summaryrefslogtreecommitdiff
path: root/doc/README.uniphier
diff options
context:
space:
mode:
authorMasahiro Yamada <yamada.masahiro@socionext.com>2016-02-16 17:08:41 +0900
committerMasahiro Yamada <yamada.masahiro@socionext.com>2016-02-29 03:50:16 +0900
commitc231c4367ace6574e27ff0d1844d163fc471287b (patch)
tree293c5a005ed85d2729ca1f0832822c9073d9ba8c /doc/README.uniphier
parent569e4be172d1bf2041e97c0b65f872a7451b178a (diff)
ARM: uniphier: add emmcupdate command
The Boot ROM expects the boot image (SPL) in the Boot Partition 1. So, updating images involves the hardware partition switch. It might be a bit advanced for some users. To be user-friendly, this commit adds a useful command to update the images; just put SPL and U-Boot proper into the public directory of the TFTP server and execute "run emmcupdate" from the command line. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Diffstat (limited to 'doc/README.uniphier')
-rw-r--r--doc/README.uniphier14
1 files changed, 14 insertions, 0 deletions
diff --git a/doc/README.uniphier b/doc/README.uniphier
index c270ecb9a5b..5ac52bd41f2 100644
--- a/doc/README.uniphier
+++ b/doc/README.uniphier
@@ -78,6 +78,20 @@ directory, and then run the following command at the U-Boot command line:
=> run nandupdate
+Burn U-Boot images to eMMC
+--------------------------
+
+Write two files to the Boot partition 1 of the eMMC device as follows:
+ - spl/u-boot-spl.bin at the offset address 0x00000000
+ - u-boot.img at the offset address 0x00010000
+
+If a TFTP server is available, the images can be easily updated.
+Just copy the u-boot-spl-dtb.bin and u-boot-dtb.img to the TFTP public
+directory, and then run the following command at the U-Boot command line:
+
+ => run emmcupdate
+
+
UniPhier specific commands
--------------------------