Merge branch 'next' of ../next

22 files changed, 1313 insertions, 70 deletions

diff --git a/drivers/fpga/spartan3.c b/drivers/fpga/spartan3.c
index 7a89b5692cb..1dd6f26f98a 100644
--- a/drivers/fpga/spartan3.c
+++ b/drivers/fpga/spartan3.c
@@ -366,6 +366,8 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 			CONFIG_FPGA_DELAY ();
 			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {	/* check the time */
 				puts ("** Timeout waiting for INIT to start.\n");
+				if (*fn->abort)
+					(*fn->abort) (cookie);
 				return FPGA_FAIL;
 			}
 		} while (!(*fn->init) (cookie));
@@ -380,6 +382,8 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 			CONFIG_FPGA_DELAY ();
 			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {	/* check the time */
 				puts ("** Timeout waiting for INIT to clear.\n");
+				if (*fn->abort)
+					(*fn->abort) (cookie);
 				return FPGA_FAIL;
 			}
 		} while ((*fn->init) (cookie));
@@ -394,6 +398,8 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 				   while DONE is low (inactive) */
 				if ((*fn->done) (cookie) == 0 && (*fn->init) (cookie)) {
 					puts ("** CRC error during FPGA load.\n");
+					if (*fn->abort)
+						(*fn->abort) (cookie);
 					return (FPGA_FAIL);
 				}
 				val = data [bytecount ++];
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 398024c7bc3..a5fa2b5d851 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -27,6 +27,7 @@ LIB 	:= $(obj)libgpio.o
 
 COBJS-$(CONFIG_AT91_GPIO)	+= at91_gpio.o
 COBJS-$(CONFIG_KIRKWOOD_GPIO)	+= kw_gpio.o
+COBJS-$(CONFIG_MARVELL_MFP)	+= mvmfp.o
 COBJS-$(CONFIG_MXC_GPIO)	+= mxc_gpio.o
 COBJS-$(CONFIG_PCA953X)		+= pca953x.o
 COBJS-$(CONFIG_S5P)		+= s5p_gpio.o
diff --git a/drivers/gpio/mvmfp.c b/drivers/gpio/mvmfp.c
new file mode 100644
index 00000000000..5646ed43704
--- /dev/null
+++ b/drivers/gpio/mvmfp.c
@@ -0,0 +1,87 @@
+/*
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>,
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <mvmfp.h>
+#include <asm/arch/mfp.h>
+#ifdef CONFIG_ARMADA100
+#include <asm/arch/armada100.h>
+#else
+#error Unsupported SoC...
+#endif
+
+/*
+ * mfp_config
+ *
+ * On most of Marvell SoCs (ex. ARMADA100) there is Multi-Funtion-Pin
+ * configuration registers to configure each GPIO/Function pin on the
+ * SoC.
+ *
+ * This function reads the array of values for
+ * MFPR_X registers and programms them into respective
+ * Multi-Function Pin registers.
+ * It supports - Alternate Function Selection programming.
+ *
+ * Whereas,
+ * The Configureation value is constructed using MFP()
+ * array consists of 32bit values as defined in MFP(xx,xx..) macro
+ */
+void mfp_config(u32 *mfp_cfgs)
+{
+	u32 *p_mfpr = NULL;
+	u32 cfg_val, val;
+
+	do {
+		cfg_val = *mfp_cfgs++;
+		/* exit if End of configuration table detected */
+		if (cfg_val == MFP_EOC)
+			break;
+
+		p_mfpr = (u32 *)(MV_MFPR_BASE
+				+ MFP_REG_GET_OFFSET(cfg_val));
+
+		/* Write a mfg register as per configuration */
+		val = 0;
+		if (cfg_val & MFP_AF_FLAG)
+			/* Abstract and program Afternate-Func Selection */
+			val |= cfg_val & MFP_AF_MASK;
+		if (cfg_val & MFP_EDGE_FLAG)
+			/* Abstract and program Edge configuration */
+			val |= cfg_val & MFP_LPM_EDGE_MASK;
+		if (cfg_val & MFP_DRIVE_FLAG)
+			/* Abstract and program Drive configuration */
+			val |= cfg_val & MFP_DRIVE_MASK;
+		if (cfg_val & MFP_PULL_FLAG)
+			/* Abstract and program Pullup/down configuration */
+			val |= cfg_val & MFP_PULL_MASK;
+
+		writel(val, p_mfpr);
+	} while (1);
+	/*
+	 * perform a read-back of any MFPR register to make sure the
+	 * previous writings are finished
+	 */
+	readl(p_mfpr);
+}
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 39c235ebc26..b0068842f1c 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -74,6 +74,20 @@ flash_info_t flash_info[CFI_MAX_FLASH_BANKS];	/* FLASH chips info */
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
 #endif
 
+/*
+ * 0xffff is an undefined value for the configuration register. When
+ * this value is returned, the configuration register shall not be
+ * written at all (default mode).
+ */
+static u16 cfi_flash_config_reg(int i)
+{
+#ifdef CONFIG_SYS_CFI_FLASH_CONFIG_REGS
+	return ((u16 [])CONFIG_SYS_CFI_FLASH_CONFIG_REGS)[i];
+#else
+	return 0xffff;
+#endif
+}
+
 #if defined(CONFIG_SYS_MAX_FLASH_BANKS_DETECT)
 int cfi_flash_num_flash_banks = CONFIG_SYS_MAX_FLASH_BANKS_DETECT;
 #endif
@@ -1112,18 +1126,18 @@ static int sector_erased(flash_info_t *info, int i)
 {
 	int k;
 	int size;
-	volatile unsigned long *flash;
+	u32 *flash;
 
 	/*
 	 * Check if whole sector is erased
 	 */
 	size = flash_sector_size(info, i);
-	flash = (volatile unsigned long *) info->start[i];
+	flash = (u32 *)info->start[i];
 	/* divide by 4 for longword access */
 	size = size >> 2;
 
 	for (k = 0; k < size; k++) {
-		if (*flash++ != 0xffffffff)
+		if (flash_read32(flash++) != 0xffffffff)
 			return 0;	/* not erased */
 	}
 
@@ -1426,6 +1440,11 @@ int flash_real_protect (flash_info_t * info, long sector, int prot)
 #endif
 	};
 
+	/*
+	 * Flash needs to be in status register read mode for
+	 * flash_full_status_check() to work correctly
+	 */
+	flash_write_cmd(info, sector, 0, FLASH_CMD_READ_STATUS);
 	if ((retcode =
 	     flash_full_status_check (info, sector, info->erase_blk_tout,
 				      prot ? "protect" : "unprotect")) == 0) {
@@ -1975,6 +1994,13 @@ ulong flash_get_size (phys_addr_t base, int banknum)
 				case CFI_CMDSET_INTEL_PROG_REGIONS:
 				case CFI_CMDSET_INTEL_EXTENDED:
 				case CFI_CMDSET_INTEL_STANDARD:
+					/*
+					 * Set flash to read-id mode. Otherwise
+					 * reading protected status is not
+					 * guaranteed.
+					 */
+					flash_write_cmd(info, sect_cnt, 0,
+							FLASH_CMD_READ_ID);
 					info->protect[sect_cnt] =
 						flash_isset (info, sect_cnt,
 							     FLASH_OFFSET_PROTECT,
@@ -2021,6 +2047,31 @@ void flash_set_verbose(uint v)
 	flash_verbose = v;
 }
 
+static void cfi_flash_set_config_reg(u32 base, u16 val)
+{
+#ifdef CONFIG_SYS_CFI_FLASH_CONFIG_REGS
+	/*
+	 * Only set this config register if really defined
+	 * to a valid value (0xffff is invalid)
+	 */
+	if (val == 0xffff)
+		return;
+
+	/*
+	 * Set configuration register. Data is "encrypted" in the 16 lower
+	 * address bits.
+	 */
+	flash_write16(FLASH_CMD_SETUP, (void *)(base + (val << 1)));
+	flash_write16(FLASH_CMD_SET_CR_CONFIRM, (void *)(base + (val << 1)));
+
+	/*
+	 * Finally issue reset-command to bring device back to
+	 * read-array mode
+	 */
+	flash_write16(FLASH_CMD_RESET, (void *)base);
+#endif
+}
+
 /*-----------------------------------------------------------------------
  */
 unsigned long flash_init (void)
@@ -2044,6 +2095,10 @@ unsigned long flash_init (void)
 	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 
+		/* Optionally write flash configuration register */
+		cfi_flash_set_config_reg(cfi_flash_bank_addr(i),
+					 cfi_flash_config_reg(i));
+
 		if (!flash_detect_legacy(cfi_flash_bank_addr(i), i))
 			flash_get_size(cfi_flash_bank_addr(i), i);
 		size += flash_info[i].size;
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 21cc5a39407..5239c1fcff6 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -439,11 +439,12 @@ void nand_wait_ready(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
 	u32 timeo = (CONFIG_SYS_HZ * 20) / 1000;
+	u32 time_start;
 
-	reset_timer();
+	time_start = get_timer(0);
 
 	/* wait until command is processed or timeout occures */
-	while (get_timer(0) < timeo) {
+	while (get_timer(time_start) < timeo) {
 		if (chip->dev_ready)
 			if (chip->dev_ready(mtd))
 				break;
@@ -704,6 +705,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this)
 {
 	unsigned long	timeo;
 	int state = this->state;
+	u32 time_start;
 
 	if (state == FL_ERASING)
 		timeo = (CONFIG_SYS_HZ * 400) / 1000;
@@ -715,10 +717,10 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this)
 	else
 		this->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
 
-	reset_timer();
+	time_start = get_timer(0);
 
 	while (1) {
-		if (get_timer(0) > timeo) {
+		if (get_timer(time_start) > timeo) {
 			printf("Timeout!");
 			return 0x01;
 		}
@@ -732,8 +734,9 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this)
 		}
 	}
 #ifdef PPCHAMELON_NAND_TIMER_HACK
-	reset_timer();
-	while (get_timer(0) < 10);
+	time_start = get_timer(0);
+	while (get_timer(time_start) < 10)
+		;
 #endif /*  PPCHAMELON_NAND_TIMER_HACK */
 
 	return this->read_byte(mtd);
@@ -2409,11 +2412,11 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
 /*
  * Get the flash and manufacturer id and lookup if the type is supported
  */
-static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
+static const struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 						  struct nand_chip *chip,
 						  int busw, int *maf_id)
 {
-	struct nand_flash_dev *type = NULL;
+	const struct nand_flash_dev *type = NULL;
 	int i, dev_id, maf_idx;
 	int tmp_id, tmp_manf;
 
@@ -2587,7 +2590,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips)
 {
 	int i, busw, nand_maf_id;
 	struct nand_chip *chip = mtd->priv;
-	struct nand_flash_dev *type;
+	const struct nand_flash_dev *type;
 
 	/* Get buswidth to select the correct functions */
 	busw = chip->options & NAND_BUSWIDTH_16;
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 25b22ecc926..8d7ea767dd5 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -22,7 +22,7 @@
 +	256	256 Byte page size
 *	512	512 Byte page size
 */
-struct nand_flash_dev nand_flash_ids[] = {
+const struct nand_flash_dev nand_flash_ids[] = {
 
 #ifdef CONFIG_MTD_NAND_MUSEUM_IDS
 	{"NAND 1MiB 5V 8-bit",		0x6e, 256, 1, 0x1000, 0},
@@ -132,7 +132,7 @@ struct nand_flash_dev nand_flash_ids[] = {
 /*
 *	Manufacturer ID list
 */
-struct nand_manufacturers nand_manuf_ids[] = {
+const struct nand_manufacturers nand_manuf_ids[] = {
 	{NAND_MFR_TOSHIBA, "Toshiba"},
 	{NAND_MFR_SAMSUNG, "Samsung"},
 	{NAND_MFR_FUJITSU, "Fujitsu"},
diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
index 3d607c06d39..57112af66f2 100644
--- a/drivers/mtd/spi/Makefile
+++ b/drivers/mtd/spi/Makefile
@@ -27,6 +27,7 @@ LIB	:= $(obj)libspi_flash.o
 
 COBJS-$(CONFIG_SPI_FLASH)	+= spi_flash.o
 COBJS-$(CONFIG_SPI_FLASH_ATMEL)	+= atmel.o
+COBJS-$(CONFIG_SPI_FLASH_EON)	+= eon.o
 COBJS-$(CONFIG_SPI_FLASH_MACRONIX)	+= macronix.o
 COBJS-$(CONFIG_SPI_FLASH_SPANSION)	+= spansion.o
 COBJS-$(CONFIG_SPI_FLASH_SST)	+= sst.o
diff --git a/drivers/mtd/spi/eon.c b/drivers/mtd/spi/eon.c
new file mode 100644
index 00000000000..02c3bb93047
--- /dev/null
+++ b/drivers/mtd/spi/eon.c
@@ -0,0 +1,275 @@
+/*
+ * (C) Copyright 2010, ucRobotics Inc.
+ * Author: Chong Huang <chuang@ucrobotics.com>
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi_flash.h>
+
+#include "spi_flash_internal.h"
+
+/* EN25Q128-specific commands */
+#define CMD_EN25Q128_WREN	0x06    /* Write Enable */
+#define CMD_EN25Q128_WRDI	0x04    /* Write Disable */
+#define CMD_EN25Q128_RDSR	0x05    /* Read Status Register */
+#define CMD_EN25Q128_WRSR	0x01    /* Write Status Register */
+#define CMD_EN25Q128_READ	0x03    /* Read Data Bytes */
+#define CMD_EN25Q128_FAST_READ	0x0b    /* Read Data Bytes at Higher Speed */
+#define CMD_EN25Q128_PP		0x02    /* Page Program */
+#define CMD_EN25Q128_SE		0x20    /* Sector Erase */
+#define CMD_EN25Q128_BE		0xd8    /* Block Erase */
+#define CMD_EN25Q128_DP		0xb9    /* Deep Power-down */
+#define CMD_EN25Q128_RES	0xab    /* Release from DP, and Read Signature */
+
+#define EON_ID_EN25Q128		0x18
+
+#define EON_SR_WIP		(1 << 0)	/* Write-in-Progress */
+
+struct eon_spi_flash_params {
+	u8 idcode1;
+	u16 page_size;
+	u16 pages_per_sector;
+	u16 sectors_per_block;
+	u16 nr_sectors;
+	const char *name;
+};
+
+/* spi_flash needs to be first so upper layers can free() it */
+struct eon_spi_flash {
+	struct spi_flash flash;
+	const struct eon_spi_flash_params *params;
+};
+
+static inline struct eon_spi_flash *to_eon_spi_flash(struct spi_flash *flash)
+{
+	return container_of(flash, struct eon_spi_flash, flash);
+}
+
+static const struct eon_spi_flash_params eon_spi_flash_table[] = {
+	{
+		.idcode1 = EON_ID_EN25Q128,
+		.page_size = 256,
+		.pages_per_sector = 16,
+		.sectors_per_block = 16,
+		.nr_sectors = 4096,
+		.name = "EN25Q128",
+	},
+};
+
+static int eon_wait_ready(struct spi_flash *flash, unsigned long timeout)
+{
+	struct spi_slave *spi = flash->spi;
+	unsigned long timebase;
+	int ret;
+	u8 cmd = CMD_EN25Q128_RDSR;
+	u8 status;
+
+	ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN);
+	if (ret) {
+		debug("SF: Failed to send command %02x: %d\n", cmd, ret);
+		return ret;
+	}
+
+	timebase = get_timer(0);
+	do {
+		ret = spi_xfer(spi, 8, NULL, &status, 0);
+		if (ret)
+			return -1;
+
+		if ((status & EON_SR_WIP) == 0)
+			break;
+
+	} while (get_timer(timebase) < timeout);
+
+	spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);
+
+	if ((status & EON_SR_WIP) == 0)
+		return 0;
+
+	/* Timed out */
+	return -1;
+}
+
+static int eon_read_fast(struct spi_flash *flash,
+			 u32 offset, size_t len, void *buf)
+{
+	struct eon_spi_flash *eon = to_eon_spi_flash(flash);
+	unsigned long page_addr;
+	unsigned long page_size;
+	u8 cmd[5];
+
+	page_size = eon->params->page_size;
+	page_addr = offset / page_size;
+
+	cmd[0] = CMD_READ_ARRAY_FAST;
+	cmd[1] = page_addr >> 8;
+	cmd[2] = page_addr;
+	cmd[3] = offset % page_size;
+	cmd[4] = 0x00;
+
+	return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len);
+}
+
+static int eon_write(struct spi_flash *flash,
+		     u32 offset, size_t len, const void *buf)
+{
+	struct eon_spi_flash *eon = to_eon_spi_flash(flash);
+	unsigned long page_addr;
+	unsigned long byte_addr;
+	unsigned long page_size;
+	size_t chunk_len;
+	size_t actual;
+	int ret;
+	u8 cmd[4];
+
+	page_size = eon->params->page_size;
+	page_addr = offset / page_size;
+	byte_addr = offset % page_size;
+
+	ret = spi_claim_bus(flash->spi);
+	if (ret) {
+		debug("SF: Unable to claim SPI bus\n");
+		return ret;
+	}
+
+	ret = 0;
+	for (actual = 0; actual < len; actual += chunk_len) {
+		chunk_len = min(len - actual, page_size - byte_addr);
+
+		cmd[0] = CMD_EN25Q128_PP;
+		cmd[1] = page_addr >> 8;
+		cmd[2] = page_addr;
+		cmd[3] = byte_addr;
+
+		debug
+		    ("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %d\n",
+		     buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
+
+		ret = spi_flash_cmd(flash->spi, CMD_EN25Q128_WREN, NULL, 0);
+		if (ret < 0) {
+			debug("SF: Enabling Write failed\n");
+			break;
+		}
+
+		ret = spi_flash_cmd_write(flash->spi, cmd, 4,
+					  buf + actual, chunk_len);
+		if (ret < 0) {
+			debug("SF: EON Page Program failed\n");
+			break;
+		}
+
+		ret = eon_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
+		if (ret < 0) {
+			debug("SF: EON page programming timed out\n");
+			break;
+		}
+
+		page_addr++;
+		byte_addr = 0;
+	}
+
+	debug("SF: EON: Successfully programmed %u bytes @ 0x%x\n",
+	      len, offset);
+
+	spi_release_bus(flash->spi);
+	return ret;
+}
+
+int eon_erase(struct spi_flash *flash, u32 offset, size_t len)
+{
+	/* block erase */
+	struct eon_spi_flash *eon = to_eon_spi_flash(flash);
+	unsigned long block_size;
+	size_t actual;
+	int ret;
+	u8 cmd[4];
+
+
+	block_size = eon->params->page_size * eon->params->pages_per_sector
+	       * eon->params->sectors_per_block;
+
+	if (offset % block_size || len % block_size) {
+		debug("SF: Erase offset/length not multiple of block size\n");
+		return -1;
+	}
+
+	len /= block_size;
+	cmd[0] = CMD_EN25Q128_BE;
+	cmd[2] = 0x00;
+	cmd[3] = 0x00;
+
+	ret = spi_claim_bus(flash->spi);
+	if (ret) {
+		debug("SF: Unable to claim SPI bus\n");
+		return ret;
+	}
+
+	ret = 0;
+	for (actual = 0; actual < len; actual++) {
+		cmd[1] = (offset / block_size) + actual;
+		ret = spi_flash_cmd(flash->spi, CMD_EN25Q128_WREN, NULL, 0);
+		if (ret < 0) {
+			debug("SF: Enabling Write failed\n");
+			break;
+		}
+
+		ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0);
+		if (ret < 0) {
+			debug("SF: EON page erase failed\n");
+			break;
+		}
+
+		ret = eon_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT);
+		if (ret < 0) {
+			debug("SF: EON page erase timed out\n");
+			break;
+		}
+	}
+
+	debug("SF: EON: Successfully erased %u bytes @ 0x%x\n",
+	      len * block_size, offset);
+
+	spi_release_bus(flash->spi);
+	return ret;
+}
+
+struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode)
+{
+	const struct eon_spi_flash_params *params;
+	struct eon_spi_flash *eon;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(eon_spi_flash_table); ++i) {
+		params = &eon_spi_flash_table[i];
+		if (params->idcode1 == idcode[2])
+			break;
+	}
+
+	if (i == ARRAY_SIZE(eon_spi_flash_table)) {
+		debug("SF: Unsupported EON ID %02x\n", idcode[1]);
+		return NULL;
+	}
+
+	eon = malloc(sizeof(*eon));
+	if (!eon) {
+		debug("SF: Failed to allocate memory\n");
+		return NULL;
+	}
+
+	eon->params = params;
+	eon->flash.spi = spi;
+	eon->flash.name = params->name;
+
+	eon->flash.write = eon_write;
+	eon->flash.erase = eon_erase;
+	eon->flash.read = eon_read_fast;
+	eon->flash.size = params->page_size * params->pages_per_sector
+	    * params->nr_sectors;
+
+	debug("SF: Detected %s with page size %u, total %u bytes\n",
+	      params->name, params->page_size, eon->flash.size);
+
+	return &eon->flash;
+}
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index ab02ef3e04d..b61d2198cd1 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -131,6 +131,9 @@ static const struct {
 #ifdef CONFIG_SPI_FLASH_ATMEL
 	{ 0, 0x1f, spi_flash_probe_atmel, },
 #endif
+#ifdef CONFIG_SPI_FLASH_EON
+	{ 0, 0x1c, spi_flash_probe_eon, },
+#endif
 #ifdef CONFIG_SPI_FLASH_MACRONIX
 	{ 0, 0xc2, spi_flash_probe_macronix, },
 #endif
diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h
index 9bc43dd21e1..68dcffb9717 100644
--- a/drivers/mtd/spi/spi_flash_internal.h
+++ b/drivers/mtd/spi/spi_flash_internal.h
@@ -46,6 +46,7 @@ int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
 /* Manufacturer-specific probe functions */
 struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode);
 struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode);
+struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode);
 struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode);
 struct spi_flash *spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode);
 struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode);
diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c
index de3aeb810a6..44523555d9e 100644
--- a/drivers/mtd/spi/winbond.c
+++ b/drivers/mtd/spi/winbond.c
@@ -24,11 +24,6 @@
 #define CMD_W25_DP		0xb9	/* Deep Power-down */
 #define CMD_W25_RES		0xab	/* Release from DP, and Read Signature */
 
-#define WINBOND_ID_W25X16		0x3015
-#define WINBOND_ID_W25X32		0x3016
-#define WINBOND_ID_W25X64		0x3017
-#define WINBOND_ID_W25Q64		0x4017
-
 #define WINBOND_SR_WIP		(1 << 0)	/* Write-in-Progress */
 
 struct winbond_spi_flash_params {
@@ -37,7 +32,7 @@ struct winbond_spi_flash_params {
 	uint8_t		l2_page_size;
 	uint16_t	pages_per_sector;
 	uint16_t	sectors_per_block;
-	uint8_t		nr_blocks;
+	uint16_t	nr_blocks;
 	const char	*name;
 };
 
@@ -55,7 +50,7 @@ to_winbond_spi_flash(struct spi_flash *flash)
 
 static const struct winbond_spi_flash_params winbond_spi_flash_table[] = {
 	{
-		.id			= WINBOND_ID_W25X16,
+		.id			= 0x3015,
 		.l2_page_size		= 8,
 		.pages_per_sector	= 16,
 		.sectors_per_block	= 16,
@@ -63,7 +58,7 @@ static const struct winbond_spi_flash_params winbond_spi_flash_table[] = {
 		.name			= "W25X16",
 	},
 	{
-		.id			= WINBOND_ID_W25X32,
+		.id			= 0x3016,
 		.l2_page_size		= 8,
 		.pages_per_sector	= 16,
 		.sectors_per_block	= 16,
@@ -71,7 +66,7 @@ static const struct winbond_spi_flash_params winbond_spi_flash_table[] = {
 		.name			= "W25X32",
 	},
 	{
-		.id			= WINBOND_ID_W25X64,
+		.id			= 0x3017,
 		.l2_page_size		= 8,
 		.pages_per_sector	= 16,
 		.sectors_per_block	= 16,
@@ -79,13 +74,37 @@ static const struct winbond_spi_flash_params winbond_spi_flash_table[] = {
 		.name			= "W25X64",
 	},
 	{
-		.id			= WINBOND_ID_W25Q64,
+		.id			= 0x4015,
+		.l2_page_size		= 8,
+		.pages_per_sector	= 16,
+		.sectors_per_block	= 16,
+		.nr_blocks		= 32,
+		.name			= "W25Q16",
+	},
+	{
+		.id			= 0x4016,
+		.l2_page_size		= 8,
+		.pages_per_sector	= 16,
+		.sectors_per_block	= 16,
+		.nr_blocks		= 64,
+		.name			= "W25Q32",
+	},
+	{
+		.id			= 0x4017,
 		.l2_page_size		= 8,
 		.pages_per_sector	= 16,
 		.sectors_per_block	= 16,
 		.nr_blocks		= 128,
 		.name			= "W25Q64",
 	},
+	{
+		.id			= 0x4018,
+		.l2_page_size		= 8,
+		.pages_per_sector	= 16,
+		.sectors_per_block	= 16,
+		.nr_blocks		= 256,
+		.name			= "W25Q128",
+	},
 };
 
 static int winbond_wait_ready(struct spi_flash *flash, unsigned long timeout)
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index e06896fea71..43a3d79dc56 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -243,8 +243,35 @@ static int gen_get_link_speed(int phy_addr)
 {
 	u_int16_t	tmp;
 
-	if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) && (tmp & 0x04))
+	if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) &&
+			(tmp & 0x04)) {
+#if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \
+		defined(CONFIG_MACH_DAVINCI_DA850_EVM)
+		davinci_eth_phy_read(phy_addr, PHY_ANLPAR, &tmp);
+
+		/* Speed doesn't matter, there is no setting for it in EMAC. */
+		if (tmp & (PHY_ANLPAR_TXFD | PHY_ANLPAR_10FD)) {
+			/* set EMAC for Full Duplex  */
+			writel(EMAC_MACCONTROL_MIIEN_ENABLE |
+					EMAC_MACCONTROL_FULLDUPLEX_ENABLE,
+					&adap_emac->MACCONTROL);
+		} else {
+			/*set EMAC for Half Duplex  */
+			writel(EMAC_MACCONTROL_MIIEN_ENABLE,
+					&adap_emac->MACCONTROL);
+		}
+
+		if (tmp & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX))
+			writel(readl(&adap_emac->MACCONTROL) |
+					EMAC_MACCONTROL_RMIISPEED_100,
+					 &adap_emac->MACCONTROL);
+		else
+			writel(readl(&adap_emac->MACCONTROL) &
+					~EMAC_MACCONTROL_RMIISPEED_100,
+					 &adap_emac->MACCONTROL);
+#endif
 		return(1);
+	}
 
 	return(0);
 }
@@ -326,6 +353,12 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
 	}
 #endif
 
+#if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \
+	defined(CONFIG_MACH_DAVINCI_DA850_EVM)
+	adap_ewrap->c0rxen = adap_ewrap->c1rxen = adap_ewrap->c2rxen = 0;
+	adap_ewrap->c0txen = adap_ewrap->c1txen = adap_ewrap->c2txen = 0;
+	adap_ewrap->c0miscen = adap_ewrap->c1miscen = adap_ewrap->c2miscen = 0;
+#endif
 	rx_desc = emac_rx_desc;
 
 	writel(1, &adap_emac->TXCONTROL);
@@ -480,6 +513,12 @@ static void davinci_eth_close(struct eth_device *dev)
 	writel(0, &adap_ewrap->EWCTL);
 #endif
 
+#if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \
+	defined(CONFIG_MACH_DAVINCI_DA850_EVM)
+	adap_ewrap->c0rxen = adap_ewrap->c1rxen = adap_ewrap->c2rxen = 0;
+	adap_ewrap->c0txen = adap_ewrap->c1txen = adap_ewrap->c2txen = 0;
+	adap_ewrap->c0miscen = adap_ewrap->c1miscen = adap_ewrap->c2miscen = 0;
+#endif
 	debug_emac("- emac_close\n");
 }
 
diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c
index cf1da6b6a23..fef57b43377 100644
--- a/drivers/power/twl6030.c
+++ b/drivers/power/twl6030.c
@@ -36,6 +36,54 @@ static inline int twl6030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg)
 	return i2c_read(chip_no, reg, 1, val, 1);
 }
 
+static int twl6030_gpadc_read_channel(u8 channel_no)
+{
+	u8 lsb = 0;
+	u8 msb = 0;
+	int ret = 0;
+
+	ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, &lsb,
+				GPCH0_LSB + channel_no * 2);
+	if (ret)
+		return ret;
+
+	ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, &msb,
+				GPCH0_MSB + channel_no * 2);
+	if (ret)
+		return ret;
+
+	return (msb << 8) | lsb;
+}
+
+static int twl6030_gpadc_sw2_trigger(void)
+{
+	u8 val;
+	int ret = 0;
+
+	ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, CTRL_P2_SP2, CTRL_P2);
+	if (ret)
+		return ret;
+
+	/* Waiting until the SW1 conversion ends*/
+	val =  CTRL_P2_BUSY;
+
+	while (!((val & CTRL_P2_EOCP2) && (!(val & CTRL_P2_BUSY)))) {
+		ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, &val, CTRL_P2);
+		if (ret)
+			return ret;
+		udelay(1000);
+	}
+
+	return 0;
+}
+
+void twl6030_stop_usb_charging(void)
+{
+	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, 0, CONTROLLER_CTRL1);
+
+	return;
+}
+
 void twl6030_start_usb_charging(void)
 {
 	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VICHRG_1500,
@@ -48,17 +96,89 @@ void twl6030_start_usb_charging(void)
 							CHARGERUSB_INT_MASK);
 	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VOREG_4P0,
 							CHARGERUSB_VOREG);
-	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL2_VITERM_100,
+	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL2_VITERM_400,
 							CHARGERUSB_CTRL2);
+	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TERM, CHARGERUSB_CTRL1);
 	/* Enable USB charging */
 	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CONTROLLER_CTRL1_EN_CHARGER,
 							CONTROLLER_CTRL1);
 	return;
 }
 
+int twl6030_get_battery_current(void)
+{
+	int battery_current = 0;
+	u8 msb = 0;
+	u8 lsb = 0;
+
+	twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, &msb, FG_REG_11);
+	twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, &lsb, FG_REG_10);
+	battery_current = ((msb << 8) | lsb);
+
+	/* convert 10 bit signed number to 16 bit signed number */
+	if (battery_current >= 0x2000)
+		battery_current = (battery_current - 0x4000);
+
+	battery_current = battery_current * 3000 / 4096;
+	printf("Battery Current: %d mA\n", battery_current);
+
+	return battery_current;
+}
+
+int twl6030_get_battery_voltage(void)
+{
+	int battery_volt = 0;
+	int ret = 0;
+
+	/* Start GPADC SW conversion */
+	ret = twl6030_gpadc_sw2_trigger();
+	if (ret) {
+		printf("Failed to convert battery voltage\n");
+		return ret;
+	}
+
+	/* measure Vbat voltage */
+	battery_volt = twl6030_gpadc_read_channel(7);
+	if (battery_volt < 0) {
+		printf("Failed to read battery voltage\n");
+		return ret;
+	}
+	battery_volt = (battery_volt * 25 * 1000) >> (10 + 2);
+	printf("Battery Voltage: %d mV\n", battery_volt);
+
+	return battery_volt;
+}
+
 void twl6030_init_battery_charging(void)
 {
-	twl6030_start_usb_charging();
+	u8 stat1 = 0;
+	int battery_volt = 0;
+	int ret = 0;
+
+	/* Enable VBAT measurement */
+	twl6030_i2c_write_u8(TWL6030_CHIP_PM, VBAT_MEAS, MISC1);
+
+	/* Enable GPADC module */
+	ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, FGS | GPADCS, TOGGLE1);
+	if (ret) {
+		printf("Failed to enable GPADC\n");
+		return;
+	}
+
+	battery_volt = twl6030_get_battery_voltage();
+	if (battery_volt < 0)
+		return;
+
+	if (battery_volt < 3000)
+		printf("Main battery voltage too low!\n");
+
+	/* Check for the presence of USB charger */
+	twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, &stat1, CONTROLLER_STAT1);
+
+	/* check for battery presence indirectly via Fuel gauge */
+	if ((stat1 & VBUS_DET) && (battery_volt < 3300))
+		twl6030_start_usb_charging();
+
 	return;
 }
 
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index f810fca0907..916d73f9f01 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -57,6 +57,7 @@ COBJS-$(CONFIG_RTC_MPC5200) += mpc5xxx.o
 COBJS-$(CONFIG_RTC_MPC8xx) += mpc8xx.o
 COBJS-$(CONFIG_RTC_PCF8563) += pcf8563.o
 COBJS-$(CONFIG_RTC_PL031) += pl031.o
+COBJS-$(CONFIG_RTC_PT7C4338) += pt7c4338.o
 COBJS-$(CONFIG_RTC_RS5C372A) += rs5c372.o
 COBJS-$(CONFIG_RTC_RTC4543) += rtc4543.o
 COBJS-$(CONFIG_RTC_RX8025) += rx8025.o
diff --git a/drivers/rtc/pt7c4338.c b/drivers/rtc/pt7c4338.c
new file mode 100644
index 00000000000..26e2c1ee60d
--- /dev/null
+++ b/drivers/rtc/pt7c4338.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * Author:	Priyanka Jain <Priyanka.Jain@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file provides Date & Time support (no alarms) for PT7C4338 chip.
+ *
+ * This file is based on drivers/rtc/ds1337.c
+ *
+ * PT7C4338 chip is manufactured by Pericom Technology Inc.
+ * It is a serial real-time clock which provides
+ * 1)Low-power clock/calendar.
+ * 2)Programmable square-wave output.
+ * It has 56 bytes of nonvolatile RAM.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <rtc.h>
+#include <i2c.h>
+
+/* RTC register addresses */
+#define RTC_SEC_REG_ADDR        0x0
+#define RTC_MIN_REG_ADDR        0x1
+#define RTC_HR_REG_ADDR         0x2
+#define RTC_DAY_REG_ADDR        0x3
+#define RTC_DATE_REG_ADDR       0x4
+#define RTC_MON_REG_ADDR        0x5
+#define RTC_YR_REG_ADDR         0x6
+#define RTC_CTL_STAT_REG_ADDR   0x7
+
+/* RTC second register address bit */
+#define RTC_SEC_BIT_CH		0x80	/* Clock Halt (in Register 0) */
+
+/* RTC control and status register bits */
+#define RTC_CTL_STAT_BIT_RS0    0x1	/* Rate select 0 */
+#define RTC_CTL_STAT_BIT_RS1    0x2	/* Rate select 1 */
+#define RTC_CTL_STAT_BIT_SQWE   0x10	/* Square Wave Enable */
+#define RTC_CTL_STAT_BIT_OSF    0x20	/* Oscillator Stop Flag */
+#define RTC_CTL_STAT_BIT_OUT    0x80	/* Output Level Control */
+
+/* RTC reset value */
+#define RTC_PT7C4338_RESET_VAL \
+	(RTC_CTL_STAT_BIT_RS0 | RTC_CTL_STAT_BIT_RS1 | RTC_CTL_STAT_BIT_OUT)
+
+/****** Helper functions ****************************************/
+static u8 rtc_read(u8 reg)
+{
+	return i2c_reg_read(CONFIG_SYS_I2C_RTC_ADDR, reg);
+}
+
+static void rtc_write(u8 reg, u8 val)
+{
+	i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, reg, val);
+}
+/****************************************************************/
+
+/* Get the current time from the RTC */
+int rtc_get(struct rtc_time *tmp)
+{
+	int ret = 0;
+	u8 sec, min, hour, mday, wday, mon, year, ctl_stat;
+
+	ctl_stat = rtc_read(RTC_CTL_STAT_REG_ADDR);
+	sec = rtc_read(RTC_SEC_REG_ADDR);
+	min = rtc_read(RTC_MIN_REG_ADDR);
+	hour = rtc_read(RTC_HR_REG_ADDR);
+	wday = rtc_read(RTC_DAY_REG_ADDR);
+	mday = rtc_read(RTC_DATE_REG_ADDR);
+	mon = rtc_read(RTC_MON_REG_ADDR);
+	year = rtc_read(RTC_YR_REG_ADDR);
+	debug("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
+		"hr: %02x min: %02x sec: %02x control_status: %02x\n",
+		year, mon, mday, wday, hour, min, sec, ctl_stat);
+
+	if (ctl_stat & RTC_CTL_STAT_BIT_OSF) {
+		printf("### Warning: RTC oscillator has stopped\n");
+		/* clear the OSF flag */
+		rtc_write(RTC_CTL_STAT_REG_ADDR,
+			rtc_read(RTC_CTL_STAT_REG_ADDR)\
+			& ~RTC_CTL_STAT_BIT_OSF);
+		ret = -1;
+	}
+
+	tmp->tm_sec = bcd2bin(sec & 0x7F);
+	tmp->tm_min = bcd2bin(min & 0x7F);
+	tmp->tm_hour = bcd2bin(hour & 0x3F);
+	tmp->tm_mday = bcd2bin(mday & 0x3F);
+	tmp->tm_mon = bcd2bin(mon & 0x1F);
+	tmp->tm_year = bcd2bin(year) + 2000;
+	tmp->tm_wday = bcd2bin((wday - 1) & 0x07);
+	tmp->tm_yday = 0;
+	tmp->tm_isdst = 0;
+	debug("Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+	return ret;
+}
+
+/* Set the RTC */
+int rtc_set(struct rtc_time *tmp)
+{
+	debug("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+	rtc_write(RTC_YR_REG_ADDR, bin2bcd(tmp->tm_year % 100));
+	rtc_write(RTC_MON_REG_ADDR, bin2bcd(tmp->tm_mon));
+	rtc_write(RTC_DAY_REG_ADDR, bin2bcd(tmp->tm_wday + 1));
+	rtc_write(RTC_DATE_REG_ADDR, bin2bcd(tmp->tm_mday));
+	rtc_write(RTC_HR_REG_ADDR, bin2bcd(tmp->tm_hour));
+	rtc_write(RTC_MIN_REG_ADDR, bin2bcd(tmp->tm_min));
+	rtc_write(RTC_SEC_REG_ADDR, bin2bcd(tmp->tm_sec));
+
+	return 0;
+}
+
+/* Reset the RTC */
+void rtc_reset(void)
+{
+	rtc_write(RTC_SEC_REG_ADDR, 0x00);	/* clearing Clock Halt	*/
+	rtc_write(RTC_CTL_STAT_REG_ADDR, RTC_PT7C4338_RESET_VAL);
+}
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 32f24dee50e..8eeb48fb2a9 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -24,9 +24,13 @@
 #define serial_in(y) 	readb(y)
 #endif
 
+#ifndef CONFIG_SYS_NS16550_IER
+#define CONFIG_SYS_NS16550_IER  0x00
+#endif /* CONFIG_SYS_NS16550_IER */
+
 void NS16550_init (NS16550_t com_port, int baud_divisor)
 {
-	serial_out(0x00, &com_port->ier);
+	serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
 #if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)
 	serial_out(0x7, &com_port->mdr1);	/* mode select reset TL16C750*/
 #endif
@@ -52,7 +56,7 @@ void NS16550_init (NS16550_t com_port, int baud_divisor)
 #ifndef CONFIG_NS16550_MIN_FUNCTIONS
 void NS16550_reinit (NS16550_t com_port, int baud_divisor)
 {
-	serial_out(0x00, &com_port->ier);
+	serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
 	serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
 	serial_out(0, &com_port->dll);
 	serial_out(0, &com_port->dlm);
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index 1073ac0ae9c..cd3439ee6a2 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -29,9 +29,10 @@
 #endif
 #ifdef CONFIG_KIRKWOOD
 #include <asm/arch/kirkwood.h>
-#endif
-#ifdef CONFIG_ORION5X
+#elif defined(CONFIG_ORION5X)
 #include <asm/arch/orion5x.h>
+#elif defined(CONFIG_ARMADA100)
+#include <asm/arch/armada100.h>
 #endif
 
 #if defined (CONFIG_SERIAL_MULTI)
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index c0ae9472424..5dfcde87747 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -47,14 +47,20 @@ static int pl01x_tstc (int portnum);
 unsigned int baudrate = CONFIG_BAUDRATE;
 DECLARE_GLOBAL_DATA_PTR;
 
+static struct pl01x_regs *pl01x_get_regs(int portnum)
+{
+	return (struct pl01x_regs *) port[portnum];
+}
+
 #ifdef CONFIG_PL010_SERIAL
 
 int serial_init (void)
 {
+	struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT);
 	unsigned int divisor;
 
 	/* First, disable everything */
-	writel(0x0, port[CONSOLE_PORT] + UART_PL010_CR);
+	writel(0, &regs->pl010_cr);
 
 	/* Set baud rate */
 	switch (baudrate) {
@@ -82,15 +88,14 @@ int serial_init (void)
 		divisor = UART_PL010_BAUD_38400;
 	}
 
-	writel(((divisor & 0xf00) >> 8), port[CONSOLE_PORT] + UART_PL010_LCRM);
-	writel((divisor & 0xff), port[CONSOLE_PORT] + UART_PL010_LCRL);
+	writel((divisor & 0xf00) >> 8, &regs->pl010_lcrm);
+	writel(divisor & 0xff, &regs->pl010_lcrl);
 
 	/* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */
-	writel((UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN),
-		port[CONSOLE_PORT] + UART_PL010_LCRH);
+	writel(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN, &regs->pl010_lcrh);
 
 	/* Finally, enable the UART */
-	writel((UART_PL010_CR_UARTEN), port[CONSOLE_PORT] + UART_PL010_CR);
+	writel(UART_PL010_CR_UARTEN, &regs->pl010_cr);
 
 	return 0;
 }
@@ -101,13 +106,14 @@ int serial_init (void)
 
 int serial_init (void)
 {
+	struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT);
 	unsigned int temp;
 	unsigned int divider;
 	unsigned int remainder;
 	unsigned int fraction;
 
 	/* First, disable everything */
-	writel(0x0, port[CONSOLE_PORT] + UART_PL011_CR);
+	writel(0, &regs->pl011_cr);
 
 	/*
 	 * Set baud rate
@@ -121,16 +127,16 @@ int serial_init (void)
 	temp = (8 * remainder) / baudrate;
 	fraction = (temp >> 1) + (temp & 1);
 
-	writel(divider, port[CONSOLE_PORT] + UART_PL011_IBRD);
-	writel(fraction, port[CONSOLE_PORT] + UART_PL011_FBRD);
+	writel(divider, &regs->pl011_ibrd);
+	writel(fraction, &regs->pl011_fbrd);
 
 	/* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */
-	writel((UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN),
-		port[CONSOLE_PORT] + UART_PL011_LCRH);
+	writel(UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN,
+	       &regs->pl011_lcrh);
 
 	/* Finally, enable the UART */
-	writel((UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE),
-		port[CONSOLE_PORT] + UART_PL011_CR);
+	writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE,
+	       &regs->pl011_cr);
 
 	return 0;
 }
@@ -170,28 +176,31 @@ void serial_setbrg (void)
 
 static void pl01x_putc (int portnum, char c)
 {
+	struct pl01x_regs *regs = pl01x_get_regs(portnum);
+
 	/* Wait until there is space in the FIFO */
-	while (readl(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF)
+	while (readl(&regs->fr) & UART_PL01x_FR_TXFF)
 		WATCHDOG_RESET();
 
 	/* Send the character */
-	writel(c, port[portnum] + UART_PL01x_DR);
+	writel(c, &regs->dr);
 }
 
 static int pl01x_getc (int portnum)
 {
+	struct pl01x_regs *regs = pl01x_get_regs(portnum);
 	unsigned int data;
 
 	/* Wait until there is data in the FIFO */
-	while (readl(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE)
+	while (readl(&regs->fr) & UART_PL01x_FR_RXFE)
 		WATCHDOG_RESET();
 
-	data = readl(port[portnum] + UART_PL01x_DR);
+	data = readl(&regs->dr);
 
 	/* Check for an error flag */
 	if (data & 0xFFFFFF00) {
 		/* Clear the error */
-		writel(0xFFFFFFFF, port[portnum] + UART_PL01x_ECR);
+		writel(0xFFFFFFFF, &regs->ecr);
 		return -1;
 	}
 
@@ -200,7 +209,8 @@ static int pl01x_getc (int portnum)
 
 static int pl01x_tstc (int portnum)
 {
+	struct pl01x_regs *regs = pl01x_get_regs(portnum);
+
 	WATCHDOG_RESET();
-	return !(readl(port[portnum] + UART_PL01x_FR) &
-		 UART_PL01x_FR_RXFE);
+	return !(readl(&regs->fr) & UART_PL01x_FR_RXFE);
 }
diff --git a/drivers/serial/serial_pl01x.h b/drivers/serial/serial_pl01x.h
index 5f20fdd108a..b670c24e11f 100644
--- a/drivers/serial/serial_pl01x.h
+++ b/drivers/serial/serial_pl01x.h
@@ -29,10 +29,28 @@
  *  Definitions common to both PL010 & PL011
  *
  */
-#define UART_PL01x_DR                   0x00	 /*  Data read or written from the interface. */
-#define UART_PL01x_RSR                  0x04	 /*  Receive status register (Read). */
-#define UART_PL01x_ECR                  0x04	 /*  Error clear register (Write). */
-#define UART_PL01x_FR                   0x18	 /*  Flag register (Read only). */
+
+#ifndef __ASSEMBLY__
+/*
+ * We can use a combined structure for PL010 and PL011, because they overlap
+ * only in common registers.
+ */
+struct pl01x_regs {
+	u32	dr;		/* 0x00 Data register */
+	u32	ecr;		/* 0x04 Error clear register (Write) */
+	u32	pl010_lcrh;	/* 0x08 Line control register, high byte */
+	u32	pl010_lcrm;	/* 0x0C Line control register, middle byte */
+	u32	pl010_lcrl;	/* 0x10 Line control register, low byte */
+	u32	pl010_cr;	/* 0x14 Control register */
+	u32	fr;		/* 0x18 Flag register (Read only) */
+	u32	reserved;
+	u32	ilpr;		/* 0x20 IrDA low-power counter register */
+	u32	pl011_ibrd;	/* 0x24 Integer baud rate register */
+	u32	pl011_fbrd;	/* 0x28 Fractional baud rate register */
+	u32	pl011_lcrh;	/* 0x2C Line control register */
+	u32	pl011_cr;	/* 0x30 Control register */
+};
+#endif
 
 #define UART_PL01x_RSR_OE               0x08
 #define UART_PL01x_RSR_BE               0x04
@@ -50,14 +68,6 @@
  *  PL010 definitions
  *
  */
-#define UART_PL010_LCRH                 0x08	 /*  Line control register, high byte. */
-#define UART_PL010_LCRM                 0x0C	 /*  Line control register, middle byte. */
-#define UART_PL010_LCRL                 0x10	 /*  Line control register, low byte. */
-#define UART_PL010_CR                   0x14	 /*  Control register. */
-#define UART_PL010_IIR                  0x1C	 /*  Interrupt indentification register (Read). */
-#define UART_PL010_ICR                  0x1C	 /*  Interrupt clear register (Write). */
-#define UART_PL010_ILPR                 0x20	 /*  IrDA low power counter register. */
-
 #define UART_PL010_CR_LPE               (1 << 7)
 #define UART_PL010_CR_RTIE              (1 << 6)
 #define UART_PL010_CR_TIE               (1 << 5)
@@ -93,13 +103,6 @@
  *  PL011 definitions
  *
  */
-#define UART_PL011_IBRD                 0x24
-#define UART_PL011_FBRD                 0x28
-#define UART_PL011_LCRH                 0x2C
-#define UART_PL011_CR                   0x30
-#define UART_PL011_IMSC                 0x38
-#define UART_PL011_PERIPH_ID0           0xFE0
-
 #define UART_PL011_LCRH_SPS             (1 << 7)
 #define UART_PL011_LCRH_WLEN_8          (3 << 5)
 #define UART_PL011_LCRH_WLEN_7          (2 << 5)
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 117ab1988d2..e34a1242392 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -35,6 +35,7 @@ COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
 COBJS-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o
 COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
 COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o
+COBJS-$(CONFIG_OMAP3_SPI) += omap3_spi.o
 COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o
 
 COBJS	:= $(COBJS-y)
diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
new file mode 100644
index 00000000000..af12c0e590b
--- /dev/null
+++ b/drivers/spi/omap3_spi.c
@@ -0,0 +1,352 @@
+/*
+ * Copyright (C) 2010 Dirk Behme <dirk.behme@googlemail.com>
+ *
+ * Driver for McSPI controller on OMAP3. Based on davinci_spi.c
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Parts taken from linux/drivers/spi/omap2_mcspi.c
+ * Copyright (C) 2005, 2006 Nokia Corporation
+ *
+ * Modified by Ruslan Araslanov <ruslan.araslanov@vitecmm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include "omap3_spi.h"
+
+#define WORD_LEN	8
+#define SPI_WAIT_TIMEOUT 3000000;
+
+static void spi_reset(struct omap3_spi_slave *ds)
+{
+	unsigned int tmp;
+
+	writel(OMAP3_MCSPI_SYSCONFIG_SOFTRESET, &ds->regs->sysconfig);
+	do {
+		tmp = readl(&ds->regs->sysstatus);
+	} while (!(tmp & OMAP3_MCSPI_SYSSTATUS_RESETDONE));
+
+	writel(OMAP3_MCSPI_SYSCONFIG_AUTOIDLE |
+				 OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP |
+				 OMAP3_MCSPI_SYSCONFIG_SMARTIDLE,
+				 &ds->regs->sysconfig);
+
+	writel(OMAP3_MCSPI_WAKEUPENABLE_WKEN, &ds->regs->wakeupenable);
+}
+
+void spi_init()
+{
+	/* do nothing */
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+				  unsigned int max_hz, unsigned int mode)
+{
+	struct omap3_spi_slave	*ds;
+
+	ds = malloc(sizeof(struct omap3_spi_slave));
+	if (!ds) {
+		printf("SPI error: malloc of SPI structure failed\n");
+		return NULL;
+	}
+
+	/*
+	 * OMAP3 McSPI (MultiChannel SPI) has 4 busses (modules)
+	 * with different number of chip selects (CS, channels):
+	 * McSPI1 has 4 CS (bus 0, cs 0 - 3)
+	 * McSPI2 has 2 CS (bus 1, cs 0 - 1)
+	 * McSPI3 has 2 CS (bus 2, cs 0 - 1)
+	 * McSPI4 has 1 CS (bus 3, cs 0)
+	 */
+
+	switch (bus) {
+	case 0:
+		ds->regs = (struct mcspi *)OMAP3_MCSPI1_BASE;
+		break;
+	case 1:
+		ds->regs = (struct mcspi *)OMAP3_MCSPI2_BASE;
+		break;
+	case 2:
+		ds->regs = (struct mcspi *)OMAP3_MCSPI3_BASE;
+		break;
+	case 3:
+		ds->regs = (struct mcspi *)OMAP3_MCSPI4_BASE;
+		break;
+	default:
+		printf("SPI error: unsupported bus %i. \
+			Supported busses 0 - 3\n", bus);
+		return NULL;
+	}
+	ds->slave.bus = bus;
+
+	if (((bus == 0) && (cs > 3)) ||
+			((bus == 1) && (cs > 1)) ||
+			((bus == 2) && (cs > 1)) ||
+			((bus == 3) && (cs > 0))) {
+		printf("SPI error: unsupported chip select %i \
+			on bus %i\n", cs, bus);
+		return NULL;
+	}
+	ds->slave.cs = cs;
+
+	if (max_hz > OMAP3_MCSPI_MAX_FREQ) {
+		printf("SPI error: unsupported frequency %i Hz. \
+			Max frequency is 48 Mhz\n", max_hz);
+		return NULL;
+	}
+	ds->freq = max_hz;
+
+	if (mode > SPI_MODE_3) {
+		printf("SPI error: unsupported SPI mode %i\n", mode);
+		return NULL;
+	}
+	ds->mode = mode;
+
+	return &ds->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+	struct omap3_spi_slave *ds = to_omap3_spi(slave);
+
+	free(ds);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+	struct omap3_spi_slave *ds = to_omap3_spi(slave);
+	unsigned int conf, div = 0;
+
+	/* McSPI global module configuration */
+
+	/*
+	 * setup when switching from (reset default) slave mode
+	 * to single-channel master mode
+	 */
+	spi_reset(ds);
+	conf = readl(&ds->regs->modulctrl);
+	conf &= ~(OMAP3_MCSPI_MODULCTRL_STEST | OMAP3_MCSPI_MODULCTRL_MS);
+	conf |= OMAP3_MCSPI_MODULCTRL_SINGLE;
+	writel(conf, &ds->regs->modulctrl);
+
+	/* McSPI individual channel configuration */
+
+	/* Calculate clock divisor. Valid range: 0x0 - 0xC ( /1 - /4096 ) */
+	if (ds->freq) {
+		while (div <= 0xC && (OMAP3_MCSPI_MAX_FREQ / (1 << div))
+					 > ds->freq)
+			div++;
+	} else
+		div = 0xC;
+
+	conf = readl(&ds->regs->channel[ds->slave.cs].chconf);
+
+	/* standard 4-wire master mode:	SCK, MOSI/out, MISO/in, nCS
+	 * REVISIT: this controller could support SPI_3WIRE mode.
+	 */
+	conf &= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1);
+	conf |= OMAP3_MCSPI_CHCONF_DPE0;
+
+	/* wordlength */
+	conf &= ~OMAP3_MCSPI_CHCONF_WL_MASK;
+	conf |= (WORD_LEN - 1) << 7;
+
+	/* set chipselect polarity; manage with FORCE */
+	if (!(ds->mode & SPI_CS_HIGH))
+		conf |= OMAP3_MCSPI_CHCONF_EPOL; /* active-low; normal */
+	else
+		conf &= ~OMAP3_MCSPI_CHCONF_EPOL;
+
+	/* set clock divisor */
+	conf &= ~OMAP3_MCSPI_CHCONF_CLKD_MASK;
+	conf |= div << 2;
+
+	/* set SPI mode 0..3 */
+	if (ds->mode & SPI_CPOL)
+		conf |= OMAP3_MCSPI_CHCONF_POL;
+	else
+		conf &= ~OMAP3_MCSPI_CHCONF_POL;
+	if (ds->mode & SPI_CPHA)
+		conf |= OMAP3_MCSPI_CHCONF_PHA;
+	else
+		conf &= ~OMAP3_MCSPI_CHCONF_PHA;
+
+	/* Transmit & receive mode */
+	conf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
+
+	writel(conf, &ds->regs->channel[ds->slave.cs].chconf);
+
+	return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+	struct omap3_spi_slave *ds = to_omap3_spi(slave);
+
+	/* Reset the SPI hardware */
+	spi_reset(ds);
+}
+
+int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp,
+		    unsigned long flags)
+{
+	struct omap3_spi_slave *ds = to_omap3_spi(slave);
+	int i;
+	int timeout = SPI_WAIT_TIMEOUT;
+	int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
+
+	if (flags & SPI_XFER_BEGIN)
+		writel(OMAP3_MCSPI_CHCTRL_EN,
+		       &ds->regs->channel[ds->slave.cs].chctrl);
+
+	chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
+	chconf |= OMAP3_MCSPI_CHCONF_TRM_TX_ONLY;
+	chconf |= OMAP3_MCSPI_CHCONF_FORCE;
+	writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
+
+	for (i = 0; i < len; i++) {
+		/* wait till TX register is empty (TXS == 1) */
+		while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
+			 OMAP3_MCSPI_CHSTAT_TXS)) {
+			if (--timeout <= 0) {
+				printf("SPI TXS timed out, status=0x%08x\n",
+				       readl(&ds->regs->channel[ds->slave.cs].chstat));
+				return -1;
+			}
+		}
+		/* Write the data */
+		writel(txp[i], &ds->regs->channel[ds->slave.cs].tx);
+	}
+
+	if (flags & SPI_XFER_END) {
+		/* wait to finish of transfer */
+		while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
+			 OMAP3_MCSPI_CHSTAT_EOT));
+
+		chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
+		writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
+
+		writel(0, &ds->regs->channel[ds->slave.cs].chctrl);
+	}
+	return 0;
+}
+
+int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp,
+		   unsigned long flags)
+{
+	struct omap3_spi_slave *ds = to_omap3_spi(slave);
+	int i;
+	int timeout = SPI_WAIT_TIMEOUT;
+	int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
+
+	if (flags & SPI_XFER_BEGIN)
+		writel(OMAP3_MCSPI_CHCTRL_EN,
+		       &ds->regs->channel[ds->slave.cs].chctrl);
+
+	chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
+	chconf |= OMAP3_MCSPI_CHCONF_TRM_RX_ONLY;
+	chconf |= OMAP3_MCSPI_CHCONF_FORCE;
+	writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
+
+	writel(0, &ds->regs->channel[ds->slave.cs].tx);
+
+	for (i = 0; i < len; i++) {
+		/* Wait till RX register contains data (RXS == 1) */
+		while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
+			 OMAP3_MCSPI_CHSTAT_RXS)) {
+			if (--timeout <= 0) {
+				printf("SPI RXS timed out, status=0x%08x\n",
+				       readl(&ds->regs->channel[ds->slave.cs].chstat));
+				return -1;
+			}
+		}
+		/* Read the data */
+		rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx);
+	}
+
+	if (flags & SPI_XFER_END) {
+		chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
+		writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
+
+		writel(0, &ds->regs->channel[ds->slave.cs].chctrl);
+	}
+
+	return 0;
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+	     const void *dout, void *din, unsigned long flags)
+{
+	struct omap3_spi_slave *ds = to_omap3_spi(slave);
+	unsigned int	len;
+	const u8	*txp = dout;
+	u8		*rxp = din;
+	int ret = -1;
+
+	if (bitlen % 8)
+		return -1;
+
+	len = bitlen / 8;
+
+	if (bitlen == 0) {	 /* only change CS */
+		int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
+
+		if (flags & SPI_XFER_BEGIN) {
+			writel(OMAP3_MCSPI_CHCTRL_EN,
+			       &ds->regs->channel[ds->slave.cs].chctrl);
+			chconf |= OMAP3_MCSPI_CHCONF_FORCE;
+			writel(chconf,
+			       &ds->regs->channel[ds->slave.cs].chconf);
+		}
+		if (flags & SPI_XFER_END) {
+			chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
+			writel(chconf,
+			       &ds->regs->channel[ds->slave.cs].chconf);
+			writel(0, &ds->regs->channel[ds->slave.cs].chctrl);
+		}
+		ret = 0;
+	} else {
+		if (dout != NULL)
+			ret = omap3_spi_write(slave, len, txp, flags);
+
+		if (din != NULL)
+			ret = omap3_spi_read(slave, len, rxp, flags);
+	}
+	return ret;
+}
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	return 1;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+}
diff --git a/drivers/spi/omap3_spi.h b/drivers/spi/omap3_spi.h
new file mode 100644
index 00000000000..b8e3a4c44c4
--- /dev/null
+++ b/drivers/spi/omap3_spi.h
@@ -0,0 +1,117 @@
+/*
+ * Register definitions for the OMAP3 McSPI Controller
+ *
+ * Copyright (C) 2010 Dirk Behme <dirk.behme@googlemail.com>
+ *
+ * Parts taken from linux/drivers/spi/omap2_mcspi.c
+ * Copyright (C) 2005, 2006 Nokia Corporation
+ *
+ * Modified by Ruslan Araslanov <ruslan.araslanov@vitecmm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _OMAP3_SPI_H_
+#define _OMAP3_SPI_H_
+
+#define OMAP3_MCSPI1_BASE	0x48098000
+#define OMAP3_MCSPI2_BASE	0x4809A000
+#define OMAP3_MCSPI3_BASE	0x480B8000
+#define OMAP3_MCSPI4_BASE	0x480BA000
+
+#define OMAP3_MCSPI_MAX_FREQ	48000000
+
+/* OMAP3 McSPI registers */
+struct mcspi_channel {
+	unsigned int chconf;		/* 0x2C, 0x40, 0x54, 0x68 */
+	unsigned int chstat;		/* 0x30, 0x44, 0x58, 0x6C */
+	unsigned int chctrl;		/* 0x34, 0x48, 0x5C, 0x70 */
+	unsigned int tx;		/* 0x38, 0x4C, 0x60, 0x74 */
+	unsigned int rx;		/* 0x3C, 0x50, 0x64, 0x78 */
+};
+
+struct mcspi {
+	unsigned char res1[0x10];
+	unsigned int sysconfig;		/* 0x10 */
+	unsigned int sysstatus;		/* 0x14 */
+	unsigned int irqstatus;		/* 0x18 */
+	unsigned int irqenable;		/* 0x1C */
+	unsigned int wakeupenable;	/* 0x20 */
+	unsigned int syst;		/* 0x24 */
+	unsigned int modulctrl;		/* 0x28 */
+	struct mcspi_channel channel[4]; /* channel0: 0x2C - 0x3C, bus 0 & 1 & 2 & 3 */
+					/* channel1: 0x40 - 0x50, bus 0 & 1 */
+					/* channel2: 0x54 - 0x64, bus 0 & 1 */
+					/* channel3: 0x68 - 0x78, bus 0 */
+};
+
+/* per-register bitmasks */
+#define OMAP3_MCSPI_SYSCONFIG_SMARTIDLE (2 << 3)
+#define OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP (1 << 2)
+#define OMAP3_MCSPI_SYSCONFIG_AUTOIDLE	(1 << 0)
+#define OMAP3_MCSPI_SYSCONFIG_SOFTRESET (1 << 1)
+
+#define OMAP3_MCSPI_SYSSTATUS_RESETDONE (1 << 0)
+
+#define OMAP3_MCSPI_MODULCTRL_SINGLE	(1 << 0)
+#define OMAP3_MCSPI_MODULCTRL_MS	(1 << 2)
+#define OMAP3_MCSPI_MODULCTRL_STEST	(1 << 3)
+
+#define OMAP3_MCSPI_CHCONF_PHA		(1 << 0)
+#define OMAP3_MCSPI_CHCONF_POL		(1 << 1)
+#define OMAP3_MCSPI_CHCONF_CLKD_MASK	(0x0f << 2)
+#define OMAP3_MCSPI_CHCONF_EPOL		(1 << 6)
+#define OMAP3_MCSPI_CHCONF_WL_MASK	(0x1f << 7)
+#define OMAP3_MCSPI_CHCONF_TRM_RX_ONLY	(0x01 << 12)
+#define OMAP3_MCSPI_CHCONF_TRM_TX_ONLY	(0x02 << 12)
+#define OMAP3_MCSPI_CHCONF_TRM_MASK	(0x03 << 12)
+#define OMAP3_MCSPI_CHCONF_DMAW		(1 << 14)
+#define OMAP3_MCSPI_CHCONF_DMAR		(1 << 15)
+#define OMAP3_MCSPI_CHCONF_DPE0		(1 << 16)
+#define OMAP3_MCSPI_CHCONF_DPE1		(1 << 17)
+#define OMAP3_MCSPI_CHCONF_IS		(1 << 18)
+#define OMAP3_MCSPI_CHCONF_TURBO	(1 << 19)
+#define OMAP3_MCSPI_CHCONF_FORCE	(1 << 20)
+
+#define OMAP3_MCSPI_CHSTAT_RXS		(1 << 0)
+#define OMAP3_MCSPI_CHSTAT_TXS		(1 << 1)
+#define OMAP3_MCSPI_CHSTAT_EOT		(1 << 2)
+
+#define OMAP3_MCSPI_CHCTRL_EN		(1 << 0)
+
+#define OMAP3_MCSPI_WAKEUPENABLE_WKEN	(1 << 0)
+
+struct omap3_spi_slave {
+	struct spi_slave slave;
+	struct mcspi *regs;
+	unsigned int freq;
+	unsigned int mode;
+};
+
+static inline struct omap3_spi_slave *to_omap3_spi(struct spi_slave *slave)
+{
+	return container_of(slave, struct omap3_spi_slave, slave);
+}
+
+int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp,
+		    unsigned long flags);
+int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp,
+		   unsigned long flags);
+
+#endif /* _OMAP3_SPI_H_ */