nand: yaffs: Remove the "nand write.yaffs" command

This command is only enabled by one board, complicates the NAND code,
and doesn't appear to have been functioning properly for several
years.  If there are no bad blocks in the NAND region being written
nand_write_skip_bad() will take the shortcut of calling nand_write()
which bypasses the special yaffs handling.  This causes invalid YAFFS
data to be written. See
http://lists.denx.de/pipermail/u-boot/2011-September/102830.html for
an example and a potential workaround.

U-Boot still retains the ability to mount and access YAFFS partitions
via CONFIG_YAFFS2.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 12 insertions, 65 deletions

diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index f4877560710..12dd26a33fa 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -580,24 +580,7 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 	if (actual)
 		*actual = 0;
 
-#ifdef CONFIG_CMD_NAND_YAFFS
-	if (flags & WITH_YAFFS_OOB) {
-		if (flags & (~WITH_YAFFS_OOB & ~WITH_WR_VERIFY))
-			return -EINVAL;
-
-		int pages;
-		pages = nand->erasesize / nand->writesize;
-		blocksize = (pages * nand->oobsize) + nand->erasesize;
-		if (*length % (nand->writesize + nand->oobsize)) {
-			printf("Attempt to write incomplete page"
-				" in yaffs mode\n");
-			return -EINVAL;
-		}
-	} else
-#endif
-	{
-		blocksize = nand->erasesize;
-	}
+	blocksize = nand->erasesize;
 
 	/*
 	 * nand_write() handles unaligned, partial page writes.
@@ -666,58 +649,22 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		else
 			write_size = blocksize - block_offset;
 
-#ifdef CONFIG_CMD_NAND_YAFFS
-		if (flags & WITH_YAFFS_OOB) {
-			int page, pages;
-			size_t pagesize = nand->writesize;
-			size_t pagesize_oob = pagesize + nand->oobsize;
-			struct mtd_oob_ops ops;
-
-			ops.len = pagesize;
-			ops.ooblen = nand->oobsize;
-			ops.mode = MTD_OPS_AUTO_OOB;
-			ops.ooboffs = 0;
-
-			pages = write_size / pagesize_oob;
-			for (page = 0; page < pages; page++) {
-				WATCHDOG_RESET();
-
-				ops.datbuf = p_buffer;
-				ops.oobbuf = ops.datbuf + pagesize;
-
-				rval = mtd_write_oob(nand, offset, &ops);
-
-				if ((flags & WITH_WR_VERIFY) && !rval)
-					rval = nand_verify_page_oob(nand,
-							&ops, offset);
-
-				if (rval != 0)
-					break;
-
-				offset += pagesize;
-				p_buffer += pagesize_oob;
-			}
-		}
-		else
-#endif
-		{
-			truncated_write_size = write_size;
+		truncated_write_size = write_size;
 #ifdef CONFIG_CMD_NAND_TRIMFFS
-			if (flags & WITH_DROP_FFS)
-				truncated_write_size = drop_ffs(nand, p_buffer,
-						&write_size);
+		if (flags & WITH_DROP_FFS)
+			truncated_write_size = drop_ffs(nand, p_buffer,
+					&write_size);
 #endif
 
-			rval = nand_write(nand, offset, &truncated_write_size,
-					p_buffer);
+		rval = nand_write(nand, offset, &truncated_write_size,
+				p_buffer);
 
-			if ((flags & WITH_WR_VERIFY) && !rval)
-				rval = nand_verify(nand, offset,
-					truncated_write_size, p_buffer);
+		if ((flags & WITH_WR_VERIFY) && !rval)
+			rval = nand_verify(nand, offset,
+				truncated_write_size, p_buffer);
 
-			offset += write_size;
-			p_buffer += write_size;
-		}
+		offset += write_size;
+		p_buffer += write_size;
 
 		if (rval != 0) {
 			printf("NAND write to offset %llx failed %d\n",