serial: omap: Introduce DM specific omap serial

Add driver model support for OMAP_SERIAL while reusing
the functions in ns16550.c

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>

1 files changed, 126 insertions, 0 deletions

diff --git a/drivers/serial/serial_omap.c b/drivers/serial/serial_omap.c
new file mode 100644
index 0000000000..d8a047bb71
--- /dev/null
+++ b/drivers/serial/serial_omap.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Texas Instruments' OMAP serial driver
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Lokesh Vutla <lokeshvutla@ti.com>
+ */
+
+#include <common.h>
+#include <debug_uart.h>
+#include <dm.h>
+#include <dt-structs.h>
+#include <ns16550.h>
+#include <serial.h>
+#include <clk.h>
+
+#ifndef CONFIG_SYS_NS16550_CLK
+#define CONFIG_SYS_NS16550_CLK  0
+#endif
+
+#ifdef CONFIG_DEBUG_UART_OMAP
+
+#include <debug_uart.h>
+
+static inline void _debug_uart_init(void)
+{
+	struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
+	int baud_divisor;
+
+	baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK,
+					    CONFIG_BAUDRATE);
+	serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER);
+	serial_dout(&com_port->mdr1, 0x7);
+	serial_dout(&com_port->mcr, UART_MCRVAL);
+	serial_dout(&com_port->fcr, UART_FCR_DEFVAL);
+
+	serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL);
+	serial_dout(&com_port->dll, baud_divisor & 0xff);
+	serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff);
+	serial_dout(&com_port->lcr, UART_LCRVAL);
+	serial_dout(&com_port->mdr1, 0x0);
+}
+
+static inline void _debug_uart_putc(int ch)
+{
+	struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
+
+	while (!(serial_din(&com_port->lsr) & UART_LSR_THRE))
+		;
+	serial_dout(&com_port->thr, ch);
+}
+
+DEBUG_UART_FUNCS
+
+#endif
+
+#if CONFIG_IS_ENABLED(DM_SERIAL)
+
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
+static int omap_serial_ofdata_to_platdata(struct udevice *dev)
+{
+	struct ns16550_platdata *plat = dev->platdata;
+	fdt_addr_t addr;
+	struct clk clk;
+	int err;
+
+	/* try Processor Local Bus device first */
+	addr = dev_read_addr(dev);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE);
+
+	plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0);
+	plat->reg_shift = 2;
+
+	err = clk_get_by_index(dev, 0, &clk);
+	if (!err) {
+		err = clk_get_rate(&clk);
+		if (!IS_ERR_VALUE(err))
+			plat->clock = err;
+	} else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) {
+		debug("omap serial failed to get clock\n");
+		return err;
+	}
+
+	if (!plat->clock)
+		plat->clock = dev_read_u32_default(dev, "clock-frequency",
+						   CONFIG_SYS_NS16550_CLK);
+	if (!plat->clock) {
+		debug("omap serial clock not defined\n");
+		return -EINVAL;
+	}
+
+	plat->fcr = UART_FCR_DEFVAL;
+
+	return 0;
+}
+
+static const struct udevice_id omap_serial_ids[] = {
+	{ .compatible = "ti,omap2-uart", },
+	{ .compatible = "ti,omap3-uart", },
+	{ .compatible = "ti,omap4-uart", },
+	{ .compatible = "ti,am3352-uart", },
+	{ .compatible = "ti,am4372-uart", },
+	{ .compatible = "ti,dra742-uart", },
+	{}
+};
+#endif /* OF_CONTROL && !OF_PLATDATA */
+
+#if CONFIG_IS_ENABLED(SERIAL_PRESENT)
+U_BOOT_DRIVER(omap_serial) = {
+	.name	= "omap_serial",
+	.id	= UCLASS_SERIAL,
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
+	.of_match = omap_serial_ids,
+	.ofdata_to_platdata = omap_serial_ofdata_to_platdata,
+	.platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
+#endif
+	.priv_auto_alloc_size = sizeof(struct NS16550),
+	.probe = ns16550_serial_probe,
+	.ops	= &ns16550_serial_ops,
+	.flags	= DM_FLAG_PRE_RELOC,
+};
+#endif
+#endif /* DM_SERIAL */