6 @@ long int spd_sdram(int(read_spd)(uint addr))
return memsize;/*in MBytes*/
}
-
#endif /* CONFIG_SPD_EEPROM */
@@ -407,7 +402,7 @@ ddr_enable_ecc(unsigned int dram_size)
*/
ddr->err_disable = 0x00000000;
asm("sync;isync");
-#endif
+#endif
}
#endif /* CONFIG_DDR_ECC */
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index 6530fbfd3f..260137da82 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -101,7 +101,7 @@ int get_clocks (void)
u32 corecnf_tab_index;
u8 corepll;
u32 lcrr;
-
+
u32 csb_clk;
u32 tsec1_clk;
u32 tsec2_clk;
@@ -113,10 +113,10 @@ int get_clocks (void)
u32 lbiu_clk;
u32 lclk_clk;
u32 ddr_clk;
-
+
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
return -1;
-
+
#ifndef CFG_HRCW_HIGH
# error "CFG_HRCW_HIGH must be defined in include/configs/MCP83XXADS.h"
#endif /* CFG_HCWD_HIGH */
@@ -133,7 +133,6 @@ int get_clocks (void)
/* though RCWH_PCIHOST is defined in CFG_HRCW_HIGH the im->reset.rcwhr PCI Host Mode is disabled */
/* FIXME: findout if there is a way to issue some warning */
return -2;
-
}
if (im->clk.spmr & SPMR_CKID) {
pci_sync_in = CONFIG_83XX_CLKIN / 2; /* PCI Clock is half CONFIG_83XX_CLKIN */
@@ -157,17 +156,16 @@ int get_clocks (void)
#endif /* (CFG_HRCW_HIGH | RCWH_PCIHOST) */
/* we have up to date pci_sync_in */
-
spmf = ((im->reset.rcwl & RCWL_SPMF) >> RCWL_SPMF_SHIFT);
clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
-
+
if ((im->reset.rcwl & RCWL_LBIUCM) || (im->reset.rcwl & RCWL_DDRCM)) {
csb_clk = (pci_sync_in * spmf * (1 + clkin_div)) / 2;
}
else {
csb_clk = pci_sync_in * spmf * (1 + clkin_div);
}
-
+
sccr = im->clk.sccr;
switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
case 0:
@@ -186,7 +184,7 @@ int get_clocks (void)
/* unkown SCCR_TSEC1CM value */
return -4;
}
-
+
switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
case 0:
tsec2_clk = 0;
@@ -205,7 +203,7 @@ int get_clocks (void)
return -5;
}
i2c_clk = tsec2_clk;
-
+
switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
case 0:
enc_clk = 0;
@@ -223,7 +221,7 @@ int get_clocks (void)
/* unkown SCCR_ENCCM value */
return -6;
}
-
+
switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) {
case 0:
usbmph_clk = 0;
@@ -259,14 +257,14 @@ int get_clocks (void)
/* unkown SCCR_USBDRCM value */
return -8;
}
-
+
if (usbmph_clk != 0
&& usbdr_clk != 0
&& usbmph_clk != usbdr_clk ) {
/* if USB MPH clock is not disabled and USB DR clock is not disabled than USB MPH & USB DR must have the same rate */
return -9;
}
-
+
lbiu_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
switch (lcrr) {
@@ -279,9 +277,9 @@ int get_clocks (void)
/* unknown lcrr */
return -10;
}
-
+
ddr_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT));
-
+
corepll = (im->reset.rcwl & RCWL_COREPLL) >> RCWL_COREPLL_SHIFT;
corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5);
if (corecnf_tab_index > (sizeof(corecnf_tab)/sizeof(corecnf_t)) ) {
@@ -310,7 +308,7 @@ int get_clocks (void)
/* unkown core to csb ratio */
return -12;
}
-
+
gd->csb_clk = csb_clk ;
gd->tsec1_clk = tsec1_clk ;
gd->tsec2_clk = tsec2_clk ;
@@ -318,11 +316,11 @@ int get_clocks (void)
gd->usbmph_clk = usbmph_clk;
gd->usbdr_clk = usbdr_clk ;
gd->i2c_clk = i2c_clk ;
- gd->enc_clk = enc_clk ;
+ gd->enc_clk = enc_clk ;
gd->lbiu_clk = lbiu_clk ;
gd->lclk_clk = lclk_clk ;
gd->ddr_clk = ddr_clk ;
-
+
gd->cpu_clk = gd->core_clk;
gd->bus_clk = gd->lbiu_clk;
return 0;
@@ -341,7 +339,7 @@ ulong get_bus_freq (ulong dummy)
int print_clock_conf (void)
{
DECLARE_GLOBAL_DATA_PTR;
-
+
printf("Clock configuration:\n");
printf(" Coherent System Bus: %4d MHz\n",gd->csb_clk/1000000);
printf(" Core: %4d MHz\n",gd->core_clk/1000000);
@@ -353,7 +351,7 @@ int print_clock_conf (void)
printf(" TSEC2: %4d MHz\n",gd->tsec2_clk/1000000);
printf(" USB MPH: %4d MHz\n",gd->usbmph_clk/1000000);
printf(" USB DR: %4d MHz\n",gd->usbdr_clk/1000000);
-
+
#if 0
DECLARE_GLOBAL_DATA_PTR;
@@ -419,6 +417,5 @@ int print_clock_conf (void)
}
putc ('\n');
#endif
- return (0);
+ return 0;
}
-
diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S
index e9f07901b8..fb001a654c 100644
--- a/cpu/mpc83xx/start.S
+++ b/cpu/mpc83xx/start.S
@@ -28,7 +28,7 @@
*/
#include <config.h>
-#include <mpc83xx.h>
+#include <mpc83xx.h>
#include <version.h>
#define CONFIG_83XX 1 /* needed for Linux kernel header files*/
@@ -89,7 +89,7 @@ version_string:
.ascii U_BOOT_VERSION
.ascii " (", __DATE__, " - ", __TIME__, ")"
.ascii " ", CONFIG_IDENT_STRING, "\0"
-
+
.text
#define _HRCW_TABLE_ENTRY(w) \
.fill 8,1,(((w)>>24)&0xff); \
@@ -101,7 +101,6 @@ version_string:
_HRCW_TABLE_ENTRY(CFG_HRCW_HIGH)
-
#ifndef CONFIG_DEFAULT_IMMR
#error CONFIG_DEFAULT_IMMR must be defined
#endif /* CFG_DEFAULT_IMMR */
@@ -143,7 +142,7 @@ _start: /* time t 0 */
. = EXC_OFF_SYS_RESET + 0x10
.globl _start_warm
-_start_warm:
+_start_warm:
li r21, BOOTFLAG_WARM /* Software reboot */
b boot_warm
@@ -156,12 +155,12 @@ boot_warm: /* time t 5 */
lis r3, CFG_IMMRBAR@h
ori r3, r3, CFG_IMMRBAR@l
stw r3, IMMRBAR(r4)
-
+
/* Initialise the E300 processor core */
/*------------------------------------------*/
-
+
bl init_e300_core
-
+
#ifndef CFG_RAMBOOT
/* Inflate flash location so it appears everywhere, calculate */
@@ -218,7 +217,7 @@ _start_of_vectors:
/* External Interrupt exception. */
#ifndef FIXME
STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-#endif
+#endif
/* Alignment exception. */
. = 0x600
@@ -417,9 +416,9 @@ init_e300_core: /* time t 10 */
lis r4, CFG_WATCHDOG_VALUE
ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
stw r4, SWCRR(r3)
-
+
/* and reset it */
-
+
li r4, 0x556C
sth r4, SWSRR@l(r3)
li r4, 0xAA39
@@ -502,7 +501,7 @@ init_e300_core: /* time t 10 */
/* Done! */
/*------------------------------*/
- blr
+ blr
/* Cache functions.
*
@@ -645,8 +644,8 @@ relocate_code:
mtctr r0
la r8,-4(r4)
la r7,-4(r3)
-
- /* and compare */
+
+ /* and compare */
20: lwzu r20,4(r8)
lwzu r21,4(r7)
xor. r22, r20, r21
@@ -664,21 +663,19 @@ relocate_code:
3: lwzu r0,-4(r8)
stwu r0,-4(r7)
bdnz 3b
-
-
/*
* Now flush the cache: note that we must start from a cache aligned
* address. Otherwise we might miss one cache line.
*/
-4:
+4:
bl un_setup_stack_in_data_cache
mr r7, r3
mr r8, r4
bl dcache_disable
mr r3, r7
mr r4, r8
-
+
cmpwi r6,0
add r5,r3,r5
beq 7f /* Always flush prefetch queue in any case */
@@ -889,9 +886,9 @@ map_flash_by_law1:
/* Address Mask in OR0 so ROM appears everywhere */
/*----------------------------------------------------*/
lis r3, (CFG_IMMRBAR)@h /* r3 <= CFG_IMMRBAR */
- lwz r4, OR0@l(r3)
+ lwz r4, OR0@l(r3)
li r5, 0x7fff /* r5 <= 0x00007FFFF */
- and r4, r4, r5
+ and r4, r4, r5
stw r4, OR0@l(r3) /* OR0 <= OR0 & 0x00007FFFF */
/* As MPC8349E User's Manual presented, when RCW[BMS] is set to 0,
@@ -926,9 +923,9 @@ remap_flash_by_law0:
/* Initialize the BR0 with the boot ROM starting address. */
lwz r4, BR0(r3)
li r5, 0x7FFF
- and r4, r4, r5
+ and r4, r4, r5
lis r5, (CFG_FLASH_BASE & 0xFFFF8000)@h
- ori r5, r5, (CFG_FLASH_BASE & 0xFFFF8000)@l
+ ori r5, r5, (CFG_FLASH_BASE & 0xFFFF8000)@l
or r5, r5, r4
stw r5, BR0(r3) /* r5 <= (CFG_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */
@@ -950,9 +947,9 @@ remap_flash_by_law0:
stw r4, LBLAWAR1(r3) /* Off LBIU LAW1 */
blr
-setup_stack_in_data_cache_on_r1:
+setup_stack_in_data_cache_on_r1:
lis r3, (CFG_IMMRBAR)@h
-
+
/* setup D-BAT for the D-Cache (with out real memory backup) */
lis r4, (CFG_INIT_RAM_ADDR & 0xFFFE0000)@h
@@ -961,13 +958,13 @@ setup_stack_in_data_cache_on_r1:
mtspr DBAT0L, r4
isync
-#if 0
+#if 0
/* Enable MMU */
mfmsr r4
ori r4, r4, (MSR_DR | MSR_IR)@l
mtmsr r4
-#endif
-
+#endif
+
/* Enable and invalidate data cache. */
mfspr r4, HID0
mr r5, r4
@@ -977,19 +974,19 @@ setup_stack_in_data_cache_on_r1:
mtspr HID0, r4
mtspr HID0, r5
sync
-
+
/* Allocate Initial RAM in data cache.*/
li r0, 0
lis r4, (CFG_INIT_RAM_ADDR)@h
ori r4, r4, (CFG_INIT_RAM_ADDR)@l
- li r5, 128*8 /* 128*8*32=32Kb */
+ li r5, 128*8 /* 128*8*32=32Kb */
mtctr r5
1:
dcbz r0, r4
addi r4, r4, 32
bdnz 1b
isync
-
+
/* Lock all the D-cache, basically leaving the reset of the program without dcache */
mfspr r4, HID0
ori r4, r4, (HID0_DLOCK)@l
@@ -1010,14 +1007,14 @@ un_setup_stack_in_data_cache:
blr
mr r14, r4
mr r15, r5
-
+
lis r4, (CFG_INIT_RAM_ADDR & 0xFFFE0000)@h
mtspr DBAT0U, r4
ori r4, r4, 0x0002
mtspr DBAT0L, r4
isync
-
+
/* un lock all the D-cache */
mfspr r4, HID0
lis r5, (~(HID0_DLOCK))@h
@@ -1030,20 +1027,20 @@ un_setup_stack_in_data_cache:
li r0, 0
lis r4, (CFG_INIT_RAM_ADDR)@h
ori r4, r4, (CFG_INIT_RAM_ADDR)@l
- li r5, 128*8 /* 128*8*32=32Kb */
+ li r5, 128*8 /* 128*8*32=32Kb */
mtctr r5
1:
dcbz r0, r4
addi r4, r4, 32
bdnz 1b
isync
-
+
mflr r16
bl dcache_disable
mtlr r16
-
+
blr
-
+
#if 0
#define GREEN_LIGHT 0x2B0D4046
#define RED_LIGHT 0x250D4046
@@ -1054,7 +1051,7 @@ un_setup_stack_in_data_cache:
*/
.globl liblight
-liblight:
+liblight:
lis r3, CFG_IMMRBAR@h
ori r3, r3, CFG_IMMRBAR@l
li r4, 0x3002
@@ -1063,7 +1060,7 @@ liblight:
mtspr HID0, r4
mtspr HID2, r4
lis r4, 0xF8000000@h
- ori r4, r4, 0xF8000000@l
+ ori r4, r4, 0xF8000000@l
stw r4, LBLAWBAR1(r3)
lis r4, 0x8000000E@h
ori r4, r4, 0x8000000E@l
@@ -1083,14 +1080,14 @@ liblight:
ori r6, r6, RED_LIGHT@l
lis r7, LIB_CNT@h
ori r7, r7, LIB_CNT@l
-
+
1:
stw r5, 0(r4)
- mtctr r7
+ mtctr r7
2: bdnz 2b
stw r6, 0(r4)
- mtctr r7
+ mtctr r7
3: bdnz 3b
b 1b
-
+
#endif
diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c
index 049ba67e45..af99282dd9 100644
--- a/cpu/mpc85xx/spd_sdram.c
+++ b/cpu/mpc85xx/spd_sdram.c
@@ -630,7 +630,7 @@ spd_sdram(void)
ddr->timing_cfg_2 = (0
| ((add_lat & 0x7) << 28) /* ADD_LAT */
- | ((cpo & 0x1f) << 23) /* CPO */
+ | ((cpo & 0x1f) << 23) /* CPO */
| ((wr_lat & 0x7) << 19) /* WR_LAT */
| ((trtp_clk & 0x7) << 13) /* RD_TO_PRE */
| ((wr_data_delay & 0x7) << 10) /* WR_DATA_DELAY */
@@ -822,7 +822,7 @@ spd_sdram(void)
/*
* Memory will be initialized via DMA, or not at all.
*/
- d_init = 0;
+ d_init = 0;
#endif
ddr->sdram_cfg_2 = (0