atmel: Bring in at91 pio4 device tree file and bindings

Bring in required device tree file and bindings from Linux.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

1 files changed, 66 insertions, 0 deletions

diff --git a/doc/device-tree-bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/doc/device-tree-bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
new file mode 100644
index 00000000000..a1b559668ff
--- /dev/null
+++ b/doc/device-tree-bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
@@ -0,0 +1,66 @@
+* Atmel PIO4 Controller
+
+The Atmel PIO4 controller is used to select the function of a pin and to
+configure it.
+
+Required properties:
+- compatible: "atmel,sama5d2-pinctrl".
+- reg: base address and length of the PIO controller.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices.
+
+Subnode format
+Each node (or subnode) will list the pins it needs and how to configured these
+pins.
+
+	node {
+		pinmux = <PIN_NUMBER_PINMUX>;
+		GENERIC_PINCONFIG;
+	};
+
+Required properties:
+- pinmux: integer array. Each integer represents a pin number plus mux and
+ioset settings. Use the macros from boot/dts/<soc>-pinfunc.h file to get the
+right representation of the pin.
+
+Optional properties:
+- GENERIC_PINCONFIG: generic pinconfig options to use, bias-disable,
+bias-pull-down, bias-pull-up, drive-open-drain, input-schmitt-enable,
+input-debounce.
+
+Example:
+
+#include <sama5d2-pinfunc.h>
+
+...
+{
+	spi0: spi@f8000000 {
+		cs-gpios = <&pioA 17 0>, <0>, <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi0_default>;
+		status = "okay";
+
+		spi_flash@0 {
+			compatible = "spi-flash";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+		};
+	};
+
+	...
+
+	pioA: pinctrl@fc038000 {
+		compatible = "atmel,sama5d2-pinctrl";
+		reg = <0xfc038000 0x600>;
+
+		pinctrl_spi0_default: spi0_default {
+			pinmux = <PIN_PA14__SPI0_SPCK>,
+				 <PIN_PA15__SPI0_MOSI>,
+				 <PIN_PA16__SPI0_MISO>;
+			bias-disable;
+		};
+		...
+	};
+};
+...