Rewrite the miiphybb (Bit-banged MII bus driver) in order to support an arbitrary number of mii buses.

This feature is useful when your board uses different mii buses for different
phys and all (or a part) of these buses are implemented via bit-banging mode.

The driver requires that the following macros should be defined into the board
configuration file:

CONFIG_BITBANGMII       - Enable the miiphybb driver
CONFIG_BITBANGMII_MULTI - Enable the multi bus support

If the CONFIG_BITBANGMII_MULTI is not defined, the board's config file needs
to define at least the following macros:

MII_INIT      - Generic code to enable the MII bus (optional)
MDIO_DECLARE  - Declaration needed to access to the MDIO pin (optional)
MDIO_ACTIVE   - Activate the MDIO pin as out pin
MDIO_TRISTATE - Activate the MDIO pin as input/tristate pin
MDIO_READ     - Read the MDIO pin
MDIO(v)       - Write v on the MDIO pin
MDC_DECLARE   - Declaration needed to access to the MDC pin (optional)
MDC(v)        - Write v on the MDC pin

The previous macros make the driver compatible with the previous version
(that didn't support the multi-bus).

When the CONFIG_BITBANGMII_MULTI is also defined, the board code needs to fill
the bb_miiphy_buses[] array with a record for each required bus and declare
the bb_miiphy_buses_num variable with the number of mii buses.
The record (struct bb_miiphy_bus) has the following fields/callbacks (see
miiphy.h for details):

char name[]            - The symbolic name that must be equal to the MII bus
                         registered name
int (*init)()          - Initialization function called at startup time (just
                         before the Ethernet initialization)
int (*mdio_active)()   - Activate the MDIO pin as output
int (*mdio_tristate)() - Activate the MDIO pin as input/tristate pin
int (*set_mdio)()      - Write the MDIO pin
int (*get_mdio)()      - Read the MDIO pin
int (*set_mdc)()       - Write the MDC pin
int (*delay)()         - Delay function
void *priv             - Private data used by board specific code

The board code will look like:

struct bb_miiphy_bus bb_miiphy_buses[] = {
 { .name = miibus#1, .init = b1_init, .mdio_active = b1_mdio_active, ... },
 { .name = miibus#2, .init = b2_init, .mdio_active = b2_mdio_active, ... },
 ...
int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) /
                          sizeof(bb_miiphy_buses[0]);

Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

1 files changed, 242 insertions, 104 deletions

diff --git a/drivers/net/phy/miiphybb.c b/drivers/net/phy/miiphybb.c
index b77c917462a..44c45fa66b4 100644
--- a/drivers/net/phy/miiphybb.c
+++ b/drivers/net/phy/miiphybb.c
@@ -1,4 +1,7 @@
 /*
+ * (C) Copyright 2009 Industrie Dial Face S.p.A.
+ * Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+ *
  * (C) Copyright 2001
  * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
  *
@@ -29,18 +32,144 @@
 #include <common.h>
 #include <ioports.h>
 #include <ppc_asm.tmpl>
+#include <miiphy.h>
+
+#define BB_MII_RELOCATE(v,off) (v += (v?off:0))
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_BITBANGMII_MULTI
+
+/*
+ * If CONFIG_BITBANGMII_MULTI is not defined we use a
+ * compatibility layer with the previous miiphybb implementation
+ * based on macros usage.
+ *
+ */
+static int bb_mii_init_wrap(struct bb_miiphy_bus *bus)
+{
+#ifdef MII_INIT
+	MII_INIT;
+#endif
+	return 0;
+}
+
+static int bb_mdio_active_wrap(struct bb_miiphy_bus *bus)
+{
+#ifdef MDIO_DECLARE
+	MDIO_DECLARE;
+#endif
+	MDIO_ACTIVE;
+	return 0;
+}
+
+static int bb_mdio_tristate_wrap(struct bb_miiphy_bus *bus)
+{
+#ifdef MDIO_DECLARE
+	MDIO_DECLARE;
+#endif
+	MDIO_TRISTATE;
+	return 0;
+}
+
+static int bb_set_mdio_wrap(struct bb_miiphy_bus *bus, int v)
+{
+#ifdef MDIO_DECLARE
+	MDIO_DECLARE;
+#endif
+	MDIO(v);
+	return 0;
+}
+
+static int bb_get_mdio_wrap(struct bb_miiphy_bus *bus, int *v)
+{
+#ifdef MDIO_DECLARE
+	MDIO_DECLARE;
+#endif
+	*v = MDIO_READ;
+	return 0;
+}
+
+static int bb_set_mdc_wrap(struct bb_miiphy_bus *bus, int v)
+{
+#ifdef MDC_DECLARE
+	MDC_DECLARE;
+#endif
+	MDC(v);
+	return 0;
+}
+
+static int bb_delay_wrap(struct bb_miiphy_bus *bus)
+{
+	MIIDELAY;
+	return 0;
+}
+
+struct bb_miiphy_bus bb_miiphy_buses[] = {
+	{
+		.name = BB_MII_DEVNAME,
+		.init = bb_mii_init_wrap,
+		.mdio_active = bb_mdio_active_wrap,
+		.mdio_tristate = bb_mdio_tristate_wrap,
+		.set_mdio = bb_set_mdio_wrap,
+		.get_mdio = bb_get_mdio_wrap,
+		.set_mdc = bb_set_mdc_wrap,
+		.delay = bb_delay_wrap,
+	}
+};
+
+int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) /
+                          sizeof(bb_miiphy_buses[0]);
+#endif
+
+void bb_miiphy_init(void)
+{
+	int i;
+
+	for (i = 0; i < bb_miiphy_buses_num; i++) {
+#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+		/* Relocate the hook pointers*/
+		BB_MII_RELOCATE(bb_miiphy_buses[i].init, gd->reloc_off);
+		BB_MII_RELOCATE(bb_miiphy_buses[i].mdio_active, gd->reloc_off);
+		BB_MII_RELOCATE(bb_miiphy_buses[i].mdio_tristate, gd->reloc_off);
+		BB_MII_RELOCATE(bb_miiphy_buses[i].set_mdio, gd->reloc_off);
+		BB_MII_RELOCATE(bb_miiphy_buses[i].get_mdio, gd->reloc_off);
+		BB_MII_RELOCATE(bb_miiphy_buses[i].set_mdc, gd->reloc_off);
+		BB_MII_RELOCATE(bb_miiphy_buses[i].delay, gd->reloc_off);
+#endif
+		if (bb_miiphy_buses[i].init != NULL) {
+			bb_miiphy_buses[i].init(&bb_miiphy_buses[i]);
+		}
+	}
+}
+
+static inline struct bb_miiphy_bus *bb_miiphy_getbus(char *devname)
+{
+#ifdef CONFIG_BITBANGMII_MULTI
+	int i;
+
+	/* Search the correct bus */
+	for (i = 0; i < bb_miiphy_buses_num; i++) {
+		if (!strcmp(bb_miiphy_buses[i].name, devname)) {
+			return &bb_miiphy_buses[i];
+		}
+	}
+	return NULL;
+#else
+	/* We have just one bitbanging bus */
+	return &bb_miiphy_buses[0];
+#endif
+}
 
 /*****************************************************************************
  *
  * Utility to send the preamble, address, and register (common to read
  * and write).
  */
-static void miiphy_pre (char read, unsigned char addr, unsigned char reg)
+static void miiphy_pre(struct bb_miiphy_bus *bus, char read,
+                       unsigned char addr, unsigned char reg)
 {
-	int j;			/* counter */
-#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
-	volatile ioport_t *iop = ioport_addr ((immap_t *) CONFIG_SYS_IMMR, MDIO_PORT);
-#endif
+	int j;
 
 	/*
 	 * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
@@ -50,67 +179,66 @@ static void miiphy_pre (char read, unsigned char addr, unsigned char reg)
 	 * but it is safer and will be much more robust.
 	 */
 
-	MDIO_ACTIVE;
-	MDIO (1);
+	bus->mdio_active(bus);
+	bus->set_mdio(bus, 1);
 	for (j = 0; j < 32; j++) {
-		MDC (0);
-		MIIDELAY;
-		MDC (1);
-		MIIDELAY;
+		bus->set_mdc(bus, 0);
+		bus->delay(bus);
+		bus->set_mdc(bus, 1);
+		bus->delay(bus);
 	}
 
 	/* send the start bit (01) and the read opcode (10) or write (10) */
-	MDC (0);
-	MDIO (0);
-	MIIDELAY;
-	MDC (1);
-	MIIDELAY;
-	MDC (0);
-	MDIO (1);
-	MIIDELAY;
-	MDC (1);
-	MIIDELAY;
-	MDC (0);
-	MDIO (read);
-	MIIDELAY;
-	MDC (1);
-	MIIDELAY;
-	MDC (0);
-	MDIO (!read);
-	MIIDELAY;
-	MDC (1);
-	MIIDELAY;
+	bus->set_mdc(bus, 0);
+	bus->set_mdio(bus, 0);
+	bus->delay(bus);
+	bus->set_mdc(bus, 1);
+	bus->delay(bus);
+	bus->set_mdc(bus, 0);
+	bus->set_mdio(bus, 1);
+	bus->delay(bus);
+	bus->set_mdc(bus, 1);
+	bus->delay(bus);
+	bus->set_mdc(bus, 0);
+	bus->set_mdio(bus, read);
+	bus->delay(bus);
+	bus->set_mdc(bus, 1);
+	bus->delay(bus);
+	bus->set_mdc(bus, 0);
+	bus->set_mdio(bus, !read);
+	bus->delay(bus);
+	bus->set_mdc(bus, 1);
+	bus->delay(bus);
 
 	/* send the PHY address */
 	for (j = 0; j < 5; j++) {
-		MDC (0);
+		bus->set_mdc(bus, 0);
 		if ((addr & 0x10) == 0) {
-			MDIO (0);
+			bus->set_mdio(bus, 0);
 		} else {
-			MDIO (1);
+			bus->set_mdio(bus, 1);
 		}
-		MIIDELAY;
-		MDC (1);
-		MIIDELAY;
+		bus->delay(bus);
+		bus->set_mdc(bus, 1);
+		bus->delay(bus);
 		addr <<= 1;
 	}
 
 	/* send the register address */
 	for (j = 0; j < 5; j++) {
-		MDC (0);
+		bus->set_mdc(bus, 0);
 		if ((reg & 0x10) == 0) {
-			MDIO (0);
+			bus->set_mdio(bus, 0);
 		} else {
-			MDIO (1);
+			bus->set_mdio(bus, 1);
 		}
-		MIIDELAY;
-		MDC (1);
-		MIIDELAY;
+		bus->delay(bus);
+		bus->set_mdc(bus, 1);
+		bus->delay(bus);
 		reg <<= 1;
 	}
 }
 
-
 /*****************************************************************************
  *
  * Read a MII PHY register.
@@ -118,63 +246,69 @@ static void miiphy_pre (char read, unsigned char addr, unsigned char reg)
  * Returns:
  *   0 on success
  */
-int bb_miiphy_read (char *devname, unsigned char addr,
-		unsigned char reg, unsigned short *value)
+int bb_miiphy_read(char *devname, unsigned char addr,
+                   unsigned char reg, unsigned short *value)
 {
-	short rdreg;		/* register working value */
-	int j;			/* counter */
-#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
-	volatile ioport_t *iop = ioport_addr ((immap_t *) CONFIG_SYS_IMMR, MDIO_PORT);
-#endif
+	short rdreg; /* register working value */
+	int v;
+	int j; /* counter */
+	struct bb_miiphy_bus *bus;
+
+	bus = bb_miiphy_getbus(devname);
+	if (bus == NULL) {
+		return -1;
+	}
 
 	if (value == NULL) {
 		puts("NULL value pointer\n");
-		return (-1);
+		return -1;
 	}
 
-	miiphy_pre (1, addr, reg);
+	miiphy_pre (bus, 1, addr, reg);
 
 	/* tri-state our MDIO I/O pin so we can read */
-	MDC (0);
-	MDIO_TRISTATE;
-	MIIDELAY;
-	MDC (1);
-	MIIDELAY;
+	bus->set_mdc(bus, 0);
+	bus->mdio_tristate(bus);
+	bus->delay(bus);
+	bus->set_mdc(bus, 1);
+	bus->delay(bus);
 
 	/* check the turnaround bit: the PHY should be driving it to zero */
-	if (MDIO_READ != 0) {
+	bus->get_mdio(bus, &v);
+	if (v != 0) {
 		/* puts ("PHY didn't drive TA low\n"); */
 		for (j = 0; j < 32; j++) {
-			MDC (0);
-			MIIDELAY;
-			MDC (1);
-			MIIDELAY;
+			bus->set_mdc(bus, 0);
+			bus->delay(bus);
+			bus->set_mdc(bus, 1);
+			bus->delay(bus);
 		}
 		/* There is no PHY, set value to 0xFFFF and return */
 		*value = 0xFFFF;
-		return (-1);
+		return -1;
 	}
 
-	MDC (0);
-	MIIDELAY;
+	bus->set_mdc(bus, 0);
+	bus->delay(bus);
 
 	/* read 16 bits of register data, MSB first */
 	rdreg = 0;
 	for (j = 0; j < 16; j++) {
-		MDC (1);
-		MIIDELAY;
+		bus->set_mdc(bus, 1);
+		bus->delay(bus);
 		rdreg <<= 1;
-		rdreg |= MDIO_READ;
-		MDC (0);
-		MIIDELAY;
+		bus->get_mdio(bus, &v);
+		rdreg |= (v & 0x1);
+		bus->set_mdc(bus, 0);
+		bus->delay(bus);
 	}
 
-	MDC (1);
-	MIIDELAY;
-	MDC (0);
-	MIIDELAY;
-	MDC (1);
-	MIIDELAY;
+	bus->set_mdc(bus, 1);
+	bus->delay(bus);
+	bus->set_mdc(bus, 0);
+	bus->delay(bus);
+	bus->set_mdc(bus, 1);
+	bus->delay(bus);
 
 	*value = rdreg;
 
@@ -194,49 +328,53 @@ int bb_miiphy_read (char *devname, unsigned char addr,
  *   0 on success
  */
 int bb_miiphy_write (char *devname, unsigned char addr,
-		unsigned char reg, unsigned short value)
+                     unsigned char reg, unsigned short value)
 {
+	struct bb_miiphy_bus *bus;
 	int j;			/* counter */
-#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
-	volatile ioport_t *iop = ioport_addr ((immap_t *) CONFIG_SYS_IMMR, MDIO_PORT);
-#endif
 
-	miiphy_pre (0, addr, reg);
+	bus = bb_miiphy_getbus(devname);
+	if (bus == NULL) {
+		/* Bus not found! */
+		return -1;
+	}
+
+	miiphy_pre (bus, 0, addr, reg);
 
 	/* send the turnaround (10) */
-	MDC (0);
-	MDIO (1);
-	MIIDELAY;
-	MDC (1);
-	MIIDELAY;
-	MDC (0);
-	MDIO (0);
-	MIIDELAY;
-	MDC (1);
-	MIIDELAY;
+	bus->set_mdc(bus, 0);
+	bus->set_mdio(bus, 1);
+	bus->delay(bus);
+	bus->set_mdc(bus, 1);
+	bus->delay(bus);
+	bus->set_mdc(bus, 0);
+	bus->set_mdio(bus, 0);
+	bus->delay(bus);
+	bus->set_mdc(bus, 1);
+	bus->delay(bus);
 
 	/* write 16 bits of register data, MSB first */
 	for (j = 0; j < 16; j++) {
-		MDC (0);
+		bus->set_mdc(bus, 0);
 		if ((value & 0x00008000) == 0) {
-			MDIO (0);
+			bus->set_mdio(bus, 0);
 		} else {
-			MDIO (1);
+			bus->set_mdio(bus, 1);
 		}
-		MIIDELAY;
-		MDC (1);
-		MIIDELAY;
+		bus->delay(bus);
+		bus->set_mdc(bus, 1);
+		bus->delay(bus);
 		value <<= 1;
 	}
 
 	/*
 	 * Tri-state the MDIO line.
 	 */
-	MDIO_TRISTATE;
-	MDC (0);
-	MIIDELAY;
-	MDC (1);
-	MIIDELAY;
+	bus->mdio_tristate(bus);
+	bus->set_mdc(bus, 0);
+	bus->delay(bus);
+	bus->set_mdc(bus, 1);
+	bus->delay(bus);
 
 	return 0;
-}
+}
\ No newline at end of file