summaryrefslogtreecommitdiff
path: root/doc/README.nand
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2006-10-28 15:55:52 +0200
committerStefan Roese <sr@denx.de>2006-10-28 17:11:10 +0200
commit856f054410cef52d868feb330168b2a4c4091328 (patch)
tree75995d4bfa2f99852917e5ca035406dd91f6953f /doc/README.nand
parent07a69a18c2ecfda904231fdf23e2523ea7792eb6 (diff)
[PATCH] NAND: Partition name support added to NAND subsystem
chpart, nboot and NAND subsystem related commands now accept also partition name to specify offset. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'doc/README.nand')
-rw-r--r--doc/README.nand29
1 files changed, 17 insertions, 12 deletions
diff --git a/doc/README.nand b/doc/README.nand
index 5279a4f2bc5..b5171f4d407 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -34,14 +34,19 @@ Commands:
nand device num
Make device `num' the current device and print information about it.
- nand erase off size
- nand erase clean [off size]
- Erase `size' bytes starting at offset `off'. Only complete erase
- blocks can be erased.
+ nand erase off|partition size
+ nand erase clean [off|partition size]
+ Erase `size' bytes starting at offset `off'. Alternatively partition
+ name can be specified, in this case size will be eventually limited
+ to not exceed partition size (this behaviour applies also to read
+ and write commands). Only complete erase blocks can be erased.
+
+ If `erase' is specified without an offset or size, the entire flash
+ is erased. If `erase' is specified with partition but without an
+ size, the entire partition is erased.
If `clean' is specified, a JFFS2-style clean marker is written to
- each block after it is erased. If `clean' is specified without an
- offset or size, the entire flash is erased.
+ each block after it is erased.
This command will not erase blocks that are marked bad. There is
a debug option in cmd_nand.c to allow bad blocks to be erased.
@@ -51,28 +56,28 @@ Commands:
nand info
Print information about all of the NAND devices found.
- nand read addr ofs size
+ nand read addr ofs|partition size
Read `size' bytes from `ofs' in NAND flash to `addr'. If a page
cannot be read because it is marked bad or an uncorrectable data
error is found the command stops with an error.
- nand read.jffs2 addr ofs size
+ nand read.jffs2 addr ofs|partition size
Like `read', but the data for blocks that are marked bad is read as
0xff. This gives a readable JFFS2 image that can be processed by
the JFFS2 commands such as ls and fsload.
- nand read.oob addr ofs size
+ nand read.oob addr ofs|partition size
Read `size' bytes from the out-of-band data area corresponding to
`ofs' in NAND flash to `addr'. This is limited to the 16 bytes of
data for one 512-byte page or 2 256-byte pages. There is no check
for bad blocks or ECC errors.
- nand write addr ofs size
+ nand write addr ofs|partition size
Write `size' bytes from `addr' to `ofs' in NAND flash. If a page
cannot be written because it is marked bad or the write fails the
command stops with an error.
- nand write.jffs2 addr ofs size
+ nand write.jffs2 addr ofs|partition size
Like `write', but blocks that are marked bad are skipped and the
is written to the next block instead. This allows writing writing
a JFFS2 image, as long as the image is short enough to fit even
@@ -80,7 +85,7 @@ Commands:
produced by mkfs.jffs2 should work well, but loading an image copied
from another flash is going to be trouble if there are any bad blocks.
- nand write.oob addr ofs size
+ nand write.oob addr ofs|partition size
Write `size' bytes from `addr' to the out-of-band data area
corresponding to `ofs' in NAND flash. This is limited to the 16 bytes
of data for one 512-byte page or 2 256-byte pages. There is no check