Patch by Florian Schlote, 08 Sep 2004:

Add support for SenTec-COBRA5272-board (Coldfire).

1 files changed, 156 insertions, 0 deletions

diff --git a/doc/README.COBRA5272 b/doc/README.COBRA5272
new file mode 100644
index 00000000000..2d3f7067c3d
--- /dev/null
+++ b/doc/README.COBRA5272
@@ -0,0 +1,156 @@
+File:		README.COBRA5272
+Author:		Florian Schlote for Sentec elektronik (linux@sentec-elektronik.de)
+Contents:	This is the README of u-boot (Universal bootloader) for our
+		COBRA5272 board.
+Version:	v01.00
+Date:		Tue Mar 30 00:28:33 CEST 2004
+License:	This document is published under the GNU GPL
+______________________________________________________________________
+
+CHANGES
+040330   v01.00 Creation
+
+______________________________________________________________________
+
+
+CONFIGURING
+-----------
+
+1. Modify include/configs/cobra5272.h acc. to your prefs
+
+2. If necessary, modify board/cobra5272/config.mk (see below)
+
+3.
+
+> make cobra5272_config
+
+> make
+
+
+Please refer to u-boot README (general info, u-boot-x-x-x/README),
+to u-boot-x-x-x/doc/README.COBRA5272 and
+to the comments in u-boot-x-x-x/include/configs/cobra5272.h
+
+Configuring u-boot is done by commenting/uncommenting preprocessor defines.
+
+Default configuration is
+
+	FLASH version (for further info see subsection below)
+	link address 0xffe00000
+
+	16 MB RAM
+
+	network enabled
+	no default IP address for target, host set, no MACaddress set
+
+	bootdelay for autoboot 5 sec.
+	autoboot disabled
+
+
+#-----------------------------------
+# u-boot FLASH version & RAM version
+#-----------------------------------
+
+The u-boot bootloader for Coldfire processors can be configured
+
+	1. as a standalone bootloader residing in flash & relocating itself to RAM on
+	startup automatically => "FLASH version"
+
+	2. as a RAM version which will not load from flash automatically as it needs a
+	prestage bootloader ("chainloading") & is running only from the RAM address it
+	is linked to => "RAM version"
+
+	This version may be very helpful when installing u-boot for the first time
+	since it can be used to make available s. th. like a "bootstrap
+	mechanism".
+
+
+How to build the different images:
+
+------------------------------
+Flash version
+------------------------------
+
+Compile u-boot
+
+in dir ./u-boot-x-x-x/
+
+please first check:
+
+	in ./include/configs/cobra5272.h
+
+		CONFIG_MONITOR_IS_IN_RAM has to be undefined, e. g. as follows:
+
+		#if 0
+			#define CONFIG_MONITOR_IS_IN_RAM
+			/* define if monitor is started from a pre-loader */
+		#endif
+
+	=> u-boot as single bootloader starting from flash
+
+
+	in board/cobra5272/config.mk TEXT_BASE should be
+
+		TEXT_BASE = 0xffe00000
+
+	=> linking address for u-boot as single bootloader stored in flash
+
+then:
+
+	host> make cobra5272_config
+		rm -f include/config.h include/config.mk
+		Configuring for cobra5272 board...
+	host> make
+		[...]
+
+	host> cp u-boot.bin /tftpboot/u-boot_flash.bin
+
+
+------------------------------
+RAM version
+------------------------------
+
+in dir ./u-boot-x-x-x/
+
+	host> make distclean
+
+please modify the settings:
+
+	in ./include/configs/cobra5272.h
+
+		CONFIG_MONITOR_IS_IN_RAM now has to be defined, e. g. as follows:
+
+		#if 1
+			#define CONFIG_MONITOR_IS_IN_RAM
+			/*define if monitor is started from a pre-loader */
+		#endif
+
+	=> u-boot as RAM version, chainloaded by another bootloader or using bdm cable
+
+
+	in board/cobra5272/config.mk TEXT_BASE should be
+
+		TEXT_BASE = 0x00020000
+
+	=> target linking address for RAM
+
+
+then:
+
+	host> make cobra5272_config
+		rm -f include/config.h include/config.mk
+		Configuring for cobra5272 board...
+	host> make
+		[...]
+
+	host> cp u-boot.bin /tftpboot/u-boot_ram.bin
+
+
+----
+HINT
+----
+
+If the m68k-elf-toolchain & the m68k-bdm-gdb is installed you can run the RAM
+version by typing (in dir ./u-boot-x-x-x/)
+"board/cobra5272/bdm/load-cobra_uboot" ,
+in ./u-boot-x-x-x/ the RAM version u-boot (elf format) has to be available.