diff options
| author | Fabio Estevam <fabio.estevam@freescale.com> | 2013-05-03 15:08:01 -0300 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2013-06-26 17:40:39 +0200 |
| commit | 17f3f366528230da68e08b3b01a048fefa4c5752 (patch) | |
| tree | 9f21ccbfba8284e0edf6dba276fb2dd5e763c53a /doc | |
| parent | 54965b61360f888bd576b80fe8c4e3882616479f (diff) | |
mx28evk: Move README file inside board directory
Board specific READMEs should be located inside the respective board directory.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/README.mx28evk | 46 |
1 files changed, 0 insertions, 46 deletions
diff --git a/doc/README.mx28evk b/doc/README.mx28evk deleted file mode 100644 index 524f3fc4945..00000000000 --- a/doc/README.mx28evk +++ /dev/null @@ -1,46 +0,0 @@ -FREESCALE MX28EVK -================== - -Supported hardware: only MX28EVK rev D is supported in U-boot. - -Files of the MX28EVK port --------------------------- - -arch/arm/cpu/arm926ejs/mxs/ - The CPU support code for the Freescale i.MX28 -arch/arm/include/asm/arch-mxs/ - Header files for the Freescale i.MX28 -board/freescale/mx28evk/ - MX28EVK board specific files -include/configs/mx28evk.h - MX28EVK configuration file - -Jumper configuration ---------------------- - -To boot MX28EVK from an SD card, set the boot mode DIP switches as: - - * Boot Mode Select: 1 0 0 1 (Boot from SD card Slot 0 - U42) - * JTAG PSWITCH RESET: To the right (reset disabled) - * Battery Source: Down - * Wall 5V: Up - * VDD 5V: To the left (off) - * Hold Button: Down (off) - - -Environment Storage -------------------- - -There are two targets for mx28evk: - -"make mx28evk_config" - store enviroment variables into MMC - -or - -"make mx28evk_nand_config" - store enviroment variables into NAND flash - -Choose the target accordingly. - -Note: The mx28evk board does not come with a NAND flash populated from the -factory. It comes with an empty slot (U23), which allows the insertion of a -48-pin TSOP flash device. - -Follow the instructions from doc/README.mxs to generate a bootable SD card. - -Insert the SD card in slot 0, power up the board and U-boot will boot. |